discuss the molar mass and identity of your unknown based on the freezing point depression. are you confident in the identity of the unknown referencing % error

In an electric discharge the emission spectra of helium is an example of flame test.  light is released with the energy corresponding to the difference in energy between the higher and lower states.

Electrons are stimulated to something like a higher energy level when a molecule or atom absorbs energy. When the electron returns to the lower energy level, light is released with the energy corresponding to the difference in energy between the higher and lower states.

Because several levels of energy are available, each electron can experience numerous transitions, each of which produces a distinct wavelength that makes up the emission spectrum. In an electric discharge the emission spectra of helium is an example of flame test.

Therefore, in an electric discharge the emission spectra of helium is an example of flame test.

To learn more about emission spectra, here:

https://brainly.com/question/18907409

#SPJ1

The actual yield of the product obtained in the experiment must be divided by the theoretical yield of the product that could be achieved. The reaction's percent yield is 32% as a result.

The amount of product produced in a chemical reaction or manufacturing process is referred to as yield, and it is typically expressed in mass or volume. Theoretical yield, actual yield, and percent yield are a few of the several types of yield. Theoretical yield, under the assumption that the reaction continues to completion without any losses or side reactions, is the greatest quantity of product that can be produced from a specific amount of reactants. The amount of product that is actually produced during an experiment or production process is known as the "actual yield." The actual yield to theoretical yield ratio, stated as a percentage, is known as percent yield. The efficiency and profitability of a chemical reaction or manufacturing process are significantly influenced by yield.

Learn more about yield here:

https://brainly.com/question/2506978

#SPJ4

The ratio of hydrocodone answer for cherry seasoning in the compound can be composed as:

1:2.

The proportion of hydrocodone answer for cherry enhancing in the compound is 1:2. This implies that how much hydrocodone arrangement is utilized is half of how much cherry enhancing is utilized. Proportions are an approach to looking at least two amounts, and they are commonly communicated as a small portion or with a colon. For this situation, the proportion is communicated utilizing a colon to isolate the two amounts. Proportions can be utilized in various settings, from cooking to science to back. In this particular case, the proportion is utilized to guarantee that the perfect proportion of every fixing is being utilized to make the ideal compound.

Learn more about Compound:

https://brainly.com/question/13516179

#SPJ4

Tin being an example of an element that has a great number of naturally occurring isotopes, it has 70 neutrons in total.

Tin-120 is an isotope of tin with an atomic number of 50, which means it has 50 protons in its nucleus. To find the number of neutrons in tin-120, we need to look at its atomic mass, which is typically given in atomic mass units (amu).

The atomic mass of tin-120 is approximately 120 amu. Since the atomic mass of an atom is the sum of its protons and neutrons, we can calculate the number of neutrons in tin-120 by subtracting the atomic number (50) from the atomic mass (120):

number of neutrons = atomic mass - atomic number

= 120 - 50

= 70

Therefore, tin-120 has 70 neutrons.

To learn more about isotopes Click here:

brainly.com/question/21536220

#SPJ4

1. The Earth revolves around the Sun. Theory: This is a scientific theory, which is an explanation supported by a large body of evidence that explains how a natural phenomenon or phenomenon works.

A theory is an explanation or principle that is based on observations, experiments, and logical reasoning. It is an organized system of ideas, concepts, and principles intended to explain how something works or why something happens. Theories are used to explain and predict phenomena and can be used to develop hypotheses, which can then be tested to gain a better understanding of the natural or social world. Theories can be used to understand and explain a wide variety of phenomena in the natural and social sciences, including the behavior of particles, the functioning of the human body, and the social dynamics of large groups of people.

To learn more about theory
https://brainly.com/question/16805203
#SPJ1

If you want to make 0.5 liters (0.5 L) of a 0.01 molar (0.01 M) solution of bromine (Br2) in water, you would need 0.8 moles of bromine.

The number of moles of a substance in a solution can be calculated using the following formula:

mole number = concentration (in M) * volume (in L)

For this solution, we have:

number of moles = 0.01 M * 0.5 L = 0.005 moles.Since bromine is a diatomic molecule, its formula weight is the sum of the atomic weights of its two atoms, which is 2(79.904 g/mol) = 159.808 g/mol.

Therefore, the mass of 0.8 moles of bromine would be:

0.8 moles * 159.808 g/mol = 127.046 g

So, the answer is 1.6 moles or 127.046 grams.

