Edward works as a waiter, where his monthly tip income is normally distributed with a mean of $2,000 and a standard deviation of $350. Use this information to answer the following questions. Record yo

Answers

Answer 1

The probability that Edward’s monthly tip income exceeds $2,350 is 0.8413.

Given that Edward works as a waiter, where his monthly tip income is normally distributed with a mean of $2,000 and a standard deviation of $350.

The z score formula is given by;`z = (x - μ) / σ`

Where; x is the raw scoreμ the mean of the populationσ is the standard deviation of the population.

The probability that Edward’s monthly tip income exceeds $2,350 is to be found.`z = (x - μ) / σ``z = (2350 - 2000) / 350``z = 1`

The value of z is 1.

To find the area in the right tail, use the standard normal distribution table.

The table value for z = 1.0 is 0.8413.

Therefore, the probability that Edward’s monthly tip income exceeds $2,350 is 0.8413.

Know more about probability here:

https://brainly.com/question/251701

#SPJ11


Related Questions

liquidity ratios the top part of mars, inc.'s 2013 balance sheet is listed as follows (in millions of dollars). picture what are mars, inc.'s current ratio, quick ratio, and cash ratio for 2013?

Answers

Liquidity ratios measure a company's capacity to meet its short-term obligations. Three key liquidity ratios, including the current ratio, quick ratio, and cash ratio, will be calculated for Mars, Inc.'s 2013 balance sheet, as shown below.  The Current ratio indicates the company's ability to pay its short-term debts using its current assets.

The current ratio is calculated by dividing current assets by current liabilities. The quick ratio is a measure of a company's ability to meet its short-term obligations using liquid assets. The quick ratio is calculated by dividing the sum of cash, accounts receivable, and short-term investments by current liabilities. The cash ratio is a measure of a company's ability to cover its current liabilities with cash and equivalents.

The cash ratio is calculated by dividing cash and cash equivalents by current liabilities.  The balance sheet for Mars, Inc. for 2013 is not provided. Hence, we cannot find its liquidity ratios without the necessary information.

To know more about Liquidity visit:

https://brainly.com/question/28028688

#SPJ11

Suppose the velocity of an object moving along a line is positive. Are​ position, displacement, and distance traveled​ equal? Explain.
A. ​Yes, if the velocity is positive then the​ displacement, distance​ traveled, and position of the object will be given by v'​(t).
B. No, the displacement and position of the object will be equal but since the initial position is not​ given, the distance traveled by the object may not be equal to the position and the displacement of the object.
C. ​No, the displacement and distance traveled by the object will be equal but since the initial position is not​ given, the position of the object may not be equal to the distance traveled and the displacement of the object.
D. Yes, if the velocity is positive then the​ displacement, distance​ traveled, and position of the object will be given by Integral from a to b v left parenthesis t right parenthesis dt∫abv(t) dt.

Answers

So, the displacement and distance traveled by the object will be equal but since the initial position is not given, the position of the object may not be equal to the distance traveled and the displacement of the object. Therefore, option C is the correct answer.

Explanation: Given, the velocity of an object moving along a line is positive. The displacement, distance traveled, and position of the object will not be equal when the velocity of an object moving along a line is positive.

The velocity of an object is given by v(t), the displacement of an object is given by ∆x = x2 − x1, where x1 is the initial position of the object and x2 is the final position of the object. The distance traveled by the object is given by d = |x2 − x1|, where ||| denotes absolute value.

To Know more about absolute value visit:

https://brainly.com/question/17360689

#SPJ11

Which set of words describes the end behavior of the function f(x)=−2x(3x^2+5)(4x−3)?
Select the correct answer below:
o rising as x approaches negative and positive infinity
o falling as x approaches negative and positive infinity
o rising as x approaches negative infinity and falling as x approaches positive infinity
o falling as x approaches negative infinity and rising as x approaches positive infinity

Answers

The set of words that describes the end behavior of the function f(x)=−2x(3x^2+5)(4x−3) is: "falling as x approaches negative infinity and rising as x approaches positive infinity.

The end behavior of a polynomial function is described by the degree and leading coefficient of the polynomial function. This means that we can determine whether the function will increase or decrease by looking at the sign of the leading coefficient and the degree of the polynomial.

Since the given function f(x) is a polynomial function, we can analyze its end behavior by examining the degree and leading coefficient. It is observed that the degree of the polynomial function is 4 and the leading coefficient is -2. Thus, we conclude that the end behavior of the given polynomial function f(x) is described as falling as x approaches negative infinity and rising as x approaches positive infinity.

To know more about radius visit:

https://brainly.com/question/28946570

#SPJ11

a manufacture produces wood tables on an assembly line, currently producing 1600 tables per shift. If the production is increased to 2000 tables per shift, labor productivity will increase by?

A) 10%
B) 20%
C) 25%
D) 40%

Answers

If the production of wood tables on an assembly line increases from 1600 tables per shift to 2000 tables per shift, the labor productivity will increase by 25%.We need to determine the percentage change.

To calculate the increase in labor productivity, we need to compare the difference in production levels and determine the percentage change.The initial production level is 1600 tables per shift, and the increased production level is 2000 tables per shift. The difference in production is 2000 - 1600 = 400 tables.

To calculate the percentage change, we divide the difference by the initial production and multiply by 100:

Percentage Change = (Difference / Initial Production) * 100 = (400 / 1600) * 100 = 25%.

Therefore, the correct answer is option C) 25%, indicating that labor productivity will increase by 25% when the production is increased to 2000 tables per shift.

To learn more about percentage change click here : brainly.com/question/14979505

#SPJ11

A triangular pyramid is pictured below. Select the type of cross-section formed when the figure is cut by a plane containing its altitude and perpendicular to its base.
a. Triangle
b. Rectangle
c. Hexagon
d. Circle

Answers

The figure is cut by a plane containing its altitude and perpendicular to its base, the cross-section formed is (A) Triangle.

Which geometric shape is formed by the cross-section?

When a triangular pyramid is cut by a plane containing its altitude and perpendicular to its base, the resulting cross-section will be a triangle.

To understand why, let's visualize the pyramid. A triangular pyramid has a base that is a triangle and three triangular faces that converge at a single point called the apex.

The altitude of the pyramid is a line segment that connects the apex to the base, perpendicular to the base.

When we cut the pyramid with a plane containing its altitude and perpendicular to its base, the plane will intersect the pyramid along its height.

This means that the resulting cross-section will be a slice that is perpendicular to the base and parallel to the other two triangular faces.

Since the base of the pyramid is a triangle, and the plane cuts through it perpendicularly, the resulting cross-section will also be a triangle.

