The flask in which the molecules will have the greatest average velocity is Flask A which contains Carbon monoxide at 855 torrs and 5°C.
The correct option is A.
What is the effect of temperature and pressure on the average velocity of gases?The average velocity of gases is directly proportional to the pressure and temperature of gases.
This means that the greater the pressure of the gases, the greater will be the average velocity of the gases.
Also, the greater the temperature of the gases, the greater will be the average velocity of the gases.
Flask A contains gas at the highest pressure.
Learn more about the pressure and temperature of gases at: https://brainly.com/question/24719118
#SPJ1
What can be said about the differences between the two types of water?A. There are no differences between the two types of water. B. Tap water is more acidic than bottled water. C. Bottled water is more acidic than tap water, D. There is not enough information to determine a conclusion
The difference between in the two types of the water is the correct option is : C. Bottled water is more acidic than tap water
The Pure water has a pH of 7 and that is considered as the neutral because it is neither the acidic nor the basic qualities. The pH scale ranges from the 0 to 14 . Th epH value which is less then the 7 is considered as the acidic in nature. The pH value greater than the 7 is said to be basic in nature. The pH value of the 7 is the neutral value it means the water is neither the acidic nor the basic.
Thus, Bottled water is more acidic than tap water and the tap water is safer than the bottled water.
To learn more about the water here
https://brainly.com/question/1917701
#SPJ4
consider polonium metal, the only metal under to exhibit the simple cubic crystal structure at stp conditions. what is the maximum diameter of sphere, in pm, that would fit perfectly within the interstitial space (empty space) in the middle of the simple cubic unit cell? the atomic radius of polonium is 190 pm (picometers).
The maximum diameter of a sphere polonium metal that would fit perfectly within the interstitial space of a simple cubic unit cell can be calculated as the distance between two opposite corners of the unit cell, which is equal to the edge length of the unit cell. The edge length of the simple cubic unit cell can be calculated as follows:
Edge length = 2 * atomic radiusEdge length = 2 * 190 pm = 380 pmTherefore, the maximum diameter of the sphere polonium metal that would fit perfectly within the interstitial space of the simple cubic unit cell of polonium is 380 pm.
About Polonium MetalPolonium Metal was used in nuclear experiments with elements such as beryllium which release neutrons when bombarded by alpha particles. In printing and photographic equipment, polonium is used in devices that ionize air to dissipate electrostatic charge buildup.
Learn More About Polonium Metal at https://brainly.com/question/7191204
#SPJ4
how many joules of energy must be removed from 126 g of water at 24oc to form ice at –15oc?
The answer is 153.7 kJ.1 g of water requires 100 calories to heat from its freezing point of 0 C to its boiling temperature of 100 C.
The latent heat of vaporization is what is causing this. To raise the temperature of 40 grams of water by 50 degrees, we must figure out how much heat is being absorbed. Mg delta is equivalent to Celsius. 40 grams of mass is equal to 1 into 50 points, which equals 2000 calories or 478.5 joules. Latent heat of vaporization is the amount of heat required to vaporize water into steam. As a result, the steam at 100°C contains greater heat.
Find the amount of heat needed to change 100.
100 C vapor to 0 C water
q \s4 \s= \sm \s⋅ \sΔ \sH \sv \s= \s50.0 \sg \s⋅ \s2257 \sJ \sg \s= \s112850 \sJ
5. Calculate the amount of heat needed to transform 100 C of vapor into 120 C of vapor:
q \s5 \s= \sm \s⋅ \sc \sv \sa \sp \so \sr \s⋅ \sΔ \sT \s= \s50.0 \sg \s⋅ \s2.09 \sJ \sg \s⋅ \s∘ \sC \s⋅ \s( \s120 \s∘ \sC \s− \s100 \s∘ \sC \s) \s= \s2090 \sJ
Consequently, the total heat needed is
q \sT \sO \sT \sA \sL \s= \sq \s1 \s+ \sq \s2 \s+ \sq \s3 \s+ \sq \s4 \s+ \sq \s5 \s= \s152696.5 \sJ \s= \s153.7 \sk \sJ
Learn more about vaporization here-
https://brainly.com/question/24096079
#SPJ4
soda has a ph of about 3, while black coffee has a ph of about 5. how much more acidic is soda than coffee?