To learn more about moles of a substance here:

https://brainly.com/question/20928252

#SPJ4

From the given information, the formula mass of calcium chloride is 110.98 g/mol, rounded to five significant figures.

To calculate the formula mass of calcium chloride, we need to determine the atomic mass of each element in the compound and then sum them up based on the chemical formula:

Atomic mass of Ca = 40.078 g/mol

Atomic mass of Cl = 35.45 g/mol

The formula mass of calcium chloride (CaCl₂) can be calculated as follows:

Formula mass = (atomic mass of Ca) + 2 x (atomic mass of Cl)

Formula mass = 40.078 g/mol + 2 x 35.45 g/mol

Formula mass = 110.98 g/mol

Learn more about chemical reaction here: brainly.com/question/11231920

#SPJ4

Weak acid (carbonic acid) results when Nitrogen dioxide is dissolved in water contains no impurities.

Carbonic acid is a carbon- containing emulsion which has the chemical formula H2CO3. results of carbon dioxide in water contain small quantities of this emulsion. Its chemical formula can also be written as OC( OH) 2 since there exists one carbon- oxygen double bond in this emulsion.

Carbonic acid is frequently described as a respiratory acid since it's the only acid that's exhaled in the gassy state by the mortal lungs.

Nitrogen dioxide is a chemical emulsion with the formula NO2. It's one of several nitrogen oxides. NO2 is an intermediate in the artificial conflation of nitric acid, millions of tons of which are produced each time for use primarily in the product of diseases. At advanced temperatures it's a sanguine- brown gas.

Learn more about Weak acid:

https://brainly.com/question/29035097

#SPJ4

[tex]13.86 seconds[/tex]  required for 65% of the initial quantity of reactant to be consumed

A first order reaction's rate constant is provided by:

rate = k[A]

A reactant is a substance that participates in a chemical reaction and is changed into a product.

where [A] is the concentration of the reactant.

In this case, the rate constant is given as 0.0450 s-1.

To calculate the time required for 65% of the initial quantity of reactant to be consumed, we can use the following equation:

[tex]t = (\frac{1}{k})[ln(1 - 0.65)][/tex]

Substituting the values, we get:

[tex]t = (\frac{1}{0.0450 s^{-1}})[ln(1 - 0.65)] \\\\t= 13.86 s[/tex]

Therefore, it will take [tex]13.86 seconds[/tex] for 65% of the reactant's original volume to be consumed.

learn more about reactant refer:brainly.com/question/30129541

#SPJ4

Carbonic acid can weather and dissolve calcite, a mineral composed of calcium carbonate. Quartz, a mineral composed of silicon dioxide, is relatively resistant to chemical weathering by carbonic acid.

As per the question given,  

Ferromagnesian (mafic) minerals, such as olivine, pyroxene, and amphibole, may weather and form secondary minerals in the presence of carbonic acid. Feldspars, which are common minerals in igneous rocks and sediments, can undergo chemical weathering by carbonic acid and transform into clay minerals, which are stable at Earth's surface conditions.

What exactly is carbonic acid?

Carbonic acid, with the chemical formula H2CO3, is a carbon-containing substance. This chemical is found in minute concentrations in carbon dioxide solutions in water. Because this combination has one carbon-oxygen double bond, its chemical formula can also be written as OC(OH)2.

For such more questions on Carbonic Acid

https://brainly.com/question/27945587

#SPJ4

The weight percentages of sodium chloride is 23.1 % and water is 76.9 % in the solution. The theoretical density of the initial concentrated solution is 0.30 g/mL.

The mass of the sodium chloride = 30 g

The mass of the water = 100 mL = 100 g

The total mass = 30 + 100

                         = 130 g

The mass percentage of sodium chloride = (30 / 130 ) × 100 %

                                                                        = 23.1 %

The weight percentage of the water = ( 100 / 130 ) × 100 %

                                                             = 76.9 %

The density of the solution = mass / volume

                                             = 30 / 100

                                            = 0.30 g/mL

To learn more about mass percentage here

https://brainly.com/question/16885872

#SPJ4

Increasing the volume of the system will have no effect on the mole fraction of Cl2 in the equilibrium mixture.

This is because the mole fraction is the ratio of moles of a specific component to the total moles of all components in the system. Increasing the volume will not change the number of moles of any specific component in the system, hence the mole fraction of Cl2 will remain constant.

