Draw the flowchart to accept three numbers check if they are same then display sum otherwise display product

Answers

Answer 1

The required flow chart is depcied as follows

Start

Input three numbers, A,B, and C

Compare A, B,   and C

If A, B, and C are the same, then

 Display the sum of A, B, and C

Else

 Display the product of A, B, and C

End

What is the explanation for the above?

The program starts by inputting three numbers, A, B, and C.

The program then compares A, B, and C.

If A, B, and C are the same, then the program displays the sum of A, B, and C.

Otherwise, the program displays the product of A, B, and C.

The program ends.

Learn more about Flow Chart at:

https://brainly.com/question/6532130

#SPJ1

Draw The Flowchart To Accept Three Numbers Check If They Are Same Then Display Sum Otherwise Display

Related Questions

When people spend 200 minutes watching an NFL game, they
Select one:
a. see less than 15 minutes of football action.
b. see more football action than commercials.
c. listen to commercials for more minutes than they listen to commentators.
d. see more video replays than actual play during the game.

Answers

When people spend 200 minutes watching an NFL game, they see less than 15 minutes of football action.

In a typical NFL game that lasts for approximately three hours, the actual playtime is considerably less than the total duration. The average NFL game consists of four 15-minute quarters, adding up to 60 minutes of game time. However, due to various factors such as timeouts, commercial breaks, and halftime, the actual time the ball is in play is significantly lower.

According to studies, the average amount of time the ball is in play during an NFL game ranges from 10 to 15 minutes. This means that out of the 200 minutes spent watching the game, viewers witness less than 15 minutes of football action.

During the remaining time, viewers are exposed to a variety of elements such as commercials, commentary, and video replays. Although the exact duration may vary from game to game, it is common for commercials to take up a significant portion of the broadcast.

Advertisements are strategically placed throughout the game, including breaks between plays, timeouts, and at the end of quarters. Therefore, it is likely that viewers spend more time listening to commercials than they do listening to commentators.

In conclusion, when people spend 200 minutes watching an NFL game, they see less than 15 minutes of football action. The rest of the time is filled with commercials, commentary, and video replays, making the actual gameplay a relatively small portion of the overall viewing experience.

Learn more about broadcast here:

https://brainly.com/question/29517000

#SPJ11

several controls are used to safeguard inventory, and one of those is to:___

Answers

One of the controls used to safeguard inventory is implementing an effective system of internal controls.

An effective system of internal controls plays a crucial role in safeguarding inventory. These controls encompass various measures and practices designed to ensure the accuracy, security, and proper handling of inventory throughout its lifecycle. One essential control is implementing physical security measures. This involves securing the inventory in locked areas or using security devices such as alarms, cameras, and access control systems to deter theft or unauthorized access.

Another control is implementing proper inventory tracking and reconciliation procedures. This includes conducting regular physical counts of inventory to compare against recorded quantities in the system. Discrepancies between physical counts and system records should be promptly investigated and resolved. Additionally, employing segregation of duties is vital, ensuring that different employees are responsible for various aspects of inventory management, such as receiving, storage, and record-keeping. This helps prevent potential fraud or errors by requiring collusion among employees to manipulate inventory records.

Furthermore, organizations can implement technological solutions, such as barcode or RFID systems, to enhance inventory control. These systems facilitate real-time tracking of inventory movements, allowing for immediate identification of discrepancies or irregularities. Regular internal and external audits are also essential to validate the accuracy and effectiveness of the inventory control measures in place.

In conclusion, safeguarding inventory requires implementing a range of controls, including physical security measures, proper tracking and reconciliation procedures, segregation of duties, technological solutions, and regular audits. By establishing and maintaining an effective system of internal controls, businesses can minimize the risk of inventory shrinkage, theft, or inaccuracies, ensuring the integrity and reliability of their inventory management processes.

Learn more about internal controls here:

https://brainly.com/question/31565132

#SPJ11

which comparison operator matches a pattern that includes wildcards?

Answers

The LIKE operator is a comparison operator that is used to selected records by comparing field values to a pattern that contains one or multiple wildcard characters.

In computer programming, an operator is a symbol that often denotes an act or process. These symbols were modified from logic and mathematics. A specific value or operand can be manipulated by an operator.

The fundamental building block of every program, operators are used for anything from extremely basic tasks like counting to sophisticated techniques like security encryption. An operator manipulates a mathematical , logical value, or operand, exactly a given way to produce a specific result, depending on the kind of operator.

To know more about operator on:

brainly.com/question/28238572

#SPJ4

Unlike a form, you use a report writer only to retrieve data.
a) True b) False

Answers

b) False. Unlike a form, a report writer is not only used to retrieve data. It is also used to organize, format, summarize, and present data in a structured manner for reporting purposes.

While retrieving data is one of the primary functions of a report writer, it is not the only purpose. A report writer is a software tool or feature that allows users to design, create, and customize reports based on data stored in a database or other sources. In addition to retrieving data, a report writer provides functionalities to organize, format, summarize, and present data in a structured and meaningful way. Users can define report layouts, add headers and footers, apply formatting, include calculations and summaries, and often incorporate graphs, charts, or tables for visual representation. Reports generated by a report writer can serve various purposes such as analysis, documentation, decision-making, or presentation.

Learn more about report writer here:

https://brainly.com/question/31857754

#SPJ11

You want to view the number of commands your HISTSIZE environment variable is set to save. You don't want to have to scroll through all the environmant variables. Which command shows you the value for the HISTSIZE variable?

Answers

To view the value of the HISTSIZE environment variable, you can use the "echo" command followed by the variable name.

The "echo" command in Unix-like operating systems is used to display text or variable values on the terminal.

By using the dollar sign ($) followed by the variable name (HISTSIZE in this case), we can access and display the value stored in that variable.

When you run the command "echo $HISTSIZE," the system will retrieve the value assigned to the HISTSIZE variable and print it on the terminal screen.

This allows you to quickly and easily see the specific value set for the HISTSIZE environment variable without having to navigate through all the environment variables.

learn more about echo here:

https://brainly.com/question/31171104

#SPJ11

Firewalls can be categorized by processing mode, development era, or structure. True
False

Answers

Firewalls can be categorized by processing mode, development era, or structure.

