Do you expect Sc2O3 to react when the solution becomes acidic or when it becomes basic? write balanced chemical equation

The correct response is a) Ag. The oxidation number of an atom of a pure element is 0. The charge an atom would have if the compound were made up of ions is known as its oxidation number.

The oxidation state, often known as the oxidation number, in chemistry refers to the hypothetical charge that an atom would have if all of its links to other atoms were entirely ionic. It describes how much an atom has oxidized (lost electrons) in a chemical complex. The oxidation state can theoretically be positive, negative, or zero. Although nature does not include entirely ionic bonds, it does contain numerous strong ionic bonds, making the oxidation state a reasonable predictor of charge. The formal charge or any other genuine atomic attribute of an atom is not represented by the oxidation state of that atom. This is especially true for high oxidation states, where the amount of ionization energy needed to create a multiply positive ion is much more than the amount of energy available in chemical reactions. A compound's atoms' oxidation states can also change based on the electronegativity scale that was used to calculate them. An atom's oxidation state in a compound is thus just a formalization. Nevertheless, it is crucial to comprehend inorganic compound nomenclature rules. Additionally, a number of chemical reaction findings can be fundamentally described in terms of oxidation states.

Learn more about oxidation number here

https://brainly.com/question/27239694

#SPJ4

Assign oxidation states to each atom in each element, ion, or compound. a. Ag, b. Ag^+Ag+  c. CaF_2CaF 2  d. H_2SH2S e. CO_3 {2-}CO32−  f. \mathrm{CrO}_{4}^{2-}CrO42−

The molar mass of the unknown compound that vaporizes at 150 °C is  34.81 g/mol

The molar mass of a chemical compound is defined as the mass of a sample of that compound divided by the number of moles in that sample. Its unit of measurement is grams per mole (g/mol) although in the International System of Measurements it should be kilograms per mole (kg/mol).

This is a property closely related to the relative molar mass of a compound and to the standard atomic masses of the constituent elements.

To determine the molar mass of the gas, the ideal gas equation was used: PV = nrt, in which

P = Pressure

V = Volume

n = number of moles

R = Gas constant

t = temperature

But previously the moles of the gas are calculated

Data

t = 150°C = 423.15K

V = 960ml = 0.96L

P = 1.00 atm

R = 0.082 L Atm / mol °K .

n = ?

PV = nrt

n = PV/rt

n=1. 0.96 / 0.082. 423.15

n = 0.96 / 34.7

n = 0.027 mole

M = m/n

M = 0.94 g/ 0.027 mol

M = 34.81 g/mol

Learn more about molar mass at https://brainly.com/question/13152455

#SPJ4

Solubility of gas

The solubility of a substance is the amount of that substance that is required to form a saturated solution in a given amount of solvent at a specified temperature. Solubility is often measured in grams of solute per 100g of solvent. The solubility of sodium chloride in water is 36.0g per 100g of water at 20oC. The temperature must be specified because solubility varies with temperature.The solubility of a solid or a liquid solute in a solvent is affected by the temperature, while the solubility of a gaseous solute is affected by both the temperature and the pressure of the gas. We will examine the effects of temperature and pressure separately.

find more about Solubility:-

brainly.com/question/23946616

#SPJ4

After the initiation of mechanical ventilation, we observe Increased pH.

Mechanical ventilation is a type of life support that involves the use of positive pressure to help a patient breathe. Respiratory therapists work closely with doctors to provide care for patients who are intubated and connected to a ventilator. The most important aspect of this process is monitoring the patient-ventilator interaction to ensure that they are receiving the right amount of support. Vital signs are a key part of any patient assessment. In mechanically ventilated patients, it is important to monitor the following:

Heart rate

Respiratory rate

Oxygen saturation

Blood pressure

Temperature

These vital signs are important to monitor because they can let practitioners know if the patient is in distress or if there was a change in their condition.

find more about mechanical ventilation:-

brainly.com/question/17234224

#SPJ4

The compound that would have the most exothermic lattice energy is NaF. Option  A.

Lattice energy is exothermic. Lattice energy is the energy released when gaseous cations and anions associate with each other to form a solid crystalline ionic solid. When paraffin burns in a flame, it reacts with oxygen to produce carbon dioxide and water.

This reaction is indeed exothermic as it releases heat into the atmosphere with the help of other products. The amount of heat released depends on the chemical reaction between hydrocarbons and oxygen. A reaction is exothermic if the sum of the enthalpies of the reactants is greater than the enthalpy of the products. If the enthalpy on the product side is large, the reaction is endothermic.