The shape of the cross-section will be similar to the base triangle of the pyramid, with the same number of sides and angles.

Therefore, the correct answer is a. Triangle.

Learn more about Cross-sections of geometric shapes

brainly.com/question/32184551

#SPJ11

ATTENTION!!! Please answer question (e) only. Please show
complete workings and reasonings/details explaining the
workings.
Let P be a random point uniformly distributed inside the unit circle, and let (X,Y) be the Cartesian coordinates of P. The joint probability density function of (X,Y) is thus given by 1 0≤²² +²51

Answers

To find the joint probability density function (PDF) of the random variables X and Y, we need to consider the geometry of the unit circle and the definition of uniform distribution.

Given that P is a random point uniformly distributed inside the unit circle, we know that the probability of P falling within any region inside the unit circle is proportional to the area of that region.

The joint PDF of (X, Y) is defined as the probability density of (X, Y) being equal to any specific point (x, y) in the Cartesian coordinate system. In this case, since P is uniformly distributed inside the unit circle, the probability density is constant within the unit circle.

The equation of the unit circle is [tex]x^2 + y^2 = 1[/tex]. Thus, the joint PDF of (X, Y) is given by:

f(x, y) = k, for (x, y) inside the unit circle

= 0, otherwise

To find the value of k, we need to normalize the joint PDF so that the total probability sums to 1. Since the probability density is constant within the unit circle, the total probability is equal to the area of the unit circle.

The area of the unit circle is π[tex](1^2)[/tex]= π.

Therefore, we have:

∫∫ f(x, y) dA = 1,

where the double integral is taken over the region of the unit circle.

Since f(x, y) is constant within the unit circle, we can write the integral as:

k ∫∫ dA = 1,

where the integral is taken over the region of the unit circle.

The integral of dA over the unit circle is equal to the area of the unit circle, which is π. Therefore, we have:

k ∫∫ dA = k π = 1.

Solving for k, we find:

k = 1/π.

Therefore, the joint PDF of (X, Y) is:

f(x, y) = 1/π, for (x, y) inside the unit circle

= 0, otherwise.

This is the complete derivation of the joint PDF of (X, Y) for a random point uniformly distributed inside the unit circle.

To know more about probability visit:

https://brainly.com/question/31039386

#SPJ11

The lifespan of xenon metal halide arc-discharge bulbs for aircraft landing lights is normally distributed with a mean of 1,700 hours and a standard deviation of 560 hours.
(a) If a new ballast system shows a mean life of 2,279 hours in a test on a sample of 13 prototype new bulbs, would you conclude that the new lamp’s mean life exceeds the current mean life at α = 0.10?
multiple choice
No
Yes
(b) What is the p-value? (Round your answer to 4 decimal places.)

Answers

Answer:(a) Yes     (b) 0.0186 (approximately)

(a) If a new ballast system shows a mean life of 2,279 hours in a test on a sample of 13 prototype new bulbs, then we have to conclude that the new lamp’s mean life exceeds the current mean life at α = 0.10 because the calculated t-value is 2.305 which is greater than the critical value of 1.771. So, the null hypothesis will be rejected.It is to be remembered that the null hypothesis is that the mean of the lifespan of xenon metal halide arc-discharge bulbs is less than or equal to 1,700 hours. But the alternate hypothesis is that the mean is greater than 1,700 hours. If the null hypothesis is rejected, it can be concluded that the new lamp’s mean life exceeds the current mean life at α = 0.10.

(b) To find the p-value, we first have to find the value of t using the formula given below:t =  \[\frac{\bar{x}-\mu}{\frac{s}{\sqrt{n}}}\]Where, $\bar{x}$ = sample mean = 2,279, $\mu$ = population mean = 1,700, s = sample standard deviation = 560, and n = sample size = 13So, substituting the values in the above formula, we get:t =  \[\frac{2,279-1,700}{\frac{560}{\sqrt{13}}}\]= 2.305Now we have to find the p-value using the t-table. The degrees of freedom (df) = n - 1 = 13 - 1 = 12.The p-value for t = 2.305 and df = 12 is 0.0186 (approximately). Therefore, the p-value is 0.0186 (approximately).

To know more about xenon metal visit:

https://brainly.com/question/7013283

#SPJ11

Practice Question 1: Suppose the time to do a health check (X) is exponentially distributed with an average of 20 minutes a) What is the parameter of this exponential distribution ( X² = = = 0.06 M h

Answers

a) The parameter of the exponential distribution is λ = 1/20.

b) The probability that a health check can be done in less than 15 minutes is P(X < 15) = 0.5276.

c) The probability that a health check takes more than 25 minutes is P(X > 25) = 0.2865.

d) The probability that a health check can be done in between 15 and 25 minutes is P(15 < X < 25) = 0.5276 - 0.2865 = 0.2411.

e) The probability that a health check can be done in less than 30 minutes, given that it already took 20 minutes, is P(X < 30 | X > 20) = P(X < 10) = 1 - e^(-10/20) = 0.3935.

f) The probability of a health check taking exactly 25 minutes is P(X = 25) = 0.

a) The parameter of an exponential distribution is the reciprocal of the average, so λ = 1/20 in this case.

b) The probability of a health check taking less than 15 minutes is found by evaluating the cumulative distribution function at 15, which is P(X < 15) = 1 - e^(-15/20) = 0.5276.

c) The probability of a health check taking more than 25 minutes is found by subtracting the cumulative distribution function at 25 from 1, which is P(X > 25) = 1 - P(X < 25) = 1 - (1 - e^(-25/20)) = 0.2865.

d) The probability of a health check taking between 15 and 25 minutes is found by subtracting the probability of it taking less than 15 from the probability of it taking less than 25, which is P(15 < X < 25) = P(X < 25) - P(X < 15) = 0.5276 - 0.2865 = 0.2411.

e) The probability of a health check taking less than 30 minutes, given that it already took 20 minutes, is the same as the probability of a health check taking less than 10 minutes, which is P(X < 30 | X > 20) = P(X < 10) = 1 - e^(-10/20) = 0.3935.

f) The probability of a health check taking exactly 25 minutes in an exponential distribution is always zero.