Firewalls, which are security devices used to monitor and control network traffic, can indeed be categorized based on different criteria such as processing mode, development era, or structure.

Processing mode refers to how a firewall handles network traffic. There are different modes such as packet filtering, stateful inspection, application-level gateway, and next-generation firewalls, each with its own approach to inspecting and filtering network packets.

Development era refers to the time period when a particular type of firewall technology was developed. Firewalls have evolved over time, and different generations or eras of firewalls have been introduced, each with advancements in capabilities and security features.

Structure refers to the architectural design of a firewall. Firewalls can be categorized based on their structure, such as network layer firewalls (operating at the network level), application layer firewalls (operating at the application level), or hybrid firewalls (combining features from different types).

Therefore, it is true that firewalls can be categorized based on processing mode, development era, or structure, allowing for different approaches and choices in implementing network security.

learn more about security here:

https://brainly.com/question/31684033

#SPJ11

file:///Users/NPyne/Desktop/Benchmark%20Intake%20report%20part%20one%20and%20two_Pyne.html

based on the client above how would I report each of these scales and tests? please detailed in explaintion to better help me understand.

MMPI:

Butcher, J. N., Williams, C. L., Graham, J. R., Tellegen, A., & Kaemmer, B. (1989). Minnesota multiphasic personality inventory-2 (MMPI-2). Minneapolis: University of Minnesota Press.



MCMI:

Millon, T., & Davis, R. D. (1996). Millon clinical multiaxial inventory-III (MCMI-III). Minneapolis: National Computer Systems.



PAI:

Morey, L. C. (1991). Personality Assessment Inventory (PAI). Odessa, FL: Psychological Assessment Resources.



STAI:

Spielberger, C. D., Gorsuch, R. L., Lushene, R. E., Vagg, P. R., & Jacobs, G. A. (1983). Manual for the State-Trait Anxiety Inventory. Palo Alto, CA: Consulting Psychologists Press.



CTS:

Straus, M. A., Hamby, S. L., Boney-McCoy, S., & Sugarman, D. B. (1996). The revised Conflict Tactics Scales (CTS2). Thousand Oaks, CA: Sage.



SSRS:

Gresham, F. M., & Elliot, S. N. (1990). Social skills rating system. Circle Pines, MN: American Guidance Service.

Answers

When reporting each scale or test, it's important to include the full name, author(s), and location of the publisher. This ensures accuracy and clarity in your report.

To report each of the scales and tests mentioned, you can follow these steps:

1. MMPI (Minnesota Multiphasic Personality Inventory-2):
- Begin the report by stating the full name of the test, which is the Minnesota Multiphasic Personality Inventory-2 (MMPI-2).
- Mention the authors of the test, which are Butcher, J. N., Williams, C. L., Graham, J. R., Tellegen, A., and Kaemmer, B. (1989).
- Include the location of the publisher, which is Minneapolis: University of Minnesota Press.

2. MCMI (Millon Clinical Multiaxial Inventory-III):
- Start the report by mentioning the full name of the test, which is the Millon Clinical Multiaxial Inventory-III (MCMI-III).
- State the authors of the test, which are Millon, T., and Davis, R. D. (1996).
- Specify the location of the publisher, which is Minneapolis: National Computer Systems.

3. PAI (Personality Assessment Inventory):
- Begin the report by stating the full name of the test, which is the Personality Assessment Inventory (PAI).
- Mention the author of the test, which is Morey, L. C. (1991).
- Include the location of the publisher, which is Odessa, FL: Psychological Assessment Resources.

4. STAI (State-Trait Anxiety Inventory):
- Start the report by mentioning the full name of the test, which is the State-Trait Anxiety Inventory (STAI).
- State the authors of the test, which are Spielberger, C. D., Gorsuch, R. L., Lushene, R. E., Vagg, P. R., and Jacobs, G. A. (1983).
- Specify the location of the publisher, which is Palo Alto, CA: Consulting Psychologists Press.

5. CTS (Conflict Tactics Scales):
- Begin the report by stating the full name of the test, which is the Revised Conflict Tactics Scales (CTS2).
- Mention the authors of the test, which are Straus, M. A., Hamby, S. L., Boney-McCoy, S., and Sugarman, D. B. (1996).
- Include the location of the publisher, which is Thousand Oaks, CA: Sage.

6. SSRS (Social Skills Rating System):
- Start the report by mentioning the full name of the test, which is the Social Skills Rating System (SSRS).
- State the authors of the test, which are Gresham, F. M., and Elliot, S. N. (1990).
- Specify the location of the publisher, which is Circle Pines, MN: American Guidance Service.

To know more about important visit:

https://brainly.com/question/31444866

#SPJ11

(MC) During the Linux installation process you are asked to choose the file system type for your partitions. Which is the most common Linux file system to choose?

Answers

The most common Linux file system to choose during the installation process is Ext4.

Ext4 (Fourth Extended File System) is the most widely used and default file system for Linux distributions. It is an advanced version of the Ext file system family and offers improved performance, scalability, and reliability. Ext4 supports large file sizes, efficient storage allocation, journaling for data integrity, and backward compatibility with earlier versions of Ext file systems. It is compatible with most Linux distributions and provides features like file encryption, extended attributes, and delayed allocation. While other file systems like Btrfs and XFS also have their advantages, Ext4 remains the popular choice due to its stability, maturity, and wide support across Linux platforms.

To know more about Linux click the link below:

brainly.com/question/30176199

#SPJ11

t/f Bitmap graphics are resolution dependent because each element is a discrete pixel.

Answers

True, bitmap graphics are resolution dependent because each element is a discrete pixel.

Bitmap graphics, also known as raster graphics, are composed of individual pixels arranged in a grid-like pattern. Each pixel represents a specific color or shade, and the collective arrangement of pixels forms the image. Because each element in a bitmap graphic is a discrete pixel, the resolution of the image directly impacts its quality and clarity.

