The first nanosatellite from Bhutan to be launched into space was named BHUTAN-1. The satellite was created as part of the Birds-2 program at the Kyushu Institute of Technology. The Birds program aids nations in launching their initial satellite. On June 29, 2018, BHUTAN-1 was put into orbit by the SpaceX CRS-15 mission. On August 10, 2018, it was released from the International Space Station's (ISS) Kib module. The Earth was captured by the satellite's cameras.
Has Bhutan ever had satellite?The BHUTAN-1 (Bhutan), UiTMSAT-1 (Malaysia), and Maya-1 satellites were created as part of the Birds-2 program (Philippines). Graduate students from Bhutan who were attending Kyutech to complete their master's degrees created BHUTAN-1 (Kyushu Institute of Technology).
To know more about satellite visit:
https://brainly.com/question/9266911
#SPJ1
how long (in ns) does it take light to travel 1.00 m in vacuum? express your answer with the appropriate units.
It take light to travel 1.00 m in vacuum is 3.33 nano secs.
What is vacuum?
A space that is entirely devoid of matter a space that has been artificially partially (to the greatest extent possible) evacuated using an air pump. rarefaction at pressures lower than atmospheric pressure.
What is light ?
The electromagnetic radiation known as "light" is visible to the human eye. The wavelengths of electromagnetic radiation span a very large range, from radio waves with wavelengths measured in meters to gamma rays with wavelengths less than about 1 1011 meters.
apply C = S/t
so time t = 1/3e8
t = 3.33 nano secs.
Therefore, it take light to travel 1.00 m in vacuum is 3.33 nano secs.
Learn more about vacuum from the given link.
https://brainly.com/question/13005424
#SPJ4
. what articulatory adjustment could move the second peak of the filter from its current location near the 20th harmonic to a region near the 10th harmonic
Articulatory adjustment could move the second peak of the filter from its current location near the 20th harmonic to a region near the 10th harmonic.
What is articulatory adjustment?
Articulator setting is a modern term for the components of a speaker's voice quality that result from habitual muscle adaptations (eg, the tendency to stick the tongue low in the mouth). However, the general concept of setting as the long-term trend underlying present articulatory and hyper articulatory phonetic articulations has been the subject of debate in phonetic writings since the mid-17th century.
What is Harmonic motion?
In mechanics and physics, simple harmonic motion (sometimes abbreviated SHM) is a special type resulting from dynamic equilibrium between inertial and restoring forces proportional to the acceleration of a body from its static equilibrium position. is the periodic motion of the object This force is directly proportional to the magnitude of the object's displacement and acts on the object's equilibrium position. This creates an oscillation that is represented by a sinusoid and continues indefinitely unless checked by friction or other energy losses.
Articulatory adjustment could move the second peak of the filter from its current location near the 20th harmonic to a region near the 10th harmonic.
To know more about articulatory adjustment, visit:
https://brainly.com/question/11451546
#SPJ4
which of the following is a false statement about the methods? group of answer choices the time class has three constructors. time() is the default constructor. equals, lessthan, and tostring are all accessor methods. there are no static methods in this class. increment is a mutator method.
There are no static methods in this class is correct statement.
We are physically surrounded with friction. An object moving along a path is resisted by a force known as static friction. Lastly, use an easy example to comprehend it. Think about the activity we perform frequently called walking. We are constantly in contact with the floor while we work. Motion presses against the ground as we move it backward, and we then advance our feet.
One key concept to be aware of in order to minimize friction is the fact that it operates in the opposite direction from relative motion. This phenomena may be useful for reducing the speed of the action until it eventually comes to a stop.
To know more about static friction visit : brainly.com/question/13000653
#SPJ4
How do you calculate the force of gravity FG between two objects?.
Gravity = (gravitational constant × mass of first object × mass of the second object) / (distance between centers of two objects)².