The soda with a pH of 3 is 100 times more acidic than the coffee with a pH of 5
How do I know how much acidic is soda than coffee?To determine how much acidic is soda than coffee, we shall obtain the hydrogen ion concentration [H⁺] of each liquid. Details below:
For soda:
pH of soda = 3 Hydrogen ion concentration [H⁺] = ?pH = -Log [H⁺]
3 = -Log [H⁺]
Multiply through by -1
-3 = Log [H⁺]
Take the anti-log of -3
[H⁺] = Anti-log -3
[H⁺] = 0.001 M
For coffee:
pH of coffee = 5 Hydrogen ion concentration [H⁺] = ?pH = -Log [H⁺]
5 = -Log [H⁺]
Multiply through by -1
-5 = Log [H⁺]
Take the anti-log of -5
[H⁺] = Anti-log -5
[H⁺] = 0.00001 M
Finally, we shall determine how much acidic is soda than coffee. Detais below:
Hydrogen ion concentration for soda = 0.001 MHydrogen ion concentration for coffee = 0.00001 M[H⁺] for soda / [H⁺] for coffee = 0.001 / 0.00001
[H⁺] for soda / [H⁺] for coffee = 100
Cross multiply
[H⁺] for soda = 100 × [H⁺] for coffee
Thus, we can conclude that the soda is 100 times more acidic
Learn more about acidic solution:
https://brainly.com/question/16926229
#SPJ1
earth's first atmosphere (some 4.6 billion years ago) was probably composed of . a. hydrogen, helium, methane, and ammonia b. the same gas mix as seen in our present atmosphere c. nitrogen, carbon dioxide, and water vapor d. mostly argon and nitrogen
Earth's first atmosphere some 4.6 billion years ago was probably composed of hydrogen ,helium ,methane and ammonia.
Because these were the primary gases in the dusty, gassy disk around the Sun from which the planets were formed, it is likely that hydrogen and helium comprised Earth's initial atmosphere. The atmosphere and the Earth were extremely hot.
When heated, hydrogen and helium molecules move very quickly. In fact, they moved so quickly that they eventually drifted away from Earth and into space.
Scientists believe that Earth collided with a planet the size of Mars about 4.5 billion years ago. Our Moon was created as a result of this catastrophic collision, and the entire planet melted as a result of the energy from the collision.
To learn more about the atmosphere
https://brainly.com/question/13154099
#SPJ4
ozone is made up of ----- oxygens and is formed when ---- question 2 options: two, oxygen gas reacts with sunlight and mechanical discharges in the atmosphere three, oxygen gas reacts with sunlight and electrical discharges in the atmosphere. two, nitrogen gas reacts with uv light and electrical discharges in the atmosphere. three, oxygen gas reacts with uv light and mechanical discharges in the cryosphere.
Ozone is made up of three oxygens and is formed when two, oxygen gas reacts with sunlight and electrical discharges in the atmosphere.
Ozone is an important component of the Earth's atmosphere as it helps to protect us from the harmful ultraviolet (UV) radiation from the Sun. It is formed when oxygen molecules in the atmosphere are split apart by UV radiation, resulting in two oxygen atoms that then combine with an oxygen molecule to form ozone. This process is known as photochemical smog and occurs mainly in the lower atmosphere. Ozone is also formed in the upper atmosphere from electrical discharges from lightning, and from chemical reactions between nitrogen oxides and hydrocarbons.
