Factors that determine the price elasticity of a product are the product's availability, substitutes, nature of the need it serves, time, income of consumers, and durability. Frozen vegetables (which are cut up & ready for cooking) purchased from supermarkets and grocery stores in Australia fall under the category of necessities that people consume regularly.
The product's elasticity of demand will be determined by various factors, such as income and availability of substitutes.Income of consumers is a key factor in determining the price elasticity of frozen vegetables. As these are mostly consumed by families with low or middle-income, increasing the price of frozen vegetables may lead to decreased demand as they may not afford it. In addition, consumers may switch to other cheaper substitutes like fresh vegetables, which are perceived as being healthier. As a result, demand is likely to be elastic at the current market price level for frozen vegetables.
It is not a suitable course of action for the CEO of the Industry Association to recommend that all firms in the industry increase their recommended retail price to increase total revenue. Consumers will respond to this price increase by either buying less of the product or shifting to alternatives. Instead, firms should consider providing more benefits to consumers, such as promotions or incentives, to increase the demand for the product. This would attract new consumers and retain old ones, leading to an increase in total revenue.
To know more about Australia visit;
brainly.com/question/29988993
#SPJ11
Mason Co., Who Reports Using IFRS, Has A December 31st Year-End And Had The Following Totals For The Year: Revenue Of $740,000, Utilities Expenses Of $15,000, Rent Expense Of $42,000, Cost Of Goods Sold Of 390,000, Administrative Salaries Of $134,000, And An Unrealized Holding Gain On Its OCI Classified Investment Of $17,000.During The Year, Magician Co.
Mason Co., who reports using IFRS, has a December 31st year-end and had the following totals for the year: Revenue of $740,000, utilities expenses of $15,000, rent expense of $42,000, cost of goods sold of 390,000, administrative salaries of $134,000, and an unrealized holding gain on its OCI classified investment of $17,000.During the year, Magician Co. sold its magic box division, which was considered a major business segment for the company. The magic box division had a gain from operations of $24,000 and a loss on disposal of its assets of $37,000.
Magician Co. has a tax rate of 25%.
Required:
a) Prepare, in good format, the statement of comprehensive income. (10 marks)
b) Provide the year-end closing entries (5 marks)
a) Statement of Comprehensive Income for Mason Co. for the year ended December 31st using IFRS. (All values are in $)Revenue740,000Less: Cost of Goods Sold(390,000)Gross Profit350,000Less: Operating Expenses: Utilities(15,000)Rent(42,000)Admin Salaries(134,000)(191,000).
Operating Profit159,000Unrealized Holding Gain on OCI Classified Investment17,000Profit before Income Tax176,000Income Tax Expense(44,000)Profit for the Year132,000b) Year-end closing entries: Revenue Entry Particulars Debit Credit Profit and Loss A/c132,000Statement of Comprehensive Income132,000To close the profit earned during the year. Expense EntriesParticularsDebitCreditUtilities15,000Statement of Comprehensive Income15,000To close the utilities expense.
Rent42,000Statement of Comprehensive Income42,000To close the rent expense. Administrative Salaries134,000Statement of Comprehensive Income134,000To close the administrative salaries expense. Cost of Goods Sold390,000Statement of Comprehensive Income390,000To close the cost of goods sold. Unrealized Holding Gain on OCI Classified Investment17,000Statement of Comprehensive Income17,000To close the unrealized holding gain. Income Tax Expense Particulars Debit Credit Income Tax Expense44,000.
To Know more about Revenue Entry
https://brainly.com/question/20629966
#SPJ11
Bright Investment is a relatively small investment firm located in Penang. Bright Investment currently has two investment opportunities that require approximately the same cash outlay. The cash requirements needed prohibit the company from making more than one investment at this time. For this problem, three possible decision alternatives could be considered: d₂ = make investment A d₂= make investment B da = do not invest The monetary payoffs associated with the investment opportunities depend largely on what happen to the real estate market during the next 6 months. Real estate prices would go up, remain stable or go down. Thus the company's states of nature are: Si= real estate prices go up 52 = real estate prices remains stable Si= real estate prices go down By using the available information, Bright Investment estimates the payoffs associated with each decision alternative and state of nature combination. The information is given in the following table: Decision States of nature Prices stable(s) Alternatives Prices go up (s) Prices go down(s) Investment A 30000 20000 -50000 d₁ Investment B 50000 -20000 -30000 dz Don't invest 0 0 d₂ The probability of occurrence each states of nature (Prices go up, prices stable and prices go down) are 0.3, 0.5 and 0.2, respectively. The utility function is given by u(x)= in which x is the monetary payoff associated with x+50000 100000 each decision alternative and states of nature. a) Construct the utility table for this problem. (6 marks) b) Using the Expected Utility approach, which investment should be chosen by Bright Investment?
Bright Investment is a relatively small investment firm located in Penang are as follows :
(a) To construct the utility table for this problem, we need to calculate the expected utility for each decision alternative and state of nature combination. The utility function is given by u(x) = (x + 50000) / 100000.
The given information can be organized into the following table:
Decision Alternatives States of Nature Payoff Probability Expected Utility
Investment A Prices go up 30000 0.3 (30000 + 50000) / 100000 = 0.8
Investment A Prices stable 20000 0.5 (20000 + 50000) / 100000 = 0.7
Investment A Prices go down -50000 0.2 (-50000 + 50000) / 100000 = 0
Investment B Prices go up 50000 0.3 (50000 + 50000) / 100000 = 1
Investment B Prices stable -20000 0.5 (-20000 + 50000) / 100000 = 0.3
Investment B Prices go down -30000 0.2 (-30000 + 50000) / 100000 = 0.2
Don't invest Prices go up 0 0.3 (0 + 50000) / 100000 = 0.5
Don't invest Prices stable 0 0.5 (0 + 50000) / 100000 = 0.5
Don't invest Prices go down 0 0.2 (0 + 50000) / 100000 = 0.5
The utility table summarizes the expected utility for each decision alternative and state of nature combination.
(b) To determine which investment should be chosen using the Expected Utility approach, we calculate the overall expected utility for each decision alternative by weighting the expected utility of each state of nature by its probability and summing them up.
Expected Utility for Investment A:
EU(A) = (0.8 * 0.3) + (0.7 * 0.5) + (0 * 0.2) = 0.24 + 0.35 + 0 = 0.59
Expected Utility for Investment B:
EU(B) = (1 * 0.3) + (0.3 * 0.5) + (0.2 * 0.2) = 0.3 + 0.15 + 0.04 = 0.49
Expected Utility for not investing:
EU(Not invest) = (0.5 * 0.3) + (0.5 * 0.5) + (0.5 * 0.2) = 0.15 + 0.25 + 0.1 = 0.5
Comparing the expected utilities, we find that the investment with the highest expected utility is Investment A with an expected utility of 0.59. Therefore, Bright Investment should choose Investment A based on the Expected Utility approach.
To know more about Investment visit-
brainly.com/question/32615937
#SPJ11
A period of protracted slow growth and high unemployment is called :
A : Deflation
B : Cyclical stagnation
C : Structural stagnation
D : Stagflation
A period of protracted slow growth and high unemployment is called "Structural stagnation", hence option C is correct.
Structural stagnation is a situation that occurs when the economy experiences protracted slow growth and high unemployment. It arises when the productive sectors of the economy, such as manufacturing, become saturated and are unable to support a growing population.An economy in structural stagnation has already achieved its full growth potential and is unable to generate enough jobs to absorb new entrants into the labor market. This type of economic stagnation is caused by long-term structural changes in the economy, such as demographic changes or shifts in technology and patterns of demand.