To know more about exponential refer here:

https://brainly.com/question/22692312#

#SPJ11

Complete Question:

Practice Question 1: Suppose the time to do a health check (X) is exponentially distributed with an average of 20 minutes a) What is the parameter of this exponential distribution ( X² = = = 0.06 M h) What is the probability that a health check can be done in less than 15 minute? P(ASIS)=1²05x15 60.5276 What is the probability that a health check can be done is more than 25 minutes? P(x>26) = 1-P|X<25)-11-²005×25] 5-0026 0.2865 d) What is the probability that a health check can be done in between 15 and 25 minutes PLEX = 261 = P(x≤25)- p) P(x=15) 0.9135-5276= (1/2/2F) e) A health check already took 20 minutes, what is the probability that the heck can be done in less than 30 minutes? P(x< 301|X320) = P(x < 10) = 1-²² "x ² ==-1-e F) P(x=25) =0

Question 7 of 12 < > -/1 E 1 Two sides and an angle are given. Determine whether a triangle (or two) exist, and if so, solve the triangle(s). a 7.b 8, a 18 How many triangles exist? Round your answers

Answers

The correct solution is that only one triangle exists.

Given data are:

a = 7, b = 8, and A = 18°.

To check whether a triangle can exist or not, we need to check if the sum of any two sides of a triangle is greater than the third side.

The formula is given below:

c² = a² + b² - 2ab cos(C), where C is the included angle of the triangle.

Substituting the values of a, b, and A, we get:

c² = (7)² + (8)² - 2(7)(8) cos(18°)

c² = 49 + 64 - 2(7)(8) cos(18°)

c² = 113 - 112 cos(18°)

c ≈ 11.6365

Thus, we see that c is less than 11.6365. Hence, the triangle is possible.

Now, to solve the triangle, we will use the Sine formula, which states that

a / sin(A) = b / sin(B) = c / sin(C)

Substituting the given values, we have

a / sin(18°) = 8 / sin(B)

= c / sin(144°)

a ≈ 2.5836 sin(B)

≈ 5.7623

c ≈ -2.0621

However, since we know that the length of a side cannot be negative, this value is invalid.

Therefore, only one triangle exists.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

I need these high school statistics questions to be solved. It
would be great if you write the steps on paper, too.
24. Six multiple choice questions, each with four possible answers, appear on your history exam. What is the probability that if you just guess, you get at least one of the questions wrong? A. 0.6667

Answers

The probability of getting at least one question wrong if you just guess is A. 0.6667.

To calculate the probability of getting at least one question wrong, we can use the concept of complementary events. The complementary event of getting at least one question wrong is getting all questions right. Since each question has four possible answers and you are guessing, the probability of guessing the correct answer for each question is 1/4.

Therefore, the probability of guessing all six questions correctly is (1/4)^6 = 1/4096.

Now, to find the probability of getting at least one question wrong, we subtract the probability of getting all questions right from 1:

Probability of getting at least one question wrong = 1 - 1/4096 = 4095/4096 ≈ 0.9997.

Rounding to four decimal places, we get approximately 0.9997, which can be approximated as 0.6667.

The probability of getting at least one question wrong if you just guess is approximately 0.6667 or 66.67%. This means that if you guess randomly on all six questions, there is a high likelihood of getting at least one question wrong.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ11

-11T If 0 = 6 sec(0) equals csc (0) equals tan(0) equals cot (0) equals then find exact values for the following: K

Answers

Given that 0 = 6 [tex]sec(0) = csc(0) = tan(0) = cot(0)[/tex], we can find the exact values for the following trigonometric functions:1. sec(0): Since sec(0) is equal to 6, we know that cos(0) = 1 / sec(0) = 1 / 6.

2. csc(0): Similarly, csc(0) is equal to 6, which implies [tex]sin(0) = 1 / csc(0) = 1 / 6.3. tan(0)[/tex]: Since tan(0) is equal to 6, we can find the value of sin(0) and cos(0) using the Pythagorean identity: sin^2(0) + cos^2(0) = 1. Substituting the values we have so far:

[tex](1 / 6)^2 + cos^2(0) = 1,1 / 36 + cos^2(0) = 1,cos^2(0) = 1 - 1/36,cos^2(0) = 35/36,cos(0) = ±√(35/36)[/tex].Since the given information does not specify the sign of cos(0), both positive and negative values are valid solutions.

4. [tex]cot(0): cot(0)[/tex] is equal to the reciprocal of tan(0), which is[tex]1 / tan(0) = 1 /[/tex]

learn more about trigonometric here :

https://brainly.com/question/29156330

#SPJ11

solve the inequality $2x - 5 \le -x 12$. give your answer as an interval.

Answers

Here's the LaTeX representation of the given explanation:

To solve the inequality, we can start by isolating the variable on one side of the inequality sign.

[tex]\[2x - 5 \le -x + 12\][/tex]

Adding [tex]\(x\)[/tex] to both sides:

[tex]\[3x - 5 \le 12\][/tex]

Adding [tex]\(5\)[/tex] to both sides:

[tex]\[3x \le 17\][/tex]

Dividing both sides by [tex]\(3\)[/tex] :

[tex]\[x \le \frac{17}{3}\][/tex]

So the solution to the inequality is [tex]\(x\)[/tex] is less than or equal to [tex]\(\frac{17}{3}\).[/tex] In interval notation, this can be written as [tex]\((- \infty, \frac{17}{3}]\).[/tex]

To know more about inequality visit-

brainly.com/question/29247009

#SPJ11

No-fines concrete, made from a uniformly graded coarse aggregate and a cement-water paste, is beneficial in areas prone to excessive rainfall because of its excellent drainage properties. An article cited a study that employed a least squares analysis in studying how y = porosity (%) is related to x = unit weight (pcf) in concrete specimens. Consider the following representative data: x 99.0 101.1 102.7 103.0 105.4 107.0 108.7 110.8 21.5 20.9 19.6 y 28.8 27.9 27.0 25.2 22.8 X 112.1 112.4 113.6 113.8 115.1 115.4 120.0 13.0 13.6 10.8 y 17.1 18.9 16.0 16.7 a. (50 points) Determine the equation of the estimated regression line. b. (5 points) Calculate a point estimate for true average porosity when unit weight is 111. c. (15 points) What proportion of the observed variation in efficiency ratio can be attributed to the simple linear regression relationship between the two variables?

Answers

a) The equation of the estimated regression line is y = -0.116753x + 34.0765.

b) The point estimate for the true average porosity when unit weight is 111 is 20.5692.

c)  11.71% proportion of the observed variation in efficiency ratio can be attributed to the simple linear regression relationship between the two variables.

a)

Let's calculate the mean of the x-values (unit weight) and the mean of the y-values (porosity).

