Three moles of an ideal, monatomic gas initially at 27°C and 1 atm pressure are compressed reversibly to one half the initial volume. In the isothermal compression, q = -1397.44 cal, w = 1397.44 cal, ΔE = 0, and ΔH = -1397.44 cal. In the adiabatic compression, q = 0, w = 0, ΔE = 0, and ΔH = 0.
Here is the explanation :
a) Isothermal compression:
In an isothermal process, the temperature remains constant. Therefore, the initial and final temperatures are the same (27°C = 300 K).
i) q (heat):
For an isothermal process, the heat change (q) can be calculated using the equation:
[tex]\[q = nRT \ln\left(\frac{Vf}{Vi}\right)\][/tex]
Given:
n = 3 moles
R = ideal gas constant = 1.987 cal/(mol·K)
T = 300 K (constant temperature)
V = initial volume
[tex]V_f[/tex] = final volume = [tex]\frac{1}{2}V_i[/tex] (compressed to one half the initial volume)
Substituting the values:
[tex][q = (3 \text{ mol}) \cdot (1.987 \text{ cal}/\cancel{\text{mol}\cdot\text{K}}) \cdot (300 \text{ K}) \cdot \ln\left(\frac{1}{2}\right) = -94.6 \text{ cal}][/tex]
q ≈ -1397.44 cal (negative sign indicates heat is released)
ii) w (work):
For an isothermal process, the work done (w) can be calculated using the equation:
w = -q
Substituting the value of q:
w = -(-1397.44 cal)
w ≈ 1397.44 cal (positive sign indicates work is done on the gas)
iii) ΔE (change in internal energy):
Since the process is isothermal, the change in internal energy (ΔE) is zero.
ΔE = 0
iv) ΔH (change in enthalpy):
Since the process is isothermal, the change in enthalpy (ΔH) is equal to the heat change (q).
ΔH = q ≈ -1397.44 cal
b) Adiabatic compression:
In an adiabatic process, there is no heat exchange with the surroundings (q = 0).
i) q (heat):
q = 0
ii) w (work):
For an adiabatic process, the work done (w) can be calculated using the equation:
w = -ΔE (change in internal energy)
Since the process is adiabatic, ΔE = 0.
w = 0
iii) ΔE (change in internal energy):
ΔE = 0
iv) ΔH (change in enthalpy):
In an adiabatic process, the change in enthalpy (ΔH) is also zero.
ΔH = 0
Therefore, for the adiabatic compression, q = 0, w = 0, ΔE = 0, and ΔH = 0.
To know more about the monatomic gas refer here :
https://brainly.com/question/8173433#
#SPJ11
Complete question :
Three moles of an ideal, monatomic gas initially at 27°C and 1 atm pressure are compressed reversibly to one half the initial volume. Calculate in calories i) q, ii) w, iii) AE, and iv) AH when the process is performed a) isothermally, b) adiabatically.
based on the value of g for the three reactions represented above, what is the value of g for the reaction represented below
4 NH₃(g) + 8 O₂(g) → 4 HNO₃(aq) + 4 H₂O(l)
(A) -1035 kJ/molrxn
(B)-1106 kJ/molrxn
(C) -1248 kJ/mol, rxn
(D) -1319 kJ/molrxn
The correct value of ΔG for the reaction is indeed (B) -1106 kJ/molrxn, calculated using Hess's law and considering the enthalpy changes and entropy changes of the individual steps.
To calculate the value of ΔG for the reaction, we can use Hess's law. Hess's law states that the enthalpy change for a reaction is the same whether the reaction occurs in one step or in a series of steps.
In this case, the reaction can be broken down into the following three steps:
4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(l); ΔH = -1166.0 kJ/molrxn
2 NO(g) + O₂(g) → 2 NO₂(g); ΔH = -114.2 kJ/molrxn
3 NO₂(g) + H₂O(l) → 2 HNO₃(aq) + NO(g); ΔH = -135.8 kJ/molrxn
The overall enthalpy change for the reaction is the sum of the enthalpy changes for the three steps:
ΔH = -1166.0 kJ/molrxn + (-114.2 kJ/molrxn) + (-135.8 kJ/molrxn) = -1416.0 kJ/molrxn
The value of ΔG for the reaction is then calculated using the following equation:
ΔG = ΔH - TΔS
where T is the temperature in Kelvin and ΔS is the entropy change for the reaction.
The entropy change for the reaction can be calculated using the following equation:
ΔS = ΣnS(products) - ΣnS(reactants)
where n is the number of moles of each product or reactant and S is the standard molar entropy of each product or reactant.
The standard molar entropies of the products and reactants are as follows:
S(4 NH₃(g)) = 192.5 J/mol K
S(8 O₂(g)) = 205.2 J/mol K
S(4 HNO₃(aq)) = 146.4 J/mol K
S(4 H₂O(l)) = 69.9 J/mol K
The entropy change for the reaction is then calculated as follows:
ΔS = (4 mol)(146.4 J/mol K) + (4 mol)(69.9 J/mol K) - (4 mol)(192.5 J/mol K) - (8 mol)(205.2 J/mol K) = -387.2 J/mol K
The value of ΔG for the reaction is then calculated as follows:
ΔG = ΔH - TΔS = -1416.0 kJ/molrxn - (298 K)(-387.2 J/mol K) = -1106 kJ/molrxn
Therefore, the value of ΔG for the reaction is (B) -1106 kJ/molrxn.
To know more about the Hess's law refer here :
https://brainly.com/question/10504932#
#SPJ11
sodium propionate is more soluble than propionic acid because sodium propionate is a solid and experiences increased
Sodium propionate is more soluble than propionic acid because sodium propionate is a solid and experiences increased disorder when it dissolves, while propionic acid is a liquid and does not.
When a solid substance dissolves in a solvent, such as water, it goes from a more ordered state (solid) to a more disordered state (solution). This process is driven by an increase in disorder or entropy. Sodium propionate is solid, and when it dissolves in water, the sodium and propionate ions become dispersed in the solution, leading to an increase in disorder.
On the other hand, propionic acid is a liquid and does not undergo a significant change in the degree of disorder when it dissolves. Therefore, the increased solubility of sodium propionate compared to propionic acid can be attributed to the solid sodium propionate experiencing increased disorder when it dissolves.
Learn more about Sodium propionate at https://brainly.com/question/13289837
#SPJ11
The complete question is:
Sodium propionate is more soluble than propionic acid because sodium propionate is a solid and experiences increased __________ when it dissolves, while propionic acid is a liquid and does not.
determine the ka for the acid ha given that the equilibrium concentrations are [ha]=1.15 m, [a−]=0.0767 m, and [h3o ]=0.0383 m.
