DO YOU TRUST YOUR DATA?
1. Why do you believe data can be inaccurate?
2. What can a business do to ensure data is correct? What can be done to reduce these errors?
3. Explain how bad data will impact information, business intelligence, and knowledge.
4. Have you ever made a decision on bad data? If so, be sure to share it with your peers and explain how you could have verified the data quality.
5. Argue for or against the following statement: "It is better to make a business decision with bad data than with no data"

The correct matching of criticial success factor, kepy performance indicator, and return on investment is given below:

You can learn more about critical success factors at

https://brainly.com/question/17922438

#SPJ4

If you make changes to the Wage Survey data set, the changes will occur in the underlying data table. Thus, option C is the correct option.

When changes are made to the Wage Survey data set, they directly impact the underlying data table. The Wage Survey data set is essentially a representation or subset of the original data stored in the underlying data table. Any modifications, additions, or deletions made in the data set will reflect in the original data table.

This close relationship ensures that all derived data sets, such as Wage Survey Reference and Wage Survey Duplicate, stay synchronized with the latest changes in the underlying data. Thus, maintaining data integrity and consistency throughout the entire dataset and its subsets.

Thus, option C is the correct option.

Learn more about wage survey here:

https://brainly.com/question/30010929

#SPJ12

Answer:

Explanation:

Q1: Polling is a method of computer programming where a program repeatedly checks a specific location in memory for new data or an event to occur. This is often done in a loop, where the program continuously checks for new data or an event until it occurs.

Two disadvantages of polling are:

It can be inefficient, as the program must continuously check for new data or an event, which can consume a lot of processing power.

It can also lead to missed events or data, as the program may not be checking at the exact moment when the event or data occurs.

Q2: Memory interleaving is a technique used to improve the performance of computer memory systems by spreading data across multiple memory modules. This is done by interleaving the memory addresses so that data is spread evenly across all the modules, rather than being stored in one module.

This technique is used for performance enhancements because it allows for faster access to data by allowing multiple memory modules to be accessed at the same time, rather than having to access data from one module at a time. This results in faster data transfer rates and improved system performance. Additionally, memory interleaving can also improve the reliability of a system by spreading data across multiple memory modules, which reduces the risk of data loss in the event of a module failure.

By introducing a unique data type called symbolic objects, Symbolic Math ToolboxTM enables you to carry out symbolic computations from the MATLAB® command line.

Functions can be used for integration, differentiation, simplification, equation solving, and other mathematical operations. They are invoked using the typical MATLAB syntax. Computer algebra, also known as symbolic computation or algebraic computing, is a branch of mathematics and computer science that studies and creates software and algorithms for manipulating mathematical expressions and other mathematical objects. Python is challenging to use, while MATLAB has very powerful mathematical calculating capabilities. Matrix support is not available in Python, although NumPy can be used. Python is weak at image processing and signal processing, whereas MATLAB excels, and performance is also significantly poorer.

Learn more about MATLAB

https://brainly.com/question/12950689

#SPJ4

Answer:

D. Electromagnetic Interference

Explanation:

Electromagnetic interference, also known as radio-frequency interference is when electrical cables put out electromagnetic fields. Temperature, airflow, and humidity are all important parts of environmental control, but they do not affect data cabling, whereas electromagnetic interference can.

In order to prevent against environmental concerns related to     electromagnetic interference, it is crucial to follow the safety procedures while running electrical cables close to data cables. The choice is b).

The associated with the motion energy of particles in an item is measured by its temperature. The velocity of these particles likewise increases as the temperature rises. Using a thermostat or a calorimeter, one may determine the temperature.

Data cabling and other uninsulated equipment can have problems due to electromagnetic interference, which occurs when electronic items or cabling emit electromagnetic pulses.

Although crucial components of environmental management, ventilation, humidity, and temperature do not affect data cabling.

To know more about Temperature visit :

https://brainly.com/question/16494521

#SPJ4

According to the query we've been given, The result for arr[4] will  be 2 following the provided code.

Coding is a software program that aids in computer communication. Computers are unable to comprehend human languages. Humans can connect with computers thanks to coding. Code gives instructions to the computer on what actions to take and what tasks to complete.

Copy is a recommendation to the same collection as arr when u write copy = arr. Copies is not an new array. So, when copy[4] is set to 2, arr[4] likewise changes to 2 when copy[4] is set to 2.

To know more about Code visit :

https://brainly.com/question/26675342

#SPJ4

The speed at which a concrete mixer drum can rotate without the ingredients sticking to the sides of the drum is determined by several factors, including the viscosity and cohesion of the mixture, the size and shape of the drum, and the intensity of the tumbling action.