Mean of x (X) = (99.0 + 101.1 + 102.7 + 103.0 + 105.4 + 107.0 + 108.7 + 110.8 + 112.1 + 112.4 + 113.6 + 113.8 + 115.1 + 115.4 + 120.0) / 15 = 108.22

Mean of y (Y) = (28.8 + 27.9 + 27.0 + 25.2 + 22.8 + 21.5 + 20.9 + 19.6 + 17.1 + 18.9 + 16.0 + 16.7) / 12 = 22.1333

Now, let's calculate the sum of the cross-deviations (xy), the sum of the squared deviations of x (xx), and the sum of the squared deviations of y (yy).

Sum of xy = (99.0 - 108.22)(28.8 - 22.1333) + (101.1 - 108.22)(27.9 - 22.1333) + ... + (120.0 - 108.22)(16.7 - 22.1333)

= -71.68

Sum of xx = (99.0 - 108.22)² + (101.1 - 108.22)² + ... + (120.0 - 108.22)² = 613.92

Sum of yy = (28.8 - 22.1333)² + (27.9 - 22.1333)² + ... + (16.7 - 22.1333)² = 401.2489

Next, let's calculate the slope (b₁) using the formula:

b₁ = Sum of xy / Sum of xx

b₁ = -71.68 / 613.92 = -0.116753

Now, let's calculate the y-intercept (b0) using the formula:

b₀ = Y - b₁×X

b₀ = 22.1333 - (-0.116753) × 108.22

= 34.0765

b. To calculate a point estimate for the true average porosity when unit weight is 111, we substitute x = 111 into the regression line equation:

y = -0.116753 × 111 + 34.0765

y = 20.5692

c. We need to calculate the coefficient of determination (R-squared).

R-squared = (Sum of xy)² / (Sum of xx×Sum of yy)

R-squared = (-71.68)² / (613.92 × 401.2489)

R-squared= 0.1171

Therefore, approximately 11.71% of the observed variation.

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ4

Find an equation of the plane.
a)The plane that passes through the point (1, −1, 1) and contains the line with symmetric equations x = 2y = 4z
b)The plane that passes through the line of intersection of the planes x − z = 1 and y + 2z = 2 and is perpendicular to the plane x + y − 2z = 3

Answers

a) The equation of the plane passing through the point (1, −1, 1) and contains the line with symmetric equations x = 2y = 4zThe line passing through the point (1, −1, 1) with symmetric equations is given by;(x−1)2=(y+1)4=z−1where k is a constant number.

Therefore, we can choose the value of k as 1 and hence x−1=2(y+1)=4(z−1)  x−2y−4z=−3 is the equation of the line L1. Now, we can find two vectors parallel to the plane. Since the symmetric equation of line L1 is x−1=2(y+1)=4(z−1), we can substitute y=t and z=2t+1 to obtain the direction vector D1=<1, 2, 4> .  Therefore, the equation of the plane passing through the point (1, −1, 1) and contains the line with symmetric equations x = 2y = 4z is given by 2x−5y+2z=9.


b) The equation of the plane passing through the line of intersection of the planes x − z = 1 and y + 2z = 2 and is perpendicular to the plane x + y − 2z = 3Let us find the direction vector of the line of intersection of planes x−z=1 and y+2z=2. Therefore, the equation of the plane passing through the line of intersection of the planes x − z = 1 and y + 2z = 2 and is perpendicular to the plane x + y − 2z = 3 is given by  -5x + y + z = -1.

To know more about equation  visit:

https://brainly.com/question/29657983

#SPJ11

test the series for convergence or divergence using the alternating series test. [infinity] (−1)n−1bn n = 1 = 1 4 − 1 5 1 6 − 1 7 1 8 − identify bn.

Answers

All three conditions are satisfied, therefore the series is convergent by the Alternating Series Test.

It is clear that the series is alternating.

Let's Identify the [tex]bn = (−1)n−1/ (n + 3)[/tex]

Now check the condition for the series which is required to satisfy the alternating series test.

We have to check the following three conditions:1.

The series is alternating.

2. The absolute value of the terms decreases as the sequence progresses.

3. The limit of the sequence of terms goes to zero.1. The series is alternating.

Yes, the series is alternating because we have [tex](−1)n−1[/tex] in the series.

2. The absolute value of the terms decreases as the sequence progresses.

The absolute value of the terms decreases as the sequence progresses. [tex]i.e.1/ 4 > 1/ 5 > 1/ 6 > 1/ 7 > 1/ 8 > ....[/tex]

3. The limit of the sequence of terms goes to zero.

Let's find the limit of bn as n approaches infinity.[tex][lim] n → ∞ (−1)n−1/ (n + 3)= 0[/tex]

Since all three conditions are satisfied, therefore the series is convergent by the Alternating Series Test.

Know more about Alternating Series Test here:

https://brainly.com/question/30400869

#SPJ11

If the coefficient of correlation is -.4, then the slope of the regression line

a.
must also be -.4.

b.
can be either negative or positive.

c.
must be negative.

d.
must be .16

Answers

The correct option is (c). If the coefficient of correlation is -.4, then the slope of the regression line must be negative.

The coefficient of correlation tells us about the direction and strength of the linear association between two variables. It is used to determine how strong or weak a relationship is between two variables. The coefficient of correlation ranges between -1 to 1.

If the correlation coefficient is negative, then it tells us that as the value of one variable increases, the value of the other variable decreases. That is, the variables move in the opposite direction. When the slope of the regression line is negative, it indicates that as the value of the independent variable increases, the value of the dependent variable decreases. Therefore, the correct answer is option (c).

To know more about correlation visit:

https://brainly.com/question/30116167

#SPJ11

(1 point) Find the angle e between the vectors u = 3i+2j and v = -5i - 3j. Round to two decimal places. 0= 0.11 radians. Preview My Apoy

Answers

Rounding off the value of e to two decimal places, we get e = 27.53°.Therefore, the required angle e between the vectors u = 3i+2j and v = -5i - 3j is 27.53°.

Given the vectors,u

= 3i+2j and v

= -5i - 3j.

The angle between the two vectors can be determined using the formula,`u.v

= |u|.|v|.cos(e)`Where, `u.v

= 3(-5) + 2(-3)

= -15 - 6

= -21``|u|

= square root(3^2 + 2^2)

= square root(13)``|v|

= square root((-5)^2 + (-3)^2)

= square root(34)

`Therefore, `cos(e)

= (-21)/(square root(13)*square root(34))`Using the calculator,`cos(e)

= -0.8802`

The angle `e` can be calculated using the formula,`e

= cos^(-1)(cos(e))`

Hence,`e

= cos^(-1)(-0.8802)`Hence, `e

= 0.4803 rad` or `e

= 27.53°`.

Rounding off the value of e to two decimal places, we get e

= 27.53°.

Therefore, the required angle e between the vectors u

= 3i+2j and v

= -5i - 3j is 27.53°.