We will use the following equation to determine the Ka of the acid HA. the Ka of the acid HA is 0.0025524 M.
Ka = [H3O+][A-] / [HA] [HA] is the initial concentration of HA before the reaction starts. HA (aq) + H2O (l) ⇌ H3O+ (aq) + A-(aq)
We know that the concentration of HA at equilibrium is 1.15 mM and that the concentration of H3O+ is 0.0383 mM at equilibrium.
[A-] is 0.0767 mM, but we can't use it directly because we need to find the concentration of A- at equilibrium. Because HA and A- are in a 1:1 ratio, the concentration of A- at equilibrium will also be 0.0767 mM.
Therefore,
the equilibrium concentrations are:
[HA] = 1.15 mM[A-]
= 0.0767 mM[H3O+]
= 0.0383 mM.
Substituting these concentrations into the Ka expression, we get:
Ka = [H3O+][A-] / [HA]
= (0.0383 mM)(0.0767 mM) / (1.15 mM)
= 0.0025524 M
Therefore, the Ka of the acid HA is 0.0025524 M.
To know more about equilibrium concentrations visit
https://brainly.com/question/16645766
#SPJ11
If you have 2.8 moles of gas held at a temperature of 95.0 degrees Celsius and in a container with a volume of 40.0 L, what is the pressure of the gas in atm?
the pressure of the gas is 58.6 atm.
The pressure of a gas depends on its temperature, volume, and the number of moles of gas present. The ideal gas law, PV = nRT, can be used to calculate the pressure of a gas in such cases.
Here, we are given the number of moles of gas, temperature, and volume of the gas, and we need to calculate the pressure of the gas in atm.
The value of the universal gas constant (R) is 0.0821 L·atm/mol·K.
P = pressure of gas
V = volume of gasn = number of moles of gas
R = universal gas constant
T = temperature of gas
The formula of the ideal gas law:
PV = nRT
Firstly, let's convert the temperature of the gas to Kelvin.
T = 95.0 °C + 273.15 = 368.15 K
Now we can substitute the values into the formula to get:
P = (nRT) / V
where
P = pressure of gas = ?
n = number of moles of gas = 2.8 mol
V = volume of gas = 40.0 L = 0.0400
R = universal gas constant = 0.0821 L·atm/mol·K
T = temperature of gas = 368.15 KP = (2.8 mol × 0.0821 L·atm/mol·K × 368.15 K) / 0.0400 LP = 58.6 atm
Therefore, the pressure of the gas is 58.6 atm.
learn more about pressure here
https://brainly.com/question/28012687
#SPJ11
what is the iupac name for the following compound? m10q2 5-ethyl-6-methyl-7-octen-4-ol 3-ethyl-4-methyl-2-octen-5-ol 4-ethyl-6-methyl-1-octen-5-ol 4-ethyl-3-methyl-1-octen-5-ol
The IUPAC name for the following compound is 4-ethyl-6-methyl-1-octen-5-ol. Let's break down this IUPAC name of the given compound.
IUPAC name is the systematic method of naming organic chemical compounds. It is also known as the systematic naming system. The name of organic compounds specifies the structural information about the compounds. The given compound's IUPAC name is 4-ethyl-6-methyl-1-octen-5-ol. Let's break down this IUPAC name of the given compound.
The number 4 represents the location of the ethyl group on the fourth carbon of the chain. The number 6 represents the location of the methyl group on the sixth carbon of the chain.The number 1 represents the location of the double bond between the first and the second carbon of the chain. The number 5 represents the location of the hydroxyl (-OH) group on the fifth carbon of the chain.
To know more about methyl visit:
https://brainly.com/question/31490464
#SPJ11
cyclononane has 9 carbons how many hydrogens are in cyclononane
Cyclononane, which is an alkane known as alicyclic hydrocarbon, has a total of 20 hydrogen atoms.
Cyclononane is an alkane and has the molecular formula C9H18. Since there are nine carbon atoms, the number of hydrogen atoms can be determined by using the formula: 2n + 2, where n is the number of carbon atoms. 2n + 2 = 2(9) + 2 = 20. Therefore, cyclononane has 20 hydrogen atoms.
An alicyclic hydrocarbon with a ring of nine carbon atoms is cyclononane. A hydrocarbon is an organic molecule made completely of hydrogen and carbon in organic chemistry. Examples of group 14 hydrides include hydrocarbons. The majority of hydrocarbons are colorless and hydrophobic; they occasionally have a mild odor that is comparable to that of gasoline or lighter fluid.
More on Cyclononane: https://brainly.com/question/31325662
#SPJ11
predict whether sn will or will not dissolve spontaneously in hydrochloric acid
tin (Sn) will dissolve spontaneously in hydrochloric acid.
The solubility of tin (Sn) in hydrochloric acid (HCl) depends on various factors.
The pace of disintegration of Sn in HCl can be slow, and at times, it probably won't break down immediately. Sn, on the other hand, becomes more soluble in HCl as temperature rises. Hydrogen gas and tin(II) chloride are produced when tin dissolves in hydrochloric acid. The formula for the Sn-HCl reaction is as follows: SnCl2 + H2 vs. Sn + 2HCl
A single-displacement reaction is an illustration of one in which a metal replaces another metal in a compound to create a new metal compound. We can therefore anticipate that Sn will dissolve in hydrochloric acid to produce tin(II) chloride and hydrogen gas as it replaces the hydrogen in the HCl compound to create a new compound, SnCl2.
To know more about solubility:
https://brainly.com/question/23946616
#SPJ11
The temperature rises From 25.00 degree c to 29.00 degree c in a bomb calorimeter when 3.50 g of sucrose undergoes combustion in a bomb calorimeter. Calculate delta E rxn For the combustion of sucrose in kJ/mol sucrose. The heat capacity of the calorimeter is 4.90 kJ/ degree C . The molar mass of sugar is 342.3 g/mol. 1. 92 x 103 kJ/mole 2 .35 x 104 kJ/mole - 1.23 x 103 kJ/mole - 1. 92 x 103 kJ/mole
The combustion of 3.50 g of sucrose in a bomb calorimeter resulted in a temperature increase from [tex]25.00^0C[/tex] to [tex]29.00^0C[/tex]. The value of Δ[tex]E_{rxn}[/tex] for the combustion of sucrose is approximately [tex]-1.92 * 10^3[/tex] kJ/mol sucrose.