Gravity is the force by which a planet or other object pulls an object toward its center. Gravity keeps all the planets in orbit around the sun. The attractive force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
The magnitude of this force depends on the mass of each object and the distance between the centers of the two objects. Mathematically, we say that gravity depends directly on the mass of an object and is inversely proportional to the square of the distance between them. Since gravity is a force, it provides the only way for objects to exchange energy and transform it into different states.
Learn more about Gravity here:-https://brainly.com/question/557206
#SPJ4
Find the power received by the telescope from such a signal
The following formula can be used to determine a telescope's resolving power: Resolving power is calculated as 11.25 seconds of arc divided by d, where d is the objective's diameter in centimeters.
A telescope can have one of three different powers. They are the ability to resolve, gather light, and amplify.
What is the telescope's power?
Divide the telescope's (in mm) focal length by the eyepiece's (in mm) focal length to calculate power (in mm). You can modify the telescope's power by swapping out one eyepiece with one focal length for another.
The height of the image divided by the height of the object is known as magnification.
To know more about telescope, visit:
https://brainly.com/question/24680733
#SPJ4
What is the property of dark matter that caused it to influence formation of galaxies?.
Dark matter would be an invisible type of matter with a total weight in the cosmos approximately five times the one of "regular" matter.
Dark matter, unlike ordinary matter, doesn't really interact well with electromagnetic force. It can't absorb, reflect, or emit light, which makes it extremely difficult to detect. Indeed, astronomers have deduced the presence of dark matter solely from the gravitational influence it appears to exert on visible stuff.
Dark matter would be the Universe's most enigmatic, non-interacting component. Their gravitational effects were needed to explain the spinning of galaxies, cluster dynamics, and the Universe's greatest-scale structure.
To know more about Dark matter
https://brainly.com/question/26078011
#SPJ4
1. for the image formed by a converging lens, when the magnification m is negative, is the image upright or inverted relative to the object?
The image is reversed when the magnification is negative. The rays on the far side of a converging lens diverge if the object is placed closer to it than the focal length allows.
Converging lenses—can they magnify in the wrong direction?Since a convex lens can create both virtual and physical images, it can provide either positive or negative magnification. For a virtual image, magnification is beneficial; for a real image, it is detrimental. A negative magnification might either be actual or imaginary.
An image that is magnified negatively is real since it is inverted. The picture is smaller than the object when the magnification is less than 1.
Learn more about types of images here:
brainly.com/question/3663586
#SPJ4
How is the behavior of food coloring in the cool and heated water different Brainly?.
The food colouring quickly diffuses (spreads out) into boiling water. The food colouring slowly diffuses (spreads out) through cold water.
What occurs when food colouring is added to cold water?The food colouring slowly diffuses (spreads out) through cold water. The food colouring diffuses more quickly because of the hot water. Particles travel more quickly at higher temperatures. As a result of the rapid movement, diffusion proceeds more quickly.
The colour will progressively permeate the water due to the molecules' random mobility. Diffusion will go more quickly with agitation.
The colour may fade more rapidly than you'd like when the water is excessively hot, which may also lead to dryness. The cuticles are also loosened by the heat.
Learn more about food colouring refer
https://brainly.com/question/23516560
#SPJ4
when does cross bridge cycling end? view available hint(s)for part g when does cross bridge cycling end? cross bridge cycling ends when calcium release channels in the sarcoplasmic reticulum open. cross bridge cycling ends when atp binds to the myosin head. cross bridge cycling ends when calcium ions are passively transported back into the sarcoplasmic reticulum. cross bridge cycling ends when sufficient calcium has been actively transported back into the sarcoplasmic reticulum to allow calcium to unbind from troponin.
Cross bridge cycling comes to a stop when enough calcium is processes take place back into the bloodstream to enable calcium to reassign from troponin.
What purpose does the sarcoplasm serve?In striated muscle, the sarcoplasmic reticulum (SR) serves as the primary intracellular calcium storage and is crucial in controlling excitation-contraction coupling (ECC) and intracellular calcium contents during contraction and relaxation.
