Draw a Lewis structure for thiocyanic acid, HSCN, adding charges and lone electron pairs to the appropriate atoms.

Answer:

Gases act more ideal at lower pressure beacuse the attractive forces between molecules will decrease or become less significant compared to the empty space between them.

Explanation:

Generally, a gas behaves more like an ideal gas at higher temperature and lower pressure as the potential energy due to intermolecular forces becomes less significant compared with the particles "kinetic energy" and the size of the molecules become less significant compared to the empty space between them.

Attractive forces between molecules, decrease the pressure of a reak gas, slowing the molecules and reducing collisions with the walls.The higher the value of a gas, the greater the attraction between molecules and the more easily the gas will compress.

answered by: John Glenly Pillazo Mahusay

Answer:

264 g/mol

Explanation:

#electrons equal #protons = 106

Plus 1 charge => m protons = 106 + 1 = 107

Mass number: 107 + 157 = 264 g/mol

Answer:

Oxygen, O₂ is the limiting reactant

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2H₂ + O₂ —> 2H₂O

Next, we shall determine the masses of H₂ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of H₂ = 2 × 1 = 2 g/mol

Mass of H₂ from the balanced equation = 2 × 2 = 4 g

Molar mass of O₂ = 16 × 2 = 32 g/mol

Mass of O₂O from the balanced equation = 1 × 32 = 32 g

SUMMARY:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 g of H₂ reacted with 32 g of O₂.

Therefore, 10 g of H₂ will react with

= (10 × 32)/4 = 80 g of O₂.

From the calculations made above, we can see that a higher mass (i.e 80 g) of O₂ than what was given (i.e 5 g) is required to react completely with 10 g of H₂. Therefore, O₂ is the limiting reactant.

Oxygen has been the limiting reactant in the reaction.

A limiting reactant can be defined as the reactant in the reaction in which the product concentration has been dependent.

The balanced equation for the formation of water has been:

[tex]\rm 2\;H_2\;+\;O_2\;\rightarrow\;2\;H_2O[/tex]

For the formation of reaction to form 2 moles of water, 2 moles of hydrogen reacts with 1 mole of oxygen.

The moles can be calculated as:

Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]

The moles of Hydrogen in 10 g [tex]\rm H_2[/tex]:

Moles = [tex]\rm \dfrac{10}{2}[/tex]

Moles of hydrogen = 5 mol.

Moles of Oxygen in 5 grams Oxygen:

Moles = [tex]\rm \dfrac{5}{32}[/tex]

Moles of oxygen = 0.156 mol.

For the reaction with 2 moles of Hydrogen 1 mole of Oxygen has been required.

For reacting with 5 mol of Hydrogen, moles of oxygen required are:

Moles of oxygen = [tex]\rm \dfrac{1}{2}\;\times\;5[/tex]

Moles of oxygen required = 2.5 moles.

The available oxygen = 0.156 moles.

Since the moles of oxygen available is lesser than required, the formation of the product has been dependent on the concentration of the oxygen.

Thus, oxygen has been the limiting reactant in the reaction.

For more information about the limiting reactant, refer to the link:

https://brainly.com/question/14225536

Answer:

Kp=Kc *(RT)+-3

Explanation:

The relation between Kp and Kc is given below:

Where,

Kp is the pressure equilibrium constant

Kc is the molar equilibrium constant

R is gas constant , R = 0.082057 L atm.mol⁻¹K⁻¹

T is the temperature in Kelvins

Δn = (No. of moles of gaseous products)-(No. of moles of gaseous reactants)

For the first equilibrium reaction:

Δn = (0)-(2+1) = -3

Thus, Kp is:

Kp=Kc *(RT)+-3

Answer:

64 g

Explanation:

Step 1: Write the balanced equation

2 Na + Cl₂ ⇒ 2 NaCl

Step 2: Calculate the moles corresponding to 25 g of Na

The molar mass of Na is 22.98 g/mol.

25 g × 1 mol/22.98 g = 1.1 mol

Step 3: Calculate the moles of NaCl formed from 1.1 moles of Na

The molar ratio of Na to NaCl is 2:2. The moles of NaCl formed are 2/2 × 1.1 mol = 1.1 mol.