Learn more about Ozone:
https://brainly.com/question/5019112
#SPJ4
(b) In another experiment Penny obtained white crystals of potassium carbonate, K,CO₂,
from
(1) Show that the percentage by mass of potassium in K₂CO3 is 56.6.
[2]
(ii) Some of Penny's crystals were analysed for potassium by flame emission
spectroscopy. The results showed that the percentage of potassium present was
44.9%.
Penny suggested that the crystals of potassium carbonate might be a hydrate,
K₂CO3.2H₂O.
Explain why the percentage of potassium in the hydrate is lower than the value
[1]
stated in (1).
Answer:
(b) (i) To determine the percentage by mass of potassium in K₂CO3, we can use the molar masses of the individual elements in the compound. The molar mass of K₂CO₃ is 138.21 g/mol. The molar mass of potassium is 39.098 g/mol and the molar mass of carbon and oxygen is 12.01 and 16.00 respectively.
The mass of potassium in K₂CO₃ is 2*39.098 = 78.196 g
The mass of K₂CO₃ is 138.21 g
percentage of potassium in K₂CO₃ = (mass of potassium / mass of K₂CO₃) * 100 = (78.196 / 138.21) * 100 = 56.6%
(b) (ii) If the crystals of potassium carbonate are a hydrate, K₂CO₃.2H₂O, it means that there is water molecules present in the crystal structure. The mass of water in the hydrate will not contribute to the percentage of potassium in the hydrate. Therefore, the percentage of potassium in the hydrate will be lower than the value stated in (1)
how many electrons are required to reduce cytochrome c
Four electrons are required to reduce cytochrome c.
Cytochrome c is a small, heme-containing protein that plays an important role in the process of cellular respiration. In cellular respiration, electrons are transferred from molecules of fuel, such as glucose, to oxygen, with the help of cytochrome c and other proteins.
Cytochrome c acts as an electron carrier, transferring electrons from one protein to another in a series of redox (reduction-oxidation) reactions. In each redox reaction, electrons are removed from one molecule (the oxidized form) and added to another molecule (the reduced form). In the case of cytochrome c, it must be reduced four times, meaning that it must accept four electrons in total.
Each electron that is added to cytochrome c changes the oxidation state of the iron atom in its heme group, reducing it from the oxidized form (Fe3+) to the reduced form (Fe2+). This process allows cytochrome c to transfer electrons from one protein to another, until they eventually reach oxygen and are used to form water.
To learn more about electrons, visit:
https://brainly.com/question/1255220#
#SPJ11
An object with a mass of 1609 kg is accelerating at a rate 32 m/s when a net force that is acting on the object
The net force acting on an object with a mass of 1609 kg is accelerating at a rate 32 m/s² is 51488 N
What is a net force?The vector sum of the forces exerted on a particle or object is known as the net force. The original forces' impact on the motion of the particle is replaced by the net force, which is a single force.
For an object at rest or moving in constant motion, there is no net force acting on the object.
However, a net force acts on an object when it is accelerating.
The net force acting on an object with a mass of 1609 kg is calculated below:
Net force = mass * acceleration
Net force - 1609 * 32
Net force = 51488 N.
Learn more about net force at: https://brainly.com/question/12970081
#SPJ1
a liter of water was found to contain 10 mg of benzene (c6h6). what is the concentration of benzene in molarity (m)?
The concentration of benzene in molarity (M) is calculated by dividing the amount of benzene (10 mg) by its molar mass (78.11 g/mol). This gives a concentration of 0.128 M.
To calculate the concentration of benzene in molarity (M), you need to divide the amount of benzene (10 mg) by its molar mass (78.11 g/mol). This gives the concentration of benzene as 0.128 M. The molar mass of a substance is the mass of one mole of the substance, which is equal to Avogadro's number of molecules of the substance.
In this case, one mole of benzene is equal to 78.11 g, and 10 mg of benzene is equal to 0.128 moles. Therefore, dividing 10 mg by 78.11 g/mol gives 0.128 moles, which is equal to 0.128 M.