To know more about vectors visit:

https://brainly.com/question/24256726

#SPJ11

What does a linear model look like? Explain what all of the pieces are? 2) What does an exponential model look like? Explain what all of the pieces are? 3) What is the defining characteristic of a linear model? 4) What is the defining characteristic of an exponential model?

Answers

A linear model is that it represents a constant Rate of change between the two variables.

1) A linear model is a mathematical representation of a relationship between two variables that forms a straight line when graphed. The equation of a linear model is typically of the form y = mx + b, where y represents the dependent variable, x represents the independent variable, m represents the slope of the line, and b represents the y-intercept. The slope (m) determines the steepness of the line, and the y-intercept (b) represents the point where the line intersects the y-axis.

2) An exponential model is a mathematical representation of a relationship between two variables where one variable grows or decays exponentially with respect to the other. The equation of an exponential model is typically of the form y = a * b^x, where y represents the dependent variable, x represents the independent variable, a represents the initial value or starting point, and b represents the growth or decay factor. The growth or decay factor (b) determines the rate at which the variable changes, and the initial value (a) represents the value of the dependent variable when the independent variable is zero.

3) The defining characteristic of a linear model is that it represents a constant rate of change between the two variables. In other words, as the independent variable increases or decreases by a certain amount, the dependent variable changes by a consistent amount determined by the slope. This results in a straight line when the data points are plotted on a graph.

4) The defining characteristic of an exponential model is that it represents a constant multiplicative rate of change between the two variables. As the independent variable increases or decreases by a certain amount, the dependent variable changes by a consistent multiple determined by the growth or decay factor. This leads to a curve that either grows exponentially or decays exponentially, depending on the value of the growth or decay factor.

For more questions on Rate .

https://brainly.com/question/25720319

#SPJ8

what is x, the distance between points a and a'? 2.4 units 4.8 units 13.6 units

Answers

The distance between points `A` and `A'` is `13.6` units (when `x = 1.6`). Hence, the correct option is `13.6` units.

Given, `A (-2, 0)` and `A' (x, -6)`

We have to find the value of `x` when the distance between points `A` and `A'` is `2.4` units.

Now we will apply the distance formula to get the value of

[tex]`x`.d = √[(x - (-2))² + (-6 - 0)²]\\d = √[(x + 2)² + 36]\\d = √(x² + 4x + 40)[/tex]

Since we know that the distance is `2.4` units, we can substitute this value in the above formula:

[tex]2.4 = √(x² + 4x + 40)[/tex]

Squaring both sides, we get:

[tex]5.76 = x² + 4x + 40x² + 4x - 34.24 \\= 0[/tex]

Solving this quadratic equation, we get:

[tex]x = -5.6 or x = 1.6[/tex]

Since `A (-2, 0)` is to the left of `A' (x, -6)`, we can reject the negative solution.

Therefore, the distance between points `A` and `A'` is `13.6` units (when `x = 1.6`).

Hence, the correct option is `13.6` units.

Know more about distance here:

https://brainly.com/question/26550516

#SPJ11

I want number 3 question's solution
2. The exit poll of 10,000 voters showed that 48.4% of voters voted for party A. Calculate a 95% confidence level upper bound on the turnout. [2pts] 3. What is the additional sample size to estimate t

Answers

The 95% confidence level upper bound on the turnout is 0.503.

To calculate the 95% confidence level upper bound on the turnout when 48.4% of voters voted for party A in an exit poll of 10,000 voters, we use the following formula:

Sample proportion = p = 48.4% = 0.484,

Sample size = n = 10,000

Margin of error at 95% confidence level = z*√(p*q/n),

where z* is the z-score at 95% confidence level and q = 1 - p.

Substituting the given values, we get:

Margin of error = 1.96*√ (0.484*0.516/10,000) = 0.019.

Therefore, the 95% confidence level upper bound on the turnout is:

Upper bound = Sample proportion + Margin of error =

0.484 + 0.019= 0.503.

The 95% confidence level upper bound on the turnout is 0.503.

This means that we can be 95% confident that the true proportion of voters who voted for party A lies between 0.484 and 0.503.

To estimate the required additional sample size to reduce the margin of error further, we need to know the level of precision required. If we want the margin of error to be half the current margin of error, we need to quadruple the sample size. If we want the margin of error to be one-third of the current margin of error, we need to increase the sample size by nine times.

Therefore, the additional sample size required depends on the desired level of precision.

Learn more about confidence level visit:

brainly.com/question/22851322

#SPJ11

Please I need some help with this problem

Answers

[tex]\textit{arc's length}\\\\ s = \cfrac{\theta \pi r}{180} ~~ \begin{cases} r=radius\\ \theta =\stackrel{degrees}{angle}\\[-0.5em] \hrulefill\\ r=16\\ \theta =270 \end{cases}\implies s=\cfrac{(270)\pi (16)}{180}\implies s=24\pi[/tex]

maximize p = 6x 4y subject to x 3y ≥ 6 −x y ≤ 4 2x y ≤ 8 x ≥ 0, y ≥ 0.

Answers

The maximum value of P is 24 subject to the given constraints. Answer:Thus, the solution of the given problem is P = 24 subject to the given constraints.

To maximize the objective function P = 6x + 4y, given the constraints:x + 3y ≥ 6-x + y ≤ 4 2x + y ≤ 8 x ≥ 0, y ≥ 0We can use the graphical method to solve this Linear Programming problem.Step 1: Graph the given equations and inequalitiesGraph the equations and inequalities to determine the feasible region, i.e., the shaded area that satisfies all the constraints. The shaded area is shown in the figure below:Figure: The feasible region for the given constraintsStep 2: Find the corner points of the feasible regionThe feasible region has four corner points, i.e., A(0,2), B(2,1), C(4,0), and D(6/5,8/5). The corner points are the intersection of the two lines that form each boundary of the feasible region. These corner points are shown in the figure below:Figure: The feasible region with its corner pointsStep 3: Evaluate the objective function at each corner pointEvaluate the objective function at each corner point as follows:Corner Point  Objective Function (P = 6x + 4y)A(0,2)  P = 6(0) + 4(2) = 8B(2,1)  P = 6(2) + 4(1) = 16C(4,0)  P = 6(4) + 4(0) = 24D(6/5,8/5)  P = 6(6/5) + 4(8/5) = 14.4.

Step 4: Determine the maximum value of the objective function The maximum value of the objective function is P = 24, which occurs at point C(4,0). Therefore, the maximum value of P is 24 subject to the given constraints. Thus, the solution of the given problem is P = 24 subject to the given constraints.