The only factor that would affect the mole fraction of Cl2 is a change in the number of moles of Cl2 or any other component in the system. This can be achieved by adding or removing a specific component or by changing the temperature or pressure of the system. However, changing the volume alone will not affect the mole fraction of Cl2 or any other component in the system.

Learn more about equilibrium mixture

brainly.com/question/28061153

#SPJ4

Given the equation 4Al +3O2 --> 2Al2O3 if 325 grams of Al2O3 are to be formed, 101.77 grams is the mass of aluminum that must be reacted with excess oxygen. So, the correct option is 101. 77g Al

To find the amount of aluminum required to form 325 grams of Al2O3, we can use the balanced chemical equation: 4Al + 3O2 --> 2Al2O3. This equation tells us that for every two molecules of Al2O3 that are produced, four moles of aluminum and three moles of oxygen must react.

From the equation, we can see that the ratio of Al to Al2O3 is 2:4, so for every gram of Al2O3 produced, 2/6 grams of aluminum must be used. To produce 325 grams of Al2O3, we need 325 x 6/2 = 975 grams of aluminum.

Therefore, the mass of aluminum that must be reacted with excess oxygen is 975 grams, or approximately 975/28.35 = 34.59 moles, or approximately 101.77 grams.

Therefore, the answer is 101.77 grams of Al.

To know more about the determination of the mass of compound, visit:https://brainly.com/question/24353059

#SPJ4

Here are the four steps for problem-solving using unit conversions:

1.Identify the initial unit and the desired unit

2.Find the conversion factor

3.Set up the conversion

4.Check your work

Here are the four steps for problem-solving using unit conversions:

1.Identify the initial unit and the desired unit: Start by identifying the initial unit of measurement and the unit of measurement you want to convert to. This will help you to understand what type of conversion you need to make.

2.Find the conversion factor: Next, you need to find the conversion factor that relates the two units of measurement. This factor can be found in a conversion table or calculated using a mathematical formula.

3.Set up the conversion: Once you have the conversion factor, you can set up the conversion by multiplying the initial value by the conversion factor. This will give you the value in the desired unit of measurement.

4.Check your work: Finally, it's important to check your work to make sure that you have the correct units and that your answer makes sense. You should double-check your calculations and make sure that your answer is reasonable given the context of the problem.

To learn more about unit conversions:

https://brainly.com/question/19420601

#SPJ4

Sodium benzoate is the product from the reaction of benzoic acid with sodium hydroxide.

A chemical reaction is defined as a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products.

When NaOH is added to benzoic acid it neutralizes the benzoic acid producing the benzoate ion, which now goes into the aqueous layer, leaving other other two organic compounds in the ether. Similarly, it can be observed that nitroaniline that is not soluble in neutral or basic conditions, but is soluble in acidic type solutions.

The balanced chemical reaction is given as,

C₆H₅COOH(s) + NaOH(aq) → C₆H₅COO⁻Na⁺(aq) + H₂O(l)

Learn more about chemical reaction from the link given below.

https://brainly.com/question/29039149

#SPJ4

The one of the following that can be classified as a nonelectrolyte is HI. Nonelectrolytes are molecules that do not dissociate in water and do not conduct electricity, which means that they do not contain ions.

HI is a molecular compound composed of hydrogen and iodine, so it does not dissociate in water and does not conduct electricity, making it a nonelectrolyte. A nonelectrolyte is a substance that does not dissociate into its component ions when dissolved in a solvent such as water. This means that it does not conduct electricity and does not form a solution in which the ions can move freely. Nonelectrolytes are usually molecular substances, such as sugar, alcohol, and hydrocarbons, that contain only non-polar covalent bonds. When these substances are dissolved in water, they remain as intact molecules and do not break down into ions.

To know more about nonelectrolyte please refer:

https://brainly.com/question/29771118

#SPJ4

Answer:

Explanation:

The balanced equation for the reaction between nitric acid (HNO3) and Zinc Hydroxide (Zn(OH)2) is:

2 HNO3 + Zn(OH)2 -------------> Zn(NO3)2 + 2 H2O

This reaction produces Zinc Nitrate (Zn(NO3)2) and water (H2O) as products. The coefficients in front of each element ensure that there are the same number of atoms of each element on both sides of the equation.