Learn more about The concentration of benzene:
https://brainly.com/question/22016139
#SPJ4
Please help with this question. I really do not know how to do it?
Answer:
Explanation:
Oh, let me rephrase it:
How much copper sulfate (salt) would you expect in comparison AlSO4 if you had mixed copper instead of aluminium with sulfuric acid?
Just answer like: I would expect more/less than when adding aluminum.
1. The volume of blood plasma in adults is 3.1 L The density of blood plasma is 1.03 g/cc: How many pounds of blood plasma are there in the average adult body? (Hint: You can use the density of as a conversion factor once You convert to units of volume).
The average adult body has 3.1 litres of blood plasma with a density of 1.03 g/cc.
What is blood plasma?About 55% of the total volume of blood in a human being is made up of blood plasma, a yellowish fluid.
How do you determine it?We must multiply the volume by the density to determine the weight of the blood plasma in pounds before converting the result.
The volume is first converted from litres to cubic centimetres as follows: 1,000 ml/liter times 3.1 litres equals 3,100 cc.
The weight in grammes is then calculated by dividing the volume in cc by the density in g/cc: 3,100 cc times 1.03 g/cc equals 3,193 g.
The weight in grammes is then converted to pounds as follows: 4,54 g/lb / 3,193 g = 7.01 lb.
As a result, the average adult's body has about 7.01 pounds of blood plasma.
To know more about blood plasma, visit:
https://brainly.com/question/29829538
#SPJ4
the aqueous aluminum sulfate formed is crystalized to make hydrated aluminum sulfate, Al2(SO4)3xH2O.
the relative formula mass of hydrated aluminum sulfate is 666.
calculate the value of x in the given formula.
(pls solve w explanation)
In the crystalized form of aluminum sulfate, Al₂(SO₄)₃xH₂O, the value of x which represents the molecules of water is approximately 6.
How to find water per sulfate?The formula mass of Al₂(SO₄)₃ can be calculated as follows:
Al = 2 x 26.98 = 53.96 g/mol
S = 3 x 32.06 = 96.18 g/mol
O = 12 x 16.00 = 192.00 g/mol
Total formula mass = 53.96 + 96.18 + 192.00 = 342.14 g/mol
The relative formula mass of hydrated aluminum sulfate is 666, so the mass of water in the formula can be calculated as:
mass of water = 666 - 342.14 = 323.86 g/mol
Since the formula for water is H₂O, the number of water molecules in the formula can be calculated as:
number of H₂O molecules = 323.86/18.02 = 17.92
Since there are 3 sulfate ions in the formula, the number of water molecules per sulfate ion can be calculated as:
number of H₂O per sulfate = 17.92/3 = 5.97
Therefore, the value of x in the formula Al₂(SO₄)₃xH₂O is 6 (rounded up).
Learn more on number of molecules here: https://brainly.com/question/15379971
#SPJ1
which types of catalysis can increase the rate of a chemical reaction? [select all that apply]group of answer choicesnuclearhomogeneouselectrolyticheterogeneousenzymaticintramolecular
The type of catalysis that can increase the rate of chemical reactions is homogenous electrolytic.
What is catalysis?A catalyst is a compound that can affect the speed of a reaction. However, after the reaction takes place or is completed, the substance can return to its original form in the same or a fixed amount. So that
A homogenous electrolytic is a type of catalyst that functions to accelerate chemical reactions.
A catalyst is a substance that speeds up a reaction without undergoing a chemical change, by lowering the activation energy (Ea). In addition to accelerating, the catalyst can also slow down the reaction rate which is then called the term inhibitor.