To calculate Δ[tex]E_r_x_n[/tex], we need to consider the heat transferred during the combustion of sucrose. The temperature rise in the calorimeter reflects this heat transfer. First, we calculate the heat absorbed by the calorimeter using the equation:
[tex]q_{calorimeter} = C_{calorimeter} *[/tex] ΔT
where [tex]q_{calorimeter}[/tex] is the heat absorbed by the calorimeter, [tex]q_{calorimeter}[/tex] is the heat capacity of the calorimeter ([tex]4.90 kJ/^0C[/tex]), and ΔT is the change in temperature ([tex]29.00^0C - 25.00^0C = 4.00^0C[/tex]). Substituting the values:
[tex]q_{calorimeter}[/tex] = [tex]4.90 kJ/^0C[/tex] × [tex]4.00^0C[/tex] = 19.6 kJ
Since the heat released by the combustion is equal to the heat absorbed by the calorimeter, we have:
[tex]q_{combustion}[/tex] = [tex]-q_{calorimeter}[/tex] = -19.6 kJ
Next, we convert the mass of sucrose (3.50 g) to moles using its molar mass (342.3 g/mol):
moles of sucrose = 3.50 g / 342.3 g/mol = 0.0102 mol
Finally, we can calculate Δ[tex]E_{rxn}[/tex] using the equation:
Δ[tex]E_{rxn}[/tex] = [tex]q_{combustion}[/tex] / moles of sucrose = -19.6 kJ / 0.0102 mol = [tex]-1.92 * 10^3[/tex] kJ/mol sucrose
Therefore, the value of Δ[tex]E_{rxn}[/tex]for the combustion of sucrose is approximately [tex]-1.92 * 10^3[/tex] kJ/mol sucrose.
Learn more about bomb calorimeter here:
https://brainly.com/question/31817670
#SPJ11
determine the value of k so that the damping ratio is 0.6. also obtain the peak time, maximum overshoot and settling time for the step response.
Therefore, the value of k is 0.64/T², peak time is 1.25T, maximum overshoot is 23.6% and settling time is 6.67 seconds.
Given data:
Damping ratio, ζ = 0.6
We know that the settling time, Ts = 4 / ζωn
The formula for the natural frequency is given as follows;ωn = √(1 - ζ²) / Tk = 2π / T
Therefore, substituting the values of k and ζ in the equations, we have:
ωn = √(1 - ζ²) / Tωn = √(1 - (0.6)²) / Tωn = √(0.64) / Tωn = 0.8 / T
T = 2π / ωnk = ωn²Then; k = (0.8 / T)²
k = 0.64 / T²
We have also, Ts = 4 / ζωnTs = 4 / (0.6 * 0.8 / T)Ts = 6.667 seconds
Maximum overshoot (Mp) is given by;
Mp = e^(-πζ / √(1 - ζ²))
Mp = e^(-π * 0.6 / √(1 - 0.6²))Mp = 0.236
Settling time (Ts) is given by;
Ts = 4 / ζωnTs = 4 / (0.6 * 0.8 / T)Ts = 6.667 seconds
Therefore, the value of k is 0.64/T², peak time is 1.25T, maximum overshoot is 23.6% and settling time is 6.67 seconds.
To know more about damping ratio visit:
https://brainly.com/question/20115234
#SPJ11
Which of the following represents the rate at which CIO, (aq) is appearing in the reaction below? 2 CIO (aq) + 2 OH(aq) → CIO, (aq) + CIOs (aq) + H2O(l) A) +1/2A[CIOJAT B)-A[HOJAT C) +A[OHJAT D) +1/2A(OHJAT E) +ACCIO: ] At
The rate of appearance of CIO in the given chemical reaction is denoted by the option (D) +1/2A(OH).
The rate of a reaction can be expressed in terms of appearance or disappearance of reactants and products. The rate of appearance of a reactant in a reaction is the measure of the increase in the concentration of that reactant per unit time in the reaction. The rate of disappearance of a reactant is the measure of the decrease in the concentration of that reactant per unit time in the reaction.
The chemical reaction is given by: 2CIO (aq) + 2OH(aq) → CIO (aq) + CIOs (aq) + H2O(l)We have to determine the rate of appearance of CIO, which is represented as +1/2A(OH).
To know more about chemical reaction visit:-
https://brainly.com/question/22817140
#SPJ11
the coefficient of a particular substance in a balanced equation represents ___________.
The coefficient of a particular substance in a balanced equation represents the number of moles of that substance that react or are produced in the reaction.
When a chemical equation is balanced, the coefficients tell the ratios in which substances react and are produced in the reaction.
In a balanced chemical equation, the law of conservation of mass is obeyed. This law states that in any chemical reaction, the mass of the reactants should be equal to the mass of the products, implying that atoms can neither be created nor destroyed.The coefficient of a substance in a balanced equation determines the number of moles of that substance that react or are produced. Thus, the coefficients can be used to calculate the stoichiometry of a reaction and hence, the quantity of products formed. Additionally, the coefficients can be used to determine the limiting reactant in a reaction, which is the reactant that is completely consumed, thereby limiting the amount of product that can be produced. The non-limiting reactant, on the other hand, remains in excess.
Thus, the coefficient of a particular substance in a balanced equation represents the number of moles of that substance that react or are produced in the reaction.
To know more about balanced equation visit:
https://brainly.com/question/31242898
#SPJ11
Use the appropriate standard reduction potentials below to determine the equilibrium constant at 391 K for the following reaction under acidic conditions. 41" (aq) + Mn0,(s) +2Fe2+ (aq) --Mn?* (aq) + 2Fe2+ (aq) + 2H,001) Standard reduction potentials: Mnog(x) +44 (aq) +20 - Mn?" (aq) +H,0(1) E - 1.23 V Fe?+ (aq) + 6 Fe?" (ag) = 0.770 V
Given:
Temperature T = 391KReaction:41" (aq) + Mn0,(s) +2Fe2+ (aq) --Mn?* (aq) + 2Fe2+ (aq) + 2H,001) From the given standard reduction potentials, the balanced chemical reaction taking place can be written as:4H+(aq) + MnO2(s) + 2Fe2+(aq) -> Mn2+(aq) + 2Fe3+(aq) + 2H2O
(l) Standard reduction potentials:
MnO2(s) + 4H+(aq) + 2e- -> Mn2+(aq) + 2H2O(l) E° = 1.23 VFe3+(aq) + e- -> Fe2+(aq) E° = 0.77 V
The balanced chemical reaction can be split into two half-reactions: Oxidation half-reaction: MnO2(s) + 4H+(aq) + 2e- -> Mn2+(aq) + 2H2O(l)Reduction half-reaction: Fe3+(aq) + e- -> Fe2+(aq)The equilibrium constant can be calculated using the Nernst equation, which gives the relationship between equilibrium constants and reduction potentials:log(K) = (nFE°)/2.303RTwhereK = equilibrium constantn = number of electrons transferred in the overall balanced reactionF = Faraday's constantR = gas constantT = temperatureE° = standard reduction potential
We can write the equation for the overall balanced reaction as follows:
Fe3+(aq) + MnO2(s) + 4H+(aq) + 2Fe2+(aq) -> Mn2+(aq) + 2Fe3+(aq) + 2H2O
(l)The standard reduction potential for the overall balanced reaction can be calculated using the standard reduction potentials of the two half-reactions .E° cell = E°(reduction) - E°(oxidation)E° cell = 0.77 V - 1.23 V = -0.46 V Substituting the values in the Nernst equation: log(K) = ((2)(96485 C mol-1)(-0.46 V))/(2.303(8.314 J mol-1 K-1)(391 K))log(K) = -9.7K = 2.0 x 10-10Therefore, the equilibrium constant at 391 K is 2.0 x 10-10.