What is sarcoplasmic thickening?More fluid flows to the muscles during a workout to supply energy. The term "sarcoplasmic hypertrophy" describes the expansion of this fluid's volume. Although it does not boost strength, it might give the appearance that muscles are bigger.
To know more about sarcoplasmic visit:
https://brainly.com/question/12970353
#SPJ4
when drawing a lewis structure for a free radical, which type of atom is more likely to receive the unpaired electron? select the correct answer below: the more electronegative element the less electronegative element the heavier element the lighter element
The less electronegative element is more likely to receive the unpaired electron.
What is lewis structure?A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule. Electrons are shown as "dots" or for bonding electrons as a line between the two atoms.
What is free radical?A free radical can be defined as an atom or molecule containing one or more unpaired electrons in valency shell or outer orbit and is capable of independent existence.
What is unpaired electron?An electron, in an atomic orbital, for which there is no other electron in the same orbital but with opposite spin; a characteristic of free radicals and other reactive species.
What is electronegative element?Electronegativity is a chemical property that describes the tendency of an atom or a functional group to attract electrons toward itself.
Why the less electronegative element is more likely to receive the unpaired electron?A more electronegative element is more likely to be surrounded by more electrons and fulfill its octet. A less electronegative element is more likely to have the electron deficiency, in this case the unpaired electron.
Know more about the electronegative element visit the link
https://brainly.com/question/24977425
#SPJ4
What is the interaction between two magnets?.
The direct interaction between two magnetic dipoles is referred to as magnetic dipole-dipole interaction, or dipolar coupling.
There are north and south poles on every magnet. The same poles repel one another whereas opposite poles are drawn to one another. The north-seeking poles of the iron's atoms line up in the same direction when it is rubbed against a magnet.
The laws of electromagnetism cause magnets to exert forces and torques on one another. Microcurrents of electrically charged electrons orbiting nuclei and the intrinsic magnetism of the basic constituent particles (such as electrons) that make up the material are what cause the magnetic fields that attract objects.
Today's technologically significant groups of materials, such as magnetic recording materials, magnetic carriers, and magnaflux sensors used to detect cracks, all depend on magnetic interactions.
To know more about magnetic dipoles visit the link:
https://brainly.com/question/27962324?referrer=searchResults
#SPJ4
use the instantaneous center of zero velocity to determine the angular velocity !ab of link ab and the velocity vb of collar b for the instant depicted. assume the quantities !0 and r to be known.
When the mass is at its equilibrium position (which corresponds to x=0), the velocity of the mass will be maximum.
Instantaneous center:
It is the center about a body moves in planer motion. The velocity of Instantaneous center is zero and Instantaneous center can be lie out side or inside the body. About this center every particle of a body rotates.
From the diagram
Where these two lines will cut then it will the I-Center. Point A and B is moving perpendicular to the point I.
If we take three link link1,link2 and link3 then I center of these three link will be in one straight line It means that they will be co-linear.
Therefore, when the mass is at its equilibrium position (which corresponds to x=0), the velocity of the mass will be maximum.
To know more about velocity, refer: https://brainly.com/question/12413963
#SPJ4
a baseball is thrown upward from a height of 2 meters with an initial velocity of 12 meters per second. determine its maximum height. (round your answer to two decimal places.)
Maximum hieght can be calculated by solving this equation:
h(t) = -4.9t² + 12t + 2
Formula:
h(t) = (1/2)at² + [tex]v_{0}[/tex]t + [tex]h_{o}[/tex]
where,
h(t) = height at time t
a = acceleration due to gravity = -9.8 m/s2
t = time
[tex]v_{0}}[/tex] = initial velocity = 12 m/s
[tex]h_{o}[/tex] = initial height = 2 m
hence,
∴ h(t) = (1/2)at² + [tex]v_{0}[/tex]t + [tex]h_{o}[/tex]
= h(t) = -4.9t² + 12t + 2
Take the derivative of h(t) with respect to t, set it to zero, and solve for t. It will get two answers. The positive ones are the ones you should use. This is when the ball reaches its maximum height. Substitute this t value into the h(t) equation to get the maximum height.
