ethanol has δhvap = 38.6 kj/mol and δsvap = 110. j/mol k, calculate the boiling point of ethanol in °c.

The Jack and Jill exercise is a swimming exercise that involves two swimmers swimming in a pool.

Jack:

Velocity = 25.0 m/142.5 s = 0.175 m/s

Speed = 9 lengths x 25.0 m/142.5 s = 2.125 m/s

Jill:

Velocity = 25.0 m/142.5 s = 0.175 m/s

Speed = 10 lengths x 25.0 m/142.5 s = 2.375 m/s

To learn more about The average velocity refer to:

https://brainly.com/question/24739297

#SPJ4

To find the deflection of a pointer in a centrifugal force experiment, you need to perform the following steps:

Calculate the force: The magnitude of the centrifugal force can be calculated using the equation F = m * r * w^2, where m is the mass of the pointer, r is the distance from the axis of rotation, and w is the angular velocity. The deflection of the pointer is proportional to the centrifugal force, so you can use the measurement of the deflection to estimate the force.

To know more about centrifugal force please refer:

https://brainly.com/question/17167298

#SPJ4

The electric potential at a given point is zero if the electric field there is also zero.

No, just because there is no electric field at a certain location does not entail that there is also no electric potential there. The situation of two similar charges that are spread apart is an excellent example. Electric Potential (V): The amount of work required to move a unit positive charge in an electric field from infinity to a specific point is known as electric potential. (E) Electric Field The term "electric field" refers to the electric force per unit positive charge at a place. We use the electric field for each point charge to determine where the electric field is zero.

Learn more about electric here-

https://brainly.com/question/15800304

#SPJ4

The statement about a uniform wheel that is free to rotate about its center of mass (cm) by four forces of equal magnitude but different directions acting on and tangent to the edge is the net force on the wheel is not zero but the net torque about the CM is zero (option E)

Newton's law is used to calculate the net force acting tangent to the rim of the wheel.

∑F = ma

To spin the wheel about its center mass, the net force on the wheel must be greater than zero.

Angular momentum conservation

The torque acting on the wheel about its center mass is constant due to the principle of conservation of angular momentum.

As a result, the net torque about the CM is zero.

The question is incomplete, it should be:

Four forces of the same magnitude but different directions act at and tangent to the rim of a uniform wheel free to spin about its center of mass (CM). Which statement about the wheel is correct?

A. None of these

B. Neither the net force on the wheel nor the net torque on the wheel about the CM

is zero.

C. The net force on the wheel is not zero but the net torque about the CM is zero.

D. The net force on the wheel and the net torque on the wheel about the CM are zero.

E. The net force on the wheel is zero but the net torque about the CM is not zero.

Learn more about force here: https://brainly.com/question/30390210

#SPJ4

Evaporation and sublimation are the mechanisms through which moisture is introduced to unsaturated air.

Unsaturated air has a relative humidity substantially lower than 100%, while saturated air is thought to have a relative humidity of 100%. The opposite of saturated air is unsaturated air, which contains less water vapour but has a greater capacity to hold it. By changing the temperature, you may switch between the two types of air. Just bring the unsaturated air's temperature down till it becomes saturated. Any air with a moisture content greater than zero is capable of doing that. Liquid water is converted into vapor by evaporation and transpiration, and this vapor rises into the atmosphere as a result of rising air currents.

To learn more about temperature click here https://brainly.com/question/24283056

#SPJ4

The other end of the wire will be located 5 feet away from the base of the tower, as the total length of the wire is 20 feet and the antenna is connected to the wire 15 feet above the ground.

This is analogous to placing the antenna 15 inches along a 20-inch ruler, leaving 5 inches remaining - the same distance from the base of the tower to the other end of the wire.

It is essential that the wire is securely attached to the antenna and tower in order to safely support the antenna. If the wire is not properly secured or is not the correct length for the antenna's height and distance from the tower, the antenna may not be able to hold itself up and could fall.

To prevent this, it is important to make sure the wire is firmly connected to both the antenna and tower and the length is suitable for the antenna's height and distance from the tower.

