To determine the frequency, amplitude, and period of a flywheel in motion, you can perform the following experiment.
What is the procedure of the experiment?
The following experiment can be used to determine the frequency, amplitude, and period of a moving flywheel:
1. Prepare the apparatus:
Obtain a flywheel and mount it on a stand so it can rotate freely.Connect a motion sensor, such as an accelerometer, to the flywheel and record the data using a computer or data acquisition system.2. Start the flywheel:
Use a motor or other means to start the flywheel rotating.3. Collect data:
Record the motion of the flywheel for a set period of time, typically several seconds.4. Analyze the data:
Use software or manual calculations to determine the frequency, amplitude, and period of the flywheel's motion.The frequency is the number of complete cycles of motion that occur in a given period of time, typically measured in Hertz (Hz).The amplitude is the maximum displacement of the flywheel from its rest position, typically measured in meters.The period is the time it takes for one complete cycle of motion to occur, typically measured in seconds.5. Repeat the experiment:
Repeat the experiment with different initial conditions, such as different speeds or masses, to see how these factors affect the frequency, amplitude, and period.To learn more about flywheel, visit: https://brainly.com/question/12907378
#SPJ1
what are the three essential elements of the toyota production system
1. Just-in-Time production: Making interior materials and parts as needed.
2. Kaizen: Process improvement that is ongoing. Automation that halts production when a problem is found.
Just-in-Time, Kaizen, and Jidoka are the three cornerstones of the Toyota Production System (TPS). When parts and supplies are produced "just-in-time," inventories, waste, and costs are all reduced. Kaizen is the Japanese term for continual process improvement, where all proposals for enhancements are embraced and carried out. Last but not least, Jidoka is an automated mechanism that halts production when a problem is found. These three components work together to form a continuous improvement system that aims to lower costs and raise quality. Many other businesses have adopted the TPS, which has boosted the efficacy and efficiency of their operations.
Learn more about interior here-
brainly.com/question/24735077
#SPJ4
A vehicle's electronic digital fuel gauge is always indicating a full tank. All of the other instrument gauges are operating correctly. Which of the following is the most likely cause of this problem?
Answer:
High resistance in the fuel gauge sender circuit
Explanation:
Brainliest pls
how many numbers exist from 1 to 100 that are divisible by both 5 and 2
Answer:10
Explanation:10,20,30,40,50,60,70,80,90,100
oshould the tools that edabi develops be flexible or structured? what does an empowered managerial class mean for data scientists and engineers building tools?
To enable the empowerment of data scientists and engineers, tools should be adaptable. An empowered management class means more control over information and resources, which promotes innovation and development.
It's crucial to make sure tools are adaptable enough to suit the changing requirements of data scientists and engineers while creating them. This entails developing a system that enables data scientists and engineers to customise tools and data in order to make the necessary adjustments to stay current with emerging trends and technology. An empowered managerial class can foster a more creative and collaborative atmosphere by having more influence over how data and tools are used. This can make sure that data engineers and scientists have the resources and assistance they need to create products that are functional for their company. Data scientists and engineers are also empowered by an empowered managerial class to make educated judgements.
Learn more about data here-
brainly.com/question/11941925
#SPJ4
if i had a wall with 2x4 studs 24"" oc with an r-value of 3.48 and r-38 insulation. what is the u-value of the assembly? show your work
The u-value of the assembly is 0.28 w/m²k. The u value is the rate of transfer of heat through a structure and its unit is w/m²k.
According to the question the R-value = 3.48
As we know,
The R-value is indirectly proportional to the u-value of the assembly
R ∝ 1/U
R = 1/U
Now,
U = 1/R
= 1/3.48
= 0.28 w/m²-k
Know more about Insulation here:
https://brainly.com/question/2619275
#SPJ4
two point charges of equal magnitude q are positioned at z = ±d/2. (a) find the electric field everywhere on the z axis; (b) find the electric field everywhere on the xy plane.
Calculate the flux of the electric field across a square perpendicular to the z-axis, with the corners at (-1,-1,1) (-1,2,1) (2,2,1) and (2,-1,1) Q.
The electric field in a certain region of space has a direction of z and a magnitude equal to E=5xz where x and z are measured from some origin. The electric field is zero at a point on the line connecting the charges, close to the "far" side of the positive charge (on the side away from the negative charge). The zero field point for opposite sign charges will typically be "outside" of the smaller magnitude charge.