Therefore, Maximum height can be calculated by solving this equation:
h(t) = -4.9t² + 12t + 2
To know more about velocity, visit:
https://brainly.com/question/25749514
#SPJ4
emily pulls upward on her briefcase to support it as she stands at the bus stop, waiting for the bus to arrive.
For zero work ,either force acts perpendicular to displacement so emily pulls upward on her briefcase to support it as she stands at the bus stop, waiting for the bus to arrive is Zero work.
When force and displacement are perpendicular to one another or when neither of them is present, the work performed is referred to as zero work. For instance, when we hold an object and walk, the force acts downward while the displacement acts forward. A straightforward illustration of zero work is when you stand still while holding a bag in your hands. In order to counteract the gravitational force acting on the bag, you exert a force with your hands, but since the bag is not moved, neither gravity nor your force have any effect. When we carry an object while walking, displacement always moves the object forward rather than downward.
Learn more about zero work here:
https://brainly.com/question/14392445
#SPJ4
determine the inductive time constant if the current in an rl circuit builds up to one-third of its steady-state value in 5.00 s.
The answer is C = 1/R = 12.346
Solution:
1/R(5) = 1/0.405
1/R = 5/0.405
C = 1/R = 12.346
The time constant of an inductive circuit is the time it takes for the voltage across the inductor to reach 63% of its initial value. If a fraction of the total flux is linked between two coils, the amount of flux linkage can be defined as the fraction of the total flux linkage possible between the coils.
This fractional value is called the coupling coefficient and is given the letter k. An argument is deductive if the argument believes that the truth of the premises reliably establishes the truth of the conclusion. An argument is inductive if the argument believes that the truth of the premises only provides good reason to believe that the conclusion is likely to be true.
Learn more about The time constant here:- https://brainly.com/question/17088632
#SPJ4
what string tension would produce the same frequency on a smaller violin with a string length of 0.235m if the linerar density remains constant
If the linerar density stays constant, which it does when the string length is 0.235 meters, the same frequency would be produced by the same string tension of 41.58 N on a smaller violin.
f1=196 Hz
l1=0.33 m
t1=82N
Now f1=1/2l1√T1/μ
μ=4.9*10⁻³ kg/m
f2=f1=196 Hz
196=1/2*L₂√T₂/μ
T₂=41.58 N
In physics, tension is defined as the pulling force transmitted axially by a string, rope, chain, or similar object, or by each end of a rod, truss member, or similar three-dimensional object. Tension can also be defined as the action-reaction pair of forces acting at each end of the aforementioned elements.A force known as tension is particularly effective on medium-length materials like rope and cord that are also flexible. A gravitational force still exists in tension. When the body is moving upward, the tension is denoted by the formula T = W + ma.
Learn more about tension here:
https://brainly.com/question/2287912
#SPJ4
spheres a and b are identical in size and made from the same conducting material. sphere a is attached to an insulating rod, and sphere b is suspended from an insulating thread. sphere a initially has a charge of 10 nc, and sphere b is initially uncharged. question which of the following best represents the distribution of charge on the surfaces of spheres a and b when sphere a is brought near sphere b?
The two metal spheres will reach their equal potential when they come into contact. Additionally, when the metal spheres have the same radius, the identical potential results in the same charges.
The charge distribution at each phase will now be as follows:
Initial values are: A=+6q B=-3q C=0.
A=+1.5q B=+1.5q C=0 Spheres A and B touched and separated. When two spheres touch, charges will be divided equally and the overall charge will be preserved.
After touching, A increases by 0.75q, B increases by 1.5q, and C increases by 0.75q (same logic as above)
When C and B are touched, A = +0.75q, B = +1.125q, and C = 1.125q.
