does the average mass of the object, based on the experimental trials, agree with the mass measured with a digital scale?

The image that best represents the resulting charge distribution on the conducting sphere is one where the rod is held close to the left side of the sphere on the stand, causing the left side of the sphere to become positively charged.

The rest of the sphere will remain neutral since the rod is not close enough to touch it. The positive charge on the left side of the sphere will cause the electrons in the material of the sphere to move away from it, leaving an area of positive charge on the left side. On the right side of the sphere, the electrons will remain in place, resulting in a neutral charge.

The image is provided below

Read more about Electrostatics:

https://brainly.com/question/17692887

#SPJ4

The time it takes for the sun to cross the meridian again depends on the period of rotation of the moon. The moon rotates once in about 27.3 Earth days, so it takes about 27.3 days for the sun to cross the meridian again.

The solar system is a collection of celestial bodies, including the sun and all objects that orbit around it, such as planets, moons, asteroids, comets, and other smaller bodies. The eight planets in our solar system, in order from the sun, are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. The sun is the center of the solar system and provides most of the energy and light for the planets. The solar system is located in the Milky Way galaxy and is thought to have formed about 4.6 billion years ago. the time by the celestial body to cross the meridian is dependent on the shape of the body and the distance and speed.

Learn more about Solar system:

brainly.com/question/12075871

#SPJ4

Masahisa's ball is 5.5 meters west and 2.5 meters north of the hole, assuming the curb on the edge of the green was at 0 degrees south of east.

This is a common mistake made by many golfers, as the direction of the shot is not always in line with the intended target. It's important to take the time to focus on your shot before hitting the ball, as this can drastically improve your accuracy and performance.

Additionally, understanding the terrain of the course and the obstacles it presents is key to successful golfing. Knowing the slope, speed of the green, and any other hazards, can help you plan your shots more accurately and ultimately result in a better score.

Learn more about golfing

https://brainly.com/question/29130908

#SPJ4

2 hours later the shadow will be 2.2 m long given that the time from sunrise to sunset is 15 hours.

If the time from sunrise to sunset is 15 hours, then the shadow of the buoy will be 2.0m long in 2 hours, since the shadow length increases at a rate of 1/15th of the buoy's height per hour.

To show the calculations, we can use the formula:

Shadow Length = 2.0m + (2 hours * (2.0m/15 hours))

Therefore, the shadow length in 2 hours will be 2.0m + (2 * (2.0/15)) = 2.2m

Assuming that the sun's position remains the same, the shadow of the ocean boy will be 2.2 m long 2 hours later. This is because the sun's position change throughout the day, so the shadow will not remain the same length for a given time. However, if the time from sunrise to sunset is 15 hours, then the shadow of the ocean boy will be 2.2 m long 2 hours later. This is because the sun's position moves across the sky throughout the day, so the shadow of the object will be shorter as the day progresses.

To know more about sunset please refer:

https://brainly.com/question/9646261

#SPJ4

Each object has a mass of approximately 2 x 10^-4 kg, or 20 grams, to the nearest kilogram.

The force of gravity between two objects is given by the equation:

F = G * (m1 * m2) / d^2

where F is the force of gravity, G is the gravitational constant (6.67 x 10^-11 N(m/kg)^2), m1 and m2 are the masses of the two objects, and d is the distance between them.

Gravity is a force of attraction between two masses. It is the force that keeps planets in orbit around the sun and determines the motion of objects on the surface of the earth. Gravity is one of the four fundamental forces of nature, and it was first described by Sir Isaac Newton in his laws of motion.

The strength of the gravitational force between two objects depends on the masses of the objects and the distance between them.

Given that the force of gravity between two objects that are 10 meters apart and have the same mass is 2.67 x 10^-10 N, we can solve for the mass of each object.

m1 = m2 = sqrt(F * d^2 / G) = sqrt(2.67 x 10^-10 N * (10 m)^2 / 6.67 x 10^-11 N(m/kg)^2) = sqrt(4 x 10^-8 kg^2) = 2 x 10^-4 kg

Therefore, each object has a mass of approximately 2 x 10^-4 kg, or 20 grams, to the nearest kilogram.

To know more about gravity refer to:

brainly.com/question/14874038

#SPJ4

The nuclei that exhibit the nuclear magnetic resonance phenomenon, the magnetic nuclei include all nuclei with even numbers of neutrons and protons.

