Example of light cue for sunset

The amount of 6 gauge wires that can occupy a 1-inch schedule 80 PVC pipe is based upon various components, such as the insulation thickness of the wire and the fill capacity of the conduit.

Based on the National Electric Code (NEC), the maximum fill capacity for the conduit's conductors are founded upon the cross-sectional area of the conduit and the cross-sectional area of the conductors. As per a 1-inch schedule 80 PVC pipe, the uppermost permissible quantity of conductors is 138 circular mils each square inch.

Given that the 6 gauge wire possesses a standard insulation size, the wire's outside diameter runs approximately 0.4375 inches which in terms, corresponds to a 0.15 square inch cross-sectional area.

The number of conductors which can fit in a 1-inch Schedule 80 PVC pipe is roughly one 6 gauge wire based on this formula: maximum wires = (0.7854 x 1^2 x 0.40) / 0.15 equals 1.05.

Read more about engineering here:

https://brainly.com/question/28321052

#SPJ1

The steps below must be followed in order to examine a graph:

Your interpretation of the data will depend on the kind of graph you are seeing. Line graphs, bar graphs, scatter plots, and pie charts are examples of common graph types.

Analyze the data points on the graph to find out what they stand for. If there are several data sets, identify each one and ascertain their connections.

Look over the data to identify any patterns or trends. Are the data points, for instance, growing or shrinking with time? An overview was given based on the information.

Learn more about graph on

https://brainly.com/question/19040584

#SPJ1

When it comes to biotechnology or cloning, there is the possibility of hazardous applications.

For example, the development of designer babies may result in discrimination against persons who have not been genetically modified.

Furthermore, the production of human clones for organ harvesting may result in the exploitation of vulnerable people. To reduce these hazards, ethical norms must be implemented.

One guideline may be to guarantee that any biotechnology or cloning study or application is carried out with the well-being of all those involved in mind. Transparency, informed consent, and strong regulation might be used to avoid unethical or dangerous applications of technology.

Learn more about cloning at:

https://brainly.com/question/12483409

#SPJ1

To switch to a command- line terminal( tty5),  one need to press Ctrl Alt F5 and log in to the outstation via the use of the root username as well as LINUXrocks! word.

One can code by the use a. sh extension for shell scripts due to the fact that it identifies the train as a shell script, making it easier for druggies to identify the purpose of the train.

The shell script in the above code will creates a report of the fragment configuration of the system. It starts by setting the filename to the hostname of the system, adds a heading for the LVM configuration, and also lists the Logical Volume director( LVM) using the lvscan command.

Therefore, After running the chmod command to make thediskconfig.sh script executable, running./diskconfig.sh at the command code generates the fragment configuration report and saves it to a series with the name of the system's hostname, followed by the". report" extension.

Learn more about command    from

https://brainly.com/question/25808182

#SPJ1



See text below

1. Switch to a command-line terminal (tty5) by pressing Ctrl+Alt+F5 and log in to the terminal using the user name of root and the password of LINUXrocks!.

2. At the command prompt, type vi diskconfig.sh and press Enter to open a new file for editing called diskconfig.sh in your home directory. Why is it good form to use a .sh extension for shell scripts?

3. Enter the following text into the diskconfig.sh file. As you are typing the contents, ensure that you understand the purpose of each line (reviewing the chapter contents and appropriate man pages as necessary). When finished, save and quit the vi editor.

Copyright 2020 Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. WCN 02-200-202

O Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. Due to electronic rights, some third party content may be suppressed from the eBook and/or eChapter(s). deemed that any suppressed content does not materially affect the overall learning experience. Cengage Learning reserves the right to remove additional content at any time if subsequent rights restrictions require it.