So, qc=+1.125q will be the ultimate charge on sphere C.
Generally speaking, potential describes a skill that is still being developed. The term is used in a wide range of disciplines, from physics to the social sciences, to describe objects that are in a state where they have the capacity to change in a variety of ways, from the straightforward release of energy by objects to the realization of abilities in people.
Learn more about potential here:
https://brainly.com/question/4305583
#SPJ4
What is a common characteristic of scientific models?.
The most significant and distinguishing aspect of science is that it relies on information acquired from verifiable sources, such as direct factual observation.
Which 3 modeling paradigms exist?A three-part modeling paradigm: environments, systems, and both symbolic and real-world objects, phenomena, and objects. There is a conceptual difference between enterprise and systems representations, with the former being open-ended and pragmatic and the latter being limited and standardized.
Why are models based on science used?Scientific models are used in a number of scientific fields, from physics and chemistry to ecology and the Earth sciences, to describe and predict the behavior of real things or systems.
To know more about Scientific models visit:
https://brainly.com/question/18893139
#SPJ4
How do quotas benefit domestic producers and cost domestic consumers?.
Quotas benefit and protect producers of goods in the domestic economy but consumers end up paying more when domestically produced goods cost more than imported goods.
Countries sometimes impose quotas on certain products in order to reduce imports and increase domestic production. In theory, quotas increase domestic production by limiting competition with foreign countries. Government programs that enforce quotas are often referred to as protectionist policies.
Import quotas restrict market access for imported products. The result is usually higher domestic prices paid by consumers. This leads to lower consumer surplus and lower real incomes. It may also reduce the choice consumers have in the market. A policy of reducing quantities is called a quota which is a government-imposed limit on the number of goods that can be bought or sold.
Learn more about Quotas benefits here:-https://brainly.com/question/2353154
#SPJ4
block a below weighs 1.90 n, and block b weighs 4.20 n. the coefficient of kinetic friction between all surfaces is 0.30. find the magnitude of the horizontal force necessary to drag block b to the left at constant speed if a and b are connected by a light, flexible cord passing around a fixed, frictionless pulley.
The magnitude of the horizontal force necessary to drag block b to the left at constant speed is 2.52 N.
Calculation:-
F - T -f₁ - f₂ = 0
⇒ F = -T + f₁ + f₂
f₂ = μk(ma + mb)g
f₁ = μkmag
T = μmag
F = μmag + μkmag + μk(ma+mb)g
F = 3 × 0.30 × 1.40 + 0.30 × 4.20 = 2.52 N
Force is a push or pulls upon an item because of the object's interaction with some other object. pressure is a power that can exchange the motion of an object. A force can reason an object with mass to alternate its speed, i.e., to boost up. pressure also can be described intuitively as a push or a pull. A force has each significance and course, making it a vector amount.
The phrase 'Force' has a unique meaning. At this degree, it is absolutely appropriate to describe a force as a push or a pull. A force is not something that an object consists of or 'has in it. A force is exerted on one object through another. The concept of a force isn't always restricted to living matters or non-living matters.
Learn more about force here:-https://brainly.com/question/12970081
#SPJ4
compare blue and orange light from the visible spectrum. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. which has the longer wavelength? which has the greater frequency? which has the greater energy? answer bank
When blue and orange color are given, then : Blue color has shorter wavelength and more energy as compared to orange.
What is visible spectrum?Visible spectrum is that portion of electromagnetic spectrum that is visible to the human eye. Electromagnetic radiation in this range of wavelengths is called visible light and human eye responds to wavelengths from about 380 to about 750 nanometers
Visible light comes in all the colors of the rainbow where each color has its own special frequency and wavelength. When all the colors are together, they make "white" light that we see.
Blue light has shorter wavelength more energy whereas orange light has the longer wavelength and low energy.
To know more about visible spectrum, refer
https://brainly.com/question/4901067
#SPJ4
which type of magnetic material cannot be used to make permanent magnets: a ferromagnetic substance, an antiferromagnetic substance, or a ferrimagnetic substance?