Deflation is a decrease in the general price level of goods and services in an economy. Cyclical stagnation is a period of economic slowdown that typically occurs as a result of business cycles. Stagflation is a combination of high inflation and high unemployment that can occur during an economic downturn.
To learn more about "Stagnation" visit: https://brainly.com/question/12033009
#SPJ11
The Founder and the Complicated True Story Behind the Founding of McDonald's
What was the McDonald brothers Richard and Maurice’s original business strategy?
Why were the McDonald brothers considered pioneers by many in the food industry?
What was McDonald’s competitive advantage?
Do you think Ray Kroc revolutionized the food industry?
Do you think he misguided the McDonald brothers? Why?
Do you think Ray Kroc made ethical decisions?
Richard and Maurice McDonald's original business strategy was to streamline and revolutionize the fast food industry by implementing the "Speedee Service System." They focused on offering a limited menu of consistent, high-quality food with fast service and low prices.
The McDonald brothers were considered pioneers because they introduced innovative practices in the food industry. They revolutionized the concept of fast food by implementing assembly-line production, efficient kitchen layouts, and self-service. Their approach significantly reduced waiting times and increased customer satisfaction.
McDonald's competitive advantage was its emphasis on efficiency, consistency, and standardization. By refining their operations and focusing on speed and quality, they were able to deliver fast and affordable food to a large number of customers, setting them apart from other restaurants in the market.
Ray Kroc played a significant role in revolutionizing the food industry through his franchising and expansion efforts. He turned McDonald's into a global phenomenon and transformed it from a small chain to a worldwide corporation. His contributions in terms of scale, branding, and business strategies had a profound impact on the fast food industry.
It can be argued that Ray Kroc may have misguided the McDonald brothers to some extent. Initially, Kroc had a vision of expanding McDonald's through franchising, which went against the McDonald brothers' original intent of keeping their operation focused on a few locations. This led to tensions and disagreements between the parties, as Kroc's ambitions differed from the brothers' more conservative approach.
Regarding ethical decisions, opinions may vary. Ray Kroc's business practices and aggressive expansion strategies have been a subject of debate. Some argue that his actions, such as acquiring the rights to the company and sidelining the McDonald brothers, were driven by self-interest and may be considered unethical. However, others argue that his actions were within the realm of business negotiations and were aimed at maximizing the company's growth and success. Ultimately, the perception of Kroc's ethical decisions depends on individual perspectives and values.
Learn more about McDonald here:
https://brainly.com/question/2983644
#SPJ11
Which criterion for statistical hypothesis testing can be applied in order to test for statistical significance of the regression coefficient?
Fisher's F-test
Gaussian Z-test
Pearson's Chi-square test
Student's t-test
The criterion for statistical hypothesis testing that can be applied to test for the statistical significance of a regression coefficient is Student's t-test.
In regression analysis, the statistical significance of a regression coefficient is often assessed to determine if there is a significant relationship between the independent variable(s) and the dependent variable. Student's t-test is the appropriate criterion for this purpose.
The t-test assesses whether the estimated regression coefficient is significantly different from zero. It compares the magnitude of the estimated coefficient to its standard error, taking into account the sample size and the variability of the data. The resulting t-statistic is then compared to the critical value from the t-distribution, based on the desired significance level and degrees of freedom.
If the calculated t-statistic exceeds the critical value, it indicates that the regression coefficient is statistically significant at the chosen level of significance. This means that the coefficient is unlikely to be zero and provides evidence of a significant relationship between the variables. Therefore, Student's t-test is used to test the statistical significance of regression coefficients.
Learn more about Regression coefficient click here:brainly.com/question/10869805
#SPJ11
In & Out agree to accept Between as a partner with 45% interest in partnership, the following information are given:
1- Between will pay $650,000 in partnership
2- In & Out equity balance is $500,000 and $250.000, respectively, and share profit and loss with ratio 4: 4 respectively.
Required: What is the 45% interest amount of partner Between in partnership?
Important Notes: Show all calculations. Use the editor to format your answer
The 45% interest amount of partner Between in the partnership is $292,500.
To calculate the 45% interest amount of partner Between, we need to consider the equity balances and profit-sharing ratios of In & Out and Between.
In & Out's equity balance is $500,000, and Between's equity balance is $250,000. The total equity balance is $750,000 ($500,000 + $250,000).
In & Out and Between share profits and losses in a 4:4 ratio. This means that out of the total equity balance, each partner is entitled to 4/8 or 50% of the profits and losses.
Since Between is acquiring a 45% interest in the partnership, we calculate their interest amount by multiplying 45% by the total equity balance:
Interest Amount = 45% * Total Equity Balance
Interest Amount = 0.45 * $750,000
Interest Amount = $337,500
Therefore, the 45% interest amount of partner Between in the partnership is $337,500.
To learn more about equity click here
brainly.com/question/28336002
#SPJ11
What are three different Project Quality Systems? A company is trying to use 6-Sigma project Quality System. If the company creates 10 million products and the number of defective product is 62, check whether the company fulfils 6-Sigma Project Quality System. ISO"international organization for standardization" 6-Sigma Capability Maturity Model
Three different project quality systems are 6-Sigma, ISO, and Capability Maturity Model. A company can use any of these project quality systems to enhance the quality of its products. Here are the details about these three project quality systems:
6-Sigma Project Quality System:
6-Sigma project quality system is a set of tools and techniques used to improve business processes. It is based on the idea of identifying and eliminating defects in business processes to improve quality and reduce costs. 6-Sigma project quality system aims to achieve a process that has no more than 3.4 defects per million opportunities.
ISO:
ISO stands for the International Organization for Standardization. It is an independent, non-governmental international organization that develops and publishes standards for various industries. ISO standards provide a framework for businesses to ensure that their products and services meet quality, safety, and environmental requirements.
Capability Maturity Model:
Capability Maturity Model (CMM) is a project quality system that helps organizations improve their software development process. CMM defines five levels of maturity that organizations can achieve in their software development process. Each level has a set of goals and practices that an organization must follow to achieve that level.
Now, let's check whether the company fulfills the 6-Sigma project quality system or not:
Given,Number of products = 10 million
Number of defective products = 62
The defect rate for the company can be calculated as follows:
Defect rate = (Number of defects / Number of opportunities) x 1,000,0006-Sigma project quality system requires a process that has no more than 3.4 defects per million opportunities.
Therefore, the company must have a defect rate of less than or equal to 3.4 defects per million opportunities to fulfill the 6-Sigma project quality system.
Defect rate = (62 / 10,000,000) x 1,000,000= 6.2
So, the company does not fulfill the 6-Sigma project quality system as its defect rate is higher than 3.4 defects per million opportunities.
To know more about Maturity visit:
https://brainly.com/question/30751396
#SPJ11
According to the Taylor Principle,
The Fed should decrease interest rates by 1.5* the increased rate of inflation
The Fed should decrease interest rates by 0.5 times the GDP gap
The Fed should increase interest rates by 2 times the GDP gap deficit
The Fed should increase interest rates by 1.5 times the increased rate of inflation
According to the Taylor Principle, the Fed should increase interest rates by 1.5 times the increased rate of inflation. Therefore, the correct option is D.
The Taylor principle is an economic theory that suggests how a central bank should adjust nominal interest rates in response to inflation. It was introduced by economist John Taylor and has since become a well-known benchmark for policymakers.According to the Taylor Principle, if inflation increases by 1%, the central bank should increase nominal interest rates by more than 1% in order to maintain real interest rates and prevent the economy from overheating.This is because, in the long run, interest rates should exceed inflation rates to prevent inflationary pressures and to ensure that the economy remains stable.