Ozone is a secondary pollutant, a secondary pollutant is a type of air pollutant that is produced as a result of chemical reactions between primary pollutants in the atmosphere.

Unlike primary pollutants, which are directly emitted into the atmosphere, secondary pollutants are formed through a series of chemical reactions between primary pollutants and other atmospheric compounds. Ozone is a secondary pollutant that is formed when primary pollutants such as nitrogen oxides (NOx) and volatile organic compounds (VOCs) react with each other in the presence of sunlight. Ozone is considered to be a secondary pollutant because it is not directly emitted into the atmosphere but instead is formed through chemical reactions involving primary pollutants. It's important to note that although secondary pollutants are not directly emitted into the atmosphere, they can still have significant impacts on the environment and human health. Ozone, for example, is a major component of smog and can cause respiratory problems, as well as damage crops and other vegetation.

To know more about Ozone please refer: https://brainly.com/question/27581026

#SPJ4

x is 1. Sodium chloride (NaCl) is a binary ionic compound composed of sodium (Na) cations and chloride (Cl) anions.

The empirical formula for sodium chloride is NaCl, which means that each formula unit of sodium chloride contains one sodium cation (Na+) and one chloride anion (Cl-).

Since the compound was found to contain 29.0% of chlorine by mass, the molar mass of the compound can be determined as follows:

Mass of Cl = 29.0 g Cl / 100 g compound

Mass of Na = 71.0 g compound - 29.0 g Cl

Moles of Cl = Mass of Cl / Atomic mass of Cl

Moles of Na = Mass of Na / Atomic mass of Na

Since the ratio of sodium cations to chloride anions is 1:1, the number of moles of sodium cations is equal to the number of moles of chloride anions. The empirical formula for the compound is therefore NaCl, and the value of x is 1.

To learn more about Sodium chloride refer to this link

https://brainly.com/question/6649122

#SPJ4

A nucleic acid sequence that is palindromic, meaning it reads the same forward and backward, could form a perfectly base-paired, double-stranded molecule with itself.

Palindromic sequences are nucleic acid sequences that read the same forward and backward, and they can form perfectly base-paired, double-stranded molecules with themselves. In DNA, palindromic sequences are typically four or more nucleotides in length, and they can be recognized by their symmetry around a central axis. For example, the sequence 5'-CGCG-3' is a palindromic sequence that can base-pair with its complementary sequence 3'-GCGC-5' to form a double-stranded structure. Similarly, RNA sequences can also be palindromic and form double-stranded structures. RNA palindromic sequences tend to be longer and more complex than DNA palindromes, but they also base-pair with their complementary sequences to form double-stranded structures. Palindromic sequences can be found in various regions of the genome, including regulatory regions and coding sequences. They play important roles in DNA replication, gene expression, and recombination. Overall, palindromic sequences are an important feature of nucleic acid structure and function, and they provide insight into the complex molecular mechanisms that underlie many biological processes.

To know more about nucleic acids, visit:https://brainly.com/question/18943134

#SPJ4

The table that shows a proportional relationship is given as follows:

x:  4    7    8  10

y:  2  3.5  4   5

Proportional Relationship:

A proportional relationship is a relationship between two variables with equal proportions. Another way to think about them is that in a proportional relationship, one variable is always a constant value multiplied by another variable. This constant is known as the "proportional constant".

Direct Proportional Relationship:

This type describes a direct relationship between two quantities. Simply put, when one value increases, the other value also increases and vice versa.

For example, when a car speeds up, it travels a longer distance in a given amount of time. In notation, a direct proportion is denoted by y ∝ x.

Inverse Proportional:

This type describes an indirect relationship between two quantities.

Simply put, when one value increases, the other value decreases and vice versa y ∝ 1/x. For example, by increasing the speed of a car, it can travel a fixed distance in less time.

Based on the Question:

For proportional ratios, the ratio between the output and input variables must be constant for all values ​​in the table, so the correct option is given in the third table as

2/4 = 0.5.

3.5/7 = 0.5.

4/8 = 0.5.

5/10 = 0.5.

and the ratio equation: y = 0 and 5 times.

Learn more about Proportional Relationship:

https://brainly.com/question/29765554

#SPJ4

F2 has a higher heat capacity due to its more intricate electrical structure and increased number of vibrational modes.