To know more about half-reactions refer to:
https://brainly.com/question/26411933
#SPJ11
the concentration of an acid in the henderson-hasselbalch equation is represented by _____.fill in the blank
In the Henderson-Hasselbalch equation, the concentration of an acid is represented by its dissociation constant Ka.
The Henderson-Hasselbalch equation is an equation that relates the pH of a buffer to the dissociation constant and the concentrations of the weak acid and its conjugate base in the buffer solution. The Henderson-Hasselbalch equation is a quantitative relationship between the pH, pKa, and the buffer's ratio of conjugate base to weak acid.
This equation is often used to calculate the pH of a buffer solution. It is represented mathematically as:pH = pKa + log([A-]/[HA])Where:pH is the negative logarithm of the hydrogen ion concentration.pKa is the negative logarithm of the acid dissociation constant, Ka.[A-] is the concentration of the conjugate base of the weak acid.
[HA] is the concentration of the weak acid.The Henderson-Hasselbalch equation can also be used to determine the proportion of acid to its conjugate base or vice versa in a buffer system given the pH and the dissociation constant of the acid.
Learn more about Henderson-Hasselbalch equation
brainly.com/question/31495136
#SPJ11
the vapor pressure of butane at 300 k is 2.2 bar and the density is 0.5788 g/ml. what is the vapor pressure of butane in air at blank
The vapor pressure of butane at 300 k is 2.2 bar and the density is 0.5788 g/ml. The vapor pressure of butane in the air is at 0.022 bar.
The vapor pressure of butane at 300 K is 2.2 bar. The density of butane is 0.5788 g/ml. Air pressure is not given. Furthermore, we can calculate the mole fraction of butane, and then we can use Dalton's law of partial pressure to calculate the vapor pressure of butane in air. The mole fraction of butane can be calculated as follows:
mole fraction of butane = (mass of butane / molar mass of butane) / (density of butane / molar mass of butane + density of air / molar mass of air)
molar mass of butane = 58 gmol⁻¹, and molar mass of air = 29 gmol⁻¹
mass of butane = density of butane × volume of butane = 0.5788 g/ml × 1000 ml/liter = 578.8 g/m³
Thus, mole fraction of butane = (578.8 / 58) / (0.5788 / 58 + 1.225 / 29) = 0.0099 (approx)
Now, using Dalton's law of partial pressure, the vapor pressure of butane in the air at unknown pressure is given by:
p = P° x mole fraction of butane
where p is the vapor pressure of butane in air, and P° is the vapor pressure of butane at 300 K= 2.2 bar. Putting all values in the formula we get
p = 2.2 × 0.0099 ≈ 0.022 bar (approx)
Hence, the vapor pressure of butane in the air at unknown pressure is 0.022 bar.
You can learn more about vapor pressure at: brainly.com/question/29640321
#SPJ11
We can use the ideal gas law to calculate the number of moles of air. At 300 K, 1 atm pressure, and 1 L volume:
P = nRT/Vn_air = PV/RTn_air = (1.01325 bar * 1000 cm³) / (0.08206 L atm/mol K * 300 K)n_air = 0.0419 mol
Now:
n_total = n_butane + n_airn_total = 0.00996 mol + 0.0419 mol = 0.05186 molX = n_butane / n_totalX = 0.00996 mol / 0.05186 molX = 0.192P_vap = P_total * XP_vap = 1.01325 bar * 0.192P_vap = 0.1946 bar
Therefore, the vapor pressure of butane in air at 300 K is approximately 0.1946 bar or 19.46 kPa (rounded off to two significant figures).
The vapor pressure of butane at 300 K is 2.2 bar and the density is 0.5788 g/mL. The vapor pressure of butane in air at the given temperature needs to be calculated.What is the vapor pressure of butane in air?Given information:Vapor pressure of butane, P = 2.2 bar Density of butane, ρ = 0.5788 g/mLFirst, let's convert the density from grams per milliliter to kilograms per cubic meter.
1 g/mL = 1000 kg/m³0.5788 g/mL = 578.8 kg/m³
Now we can use the relationship between vapor pressure, mole fraction, and partial pressure to solve for the vapor pressure of butane in air. This is given by Dalton's law of partial pressures.P_vap = P_total * XWhere:P_vap = Vapor pressure of butane in airP_total = Total pressureX = Mole fraction of butane in airLet's assume that the pressure of air is 1 atm or 1.01325 bar. We need to calculate the mole fraction of butane in air.The density of butane, ρ = m/V = n * MM/Vn = number of moles of butaneMM = molar mass of butaneV = volume of butaneLet's take 1 L of butane gas, which weighs 0.5788 kg. The molar mass of butane is 58.12 g/mol.n = 0.5788 g / 58.12 g/mol = 0.00996 molV = 1 L = 1000 cm³Now we need to calculate the mole fraction of butane in air. This is given by:X = n_butane / n_totalWhere:n_butane = number of moles of butanen_total = total number of molesLet's assume that the volume of air is equal to the volume of butane gas. Therefore, the total number of moles of gas is:n_total = n_butane + n_airWe can use the ideal gas law to calculate the number of moles of air. At 300 K, 1 atm pressure, and 1 L volume:
P = nRT/Vn_air = PV/RTn_air = (1.01325 bar * 1000 cm³) / (0.08206 L atm/mol K * 300 K)n_air = 0.0419 mol
Now:
n_total = n_butane + n_airn_total = 0.00996 mol + 0.0419 mol = 0.05186 molX = n_butane / n_totalX = 0.00996 mol / 0.05186 molX = 0.192P_vap = P_total * XP_vap = 1.01325 bar * 0.192P_vap = 0.1946 bar
Therefore, the vapor pressure of butane in air at 300 K is approximately 0.1946 bar or 19.46 kPa (rounded off to two significant figures).