Antiferromagnetic materials are magnetic materials that cannot be used to create permanent magnets.
Explain about the Antiferromagnetic materials?In the case of anti-ferromagnetism, materials that exhibit magnetic ordering below a certain temperature exhibit magnetic magnetism.
Antiferromagnetic substances have magnetic moments that are antiparallel to the applied magnetic field, while ferromagnetic substances have magnetic moments that are parallel to the applied magnetic field. This causes antiferromagnetic materials to have zero total magnetism and positive magnetism for ferromagnetic materials.
Two magnetic characteristics of materials are ferrimagnetism and anti ferromagnetism. Ferrimagnetic materials are strongly drawn to a magnetic field in contrast to antiferromagnetic materials. Other magnetic properties of matter include para magnetism, ferromagnetism, and diamagnetism.
To learn more about Antiferromagnetic materials refer to:
https://brainly.com/question/31744
#SPJ4
The tub is in the shape of a rectangular box that is 0. 5 foot wide, 4 feet long, and 3 feet deep. What is the rate of change of the depth of the water in the tub at time t=6 ?.
Based on the information given, the rate of change of the depth of the water in the tub at time t=6 will be 0.25029 ft/min.
What is the formula of water depth?The straightforward formula "d/2 = vt" is used to determine the depth "d" because the speed of sound in water is known.
The water in the tub has a surface area of 0.5 feet by 4 feet, it should be mentioned. As a result, when t=6, the rate of change of volume will be determined as follows:
V'(6) = F(6) -L(6) (6)
V'(6) = arctan(/2 -6/10) – 0.03(20(6)-62 – 75) = 0.77058 – 0.27000
V'(6) = 0.50058
As a result, the relationship between the rate of change in depth and volume may be seen in the formula V = Bh, where B is the prism's base area and h is the product of V/B h', V', and B h'(6).
To learn more about water depth refer to:
https://brainly.com/question/28831566
#SPJ4
What happens to the balance of a reversible reaction at equilibrium when temperature is increased?.
The endothermic reaction now has the upper hand in the reaction's balance.
What is meant by endothermic reaction?
Endothermic reactions are chemical processes in which the reactants absorb heat energy from their surroundings to produce products.
Exothermic refers to chemical reactions that release energy. More energy is produced than is needed to break the bonds between the reactants when bonds are formed in exothermic process products. Chemical processes that can release or absorb energy are referred to as endothermic.
Endothermic chemical reactions are those that generally absorb (or use) energy. When bonds in the reactants are broken in endothermic reactions, more energy is absorbed than is released when new bonds are formed in the products.
To learn more about endothermic reaction refer to :
https://brainly.com/question/6506846
#SPJ4
How do you find the degree?.
The degree of a polynomial is found by finding the largest degree of given monomials.
A polynomial is formed by adding or subtracting monomials. In simple terms a monomial is an algebraic expression with a single term but can have multiple variables of different degrees.
A degree is the power value of a variable. In a expression, ax² + bx + c, a, b and c are constants and x is the variable. Here the entire expression is a polynomial that has a degree of 2 formed by adding three monomials. The monomial 1 is ax² that has a degree of 2. The monomial 2 is bx that has a degree of 1. The monomial 3 is c that has a degree of 0.
Therefore, the degree of a polynomial is found by finding the largest degree of given monomials.
To know more about degree of a polynomial
https://brainly.com/question/2284746
#SPJ4
A two-stage rocket is traveling at 1210m/s with respect to the earth when the first stage runs out of fuel. Explosive bolts release the first stage and push it backward with a speed of 40m/s relative to the second stage after the explosion. The first stage is three times as massive as the second. What is the speed of the second stage after the separation???
(2). The air-track carts in the figure(Figure 1) are sliding to the right at 1.0 m/s. The spring between them has a spring constant of 140 N/m and is compressed 4.4 cm. The carts slide past a flame that burns through the string holding them together..What is the speed of 100-g cart?What is the speed of 300-g cart?