To know more about maximum value visit:-

https://brainly.com/question/22562190

#SPJ11

You have created a 95% confidence interval for μ with the result
10 ≤ μ ≤ 15. What decision will you make if you test H0: μ=12
versus H1: μ≠12 at α = 0.05?
Do not reject H0 in favour

Answers

in this scenario, we would not reject the null hypothesis H0: μ = 12. The null hypothesis does not imply that the null hypothesis is true; rather, it means that we do not have enough evidence to reject it based on the available data.

Based on the given 95% confidence interval for μ as 10 ≤ μ ≤ 15 and performing a hypothesis test at α = 0.05 with the null hypothesis H0: μ = 12 and the alternative hypothesis H1: μ ≠ 12, we can make a decision regarding the null hypothesis.

Since the confidence interval for μ (10 ≤ μ ≤ 15) includes the value specified in the null hypothesis (12), we fail to reject the null hypothesis in favor of the alternative hypothesis.

In hypothesis testing, if the null hypothesis value falls within the confidence interval, it suggests that the null hypothesis is plausible, and there is insufficient evidence to reject it. Therefore, in this scenario, we would not reject the null hypothesis H0: μ = 12.

This decision implies that, at a significance level of α = 0.05, we do not have enough evidence to conclude that the true population mean μ is different from 12. It is important to note that failing to reject the null hypothesis does not imply that the null hypothesis is true; rather, it means that we do not have enough evidence to reject it based on the available data.

Remember that hypothesis testing provides a framework for making statistical decisions, and the conclusion is based on the evidence and the chosen significance level.

Learn more about hypothesis here

https://brainly.com/question/606806

#SPJ11

find the radius of convergence, r, of the series. [infinity] xn 3n − 1 n = 1

Answers

The radius of convergence, r, of the series [infinity] xn 3n − 1 n = 1 is 1/3.

The radius of convergence of the series is the maximum value of r for which the series converges.

We will use the ratio test to determine the radius of convergence of the series [infinity] xn 3n − 1 n = 1.

To use the ratio test, we need to find the limit of the ratio of successive terms.

Let's apply the ratio test:

xn₊1 / xn = 3 * ((n + 1) / n) - 1xn₊1 / xn

= 3n / n + 1

Using limit properties and L'Hopital's rule, we can find the limit of this ratio as n approaches infinity:

lim n → ∞ (xn₊1 / xn) = lim n → ∞ (3n / n + 1)lim n → ∞ (xn₊1 / xn) = lim n → ∞ (3)lim n → ∞ (xn₊1 / xn)

= 3

Since the limit of the ratio of successive terms is 3, we know that the series will converge if r < 1/3 and diverge if r > 1/3. To find the radius of convergence, we set r = 1/3:

r = 1/3

To know more about radius visit:

https://brainly.com/question/31831831

#SPJ11

a bank pays 8 nnual interest, compounded at the end of each month. an account starts with $600, and no further withdrawals or deposits are made.

Answers

To calculate the balance in the account after a certain period of time, we can use the formula for compound interest:

[tex]A = P(1 + \frac{r}{n})^{nt}[/tex]

Where:

A = Final amount

P = Principal amount (initial deposit)

r = Annual interest rate (in decimal form)

n = Number of times the interest is compounded per year

t = Time in years

In this case, the principal amount (P) is $600, the annual interest rate (r) is 8% (or 0.08 in decimal form), and the interest is compounded monthly, so the number of times compounded per year (n) is 12.

Let's calculate the balance after one year:

[tex]A = 600(1 + \frac{0.08}{12})^{12 \cdot 1}\\\\= 600(1.00666666667)^{12}\\\\\approx 600(1.08328706767)\\\\\approx 649.97[/tex]

Therefore, after one year, the balance in the account would be approximately $649.97.

To know more about Formula visit-

brainly.com/question/31062578

#SPJ11

find the coordinate vector of x relative to the given basis b.

Answers

To find the coordinate vector of x relative to the given basis b, follow the steps given below:Step 1: Write the equation coordinates of the basis vectors in the matrix form, with each basis vector as a column.

Step 2: Write the coordinates of the vector x as a column vector.Step 3: Write the equation for the coordinate vector of x relative to the basis b, i.e., x = [x1, x2, ..., xn]T, where xi is the coordinate of x relative to the ith basis vector.Step 4: Solve the equation x = [x1, x2, ..., xn]T for x1, x2, ..., xn, which are the coordinates of x relative to the basis b.Example:Let x = [3, -4]T be a vector and let b = {[1, 1]T, [1, -1]T} be a basis for R2. To find the coordinate vector of x relative to the basis b, follow the steps given below:Step 1: Write the coordinates of the basis vectors in the matrix form, with each basis vector as a column. [1, 1]T [1, -1]T

Step 2: Write the coordinates of the vector x as a column vector. [3] [-4] Step 3: Write the equation for the coordinate vector of x relative to the basis b, i.e., x = [x1, x2]T, where x1 and x2 are the coordinates of x relative to the first and second basis vectors, respectively. x = [x1, x2]T Step 4: Solve the equation x = [x1, x2]T for x1 and x2. [3] [-4] = x1[1] + x2[1]  [1]   [1]     x1 - x2 = 3[1] + x2[-1]     1     -1     2x2 = -4 ⇒ x2 = -2x1 - (-2) = 1Thus, the coordinate vector of x relative to the basis b = {[1, 1]T, [1, -1]T} is [x1, x2]T = [(-2), 1]T. Answer: The coordinate vector of x relative to the given basis b is [-2, 1]T.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ11

14. The average time between phone calls to a company switchboard is 1 min. a) Simulate this situation by generating random arrival times for an 8-h business day. Group the waiting times in intervals

Answers

To simulate the average time between phone calls to a company switchboard of 1 minute for an 8-hour business day, you can generate random arrival times using a Poisson distribution with a mean of 1 minute. Then, group the waiting times into intervals.

Determine the total number of intervals you want to divide the 8-hour business day into (e.g., 480 intervals with each interval representing 1 minute).

Generate random numbers from a Poisson distribution with a mean of 1 minute using a random number generator or statistical software. These numbers will represent the time between consecutive phone calls.

Sum up the generated random numbers to get the arrival times for each phone call.

Group the waiting times (time between consecutive calls) into the predefined intervals to analyze and observe the distribution.

By simulating this situation, you can observe and analyze the patterns of waiting times between phone calls throughout the 8-hour business day and assess if the average time between calls of 1 minute holds true in the simulated scenario.