To learn more about antenna visit:

https://brainly.com/question/17373704

#SPJ4

The force developed by the boy on the left hand side is 14 N to make a net force of 10 N in th right hand side.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to define force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

The total of all forces exerted on an item is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the phrase "net force" is employed.

A soccer ball takes off and travels into the air when we kick it. The ball is then being affected by a net force. A net force is also exerted on the ball when it begins to fall back to the earth and ultimately stops.

There is a net force of 10 Newton acting in the right side then the force acting by the by in the left be F N(say)

So, the net force  is

11 + 21 - 8 - F = 10

F = 14 N

The force developed by the boy on the left hand side is 14 N to make a net force of 10 N in th right hand side.

To learn more about Force refer to :

https://brainly.com/question/29261584

#SPJ1

The spring constant, also known as the stiffness constant, is a measure of the resistance of a spring to being deformed when a force is applied to it. It is denoted by the symbol "k" and has units of N/m in the SI system.

The spring constant represents the amount of force required to cause a unit change in the length of a spring. Understanding the spring constant is important for designing and selecting springs for various applications, and for understanding the behavior of springs under different loads and extensions.

The spring constant represents the relationship between the force applied to the spring and the resulting change in its length, or extension. The equation for this relationship is given by Hooke's Law, which states that the force (F) applied to a spring is proportional to its extension (x) and is given by the equation F = kx.

The spring constant determines the stiffness of the spring and the ease with which it can be deformed. Springs with a higher spring constant are stiffer and require more force to be deformed, while springs with a lower spring constant are more flexible and require less force to be deformed. The spring constant is an important design parameter for springs and is used to select the appropriate spring for a given application.

Learn more spring constant here:

https://brainly.com/question/14670501

#SPJ4

Answer: Waxing crescent moon

Explanation: The moon phase that comes after the new moon is waxing crescent and before the first quarter.

When 800 nm light is shined onto the same metal surface, the electrons will be ejected with a kinetic energy of 2.5 x 10-28 J.

This is because the energy of a photon is inversely proportional to its wavelength, so the energy of a photon with double the wavelength will be half the energy of the original photon.

The amount of kinetic energy the electrons will have is determined by the energy of the photons, which is inversely proportional to the wavelength of the light. This means that the electrons ejected by the 800 nm light will have half the kinetic energy of the electrons ejected by the 400 nm light, since the 800 nm light has twice the wavelength of the 400 nm light.

Learn more about kinetic energy:

https://brainly.com/question/8101588

#SPJ4

The net charge to be placed on a piece of sulphur is calculated to be -966.4 C.

For us to find out how much charge is being put, we need first to find out how many atoms of sulphur there are. This can be achieved knowing that sulphur has 32.1 u of mass, and each u is 1.66 × 10⁻²⁷. So, there will be,

Atoms = (326 × 10⁻³)/(32.1 × 1.66× 10⁻²⁷) = (326 × 10²⁴)/(53.29) = 6.12 × 10²⁴

We have a total of 6.12 × 10²⁴ atoms. We know that an electron will be added on 1/1012 of these atoms. That is,

⇒ 6.12 × 10²⁴ × 1/1012 = 0.00604 × 10²⁴ = 6.04 × 10²¹ electrons

Multiplying this by the charge of each electron,

Net charge Q = 6.04 × 10²¹ ×(-1.6 × 10⁻¹⁹) = -9.664 × 10² C = -966.4 C

To know more about charge:

https://brainly.com/question/29125645

#SPJ4

Answer: 2

Explanation:

(a) The spacing Y of the maxima of the screen for light is  5 x 10^-7 m. (b) Yes, we would expect to observe the interference of light. (c) The slits should be placed a distance of 500 nm apart to observe the maxima separated by 1 mm.

(a) The spacing Y of the maxima on the screen can be calculated using the formula for the interference of light from two slits:

=> Y

= L x λ / d

here L is distance from the slits to the screen,

λ is wavelength of the light,

d is distance between the slits.

Putting the values, we have:

=> Y

= 1 m x 500 nm / 1 cm

= 500 nm/cm

= 5 x 10^-7 m

(b) Yes, we would expect to observe the interference of light on the screen for this situation. This is because when light passes through two narrow slits, it creates an interference pattern on the screen that is a result of the constructive and destructive interference of the light waves. This pattern is characterized by bright and dark bands, with the bright bands representing areas of constructive interference and the dark bands representing areas of destructive interference.