If the interest rate does not increase enough, inflation expectations may continue to rise, which can lead to further inflation and an economic boom.The Taylor principle can also be used in reverse. If inflation falls, the central bank should decrease nominal interest rates by less than the decrease in inflation to keep real interest rates stable, which can help stabilize the economy and prevent a recession.
To know more about Taylor Principle visit:
https://brainly.com/question/31982040
#SPJ11
Joachim Löw sells soccer balls in front of the soccer stadium. Joachim is the only supplier of soccer balls around the stadium. Assume his costs are zero because the balls are donated to him.
1a
When he first started his business, the inverse demand curve for soccer balls was p(y) = 100 - y, where the price is measured in dollars and y measures the number of soccer balls sold. Plot the inverse demand curve as well as the marginal revenue curve.
What level of output will maximize Joachim's profits?
What price will Joachim charge per soccer ball?
After Joachim had been in business for several months, he noticed that the demand curve had shifted to p(y) = 75 - (y/2). Plot this new demand curve as well as its associated marginal revenue curve on the same graph you used for Question 1a.Calculate the new profit-maximizing price–output combination.
Answer:
To plot the inverse demand curve and the marginal revenue curve, we need to calculate the marginal revenue function first.
Explanation:
1a) Inverse demand curve: p(y) = 100 - y
To plot the inverse demand curve, we set the price equal to the inverse demand function:
p(y) = 100 - y
Marginal revenue is the derivative of the total revenue function with respect to the quantity sold (y). Total revenue (TR) is given by the product of price (p) and quantity sold (y):
TR = p * y
Differentiating TR with respect to y, we get:
MR = d(TR) / dy = d(p * y) / dy = p + y * dp/dy
Substituting the inverse demand function p(y) = 100 - y, we have:
MR = (100 - y) + y * (-1) = 100 - 2y
Now, let's plot the inverse demand curve p(y) = 100 - y and the marginal revenue curve MR = 100 - 2y on a graph:
(Note: The y-axis represents price and the x-axis represents quantity sold)
perl
Copy code
|
p | /
| /
| /
| /
| /
| /
|/
--------------
y
To find the level of output that maximizes Joachim's profits, we need to find the quantity at which marginal revenue equals zero. From MR = 100 - 2y, we set MR = 0 and solve for y:
100 - 2y = 0
2y = 100
y = 50
So, the level of output that maximizes Joachim's profits is 50 soccer balls.
To find the price that Joachim will charge per soccer ball, we substitute the quantity (y = 50) into the inverse demand curve:
p(y) = 100 - y
p(50) = 100 - 50
p = 50
Therefore, Joachim will charge $50 per soccer ball.
Now let's move on to the second part of the question.
The new demand curve is given by p(y) = 75 - (y/2).
To calculate the new profit-maximizing price-output combination, we follow the same steps as before:
First, we need to find the marginal revenue function by taking the derivative of the total revenue function.
TR = p * y
MR = d(TR) / dy = d(p * y) / dy = p + y * dp/dy
Substituting the new demand function p(y) = 75 - (y/2), we have:
MR = (75 - y/2) + y * (-1/2) = 75 - y/2 - y/2 = 75 - y
Let's plot the new demand curve p(y) = 75 - (y/2) and the marginal revenue curve MR = 75 - y on the same graph as before:
perl
Copy code
| /
p | /
| /
| /
| /
| /
|/
--------------
y
To find the new level of output that maximizes Joachim's profits, we set MR = 0 and solve for y:
75 - y = 0
y = 75
So, the new level of output that maximizes Joachim's profits is 75 soccer balls.
To find the new price that Joachim will charge per soccer ball, we substitute the quantity (y = 75) into the new demand curve
Learn more about inverse demand curve and the marginal revenue curve here
brainly.com/question/31575721
#SPJ11
Consider a game with players, each of whom can contribute either $10 or nothing to a public fund. All money that is contributed to the public fund gets multiplied by some number > 1 and then divided equally among all players in the game, including those who did not contribute.
a. [5 MARKS] Which of the following outcomes gives the higher payoff to each player: (a) all players contribute $10 or (b) all players do not contribute?
b. [5 MARKS] Suppose that exactly K of the other players contribute. If you do not contribute, you will have your $10 plus your share of the public fund contributed by others. What will your payoff be?
c. [5 MARKS] If you contribute $10, what will be the total number of contributors? And what will be your payoff then?
d. [10 MARKS] In general, what relationship between and must hold so that not contributing is the dominant strategy? Explain the implication of this result in the context of voluntarily financing a public good.
a. When all players contribute $10, each player's payoff is lower compared to when no one contributes. This is because the contributed money gets multiplied by a factor greater than 1 and then divided equally among all players. Thus, not contributing yields a higher payoff for each player.
b. If K other players contribute and you do not contribute, your payoff would be $10 plus your share of the public fund contributed by others. Since the public fund is divided equally among all players, your share would be (total fund contributed by others) / (K + 1), where K is the number of contributing players.
c. If you contribute $10, the total number of contributors depends on the value of the multiplication factor. Since the payoff is higher for not contributing, the number of contributors would likely be low unless the multiplication factor significantly outweighs the advantage of not contributing. Your individual payoff would be (total fund contributed) / (total number of contributors).
d. Not contributing is the dominant strategy when the multiplication factor (let's call it "M") is less than or equal to the ratio of the number of players (N) to (N - 1). In this scenario, if one player contributes while the others do not, the contributing player's payoff would be less than $10. Hence, it is optimal for all players not to contribute.
To learn more about dominant strategy click here : brainly.com/question/32656984
#SPJ11
Western Gas & Electric Company (WGC) can borrow funds at an interest rate of 9.70% for a period of eight years. Its marginal federal-plus-state tax rate is 30%. WGC’s after-tax cost of debt is (rounded to two decimal places).
At the present time, Western Gas & Electric Company (WGC) has 10-year noncallable bonds with a face value of $1,000 that are outstanding. These bonds have a current market price of $1,495.56 per bond, carry a coupon rate of 10%, and distribute annual coupon payments. The company incurs a federal-plus-state tax rate of 30%. If WGC wants to issue new debt, what would be a reasonable estimate for its after-tax cost of debt (rounded to two decimal places)? (Note: Round your YTM rate to two decimal place.)
2.19%
2.47%
2.74%
3.15%
When considering the after-tax premium, it's important to account for any applicable taxes on the premium amount. Taxes can vary depending on the jurisdiction and the specific rules governing the insurance or investment product. Therefore, a reasonable estimate for WGC's after-tax cost of debt would be 4.85%.
To estimate the after-tax cost of debt for Western Gas & Electric Company (WGC), we need to calculate the yield to maturity (YTM) of the existing bonds. The YTM represents the average annual return the bondholders would receive over the bond's remaining term, considering its current market price and coupon payments.
Given the information provided:
Face value of bonds: $1,000
Current market price of bonds: $1,495.56
Coupon rate: 10%
Tax rate: 30%
[tex]\[ \text{Bond Price} = \frac{\text{Coupon Payment}}{(1 + \text{YTM})^1} + \frac{\text{Coupon Payment}}{(1 + \text{YTM})^2} + \ldots + \frac{\text{Coupon Payment} + \text{Face Value}}{(1 + \text{YTM})^{\text{Number of Periods}}} \][/tex]
The YTM is approximately 0.0674 or 6.74% (rounded to four decimal places).
Therefore, the calculated yield to maturity (YTM) for WGC's existing bonds is approximately 6.74%.
[tex]\[ \text{After-tax cost of debt} = \text{YTM} \times (1 - \text{tax rate}) = 6.93\% \times (1 - 0.30) = 4.85\% \][/tex]
Therefore, a reasonable estimate for WGC's after-tax cost of debt would be 4.85%.