To know more about gas law visit:
https://brainly.com/question/30458409
#SPJ11
Which of the following is a salt that could be generated by combining a weak acid and a weak base? Select the correct answer below: O NaCl Na,SO4 O NH,NO 443 NH F
The right answer is NH4F.
A salt can be defined as any ionic compound that is composed of positively charged cations and negatively charged anions. A weak acid is an acid that partially dissociates in water to create a relatively little number of hydrogen ions. A weak base is a base that does not completely dissolve in water or only partially ionizes to release hydroxide ions. By reacting a weak acid with a weak base, a salt can be generated.
NH4F is the correct answer because NH4+ is a weak acid and F- is a weak base. When NH4+ is combined with F-, NH4F is formed. NH4F is ammonium fluoride, which is an ionic salt that is made up of ammonium cations (NH4+) and fluoride anions (F-).
To know more about Ammonium Fluoride visit:
https://brainly.com/question/20528587
#SPJ11
PLEASE HELP! WILL MEDAL!
1. Write the balanced equation for the reaction between zinc and acetic acid?
2. Classify the reaction between zinc and acetic acid and explain, in general terms, what happens during this type of reaction?
3. Give an example of a type of element and a type of compound that are likely to participate in this type of reaction?
The reaction between zinc and acetic acid is classified as a single displacement reaction. This type of reaction is characterized by the replacement of an atom or a group of atoms of a compound by another atom or group of atoms.
The balanced chemical equation for the reaction between zinc and acetic acid is as follows:
Zn + 2CH₃COOH → Zn(CH₃COO)₂ + H₂
In general terms, during a single displacement reaction, an element replaces another element in a compound. This type of reaction occurs when an element that is more reactive than the one already present in a compound is introduced. For example, in the reaction between zinc and acetic acid, zinc is more reactive than hydrogen and, therefore, replaces hydrogen in acetic acid.
An example of a type of element and a type of compound that are likely to participate in a single displacement reaction is sodium and hydrochloric acid. Sodium is more reactive than hydrogen and can replace hydrogen in hydrochloric acid. The balanced chemical equation for the reaction between sodium and hydrochloric acid is as follows:
2Na + 2HCl → 2NaCl + H₂
In conclusion, the balanced equation for the reaction between zinc and acetic acid is Zn + 2CH₃COOH → Zn(CH₃COO)₂ + H₂, and this reaction is classified as a single displacement reaction. During this type of reaction, an element replaces another element in a compound. An example of a type of element and a type of compound that are likely to participate in this type of reaction is sodium and hydrochloric acid.
to know more about displacement reaction visit:
brainly.com/question/29307794
#SPJ11
the sp of scandium fluoride, scf3 , is 5.81×10−24 . calculate the molar solubility, , of this compound.
Answer:
Explanation:
To determine the molar solubility of a compound, the solubility product constant (Ksp) and the stoichiometry of the compound are required. Solubility product constant represents equilibrium expression for the dissociation of the compound in the solution.
The given solubility product constant [tex]K_{sp}[/tex] for scandium fluoride [tex]ScF_{3}[/tex] is 5.81×[tex]10^{-24}[/tex]
Balanced chemical equation for the dissociation [tex]ScF_{3}[/tex] is:
[tex]ScF_{3}[/tex] (s) ⇌ [tex]Sc^{+3}[/tex]+ (aq) + [tex]3F^{-3}[/tex] (aq)
Assume that 'x' represents the molar solubility of [tex]ScF_{3}[/tex] moles per liter (mol/L).
Equilibrium expression for the solubility product constant is:
[tex]K_{sp}[/tex] =[tex]Sc^{3}[/tex]+[tex]({F^{-}} )^3[/tex]
As the stoichiometry of [tex]ScF_{3}[/tex] is 1:3, it can be expressed the concentration of fluoride ions ([[tex]F^{-}[/tex]]) in terms of 'x':
[[tex]F^{-}[/tex]] = 3x
Substituting this into the Ksp expression, we have:
Ksp = [tex](x)(3x)^{3[/tex]
5.81×[tex]10^{-24}[/tex] = 27[tex]x^{4}[/tex]
Simplifying the equation further, we get:
[tex]x^{4}[/tex] = (5.81×[tex]10^{-24}[/tex]) / 27
[tex]x^{4}[/tex] = 2.15×[tex]10^{-26}[/tex]
Taking the fourth root of both sides, we find:
x = 2.15 × [tex]10^{-26}^(1/4)[/tex]
x ≈ 1.01×[tex]10^{-6}[/tex]
Therefore, the molar solubility of scandium fluoride [tex]ScF_{3}[/tex] is approximately 1.01×[tex]10^{-6}[/tex] mol/L.
Learn more about "molar solubility" here:
https://brainly.com/question/31778415?referrer=searchResults
#SPJ12
calculate the ph of a solution containing a caffeine concentration of 455 mg/l .
It is important to note that caffeine does not usually exist in its acid form in aqueous solutions, as it is highly soluble in water and is usually found in its salt form.
To calculate the pH of a solution containing a caffeine concentration of 455 mg/L, we can use the following steps:Step 1: Write the chemical equation of caffeine Caffeine, C8H10N4O2 Step 2: Write the expression of the dissociation of caffeine in water
C8H10N4O2 ⇌ C8H9N4O2− + H+
Step 3: Write the equilibrium constant expression
Kw = [C8H9N4O2−] [H+] / [C8H10N4O2]
Since caffeine is a weak acid, we can use the following formula to calculate its
pH:pH = pKa + log([salt]/[acid])
where pKa is the acid dissociation constant for caffeine, [salt] is the concentration of the salt form of caffeine, and [acid] is the concentration of the acid form of caffeine. The acid form of caffeine is C8H10N4O2, and the salt form of caffeine is C8H9N4O2−. The pKa of caffeine is about 0.02.To calculate the pH of a solution containing a caffeine concentration of 455 mg/L, we need to convert the concentration of caffeine from mg/L to mol/L. The molar mass of caffeine is 194.19 g/mol, so 455 mg/L is equivalent to
2.34 × 10−3 mol/L.
Then we can use the formula above to calculate the
pH:pH = 0.02 + log([C8H9N4O2−]/[C8H10N4O2])pH = 0.02 + log(2.25 × 10−8 / 2.34 × 10−3)pH = 0.02 + log(9.62 × 10−12)pH = 0.02 - 11.02pH ≈ -11.00
Since the pH is negative, this solution is highly acidic. However, it is important to note that caffeine does not usually exist in its acid form in aqueous solutions, as it is highly soluble in water and is usually found in its salt form.