(c) To calculate the distance the slits should be placed to observe the maxima separated by 1 mm, we need to rearrange the formula for Y and solve for d:

=> d

= L x λ / Y

= 1 m x 500 nm / 1 mm

= 500 x 10^-9 m

So, the slits should be placed a distance of 500 nm apart to observe the maxima separated by 1 mm.

To know more about slits please refer: https://brainly.com/question/29842068

#SPJ4

The three different types of matter are solid, liquid, and gas. By examining the configuration of their particles, we can understand why they have various properties.

The complete question is,

How many states of matter are there?

To learn more about matter refer to:

https://brainly.com/question/3998772

#SPJ1

The amount of heat energy required to change 0.650 kg of solid gold at 880°C to a liquid at 1064°C is approximately 419.36 kJ.

The steps for this process are as follows:

Step 1: Calculate the specific heat capacity of gold.

The specific heat capacity of gold is 0.129 J/g°C.

Step 2: Calculate the amount of energy needed to raise the temperature of 0.650 kg of gold from 880°C to 1064°C.

This can be done by multiplying the mass of the gold (0.650 kg) by the specific heat capacity (0.129 J/g°C) and the change in temperature (184°C).

The result is approximately 24.1 kJ.

Step 3: Calculate the amount of energy needed to change the state of the gold from solid to liquid.

This can be done by multiplying the mass of the gold (0.650 kg) by the latent heat of fusion for gold (395.3 J/g).

The result is approximately 257.3 kJ.

Step 4: Add the two calculated values together to get the amount of heat energy required to change 0.650 kg solid block of gold at 880°C to a liquid at 1064°C. 24.1 kJ + 257.3 kJ = 281.4 kJ.

Therefore, the amount of heat energy required to change 0.650 kg solid block of gold at 880°C to a liquid at 1064°C is approximately 419.36 kJ.

To know more about specific heat capacity visit:

https://brainly.com/question/29766819

#SPJ1

a) The ratio of the sailing speed v s to the non-sailing speed v ns is calculated to be 3.712.

b) In terms of 1/v s, the difference in the times the insects take to travel the first 2.0 m along the path with and without sailing is 5.41/v s.

a) We know that, v ∝ 1/t

where, v is velocity

t is time

v s is the sailing speed

v ns is non sailing speed

So, v s /v ns = 24.5/6.6 = 3.712

v ns = 1/3.712 v s = 0.27 v s ---(1)

Given, d = 2 m

We know, t = d/v

t s = 2/v s

t ns = 2/ v ns ----(2)

where, t s time taken for sailing

t ns is the non sailing time

Putting v ns = 0.27 v s in (2),

t ns = 2/(0.27 v s) ---(3)

The difference between t ns and t s is,

t d = t ns - t s

t d = 2/(0.27 v s) - 2/v s

t d = 2/v s (1/0.27 - 1)

t d = 2/v s (3.703 - 1)

t d = (2× 2.703)/v s

t d =  5.41/v s

To know more about speed:

https://brainly.com/question/21806184

#SPJ4

If the behavior of electric power is represented by the equation f(x) = x² + 2x + 7 = 0, then the value of x will be (-1 + i√6) & (-1 - i√6).

The behavior of electric power, x, in a circuit is represented by the quadratic equation:

f(x) = x² + 2x + 7

if f(x) = 0

x² + 2x + 7

Here the value of a = 1, b = 2, c = 7

To find the value of x, we use the formula, x = (-b ± √(b² - 4ac))/2a

x = (-2 ± √(2²- 4 × 1 × 7))/(2 × 1)

x = (-2 ± √(4 - 28))/2

x = (-2 ± √-24)/2

x = (-2 ± √(-6×4)/2

x = (-2 ± 2√-6)/2

x = (-1 ± √-6)

x = (-1 + √-6) & (-1 - √-6)

To know more about quadratic equation, here

https://brainly.com/question/30098550

#SPJ4

--The given question is incomplete, the complete question is:

"in physics class, tara discovers that the behavior of electrical power, x, in a particular circuit can be represented by the function f(x) = x² + 2x + 7. If f(x) = 0, solve the equation and express your answer in the simplest (a + ib) form."--

The question can be best tested by the activity is: What is the coefficient of kinetic friction of the surface?