Learn more about the type of catalysis that can use amino acids here ;
https://brainly.com/question/29110280
#SPJ4
which of the following is not major peak in the ms of isopentanea-43b-72c-60d-29e-57
The option (a), is not the major peak in the ms of isopentane
Isopentane, also called methylbutane or 2-methylbutane, is branched-chain saturated hydrocarbon (an alkane) with five carbon atoms, with formula C5H12 or CH(CH3)2(C2H5). Isopentane is extremely volatile and extremely flammable liquid at room temperature and pressure.
Isopentane is a colorless liquid with an alcohol or gasoline-like odor. It is used as a solvent, and as blowing agent in making plastics.
The most intense peak in the mass spectrum is the base peak & is given the value of 100 & intensities of other peaks are expressed relative to this. The base peak in most of the cases is due to molecular ion and is helpful in determining the molecular weight of the compound
The difference between isopentane and neopentane structure is that isopentane consists of four-membered carbon chain with single methyl group that was attached to this chain at second carbon atom. On other hand, neopentane contains four methyl groups attached to carbon atom at centre
learn more about isopentane at
https://brainly.com/question/4983710
#SPJ4
An exce of Al and 6. 0 mom of Br2 are reacted according to the equation How many mole of AlBr3 will be formed auming 100% yield
An excess of Al and 6. 0 mol of Br₂ are reacted according to the equation. There would be 4 moles of AlBr₃ will be formed asuming 100% yield.
First we should write the equation for the reaction between Al and Br₂ is:
2Al + 3Br₂⇒ 2AlBr₃
The reactant has excess aluminum so bromine would be the limiting reagent.
From the equation we know that 2 moles of aluminum reacted with 3 moles of bromine produce 2 moles of AlBr₃. so with unitary method we can calculate the moles of AlBr₃.
Moles AlBr₃ = 2/3 x moles Br
Moles AlBr₃ = 2/3 x 6. 0 moles
Moles AlBr₃ = 4 moles.
Learn more about moles at https://brainly.com/question/30293904
#SPJ4
Below are the balanced equations for the reactions in
Parts 1–3. Review the results of your experiments and look closely over the mole ratios of the chemical reactions. Do your experiments reflect the stoichiometric, molar amounts indicated by the reactions? Discuss this using the evidence from your experiments.
Cu(NO3)2 (aq) + 2NaOH(aq) —> Cu(OH)2 (s) + 2NaNO3 (aq) Note: Cu(OH)2 is a blue precipitate.
FeSO4 (aq) + 2NaOH(aq) —> Fe(OH)2 (s) + Na2SO4 (aq) Note: Fe(OH)2 is a dark green precipitate.
Fe(NO3)3 (aq) + 3NaOH(aq) —> Fe(OH)3 (s) + 3NaNO3 (aq)
Note: Fe(OH)3 is a red-
orange precipitate.
The reactants in the aqueous solutions gave rise to a precipitate.
What are the precipitates?We have to note that when we have two reactants that are in the aqueous states and then the reaction of the two substances that are in the aqueous state would lead us to the formation of a solid product, we can say that there have been the formation of a precipitate.
In this case we can see that experiments all led to the formation of the precipitates and that the stoichiometric of the precipitates agrees with the reaction.
Learn more about stoichiometric:https://brainly.com/question/29775083
#SPJ1
If the AGº for ATP hydrolysis is -30 kJ/mol and the AG" for phosphoenolpyruvate hydrolysis is -62 kJ/mol, what is the AGº for the phosphorylation of ADP by phosphoenolpyruvate? -92 kJ/mol +31 kJ/mol +92 kJ/mol -62 kJ/mol -32 kJ/mol
The AGº for the phosphorylation of ADP by phosphoenolpyruvate is equal to 32 kJ/mol.