Expert Answer Let the second stage has mass M The total mass o…
View the full answer
The first stage is three times as massive as the second.The speed of the second stage after the separation is 3495m/s
Given that,
Two stage rocket traveling at
V = 1210 m/s first stage on earth
When the fuel runs out, explosive bolts detonate and accelerate the rocket backward at a speed of V1 = 40 m/s in relation to the second stage.
Consequently, V1 = 40 - V2.
The first stage is three times more substantial than the second stage.
Allow the second-stage mass to be
M2 = M
Then, M1 = 3M
Velocity of second stage V2?
Applying conservation of linear momentum
Momentum before explosion = momentum after explosion
Momentum p=mv
Then
M1v1=M2v2
3M2×(1200m/s−35m/s)=M2
v23×(1165m/s)=v2
v2=3495m/s
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
Do quotas increase exports?.
No, quotas do not increase exports.
Quotas damage exporters because they limit the number of products that the exporter can promote in a country. With an absolute allowance, there may be a difficult restriction on the number of products the exporter can promote, so it should take delivery of lower income or boost its prices for you to earn the same quantity.
A quota or protectionism is a government-imposed exchange limit proscribing the quantity or value of products a nation imports or exports at some stage in a selected time.
Quotas can also limit home corporations’ potential to ship products to different countries. Quotas are distinct from price lists, which tax imports and exports. instead, they vicinity a difficult limit on imports and exports and are often used along with tariffs.
Learn more about imports and exports here; https://brainly.com/question/13269427
#SPJ4
2 and the mass of the stoplight is 15 kg, what can you determine about the tension in the string t2?
If 1 < 2 and the mass of the stoplight is 15 kg, the tension in the string T2 is T1 < T2.
Why is there tension?The pulling force conveyed axially by a string, cable, chain, or other similar single constant object, or by every end of a rod, or other similar three-dimensional object, is referred to as tension. The response pair of forces acting at the ends of the aforementioned elements can also be used to describe tension.
How is the tension inside a string determined?Utilize the following formula, adding the three variables mentioned above, to determine the stress of a string in pounds: Tension is calculated as (UW x (2 x L x F)2) / 386.4. Simply multiply the result by 4.45 to get the result in Newtons.
To know more about tension visit:
https://brainly.com/question/11348644
#SPJ4
What is the distance of two objects the attraction?.
The attraction between two objects at a distance is the Gravitational force.
An attraction force that exists between all mass-bearing objects is the gravitational force. A massed object draws another massed object; The force's magnitude is inversely proportional to the square of the distance between the two objects and directly proportional to their masses.
Mathematically it can be written as
F = G × m₁m₂/d²
m₁ and m₂ are the masses of the objects in kilograms, and d is the distance between them in meters. G is the universal gravitational constant, which means that it is the same everywhere in the universe.
And G = 6.67 x 10⁻¹¹ N m² / kg²
Know more about gravitational force here: https://brainly.com/question/12528243
#SPJ4
(Complete question)
What is the attraction between two objects at a distance?
TRUE/FALSE. when a semi-truck collides with a mini-cooper, the force that the truck exerts on the cooper is about 12 times larger than the force that the cooper exerts on the truck, if the mass of the cooper is 12 times smaller.
The statement that says the force that the truck exerts on the cooper is about 12 times larger than the force that the cooper exerts on the truck, if the mass of the cooper is 12 times smaller is false.
Newton's third law of motion says that for every action there is an equal and opposite reaction. This means that the magnitude of reaction force is equal and direction is opposite to the applied force.
So during collision the force exerted by the mini-cooper on the semi truck will be same the force exerted by the semi truck on the mini-cooper. When considering law of conservation of momentum and energy, the force exerted is not included, since it is same.
Therefore, the statement is false
To know more about Newton's third law of motion
https://brainly.com/question/974124
#SPJ4