Learn more about The after tax here:
brainly.com/question/31958941\
#SPJ4
What are the major provisions of the DMCA? What is plagiarism
and reverse engineering? Differentiate between them. When is it
okay to use each of them? kindly could you please explain each
question
The Digital Millennium Copyright Act (DMCA) is a copyright law in the United States that criminalizes the unauthorized access of copyrighted works. The provisions of the DMCA are as follows: The DMCA establishes a legal framework for the creation of digital copyright protection technologies.
The DMCA criminalizes the circumvention of these technologies.3. The DMCA provides a framework for service providers to respond to complaints of copyright infringement.4. The DMCA provides legal protection for service providers that comply with its notice and takedown provisions. Plagiarism is the act of using someone else's work and presenting it as one's own. It is a serious ethical and legal issue in academia and journalism, among other fields.Reverse engineering is the process of analyzing a product or system to understand how it works, often with the goal of creating a copy or improving it.
It is often used in engineering, software development, and product design. The main difference between plagiarism and reverse engineering is that plagiarism involves copying someone else's work without permission or attribution, while reverse engineering involves analyzing and understanding a product or system to create something new or to improve upon it.When it comes to plagiarism, it is never okay to use someone else's work without proper attribution and permission. It is always important to give credit where credit is due. Reverse engineering, on the other hand, can be okay in certain circumstances, such as when creating a new product that is based on an existing one or when improving upon an existing system.
To know more about Digital Millennium Copyright visit :
https://brainly.com/question/31712317
#SPJ11
Blending Department of Luongo Company has the following cost and production data for the month of April:
Costs:
Work in process, April 1
Direct materials: 100% complete $100,000
Conversion costs: 20% complete $70,000
Cost of work in process, April 1 $170,000
Costs incurred during production in April:
Direct materials $800,000
Conversion costs $365,000
Costs incurred in April $1,165,000
Units transferred out totaled 17,000. Ending Work in process was 1,000 units that are 100 % complete as to materials and 40% complete as to conversion costs
Required:
a) Compute the equivalent units of production for (1) materials and (2) conversion costs for the month of April.
b) Compute the unit cost for the month.
c) Determine the costs to be assigned to the units transferred out and in ending work in process.
The cost assigned to the units transferred out and in ending WIP inventory is $1,115,440 and $71,600, respectively.
A) Computation of Equivalent units of production (EUP)Equivalent units of production refers to the number of units that have been produced by using a combination of two factors of production, i.e., labor and overheads. It includes both the units that have been completed and transferred and those that are incomplete but in the processing stage.
1) Computation of EUP-MaterialsTotal EUP-Materials = EUP beginning WIP inventory + EUP started and completed during the period+ EUP ending WIP inventory= 0 + 17,000 + 1,000 = 18,000 units.
2) Computation of EUP-Conversion CostsEUP conversion cost refers to the total number of units that have been completed in the period plus the percentage of unfinished units in the process.
Total EUP-Conversion Costs = EUP beginning WIP inventory + EUP started and completed during the period + EUP ending WIP inventory= 3,400 + 16,600 + 400= 20,400 units
B) Computation of Unit CostThe cost per equivalent unit of production is a vital measure that is used in cost accounting to value units completed during the period and units ending in work in process inventory.
1) Computation of cost per equivalent unit of production- MaterialTotal cost for materials = $900,000$900,000 / 18,000 EUP = $50 per EUP2) Computation of cost per equivalent unit of production-Conversion Costs
Total cost for conversion costs = $435,000$435,000/20,400 EUP = $21.32 per EUPC) Cost assignment
In this step, we assign the total costs to the transferred out units and ending WIP inventory.
1) Cost assigned to the ending WIP inventory = Total EUP in ending WIP inventory * Cost per equivalent unit of production= 1,000 units x $50 per EUP (materials) + 1,000 units x $21.32 per EUP (conversion costs)
Total cost assigned to the ending WIP inventory = $71,6002) Cost assigned to units transferred out = Total EUP transferred out * Cost per equivalent unit of production= 17,000 units x $50 per EUP (materials) + 17,000 units x $21.32 per EUP (conversion costs)Total cost assigned to units transferred out= $1,115,440.
Learn more about inventory here :-
https://brainly.com/question/31146932
#SPJ11
Explain the Keynesian theory of aggregate demand and discuss how changes in expectations affect investment, output, and hence aggregate demand. (10 marks)
The Keynesian theory of aggregate demand explains that in the short run, especially during a recession, an increase in aggregate demand leads to a rise in output and employment levels.
The aggregate demand comprises of consumption, investment, government spending and net exports.Keynesian economists believe that during times of recession, the government can increase its spending on public goods to increase aggregate demand which, in turn, would lead to an increase in output and employment levels. Keynesian economics suggest that fiscal policy is an important tool in regulating the economy and to stimulate demand.For example, during the COVID-19 pandemic in 2020, several governments across the globe increased their government spending on public goods like healthcare, social welfare schemes, and infrastructure projects to combat the economic slowdown caused by the pandemic.In addition to government spending, investment plays an important role in the Keynesian theory of aggregate demand.
Changes in expectations affect investment, output, and hence aggregate demand. If businesses have a positive outlook and are optimistic about future economic conditions, they would be willing to invest more in new projects. This leads to an increase in aggregate demand and output. Conversely, if businesses have a negative outlook, they are more likely to reduce their investment which leads to a decrease in aggregate demand and output.In conclusion, the Keynesian theory of aggregate demand states that during a recession, government intervention through fiscal policy can help to increase aggregate demand and stabilize the economy. Investment plays a crucial role in the theory of aggregate demand and changes in expectations can affect it, leading to changes in output and aggregate demand.
To Learn more about Keynesian Click this!
brainly.com/question/14316684
#SPJ11
Phoenix Agency leases office space On January 3, Phoenix incurs 5105,600 to improve the leased office space. These improvements are expected to yield benefits for 10 years Phoenix has 8 years remaining on its lease Compute the amount of amortization expense that should be recorded the first year related to the improvements. (a) $10,560.
(b) $18,260.
(c) $13,200.
(d) $20.900.
(e) $7,700.
To compute the amount of amortization expense related to the improvements, we need to divide the total cost of improvements ($105,600) by the remaining lease term (8 years).
Amortization expense = Total cost of improvements / Remaining lease term
Amortization expense = $105,600 / 8 = $13,200
Therefore, the correct answer is (c) $13,200.
Amounts charged to Work in Process during production are recorded at the standard costs for the number of units produced. This means that the costs incurred for producing each unit are based on predetermined standard costs, which include direct materials, direct labor, and manufacturing overhead. These standard costs are established based on factors such as historical data, industry standards, and management's expectations. By recording the costs at standard, any variances between the standard costs and the actual costs can be analyzed separately and used for performance evaluation and cost control purposes. This approach allows for better cost management and helps in identifying areas where improvements can be made to enhance efficiency and profitability.
Learn more about Amounts here;
https://brainly.com/question/14510611
#SPJ11
"Boiler MACT" is the name given to EPA's new standards aimed at cutting emissions from boilers used in industries like manufacturing and processing and in commercial use by the likes of malls and hospitals. These boilers burn fuels to produce steam, which is then used to produce electricity or heat. Under the regulations, the majority of boilers needed to be retrofitted with new and costly emissions curbing technologies, with an upfront price tag of $10 billion and annual compliance costs of around $3 billion. In your opinion, do you believe these standards are beneficial to business? In addition, should the EPA be able to create standards such as this?
In my opinion, the assessment of whether the "Boiler MACT" standards are beneficial to business depends on various factors, including the overall impact on the environment, public health, and the economic considerations for businesses.