Learn more about the electric field
https://brainly.com/question/19878202
#SPJ4
what is often outlined and detailed in maintenance log
Regular maintenance tasks including inspections, repairs, and replacements are frequently recorded and tracked in a maintenance log. The date, type, cost, and outcomes of maintenance are frequently included.
A maintenance log is a record of the routine maintenance tasks performed on a building or piece of equipment. It often includes the date, the kind of maintenance done, the price, and the outcomes. An organisation can use this information to identify issues, increase productivity, and plan for upcoming maintenance requirements. Additionally, it is utilised to maintain a record of the job done so that any issues or problems can be immediately resolved. Additionally, notes concerning prospective issues, such as a worn component or a potential safety concern, may be included in the record. The log should typically be updated following each maintenance task to ensure that records are complete and correct. Maintaining maintenance records can help organisations save time and money while ensuring that equipment and facilities are in good functioning condition.
Learn more about data here-
brainly.com/question/11941925
#SPJ4
the maximum distance that the take-off alternate aerodrome may be from the departure aerodrome, for a non-etops twin-engined aeroplane is:
When it becomes impracticable or unwise to continue to or land at the specified landing aerodrome, an aircraft may go to an alternate airfield that has the required services and facilities, can accommodate aircraft performance requirements, and is operational at the anticipated time of us.
What best define about take-off alternate aerodrome?If the departure aerodrome's meteorological conditions are below the required landing minima or if returning to the departure aerodrome is not feasible for any other reason, a take-off alternate airfield should be mentioned in the operational flight plan.
In the case of two-engine aircraft, such a backup shall be within one hour's flight time at the one-engine-inoperative rate of speed specified in the Aerodrome Operating Manual (AOM) or comparable document.
Therefore, assuming the aircraft mass is the actual mass at take-off and ISA and still-air conditions are in effect.
Learn more about aerodrome here:
https://brainly.com/question/14799250
#SPJ1
how does honor fit into the harker community? prompt essay
Honor is a core value in the Harker community, reflected in the school's Honor Code which promotes trust, integrity, and responsibility.
The concept of honor plays a significant role in the Harker community. Honor represents the shared values and principles that guide individuals and the community as a whole. It is a key component of the culture at Harker and is reflected in the actions and behaviors of students, faculty, and staff.
At Harker, honor is demonstrated through integrity, responsibility, and respect for oneself and others. Students are expected to adhere to a code of conduct that reflects the values of the community and demonstrates their commitment to upholding the principles of honor. This includes acting with honesty, fairness, and respect in all aspects of life, both in and outside of the classroom.
Faculty and staff also play a critical role in fostering a culture of honor at Harker. They serve as role models for students and provide guidance and support as students navigate the challenges of adolescent life. They also promote a sense of community by encouraging students to work together and support one another, fostering a sense of belonging and respect.
Honor is also an integral part of the academic and extracurricular programs at Harker. Students are encouraged to challenge themselves and strive for excellence in all areas of their lives, from academics to sports and the arts. They are recognized for their achievements and encouraged to share their skills and knowledge with others, fostering a sense of pride and accomplishment.
Learn more about integrity here:
https://brainly.com/question/26299672
#SPJ4
please answer the question
Initially, it could just feel like gas pains, an upset stomach, or menstrual cramps. Within an hour or two, it can get so bad that you have trouble breathing or walking due to its continued escalation in intensity. The answer is [tex]$2.20^* 10^{\wedge}-4 \mathrm{~cm}$[/tex].