Learn more about Lattice energy here:-https://brainly.com/question/13169815

#SPJ4

To explain the behavior of chemicals, new findings and ideas are always being created. They are Nihonium, Moscovium, and Tennessine, respectively. Researchers find new elements.

An important part of the entire. In chemistry, the term refers to a straightforward chemical that cannot be broken down into smaller parts or changed into another substance. The fundamental units of an element are its atoms, which are composed of protons, neutrons, and electrons. Each atom of a given element contains a set number of protons.

If a substance has exactly the same number of protons in each of its atoms, or, to put it another way, if all of its atoms, then that substance is said to be an element.

To know more about Element visit:

https://brainly.com/question/13025901

#SPJ4

Standard enthalpy of formation for diamonds is 1.9kJ/mol .

Enthalpy of formation of any compound is defined as the amount of energy required to form 1 mole of compound.Enthalpy of formation is usually represented as ΔHf. If the enthalpy of combustion of two reactions is given, then enthalpy of combustion of the overall reaction can be calculated with the help of Hess's Law.

Given Reactions are:-

C(graphite) + O2(g) → CO2(g)  AH°₁= --393.5 kJ/mol C

C(diamond) + O2(g) → CO2(g)

On reversing the second equation:

CO2(g) →  C(diamond) + O2(g) => AH° =-395.4 kJ/mol

C(graphite) →  C(diamond)

AH°(overall) = AH°₁ + AH° =  --393.5 kJ/mol C +-395.4 kJ/mol =               1.9kJ/mol

To know more about Hess's Law:

brainly.com/question/3393755

#SPJ4

When fluorine gas is put into contact with calcium metal at high temperatures, calcium fluoride (CaF2) is formed.

The chemical equation for the reaction between calcium and fluorine is:

Ca + F2 -> CaF2

The formula for fluorine gas is F2.

To balance the equation for the reaction between calcium and fluorine to form calcium fluoride, you need to ensure that there are the same number of atoms of each element on both sides of the arrow. The balanced equation is:

Ca + F2 -> CaF2

There is 1 atom of calcium on the left side and 1 atom of calcium on the right side, so the equation is already balanced with respect to calcium. There are 2 atoms of fluorine on the left side and 2 atoms of fluorine on the right side, so the equation is also balanced with respect to fluorine.

Therefore, the balanced equation for the reaction between calcium and fluorine to form calcium fluoride is:

Ca + F2 -> CaF2

A chemical equation is a written representation of a chemical reaction that shows the reactants, products, and their coefficients. The reactants are the substances that are present at the beginning of the reaction, and the products are the substances that are produced as a result of the reaction. The coefficients are the numbers that are placed in front of the reactants and products to indicate the relative amounts of each substance involved in the reaction.

Learn more about chemical equation, here https://brainly.com/question/28294176

#SPJ4

Metal – bright, malleable, ductile, or a good conductor of electricity and heat.

Metals may be hammered into sheets and are malleable, ductile, and good conductors for heat and electricity.

When struck with a hammer, malleable metals will twist and bend into a variety of shapes, but non-malleable metals may shatter into fragments.Metals like gold, iron, aluminium, copper, silver, and lead are examples of malleable metals.

To know more about electricity conducts visit:

https://brainly.com/question/5759256

#SPJ4

A hydrogen bond is weak force between atoms in a molecule, but is of enormous importance in physiology.

What is Hydrogen Bonding?

Dipole-dipole interactions between molecules that do not include a covalent bond to a hydrogen atom are known as hydrogen bonds. The attraction between two incredibly electronegative atoms, such N, O, or F, and a hydrogen atom that is covalently bonded to one of them causes it to occur.

Any electronegative atom, such as oxygen, chlorine, or fluorine, may make up the other atom, whereas one of the atoms is hydrogen. Between molecules or between two different molecules, hydrogen bonds can develop between the atoms.