Nuclei with certain magnetic characteristics are required in materials that take part in the MR process. The nuclei themselves must be tiny magnets with a magnetic property or magnetic moment in order for them to interact with a magnetic field.

An individual nucleus's neutron-proton composition determines its magnetic properties. Only some nuclides with an unusual balance of neutrons and protons exhibit magnetic properties.

All nuclei with even numbers of neutrons and protons are magnetic nuclei. Therefore, option a is correct.

To know more about the frequency, here

brainly.com/question/28543039

#SPJ4

--The complete question is, For a nucleus to exhibit the nuclear magnetic resonance phenomenon, it must be magnetic. Magnetic nuclei

include:

a. all nuclei with even numbers of neutrons and protons

b. all nuclei with odd numbers of protons

c. all nuclei with odd numbers of neutrons

d. both b and c--

3.6 kmph speed (in km h –1) you could theoretically accelerate a car (mass: 1t) with this energy.

The speed to which you could theoretically accelerate a car of mass 1 metric ton (1000 kg) depends on the amount of energy available to do so. In physics, the relationship between energy and velocity is given by the formula:

E = [tex]0.5mv^2[/tex]

Where m is the mass of the car and v is its velocity. So to find the velocity, we can rearrange the formula to solve for v:

v = [tex]\sqrt{} (2E/m)[/tex]

If we assume that the energy available for acceleration is E, then the velocity can be calculated as follows:

v = [tex]\sqrt{} (2E/1000 kg)[/tex]

Note that the units of energy must be consistent with those in the accelerate formula. In this case, if E is given in joules, then the velocity will be in meters per second. To convert the velocity to km/h, we need to multiply by (3600 s/hr)/(1000 m/km) = 3.6. So:

v (km/hr) = [tex]\sqrt{} (2E/1000 kg) * 3.6[/tex]

This formula gives the theoretical maximum velocity that could be achieved, assuming all of the energy is used for acceleration and ignoring any other factors such as friction or air resistance.

Learn more about accelerate here

https://brainly.com/question/2303856

#SPJ4

The complete question is

You have one coal available

To what speed (in km h –1) could you theoretically accelerate a car (mass: 1t) with this energy?

The required ratio of distance between the earth to the nearest star to that of the earth and the moon is calculated to be 1.08 × 10⁸.

The distance between the earth and the moon is given as 3.8 × 10⁵ km.

The distance between the earth to the nearest star is given as 4.1× 10¹³ km.

The ratio of distance between the earth and the nearest star to the earth and the moon is calculated as,

⇒ (4.1× 10¹³ km)/(3.8 × 10⁵ km) = 1.08 × 10⁸

Thus, the distance from the earth to the nearest star is 1.08 × 10⁸ times bigger than the distance between the earth and the moon.

To know more about distance:

https://brainly.com/question/19756282

#SPJ4

The size of the magnetic field is 24T.

The magnetic field (B) produced by a high voltage power line can be calculated using the formula:

B = μ x I / 2 x π x r

where:

μ is the magnetic constant (4π x 10⁻⁷ T m/A)

I is the current in the power line

r is the distance from the power line

To calculate the current (I), we first need to calculate the power (P) of the power line using the formula:

P = V² /R

V is the voltage of the power line

R is the resistance of the power line

Since the resistance (R) of the power line is not given, we can use the formula:

P = I² x R

to calculate the resistance (R) in terms of the current (I) and the power (P). Substituting this formula into the formula for power (P), we get:

R = P / I²

Substituting the given values, we get:

R = 350 x 10⁶ W / (I²)

I = √(350 x 10⁶ W / R)

P = 350 x 10⁶ W

V = 350 x 10³ V

A magnetic field is a field that surrounds a magnet or a moving charged particle, and produces a force that can affect other magnets or charged particles within the field. The magnetic field is a vector field and can be represented by the direction and magnitude of the field lines. The strength of a magnetic field can be measured in units of tesla (T).

Learn more about Magnetic field:

brainly.com/question/23096032

#SPJ4

Plasma protein and plasma colloid osmotic pressure keep the fluid in the vascular compartment.

Plasma proteins are the substances that cannot pass through the capillary wall, which develops an osmotic pressure. This pressure is called the colloid osmotic pressure. It is named to differentiate it from the osmotic pressure through the cell membrane. The concentration of proteins in the interstitial volume is 3 gm/dl and in the plasma is 7.5 gm/dl.