Resolution refers to the number of pixels per unit of measurement, typically expressed as pixels per inch (PPI) or dots per inch (DPI). Higher resolutions result in more pixels, providing greater detail and sharpness in the image. Lower resolutions, on the other hand, have fewer pixels, leading to a loss of detail and potential pixelation.

As bitmap graphics are resolution dependent, scaling or resizing them can impact their quality. Enlarging a bitmap image beyond its original resolution may result in pixelation, where individual pixels become visible and the image appears blocky. Conversely, reducing the size of a bitmap image may result in loss of detail due to the merging or elimination of pixels.

bitmap graphics are resolution dependent because they consist of individual pixels, and their quality and clarity are directly influenced by the resolution of the image.

Learn more about Bitmap graphics here:

https://brainly.com/question/31765484

#SPJ11

When using a site-to-site VPN, what type of device sits at the edge of the LAN and establishes the connection between sites?
a.VPN proxy
b.VPN server
c.VPN transport
d.VPN gateway
D. vpn gateway

Answers

The device that sits at the edge of the LAN and establishes the connection between sites when using a site-to-site VPN is a VPN gateway.

A VPN gateway is a type of networking device that connects two or more devices or networks together in a VPN infrastructure. It is designed to bridge the connection or communication between two or more remote sites, networks, or devices and/or to connect multiple VPNs together.

A VPN gateway can be a router, server, firewall, or similar device with internet working and data transmission capabilities. However, in most cases, a VPN gateway is a physical router device.

The VPN gateway is generally installed on the core VPN site or infrastructure. The VPN gateway is configured to pass, block, or route VPN traffic.

It provides core VPN-specific networking services such as IP address assignment and management, dynamic and static routing, and the maintenance of routing tables.

learn more about networks here:

https://brainly.com/question/13992507

#SPJ11

What does the future hold for mainframes and supercomputers? Defend your answer.

Answers

The integration with parallel processing and cloud computing will further enhance their capabilities, enabling faster and more efficient processing. Mainframes and supercomputers will remain crucial in handling large-scale data processing and complex computations.

The future of mainframes and supercomputers looks promising as they continue to play crucial roles in different areas. Here's a step-by-step breakdown of what the future holds for each:

1. Mainframes:
Mainframes are high-performance computers that excel at processing large volumes of data. In the future, they are likely to continue evolving and adapting to modern technologies. Although they may not be as prevalent as in the past, they will still be used in industries that require secure and reliable computing, such as banking, finance, and government sectors.

2. Supercomputers:
Supercomputers are designed for highly complex calculations and data-intensive tasks. Their future lies in advancing scientific research, weather forecasting, computational biology, artificial intelligence, and more. As technology progresses, supercomputers will become more powerful, allowing for faster simulations and processing speeds.

3. Parallel Processing:
Both mainframes and supercomputers will benefit from advancements in parallel processing. Parallel processing involves breaking down tasks into smaller components that can be processed simultaneously. This allows for faster and more efficient computing. As parallel processing becomes more sophisticated, mainframes and supercomputers will be able to handle even larger and more complex tasks.

4. Integration with Cloud Computing:
The integration of mainframes and supercomputers with cloud computing will play a significant role in their future. Cloud computing provides scalability, flexibility, and accessibility to these powerful machines.

To know more about handling visit:

https://brainly.com/question/14045922

#SPJ11

the default hello timer value for stp bpdu frames is

Answers

The default hello timer value for STP BPDU frames is 2 seconds. BPDU frames are used by STP (Spanning Tree Protocol) to manage the network's loop prevention mechanism.

STP ensures that the network topology does not contain any loops. It does this by keeping a root bridge that is responsible for forwarding data frames to all the network's destinations. The root bridge election is based on the STP bridge priority value. The bridge with the lowest priority becomes the root bridge.The hello timer value for BPDU frames is the time between two consecutive BPDU frames sent by a switch to its neighbor switch.

The BPDU frames are sent to determine the root bridge and the topology information. The default hello timer value for STP BPDU frames is 2 seconds. If a switch does not receive a BPDU frame from its neighbor for a period that is equal to three times the hello timer value (6 seconds by default), it assumes that the link is down.

The hello timer value can be changed using the "spanning-tree hello-time" command on the Cisco switches. The value can be set to between 1 and 10 seconds. However, changing the value may affect the STP convergence time and cause network instability. Therefore, it should be done carefully and after thorough testing.

Know more about the STP

https://brainly.com/question/31257368

#SPJ11

Write a program to declare an integer array of size 10 and fill it with random numbers using the random number generator in the range 1 to 5. The program should then perform the following: . Print the values stored in the array Change each value in the array such that it equals to the value multiplied by its index. Print the modified array. You may use only pointerioffset notation when solving the programt Example run: The sales red the fa (& 7 4- 8 A hp 144 ( 9 Add text 1 Draw P

Answers

We declare an integer array 'arr' of size 10. We then use the 'srand' function to seed the random number generator with the current time to ensure different random numbers on each program run.

Here's a program in C that fulfills the requirements you mentioned:

#include <stdio.h>

#include <stdlib.h>

#include <time.h>

int main() {

   int arr[10];

   srand(time(NULL)); // Seed the random number generator

   // Fill the array with random numbers between 1 and 5

   for (int i = 0; i < 10; i++) {

       arr[i] = rand() % 5 + 1;

   }

   // Print the original array

   printf("Original Array: ");

   for (int i = 0; i < 10; i++) {

       printf("%d ", arr[i]);

   }

   printf("\n");

   // Modify each value in the array by multiplying it with its index

   for (int i = 0; i < 10; i++) {

       arr[i] = arr[i] * i;

   }

   // Print the modified array

   printf("Modified Array: ");

   for (int i = 0; i < 10; i++) {

       printf("%d ", arr[i]);

   }

   printf("\n");

   return 0;

}

We fill the array with random numbers between 1 and 5 using the rand function. To limit the range, we use the modulo operator (%) to get the remainder when divided by 5 and add 1 to shift the range from 0-4 to 1-5.

We then print the original array using a for loop. After that, we modify each value in the array by multiplying it with its index. Finally, we print the modified array.

