equator runs east and west all the way around the world,halfway between the south poles called the ______________and north poles called________________.

now na po plss....
then follow me☝​

Answer: If a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.

Explanation:

Charles law states that at constant pressure, the volume of a gas is directly proportional to the temperature.

That is, [tex]V \propto T[/tex].

So, when a gas is pumped from a smaller container to a container that is twice the size shows that volume is increasing by 2 times and its pressure is kept the same.

Therefore,

[tex]2V \propto 2T[/tex]

This means that the temperature of the gas will also become twice its initial temperature.

Thus, we can conclude that if a gas is pumped from a smaller container to a container that is twice the size, and its pressure is kept the same, then temperature of the gas increases twice.

Answer:

A typical characteristic of a single-replacement reaction is that there is one element as a reactant and another element as a product. will not because bromine is below fluorine on the periodic table. This is just one of many ways the periodic table helps us understand chemistry.

Explanation:

hope it will help u......

Answer:

any salt

sodium chloride

callcium chloride

potassium chloride

Explanation:

There is no general effect of temperature on the solubility of salts.effect of increase temperature on the solubilty of NaCl is not significant because it is more soluble even at low temperature. The salt like potassium iodide (KI) has negative heat of solution so it's solubility decreases with increase of temperature…

Answer:

true

false

false

true

false

true

true

false

false

true

true

Answer: Dont let the water get inside your private area because it can lead to you washing out the healthy bacteria in your private area !

Explanation:

Also dont do it because you dont know if your water is clean enough for that ..

Answer:.

pharmacies, prescribers, distributors/wholesalers, researchers, manufacturers, hospitals.

Explanation:

The Controlled Substance Act is a federal drug policy of the United States which regulates the manufacture, use, importation and possession and distribution of certain substances. It was enacted by the United States Congress in the year 1971.

Under the Controlled Substance Act, the dispensing of a controlled substance to the use includes pharmacies, prescribers, distributors/wholesalers, researchers, manufacturers, hospitals, etc.

Answer:

agua

Explanation:

por que estamos en la planeta

Answer:

The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).

If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.

So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge

Answer:

cfvgbhnjmk,

Explanation:

Answer:

0.535 atm

Explanation:

Since the volume of the tank is constant, we use Gay- Lussac's law to find the pressure at 180°C.

So, P₁/T₁ = P₂/T₂ where P₁ = pressure at S.T.P = 1 atm, T₁ = temperature at S.T.P = 273.15 K, P₂ = pressure of gas at 180 °C and T₂ = 180 °C = 273.15 + 180 K = 453.15 K

So, P₁/T₁ = P₂/T₂

P₂ = P₁T₂/T₁

Substituting the values of the variables into the equation, we have

P₂ = P₁T₂/T₁

P₂ = 1 atm × 453.15 K/273.15 K

P₂ = 1 atm × 1.66

P₂ = 1.66 atm

We now need to find the total number of moles of each gas present

number of moles of nitrogen = mass of nitrogen, m/molar mass of nitrogen molecule M

n = m/M

m = 2.5 g and M = 2 × atomic mass of nitrogen (since it is diatomic) = 2 × 14 g/mol = 28 g/mol

So, n = 2.5 g/28 g/mol

n = 0.089 mol

number of moles of chlorine, n' = mass of chlorine, m'/molar mass of chlorine molecule M'

n' = m'/M'

m' = 13.3 g and M = 2 × atomic mass of chlorine (since it is diatomic) = 2 × 35.5 g/mol = 71 g/mol

So, n' = 13.3 g/71 g/mol

n' = 0.187 mol

So, the total number of moles of gas present is n" = n + n' = 0.089 mol + 0.187 mol = 0.276 mol

So, the partial pressure due to nitrogen gas, P = mole fraction of nitrogen × pressure of gas at 180 °C

P = n/n" × P₂

P = 0.089 mol/0.276 mol × 1.66 atm

P = 0.322 × 1.66 atm

P = 0.535 atm

Polywool fibre is synthetic.

⇒b. Synthetic

Hope It Helps You ✌️

Answer:

[tex]\large{\underbrace{\underline{\fcolorbox{White}{pink}{\bf{b.synthetic }}}}}

[/tex]

Answer:

option B is the correct answer

Answer:

Answer below (in explanation)

Explanation:

First find the average atomic mass of the element in question (on the periodic table)

Set up the relative abundance formula: (M1)(x) + (M2)(1-x) = M(E)

Where M1 = Mass of the first isotope, X = Relative abundance, M2 = mass of the second isotope, M(E) = Atomic mass of the element

Plug in your values (i'll use nitrogen as an example) :

(background info: The mass of one isotope, nitrogen-14, is 14.003 amu and another isotope, nitrogen-15, is 15.000 amu, find the relative abundance of the isotopes.