What is sodium carbonate?Sodium carbonate refers to a class of inorganic substances having the formula Na2CO3x, where x can be any value between 0 and 10. All forms are white, odorless, water-soluble salts that produce alkaline solutions in water. In the past, it was collected from the ashes of plants raised in soils high in salt. Sodium carbonate is sometimes known as soda ash or washing soda. Baking soda is another name for sodium bicarbonate. Sodium and acid combine to form sodium carbonate.It is frequently used in exfoliants, toothpaste, bath oils and salts, bubble bath, moisturizers, and other goods. Sodium carbonate dissolves in water to produce sodium hydroxide, an antacid that counteracts gastric acid, and carbonic acid. Aluminum, textiles, soap, glass, and paper are some products made from it.To learn more about sodium carbonate refer to:
https://brainly.com/question/18458464
#SPJ1
Consider an enzyme that can catalyze an equivalent chemical reaction involving two different substrates, A and B. The kinetics of the enzyme were analyzed using both substrates. Substrate A binds more strongly to the enzyme than Substrate B does. The enzyme also achieves a higher Vmax when Substrate A is used compared to when Substrate B is used. a. If the same concentration of enzyme was used in both experiments, which enzyme has a higher keur? Use the equations we have learned to support your answer. b. For which substrate does the enzyme achieve a higher catalytic efficiency? Use the equations we have learned to support your answer. c. Draw a graph of initial reaction rate versus substrate concentration for both substrates, A and B. Put both lines on the same graph and ensure that each curve has a shape that is consistent with the data presented in this question. Label both axes and label each curve as being either Substrate A or B.
An enzyme will attach itself to one or more molecules of the reactant in order to catalyze the reaction. They are the substrates for the enzyme. One substrate may be converted into a number of products during various reactions.
In some, two substrates combine to form a single, bigger molecule or to swap components. For the substrate, enzymes are extremely selective. As a result, they are ineffective for many types of reactions. Given that the geometry of the enzyme's binding site and the shape of the substrate are quite similar, the lock and key concept is predicated on this. . Reverse transcriptase is an enzyme that catalyzes the conversion of two different types of substrates into one specific end product.
Learn more about substrates
https://brainly.com/question/29091828
#SPJ4
A complex airborne navigating system incorporates a subassembly which unrolls a map of the flight plan synchronously with the movement of the aeroplane. This assembly is bought on very good terms from a subcontractor, but is not always in perfect adjustment
on delivery. The subassemblies can be readjusted on delivery to guarantee accuracy at a cost of Rs. 50 per subassembly. It is not, however, possible to distinguish visually those subassemblies that need adjustment.
Alternatively, the subassemblies can each be tested electronically at a cost of Rs. 10 per subassembly tested. Past experience shows that about 30% of those supplied are defective; the probability of the test indicating a bad adjustment when the subassembly is faulty is 0.8, while the probability that the test indicates a good adjustment when the subassembly is properly adjusted is 0.7. If the adjustment is not made and the subassembly is found to be faulty when the system has its final check, the cost of subsequent rectification will be Rs. 140.
Draw up an appropriate decision tree to show the alternatives open to the purchaser and use it to determine his course of action.
To minimize cost, purchaser should choose to test each subassembly electronically and only readjust the faulty ones, as the expected cost of this option is less than readjusting all or readjusting none.
The problem is to decide whether to readjust all the subassemblies at a cost of Rs. 50 per subassembly or to test each subassembly electronically at a cost of Rs. 10 per subassembly tested. The past experience shows that 30% of the subassemblies are faulty. The probability of the test indicating a bad adjustment when the subassembly is faulty is 0.8, while the probability of the test indicating a good adjustment when the subassembly is properly adjusted is 0.7. If the adjustment is not made and the subassembly is found to be faulty when the system has its final check, the cost of subsequent rectification will be Rs. 140.
The decision tree for this problem can be drawn as follows:
Level 1: Readjust all subassemblies (cost = 50 * number of subassemblies) or test each subassembly (cost = 10 * number of subassemblies)
Level 2 (if readjust all): Final check is passed (no cost) or Final check is failed (cost = 140 * number of failed subassemblies)
Level 2 (if test each): Test result is good (no cost) or Test result is bad (cost = 140 * number of failed subassemblies)
Level 3 (if test result is bad): Subassembly is faulty (cost = 140) or Subassembly is properly adjusted (no cost)
By using the probabilities and costs mentioned in the problem statement, the expected costs for each of the alternatives can be calculated and compared. The alternative with the lower expected cost will be the preferred option.
Learn more about probability here:
https://brainly.com/question/12629667
#SPJ4
(30 points) feedback control requires being able to sense the variable being controlled. because electrical signals can be transmitted, amplified, and processed easily, often we want a sensor whose output is a voltage or current proportional to the variable being measured. describe/explain the principle of operation for a sensor (include the references used for this search) that would give an electrical output proportional to:
There are several types of sensors that can provide an electrical output proportional to a physical variable being measured, including:
Resistance Temperature Detectors (RTDs) - RTDs use the change in resistance of a material with temperature to measure temperature. The most common RTDs use a wire made of platinum, nickel, or copper that has a positive temperature coefficient of resistance.