The protein with the maximum contribution to the colloid osmotic pressure in the plasma space is albumin with 21.8 mm Hg, which is followed by globulins (6 mm Hg), and then fibrinogen (0.2 mm Hg), giving a total colloid pressure of 28 mm Hg to move fluids inward.

To know more about Plasma protein, here

https://brainly.com/question/13462489

#SPJ4

Answer:

Approximately [tex]6.57\; {\rm cm \cdot s^{-1}}[/tex].

Explanation:

When an object of mass [tex]m[/tex] travels at a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object would be [tex]p = m\, v[/tex].

Before the catch:

Therefore, the total momentum of the hockey and the goalie before the catch was:

[tex]2.6928\; {\rm kg\cdot m\cdot s^{-1}} + 0\; {\rm kg \cdot m\cdot s^{-1}} = 2.6928\; {\rm kg\cdot m\cdot s^{-1}}[/tex]

The goalie and the hockey move at the same velocity after the catch. Let [tex]v[/tex] denote that velocity. The total momentum of them would be:

[tex]\begin{aligned}& m(\text{goalie})\, v + m(\text{hockey})\, v \\ =\; & (m(\text{goalie})+ m(\text{hockey}))\, v \end{aligned}[/tex].

Assume that momentum is conserved during the catch. Hence:

[tex]\begin{aligned}& (m(\text{goalie})+ m(\text{hockey}))\, v \\ &= (\text{momentum after catch}) \\ &= (\text{momentum before catch}) \\ &= 2.9628\; {\rm kg \cdot m\cdot s^{-1}}\end{aligned}[/tex].

Rearrange the equation to find [tex]v[/tex], the velocity of the goalie and the hockey after the catch:

[tex]\begin{aligned}v &= \frac{2.9628\; {\rm kg \cdot m\cdot s^{-1}}}{m(\text{goalie})+ m(\text{hockey})} \\ &= \frac{2.9628\; {\rm kg \cdot m\cdot s^{-1}}}{0.102\; {\rm kg} + 40.9\; {\rm kg}} \\ &\approx 0.0657\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Apply unit conversion:

[tex]\begin{aligned}v &\approx 0.0657\; {\rm m\cdot s^{-1}} = 6.57\; {\rm cm\cdot s^{-1}}\end{aligned}[/tex].

The angle θ is 22.5° when the radius is 54 meters and the velocity is 54 km/h.

Given the radius (r) = 54m

The velocity (v) = 54km/h x 5/18 = 15m/s

Let the angle at tangent in a circular path = θ

We know that from tangent of circle tan θ= v^2/rg where g is the gravity = 10m/s^2

Here since the body moves along circular path as radius is given centripetal force acts on it. A force that causes a body to follow a curved path is known as a centripetal force. Any force that changes the direction of motion toward the center of a circular motion is known as a centripetal force.

tanθ  = 15 x 15/ 54 x 10 = 0.416

θ = tan-(0.416)

θ = 22.5

Hence, the angle of tangent = 22.5°

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

The moon moves approximately 12 degrees along the zodiac in one day.

The Moon is the Earth's only natural satellite and the fifth largest moon in the Solar System. It is approximately one-quarter the size of Earth and is approximately 238,855 miles from Earth. The Moon's surface is characterized by craters, mountains, valleys, and vast plains. It has no atmosphere, no water, and only a small amount of dust. The Moon's surface is also heavily cratered, with many impact craters from collisions with meteoroids and asteroids. The Moon has a significant effect on Earth, producing tides, stabilizing the planet's axial tilt, and providing a unique environment for scientific research and exploration. The first humans landed on the Moon in 1969 as part of the Apollo 11 mission, and since then several missions have been sent to explore and study the Moon.

Learn more about Moon:

brainly.com/question/13538936

#SPJ4

By dividing the arc length by the circle's circumference and multiplying the result by 360 degrees, one can calculate the angle of an arc.

(1) Arc Length = θ × (π/180) × r,  where r is the radius and L is the length of an arc. θ = The arc's central angle.

(2) Each plane has a specific d-spacing. This is the separation between two successive, parallel atomic planes. Active and neutral wires are included in a single phase. At the switchboard, the neutral wire is attached to the earth. Three active wires, often known as phases, and one neutral wire make up a three phase system.

(3) The distances of 3.56x and 2.478 represent the distances between the radiation source and detector, respectively.

(4) The density and kind of detector material, as well as the radiation energy to be measured, all influence detector efficiency. Gas-filled detectors, scintillation detectors, and semiconductor detectors are the three types of X-ray detectors used in XRF spectrometers.