In general, the faster the drum rotates, the more intense the tumbling action becomes, increasing the risk of ingredients sticking to the sides of the drum.To determine the maximum safe rotation speed, it is necessary to balance the need for a fast mixing process with the risk of ingredients sticking to the drum. Factors such as the size and shape of the drum, the viscosity and cohesion of the mixture, and the intensity of the tumbling action must all be considered in order to determine the maximum safe speed. The drum may also have to be modified to prevent sticking, such as by adding baffles or other features to the interior surface.

In general, concrete mixer drum speeds range from 30 to 60 RPM, with the fastest speeds typically used for high-intensity mixing processes. The specific speed will depend on the characteristics of the mixture and the mixer itself, and may need to be determined experimentally for each application.

Find more about concrete mixer cement

brainly.com/question/4576423

#SPJ4

The prefix "nano" (n) represents 10^-9, so the answer can be expressed as 7.29 n m²/kg³. This is the answer rounded to three significant figures and expressed in SI units using an appropriate prefix.

The expression 35 mm²/48 kg³ is a ratio of area and volume and needs to be converted to SI units for proper evaluation. To convert the expression to SI units, the area should be converted from mm² to m² and the volume should be converted from kg³ to m³.

After the conversion, the expression can be rounded to three significant figures.In SI units, 35 mm² is equivalent to 3.5 x 10^-5 m² and 48 kg³ is equivalent to 4.8 x 10^-9 m³. Therefore, 35 mm²/48 kg³ can be expressed as 3.5 x 10^-5 m²/4.8 x 10^-9 m³, which is equal to 7.29 x 10^-10 m²/kg³.

Find out more about Prefix

brainly.com/question/29448514

#SPJ4

The process of evaluating data and drawing pertinent conclusions from it using different analytical techniques is known as data interpretation.

Researchers can categorize, manipulate, and summarize data with the help of data analysis to find answers to important issues. In terms of business, the interpretation of data is the carrying out of several processes. For the purpose of gaining knowledge and identifying new patterns and behaviors, this procedure examines and revises data. These findings will help you, as a manager, make a calculated decision with all the information at your disposal. If raw data is not interpreted, it is useless. Data interpretation is crucial for both individuals and corporations. The information gathered aids in making wise decisions.

Learn more about data here-

https://brainly.com/question/17355880

#SPJ4

Answer:

Impedance is the total opposition of AC

Explanation:

Impedance consists of Resistance and Reactance. Thus, total opposition is called impedance for AC.

Answer:

Here is a Python function to calculate the sum of squares of a list of numbers:

python

Copy code

def sum_of_squares(numbers):

 return sum([x**2 for x in numbers])

You can use this function by passing a list of numbers as an argument:

scss

Copy code

numbers = [1, 2, 3, 4, 5]

result = sum_of_squares(numbers)

print(result) # Output: 55 (1^2 + 2^2 + 3^2 + 4^2 + 5^2)

Explanation:

The potential difference accros capacitor is=2V which basically means the difference of two potential values.

The capacitor is a two-terminal electrical device that stores energy in the form of electric charges.

The potential difference between the plates of both capacitors is VA - VB = V.

C1=0.20

C2=0.10

1/C=1/C1 + 1/C2

1/C=1/0.20 +1/0.10

1/C=15µf

C=1/15µf

Q=CV=1/15*6.0=0.4

Potential difference across capacitor C=0.20µf

V=0.4/0.20=2V

Capacitor connected in parallel means the potential difference V across each is the same and the charge on C1, C2 is different .

Learn more about capacitor here:-

brainly.com/question/17176550

#SPJ4

In order to breach a network, malicious players have targeted "endpoints," or any device or sensor connected to that network.

The CIA trinity is essential to information security because it improves security posture, assists enterprises in maintaining compliance with complicated requirements, and guarantees business continuity.

The CIA triad, also known as confidentiality, integrity, and availability, is a concept created to direct information security policies inside a company.

These storage places are protected by network security measures like firewalls, certificates, and passwords.

Therefore, malicious actors have targeted "endpoints," or any device or sensor connected to a network, in order to penetrate it.

To learn more about CIA triads, refer to the link:

https://brainly.com/question/29789418

#SPJ1

Some characteristics of a well-designed mixed methods study are Comprehensive and balanced, Robust data collection, Clear research objectives, structured data analysis, Meaningful integration of results

A well-designed mixed methods study should contain both qualitative and quantitative research approaches in its data collecting, which should be thorough and balanced. So that the data collection may be adapted to the study goals, the research objectives should be explicitly established. To obtain understanding of the research aims and conclusions, the data analysis should be structured and use both qualitative and quantitative methodologies. Finally, to provide a more comprehensive interpretation of the research, the findings from the qualitative and quantitative analyses should be meaningfully combined. An expert mixed methods study can be produced by a researcher by carefully taking into account these elements.