Each array element is accessed using pointer arithmetic notation, 'arr[i]', where 'i' represents the index of the element.

Upon running the program, you should see the original array printed first, followed by the modified array.

To know more about integer array

brainly.com/question/32893574

#SPJ11

a file with a .bat file extension is called a ____ file.

Answers

A file with a .bat file extension is called a batch file.

A file with a .bat file extension is commonly known as a batch file. The ".bat" stands for "batch," which refers to a series of commands or instructions that are executed by the computer's operating system. Batch files are typically used in Windows systems to automate repetitive tasks or to execute a sequence of commands in a specific order. They are plain text files that contain a list of commands that can be executed together with a single command. When a batch file is run, the commands within it are executed one after another, allowing users to perform complex operations without manually entering each command. Batch files are a convenient way to automate tasks and streamline processes in the Windows environment.

Learn more about batch files here:

https://brainly.com/question/12944860

#SPJ11

each data type is a class from which a variable can be ____.

Answers

The solution is each data type is a class from which a variable can be instantiated.

In many programming languages, including object-oriented languages like Java or C++, data types are defined as classes. A class serves as a blueprint or template for creating objects or variables of that particular type.

When we declare a variable with a specific data type, we are essentially creating an instance or an object of the corresponding class. The variable then represents an instance of that class, and we can perform operations or access properties specific to that data type through the variable.

For example, the data type "String" in Java. The "String" data type is actually a class in Java's standard library.

Similarly, other data types in programming languages, such as integers, floating-point numbers, booleans, or custom-defined classes, are all implemented as classes or class-like structures. When we declare variables with these data types, we are creating instances of the corresponding classes.

In summary, each data type in programming is typically represented as a class or a class-like structure. When we declare a variable with a specific data type, we are creating an instance of the corresponding class, and that variable can then be used to access the properties and methods defined by that class.

Learn more about data type here:

https://brainly.com/question/32178091

#SPJ11

what can be used to add delete or modify objects in active directory

Answers

To add, delete, or modify objects in Active Directory, you can use tools like Active Directory Users and Computers, PowerShell, Active Directory Administrative Center, or LDAP-based clients. The choice of tool depends on factors such as administrative access levels, automation requirements, and the complexity of the operations you need to perform.

1. Active Directory Users and Computers (ADUC): ADUC is a Microsoft Management Console (MMC) snap-in that provides a graphical interface for managing Active Directory objects. It allows you to create, delete, and modify user accounts, groups, organizational units (OUs), and other objects. ADUC is a built-in tool available on Windows Server and can be installed on client machines as part of the Remote Server Administration Tools (RSAT).

2. PowerShell: PowerShell is a powerful command-line scripting language provided by Microsoft. It includes a set of cmdlets specifically designed for managing Active Directory. With PowerShell, you can perform various operations on Active Directory objects programmatically, including adding, deleting, and modifying objects. PowerShell offers more flexibility and automation capabilities compared to GUI-based tools like ADUC.

3. Active Directory Administrative Center (ADAC): ADAC is a newer administration tool introduced in Windows Server 2008 R2. It provides an enhanced graphical interface for managing Active Directory objects, with additional features and capabilities compared to ADUC. ADAC offers a more streamlined and intuitive user experience, allowing administrators to perform tasks like object creation, modification, and deletion.

4. LDAP (Lightweight Directory Access Protocol): LDAP is an industry-standard protocol for accessing and managing directory services, including Active Directory. It provides a programmatic interface for adding, deleting, and modifying objects in Active Directory using LDAP-compliant clients or custom applications. LDAP allows for more advanced control and customization of Active Directory operations but requires knowledge of LDAP syntax and programming.

5. Third-Party Tools: There are various third-party tools available that offer advanced management capabilities for Active Directory. These tools often provide additional features, automation options, and reporting functionalities beyond what the built-in tools offer. Examples include Quest Active Directory Management Tools, ManageEngine ADManager Plus, and SolarWinds Server & Application Monitor.

Learn more about windows here:

https://brainly.com/question/33363536

#SPJ11

which statement describes the physical topology for a lan?

Answers

A physical topology is a geometric configuration of devices in a network that describes how cables and wires interconnect and transmit data packets. There are several types of network topologies available such as mesh topology, star topology, tree topology, ring topology, and bus topology.

A physical topology for a LAN refers to the arrangement of cables and computers in a network. The various types of physical topologies are:

Bus Topology: In this topology, all devices are connected to a single cable. Each device in a bus topology receives all data from the source and ignores data not addressed to it. If any device in the network fails, the entire network goes down.Star Topology: A central hub is the point of connection in this topology, with each device connected to the hub via a cable. If one device fails, the others can continue to operate. The star topology is a popular topology for LANs, making it easier to identify and isolate faults, such as cable breakages.Ring Topology: In a ring topology, each computer is connected to two other computers, forming a ring. Data travels through the network in one direction only, and a token is passed around the network, allowing devices to transmit data.Mesh Topology: In this topology, all devices are connected to each other, with each device acting as a relay for data. This makes a mesh topology one of the most resilient and efficient topologies for LANs, although it is challenging to set up.Tree Topology: A tree topology is a combination of bus and star topologies. The tree topology can be used to build large networks, with central hubs connecting multiple sub-networks. If a sub-network fails, only devices in that network are affected.

Know more about the physical topology

https://brainly.com/question/13818848

#SPJ11


An application layer address using TCP/Ipv4 looks like:

Answers

An application layer address using TCP/IPv4 is represented by a combination of the IP address and port number.

In TCP/IP networking, the application layer address is a combination of the IP address and the port number. The IP address identifies the host or device on the network, while the port number specifies a specific application or service running on that host.

An IPv4 address consists of four sets of numbers separated by periods, such as 192.168.0.1. It uniquely identifies a device within a network. The port number is a 16-bit number that ranges from 0 to 65535.

It is used to distinguish different services or applications running on a device. Commonly used port numbers include 80 for HTTP (web browsing), 25 for SMTP (email), and 443 for HTTPS (secure web browsing).