Thermocouples - Thermocouples use the Seebeck effect, which states that a voltage is generated between two dissimilar metals when a temperature difference exists between the two junctions. This voltage can be used to determine the temperature of one of the junctions.
Strain gauges - Strain gauges use the resistance of a material to measure strain. Strain gauges are typically made of a metal foil, such as nickel, that is bonded to a flexible substrate. As the gauge is subjected to strain, its resistance changes, which can be used to determine the strain.
Linear Variable Differential Transformers (LVDTs) - LVDTs use the principle of electromagnetic induction to measure linear displacement. An LVDT consists of a coil and a core that moves within the coil. The position of the core is proportional to the voltage generated in the coil.
Potentiometers - Potentiometers use the change in resistance of a material with position to measure linear displacement. Potentiometers are typically made of a resistive material, such as carbon, that is attached to a sliding contact. The position of the sliding contact is proportional to the resistance of the material.
Find out more about sensor
brainly.com/question/14637550
#SPJ4
two point charges each experience a 3.05 n electrostatic force when they are 2.95 cm apart. what force will each point charge experience when that separation is quadrupled?
In the case of a quadrupling of spacing, the force will be 0.171875 N.
There exists an electrostatic force between two charges that are far from one another. The electrostatic force is governed by the size of each charge and the distance between them. When two positive or negative charges are combined, they repel one another.
Force [tex]F1 = 2.33 N[/tex].
Separation, [tex]r^{2} = 1.99 cm = 0.0199 m[/tex].
by the equation, [tex]F = k * (q1 * q2) / r^{2}[/tex],
Where r is the distance between the charges, q1 and q2 are the charges, and k is Coulomb's constant.
the force will be inversely proportional to [tex]4^{2} = 16[/tex] times less.
As a result, each point charge will experience the following force when the gap is quadrupled:
[tex](2.75 n) / 16 = 0.171875 n[/tex].
Learn more about quadrupling here
https://brainly.com/question/27602448
#SPJ4
the temperature of a cement rotary kiln is about 1450 c. describe what happens if there is a problem with the temperature control and the burning temperature is reduced to 1100 c.
Note that If there is a problem with the temperature control and the burning temperature of a cement rotary kiln is reduced to 1100°C, it can result in several adverse effects:
Incomplete calcination: The reduction in temperature may not be enough to fully calcine the raw materials, leading to a partially burned clinker.Poor Quality Clinker: The reduced temperature can result in the formation of unwanted compounds in the clinker, causing it to be of lower quality.Lower Production Efficiency: The reduced temperature can slow down the reaction rate and lower the production efficiency of the kiln.What is a Cement Rotary Kiln?Under high temperatures, a rotary kiln is a physically huge process unit used in cement manufacturing where limestone is degraded into calcium oxide, which forms the base of cement clinker particles.
The rotary kiln has several advantages, including the capacity to handle a wide range of wastes, a high working temperature, and continuous mixing of incoming wastes. The downsides include expensive capital and operational expenses, as well as the requirement for trained employees.
Learn more about Cement Rotary Kiln:
https://brainly.com/question/2088820
#SPJ1
You have the following address: 192.16.5.133/29 How many total bits are being used to identify the network, and how many total bits identify the host, write the mask?
Note that the following IP address: 192.16.5.133/29 uses 29 bits for the network and 3 bits for the host. The network mask is 255.255.255.248, which can be written in CIDR notation as "/29".
What is an IP Address?An Internet Protocol address is a numerical identification, such as 192.0.2.1, that is linked to a computer network that communicates using the Internet Protocol. The primary functionalities of an IP address are network interface authentication and location addressing.
Note that in the above address, the first 29 bits identify the network and the last 3 bits identify the host, providing 8 possible addresses within the network. The network mask, 255.255.255.248, is used to separate the network and host portions of the address, making it possible to distinguish between the two and route traffic appropriately.
Learn more about IP Addresses:
https://brainly.com/question/16011753
#SPJ1
Asynchronous communications does not happen in real time.a. True
b. False
Answer:
Asynchronous communication is communication between teammates that do not occur in real-time. To be sure, async communication is nothing new. If you've ever sent an email, replied to a Slack message sent earlier in the day, or simply received and responded to a voicemail, you've engaged in asynchronous communication.