CHAPTER 7 Working with the BASH Shell

#!/bin/bash

#This script creates a report of our disk configuration

FILENAME= 'hostname'

echo "Disk report saved to $FILENAME.report"

echo -e "\n LVM Configuration: \n\n" >>$FILENAME.report

lvscan >> $FILENAME.report

echo -e "\n\n Partition Configuration: \n\n" >>$FILENAME.report fdisk 1 head -17 >>$FILENAME.report

echo -e "\n\n Mounted Filesystems: \n\n" >>$FILENAME.report

df -hT | grep -v tmp >>$FILENAME.report

At the command prompt, type chmod u+x diskconfig.sh and press Enter. Next, type ./diskconfig.sh at the command prompt and press Enter. Note the filename that your report was saved to.



that your report was saved to.

5. At the command prompt, type less filename where filename is the filename you

noted in the previous step, and press Enter. View the contents. Would this shell script work well to record storage configuration from different systems? Why?

6. At the command prompt, type vi dirbackup.sh and press Enter to open a new file for editing called dirbackup.sh in your home directory.

7. Enter the following text into the dirbackup.sh file. As you are typing the contents, ensure that you understand the purpose of each line (reviewing the chapter contents and appropriate man pages as necessary; the tar backup command will be discussed in Chapter 11 and does not require detailed interpretation here). When finished, save and quit the vi editor.

#!/bin/bash

#This script backs up a directory of your choice

if [ $# -ne 1 ]

then

echo "Usage is $0 <directory to back up>"

exit 255

fi

echo "Performing backup....



echo "Backup completed successfully to ~/backupfile.tar.gz"

Copyright 2020 Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. WCN 02-200-202

2020 Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. Due to electronic rights, some third party content may be suppressed from the eBook and/or eChapter(s). has deemed that any suppressed content does not materially affect the overall learning experience. Cengage Learning reserves the right to remove additional content at any time if subsequent rights restrictions require it.

CHAPTER 7

The typical prison cell is generally about 6 feet long, 8 feet wide and with a height of 7 feet. It is created to hold one or two inmates and furnishes them both an bed, toilet, sink and a small table/desk.

Generally, these beds comprise of bunked frames loaded with a mattress as well as a pillow in each cubicle. The lavatory and sink are ordinarily made of stainless steel integrated into the wall to save space.

A single solid door combined with a pinch window, peephole and/or similar machinery enables guards to watch those within imprisonment facilities. As for the inner walls surrounded by prisoners, they are mostly painted dull shades like beige or gray, sometimes permitting air conditioning systems for temperature moderation and air quality.

Dependent on the amount of security required, some cells may even host bonus amenities. For instance, correspondingly high-security spaces may involve fortified floors/walls, complete absence of any charmed lights from outside and a meagre food pass-through at the entrance. In contrast, low-security units may serve larger windows and positional nearness in close sites such as communal rooms, recreational areas and others.

Learn more about prison on

https://brainly.com/question/10190308

#SPJ1

If there are 3 bulbs in a series circuit and one bulb goes out or breaks, the other bulbs will all go foff (Option B)

In a serios circuit, there is only one flow of elecricity. Only one path via which electricityh can flow. Hence, when that path is cut off by the removal of one bulb, all the other bulbs will go off.

A series circuit is made up of two or more components linked in a loop.

A series circuit has the following advantages: A single switch can control all of the components. There are fewer cables necessary.

One of the drawbacks of a series circuit is that the components cannot be regulated independently.

Learn more about Series Circuit:
https://brainly.com/question/11409042
#SPJ1

Answer:

C) Clutch

Explanation:

Note that the motion of a  follower resting against the cam surface of each of the six types of cam profiles are given as follows.

The motion of a follower resting against the cam surface of each of the six types of cam profiles would be as follows:

Circular: The follower will have a uniform motion in a circular path as the cam rotates.

Heart   The follower will have a slow, linear motion as it follows the concave portion of the heart-shaped cam profile, and a fast, linear motion as it follows the convex portion.

Snail    The follower will have a slow, linear motion as it follows the spiral-shaped cam profile.

Hexagonal The follower will have a combination of linear and oscillatory motion as it follows the six-sided cam profile.

Eccentri The follower will have a reciprocating linear motion as the eccentric cam rotates.