To specify an application layer address using TCP/IPv4, you combine the IP address and port number using a colon as a delimiter. For example, 192.168.0.1:80 represents the IP address 192.168.0.1 with the port number 80, indicating a web server running on that specific device.

An application layer address using TCP/IPv4 is represented by combining an IP address and a port number, allowing for the identification of a specific device and the service or application running on it.

Learn more about TCP/IPV4 here:

https://brainly.com/question/31942870

#SPJ11

Which of the following statements are true for an array based binary search? Best case, worst case, and average case are the same complexity. It's like a linear search and starts at the first element of the array. Its Big-Oh is O(n) The array needs to be sorted. Its Big-Oh is O(Ign)

Answers

Among the statements you provided, the following are true for an array-based binary search:

The arrangement requires sorting.

Unlike a linear search, it initiates from a different element within the array.

The Big-O notation for it is O(log n) instead of O(n).

How to explain

The complexities of a problem can vary depending on whether it is in the best case, worst case, or average case scenario. This statement implies that the optimal scenario has a complexity of O(1), but the less favorable and typical scenarios have a complexity of O(log n).

To summarize:

The arrangement necessitates organization.

The time required for the task increases in a logarithmic manner with an algorithmic complexity of O(log n).

Instead of beginning at the initial element, it employs a strategy of splitting and conquering.

O(1) represents the best scenario, whereas O(log n) is the average and worst situations.

Read more about arrays here:

https://brainly.com/question/29989214

#SPJ1

which of these can not be the first value for a tracking signal?

Answers

The first value for a tracking signal cannot be zero.

A tracking signal is a measurement used in forecasting and monitoring the performance of a forecasting model or system. It indicates the accuracy of the forecast by comparing the cumulative error (the difference between the forecasted and actual values) over a certain period.

The tracking signal is calculated by dividing the cumulative error by a measure of dispersion, such as the mean absolute deviation (MAD) or the mean squared deviation (MSD). The result represents the number of standard deviations the forecast error deviates from the expected value.

Since the tracking signal is based on the cumulative error, the first value of the tracking signal is calculated using the initial forecasted value and the actual value. However, the first value cannot be zero because dividing the cumulative error by zero is mathematically undefined.

Therefore, zero cannot be the first value for a tracking signal. The tracking signal should have a non-zero value from the second calculation onward, as the initial forecasted value and actual value are required to compute the cumulative error.

Learn more about tracking signal here:

https://brainly.com/question/31928652

#SPJ11

what allows an organization to use software through the internet

Answers

The ability to use software through the internet is called Software as a Service (SaaS). SaaS is a type of cloud computing that allows businesses to access software applications that are hosted and managed by a third-party provider via the internet.

The main benefit of SaaS is that it eliminates the need for organizations to invest in expensive hardware and software infrastructure. Instead, they can simply pay a predictable, recurring fee to use the software they need, without worrying about maintenance, upgrades, or compatibility issues.

SaaS is particularly popular among small and medium-sized businesses, as it allows them to access enterprise-level software without having to invest in expensive IT infrastructure. It also allows businesses to easily scale up or down depending on their needs, and eliminates the need for IT staff to manage software applications on-premises.

Overall, SaaS is an increasingly popular way for organizations to access the software they need in a cost-effective and convenient manner, making it an attractive option for businesses of all sizes.

Know more about the Software as a Service (SaaS)

https://brainly.com/question/15908927

#SPJ11

How many numbers can be stored? How many digits does each number have? What base are the numbers stored in?

Answers

The number of numbers that can be stored and the number of digits in each number depend on the data type used for storage and the programming language you are working with. Here are some common data types and their storage capacities:

1. Integer data types: Integers are whole numbers without a fractional component. The storage capacity of integer data types varies depending on the programming language and the specific data type chosen. Common integer data types include:

  - In Java:

    - `byte`: 8 bits (range: -128 to 127)

    - `short`: 16 bits (range: -32,768 to 32,767)

    - `int`: 32 bits (range: -2,147,483,648 to 2,147,483,647)

    - `long`: 64 bits (range: -9,223,372,036,854,775,808 to 9,223,372,036,854,775,807)

  - In Python:

    - `int`: Unlimited precision (no predefined limit)

2. Floating-point data types: Floating-point numbers represent real numbers with a fractional component. The storage capacity of floating-point data types is also language-dependent. Common floating-point data types include:

  - In Java:

    - `float`: 32 bits (single precision)

    - `double`: 64 bits (double precision)

  - In Python:

    - `float`: Typically 64 bits (double precision)

The number of digits each number can have depends on the chosen data type and the base used for representation. In most programming languages, integers are typically stored in base 2 (binary) representation. Floating-point numbers are usually stored in base 2 as well, using a combination of sign, mantissa, and exponent.

For example, with a 32-bit integer data type in Java, the maximum value is 2,147,483,647, which has 10 digits. Similarly, with a `float` data type in Java, you have approximately 7 decimal digits of precision.

It's important to note that these capacities and representations may vary depending on the programming language and system architecture. It's recommended to refer to the documentation of the specific programming language and data types you are using for more precise information on storage capacities and number representations.

Visit here to learn more about binary brainly.com/question/28222245

#SPJ11

when citing the source of a direct quotation that you found on the web

Answers

When citing a direct quotation found on the web, include the author's name (if available), the title of the webpage or article in quotation marks, the website name, publication date or access date, and the URL.

When citing a direct quotation found on the web, it is important to provide proper attribution to the original source. Here is an explanation of the elements typically included in a citation:

Author's Name: If the author's name is available, include it in the citation. If there is no individual author, you can use the name of the organization or website responsible for the content.

Title of the Webpage or Article: Include the specific title of the webpage or article where the direct quotation is found. Enclose the title in quotation marks if it is a part of a larger work or italicize it if it is a standalone work.

Website Name: Provide the name of the website where the content is published or hosted. This helps in identifying the source and locating it.

Publication Date or Date Accessed: If available, include the publication or last updated date of the webpage. If the date is not provided, use the date when you accessed the information to indicate the retrieval date.

URL: Include the full URL (web address) of the webpage. This allows readers to access the original source directly.