Explanation:
Brainliest pls
using the fact that v1 * v2 = v1^t v2, show the dot product of two free vectors does not depend on the choice of frames in which their coordinates are defined.
The dot product of two vectors is a scalar quantity that only depends on the scalar product of the vectors' components, and not on the choice of reference frame.
The dot product of two vectors, v1 and v2, can be written as:
v1 · v2 = |v1||v2|cosθ
where |v1| and |v2| are the magnitudes of the vectors and θ is the angle between them. The dot product is a scalar quantity, which means that its value does not depend on the orientation of the vectors in space.
If we change the reference frame in which the vectors are defined, their coordinates will change, but their magnitude and orientation in space will not. This means that the dot product of the vectors will remain the same, regardless of the choice of frame.
For example, let's say that v1 and v2 have coordinates (a1, b1, c1) and (a2, b2, c2) in a reference frame S. If we change to a different reference frame S', the coordinates of v1 and v2 in this new frame will be (a1', b1', c1') and (a2', b2', c2').
However, using the property v1 * v2 = v1^t v2, where v1^t is the transpose of v1, the dot product can be calculated as:
v1 · v2 = (a1, b1, c1) * (a2, b2, c2) = (a1a2 + b1b2 + c1c2)
This expression shows that the dot product is a scalar that only depends on the scalar product of the vectors' components, and not on the choice of reference frame.
Therefore, we can conclude that the dot product of two free vectors does not depend on the choice of frames in which their coordinates are defined.
Learn more about scalar quantity here:
https://brainly.com/question/21797532
#SPJ4
Which of the following are ways you can greatly increase your odds of finding useful information when using a search engine? search online for comments about the reputation of the source.
Searching online for comments about the reputation of the source is one of the ways to greatly increase your odds of finding useful information when using a search engine.
Additionally, you can also use advanced search techniques such as Boolean logic, proximity searches, and use of wildcards and quotation marks to refine your search results. You can also filter search results by date, language, and geography, as well as use search engine features such as image and video search, which can help you find more relevant results.
Searching online has many benefits, including increased convenience and accessibility, access to a wide range of information, improved accuracy and timeliness, and cost savings.
Complete question:
Which of the following are ways you can greatly increase your odds of finding useful information when using a search engine?
search online Reference worksLibrariansPeriodical databasesLearn more about search engine:
https://brainly.com/question/512733
#SPJ4
In the following Python commands, what does the 0.99 represent? import scipy.stats as st st.norm.interval(0.99, 0.50, 0.05) Question 2 options: confidence level standard error proportion mean
The 0.99 in the Python commands represents the confidence level.
The confidence level is the probability that the confidence interval calculated from the data contains the true population parameter. In this case, the confidence level is 0.99, meaning that the confidence interval calculated from the data contains the true population parameter with a probability of 0.99.
The confidence level in Python represents the probability that the confidence interval calculated from the data contains the true population parameter. A confidence level of 0.99 means that the confidence interval calculated from the data contains the true population parameter with a probability of 0.99. Confidence levels are typically expressed as a percentage, with higher percentages indicating a greater level of confidence. Higher confidence levels indicate that the results of the analysis are more likely to be accurate.
Learn more about Python commands:
https://brainly.com/question/27950246
#SPJ4
a 6-in.-diameter concrete test cylinder is loaded with a compressive force of 113.1 kips, as shown. determine the stress in the cylinder.
The stress in a concrete test cylinder can be determined by calculating the compressive force acting on the cylinder and dividing it by the cross-sectional area of the cylinder.
The cross-sectional area of the 6-in.-diameter cylinder can be calculated as follows:
A = π * r^2
where r is the radius of the cylinder, given as r = 6 in. / 2 = 3 in.
A = π * 3^2 = 28.26 in.^2
The compressive force acting on the cylinder can be determined from the given value of 113.1 kips.
The stress in the cylinder can be calculated by dividing the compressive force by the cross-sectional area:
σ = F / A = 113.1 kips / 28.26 in.^2 = 4 ksi
This stress is the average normal stress acting on the cylinder. It represents the force per unit area acting on the cylinder due to the applied compressive load.