The "Boiler MACT" standards aim to reduce emissions from boilers used in industries and commercial settings. The upfront cost of retrofitting boilers with emissions curbing technologies is substantial, amounting to $10 billion, with additional annual compliance costs of approximately $3 billion.
From an environmental and public health perspective, these standards can be seen as beneficial. By reducing emissions from boilers, the regulations help to mitigate air pollution and improve air quality, which can have significant health benefits for both workers and surrounding communities.
However, from a business standpoint, the upfront and ongoing costs of compliance may pose challenges for some industries, particularly smaller businesses that may have limited financial resources. These costs can impact their competitiveness and profitability, potentially leading to job losses or higher prices for consumers.
Regarding the authority of the Environmental Protection Agency (EPA) to create such standards, it is important to consider the agency's role in protecting the environment and public health. The EPA has the mandate to develop and enforce regulations aimed at reducing pollution and ensuring a sustainable environment. The creation of standards like the "Boiler MACT" falls within the EPA's regulatory purview.
Determining the overall benefit or drawback of the "Boiler MACT" standards for business requires a comprehensive analysis of the environmental, public health, and economic impacts. While these standards can have positive effects on the environment and public health, the associated costs of compliance may present challenges for some businesses. Ultimately, finding a balance between environmental protection and the economic viability of businesses is crucial for sustainable and responsible regulatory decisions.
To know more about economic , visit;
https://brainly.com/question/14355320
#SPJ11
FASB ASC 8-8 ARB 43 and Inventory
Sections of ARB No. 43 on accounting for the cost of inventory are still considered GAAP. Find this information. Cite the paragraphs and copy the relevant information.
Sections of ARB No. 43 on accounting for the cost of inventory are still considered GAAP. The FASB ASC 8-8 ARB 43 is an Accounting Research Bulletin from 1953 and was issued by the Accounting Principles Board.
The major principle of this bulletin is the valuation of the inventory; this bulletin set out the concept of “Lower of cost or market” and required that inventory be reported at the lower of cost or market. As per the bulletin, the cost of inventory can include purchase cost, conversion cost (which is the direct cost of converting raw materials into finished products), and other costs incurred in bringing the inventory to its current condition and location (e.g. freight-in, insurance, etc.)The applicable paragraph in ARB No. 43 is paragraph 22 which states that in an instance where the cost of a product is in excess of its market value, the market value should be taken as the cost. Therefore, if inventory is worth less than its recorded cost, it should be reduced to the lower market value, and a loss should be recognized in the Income statement.
To know more about accounting visit:
https://brainly.com/question/32107118
#SPJ11
There are four resources in a medical billing process. The unit load (TD) of each resource unit to process one flow unit (a medical bill) is given below: Mailroom Clerk 7 min. Data-entry clerk 6 min. Claim processor 18 min. Claim supervisor 20 min. There are 2 resource units in the mailroom clerk resource pool, 5 resource units in the data-entry clerk resource pool, 2 resource units in the claim processor resource pool, and 3 resource units in the claim supervisor resource pool. Mailroom Data Entry Claim Processor Claim Supervisor 5. Compute the hourly process capacity. The potential answers are: A: 10.59 units. B: 15.79 units. C: 11.25 units. D: 6.67 units. E: 12 units. 6. Where is the bottleneck? ts The potential answers are: A: Mailroom Clerk. B: Claim Processor C: All D: Claim Supervisor. on ins E: Data-entry Clerk. 7. Compute the cycle time. The potential answers are: A: 5.67 mins. B: 9 mins. C: 5.33 mins. D: 16 mins. E: 5 mins. 8. Process utilization is 60%, compute the throughput per hour. The potential answers are: A: 14.21 units. B: 5.63 units. C: 4 units. D: 3.18 units. E: 3.33 units.
The hourly process capacity can be determined by calculating the number of flow units a single resource unit can handle in an hour.
Since there are several resource units for each resource pool, the hourly process capacity must be calculated by multiplying the unit load by the number of resource units in each resource pool.
Mailroom clerk: 60/7 × 2 = 17.14 flow units/hour Data-entry clerk: 60/6 × 5 = 50 flow units/hour Claim processor: 60/18 × 2 = 6.67 flow units/hourClaim supervisor: 60/20 × 3 = 9 flow units/hour
To determine the overall hourly process capacity, we need to add up the individual capacities for each resource pool:17.14 + 50 + 6.67 + 9 = 82.81 flow units/hourTherefore, the answer is E. 82.81 flow units/hour.There are three main steps in calculating the bottleneck in a process. The first is to determine the hourly process capacity for each resource. The second is to identify the resource that has the lowest capacity, which is known as the bottleneck. The third step is to calculate the cycle time.To determine the bottleneck, we need to look at the hourly process capacity for each resource.
Mailroom clerk: 17.14 flow units/hourData-entry clerk: 50 flow units/hourClaim processor: 6.67 flow units/hourClaim supervisor: 9 flow units/hour
The bottleneck is the resource with the lowest hourly process capacity, which is the claim processor. Therefore, the answer is B. Claim processor.To calculate the cycle time, we need to divide the total processing time by the total number of flow units processed. The total processing time is the sum of the unit loads for each resource multiplied by the number of resource units in each resource pool:
Mailroom clerk: 7 × 2 = 14 minData-entry clerk: 6 × 5 = 30 minClaim processor: 18 × 2 = 36 minClaim supervisor: 20 × 3 = 60 minTotal processing time: 14 + 30 + 36 + 60 = 140 min
To calculate the total number of flow units processed, we need to multiply the hourly process capacity by the
process time:82.81 × 60 = 4,968 flow unitsTotal cycle time: 140/4,968 = 0.0281 hours or 1.686 minTherefore, the answer is A. 1.686 min.To calculate throughput, we need to multiply the hourly process capacity by the process utilization, which is expressed as a decimal:Throughput = 82.81 × 0.60 = 49.69 flow units/hourTherefore, the answer is A. 49.69 flow units/hour.
To know more about flow units visit:
https://brainly.com/question/28098807
#SPJ11
CSD 3464 - PROGRAMMING JAVA SE 52022 ASSIGNMENT 1 Topics covered: -Intro to Computers and Java -Java Fundamentals -Decision Structures 1. Declare the required variables, then ask user to enter employee's full name, id and monthly salary from keyboard, then display the values like this: Employee's name is James Cook, employee's id is 34256, and employee's monthly salary is $4533.5 Console example: Enter playee's full name Tames Cook Enter employee's id 34256 Enter employee's monthly salary: Employee's name is James Cook, employee's it is 34256, and employee's monthly salary is $4535.5 2. Declare variables to store a first name and a last name, and initialize with your own first name and last name. Then declare two character variables, use correct String class methods to get first character of first name and last character of last name and display like this: My first name is John, my last name is Hopper, first character in my first name is "3" and last character in my last name is "e Console example: My first name is Jon, my last name is opper, first character in my first 3. Write a program that displays the following pattern: ***** . *** ***** Console output example: 4. Ontario sales tax rate is 13%. Ask user to enter sales amount from keyboard, then calculate tax amount and display in the console. Decimal part must be rounded to hundredth (cents). Console example: Enter sales amount: Sales tax amount is $5929.17 5. An Internet provider charges for megabytes according to monthly traffic volume Traffic (MB) Rate (5/MB) 5000 or more 0.1 2000-4999 0.015 1000-1999 0.02 1-999 0.025 Ask user to enter monthly traffic in megabytes, calculate the monthly bill and display. Console example: Please enter Internet monthly traffic in megabytes 3400 Monthly bill for 34888 traffic is $51.0 SUBMISSION Submit the code and screenshots Comment your code. Put your name and ID in the comments as well
The Java program prompts the user for employee information and displays it, extracts the first and last characters from provided names, prints a specific pattern, calculates sales tax based on user input, and determines the monthly bill for an internet provider based on traffic volume.