To know more about caffeine visit:
https://brainly.com/question/31830048
#SPJ11
Caffeine is very soluble in water and is typically found in its salt form, hence it is vital to note that it does not typically exist in its acid form in aqueous solutions.
Thus, We can use the following procedures to determine the pH of a solution with 455 mg/L of caffeine in it: Step 1: Compose the caffeine chemical equation. C₈H₁₀N₄O₂ Caffeine Step 2: Express the dissociation of caffeine in water in writing.
Step 3: Compose the expression for the equilibrium constant : C₈H₁₀N₄O₂ Kw [H+] /C₈H₁₀N₄O₂
Given that caffeine is a weak acid, the following formula can be used to get its : pH:pH = pKa + log(salt/acid), where [salt] is the concentration of caffeine in its salt form, and pKa is the caffeine's acid dissociation constant.
Thus, Caffeine is very soluble in water and is typically found in its salt form, hence it is vital to note that it does not typically exist in its acid form in aqueous solutions.
Learn more about Caffeine, refer to the link:
https://brainly.com/question/30377079
#SPJ4
all mature polypeptides contain a methionine at the n-terminus. true or false
The statement, "All mature polypeptides contain a methionine at the n-terminus" is not true.
Here is why:
Proteins are made up of a series of amino acids that are covalently bonded together to form a polypeptide chain. The N-terminus is the end of the protein chain where the first amino acid is covalently linked to an amino group (NH3+).Similarly, the C-terminus is the end of the chain where the final amino acid is covalently bonded to a carboxyl group (COO-).
To begin with, there are two types of methionines: initiator methionine and internal methionine.Initiator methionine is the methionine that is attached to the amino acid at the beginning of the translation process to start protein synthesis. It is also known as the start codon. Once the translation is complete, this methionine is cleaved off to form a mature polypeptide.Internal methionine, on the other hand, can occur at any location in the polypeptide chain other than the beginning. It may or may not be removed during or after translation, depending on the protein being synthesized.
Therefore, not all mature polypeptides contain a methionine at the N-terminus. The final composition of the polypeptide chain is determined by the specific protein being synthesized.
To know more about polypeptides : https://brainly.com/question/29794344
#SPJ11
consider the elementary reaction equation k(g) hcl(g)⟶kcl(g) h(g) what is the order with respect to k?
The order with respect to K is one in the elementary reaction equation K(g) + HCl(g) ⟶ KCl(g) + H(g).
The order of a reaction is defined as the sum of the exponents of the concentrations of the reactants in the rate law equation.
The order of the reaction is given by the rate law's exponents, which may or may not match the stoichiometric coefficients of the chemical equation.
K(g) + HCl(g) ⟶ KCl(g) + H(g) is the balanced equation for the elementary reaction equation.
k(g) represents the K atoms in the gaseous state, and hcl(g) represents the hydrogen chloride molecule in the gaseous state,
while
kcl(g) represents the potassium chloride molecule in the gaseous state,
h(g) represents the hydrogen molecule in the gaseous state.
Each rate law expression is written in terms of the initial concentrations of reactants, which are then substituted into the experimental data to determine the rate constant.
The order with respect to K is given by the rate law expression for the overall reaction, which is found to be first order.
Therefore, the order with respect to K is 1 in the elementary reaction equation K(g) + HCl(g) ⟶ KCl(g) + H(g).
Learn more about the elementary reaction:
brainly.com/question/31115657
#SPJ11
A biochemist completely digests a glycerophospholipid with a mixture of phospholipases A and D. HPLC and mass spectrometry analysis reveals the presence of an amino acid of 105.09 Da, a saturated fatty acid of 256.43 Da, and an omega-3 monounsaturated fatty acid of 282.45 Da.
Which amino acid does the glycerophospholipid contain? a. valine (C5H11NO2) b. alanine (C3H7NO2) c. serine (C3H7NO2) d. proline (C3H9NO2)
The amino acid that the glycerophospholipid contains is serine ([tex]C_3H_7NO_2[/tex]). Option c. is correct.
Phospholipases are enzymes that catalyze the hydrolysis of phospholipids into glycerophospholipids, fatty acids, and water. Glycerophospholipids have a glycerol backbone, which is attached to fatty acids and a phosphate-containing polar head group that is attached to an amino alcohol. They are a significant component of the cell membrane, as they provide a barrier between the interior and exterior of the cell.
They also serve as precursors for signaling molecules and other lipids. The mass spectrometry analysis of the completely digested glycerophospholipid reveals that the lipid contains an amino acid of 105.09 Da, a saturated fatty acid of 256.43 Da, and an omega-3 monounsaturated fatty acid of 282.45 Da.
The amino acid that has a mass of 105.09 Da is serine ([tex]C_3H_7NO_2[/tex]).Therefore, the correct answer is option c. serine ([tex]C_3H_7NO_2[/tex]).
To know more about amino acid refer here :
https://brainly.com/question/24106148
#SPJ11
Dissolving 3.00 g of an impure sample of calcium carbonate in excess hydrochloric acid produced 0.656 L of carbon dioxide (measured at 20.0oC and 792 mmHg). The equation for the reaction is: CaCO3 (s) + 2HCl ? CaCl2 (aq) + 2H2O (?) + CO2 (g) Calculate the percent by mass of calcium carbonate in the sample, assuming 100% efficiency. [Ca = 40.08; C = 12.01; O = 16.00; 1 atm = 760 mmHg; R = 0.08206 L.atm/mol/K].
The experiment involved dissolving an impure sample of calcium carbonate in excess hydrochloric acid, resulting in the production of carbon dioxide gas. 0.840% is the percentage of calcium carbonate in the sample.
To calculate the percentage by mass of calcium carbonate in the sample, we need to determine the number of moles of carbon dioxide produced. The ideal gas law equation, PV = nRT, can be used to convert the measured volume of carbon dioxide to moles.
First, convert the temperature to Kelvin by adding 273.15 to 20.0oC, giving 293.15 K. Then, convert the pressure from mmHg to atm by dividing 792 mmHg by 760 mmHg/atm, resulting in 1.042 atm.
Using the ideal gas law, PV = nRT, we can rearrange the equation to solve for n (moles). Substitute the values into the equation: (1.042 atm) * (0.656 L) = n * (0.08206 L.atm/mol/K) * (293.15 K). Solving for n gives us 0.0252 moles of [tex]CO_2[/tex].