In conclusion, the stress in a concrete test cylinder can be determined by calculating the compressive force acting on the cylinder and dividing it by the cross-sectional area of the cylinder. In the case of the 6-in.-diameter cylinder loaded with 113.1 kips, the stress was calculated to be 4 ksi. This stress is the average normal stress acting on the cylinder.
To know more about compressive force: https://brainly.com/question/13777640
#SPJ4
A Triangular gutter, whose side include an angle of 60° conveys water at a uniform depth of 4m. If the slope of the bed is 1 in 1000. Find the the rate of water. Take Chezys constant,C=55.
Let x = depth of the gutter
then
18 - 2x = width of the gutter
Cross section area
A = depth x width
= x(18 - 2x)
A = 18x - 2x^2
Axis of symmetry will give x value for max area:
x = -b/(2a)
x = -18/(2x(-2))
x = 4.5 inches is the depth for max area
Max area: 4.5 * 9 = 40.5 sq/in
What is rectangle?It has been defined as two-dimensional geometry in which the angle between the adjacent sides has 90 degrees. It has the type of quadrilateral.
The perimeter of the rectangle is defined as the length of the circumference or outline of the geometry. It is the sum of all side measures.
Therefore, Axis of symmetry will give x value for max area:
x = -b/(2a)
x = -18/(2x(-2))
x = 4.5 inches is the depth for max area
Max area: 4.5 * 9 = 40.5 sq/in
Learn more about symmetry on:
https://brainly.com/question/15970176
#SPJ1
COMPUTER SCIENCE Give the form of each argument. Then prove whether the argument is valid or invalid. For valid arguments, use the rules of inference to prove validity.
(c) I will buy a new car and a new house only if I get a job. I am not going to get a job. ∴ I will not buy a new car.
(d) I will buy a new car and a new house only if I get a job. I am not going to get a job. I will buy a new house. ∴ I will not buy a new car.
The first argument is NOT VALID and the second argument is VALID. In this, we can use Modus TOLLENS and distinctive syllogism, two of the rules of inference.
An argument is composed of a number of opening claims, known as premises, and a conclusion.
If the premises are all true, then the conclusion must also be true, regardless of the statements used as the premises statement variables.
The truth of the premises must logically follow the truth of the conclusion.
c) Suppose, P: I will buy a new car and
Q:buy a new house
R :I get a job.
(P^Q)→R
~R
~P^Q by using the rule of inference of Modus TOLLENS
~(P^Q)≠ ~P
So, the argument is NOT VALID
d) Suppose, P: I will buy a new car and
Q: buy a new house
R: I get a job.
(P^Q)→R
~R
Q
~P^~Q by using the rule of inference of Modus TOLLENS
Q
~P F inferred from the distinctive syllogism
So, the argument is VALID.
To learn more about Modus TOLLENS click here:
brainly.com/question/21053033
#SPJ4
4) You have one kilogram of coal which contains 8.14 kWh of energy a. How much energy content does it contain in J? b. How high could you theoretically lift 1 liter of water with this energy (on earth)? PE=mgh C. To what speed could you theoretically accelerate a car (mass of 1000 kg) with this energy (in km/h)? KE=1/2mv2
a) To convert kilowatt-hours to joules, we multiply by 3.6 x 10⁶ J/kWh. Hence, 1 kilogram of coal contains 8.14 kWh x 3.6 x 10⁶ J/kWh = 29,504,000 J of energy.
b) To lift 1 liter of water, which weighs approximately 1000 g, to a height h, we need to do work equal to the potential energy increase, which is given by PE = mgh, where m is the mass of the water and g is the acceleration due to gravity (approximately 9.8 m/s² on the surface of the Earth). If we have 29,504,000 J of energy, we can calculate the maximum height h that we can lift the water to as follows:
PE = mgh
29,504,000 J = (1000 g) * 9.8 m/s² * h
h = 29,504,000 J / (1000 g * 9.8 m/s²)
h = 30,164 m
So, we could theoretically lift 1 liter of water to a height of approximately 30,164 meters, or nearly 30 kilometers.
c) To calculate the speed that we could theoretically accelerate a car with a mass of 1000 kg, we use the equation for kinetic energy: KE = 1/2 mv². If we have 29,504,000 J of energy, we can calculate the maximum speed v that we could achieve as follows:
KE = 1/2 mv²
29,504,000 J = 1/2 * 1000 kg * v²
v² = 29,504,000 J / (1/2 * 1000 kg)
v² = 59,008,000 J / kg
v = 243.4 m/s
To convert meters per second to kilometers per hour, we multiply by 3.6. Hence,
v (in km/h) = 243.4 m/s * 3.6 = 876.4 km/h
So, we could theoretically accelerate a car with a mass of 1000 kg to a speed of approximately 876.4 km/h.