Pear The follower will have a combination of linear and oscillatory motion as it follows the pear-shaped cam profile.

Learn more about Cam Profile;
https://brainly.com/question/13884034
#SPJ1

Answer:

the correct answer is D) Differential.

Explanation:

Answer:

d is the answer

Explanation:

the differential is a system that transmits an engine's torque to the wheels. The differential takes the power from the engine and splits it, allowing the wheels to spin at different speeds.

just think of a gear facing nothing /\ : ( ‘ | ‘ being the gear )

l

Think of a gear on the right like this:

_

If those 2 touch each other they move ( shown in picture )

Which makes d the answer

D being the answer

Answer: People typically use colors to help interpret a product's freshness.

Explanation:

:)

Answer:

Option C is the correct answer.

Explanation:

Answer:

Not be quick to react, listen to what they are saying and look from their perspective so you can see what you may need to improve on or fix.

Explanation:

Some people have a tendency to react negatively to constructive criticism. They might try to defend themselves, or escalate the tone of the conversation. It's better to stay calm and really listen to what the person has to say. The key is to be receptive to advice from others.

A production process is composed of many components that are each vital in the effective fabrication of a product. These include:

Raw materials: The origin substances which must be used to produce an item come from vendors as either natural elements like lumber, metals, or chemicals; or part-finished objects.

Machinery and equipment: Necessities for producing a product by transforming raw material into completed goods, varying the tools utilized such as cutting machines, assembly lines, or 3D printers subject to the purpose of making the product.

Labor: Essential to operate the machinery, implement quality control, and supervise the whole manufacturing procedure, utilizing both trained and untrained staff members.

Production management: Constructing plans, establishing organizational systems, supervising the fabrication activity to achieve efficiency and timely results, implicating issues including stock keeping, planning meets schedules, and allocating resources.

Quality control:A significant fact of the production action that ascertains the last form of the article accomplishes its projected excellence model. This system involves inspecting, evaluating, and examining items at various phases of the construction to recognize and amend any shortcomings.

Read more about production here:

https://brainly.com/question/14293417
#SPJ1

What are the key components, their functions, and the working principles involved in a typical production process?

It is not professional to offer constructive criticism if you do not have constructive intent,

Providing constructive criticism is not considered professional unless it is offered with a genuine intention to be helpful, and you possess the proper comprehension of the situation or context at hand, along with the required expertise to provide valuable feedback.

Furthermore, if given in an impolite and discourteous manner, offering criticism can also be deemed as unprofessional.

Yet, when approached positively, having a clear perception of the context, skills to offer productive commentary, and presented respectfully and constructively, providing criticism is seen as a professional way for others to evolve and flourish.

Read more about constructive criticism here:

https://brainly.com/question/3594512

#SPJ1

The vertical component of the thrust is: F_y = 1.1646 N

The formula for the vertical component of a force is:

F_y = F * sin θ

The formula for the horizontal component of a force is:

F_x = F * cos θ

Now, we are told that the thrust of the object is a force of 4.5 N while the angle of tilt of the thrust is 15 degrees. Thus:

The vertical component of the thrust is:

F_y = 4.5 * sin 15

F_y = 4.5 * 0.2588

F_y = 1.1646 N

Read more about Vertical component of force at: https://brainly.com/question/30560741

#SPJ1

One advantage which binder jetting has compared to other additive manufacturing (AM) processes is C. Larger build volumes

Binder jetting, an additive manufacturing (AM) process, utilizes a binding liquid to connect layers of pulverized material together.

This method of production offers several components that differentiate it from other AM processes; one is its capacity for extensive build volumes, making it viable for larger parts or numerous items to be produced in only one build.

Furthermore, it has the advantage of accelerative output rates resembling or even faster than those created by similar fabrication techniques.

Read more about binder jetting here:

https://brainly.com/question/31591170

#SPJ1

Answer:

It is the engine

Explanation:

Its an alternator which is a type of electric engine used in modern vehicles