The AGº for the phosphorylation of ADP by phosphoenolpyruvate can be calculated using the equation:
AGº = AGº (ATP hydrolysis) - AGº (phosphoenolpyruvate hydrolysis)
Given that AGº (ATP hydrolysis) = -30 kJ/mol and AGº (phosphoenolpyruvate hydrolysis) = -62 kJ/mol, then:
AGº = -30 kJ/mol - (-62 kJ/mol) = 32 kJ/mol
NADH: An increase in the concentration of NADH can inhibit PDH, as it competes with pyruvate for binding to the active site of the enzyme.
Acetyl-CoA: An increase in the concentration of acetyl-CoA can also inhibit PDH, as it acts as an allosteric inhibitor
Therefore, the AGº for the phosphorylation of ADP by phosphoenolpyruvate is equal to 32 kJ/mol.
Learn more about concentration here
https://brainly.com/question/10725862
#SPJ4
how many grams are in 4.9 moles of KCI
360 grams
365.54 grams
15.22 grams
0.066 grams
The mass of the compound that we have is 365.54 grams. Option B
What is the mole?The mole (mol) is the SI unit for measuring the amount of a substance in chemistry.
The mole is used to convert between mass, moles, and number of entities, allowing chemists to work with the macroscopic amounts of substances they need to, while still having a convenient way of expressing their composition at the molecular level.
Now we know that;
Molar mass of KCl = 75 g/mol
Mass of the compound = 4.9 moles * 74.5 g/mol
= 365.54 grams
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
The solubility of CuCl2(s) would ______ with increasing solvent temperature.
CuCl2(s) would be more soluble as the solvent temperature rose.
What happens to a solid substance's solubility when the temperature rises?The average kinetic of the solutes increases along with the solution's temperature. As a result, the molecules have a lower ability to bind together and dissolve more easily. Therefore, when temperature rises, solid states become more soluble.
Do temperature fluctuations affect solubility?Temperature affects a given solute's potential to dissolve in some kind of a particular solvent. The permeability of liquids and particles rises with temperature. Similar to liquids, gases become less soluble as temperature rises.Dissolution rate of the solute will consequently increase as temperature rises.
To know more about solubility visit:
https://brainly.com/question/28170449
#SPJ4
a balloon with a volume of 8.73 l contains 0.321 moles of helium gas. what is the density of the gas?
The density of the helium gas is: 0.147 g/l
What is density?
It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
The formulas and the procedures we will use are:
d = m/vn = m / MWWhere:
v= volumed= densitym= massn = molesMW = molecular weightInformation about the problem:
n= 0.321 molMW(he) = 4.003 g/molm = ?v = 8.73 ld = ?Applying the mole(n) formula and clearing the mass we get:
m(he) = 0.321 mol * 4.003 g/mol
n(he) = 1.284 g
Applying the density formula we get:
d = m /v
d = 1.284 g/8.73 l
d = 0.147 g/l
Learn more about density in: brainly.com/question/1354972
#SPJ4
Which one of the solution is more diluted 2M or 3M
2M is more preferable and acceptable
a volume of 70.0 ml of aqueous potassium hydroxide ( koh ) was titrated against a standard solution of sulfuric acid ( h2so4 ). what was the molarity of the koh solution if 20.7 ml of 1.50 m h2so4 was needed? the equation is
The molarity of the KOH solution if 20.7 ml of 1.50 m H₂SO₄ was needed is 0.04347 M
Let's think about how KOH and H₂SO₄ neutralize one another.
2 KOH + H₂SO₄ → K₂SO₄ + 2 H₂O
12.7 mL of 1.50 M H₂SO₄ react. The reacting moles of H₂SO₄ are:
0.0027 L × 1.50 mole/L = 0.03105 mole
KOH and H₂SO₂ have a molar ratio of 2:1. so,
2 x 0.03105 mole = 0.0621 mole are the reactive moles of KOH.