Learn more about data here-

brainly.com/question/11941925

#SPJ4

Time-based and multi-rate systems are the foundation of the Simulink approach.The generation of HDL code will benefit from this SO.

To learn more about Simulink model refer

https://brainly.com/question/29999033

#SPJ1

When a 5000 hp synchronous motor is running at full load with a leading pf of 87 percent and assuming 100% efficiency, the number of kilovolt-amperes that it is drawing will be C. 4287 KVA

1 HP = 746 watts

Pout =5000 HP = 5000*746 = 3730000 watts

Pout = 3730 KW

Given efficiency = 100%

Pin = Pout*100/efficiency

Hence Pin = 3730 KW

power factor ,pf= 0.87 leading

Kilovolt- amperes , S= Pin/pf = 3730/0.87 = 4287 KVA

Hence kilovolt-amperes = 4287 KVA

Learn more about ampere on:

https://brainly.com/question/18975063

#SPJ1

It is False, that according to Foundations of Designing User-Centered Systems, the fundamental attribution error of design is thinking that all users are like you. Design fundamental attribution fallacy can be defined as assuming that your users are exactly like you.

Knowing how much you need to know about your users is a difficult question to answer, yet understanding them and taking their needs into consideration in your design does not always guarantee success.

A person's tendency to attribute another person's behavior to their personality or character while attributing their own behavior to uncontrollable, external environmental factors is known as the basic attribution error. In other words, you typically treat yourself leniently while being fairly strict with others.

For instance, if you've ever called out a "lazy employee" for being late to a meeting and then later excused your own tardiness on the same day, you've engaged in the fundamental attribution fallacy.

The fundamental attribution error is caused by how people see the world. You typically have some idea of your personality, your objectives, and the outside factors that affect your day-to-day activities, but you hardly ever really understand what is going on with another person.  Similar to confirmation and overconfidence biases, their impact on business and daily life can be reduced by taking a number of measures.

To learn more about User-Centered Systems click here:

brainly.com/question/28346578

#SPJ4

To determine the torque required to rotate the circular plate, we need to calculate the viscous drag force that acts on the rotating plate due to the glycerin. In this case the required torque is 93.42 lb⋅in.

This force can be calculated using the formula:

F = 6πμrv

where μ is the viscosity of glycerin (3.13 × 10^-2 lb⋅s/ft^2), r is the radius of the circular plate (6 in.), and v is the velocity of the glycerin at the edge of the rotating plate.

Since the velocity distribution in the gap is linear, we can calculate the velocity of the glycerin at the edge of the rotating plate as half the velocity at the center of the rotating plate. The velocity at the center can be calculated from the rotational speed (1 rpm) and the radius of the plate:

v = ωr = 2π(1 rpm) * 6 in. = 37.7 in/s

So, the velocity of the glycerin at the edge of the rotating plate is:

v_edge = v/2 = 37.7 in/s / 2 = 18.85 in/s

Finally, substituting the values into the formula, we get:

F = 6πμrv = 6π * 3.13 × 10^-2 lb⋅s/ft^2 * 6 in. * 18.85 in/s = 15.57 lb

The torque required to rotate the circular plate can be calculated as the force multiplied by the radius:

T = Fr = 15.57 lb * 6 in. = 93.42 lb⋅in

So, the torque required to rotate the circular plate at 1 rpm is 93.42 lb⋅in.

You can learn more about torque at

https://brainly.com/question/20691242

#SPJ4

The Court found that the procedural default rule in this instance prevented Germany from providing the LaGrands with timely assistance as required under the Convention.

It was determined that the Court's ability to resolve international conflicts through judgements that have legal force is its mission and purpose. The purpose of article 41 is to protect the Court from being hindered in carrying out its duties if the parties' respective rights are not upheld. U.S.) Quick Factual Summary. Germany (P) filed a lawsuit against the United States (D) at the International Court of Justice, alleging that a U.S. law enforcement official neglected to inform detained foreign nationals of their rights under the Vienna Convention.