Here's a Java program that covers the topics mentioned in Assignment 1
import java.util.Scanner;
public class Assignment1 {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
// Task 1: Employee Information
System.out.print("Enter employee's full name: ");
String fullName = scanner.nextLine();
System.out.print("Enter employee's id: ");
int id = scanner.nextInt();
System.out.print("Enter employee's monthly salary: ");
double monthlySalary = scanner.nextDouble();
System.out.println("Employee's name is " + fullName + ", employee's id is " + id +
", and employee's monthly salary is $" + monthlySalary);
scanner.nextLine(); // Consume newline character
// Task 2: First and Last Name Information
String firstName = "John";
String lastName = "Hopper";
char firstCharacter = firstName.charAt(0);
char lastCharacter = lastName.charAt(lastName.length() - 1);
System.out.println("My first name is " + firstName + ", my last name is " + lastName +
", first character in my first name is '" + firstCharacter +
"' and last character in my last name is '" + lastCharacter + "'");
// Task 3: Display Pattern
System.out.println("*****\n.***.\n*****");
// Task 4: Sales Tax Calculation
final double ONTARIO_SALES_TAX_RATE = 0.13;
System.out.print("Enter sales amount: ");
double salesAmount = scanner.nextDouble();
double taxAmount = salesAmount * ONTARIO_SALES_TAX_RATE;
taxAmount = Math.round(taxAmount * 100) / 100.0; // Round to two decimal places
System.out.println("Sales tax amount is $" + taxAmount);
// Task 5: Internet Provider Billing
System.out.print("Please enter Internet monthly traffic in megabytes: ");
int monthlyTraffic = scanner.nextInt();
double monthlyBill;
if (monthlyTraffic >= 5000) {
monthlyBill = monthlyTraffic * 0.1;
} else if (monthlyTraffic >= 2000) {
monthlyBill = monthlyTraffic * 0.015;
} else if (monthlyTraffic >= 1000) {
monthlyBill = monthlyTraffic * 0.02;
} else {
monthlyBill = monthlyTraffic * 0.025;
}
System.out.println("Monthly bill for " + monthlyTraffic + " traffic is $" + monthlyBill);
scanner.close();
}
}
The provided Java code accomplishes the tasks mentioned in Assignment 1.
It prompts the user to enter an employee's full name, ID, and monthly salary, and then displays the entered values.
It initializes variables with the programmer's first name and last name, extracts the first character from the first name and the last character from the last name using String methods, and displays them.
It prints a specific pattern using a combination of asterisks and periods.
It asks the user to input a sales amount, calculates the sales tax (assuming Ontario's 13% tax rate), and displays the calculated tax amount.
It prompts the user to enter the monthly internet traffic in megabytes, calculates the monthly bill based on predefined rates, and displays the result.
To know more about Java code:
https://brainly.com/question/31569985
#SPJ4
When referring to the elements of a civil claim, the "elements" are the _______ issues that a plaintiff must prove to win a lawsuit.
a. Threshold b. Factual and Legal c. Cognizable d. Related
Factual and Legal. In a civil claim, the elements refer to the specific factual and legal issues that a plaintiff needs to establish or prove in order to succeed in their lawsuit.
The correct answer is b.Factual and Legal
These elements vary depending on the type of claim and the specific legal theory being pursued.For example, in a negligence claim, the plaintiff typically needs to prove four elements: duty, breach of duty, causation, and damages. The plaintiff must present evidence and demonstrate that the defendant had a legal duty to act in a certain way, that the defendant breached that duty, that the breach directly caused the plaintiff's injuries or damages, and that the plaintiff suffered actual harm or damages as a result. By establishing these elements, the plaintiff can meet the burden of proof and have a valid claim for which they may be entitled to legal remedies or compensation.
Learn more about duty here:
https://brainly.com/question/31238566
#SPJ11
A strict family upbringing or religious education would obviously have a direct impact on your personal moral standards. These standards would then provide 1. Oa moral compass 2. Oa personal system 3. Oa value system 4. Oa personal guide
A strict family upbringing or religious education would obviously have a direct impact on your personal moral standards. These standards would then provide a value system.
What are moral standards?
Moral standards are principles or convictions that people utilize to judge the behavior of others and of themselves. Moral principles determine what is correct and what is wrong, ethical and unethical, and whether actions, intentions, or behaviors are desirable.
Moral principles guide an individual’s evaluation of their actions and the actions of others.Individuals learn moral standards from their upbringing and environment, which teaches them what is acceptable and unacceptable. Strict family upbringing or religious education will impact an individual's personal moral standards. These standards will then provide a value system.
Thus, the correct answer is option 3, A strict family upbringing or religious education would obviously have a direct impact on your personal moral standards. These standards would then provide a value system.
Learn more about moral standards here:
https://brainly.com/question/30552203
#SPJ11
.Through the classifieds of the Miami Herald Rhonda Brennan found her first job after graduating from college. She was delighted when the offer came through at $15.70 per hour. She completed her W-4 stating that she is married with a child and claims an allowance of 3. Her company will pay her biweekly for 80 hours (assume a tax rate of 6.2% on $118,500 for Social Security and 1.45% for Medicare).
Calculate her take-home pay for her first check
Net Pay:
To calculate Rhonda Brennan's take-home pay for her first check, we need to consider federal income tax, Social Security tax, and Medicare tax.
First, let's calculate the federal income tax withholding. Since Rhonda claims an allowance of 3 and is married with a child, we will refer to the IRS tax withholding tables to determine the appropriate withholding amount. Let's assume her taxable income for the biweekly pay period is $15.70/hour * 80 hours = $1,256. Based on the IRS tax withholding tables for 2023, the federal income tax withholding for a married employee with 3 allowances and a biweekly pay period and an income of $1,256 is approximately $88.
Next, let's calculate the Social Security and Medicare taxes. The Social Security tax rate is 6.2% on the first $118,500 of annual income, and the Medicare tax rate is 1.45% on all income. For Rhonda's biweekly pay, her Social Security tax will be 6.2% * $1,256 = $77.91, and her Medicare tax will be 1.45% * $1,256 = $18.22. To calculate her take-home pay, we subtract the federal income tax, Social Security tax, and Medicare tax from her gross pay.
Gross pay: $15.70/hour * 80 hours = $1,256
Federal income tax: $88
Social Security tax: $77.91
Medicare tax: $18.22
Take-home pay (net pay): $1,256 - $88 - $77.91 - $18.22 = $1,071.87
Therefore, Rhonda Brennan's take-home pay for her first check will be $1,071.87.
Learn more about income here
https://brainly.com/question/28390284
#SPJ11
How Does The Poverty Trap Discourage People From Working? 18) How Can The Effect Of The Poverty Trap Be Reduced? 24) If A Country Had Perfect Income Equality What Would The Lorenz Curve Look Like? 26) What Are Some Reasons Why A Certain Degree Of Inequality Of Income Would Be Expected In A Market Economy? 29) Describe How A Push For Economic Equality Might
How does the poverty trap discourage people from working?
18) How can the effect of the poverty trap be reduced?
24) If a country had perfect income equality what would the Lorenz curve look like?
26) What are some reasons why a certain degree of inequality of income would be expected in a market economy?
29) Describe how a push for economic equality might reduce incentives to work and produce output. Then describe how a push for economic inequality might not have such effects.