To know more about Hydrogen Bond, visit:

https://brainly.com/question/21054466

#SPJ4

The mass of CuSO₄ that will be obtained by starting with 10 g of CuO is CuSO₄

We'll begin by writing the balanced equation for the reaction. This is shown below:

2CuO + 2SO₂ + O₂ -> 2CuSO₄

From the balanced equation above,

159 g of CuO reacted to produce 319 g CuSO₄

Finally, we shall determine the mass of CuSO₄ obtained from the reaction by reacting 10 g of CuO. Details below:

From the balanced equation above,

159 g of CuO reacted to produce 319 g CuSO₄

Therefore,

10 g of CuO will react to produce = (10 × 319) / 159 = 20 g of CuSO₄

Thus, the mass of CuSO₄ obtained is 20 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The net ionic equation for the reaction that occurs when solutions of lead(II) nitrate[Pb(NO3)2 ] and potassium iodide(2KI) are combined is:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

The balanced Molecular equation for the reaction of lead nitrate [Pb(NO3)2 ]and Potassium iodide(2KI) is given as ;

Pb(NO3)2 (l) + 2KI (s) → PbI2 (s) + 2KNO3 (l).

Solutions of lead(II) nitrate and potassium iodide were combined and formed double displacement reaction. The complete ionic equation is:

Pb²⁺(aq) + 2 NO₃⁻(aq) + 2 K⁺(aq) + 2 I⁻(aq) ⇒ 2 K⁺(aq) + 2 NO₃⁻(aq) + PbI₂(s)

Removing Spectator ions, that appear both in the reactants and in the products. They do not participate in the reaction thats why they do not appear in the net ionic equation.So, The net ionic equation is:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

The net ionic equation for the reaction of lead(II) nitrate[Pb(NO3)2 ] and potassium iodide(2KI) solution is combined:

Pb²⁺(aq) + 2 I⁻(aq) ⇒ PbI₂(s)

To learn more about ionic Equation visit here : https://brainly.com/question/15466794?referrer=searchResults

#SPJ4

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the correct option is option D.

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.

The balanced equation for V[tex]_2[/tex]O[tex]_5[/tex] + CaS → CaO + V[tex]_2[/tex]S[tex]_5[/tex] is

V[tex]_2[/tex]O[tex]_5[/tex] + 5CaS → 5CaO + V[tex]_2[/tex]S[tex]_5[/tex]

Therefore, the correct option is option D.

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ1

The amino acid that would contribute most significantly to the stability of the tertiary structure of a protein is : cysteine.

Cysteine is a semi essential proteinogenic amino acid that has the formula HOOC−CH−CH₂−SH. The thiol side chain in cysteine participates in enzymatic reactions as a nucleophile.

The formation of disulfide bridges by oxidation of the sulfhydryl groups on cysteine is a very important aspect of the stabilization of protein tertiary structure. This allows different parts of the protein chain to be held together covalently.

Very high doses of cysteine may be toxic to human cells and may lead to death.

To know more about cysteine, refer

https://brainly.com/question/28287226

#SPJ4

In an exothermic reaction, more energy is released than is used to break the bond of the reactants forming a bond in the product.

An exothermic reaction involves an increase in the temperature of the reaction mixture. A chemical reaction that absorbs total energy is called an endotherm. A reaction inhibitor is a substance that slows down or prevents a chemical reaction.

Exothermic processes release heat and raise the temperature of adjacent areas. Endothermic processes absorb heat and cool the surroundings. Substances that slow or stop a chemical reaction are called inhibitors. Endothermic reactions are chemical reactions in which reactants absorb thermal energy from the environment to form products.

Learn more about An exothermic reaction here:- https://brainly.com/question/24808802

#SPJ4

the complete nuclide symbols for the particles that are required to balance the following nuclear reactions is : 54Cr24

Let the reactant be X, Balance mass number on both sides, mass of Bi + mass of X = mass of n + mass of Bh 1*209 +  M  = 1*1 + 1*262, M = 54. Balance atomic number on both sides atomic of Bi + atomic of X = atomic of n + atomic of Bh,1*83 +  A  = 1*0 + 1*107, A = 24. Atomic number 24 is for element Cr. So, the reactant is 54-C. Answer: 54Cr24. Nuclides are frequently authored as AZX, in Which an is the total amount of protons and neutrons, Z reflects the amount of protons, and the distinction between B and Z represents the number of neutrons. Thus, 3717Cl signifies chlorine-37. A balanced equation is a chemical equation wherein mass is preserved so each element has an equivalent atomic mass on both sides of the issue.

Learn more about Nuclides here:

https://brainly.com/question/17216436

#SPJ4

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, 1.07×10⁻¹²g/L is the density of the heated air in the balloon.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically, the formula relating mass and volume can be given as

Density of substance= Mass of the substance ÷volume marked on the graduated cylinder

density=mass ÷ Volume

1.20 g/L= mass   ÷ 1.02×10⁶

mass = 1.17×10⁻⁶ g

density= 1.17×10⁻⁶ g÷ 1.09×10⁶L

density= 1.07×10⁻¹²g/L

Therefore, 1.07×10⁻¹²g/L  is the density of the heated air in the balloon.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ1

The metal vessel The room The experiment O The gas, The gas which evolve in the reaction is oxygen. A chemical process in which substances interact and transform into another substance.