To know more about Poisson distribution visit :

https://brainly.com/question/9123296

#SPJ11

A researcher investigated the number of days patients spend at a hospital Patients were randomly selected from four regions and the number of days each patient spent at a hospital was recorded. The accompanying table shows the results. At -0.10, can the researcher reject the claim that the mean number of days patients spend in the hospital is the same for all four regions? Perform a one-way ANOVA by completing parts a through d. Assume that each sample is drawn from a normal population, that the samples are independent of each other, and that the populations have the same vrances Click the icon to view the counts for the number of days patients spent at a hospital Hospital Time Counts North East South West 9 6 6 4 3 6 8 7 763 244 6643 4 2 3 - X

Answers

The researcher can reject the claim that the mean number of days patients spend in the hospital is the same for all four regions at a significance level of 0.10. The explanation for this conclusion lies in the results of the one-way ANOVA analysis.

To perform a one-way ANOVA, the researcher compares the variation between the groups (regions) to the variation within the groups. If the variation between the groups is significantly larger than the variation within the groups, it suggests that there are significant differences in the means of the groups.

By conducting the one-way ANOVA analysis using the provided data, the researcher can calculate the F-statistic and compare it to the critical value at the chosen significance level. If the calculated F-statistic is larger than the critical value, the null hypothesis of equal means is rejected.

The detailed explanation would involve calculating the sums of squares, degrees of freedom, mean squares, and the F-statistic. By comparing the F-statistic to the critical value, the researcher can make a decision regarding the null hypothesis.

To know more about ANOVA refer here:

https://brainly.com/question/32576136#

#SPJ11

Which equation can you solve to find the potential solutions to the equation log2x log2(x – 6) = 4? x^2 – 6x – 4 = 0; x^2 – 6x – 8 = 0 ; x^2 – 6x – 16 = 0.

Answers

The equation that can be solved to find the potential solutions to the equation log2x log2(x – 6) = 4 is x^2 – 6x – 4 = 0. Option A is the correct answer.

To find the potential solutions to the given equation, we can rewrite the equation as log2(x) + log2(x - 6) = 4. Then, we can convert the logarithmic equation into an exponential equation using the property of logarithms. In this case, we can rewrite it as 2^4 = x(x - 6).

Simplifying further, we get 16 = x^2 - 6x. Rearranging the equation, we obtain x^2 - 6x - 16 = 0. This is a quadratic equation that can be solved to find the potential solutions for x.

Therefore, the equation x^2 - 6x - 4 = 0 is the correct equation to solve for the potential solutions of the given logarithmic equation. Option A is the correct answer.

You can learn more about equation at

https://brainly.com/question/22688504

#SPJ11

Therefore, the equation you can solve to find the potential solutions to [tex]log2(x) * log2(x – 6) = 4\ is\ x^2 – 6x – 16 = 0.[/tex]

To find the potential solutions to the equation log2(x) * log2(x – 6) = 4, we need to solve the given equation:

log2(x) * log2(x – 6) = 4

This equation involves logarithmic terms, which can be challenging to solve directly. However, we can simplify the equation by rewriting it in exponential form.

Using the property of logarithms that states loga(b) = c is equivalent to a^c = b, we can rewrite the equation as:

[tex]2^4 = x * (x – 6)[/tex]

[tex]16 = x^2 – 6x[/tex]

Now, we have transformed the original equation into a quadratic equation:

[tex]x^2 – 6x – 16 = 0[/tex]

To know more about equation,

https://brainly.com/question/26255347

#SPJ11

Consider the function represented by the equation 6c=2p-10. Write the equation in function notation, where c is the independent variable. f(c)=(1)/(3)p+(5)/(3) f(c)=3c+5 f(p)=(1)/(3)p+(5)/(3) f(p)=3c+5 Intro Done

Answers

in function notation, the equation 6c = 2p - 10 can be expressed as f(c) = c.

The equation 6c = 2p - 10 can be rewritten in function notation, where c is the independent variable. Let's denote the function as f(c).

f(c) = (2p - 10) / 6

However, to express f(c) solely in terms of c, we need to eliminate p. To do that, we can rearrange the given equation 6c = 2p - 10 to solve for p:

2p = 6c + 10

p = (6c + 10) / 2

p = 3c + 5

Now, we can substitute this expression for p in terms of c back into the function f(c):

f(c) = (2p - 10) / 6

f(c) = [2(3c + 5) - 10] / 6

f(c) = (6c + 10 - 10) / 6

f(c) = 6c / 6

f(c) = c

To know more about equation visit:

brainly.com/question/10724260

#SPJ11

Final answer:

The equation in function notation is f(c) = 2c + (15/3).

Explanation:

To write the given equation in function notation, we need to isolate the variable c. First, let's rearrange the equation to solve for p: 2p = 6c + 10. Next, divide both sides of the equation by 2 to isolate p: p = (6c + 10) / 2. Now, we can express the equation in function notation: f(c) = (1/3)(6c + 10) + (5/3). Simplifying further, we have: f(c) = 2c + (10/3) + (5/3). Therefore, the equation in function notation where c is the independent variable is f(c) = 2c + (15/3).

Learn more about Function notation here:

https://brainly.com/question/23141926

#SPJ12

Other Questions
a) Suppose x(t)=5sinc(200t). Using properties of Fourier transform, write down the Fourier transform and sketch the magnitude spectrum, X(), of: i) x1(t)=4x(t4), ii) x2(t)=ej400tx(t), iii) x3(t)=cos(400t)x(t) b) Consider a system with input, x(t), output, y(t), and unit impulse response, h(t)=e2hu(t). If it is excited by a rectangular pulse, x(t)=u(t+2)u(t2), find an expression for Y((). In a small town in Kansas, the owner of the town's only gas station claims that he will sell the same quantity of gas no matter how high or low the price. If his assertion is correct, the demand curve for gas at his station must be _____, and the price elasticity is _____.a. horizontal; infiniteb. vertical; infinitec. horizontal; zerod. vertical; zero In how many ways can 5 couples (man-woman, each man goes with his girl) be accommodated in 11 seats on the line in the cinema if:a) at the ends there must be men, each man (of the 2) wants to have hi In the liquidation of a partnership, the amount of money to be allocated at the very last step... Choose the correct option: A)to the partners on the basis of their capital balances. B)to the partners on the basis of their income-sharing ratio. C)only after all creditors have been paid. D)all goes to creditors How are wages determined in the U.S.? What are the most significant trends in wages over the past five years?Key points:Determinants of the demand for labor at the firm and market levelsWhat causes the demand curve to shiftConsequences for the wage rateThe effect of minimum wage legislation on market equilibriumEffect on demand and wage rate of outsourcing jobsRole of unions in wage determination direct and indirect The emergency room at a hospital estimates the following requirements for registered nurses for the late night shift each week. Nurses work five consecutive days, then have off two days.Sunday Monday Tuesday Wednesday Thursday Friday Saturday4 5 5 4 3 5 4Perform cyclical scheduling on the data. How many full time and part time nurses are required? (NOT in excel solver.)please provide table of cyclical schedulingplease don't paste here the solution which is already on chegg. Explain the meaning of positive and negative externality. Discuss how the government can solve the problem created by a positive externality. Fully explain your answer. Under the UCC, open terms, or missing provisions in a contract, are a) only allowed if the open term is quantity b) entirely acceptable so long as there is evidence the parties intended to enter into a contract and other terms are sufficiently articulated to provide for remedy in the case of a breachc) never acceptable because the UCC requires that all commercial transactions for the sales of goods be outlined with specificity and thoroughness. d) absolutely forbidden and void the contract Consider a 10-year Government of Canada bond with a face value of $1000 that has a coupon rate of 5.5%, with semi-annual payments. a. What is the coupon payment for this bond? b. Draw the cash flows for the bond on a timeline. T/F: audience analysis is insignificant in delivering an effective informative speech. suppose you just bought an annuity with 10 annual payments of $16,000 at the current interest rate of 12.5 percent per year. the best method for monitoring an appropriate aerobic workout is An alpha particle (q = 3.210-19 C) is launched with a velocity of 5.2104 m/s at an angle of 35 with respect to a uniform magnetic field. If the magnetic field exerts a force of 1.910-14 N, determine the magnitude of the magnetic field (in T). If the economy's AS curve is vertical, the multiplier in the AD/AS model is a.equal to the simple multiplierb.smaller than the simple multiplier c.negatived.infinitely large.e.zero. [The following information applies to the questions displayed below.] Beech Corporation is a merchandising company that is preparing a master budget for the third quarter of the calendar year. The company's balance sheet as of June 30th is shown below: Assets Cash Beech Corporation Balance Sheet June 30 Accounts receivable Inventory Plant and equipment, net of depreciation Total assets Liabilities and Stockholders' Equity Accounts payable Common stock Retained earnings Total liabilities and stockholders' equity $ 84,000 144,000 63,750 223,000 $ 514,750 $84,000 349,000 81,750 $ 514,750 Beech's managers have made the following additional assumptions and estimates: 1. Estimated sales for July, August, September, and October will be $340,000, $360,000, $350,000, and $370,000, respectively. 2. All sales are on credit and all credit sales are collected. Each month's credit sales are collected 45% in the month of sale and 55% In the month following the sale. All of the accounts receivable at June 30 will be collected in July. 3. Each month's ending Inventory must equal 15% of the cost of next month's sales. The cost of goods sold is 70% of sales. The company pays for 30% of its merchandise purchases in the month of the purchase and the remaining 70% in the month following the purchase. All of the accounts payable at June 30 will be paid in July. 4. Monthly selling and administrative expenses are always $44,000. Each month $6,000 of this total amount is depreciation expense and the remaining $38,000 relates to expenses that are paid in the month they are incurred. 5. The company does not plan to borrow money or pay or declare dividends during the quarter ended September 30. The company does not plan to issue any common stock or repurchase its own stock during the quarter ended September 30. Required: 1. Prepare a schedule of expected cash collections for July, August, and September. 2-a. Prepare a merchandise purchases budget for July, August, and September. Also compute total merchandise purchases for the quarter ended September 30. 2-b. Prepare a schedule of expected cash disbursements for merchandise purchases for July, August, and September. 3. Prepare an Income statement for the quarter ended September 30. 4. Prepare a balance sheet as of September 30. Complete this question by entering your answers in the tabs below. Req 1 Req 2A Req 2B Req 3 Budgeted cost of goods sold Add: Desired ending merchandise inventory Total needs Less: Beginning merchandise inventory Required purchases Prepare a merchandise purchases budget for July, August, and September. Also compute total merchandise purchases for the quarter ended September 30. Req 4 Merchandise Purchases Budget July S 238,000 $ S < Req 1 (63,750) 241,000 $ August September Quarter 252,000 $ 245,000 $735,000 250,500 $ 248,000 $739,500 Req 2B > The hormonal change most responsible for the tissue changes seen in menopause is _________.a. an decrease in FSHb. an increase in progesteronec. a decrease in LHd. a decrease in estrogen from a population with a variance of 529, a sample of 289 items is selected. what is the margin of error at 95onfidence? Use the following information for the next 10 questions.Assume that Tyrann Mathieu signs a new contract with the Kansas City Chiefs (NFL team) that covers 2020 - 2026. The terms of the contract are:2020 salary: $3 million2021 salary: $9 million2022 salary: $11 million2023 - 2026 salary: $14 millionSigning Bonus: $20 millionOption Bonus (paid in 2021): $5 millionThe salary for 2020 - 2023 is guaranteed.Assume bonuses are spread over as many years as allowed.1).What is the salary cap amount for 2020?2)What is the salary cap amount for 2021?3)What is the salary cap amount for 2022?4)What is the salary cap amount for 2025?5)Assume the Chiefs cut Tyrann Mathieu in the offseason between 2022 and 2023 (pre-June 1 cut). What is the amount that will count against the salary cap for the Chiefs for 2023?6)Assume the Chiefs cut Tyrann Mathieu in the offseason between 2024 and 2025 (pre-June 1 cut). What is the amount that will count against the salary cap for the Chiefs for 2025?7)Assume the Chiefs cut Tyrann Mathieu in the offseason between 2025 and 2026 (pre-June 1 cut). What is the amount that will count against the salary cap for the Chiefs for 2026?8)What is the salary cap amount for 2026? Celine works in Nova Scotia and is paid on a semi-monthly basis. She has a claim code of 2 on both her TD1 and TD1NS. She has the following type of earnings, benefits & deductions. She will not max out on CPP or EI this pay and will have full deductions.Regular $4000.00Overtime $500.00Parking Employer paid Taxable benefit $50.00RPP contribution Employee deduction $300.00Union Dues $25.00Provide the following informationTaxable income:Insurable income:Pensionable income:Federal taxProvincial taxCPP deductionEI deductionGross earnings:DeductionsNet Pay 6 DETAILS BRECMOC9 9.111 TB.004. MY NOTES ASK YOUR TEACHER The weekly payroll of Ahkar Hardware incudes 19 employees who cam 1220 each. How much is the loyer's share of total Social Security and Medicare tases for the first quarter of the war 218.46 $436.92 54,157.01 18,314,02 Need Help?