Step 4: Calculate the mass corresponding to 1.1 moles of NaCl

The molar mass of NaCl is 58.44 g/mol.

1.1 mol × 58.44 g/mol = 64 g

Answer:

Mg3N2

Explanation:

it would be magnesium as it would loss to electron so it would have 10 electron. you can see in the picture above .

hope this helps :)

Answer: The number of series in Mendeleev's Periodic table is 12.

Explanation:

Horizontal rows present in the periodic table are called periods. Vertical rows in the periodic table are called series.

Mendeleev gave periodic table in the year 1869 by arranging elements according to their atomic weights a in tabular form.  

Mendeleev's periodic table depicts 12 periods/series.

Thus, we can conclude that the number of periods/series in Mendeleev's Periodic table is 12.

Answer:

#6  8.67x10²⁴ atoms

#7  

1. Atom

2. Formula unit

3. Molecule

4. Ion

Explanation:

#6 First we calculate how many carbon moles are there in 7.00 moles of C₂F₂, keeping in mind that there are 2 C moles per C₂F₂ mol:

As for carbon dioxide, there are 0.400 C moles in 0.400 moles of CO₂.

We calculate the total number of C moles:

Finally we calculate the number of atoms in 14.4 C moles, using Avogadro's number:

#7

Answer:

Draw the skeletal structure for: (E)-hept-5-en-2-one

Explanation:

The root word hept indicates that the given compound has seven carons in its longest chain.

-en- primary suffix indicates that the compound has one double bond in it.

2-one indicates that the compound has -C=O bond in the second carbon.

The prefix (E) indicates that the highest priority groups are on the opposite direction of the double bond.

The structure of the given molecule is:

Answer:

the fraction of collisions with energy greater than Eact

Explanation:

The activation energy of a reaction stands as a sort of energy barrier between reactants and products. It is only reactants that possesses energy greater than the activation energy that can be converted from reactants to products.

When the temperature of the system is increased, more particles acquire energy greater than the activation energy. Hence, the fraction of collisions with energy greater than the activation energy increases so the rate of reaction increases likewise.

Answer:

oxidizer

Explanation:

an example of an oxidizers are oxygen and hydrogen peroxide

Answer:

Bohr Model is the correct answer

Answer:

Electron -Cloud Model

Explanation:

Just took the quiz got 100%

Answer:

The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....

Answer:

the answer is 2.1 atm

Explanation:

the way people normally do it is by simply deciding the 325k with the 1.2

Answer:

The full amount (5.00 g) will be dissolved in 1 L of water at 25°C.

Explanation:

The molecular weight (MW) of Vanillin (C₈H₈O₃) is calculated from the chemical formula as follows:

MW(C₈H₈O₃) = (12 g/mol x 8) + (1 g/mol x 8) + (16 g/mol x 3) = 152 g/mol

If 0.070 mol of C₈H₈O₃ are soluble per liter of water at 25°C, the maximum mass that can be dissolved in 1 L is:

0.070 mol x 152 g/mol = 10.64 g

Since 5.00 g is lesser than the maximum amount that can be dissolved (10.64 g), the added amount will be completely dissolved in 1 L of water at 25°C.

Answer:

Explanation:

BrCl₃ is an interhalogen compound with a hybridization of sp³d. The approximate bond angles can be predicted from the structure (attached below). Although, the lewis structure might be predicted to be trigonal bipyramidal from the structure, it is however a T-shaped geometry because of it's two lone pairs.

Also, from the structure attached, it can be predicted that the approximate bond angles about the central atom is 120° (360 ÷ 3) since each of the three chlorine atoms is equally spaced about the central atom.

The Lewis structure for BrCl₃ is attached to the image below. The bond angles around the central atom, bromine (Br), are 90 degrees between the bromine and each chlorine atom. Therefore, option B is correct.

A Lewis structure, also known as an electron-dot structure or Lewis dot structure is a diagram that represents the valence electrons of an atom or molecule.