The frictional force resists the motion of the objects.

The force and mass are directly proportional to each other.

The definition of force in physics is: The push or pull on a massed object changes its velocity.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

If the mass increases, resisting frictional force also increases.

As the force is resistive in nature, if force increases, object's motion decreases.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

The feeling of being thrown to either side while negotiating a curve is due to the centrifugal force, and the direction of this force is outwards the center of the curve.

When we negotiate a circular curve we experience a force due to the circular motion. This force is called centrifugal force. The direction of working of this force is away from the center of curve. Centrifugal force experienced by an object is equal to:

F = mv²/R

Where m is the mass of the object, v is the velocity of the object on the curve path, and R is the radius of the circular curve.

To know more about centrifugal force, here

https://brainly.com/question/17167298

#SPJ4

The claim is observed to be wrong from the calculations done regarding the efficiency of the engine.  

Heat Q₁ is given as 110 × 10⁶ J

Heat Q₂ is given as 50 × 10⁶ J

Temperature T₁ is given as 415 K.

Temperature T₂ is given as 212 K.

Work done is said to be 16.7 kW hours.

So, W = 16.7 × 10³ W (3600 sec) = 16.7 × 3600× 10³ W

η₁ = W/Q₁ = (16.7 × 3600× 10³)/(110 × 10⁶) = 0.5465 = 54.65%

Efficiency of the Carnot engine = 1 - T₂/T₁ = 1 - 212/415 = 0.5 = 50%

So, the claim is observed to be wrong.

To know more about engines:

https://brainly.com/question/13146186

#SPJ4

Answer:

a car is moving at a speed of 25mph (11 m/s), suddenly the driver saw something and tried the best to brake. the magnitude of the acceleration is 6.6 m/s2 and constant. how far will it travel before being stopped in the unit of meters?

Answer: do you need a essay for it? also i need a close up!!

Explanation:

The time required for the car to accelerate from rest to 70.9 mil/h is: 0.46 s

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

The formula for uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:

vf = vi + (a * t)

Where:

Given info:

By converting the final velocity units from (mil/h) to (m/s) we have:

vf= 70.9 mil/h * 1609.34 m/1  * 1 h/3600 s

vf= 31.69 m/s

Applying the final velocity formula, clearing the time, and assuming the cyclist starts from rest we get:

vf = vi + (a * t)

t = (vf – vi) /a

t = (31.69 m/s – 0 m/s) /7 *9.8 m/s²

t = 31.69 m/s/ 68.6 m/s²

t = 0.46 s

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

Centripetal force is the pressure exerted on an item moving curvilinearly that is pointed in the direction of the axis of rotation or the centre of curvature.

Whenever an object moves or rotates, the centripetal force is applied perpendicular to the direction in which the object moves. The centripetal force of an item moving in a circular path always operates in the direction of the circle's center, according to Newton's second law of motion.

The Centripetal Force Formula is defined as the product of mass (in kg) and tangential velocity (in m/s) squared, divided by radius (in m). This formula states that the centripetal force will 2 times with a doubling of tangential velocity.

To learn more about Centripetal force :

https://brainly.com/question/14802071

#SPJ4

The activation energy of the reaction when the slope is given is calculated to be 19998.5 J/mol.

The minimum additional energy needed by a reactive molecule to convert into a product is known as activation energy. It is also known as the minimal energy required to energise or activate molecules in order for them to engage in a chemical reaction or transformation.

The relation between activation energy and slope is given by the expression,

- Ea/R = slope

where, Ea is activation energy

R is universal gas constant

Slope is given as -2405.4 k.

Making Ea as subject, we have,

Ea = -R × slope = -8.314 × (-2405.4) = 19998.5 J/mol

Thus, the activation energy of the reaction is calculated to be 19998.5 J/mol.

To know more about activation energy:

https://brainly.com/question/14907998

#SPJ4

The excess number of hydrogen protons aligned with the static magnetic field direction (b0) is called longitudinal magnetization.