Learn more about kinetic energy here: https://brainly.com/question/26472013
#SPJ1
Circuit specified with Boolean equations module circuit_bln (x,y,A,B,C,D);
input A,B,C,D;
output x,y;
assign x = A | (B & C) | (~B & C);
assign y = (~B & C) | (B & ~C & ~D)
Boolean circuits are directed acyclic networks with internal nodes (or "gates") that are boolean functions, most frequently and, or, and not, which are considered to be "standard" boolean functions.
The input nodes of a circuit are known as input nodes and are marked with input variables. The output nodes are those having an out-degree of 0. Seven fundamental logic gates are available: AND, OR, XOR, NOT, NAND, NOR, and XNOR. The reason the AND gate is thus named is because it behaves much like the logical "and" operator if 0 is labelled "false" and 1 is labelled "true." The circuit symbol and logic configurations for an AND gate are shown in the accompanying example and table. A. B=Y in Boolean algebra denotes that Y exists when both A and B are true, but not when either of them is true.
To learn more about Boolean click the link below:
brainly.com/question/27892600
#SPJ4
Determine the ratio of areas A1/A2 of the two manometer legs if the change in pressure B of 3.5 kPa gives a corresponding change of 24.5 mm in the level of mercury in the right leg. The pressure in pipe A does not change
The mercury in a manometer raises 13.5 millimeters due to a change in pressure the corresponding pressure is 0.0178 atm.
Manometer is defined as an instrument for measuring the pressure acting on a column of fluid that consists of a U-shaped liquid tube in which the liquid rises to various heights in the two arms due to different pressures acting in the two arms of the tube.
We know that
1 atm = 760 mmHg
So, X atm = 13.5 mmHg
X x 760 = 13.5 x 1
X = 13.5 / 760
X = 0.178 atm
Thus, the mercury in a manometer raises 13.5 millimeters due to a change in pressure the corresponding pressure is 0.0178 atm.
To learn more about manometer, refer to the link below:
brainly.com/question/15009345
#SPJ12
Determine the value of Thevenin voltage.
Answer:
Vth = 48V
Explanation:
Explanation can be found in attached image
Which of the following criteria could a router’s ACL use for denying packets access to a private network? a. Source IP address b. Authentication header c. RTT d. Source MAC address
Specific inbound or outbound traffic can be permitted or prohibited at the subnet level by a network access control list (ACL). Specifically speaking, an access control list (ACL) is a set of rules used to filter network traffic, particularly in computer security settings.
Additionally, ACLs restrict access to particular system objects, such as directories or files, to approved users while granting access to those who are not permitted. Standard, extended, dynamic, reflexive, and time-based ACLs are the four types of ACLs you can utilize for various tasks. Access Control Lists (ACLs) are a group of permit-and-deny restrictions, or rules, that offer security by preventing unauthorized users from accessing particular resources while granting authorized users access.
Learn more about ACLs,
https://brainly.com/question/13195646
#SPJ4
how many rotations of the crankshaft are required to complete each stroke of a four-stroke cycle engine?
a capacitor has a capacitance of 55.0 μf. if you want to store 155 j of electric energy in this capacitor, what potential difference do you need to apply to the plates?
Potential difference need to be apply to plates of capacitors is 5.63.
The capacitor is a two-terminal electrical device that stores energy in the form of electric charges.
C=55.0μf
E=155j
E=1/2cv^2
E=1/2*55.0*v^2=155
v=155*2/55.0=5.63v
potential difference is 5.63v.
The energy stored in a capacitor is nothing but the electric potential energy and is related to the voltage and charge on the capacitor. If the capacitance of a conductor is C, then it is initially uncharged and it acquires a potential difference V when connected to a battery.
Learn more about potential here:-
brainly.com/question/28190118
#SPJ4