The specific citation format and arrangement of these elements may vary depending on the citation style you are using. Common styles such as APA, MLA, or Chicago have specific guidelines for formatting citations. It's important to consult the appropriate style guide or consult your instructor's instructions for accurate and consistent citation practices.

Learn more about web here:

https://brainly.com/question/29554511

#SPJ11

using a virtualization program, you can create dozens of different VMs. T/F

Answers

True, using a virtualization program, it is possible to create dozens or even more different virtual machines (VMs). Virtualization technology enables the creation of multiple virtual instances of an operating system or environment on a single physical machine.

Virtualization programs, also known as hypervisors, allow users to run multiple operating systems or environments simultaneously on a single physical computer. These programs provide a layer of software that abstracts the underlying hardware, enabling the creation and management of virtual machines.

Each virtual machine created by the virtualization program behaves as an independent system with its own virtual hardware, operating system, and applications. Multiple VMs can coexist and run concurrently on the same physical machine, sharing its resources such as CPU, memory, storage, and network connectivity.

The number of VMs that can be created using a virtualization program depends on the capabilities and resources of the host machine. The physical machine's processing power, memory capacity, and storage capacity determine the number of VMs that can be effectively hosted.

Virtualization offers numerous benefits, such as improved resource utilization, isolation between VMs, simplified management, and increased flexibility. It is widely used in various scenarios, including server consolidation, software testing and development, sandbox environments, and cloud computing infrastructure.

By leveraging virtualization, organizations can optimize their infrastructure, reduce hardware costs, and enhance scalability. The ability to create dozens or more VMs allows for efficient utilization of resources, increased workload flexibility, and the ability to isolate and manage various operating systems and applications independently.

In summary, with a virtualization program, it is true that dozens or more different virtual machines can be created, enabling the simultaneous execution of multiple operating systems or environments on a single physical machine.

Learn more about virtualization here:

https://brainly.com/question/31257788

#SPJ11

the traits of the five-factor model of personality are thought to be

Answers

The five-factor model of personality consists of five broad traits: openness, conscientiousness, extraversion, agreeableness, and neuroticism.

The five-factor model (FFM) of personality is a widely accepted framework in psychology that attempts to capture the fundamental dimensions of human personality. The traits of the FFM are as follows:

1. Openness: This trait reflects a person's inclination towards imagination, creativity, and curiosity. Individuals high in openness are often open to new experiences, ideas, and unconventional thinking.

2. Conscientiousness: Conscientiousness refers to a person's level of organization, responsibility, and dependability. Individuals high in conscientiousness tend to be self-disciplined, goal-oriented, and reliable.

3. Extraversion: Extraversion represents a person's sociability, assertiveness, and preference for external stimulation. Extraverts are often outgoing, energetic, and seek social interactions.

4. Agreeableness: Agreeableness reflects an individual's tendency to be cooperative, empathetic, and compassionate towards others. People high in agreeableness are typically friendly, trusting, and value harmonious relationships.

5. Neuroticism: Neuroticism refers to emotional stability or instability. Individuals high in neuroticism may experience negative emotions more frequently and intensely. They may be prone to anxiety, depression, and mood swings.

These five traits provide a broad framework for understanding and describing individual differences in personality, and they are believed to be relatively stable throughout a person's life.

Learn more about five-factor model here:

https://brainly.com/question/30764211

#SPJ11

Which of the following features enable you to change the color of objects in your slide without changing text?
a) themes
b) insert
c) format variants
d) slide color

Answers

The feature that enables you to change the color of objects in your slide without changing text is "format variants."

The correct answer is option c) format variants.

Format variants allow you to modify the appearance of objects, such as shapes or images, on your slide without affecting the text. When you apply a format variant to an object, it changes the color scheme or style of the object while keeping the text unchanged. This feature is particularly useful when you want to create visual contrast or emphasize specific elements in your presentation.

Themes (option a) are predefined sets of colors, fonts, and effects that are applied to the entire presentation, including both objects and text. Insert (option b) refers to the action of adding new elements, such as images or shapes, to a slide. Slide color (option d) typically refers to the overall background color or design of a slide and does not specifically address changing the color of individual objects while preserving the text.

Learn more about background color here:

https://brainly.com/question/14928554

#SPJ11

Which of the following statements are True about Red-Black Trees? Select ALL the TRUE statements. A Red-Black Tree with all black nodes is also an AVL Tree. At least one child of every black node must be red. The longest path from the root is no more than twice the length of the shortest path. Every AVL tree can become a Red-Black Tree by simply coloring nodes (without rotations). Every Red-Black Tree is an AVL Tree. Every Red-Black Tree is a Binary Search Tree. The root node can be red. If a node is red, then its children are black

Answers

The True statements about Red-Black Trees are:

- At least one child of every black node must be red.

- The longest path from the root is no more than twice the length of the shortest path.

- Every Red-Black Tree is a Binary Search Tree.

- If a node is red, then its children are black.

Therefore, the True statements are:

- At least one child of every black node must be red.

- The longest path from the root is no more than twice the length of the shortest path.

- Every Red-Black Tree is a Binary Search Tree.

- If a node is red, then its children are black.

Visit here to learn more about node brainly.com/question/28485562

#SPJ11

You can insert ____ different kinds of pictures into PowerPoint.

Answers

The answer is You can insert various different kinds of pictures into PowerPoint.

When working with PowerPoint, you have several options for inserting different kinds of pictures into your presentation. Here are the common methods:

Inserting Pictures from Your Computer: PowerPoint allows you to insert pictures stored on your computer's hard drive or any connected storage devices.

Inserting Online Pictures: PowerPoint also enables you to search and insert pictures directly from online sources. In the "Insert" tab, click on the "Online Pictures" button.

Inserting Clip Art: PowerPoint provides a collection of clip art images that you can use in your presentation.

Inserting Icons: PowerPoint offers a wide range of icons that can be inserted into your presentation. Icons are useful for representing concepts, objects, or actions in a visually appealing manner. werPoint provides an extensive collection of shapes that can be customized and stylized to create unique visuals.