Then we can calculate the molarity of KOH
molarity = moles x volume
Molarity KOH = 0.0621 mole x 70.0 ml = 0.04347 M
Therefore, The molarity needed is 0.04347 M
Learn more about molarity at https://brainly.com/question/13750931
#SPJ4
Which of the following are accurate methods for measuring the stated volumes? Select all that apply. Using a P200 to measure 2 ul Using a 250 ml cylinder to measure 200 ml Using a 100 ml beaker to measure 60 ml Using a P1000 to measure 680 ul Using a 50 ml conical tube to measure 50 ml
We can measure the stated volumes using:
1) 250 ml cylinder to measure 200 ml
2) 100 ml beaker to measure 60 ml
3) P1000 to measure 680 μl
4) 50 ml conical tube to measure 50 ml.
A micropipette is a common yet essential laboratory instrument used to accurately and precisely transfer volumes of liquid in the microliter. Displacement of Air Utilizing the air displacement concept, a micropipette operates.
It consists of a piston that draws and releases liquid in response to the air pocket rising and falling, respectively. The Micropipette's internal workings are not in direct contact with the sample.
P1000, P200, and P20 are the sizes of the micropipettes and have a range of volumes measured are 100 - 1000 μl, 20 - 200 μl, and 0.5 - 20 μl.
Hence, the P1000 micropipette can measure 680 μl, but P200 cannot measure 2 μl accurately.
Learn more about micropipette here: https://brainly.com/question/28425080
#SPJ4
a solution is prepared by combining 5.00 ml of 4.8x10-4 m nascn solution, 2.00 ml of 0.21 m fe(no3)3 solution and 13.00 ml of 0.3 m hno3. calculate the analytical concentrations of scn-. group of answer choices
The analytical concentration of SCN⁻ in the solution is 1.47 x 10⁻⁴ M.
The final concentration of the negatively charged ion SCN⁻ in the solution can be calculated by using the equation of dilution formula, which states that the product of the initial concentration (C1) and volume (V1) of the first solute added, plus the product of the initial concentration (C2) and volume (V2) of the second solute added, is equal to the product of the final concentration (C3) and the total volume (V3) of the solution.
C1V1 + C2V2 = C3V3
Where:
C1 = initial concentration of NaSCN (4.8 x 10^-4 M)
V1 = volume of NaSCN (5.00 mL)
C2 = initial concentration of Fe(NO3)3 (0.21 M)
V2 = volume of Fe(NO₃)₃ (2.00 mL)
C3 = final concentration of SCN⁻
V3 = total volume of solution (5.00 mL + 2.00 mL + 13.00 mL = 20.00 mL)
Rearranging the equation:
C3 = (C1V1 + C2V2) / V3
C3 = (4.8 x 10⁻⁴ M × 5.00 mL + 0.21 M × 2.00 mL) / 20.00 mL
C3 = 1.47 x 10⁻⁴ M
So, the analytical concentration of SCN⁻ in the solution is 1.47 x 10⁻⁴ M.
To learn more about dilution formula visit: https://brainly.com/question/7208939
#SPJ4
Sodium reacts violently in chlorine gas to form sodium chloride. If 2.5 mol of Na and 1.1 mol of Cl2 are placed in a flask and allowed to react, how much sodium chloride could be formed?2Na + Cl2→ 2NaClA) 2.5 mol because the amount of product is determined by the limiting reactant, sodiumB) 3.6 mol because the moles of reactants must equal the moles of productsC) 2.4 mol because 2 mol NaCl form for each 3 mol of reactants that reactD) 2.2 mol because the amount of product is determined by the limiting reactant, chloride
If the 2.5 mole of Na and 1.1 mol of Cl₂ .The sodium chloride could be formed is D) 2.2 mol because the amount of product is determined by the limiting reactant, chloride.
The balanced equation is :
2Na + Cl₂ -----> 2NaCl
The moles of the Na = 2.5 mol
The moles of the Cl₂ = 1.1 mol
1 mole of the Cl₂ react with the 2 moles of the Na
The moles of the Na = 2 × 1.1
The moles of the Na = 2.2 mol
Thus, the Cl₂ is the limiting reactant.