When a tissue is magnetized in a direction that is parallel to the direction in which the field is oriented, this type of magnetization is known as longitudinal magnetization. The term "transverse magnetization" refers to a situation in which the direction of magnetization in the tissue is perpendicular to the direction in which the magnetic field is directed and lies in the transverse plane. When placed in a magnetic field, tissue will become magnetized along its longitudinal axis and become longitudinally magnetized.

It won't change its state unless either the magnetic field is altered or an RF pulse is used to reroute the magnetization in the material. Until then, it will continue to be in the current state. In the event that the magnetization is momentarily redirected in a different direction by an RF pulse, it will eventually revert back to its original longitudinal position after a certain amount of time has passed.

To learn more about longitudinal magnetization, click here:

https://brainly.com/question/13088380

#SPJ4

When we arrange the objects in increasing strength of gravitational attraction, the following results:

To arrange the objects in increasing strength of gravitational attraction, we shall determine the gravitational force between each pair oif the objects. Details below:

For electron-dog:

F = GM₁M₂ / r²

F = (6.67×10¯¹¹ × 9.11×10⁻³¹ × 20) / 1²

F = 1.22×10⁻³⁹ N

For butterfly-rock:

F = GM₁M₂ / r²

F = (6.67×10¯¹¹ × 5.0×10⁻⁴ × 8) / 1²

F = 2.67×10⁻¹³ N

For electron-butterfly:

F = GM₁M₂ / r²

F = (6.67×10¯¹¹ × 9.11×10⁻³¹ × 5.0×10⁻⁴) / 1²

F = 3.04×10⁻⁴⁴ N

For rock-dog:

F = GM₁M₂ / r²

F = (6.67×10¯¹¹ × 8 × 20) / 1²

F = 1.07×10⁻⁸ N

From the above calculations, we have the gravitational attraction as:

Thus, arranging in increasing order, we have:

Learn more about gravitational force:

https://brainly.com/question/24299568

#SPJ1

For the given charge the magnitude of electric field at 1 m is  4 times the electric field at 2 m.

Electric charge can create magnetic field as well electric fields.

According to the given question a charge is given and we need to find electric field at 2 different positions that is at 1 m and 2 m.

Electric field at 1 m is E1   E1 = Kq/r₁²

E1 = Kq / 1²

E1 = Kq -------- 1

Electric field at 2 m is E2 , E2 = Kq/ r₂²

E2 = Kq / 2²

E2 = Kq / 4 ---------- 2

After comparing E1 and E2 from the above equation 1 and 2

E1 = 4 E2

Thus electric field at 1 m is  4 times the electric field at 2 m.

To learn more about electric field click here:

https://brainly.com/question/8971780

#SPJ4

The above question is incomplete. Check complete question below:

The magnitude of the electric field 1 m away from the positive charge is _________ the magnitude of the electric field 2 m away .

1. equal to

2. one-quarter

3. four times

4. two times

5. one-half

When using an extension ladder, it is important to know which part is responsible for locking the fly section into position. The part responsible for this is called the rung lock so option 3 is correct.

Rung locks are the components located at the top of the ladder that secure the fly section in place. When the rung locks are engaged, the fly section is locked into the desired position. Extension ladders are typically at an angle of 75 degrees when in use, and the rung locks help to keep the ladder in place at this angle. Additionally, spur plates are attached to the base of the ladder and help to increase stability and grip on the surface below. The size of the extension ladder can vary, but most are around 6 feet in length.

To learn more about Extension ladders, visit:

https://brainly.com/question/26316844#

#SPJ11

These clouds typically form between 1,000 and 5,000 feet in the air, while temperature increases frequently follow cloud formation and result in an increase in cloud base height.

These clouds may cause small showers and are relatively created by air rising as a result of surface heating. There are three broad categories for cloud heights: low, moderate, and high. The distance from the ground to the base of a cloud determines its classification. Low clouds typically have bases below 6,500 feet above the ground; intermediate clouds have bases between 6,500 and 20,000 feet; and high clouds have bases at 20,000 feet and above. Depending on the location and temperature, we may state that the distance between the ground and the cloud is approximately 2 to 18 kilometers.

Learn more about relatively here-

https://brainly.com/question/17010339

#SPJ4