By using these methods, you can insert a variety of pictures, including photos, illustrations, clip art, icons, and customized shapes, into your PowerPoint presentation. This flexibility allows you to enhance your slides with visually appealing and relevant visuals.

Learn more about PowerPoint here:

https://brainly.com/question/32680228

#SPJ11

Design a 4-to-16-line decoder with enable using five 2-to-4-line decoder.

Answers

a 4-to-16-line decoder with enable can be constructed by combining five 2-to-4-line decoders. This cascading arrangement allows for the decoding of binary inputs into a corresponding output signal, controlled by the enable line. The circuit diagram illustrates the configuration of this decoder setup.

A 4-to-16-line decoder with enable can be created using five 2-to-4-line decoders. A 2-to-4-line decoder is a combinational circuit that transforms a binary input into a signal on one of four output lines.

The output lines are active when the input line corresponds to the binary code that is equivalent to the output line number. The enable line of the 4-to-16-line decoder is used to control the output signal. When the enable line is high, the output signal is produced, and when it is low, the output signal is not produced.

A 4-to-16-line decoder can be created by taking five 2-to-4-line decoders and cascading them as shown below:

Begin by using four of the 2-to-4-line decoders to create an 8-to-16-line decoder. This is done by cascading the outputs of two 2-to-4-line decoders to create one of the four outputs of the 8-to-16-line decoder.Use the fifth 2-to-4-line decoder to decode the two most significant bits (MSBs) of the binary input to determine which of the four outputs of the 8-to-16-line decoder is active.Finally, use an AND gate to combine the output of the fifth 2-to-4-line decoder with the enable line to control the output signal.

The circuit diagram of the 4-to-16-line decoder with enable using five 2-to-4-line decoders is shown below: Figure: 4-to-16-line decoder with enable using five 2-to-4-line decoders

Learn more about line decoder: brainly.com/question/29491706

#SPJ11

the component of the drum brake system attached to the backing plate is the

Answers

The component of the drum brake system that is attached to the backing plate is the "brake shoes."

In a drum brake system, the brake shoes are curved metal plates that are lined with friction material, often referred to as brake lining or brake pads. The brake shoes are mounted inside the brake drum, which is attached to the wheel hub.

When the brake pedal is pressed, hydraulic pressure is applied to the wheel cylinder, which in turn pushes the brake shoes outward against the inner surface of the brake drum. The friction between the brake shoes and the brake drum creates the braking force that slows down or stops the rotation of the wheel.

The brake shoes are typically held in place by various springs and levers, and they are designed to provide consistent contact with the brake drum for effective braking performance.

Over time, the friction material on the brake shoes wears down and needs to be replaced to maintain proper braking function.

learn more about function here:

https://brainly.com/question/30858768

#SPJ11

Other Questions
Suppose there's an appliance store that produces and sells air conditioners, it could set its price high and sell very few air conditioners, or it could set its price low and sell lots of air conditioners. The following table shows some possible choices this store could make for its annual production.Price Quantity Total RevenueChoice (Dollars per air conditioner) (Air conditioners per year) (Dollars per year) $800 0 $0 600 60 36,000C 400 120 48,000D 200 180 36,000E 0 240 0The following graph plots the firm's total revenue curve: that is, the relationship between quantity and total revenue given by the two right columns in the previous table. The five choices are also labeled. Finally, two black lines are shown; these lines are tangent to the green curve at points B and D.TOTAL REVENUE (Thousands of dollars per year)OUTPUT (A/C units sold per year)The slope of the total revenue curve is the firm's________The following diagram plots this firm's demand curve. Using the previous total revenue graph, calculate the slope of the lines tangent to the total revenue curve at points B and D. Based on this information, use the black line (X symbols) to plot the firm's marginal revenue (MR) curve on the graph. A series circuit contains an inductor, a resistor, and a capacitor for which L=H R-1002, and C -0.01F. The voltage E(t)= 10, 10, 0t5 t20 is applied to the circuit. Determine the instantaneous charge q(t) on the capacitor for t> 0 if g(0) = 0 and q'(0) - 0. Problem 2 Find the bilateral Laplace transfrom of the following signal: f(t)-, otherwise Problem 3 Consider the following discrete time system: az x(z) Y(z) a. Show that the difference equation model is Y[n] ay[n 1] = ax[n-1] b. Find the transfer function of the system. c. Find the inpulse response of the system. Problem 4 a. Find the Fourier transform of the following signal: x(t) = u(t) et sin 2.st b. Consider the following ode: dy(t) + 2y(t) = x(t), y(0) - 0 dt Using Fourier transform, find the transfer function of the system and compute the response to the input x(t) = eu(t). Use the Laplace transform to solve the following initial value problem: y" +25y = cos(3t) y(0) = 0, y (0) 0 First, using Y for the Laplace transform of y(t), i.e., Y = L{y(t)}, find the equation you get by taking the Laplace transform of the differential equation and solving for Y: Y(s) = Find the partial fraction decomposition of Y(s) and its inverse Laplace transform to find the solution of the IVP: y(t) = . Consider the initial value problem y"' + 4y = 12t, y(0) = 4, y(0) = 2. a. Take the Laplace transform of both sides of the given differential equation to create the corresponding algebraic equation. Denote the Laplace transform of y(t) by Y(s). Do not move any terms from one side of the equation to the other (until you get to part (b) below). =help (formulas) b. Solve your equation for Y(s). Y(s) = L{y(t)} c. Take the inverse Laplace transform of both sides of the previous equation to solve for y(t). y(t) which animals can produce urine that is more concentrated than their body fluids? You are applying Weighted Moving Average method to forecasting demand. You are considering increasing weight for the most recent demand data point (i.e., increasing wo). How will such change of weight affect demand forecast?Group of answer choices:Increasing w0 will not change demand forecast.In general, demand forecast will stay closer to average demand.In general, demand forecast will trail observed demand more closely.None of above is correct. Juniper Design Ltd. of Manchester, England, is a company specializing in providing design services to residential developers. Last year he company had net operating income of \( \$ 450,000 \) on sales During 2014, Paul Company discovered that the ending inventories reported on its financial statements were incorrect by the following amounts: 2012 $60,000 understated $75,000 overstated 2013 Paul uses the periodic inventory system. Prior to any adjustments for these errors and ignoring income taxes, Paul's retained earnings at December 31, 2014, would be: Select one: O a. Correct O b. $15,000 overstated Oc $75,000 overstated O d. $135,000 overstated O e $15,000 understated Draw and label a typical rotational slide in profile. Quandock plc is a trading company which makes all of its sales and purchases on credit terms. The company's financial statements for the year to 31 December 2017 (with the comparative figures for 2016) are shown below. [900 words] Sales revenue Cost of Sales Gross Profit Operating Expenses Profit before interest and tax Interest Profit before taxation Taxation Profit for the year Non-current Assets Property, plant and equipment Trade receivables Cast at bank and in hand Quandock Plc Statement of Profit and Loss 31 December 2017 Current Assets Inventories (2015: 670,000) TOTAL ASSETS Equity Ordinary shares Retained earnings Total Equity Non-current Liabilities Long-term loans Quandock Plc Statement of Financial Position 31 December 2017 Current Liabilities Trade payable Taxation (Accruals) TOTAL EQUITY & LIABILITIES 740 820 560 2017 ( '000) 5,000 (3,660) 1,340 (380) 960 (80) 880 870 250 2016 ( '000) 1,730 2,120 3,850 1,000 930 1,930 800 (250) 630 690 760 340 770 1,120 210 3,850 2016 ( '000) 4,550 (3,330) 1,220 (400) 820 (100) 720 (210) 510 2017 ( '000) 1,820 1,790 3,610 1,000 630 1,630 1,000 980 3,610 Required: Calculate a set of accounting ratios (for each of the two years) which may be used to judge the company's profitability, liquidity and efficiency. the theorist who proposed socioemotional selectivity theory was/is: Research proposalThe influence of effective leadership on the operations of public enterprises Analyze and sketch a graph of the function. Find any intercepts, relative extrema, points of inflection, and asymptotes. (If an answer does not exist, enter DNE.) Y-(x-6)5 intercepts (smaller x-value) (x, y) (larger x-value) relative minimum (x, y) - DNE relative maximum (x, y)- DNE point of inflection (x, y) - Find the equation of the asymptote. DNE Book Problem 39 Make the substitution u = e to express the integrand as a rational function with three linear factors in the denominator, one of which is u, and then evaluate the integral. -17e - 80 J dx = e2x + 9e + 20 +C. What pollution does oil and gas well drilling bring to the environment? Maltz Company estimates that unit sales will be 9,900 in quarter 1;12,200 in quarter 2;14,300 in quarter 3 ; and 18,900 in quarter 4. Management wants to have an ending finished goods inventory equal to 20% of the next quarter's expected unit sales. Prepare a production budget by quarters for the first six months of 2020 . BHP Billiton, an Australian company, just paid $0.85 as a dividend, which is expected to grow at 6.0 per cent. Its most recent stock price is $82. Further, the company has a debt issue outstanding with 23 years to maturity that is quoted at 95 per cent of face value. The issue makes semiannual payments and has an embedded cost of 6 per cent annually. It considers a debt-equity ratio of 0.60 and a 25 per cent corporate tax rate. In this year, the company has an EBIT of $3.15 million. Depreciation, the increase in net working capital, and capital spending were $265,000,$105,000, and $495,000, respectively. Therefore, you expect that over the next five years, EBIT will grow at 15 per cent per year, depreciation and capital spending will grow at 15 per cent per year, and NWC will grow at 10 per cent per year. It also has $19.5 million in debt and 400,000 shares outstanding. After Year-5, the adjusted cash flow from assets is expected to grow at 3.50 per cent indefinitely. Answer the following five (5) questions based on the above information and enter only the number as an answer, for example, 1234.56. Two (2) marks for each correct answer, a total of ten (10) marks.What is the cost of equity (%)?What is the cost of debt (%)?What is the WACC (%)?What is the value of the company value ($)?What is the price per share ($)? the kashaya pomo lived in what is now the state of The Rolling Department of Kraus Steel Company had 7,700 tons in beginning work in process inventory (70\% complete) on October 1. During October, 48,200 tons were completed. The ending work in process inventory on October 31 was 2,400 tons ( 60% complete).What are the total equivalent units for direct materials for October if materials are added at the beginning of the process? Journalizing Direct Materials and Direct Labor Transactions (Appendix). Hals Heating produces furnaces for commercial buildings.Direct materials and direct labor variances for the month of January are shown as follows.Materials price variance$(2,000) favorableMaterials quantity variance$ 800 unfavorableLabor rate variance$ 10,000 unfavorableLabor efficiency variance$(21,600) favorableRequired:The company purchased 1,000 elements during the month for $38 each. Assuming a standard price of $40 per element, make a journal entry to record the purchase of raw materials for the month.The company used 980 elements in production for the month, and the flexible budget shows the company expected to use 960 elements. Assuming a standard price of $40 per element, Make a journal entry to record the usage of raw materials in production for the month.The company used 10,000 direct labor hours during the month with an actual rate of $19 per hour. The flexible budget shows the company expected to use 11,200 direct labor hours at a standard rate of $18 per hour. Make a journal entry to record direct labor costs for the month. In Coastal Crop Ltd. Case (CCL), what changes would you make in health benefits as the union in order to save the company from relocating and regaining the contract? Assuming wages, hours of operations are settledAs is shown in Table 1, CCL provides a competitive compensation and benefits package. The average wage at CCL is $20.25 per hour. This compares to an average current wage of $19. 71 for the other firms. The benefits are co-paid (700/o company, 300/o employee). The benefits include dental plan, vision plan, life insurance coverage of two times base salary, medical insurance for hospitalization and prescription drugs, and a sick benefit plan (coverage up to 66.670/o percent of earnings for any absence due to illness, maximum 52 weeks). Current cost of the benefit plan to the employee is $750 per year; the company share is $1,750 per employee per year. In addition, CCL contributes an amount equivalent to 4 percent of each employee's earnings into a retirement fund that can be used by the employee in retirement.