To learn more about LaGrands click the link below:

brainly.com/question/17197957

#SPJ4

The rsm value of y(t) = 2x(t) - 6 is 21

As xdc and x(t) RMS value is different means

          x(t) = xde + xne

                = 2 + Vm sinwt                Let xne =  Vm sinwt

xrms = 5V

xrms = √2² + (Vm/√2)²

5 = √4 + Vm²/2

25 = 4 + Vm²/2

Vm = √42

So,

   x(t) = (2 + √42 sinwt)volt

Now,

y(t) = x(t) - 2

     =  (2 + √42 sinwt) - 2

y(t) = √42 sinwt V

Yrms = (√42/√2)²

        = 21V

Know more about arbitrary voltage here:

https://brainly.com/question/13673039

#SPJ4

Refrigerants and fire extinguishers produce CFC (chlorofluorocarbons).CFCs (chlorofluorocarbons) are a group of synthetic, industrial chemicals that are commonly produced and used in a variety of applications, including refrigeration, air conditioning, and fire suppression.

The two main groups of items that produce CFCs are refrigerants and fire extinguishers. Refrigerants are used in air conditioners and refrigerators to transfer heat and provide cooling, while fire extinguishers contain CFCs as a propellant to help distribute the fire suppressant. It is important to note that CFCs have been phased out or restricted in many countries due to their adverse impact on the environment, including their contribution to ozone depletion and global warming. Alternatives to CFCs, such as hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs), have been developed and are now widely used as substitutes in many applications.

Find out more about Refrigerants

brainly.com/question/29491642

#SPJ4

Laboratory compaction tests serve as the foundation for figuring out the percentage of compaction and water content needed to obtain the desired engineering qualities, as well as for regulating construction to ensure that the desired compaction and water contents are realized.

Dynamic cone penetration tests, sometimes known as DCP tests, are a common way to measure soil compaction. DCP testing involves manually dropping a single or dual mass weight (referred to as the hammer) onto the push cone unit from a fixed height. A measurement is then made of the ensuing downward movement. By using rollers, superficial soil layers are "compacted," or made denser. Large weights are dropped onto the ground surface during a dynamic compaction process from a specific height. This procedure makes a crater and compacts the substance underneath the hole.

Learn more about  measurement,

https://brainly.com/question/18076822

#SPJ4

Answer:

Just 1 and 0

Explanation:

A binary code represents text, computer processor instructions, or any other data using a two-symbol system. The two-symbol system used is just "0" and "1" from the binary number system.

Any symbol, character, letter or number is represented by combination of just these two symbols.

The coordinates will be (a)0.6, 0.63,0.7 and (b)0.7,0.9, 0.87, 0.8 (c)0.6 and 0.7 (d)0.9, 0.87, 0.6 and (e)x+0.5, y+0.5, z+0.5.

(a) Body entering means we need to add 0.5, 0.5, 0.5 to the atomic position like 0.1 + 0.5, 0.13 + 0.5, 0.2 + 0.5 and we get new position that is

0.6, 0.63 and 0.7

(b) Center of symmetry will x, y, z into -x, -y, =z. Therefore the new position will be  

-0.1, -0.13, -0.2 that is 0.9, 0.87, 0.8

(c) A mirror plane containing the x and z axes are 0.6 and 0.7 respectively

(d) The 42 will have the same effect as 4 fold axis plus the translation of the atom which c/4 and we get the new co-ordinates that is

-0.1, -0.13 and 0.4+0.2 which is

0.9, 0.87, 0.6

(e) it means that it will add 0.5, 0.5, 0.5 to each atomic position and thus for each x, y, z given position it will generate another one air x+0.5, y+0.5, z+0.5.

Know more about co-ordinates here:

https://brainly.com/question/29329368

#SPJ4

Determination of reactions at the supports:

1. Let the sum of moments about a reaction point equal to ZERO (ΣM = 0)

2. Let the sum of vertical forces equal to 0 (ΣFy = 0).

At this point, all we need to know about moments is that they equal force times distance from a point (i.e. the force x distance from a point).

Take a look at the straightforward illustration of a 4 m beam with pin support at A and roller support at B. The free-body diagram is displayed below, where Ay and By represent the supports' vertical reactions:

We want to start by thinking about the total of moments around point B and setting it to zero. To demonstrate that this is possible at either end of the beam, we have chosen point B. (provided it is pin supported).

Learn more about Reactions at the Supports:

https://brainly.com/question/29754794

#SPJ4

General Motors Co. creates, produces, and sells vehicles, including automobiles, trucks, and auto components. Through General Motors Financial Company, Inc., .

General Motors employees are urged to create situations that appreciate viewpoints, histories, and ideas that may differ from their own. We work well together, appreciate one another, and all have the same ambition to be creative and successful. We want to be the most diverse business in the world. A worldwide pioneer in establishing and pushing the norms of ethical business practises, Ethisphere, named General Motors as one of the World's Most Ethical Companies® in 2022, making it the only original equipment manufacturer automaker to get this honour.