(5) An instrument for examining and measuring the structure of materials is called an X-ray diffractometer, or XRD machine. X-rays are the best choice for investigating the interplanar distances in crystalline materials since they have a high energy and short wavelength compared to visible light.

(6) According to the particular requirements of the equipment, three types of detectors are most frequently employed when referring to radiation detection instruments. These three types of detectors are solid state, gas-filled, and scintillators.

(7) Using X-ray diffraction (XRD) patterns, quantitative phase analysis calculates the relative proportion of elemental elements or phases. The relative amount of a given phase in the mixture affects the intensity of that phase's diffraction lines.

To learn more about diffraction click here https://brainly.com/question/12290582

#SPJ4

Machines make work easier by A: "increasing the amount of force that is exerted", C: increasing the distance over which the force is exerted" ,and D:  "changing the direction in which the force is exerted".

A machine makes work easier by increasing the mechanical advantage of the task being performed. Mechanical advantage refers to the ratio of the force applied to the machine to the force produced by the machine. By using a machine, a smaller force can be used to achieve the same result as using a larger force without the machine.

"

Complete question:

How does a machine make work easier?

by increasing the amount of force that is applied,

decreasing the distance over which the force is applied.

increasing the distance over which the force is applied.

changing the direction in which the force is applied.

"

You can learn more about  Machines at

https://brainly.com/question/14696504

#SPJ4

The magnitude of its velocity immediately after the explosion is A) 102√135°.

After an explosion, the momentum of the original vessel must be conserved. If we consider the x and y components separately, the x and y components of the momentum of the two equal mass pieces are equal and opposite, so they cancel each other out.

The momentum of the third piece must equal the total initial momentum, so its velocity can be calculated using the equation for momentum: mv = m1v1 + m2v2 + m3v3.

Since the two equal mass pieces have the same velocity, the magnitude of the velocity of the third piece is √(30^2 + 30^2) = 102√, and it will be at an angle of 135° from the x-axis.

For more questions like Velocity click the link below:

https://brainly.com/question/13963075

#SPJ4

The complete question is attached below.

Answer:

The Answer Is O.5 m/s

Explanation:

we have an equation:

(u is for before collison and v is for after collision)

rearrange,

Put values and answer will be 0.5m/s

Answer:

3.5

Explanation:

we have an equation:

m1u1+m2u2=m1v1+m2v2 where, m=mass

v=final velocity

u=intial velocity

then this means:

v2=m1u1+m2u2-m1v1÷m2

when we substitute on the equation:

v2=3×2.0+1×0.5-3×1÷1

=6+0.5-3

=6.5-3

=3.5

The required current in milliamps when charge and time are given is calculated to be 0.15 milliamps.

Current is known to be defined as rate of flow of charge.

If q is the charge represented in coulombs, t is in seconds, then i is represented in ampere.

Mathematically, i = q/t

Here, static charge q is given as 0.3 μc = 0.3 × 10⁻⁶ c

Time t is given as 2 milliseconds = 2 × 10⁻³ s

Now, let us find the current in milliamps.

i = q/t

Current i = (0.3 × 10⁻⁶)/(2 × 10⁻³) = 0.15 × 10⁻³ A = 0.15 milliamps

Thus, the current is calculated to be 0.15 milliamps.

To know more about current:

https://brainly.com/question/1418143

#SPJ4

Your average velocity was zero, thus choice (b) will be accurate.

Let x be the separation between my home and my friend's home. I leave my home and travel to my friend's home, where I spend some time. I then return home after that. My initial position and final position are identical, hence there is no displacement.

However, the following determines how far my car travels: d = 2x.

Let t represent the whole amount of time it takes me to travel from home to home. My instantaneous velocity will be zero at my friend's place because I spent some time there. The average velocity will be given by: Because the total displacement is zero, the average velocity will be:

[tex]V_{avg} = \frac{8}{t}=0[/tex]

The acceleration changed as I traveled and stayed at a friend's house; it was never continuous. My average speed as I covered a distance of d=2x is shown by: [tex]v^{'}_{avg} = \frac{d}{t} = \frac{2x}{t}[/tex]

Learn more about velocity:

brainly.com/question/18084516

#SPJ4

Object and image are 0 cm far apart .