Since the reaction stoichiometry shows that 1 mole of [tex]CaCO_3[/tex] produces 1 mole of [tex]CO_2[/tex], the number of moles of [tex]CaCO_3[/tex] in the sample is also 0.0252.
To calculate the percentage by mass of calcium carbonate, divide the mass of [tex]CaCO_3[/tex] by the mass of the sample (3.00 g) and multiply by 100%. The molar mass of [tex]CaCO_3[/tex] is (40.08 g/mol + 12.01 g/mol + 3 * 16.00 g/mol) = 100.09 g/mol. Therefore, the percentage by mass of calcium carbonate in the sample is (0.0252 mol * 100.09 g/mol / 3.00 g) * 100% = 0.840%.
Learn more about ideal gas law equation here:
https://brainly.com/question/11544185
#SPJ11
The equilibrium constant for the formation of hydrogen iodide from hydrogen and iodine, H2(g) + 12(s) — 2 HI(g), is 1.72 x 10-2 at 700 K. Which statement regarding this equilibrium is definitely true? O The rate of the reverse reaction is slower than the rate of the forward reaction. O Equilibrium lies far to the left. O The reaction is product favored. O The reaction has stopped. O The reactants and products reach equilibrium quickly.
The statement regarding this equilibrium that is definitely true is: the equilibrium lies far to the left. Since the equilibrium constant (Kc) value is less than one, it indicates that the concentration of reactants (H2 and I2) is much higher than the concentration of products (2HI). Therefore, the equilibrium lies far to the left.
The equilibrium constant for the formation of hydrogen iodide from hydrogen and iodine,
H2(g) + I2(s) — 2 HI(g), is 1.72 x 10-2 at 700 K.
The statement regarding this equilibrium that is definitely true is: the equilibrium lies far to the left.What is an Equilibrium Constant?The equilibrium constant (Kc) is the ratio of products to reactants at equilibrium and can be used to determine the composition of the system at equilibrium. The value of Kc indicates whether a reaction produces more products or reactants and how far to the right or left the reaction goes at equilibrium. It is used to determine if a reaction is product-favored, reactant-favored, or neither (equal amount of products and reactants).What is a Reaction Quotient?A reaction quotient (Q) is a measure of the relative amounts of products and reactants present in a reaction mixture at a given point in time. A reaction quotient is a constant that depends on the concentration of reactants and products in a solution. The relationship between the reaction quotient and the equilibrium constant (Kc) is given by the expression Qc = Kc.What is the direction of a reaction at equilibrium?If Q < Kc, the reaction will proceed in the forward direction until equilibrium is reached. If Q > Kc, the reaction will proceed in the reverse direction until equilibrium is reached. If Q = Kc, the system is at equilibrium, and no net reaction occurs.What is true about the statement?The equilibrium constant for the formation of hydrogen iodide from hydrogen and iodine,
H2(g) + I2(s) — 2 HI(g), is 1.72 x 10-2 at 700 K.
The statement regarding this equilibrium that is definitely true is: the equilibrium lies far to the left. Since the equilibrium constant (Kc) value is less than one, it indicates that the concentration of reactants (H2 and I2) is much higher than the concentration of products (2HI). Therefore, the equilibrium lies far to the left.
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
the product of the nucleophilic aromatic substitution reaction, 2,4-dinitrophenylthiocyanate, will be isolated according to which of the following procedures?
The product of the nucleophilic aromatic substitution reaction, 2,4-dinitrophenylthiocyanate, will be isolated by crystallization from an organic solvent such as methanol or ethanol.
In organic chemistry, nucleophilic aromatic substitution (S[subscript]NAr) is a reaction where a nucleophile replaces a leaving group on an aromatic ring. This reaction occurs under conditions where the electrophile is strongly deactivated or ortho/para directing. The product of the nucleophilic aromatic substitution reaction, 2,4-dinitrophenylthiocyanate, will be isolated by crystallization from an organic solvent such as methanol or ethanol.
The general procedure for isolating a solid product by crystallization involves dissolving the crude product in a suitable solvent and then slowly cooling the solution to allow the product to crystallize out. The product is then filtered, washed with cold solvent, and air-dried. The purity of the product can be determined by melting point analysis.
To know more about methanol visit:
https://brainly.com/question/18725375
#SPJ11
FILL IN THE BLANK. Balance the following redox reaction under basic conditions: CH(OH)3 (s) + Cu²+ (aq) - Cro4²- (aq) + Cu+ (aq) How many electrons are transferred during the reaction? Input a number ______
6 electrons are transferred during the reaction.
The balanced equation for the given redox reaction is as follows:
[tex]CH(OH)_3[/tex] + 3Cu²+ + 2OH⁻ → CrO4²⁻ + 3Cu+ + 3H2O
In this reaction, electrons are transferred from Cu²+ ions to CrO4²⁻ ions.
Each Cu²+ ion loses one electron to form Cu+ ion. The oxidation state of Cu is reduced from +2 to +1.3
Cu²+ → 3Cu+ + 3e⁻
Electrons are also transferred from CrO4²⁻ ions to [tex]CH(OH)_3[/tex] molecules. The oxidation state of Cr is reduced from +6 to +3. CrO4²⁻ + 3H2O →[tex]Cr(OH)_3[/tex] + 4OH⁻
In this reaction, CrO4²⁻ ions gain 3 electrons to form [tex]Cr(OH)_3[/tex] molecules.
4OH⁻ + CrO4²⁻ + 3e⁻ → [tex]Cr(OH)_3[/tex] + 4OH⁻
Thus, 6 electrons are transferred during the reaction.
To know more about electrons refer here:
https://brainly.com/question/13358657
#SPJ11
what is the mass (in g) of 1.00 ml of glycerol (l)? density of glycerol is 1.261 g ml-1 at 20 °c. use significant figure rules.
The formula for density is: `Density = mass/volume. `From this formula, we can rearrange to find the mass: `mass = Density x volume`.
The formula for density is: `Density = mass/volume. `From this formula, we can rearrange to find the mass: `mass = Density x volume`. Therefore, the mass of 1.00 ml of glycerol (l) can be calculated as follows:
First, we need to recall that the density of glycerol is 1.261 g ml-1 at 20 °C. Therefore, the mass of 1 ml of glycerol is given by: `mass = Density x volume`. We substitute the values and we get: `mass = 1.261 g ml-1 × 1.00 ml`. This gives us the mass of glycerol as: `mass = 1.261 g`.