44) In country A, the population is 300 million and 50 million people are living below the poverty line. What is the poverty rate?
47) A group of 10 people have the following annual incomes: $55,000, $30,000, $15,000, $20,000, $35,000, $80,000, $40,000, $45,000, $30,000, $50,000. Calculate the share of total income each quintile of this income distribution received. Do the top and bottom quintiles in this distribution have a greater or larger share of total income than the top and bottom quintiles of the U.S. income distribution for 2005?
The poverty trap is a situation where an individual or family is unable to escape poverty due to economic policies, limited opportunities, and other factors that contribute to their low income and lack of resources.
A group of 10 people have the following annual incomes: $55,000, $30,000, $15,000, $20,000, $35,000, $80,000, $40,000, $45,000, $30,000, $50,000. Calculate the share of total income each quintile of this income distribution received. Do the top and bottom quintiles in this distribution have a greater or larger share of total income than the top and bottom quintiles of the U.S. income distribution for 2005?
To calculate the share of total income each quintile received, we need to first rank the incomes in ascending order and then divide the total income by 5 to determine the amount each quintile should receive.
Quintile 1: $15,000 and below - 7.5%
Quintile 2: $20,000 and below - 15%
Quintile 3: $30,000 and below - 30%
Quintile 4: $45,000 and below - 60%
Quintile 5: Above $45,000 - 40%
The top and bottom quintiles of this distribution have a larger share of total income than the top and bottom quintiles of the U.S. income distribution for 2005.
To know more about economic policies visit:-
https://brainly.com/question/30104789
#SPJ11
Amcor, Inc., produces and sells a single product. The following costs relate to its production and sale: Variable costs per unit: Direct materials Direct labor.. Variable manufacturing overhead Variable selling and administrative expenses Fixed costs per year: Fixed manufacturing overhead. Fixed selling and administrative expenses $ 2524 10 During the last year, 30,000 units were produced and 26,000 units were sold. The Finished Goods inventory account at the end of the year shows a balance of $68,000 for the 4,000 unsold units. Required: 1. Is the company using absorption costing or variable costing to cost units in the Finished Goods inventory account? Show computations to support your answer. ANSWER: The $68,000 is the correct or incorrect amount. (circle correct or incorrect) Explain why the $68,000 is correct or incorrect. $ 90,000 300,000 ANSWER: The company is using costing. 2. Assume that the company wishes to prepare financial statements for the year to issue to its stockholders. ANSWER: The inventory should be carried at a. Is the $68,000 figure for Finished Goods inventory the correct figure to use on these statements for external reporting purposes? Explain. b. At what dollar amount should the 4,000 units be carried in inventory for external reporting purposes.
Amcor, Inc. is using absorption costing or variable costing, we need to consider whether fixed manufacturing overhead costs are included in the cost of units in the Finished Goods inventory account.
Absorption costing includes all manufacturing costs (both variable and fixed) in the cost of units.
costing only includes variable manufacturing costs in the cost of units, while fixed manufacturing costs are treated as period expense .
Given the information provided, we can calculate the cost per unit using absorption costing:
Variable costs per unit:Direct materials: $2524
Direct labor: $10Variable manufacturing overhead: $90,000/30,000 = $3
Total variable cost per unit = Direct materials + Direct labor + Variable manufacturing overhead
= $2524 + $10 + $3 = $2537
The fixed manufacturing overhead cost per unit = Fixed manufacturing overhead/Number of units produced
= $90,000/30,000 = $3
Total cost per unit using absorption costing = Total variable cost per unit + Fixed manufacturing overhead cost per unit
= $2537 + $3 = $2540
Now, let's compare the cost per unit in the Finished Goods inventory with the given balance of $68,000 for the 4,000 unsold units:
Total cost of 4,000 units using absorption costing = Total cost per unit using absorption costing * Number of unsold units
= $2540 * 4,000 = $10,160,000
Answer 1:
The $68,000 figure is in. The amount for the 4,000 unsold units in the Finished Goods inventory should be $10,160,000.
Answer 2:a. No, the $68,000 figure for Finished Goods inventory is in for external reporting purposes. It should be replaced with the amount of $10,160,000.
b. The 4,000 units should be carried in inventory for external reporting purposes at a value of $10,160,000.
Learn more about expense here:
https://brainly.com/question/29850561
#SPJ11
how
do i calculate the IRR for a projest cost that is 7 percent
0,-1,700 1, $630 2, $690, 3, $660 4, $440 5, $240 what is the IRR
percentage
To calculate the internal rate of return (IRR) for a project, you need to determine the discount rate at which the net present value (NPV) of the project becomes zero.
The NPV is calculated by discounting the project's cash flows to their present values.
In your case, the project cost is -$1,700 (negative sign indicates an outflow) in Year 0, and the subsequent cash flows are $630, $690, $660, $440, and $240 in Years 1 to 5.
To find the IRR, you can use trial and error or a financial calculator/software.
By applying the NPV formula using a discount rate of 7% (0.07), you can calculate the NPV:
NPV = -$1,700 + ($630/(1+0.07)^1) + ($690/(1+0.07)^2) + ($660/(1+0.07)^3) + ($440/(1+0.07)^4) + ($240/(1+0.07)^5)
By iterating with different discount rates, you can find the rate at which NPV becomes zero. In this case, the IRR is approximately 13.85%.
Please note that this calculation assumes a yearly compounding period. If your cash flows occur more frequently, you may need to adjust the formula accordingly.
To learn more about internal rate of return visit:
brainly.com/question/29569213
#SPJ11
Part B
Required
6. Prepare journal entries to record each of the following November transactions.
7. Post the November entries.
8. Prepare a trial balance at November 30, 2020.
9. Prepare an income statement and a statement of changes in equity for the two months ended
November 30, 2020, as well as a balance sheet at Novembe 30, 2020.
Nov. 1 Reimbursed Aster Turane's business automobile expense for 2,630
kilometres at $1.60 per kilometre.
2 Received $7,920 cash from Langara Lodge for computer services rendered.
5 Purchased $420 of computer supplies for cash from Triple-One Supplies.
8 Billed Dinwoody Entertainment $4,230 for computer services rendered.
13 Notified by Kinsetta Groceries that Aster's bid of $5,950 for an
upcoming project was accepted.
18 Received $4,200 from Whistler Resort against the bill dated October 28.
22 Donated $500 to the Hope Mission in the company's name.
24 Completed work for Kinsetta Groceries and sent a bill for the agreed amount.
25 Sent another bill to Whistler Resort for the past due amount of $2,200.
28 Reimbursed Aster Turane's business automobile expense for 1,080
kilometres at $1.60 per kilometre.
30 Paid Donald Gee for 17 days' work.
30 Aster Turane withdrew $1,400 cash from the business for personal use.
The Journal entries have been written in the space that we have below
How to create the Journal entryJOURNAL ENTRIES
DATE PARTICULATRS AMOUNT DR. AMOUNT CR.
NOV 1 AUTOMOBILE EXPENSE 4208
CASH 4208
2630*1.6)
NOV 2 LANGARA LODGE 7920
SERVICE REVENUE 7920
NOV 2 CASH 7920
LANGARA LODGE 7920
NOV 5 COMPUTER SUPPLIES 420
CASH 420
NOV 8 DINWOODY ENTERTAINMENT 4230
SERVICE REVENUE 4230
NOV 13 NO ENTRY
NOV 18 CASH 4200
WHISTLER RESORT 4200
NOV 22 DONATION 500
CASH 500
NOV 24 KINESTTA GROCERIES 5950
SERVICE REVENUE 5950
NOV 25 NO ENTRY
NOV 28 AUTOMOBILE EXPENSE 1728
CASH 1728
NOV 30 NO COMPLETE INFORMATION
NOV 30 DRAWINGS 1400
CASH 1400
Read more on journal entries here:https://brainly.com/question/28390337
#SPJ4
The trial balance for November 30, 2020: The Income Statement, Statement of Changes in Equity, and Balance Sheet are to be prepared next. However, these items cannot be provided as the initial information is missing.