The thin lens equation for an object distance "d_o" and image distance "d_i" with focal length "f" is:

1/d_o + 1/d_i = 1/f

The height of the image is given as 6.1 times the height of the object, so the magnification "m" is:

m = -d_i / d_o = h_i / h_o = 6.1

Rearranging the magnification equation, we have:

d_i = -m * d_o

Substituting the thin lens equation into the magnification equation:

d_i = -m / (1/d_o + 1/f)

Substituting the known values:

d_i = -6.1 / (1/d_o + 1/35)

Solving for d_o, we find:

d_o = (35 * 6.1) / (6.1 - 1) = 210 cm

The distance between the object and image is:

d = d_i - d_o = 210 - 210 = 0 cm

You can learn more about focal length at

https://brainly.com/question/28039799

#SPJ4

Area under the F-t graph gives the impulse delivered to the ball.

Impulse  J=21×18000×1.5=13500 Ns

Force exerted on the ball   F= ΔtJ =1.513500=9000 N

Maximum force exerted on the ball is  20000 N

Fmax = 20000 N

ta = 1.5 ms

tb = 3 ms

Fmax = 20000 N

ta = 1.5 ms

tb = 3 ms

(a) The impulse is given by the area of force time graph.

Impulse = 0.5 (3 - 1.5) x 10-3 x 20000 = 42.75 Ns

(b) The average force is given by

Impulse =average force x time

42.75 = Average force x 1.5 x 10-3

Average force = 28500 N

Learn more about Force and time here :

https://brainly.com/question/2394008

#SPJ4

This is true because the process of dry ice sublimating and the puddle freezing both involve chemical bonds breaking.

In the case of dry ice (solid CO2), the sublimation process occurs when the CO2 molecules absorb enough energy to break the bonds holding them together in a solid state. This energy is supplied by the surrounding air, causing the CO2 to transition directly from a solid to a gas.

In the case of the puddle freezing, the water molecules lose energy and slow down, allowing hydrogen bonds to form between the molecules. As more and more bonds form, the liquid transitions to a solid (ice). The breaking of hydrogen bonds in the liquid and the formation of new bonds in the solid are chemical processes that represent a breaking and forming of chemical bonds.

"

Complete and correct question

I dry ice sublimating and becoming a ga and a puddle freezing into ice on a clod night both involve chemical bond breaking

True or false

"

You can learn more about chemical bonds at

https://brainly.com/question/819068

#SPJ4

a charged particle's trajectory won't resemble a field line:
The charged particle's trajectory will veer away from the field line if it is subjected to additional forces, such as a magnetic field or an electric field from another source.

The trajectory of a charged particle will alter and diverge from the field line if it collides with another particle.
Field lines illustrate the hypothetical path taken by a positive test charge in the presence of an electric field. The charged particle will follow the field lines if the conditions are such that it is only exposed to the portion of the electric field indicated by the field lines.The charged particle may encounter additional forces in real-world situations, which could cause it to diverge from the field lines in its trajectory.
For instance, a charged particle will move more crookedly than directly when a magnetic field is present. Additionally, if the charged particle collides with another particle, the trajectory will alter as a result of the momentum that is transferred, and the charged particle will stop following the field line.

Learn more about trajectory here:

https://brainly.com/question/28874076

#SPJ4

The volume of the material would change by 0.00012%.

Material is anything that has physical existence and can be perceived by one or more of the five senses. It is anything that has mass and occupies space. Examples of materials include wood, metal, plastic, paper, fabric, glass, stone, water, air, and living organisms.

The coefficient of volume thermal expansion (β) is related to the coefficient of linear thermal expansion (α) by the equation β = 3α. Therefore, the value of β for the given material would be 3(4 × 10-5K-1) = 0.00012K-1.
This means that for every degree Kelvin of temperature change, the volume of the material would change by 0.00012%.

To learn more about material
https://brainly.com/question/774923
#SPJ4

After reducing the dimensions, the new resistance of the rectangular block will be three times of the initial value.

Let us assume that initially dimensional conditions of the rectangular blocks are like this,

B is breadth,

L is length,

H is the height,

p is the resistivity.

Now, the resistance will be given by,

R = pL/(BxH)

Now, when the dimension are reduced to a third of the initial values, we get new resistance,

R' = (pL/3)/(BxH/9)

R' = 3pL/(BxH)

Putting R = pL/(BxH),

R' = 3R

So, the new resistance will be three times of the initial value.

To know more about resistance, visit,

https://brainly.com/question/17563681

#SPJ4

the time required for a displacement of 1.00 m for an electron traveling at a uniform velocity of 1.3 x [tex]10^{5}[/tex] m/s is approximately 7.69 x [tex]10^{-7}[/tex]seconds.