The amount of heat needed to raise the temperature of one mole of a substance by one degree Celsius at constant volume is known as the molar constant volume heat capacity (Cv). The atomic and molecular characteristics of the substance, such as its mass, structure, and vibrational modes, determine the value of Cv.

The energy needed to dissociate a bond between two atoms in a molecule is known as the bond dissociation energy (BDE). The link between two fluorine atoms can be broken with less energy because F2 has a lower bond dissociation energy than O2 and N2.

To know more about molar constant volume refer to:

brainly.com/question/4270867

#SPJ4

Serotonin and norepinephrine are both neurotransmitters, which are small molecules that are released from neurons and act on other neurons in the brain.

Serotonin is primarily responsible for regulating mood, sleep, appetite, and other cognitive functions, while norepinephrine is responsible for regulating alertness and arousal, as well as the body's fight-or-flight response. Serotonin is thought to be involved in processes such as learning, memory, and decision making, while norepinephrine is involved in regulating the autonomic nervous system and certain hormones.Noradrenaline, also called norepinephrine, is a neurotransmitter and a hormone. Your body's "fight-or-flight" response depends on it. Norepinephrine is a medication that is used in specific, urgent, short-term medical settings to raise and maintain blood pressure.

learn more about Serotonin Refer:brainly.com/question/9595557

#SPJ4

The concentration of H₂(g) in the solution is 8.92 ppm.

PPM stands for "parts per million," and it is a unit of measurement used to express the concentration of a substance in a solution. Specifically, PPM represents the number of parts of a substance per one million parts of the solution. It's worth noting that the concentration of 1 ppm is often used as a benchmark for very small concentrations in water, and is equivalent to 1 mg/L (milligram per liter). In this case, the concentration of 8.92 ppm is considered to be a very low concentration of H₂(g) in water, which is why 1 ppm might be seen as an appropriate answer for practical purposes.

The concentration of H₂(g) in the solution can be calculated as follows:

Calculate the number of moles of H₂(g) in the solution:

n(H₂) = m(H₂) / M(H₂)

where m(H₂) is the mass of H₂(g) and M(H₂) is the molar mass of H₂.

m(H₂) = 0.0001 g

M(H₂) = 2.016 g/mol

n(H₂) = 0.0001 g / 2.016 g/mol = 4.96 x 10⁻⁵ mol

Calculate the total number of moles of solution:

n(total) = m(H₂O) / M(H₂O)

where m(H2O) is the mass of water and M(H₂O) is the molar mass of water.

m(H₂O) = 100. g

M(H₂O) = 18.015 g/mol

n(total) = 100. g / 18.015 g/mol = 5.548 mol

Calculate the concentration of H2(g) in parts per million (ppm):

ppm = (n(H₂) / n(total)) x 10⁶

ppm = (4.96 x 10⁻⁵ mol / 5.548 mol) x 10⁶= 8.92 ppm

Therefore, the concentration of H2(g) in the solution is 8.92 ppm.

To know more about concentration, visit:

https://brainly.com/question/13872928

#SPJ1

The pKb for the hypochlorite ion is 6.48. Rounded to three significant figures, the answer is 6.49.

The pKb for the hypochlorite ion (OCl-) can be calculated using the relationship between the Ka and the Kb of the acid and its conjugate base.

Kw = Ka * Kb

where Kw is the ion product constant of water (1.0 x [tex]10^{-14}[/tex] at 25°C).

At 25°C, the pKa for HOCl can be calculated as:

pKa = -log(Ka) = -log(3.0 x [tex]10^{-8}[/tex]) = 7.52

The pKb for OCl- can be calculated using the following formula:

pKb = pKw - pKa = 14.00 - 7.52 = 6.48

Therefore, the pKb for hypochlorite ion is 6.48. Rounded to three significant figures, the answer is 6.49.

For similar questions on pKb for hypochlorous,

https://brainly.com/question/16748652

#SPJ4

As the molarity of a solution increases, the absorbance readings of the solution typically increase.

This is because an increase in molarity generally corresponds to an increase in the concentration of the absorbing species in the solution, which in turn leads to an increase in the number of absorbing particles that can interact with the incident light.

The relationship between absorbance and concentration of a solution is described by the Beer-Lambert law, which states that the absorbance of a solution is proportional to the concentration of the absorbing species and the path length of the light through the solution. Thus, an increase in the concentration of the absorbing species (i.e. the molarity of the solution) leads to an increase in the number of particles that can interact with the light, resulting in a higher absorbance reading.