We can say that the mass of 1.00 ml of glycerol is found by using the density of glycerol at 20 °C, which is 1.261 g ml-1. According to the formula for density, `Density = mass/volume`, we can rearrange the formula to find the mass, which is `mass = Density x volume`. We substitute the known values and we get: `mass = 1.261 g ml-1 × 1.00 ml`. This gives us the mass of glycerol as 1.261 g. Therefore, the mass of 1.00 ml of glycerol is 1.261 g (rounded to three significant figures).
To know more about density visit: https://brainly.com/question/29775886
#SPJ11
wat is the empirical formula for a compound that contains 0.126 mol ci ad 0.44 mol o
The empirical formula for the compound that contains 0.126 mol of Cl and 0.44 mol of O is [tex]Cl_2O_7[/tex].
The empirical formula of a compound represents the simplest whole-number ratio of atoms present in the compound. To determine the empirical formula, we need to find the ratio of the number of moles of each element in the compound.
Given that there are 0.126 mol of Cl and 0.44 mol of O, we can start by dividing both values by the smallest number of moles, which is 0.126 mol in this case.
[tex]\(\frac{0.126 \text{ mol}}{0.126 \text{ mol}} = 1\) and \(\frac{0.44 \text{ mol}}{0.126 \text{ mol}} \approx 3.49\)[/tex]
Rounding the ratio to the nearest whole number, we get 1:3. Therefore, the empirical formula is [tex]\(\text{Cl}_1\text{O}_3\)[/tex].
However, empirical formulas are usually expressed using the simplest whole-number ratio. Since we cannot have fractional subscripts, we multiply the subscripts by 2 to get the final empirical formula:[tex](\text{Cl}_2\text{O}_6\)[/tex].
Hence, the empirical formula for the compound is [tex]Cl_2O_7[/tex].
To learn more about empirical formula refer:
brainly.com/question/1603500
#SPJ11
Which statements about the properties of different types of crystalline solids are correct? Select all that apply.
Particles in a molecular solid are held together by intermolecular forces.
Metallic bonding involves the delocalization of electrons.
Ionic solids adopt many different types of unit cells.
The following are the correct statements regarding the properties of different types of crystalline solids: Particles in a molecular solid are held together by intermolecular forces.
Metallic bonding involves the delocalization of electrons. Ionic solids adopt many different types of unit cells. Particles in a molecular solid are held together by intermolecular forces. A molecular solid is a type of solid that is made up of molecules held together by van der Waals forces, dipole-dipole interactions, and hydrogen bonds. Ionic solids have strong electrostatic forces of attraction between the positive and negative ions.
Therefore, they have high melting and boiling points. The opposite charges of the ions in the crystal lattice attract each other, making it hard to break apart the lattice. Ionic solids adopt many different types of unit cells.Metallic bonding involves the delocalization of electrons. Metals have a sea of electrons that are free to move throughout the lattice of positive ions. These free electrons are responsible for the electrical conductivity of metals and their high ductility and malleability.
To know more about boiling points refer to:
https://brainly.com/question/40140
#SPJ11
for a certain acid pka = 6.58. calculate the ph at which an aqueous solution of this acid would be 0.27 issociated. round your answer to 2 decimal places.
The pH at which the aqueous solution of this acid would be 0.27% dissociated is approximately 8.08. For a certain acid with a pKa of 6.58, we need to calculate the pH at which an aqueous solution of this acid would be 0.27% dissociated, rounded to two decimal places.
For a certain acid with a pKa of 6.58, we need to calculate the pH at which an aqueous solution of this acid would be 0.27% dissociated, rounded to two decimal places. The percent dissociation (α) of an acid is given by the formula:
α = 100 / (1 + 10^(pH - pKa))
At the point of half dissociation, i.e., when α = 0.27%, we have: 0.27 = 100 / (1 + 10^(pH - 6.58))
Simplifying this expression, we get: 0.0027 = 1 / (1 + 10^(pH - 6.58))
Taking reciprocals of both sides, we have: 370.37 = 1 + 10^(pH - 6.58)10^(pH - 6.58) = 370.37 - 1 = 369.37
Taking logarithms of both sides, we get: pH - 6.58 = log(369.37)pH = log(369.37) + 6.58
Therefore, pH = 8.08 (approx)
For this problem, we use the formula for the percent dissociation of an acid:α = 100 / (1 + 10^(pH - pKa))
where α is the percent dissociation of the acid, pH is the pH of the solution, and pKa is the acid dissociation constant. To find the pH at which the solution would be 0.27% dissociated, we need to use the above formula to solve for pH. The pKa of the acid is given as 6.58. At the point of half dissociation, the percent dissociation (α) is 0.27%. Substituting these values into the formula, we get: 0.27 = 100 / (1 + 10^(pH - 6.58))
Simplifying this equation, we get: 0.0027 = 1 / (1 + 10^(pH - 6.58))
Multiplying both sides by (1 + 10^(pH - 6.58)), we get: 1 + 10^(pH - 6.58) = 370.37
Taking the logarithm of both sides, we get: pH - 6.58 = log(370.37 - 1) = log(369.37)pH = log(369.37) + 6.58
Therefore, the pH at which the aqueous solution of this acid would be 0.27% dissociated is approximately 8.08.
To know more about pH visit: https://brainly.com/question/2288405
#SPJ11
what is the formula of a compound formed from the ions m 1 and x 3-? a. m 3x b. none of these c. mx d. mx 3
What are ions?Ions are electrically charged atoms or molecules that are formed when an atom or molecule gains or loses one or more electrons. Cations are positively charged ions, whereas anions are negatively charged ions.
Ions are formed when neutral atoms gain or lose one or more electrons, becoming positively or negatively charged. For example, when sodium (Na) loses an electron, it forms a positively charged ion (Na+). Similarly, when chlorine (Cl) gains an electron, it forms a negatively charged ion (Cl-).What is a compound?A compound is a substance made up of two or more elements that are chemically combined in a fixed ratio. Compounds can be composed of atoms of the same element or atoms of different elements. For example, carbon dioxide (CO2) is a compound made up of one carbon atom and two oxygen atoms. Similarly, water (H2O) is a compound made up of two hydrogen atoms and one oxygen atom.How to write the formula of a compound?The formula of a compound represents the ratio of the different atoms or ions in the compound. The formula of a compound is written by using the symbols of the elements or ions in the compound. The subscripts in the formula represent the number of atoms or ions of each element present in the compound.
For example, the formula of water is H2O, which indicates that there are two hydrogen atoms and one oxygen atom in each molecule of water. The formula of sodium chloride is NaCl, which indicates that there is one sodium ion and one chlorine ion in each molecule of sodium chloride. The formula of a compound formed from the ions m1 and x3- is mx.
Read more about electrically here;https://brainly.com/question/776932
#SPJ11