To find the time required for a displacement of 1.00 m, we can use the formula:

time = displacement ÷ velocity

Substituting the values, we have:

time = 1.00 m ÷ 1.3 x [tex]10^{5}[/tex] m/s

time = 7.69 x [tex]10^{-7}[/tex] seconds

this calculation demonstrates the extremely short time scales involved in the motion of electrons, which can move extremely quickly due to their small size and mass.

Know more about motion of electrons

https://brainly.com/question/29607452#

#SPJ11

The final velocity of an object falling 1.25 meters from rest, just as it strikes the ground is 4.95[tex]\frac{m}{s}[/tex].

The position of an object as a function of time at any point in time can be used to explain an object's motion. The equations describing the motion, which relate the initial and current velocities, acceleration, and displacement of the object, can be obtained in the form that excludes time in the case of uniformly accelerated motion. One example of a uniformly accelerated motion is free fall.

The following relationship exists between an object's velocity and its distance travelled:

Here

[tex]v^{2} -u^{2} =2as[/tex]

The object's starting velocity is u

and final velocity is

Object acceleration is given by the symbol a;

The acceleration in free fall is the acceleration brought on by gravity:

a=g=9.8[tex]\frac{m}{s^{2} }[/tex]

Initial velocity is 0 since the item started at rest;

When we solve for the final velocity, we get:

v = [tex]\sqrt{2as}[/tex]

Calculating, we obtain:

v = [tex]\sqrt{2\times9.8\times1.25}[/tex]

v=4.95[tex]\frac{m}{s}[/tex]

Learn more about velocity

brainly.com/question/28738284

#SPJ4

In parallel with the original network R sub eq will increase a small amount.

Resistance is a measure of an object's opposition to the flow of electric current. In electrical circuits, it is the property of a material that resists the flow of electric charge and converts electrical energy into other forms of energy, such as heat.

Resistance is measured in ohms (Ω) and is determined by the properties of the material and its dimensions. Resistance is an important factor in the design of electrical systems, as it can affect the behavior and efficiency of the circuit. The amount of resistance in a circuit can be increased or decreased by changing the length, cross-sectional area, and composition of the material through which the current flows.

To learn more about Resistance, click the given link,

https://brainly.com/question/13532749

#SPJ4

The coefficient of kinetic friction if the loving pig slides down a certain 43° slide in three times the time it would take to slide down a frictionless 43° slide is 1.35.

Friction is a kind of force that opposes the force which is making a displacement of the object.

Analyze the forces on the pig of mass m. The incline angle is θ.

The +x direction is “downhill. Then apply  Newton’s second law to the x- and y-axes

leads to

                                      mgsinθ−f = ma

Solving these along result for the pig’s downhill acceleration:

                                      a=g(sinθ−μcosθ)

To determine the time to slide from rest through a downhill distance l , we use :    

                          l=vt+ 1/2 at² ⇒t= √3l/a

which leads us to conclude that if t/t  =9a. Putting in what we found out

above about the accelerations, we

have

                          gsinθ=9g(sinθ−μcosθ)

Apply the angle θ = 43. We will obtain the value of  μ as 1.35.

Find more on kinetic friction :

https://brainly.com/question/13828735

#SPJ1

The speed of the two-blob system immediately after collision can be calculated using the conservation of momentum principle. According to this principle, the total momentum of a closed system remains constant if no external forces act on it. In this case, the initial momentum of the 4 kg blob is 4 kg x 5 m/s = 20 kg m/s and the initial momentum of the 2 kg blob is 0 (at rest).

The total initial momentum is 20 kg m/s. After the collision, the two blobs stick together and form a single 6 kg blob, so the final momentum of the system is mv, where m is the total mass of the system (6 kg) and v is the velocity of the system.

From the conservation of momentum principle, we have:

m1 x v1 + m2 x v2 = mf x v

where m1, v1 are the mass and velocity of the first blob before the collision, m2, v2 are the mass and velocity of the second blob before the collision, mf is the total mass of the system after the collision (6 kg), and v is the velocity of the system after the collision.

Substituting the values, we get:

4 kg x 5 m/s + 2 kg x 0 m/s = 6 kg x v

Solving for v, we get:

v = (4 kg x 5 m/s) / 6 kg = 1.3 m/s

So, the speed of the two-blob system immediately after collision is 1.3 m/s.

Learn more about Speed:

brainly.com/question/28224010

#SPJ4