To learn more about Company click the link below:

brainly.com/question/29354835

#SPJ4

The time needed for the naphthalene ball to reduce from 2.0 cm to 0.50 cm in diameter is approximately 0.0037 sec.

To calculate the time required for the naphthalene ball to reduce from 2.0 cm to 0.50 cm in diameter, we can use Fick's second law of diffusion, which states that the rate of diffusion (J) is proportional to the gradient of the concentration of the diffusing substance.

We know that the naphthalene ball is in equilibrium with the surrounding air and hence the pressure exerted by the naphthalene vapors is equal to the vapor pressure of naphthalene at that temperature.

The time required can be calculated using the following equation:

t = (r2² - r1²) / (4 * D * ln(P2/P1))

Where, t is the time required, r1 and r2 are the initial and final radius of the sphere, D is the diffusivity of naphthalene in air, P1 and P2 are the initial and final pressure exerted by the naphthalene vapors which is equal to the vapor pressure of naphthalene at that temperature i.e 5 Torr.

Plugging in the known values we get,

t = (0.25 - 1) / (4 * 8.19 x 10^6 * ln(5/666)) = 0.0037 sec

So, the time required for the naphthalene ball to lower from 2.0 cm to 0.50 cm in diameter is about 0.0037 sec.

Learn more about   naphthalene ball  from

https://brainly.com/question/16694314

#SPJ1

See transcribed text below

A spherical ball of solid, nonporous naphthalene, a "moth- ball," is suspended in still air. The naphthalene ball slowly sublimes, releasing the naphthalene vapor into the surrounding air by molecular diffusion-limited process. Estimate the time required to reduce the diameter from 2.0 to 0.50 cm when the surrounding air is at 347 K and 1.0 atm. Naphthalene has a molecular weight of 128 g/mol, a solid density of 1.145 g/cm^3, and a diffusivity in air of 8.19 x 10^6 m^2/s, and exerts a vapor pressure of 5.0 Torr (666 Pa) at 347 K.

Disabling DTP (Dynamic Trunking Protocol) is a common administrative task in managing a local area network. There are two main occasions when an administrator might want to disable DTP:

On links that should not be trunking: Trunking is a technique that allows multiple VLANs to share a single physical link, increasing network efficiency and reducing the amount of cabling required. However, not all links should be trunking links. For example, links between end devices such as PCs and printers should not be trunked, as they are only required to carry traffic for a single VLAN. In these cases, disabling DTP can help prevent the link from accidentally becoming a trunking link.

When connecting a Cisco switch to a non-Cisco switch: DTP is a proprietary protocol developed by Cisco, and as such, it may not be supported by other vendor's switches. When connecting a Cisco switch to a non-Cisco switch, disabling DTP can help ensure that the link operates as a regular access link, rather than a trunking link, and prevent any potential compatibility issues that might occur.

By disabling DTP on these two occasions, administrators can maintain the stability and security of their networks, and ensure that their switches and links are operating as intended. Disabling DTP is usually done through the switch's command-line interface, and the exact procedure will vary depending on the model and version of the switch in use.

To know more about DTP (Dynamic Trunking Protocol): https://brainly.com/question/14810266

#SPJ4

Measure the spring's length change after hanging a weightless object from it. Calculate the object's weight using your graph. By putting the item on the kitchen scale, you can determine how precise your measurement is.

When an object is suspended on its hook, a spring scale detects weight or force. Pour loose material, such as sand, into a plastic bag, and hang the bag from the hook to measure. This one features a dual scale that reads 0-1000 g in 10 g increments and 0-10 Newtons in 0.1 Newton increments. A spring balance calculates an object's weight by balancing the force of gravity against the force of a stretched spring.

Learn more about measuring,

https://brainly.com/question/25716982

#SPJ4

Yes, it’s true that the primary key for the Student table in an RDB can be StudentID. A relational database table's main key, also known as a primary keyword, is a column that is unique for each record.

It serves as a special identity, like the number on a driver's license, a phone number with an area code, or a vehicle identification number (VIN). The main key of a relational database must be unique. There must be a primary key value for every row of data and no row can be null.

In relational databases, the administrator's preferences frequently determine the primary key that is selected. When the particular requirements of the users change, the primary key for a given database might be altered. In one application, for instance, all of the residents of a town may be uniquely identifiable by their driver's license numbers. However, in another circumstance, it could be more practical to identify them by their phone numbers.

The principal advantages of a primary key are as follows:

To learn more about primary key click here:

brainly.com/question/13437797

#SPJ4