14.003x + 15.000(1-x) =14.007

Use algebra and solve for X. First use distributive property, combine like terms, and solve for X.

It would equal X = 0.996. Multiply by 100 to get a proper percentage and the percentage abundance of Nitrogen-14 is 99.6%

This way of solving is limited to 2 isotopes only.

Done

Temperature change

Answer:

[tex]\boxed {\boxed {\sf SO_3}}[/tex]

Explanation:

An empirical formula shows the smallest whole-number ratio of the atoms in a compound.

So, we must calculate this ratio. Since we are given the amounts of the elements in moles, we can do this in just 2 steps.

The first step is division. We divide the amount of moles for both elements by the smallest amount of moles.

There are 0.300 moles of sulfur and 0.900 moles of oxygen. 0.300 is smaller, so we divide both amounts by 0.300

The next step is writing the formula. We use the numbers we just found as the subscripts. These numbers go after the element's symbol in the formula. Remember sulfur is S and there is 1 mole and oxygen is O and there are 3 moles.

This formula is technically correct, but we typically remove subscripts of 1 because no subscript implies 1 representative unit.

[tex]\bold {The \ empirical \ formula \ for \ the \ compound \ is \ SO_3}}[/tex]

Answer:

false, The nucleus of atoms still move around like crazy, it's just the electrons move more.

Answer:

Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃

The coefficients are: 1, 1, 1, 2

Explanation:

Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃

The above equation can be balance as follow:

Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃

There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by writing 2 before NaNO₃ as shown below:

Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃

Now the equation is balanced.

The coefficients are: 1, 1, 1, 2

Answer:

8,3, 7,7

Explanation:

Answer:

B.Thermal insulation minimizes energy loses to the atmosphere.

Explanation:

It is important because it helps to stop hit from transferring from the calorimeter to the environment. This would help to have an accurate measurement of the heat that was used in the chemical process. The greatest cause of error that happens in calorimetry is when heat is lost to the environment. To reduce this, you insulate the calorimeter and add a cover.

Answer:

the answer is option E they are bronsted lowry acid

Answer:

i think is probably A

Explanation:

because at constant temperature, the product of the pressure and volume of a given mass of and ideal gass in a closed system is always constant

Answer:

I believe the answer is A or D

Explanation:

I hope this helps you out!

Answer:

True

Explanation:

The answer is True...

Answer:

i think true

Explanation:

if right than tag me brilliant

Answer:

27.9 g

Explanation:

CsF + XeF₆ → CsXeF₇

First we convert 73.1 g of cesium xenon heptafluoride (CsXeF₇) into moles, using its molar mass:

As 1 mol of cesium fluoride (CsF) produces 1 mol of CsXeF₇, in order to produce 0.184 moles of CsXeF₇ we would need 0.184 moles of CsF.

Now we convert 0.184 moles of CsF to moles, using the molar mass of CsF:

Answer:

There is 9.6 grams of CO2 produced

Explanation:

Step 1: Data given

Mass of methane = 5.50 grams

Molar mass of methane = 16.04 g/mol

Mass of oxygen = 13.9 grams

Molar mass of oxygen = 32.0 g/mol

Step 2: The reaction

CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)

Step 3: Calculate number of moles

Moles = mass / molar mass

Moles methane = 5.50 grams / 16.04 g/mol

Moles methane = 0.343 moles

Moles oxygen = 13.9 grams / 32.0 g/mol

Moles oxygen = 0.434 moles

For 1 mol CH4 we need 2 moles O2 to produce 1 mol CO2 and 2 moles H2O

O2 is the limiting reactant. It will completely react (0.434 moles).

There will react 0.434/2 = 0.217 moles CH4

There will remain 0.343-0.217 = 0.126 moles CH4

There will be produced 0.434 moles of H2O and

0.434/2 =0.217 moles of CO2

Step 4: Calculate mass of products

Mass = moles * molar mass

Mass CO2 = 0.217 moles ¨44.01 g/mol

Mass CO2 = 9.6 grams

Mass H2O = 0.434 moles * 18.02

Mass H2O = 7.8 grams

Answer:

NICL2 are classified as an ionic substance

9.D

10.A

11.C

12.B

13.D

14.C

15.A

16.A

18.C

Answer:

937.5g

Explanation:

No of moles = mass ÷ molar mass

According to this question, there are 15moles of the compound; AlCl

Molar mass of AlCl = 27 + 35.5

= 62.5g/mol

Using n = m/M.M

15 = m/62.5

m = 15 × 62.5

m = 937.5g