The mole of the NaCl = 2 × 1.1
The mole of the NaCl = 2.2 mol.
To learn more about moles here
https://brainly.com/question/13109473
#SPJ4
what molecules allosterically downregulate pyruvate dehydrogenase
Pyruvate dehydrogenase (PDH) is allosterically downregulated by a number of molecules.
NADH: An increase in the concentration of NADH can inhibit PDH, as it competes with pyruvate for binding to the active site of the enzyme.
Acetyl-CoA: An increase in the concentration of acetyl-CoA can also inhibit PDH, as it acts as an allosteric inhibitor.
ATP: An increase in the concentration of ATP can also downregulate PDH, as ATP acts as an allosteric inhibitor.
Phosphorylation of the PDH complex by kinases, such as PDK1, can also lead to its inactivation and downregulation.
These molecules act to reduce the activity of PDH by altering its shape or interfering with substrate binding, thus reducing the rate of pyruvate molecules oxidation and promoting anaerobic metabolism.
Learn more about molecules here
https://brainly.com/question/19922822
#SPJ4
suppose you found out that i = 3.11 for some unknown acid. what could you conclude about the dissociation of the acid? how many hydrogen atoms can dissociate from the acid?
With a pKa of 3.11, the unidentified acid is partially dissociated in solution, which means that some of the hydrogen atoms in the solution are no longer bound to the acid.
the molecule's atoms have split apart to create hydrogen ions (H+) and the matching anion. There are 0.0498 moles of hydrogen ions that have dissociated. The strength of an acid in solution is determined by the ionization constant (pKa). The strength of the acid increases with decreasing pKa, which means that it dissociates more easily and generates more hydrogen ions (H+) in solution. A greater pKa value, on the other hand, indicates that the acid is weaker and less likely to dissociate.
Learn more about hydrogen here-
https://brainly.com/question/28937951
#SPJ4
which of the following is a set of allotropes of the same element? select all that apply 1. graphite, tungsten carbide 2. water, ice 3. no, no2, n2o 4. o2, o3 5. aluminum, aluminum oxide
O₂ and O₃ are allotropes of the same element.
There are a number of different allotropes of oxygen that have been discovered. The most common form is molecular oxygen which is also known as dioxygen and triplet oxygen.
It is found in substantial quantities in the atmosphere of our planet. The extremely reactive ozone is still another factor (O₃). Naturally, it only lasts for a very little period of time on the surface of the earth.
The presence of a significant amount of UV radiation produces an atmosphere in low Earth orbit that contains 96% of the oxygen in its atomic form. This atmosphere exists in outer space.
Want to know more about allotropes visit the link which is given below;
https://brainly.com/question/28294770
#SPJ4
the formula mass of a compound is 108 g/ mole, what is the mass for 1.00 mole of this compound? g ( only input a number as your answer)
If the formula mass of a compound is 108 g/mole, then the mass of 1.00 mole of this compound will be 108 g.
The mass of a compound can be determined by its formula mass and tnumberunt of moles of the compound. For example, if the formula mass of a compound is 108 g/mole, then the mass of 1.00 mole of this compound will be 108 g/mole x 1.00 mole, which equals 108 g. This means that for 1.00 mole of this compound, the mass will be 108 g.
To determine the mass for a different quantity of moles, simply multiply the formula mass by the number of moles.
For example, if the number of moles was 2.00, the mass of the compound would be 108 g/mole×2.00 moles, which equals 216 g. Similarly, if the number of moles was 0.50, the mass of the compound would be 108 g/mole×0.50 moles, which equals 54 g.
Therefore, the mass of a compound can be determined by its formula mass and the number of moles of the compound. For example, if the formula mass of a compound is 108 g/mole, then the mass of 1.00 mole of this compound will be 108 g.
Learn more about molar mass:
https://brainly.com/question/21334167
#SPJ4