What is reaction?

A chemical process in which substances interact and transform into another substance, or one substance transforms into another, is called a reaction.

Therefore, The metal vessel The room The experiment O The gas, The gas which evolve in the reaction is oxygen. A chemical process in which substances interact and transform into another substance, or one substance transforms into another, is called a reaction.

To learn more about reaction refer the given link:-

https://brainly.com/question/13929053

#SPJ4

Proper waste disposal including dialysis, putting apparatus at their appropriate places, Rinsing of glassware's and disposal in trash container must be done.

Organic and inorganic wastes are separated out of laboratory liquid wastes. In accordance with textbooks and instructors, place liquid wastes into the designated liquid waste container. Pour the liquid waste container with the glassware after giving it a quick rinse in the least amount of water.

To know more about lab waste disposal ,please refer:

https://brainly.com/question/11174175

#SPJ4

1. CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g), the number of moles of products remains the same.

2. 2CO(g) ⇌ C(s) + CO₂(g), the number of moles of products increase.

3. N₂O₄(g) ⇌ 2NO₂(g), the number of moles of products decrease.

Any change in the equilibrium can be studied on the basis of Le-Chatelier's principle. This principle can describe that for any change in the variables of the reaction, the equilibrium shift in the direction to minimize the effect of that change.

CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g)

On increasing the pressure, the equilibrium shift in direction where decrease in pressure is occurring, the reaction will shift in no direction because the number of gaseous moles is the same on both sides. Therefore, no increase in the number of moles of products.

2CO(g) ⇌ C(s) + CO₂(g)

On increasing the pressure, the reaction will shift in a forward direction because the number of gaseous moles is less on the product sides. Therefore, increase in the number of moles of products.

N₂O₄(g) ⇌ 2NO₂(g)

On increasing the pressure, the reaction will shift in a backward direction because the number of gaseous moles is less on reactant side both sides. Therefore, decrease in the number of moles of products.

Learn more about equilibrium, here:

brainly.com/question/15118952

#SPJ1

The term used to describe the molecules that are being studied in a thermodynamic reaction is system.

Thermodynamics refers to the study of the relations between heat, work, temperature, and energy. The laws of thermodynamics define the way energy in a system change and whether the system can perform useful work on its surroundings. Thermodynamic reaction or control is a reaction in which the product ratio is determined by the relative stability of the products. Thermodynamic stability occurs when a system is in its lowest energy state, or in chemical equilibrium with its environment. Hence, thermodynamic studies study molecules within a system.

Learn more about Thermodynamics:

https://brainly.com/question/18056998

#SPJ4

The revenues of the note will equal the $225,000 face value, provided the note has an interest rate of 8%.

On Friday, December 9, 2022, the benchmark 30-year fixed mortgage's average rate is 7.32%, which is a 15 basis point increase from the previous week. If you want to restructure your present mortgage.

The nominal value and face value are both used interchangeably. That which a money is worth. Simply said, it is a security's nominal value. A 45-day note having a face value of $225,000 was issued by Nyree Co. to Conrad Bank based on the information provided. Consequently, the amount of the note's revenues will match its face value, which is 225,000.

To know more about interest rate visit:-

https://brainly.com/question/13324776

#SPJ4

The weight of the container after the wax hardens is 0.18 N.

We know that according to the law of the conservation of mass, the mass of an object can neither be created nor destroyed but it can be changed from one form to the other.

Looking at this law, we know that the mass would not change even after the time that the wax must have hardened. The total mass of the wax would have to be a constant.

Total mass would now be;

Mass of the wax + mass of the container

= 3 g + 15 g

= 18 g

Weight = 18/1000 * 9.8 m/s^2

= 0.18 N

Learn more about mass:https://brainly.com/question/13383562

#SPJ1

According to the molar concentration, the molarity of an aqueous solution  is 0.146 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Substituting values in above formula, molarity=3.65×10[tex]^-2[/tex]/0.250=0.146 M.