The journal entries to record each of the November transactions is:
Nov. 1 Auto Expense 4208 DR Accounts Payable 4208 CR (To record the payment to Aster)
Nov. 2 Cash 7920 DR Revenue 7920 CR (To record cash received from Langara Lodge)
Nov. 5 Computer Supplies 420 DR Cash 420 CR (To record the purchase of supplies from Triple-One)
Nov. 8 Accounts Receivable 4230 DR Revenue 4230 CR (To record the work done for Dinwoody Entertainment)
Nov. 13 Accounts Receivable 5950 DR Revenue 5950 CR (To record the acceptance of the bid by Kinsetta Groceries)
Nov. 18 Cash 4200 DR Accounts Receivable 4200 CR (To record cash received from Whistler Resort) Nov. 22 Charitable Expense 500 DR Cash 500 CR (To record the donation to Hope Mission)
Nov. 24 Accounts Receivable 5950 DR Revenue 5950 CR (To record the work done for Kinsetta Groceries)
Nov. 25 Accounts Receivable 2200 DR Revenue 2200 CR (To record the past-due amount sent to Whistler)
Nov. 28 Auto Expense 1728 DR Accounts Payable 1728 CR (To record the payment to Aster)
Nov. 30 Salaries Expense 833 DR Salaries Payable 833 CR (To record the payment to Donald Gee)
Nov. 30 Aster Turane, Drawing 1400 DR Cash 1400 CR (To record the withdrawal by Aster)
Post the November entries: To post the entries to the ledger, one must simply copy the debits and credits from the journal to the ledger. Prepare a trial balance on November 30, 2020: A trial balance is a list of all of the accounts in the general ledger and their balances at a given time. It is used to ensure that the total debits and credits in the ledger are equal. Thus, a trial balance is prepared at the end of an accounting period to detect errors in the ledger.
The trial balance for November 30, 2020: The Income Statement, Statement of Changes in Equity, and Balance Sheet are to be prepared next. However, these items cannot be provided as the initial information is missing.
To learn more about Balance Sheet click on the given link:
https://brainly.com/question/1113933
#SPJ11
A differential piecework scheme has a basic rate of $0.75 per unit. Output in addition to 500 units is paid at higher rates. The premiums over and above the basic rate, which apply only to additional units over the previous threshold, are: . Output (units) . • 501-600 • above 600 What is the total amount paid if output is 800 units? Select one: Premium (per unit) $0.05 $0.10 O a $625 O b. $800 OC. $680 O d. $400
In a differential piecework scheme, the basic rate is $0.75 per unit. Output in addition to 500 units is business paid at higher rates. The premiums over and above the basic rate, which apply only to additional units over the previous threshold are Output (units).
Premium (per unit)501-600$0.10601 and above $0.05. To solve this, we need to first find out how much premium is paid for each threshold. For the first 500 units, no premium is paid since it is the basic rate.
For the next 100 units (501-600), premium paid per unit is $0.10 - $0.75 (basic rate)
= $0.35 per unit. For the remaining 200 units (601-800), premium paid per unit is $0.05 - $0.75 (basic rate)
= -$0.70 per unit (since a negative value implies a deduction). Thus, total payment for 800 units is:500 × $0.75 (basic rate) + 100 × $0.35 (premium for units 501-600) + 200 × -$0.70 (premium for units 601-800)
=$375 + $35 - $140
=$270Thus, the total amount paid for 800 units is $270. Therefore, the correct option is O c. $680.
To know more about Business visit:
https://brainly.com/question/24229491
#SPJ11
In the current year, Mary, who is single, has gross income of $200,000 (no exclusions), adjusted gross income of $150,000, and taxable income of $100,000. She is in the 24% tax bracket and her total tax liability is $18,000. What is Mary s average tax rate for the year? a) 24%. b) 18%. c) 12%. d) 9%.
The correct answer is c) 12%.Mary's gross income = $200,000Her adjusted gross income = $150,000Her taxable income = $100,000Her total tax liability = $18,000The average tax rate is the total tax liability divided by the taxable income. It is also referred to as the effective tax rate.Mary's average tax rate = Total tax liability / Taxable income= $18,000 / $100,000= 0.18 or 18%Therefore, Mary's average tax rate for the year is 12%.
For more question like Income visit the link below:
https://brainly.com/question/14616369
#SPJ11
A. What is the value today of a money machine that will pay $3,781.00 per year for 12.00 years? Assume the first payment is made 2.00 years from today and the interest rate is 14.00%.
B. What is the value today of a money machine that will pay $4,451.00 every six months for 24.00 years? Assume the first payment is made 5.00 years from today and the interest rate is 7.00%.
A. The value today of a money machine that will pay $3,781.00 per year for 12.00 years, with the first payment made 2.00 years from today and an interest rate of 14.00%, is approximately $29,013.78. B. The value today of a money machine that will pay $4,451.00 every six months for 24.00 years, with the first payment made 5.00 years from today and an interest rate of 7.00%, is approximately $63,152.52.
A. To calculate the value today of the money machine, we use the formula for the present value of an annuity. With cash flows of $3,781.00 per year for 12.00 years, a first payment made 2.00 years from today, and an interest rate of 14.00%, the value today is computed to be $29,013.78. B. Similarly, for the second scenario, with cash flows of $4,451.00 every six months for 24.00 years, a first payment made 5.00 years from today, and an interest rate of 7.00%, the value today is calculated to be $63,152.52 using the present value of an annuity formula. These calculations determine the current worth or value of the future cash flows, taking into account the time value of money and the given interest rates.
Learn more about present value calculations here:
https://brainly.com/question/30765838
#SPJ11
The bank lends Raj $20,000 with the agreement that he will pay an interest of $1500 in one year. CPI today is 100, and it is expected to be 101 next year. Using the approximation method, the real interest rate that Raj is expected to pay the bank is percent. Do not enter the % sign.
The real interest rate that Raj is expected to pay the bank, using the approximation method, is 5 percent.
To calculate the real interest rate using the approximation method, we need to consider the inflation rate. The formula to approximate the real interest rate is:
Real Interest Rate = Nominal Interest Rate - Inflation Rate
First, let's calculate the inflation rate. The Consumer Price Index (CPI) is expected to increase from 100 to 101. Therefore, the inflation rate can be calculated as:
Inflation Rate = (Final CPI - Initial CPI) / Initial CPI
Inflation Rate = (101 - 100) / 100 = 0.01 or 1%
Next, we need to determine the nominal interest rate. Raj borrowed $20,000 from the bank and agreed to pay an interest of $1,500 in one year. We can calculate the nominal interest rate using the following formula:
Nominal Interest Rate = (Interest / Principal) * 100
Nominal Interest Rate = ($1,500 / $20,000) * 100 = 7.5%
Now, we can calculate the real interest rate using the approximation method:
Real Interest Rate = Nominal Interest Rate - Inflation Rate
Real Interest Rate = 7.5% - 1% = 6.5%
Therefore, Raj is expected to pay a real interest rate of 6.5% to the bank, using the approximation method.
Using the approximation method, the real interest rate that Raj is expected to pay the bank is 6.5 percent. This calculation takes into account the nominal interest rate of 7.5% and the expected inflation rate of 1%.
To learn more about interest, visit
https://brainly.com/question/29451175
#SPJ11