Bromine (Br) is in Group 7A and has 7 valence electrons, while each chlorine (Cl) atom in Group 7A also has 7 valence electrons.

Br: 1 atom × 7 valence electrons = 7 valence electrons

Cl: 3 atoms × 7 valence electrons = 21 valence electrons

Total valence electrons = 7 + 21 = 28

To learn more about the bond angle, follow the link:

https://brainly.com/question/31324226

#SPJ6

Answer:

CO2

Explanation:

Carbon dioxide is a chemical compound that consists of two oxygen atoms and one carbon atom

The question is incomplete, the complete question is shown in the image attached

Answer:

A and B

Explanation:

The electrophilic substitution of arenes yields a cation intermediate. The positive charge of the cation is delocalized over the entire ring.

The -CN group directs incoming electrophiles to the ortho/para position. The resonance structures for the chlorination of benzonitrile are shown in the question.

Recall that -CN is an electron withdrawing group. The resonance forms that destablize the carbocation intermediate are those in which the -CN group is directly attached to the carbon atom bearing the positive charge as in structures A and B.

Answer:

carrying capacity

Explanation:

Thus, the carrying capacity is the maximum number of individuals of a species that an environment can support. Population size decreases above carrying capacity due to a range of factors depending on the species concerned, but can include insufficient space, food supply, or sunlight.

Answer:

v2=5.11L

Explanation:

given

v1=2.58L

N1=0.118mol

N2=0.234

v2=x

according to charles law V1/N1=V2/N2

2.58/0.118=V2/0.234

21.86=V2/0.234

21.86×0.234= v2

5.116L=v2

5.116L is the

answer or u can simplify it and make 5.1 L

Answer:

1. Its formation requires very strong updrafts = a. Hail

2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain

3. Precipitation from cumuliform clouds is typically of this nature = c. Shower

4. Precipitation from stratus clouds is typically of this nature = Drizzle

Explanation:

Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.

Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.

Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.

Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.

Answer:

HCl

Explanation:

I took the test :)

Out of the following compounds , HCl is an acid as it has hydrogen as the proton donor.

Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.

According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic  acids  depending on the number of protons which are liberated on dissociation.

Acids are widely used in industries  for  production of fertilizers, detergents  batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.

Learn more about acids,here:

https://brainly.com/question/29796621

#SPJ6

Answer:

89.35 hour

Explanation:

Recall :

Charge on 1 electron = 1.6 × 10^-19 C

1 mole contains = 6.023 × 10^23

Therefore, the charge on 1 mole of electron will be :

Charge per electron × 1 mole :

(1.6 × 10^-19) * (6.023 * 10^23) = 96500 C = 1 Farad

1 Farad = 96500 C

Using the formula :

Q = Current(I) * time(t)

Q = I*t

t = Q/I

Current, I = 0.3 A

t = 96500 / 0.3

t = 321666.66 second

t = 321666.66 / 3600 = 89.35 hour

this means that you are wearing warm clothes in warm temperature .quite easy sir

Answer:

shduxhheufufffhduduf

Answer:

Object: To demonstrate phototropism

equipments: A black box, window with light source, a well watered potted plant.

Experiment: A wellwatered potted plant is placed inside a darkened black  box that is having a small window on one side. This is called as phototropic chamber. Window is remain closed for a day the plant shows normal growth.

Whereas if window is opened atwo days it will be found that shoot tip bends and grows towards light proving that it is positively phototropic.

Answer:

0.796 M

Explanation:

Step 1: Given data

Gravimetric concentration (Cg): 4.78 g%g

Density of the solution (ρ): 1.00 g/mL

Step 2: Calculate the volumetric concentration of the solution (Cv)

We will use the following expression.

Cv = Cg × ρ

Cv = 4.78 g%g × 1.00 g/mL = 4.78 g%mL

Step 3: Calculate the molarity of the solution (M)

The volumetric concentration is 4.78 g%mL, that is, there are 4.78 g of acetic acid per 100 mL of solution. We can calculate the molarity using the following expression.

M = mass solute / molar mass solute × liters of solution

M = 4.78 g / 60.05 g/mol × 0.1 L = 0.796 M

the answer is silicon!!