Thus, the molarity of an aqueous solution is 0.146 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ1

the bonds that link the base pairs in the dna double helix are  peptide bonds hydrophobic interactions ionic  bonds ester bonds hydrogen bonds

A hydrogen bond is an electrostatic attraction force between such a hydrogen ion that's also tightly bonded to a more electron - deficient "donor" atom or group and then another electronegative atom with a single pair of electrons—the hydrogen bond electron donor. Hydrogen bonding isn't a sharing of electrons to a hydrogen atom, instead it is a type of dipole-dipole attraction between particles. The force of attraction between a hydrogen atom covalently bonded to a very electronegative including an N, O, or F atom and a very electronegative atom causes it. Because hydrogen has been attached to the a comparatively electronegative, and this electronegative atom is a hydrocarbons donation, the hydrogen bond is the strongest type of link between molecules. As a result, the resulting charge is more powerful.

To learn more about hydrogen bonds here:

https://brainly.com/question/21054466

#SPJ4

Example:

Single displacement- Zn + CuSO4 → ZnSO4 + Cu

This reaction is commonly used in the purification of copper, as the zinc ions in the reaction are less reactive than copper and will not dissolve in the sulfuric acid solution. The resulting copper can be easily separated from the zinc sulfate solution by electrolysis.

Single displacement- Al + CuCl2 → AlCl3 + Cu

This reaction is used in the production of aluminum chloride, which is a common starting material for the synthesis of a variety of compounds used in pharmaceuticals, fragrances, and other industrial applications. The aluminum chloride produced in this reaction can also be used as a catalyst in the production of polymers and in the refining of petroleum products.

Here is the complete explanation about labeling guidelines.

Signal words are found on the  pesticide product labels.

Of to the end, and they describe the acute to  (short-term) toxicity of to by  formulated pesticide of the  product.

The signal word can become either: DANGER and be the  WARNING . Products with to the DANGER signal word are the   most toxic. Products of  with the signal word in the  WARNING are lower in the  toxicity.

So the correct is danger of  because it's indicated by  flammable and high toxic.

To know more about labeling guidelines click-

https://brainly.com/question/25482413

#SPJ1

The correctly balanced equation for the reaction of rust is 4Fe + 3O₂ + 2xH₂O → 2Fe₂O₃. x H₂O.

The correct equation for the reaction of hydrochloric acid and iron is 2HCl + Fe → FeCl₂ + H₂.

The correctly balanced equation for the reaction of KOH and H₂SO₄ is KOH + H₂SO₄ → K₂SO₄ + H₂O.

A chemical reaction is a process to rearranges the constituent atoms of the reactants to create different substances as products. Rusting is a chemical reaction between iron, water, and air (oxygen gas).

A chemical reaction between acid and metal is salt and hydrogen gas.

A chemical reaction between acid and base is salt and water.

Learn more about balanced chemical reaction here: https://brainly.com/question/26694427

#SPJ4

When c in the BET equation is greater than 1, a type II isotherm is produced. When employing the BET approach, this is the most typical isotherm that is obtained.

isotherm, a line connecting places on a map or chart that have the same temperature. Isotherms are frequently used in meteorology to display the temperature distribution at the Earth's surface or to represent constant levels or constant pressure on a chart. The properties of heat flow into soil, for instance, are easily visualized from a graph showing temperature as a function of depth and time. They are also used to depict the time fluctuation of temperature with height in the atmosphere or with depth in soil or water. Plotting the temperature for each place as a function of day and season (vertical axis) makes it easy to compare thermal conditions (horizontal axis).

Learn more about isotherm here:

https://brainly.com/question/5982851

#SPJ4

The latent heat of vaporization of water in kJ/g is 2.197 kJ/g.

The latent heat of vaporization of water is calculated from the given data as follows:

The heat required to change water at 88.3 °C to water at 100 °C = 74 * 4.18 * (100 - 74)

The heat required to change water at 88.3 °C to water at 100 °C = 8042.32 J or 8.042 kJ

The heat required to change water vapor at 100 °C to water vapor at 112.5 °C = 74 * 2.10 * (112.5 - 100)

The heat required to change water vapor at 100 °C to water vapor at 112.5 °C = 1942.50 J or 1.943 kJ

The heat required to change water at 100 °C to water vapor at 100°C = 172.58 - (8.042 + 1.943)

The heat required to change water at 100 °C to water vapor at 100°C = 162.595 kJ

The heat of vaporization of water in kJ/g = Heat change / mass

The heat of vaporization of water in kJ/g = 162.595 / 74

The heat of vaporization of water in kJ/g = 2.197 kJ/g

Learn more about the heat of vaporization at: https://brainly.com/question/22244892

#SPJ1