It's worth noting that this relationship between molarity and absorbance is not always linear, and may depend on the specific properties of the absorbing species and the solvent in which it is dissolved. Additionally, if the concentration of the absorbing species becomes too high, the solution may become opaque and the absorbance readings may no longer be meaningful.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

the cell can increase the amount of calcium ions inside the cell by active transport, facilitated diffusion, and endocytosis.

The movement of calcium ions across the cell membrane is crucial for several physiological processes, including muscle contraction, neurotransmitter release, and gene expression. When the concentration of calcium ions is low inside the cell compared to the surrounding fluid, the cell can increase the amount of calcium ions inside by several processes. One of the ways the cell can increase the amount of calcium inside cell is by active transport. Active transport involves the use of energy in the form of ATP to move ions against their concentration gradient. In this case, the cell would use ATP to move calcium ions from the area of lower concentration inside the cell to the area of higher concentration in the surrounding fluid. This process is carried out by membrane-bound protein pumps, such as the calcium ATPase and the sodium-calcium exchanger. Another way for the cell to increase the amount of calcium ions inside the cell is by facilitated diffusion. Facilitated diffusion is the process by which ions or molecules move across a membrane through a protein channel. Calcium ions can move inside the cell through specific protein channels such as voltage-gated calcium channels and ligand-gated calcium channels. These channels allow calcium ions to move down their concentration gradient, from an area of higher concentration in the surrounding fluid to an area of lower concentration inside the cell. Moreover, the cell can increase the amount of calcium inside the cell by endocytosis. In this process, the cell engulfs extracellular fluid containing calcium ions by forming a vesicle around it, which is then transported into the cytoplasm. Endocytosis can occur through various mechanisms, such as phagocytosis and pinocytosis, depending on the size and nature of the substance being engulfed. In conclusion, the cell can increase the amount of calcium ions inside the cell by active transport, facilitated diffusion, and endocytosis. Each process is important in maintaining the proper concentration of calcium ions within the cell and is regulated by various cellular mechanisms.

To know more about calcium ions  click here:

brainly.com/question/28423173

#SPJ4

False. Students typically determine the freezing point by finding the intersection of the two lines on the graph, not by determining the best fit lines from the two regions.

The temperature at which a material transitions from a liquid to a solid form is known as its freezing point.At this temperature, the molecules of the substance slow down enough to form a crystalline structure. Different substances have different freezing points, depending on the type of molecules and the strength of the intermolecular forces. Generally, the freezing point of a substance decreases with an increase in pressure.This transition occurs because the molecules are no longer able to move freely, as the intermolecular forces holding them together are stronger than the thermal energy of the system.

learn more about freezing point Refer:brainly.com/question/1550397

#SPJ4

Amount of fluorine which will be release into the air over 6 months is 0.372Kg if an ice-freezer releases an amount of 32.77g freon.

Fluorine is a compound component with the image F and nuclear number 9. It is the lightest halogen and exists at standard circumstances as a profoundly harmful, light yellow diatomic gas. As the most electronegative responsive component, it is very receptive, as it responds with any remaining components with the exception of the light dormant gases.

Among the components, fluorine positions 24th in widespread overflow and thirteenth in earthbound overflow. Fluorite, the essential mineral wellspring of fluorine which gave the component its name, was first portrayed in 1529; as it was added to metal minerals to bring down their softening focuses for purifying, the Latin action word fluo signifying 'stream' gave the mineral its name. Proposed as a component in 1810, fluorine demonstrated troublesome and perilous to isolate from its mixtures, and a few early experimenters kicked the bucket or supported wounds from their endeavors.

First,we need to find number of total weeks in 6 months is =6×4 =24weeks

Amount of mass leak of freon compound(C₂H₂F₃Cl)=32.77g

Now,mass of fluorine will  be released=(Fluorine mass in freon/Moloecular mass of freon)×Leak rate

=>Mass of fluorine will be released= [(19×3) / 118.5]×32.23

=>Mass of fluorine will be released=1837.11/118.5

=>Mass of fluorine will be released=15.50g/week.

Therefore,total mass released in 6 months=15.50g/week × 24=372.072g

Hence, amount of fluorine which will be released is 0.372Kg.

To know more about fluorine, visit here:

https://brainly.com/question/27952083

#SPJ4