explain a natural process, while
describe a natural process.

Answers

Answer 1

Answer:

a natural process is water cycle.

Explanation:

during this process,water evaporates from different water bodies ,when the warm water rises,the cold and heavier water comes down to take its place.On the other hand,the warm water on rising,changes to water vapour.

This water vapour helps in the formation of clouds .

When the cloud becomes heavy and is not able to hold the water vapour, it falls down as rain or snow depending upon the climate and atmospheric temperature.

This process continues over and over again


Related Questions

List and describe the steps of energy transfers that occur that allow a digital recording to be played through a speaker and ultimately become sound waves.

Answers

Answer:

1) Sound waves are stores as electrical signal in the digital recording.

2) the electrical signal of the digital recording is transcribed and sent to the voice coils.

3) the voice coil changes this electrical signal into varying magnetic fields.

4) The magnetic field pushes and pulls the diaphragm of the speakers.

5) the pushing and pulling of the diaphragm generates sound waves in the speaker.

What is the meaning of the red moon??

Answers

it’s like a blood moon. it turns into a red glow. it occurs during a total lunar eclipse

Answer:

the red moon occurs during lunar eclipse

Explanation:

The reddish coloration arises because sunlight reaching the Moon must pass through a long and dense layer of Earth's atmosphere, where it is scattered

Katie throws a 3 kilogram ball fast at a speed of 15 meters what is the momentum of the ball katie threw

Answers

Answer:

Hey!

Your answer is 45kg.m/s

Explanation:

Using the formula P=M x V

(p=momentum...M=mass...V=velocity)

We do M x V

15 x 3

Which gives us an answer of 45kg.m/s!

HOPE THIS HELPS!!

Referencing the reasoning you used from #1, explain the difference between objects that feel hot and those that
feel "cold".

Answers

Answer:

The temperature of the cold water is lower than the warm one. So, when we put the hand in the warm from the cold water, our hand will absorb heat, causing the hand to feel hot. Thus, we can conclude that the more heat it absorbs, the more hotter it is. Whereas the more heat it releases, the colder it is.

Which of the following gases will diffuse the fastest at room temperature?

H2

Ne

He

O2

Answers

Answer:

I am pretty sure that it is A. H2.

Explanation:

Sorry if it's wrong.

HELP WORTH 20 points if Awnser is correct

Answers

.3999 moles

The ideal gas law: PV = nRT

155 degrees Celsius = 428 Kelvins  

n = PV/RT

n = 2.80 atm x 5.00 L/0.0821 (gas constant) x 428 K

= 0.398 moles

the radioactive atom 61/27 co emits a beta particle. write an equation showing the decay

Answers

Answer:

[tex]\rm _{27}^{60}\text{Co} \longrightarrow \, _{-1}^{0}\text{e} + \, _{28}^{60}\text{Ni}[/tex]

Explanation:

The unbalanced nuclear equation is

[tex]\rm _{27}^{60}\text{Co} \longrightarrow \, _{-1}^{0}\text{e} + \, ?[/tex]

Let's write the question mark as a nuclear symbol.

[tex]\rm _{27}^{60}\text{Co} \longrightarrow \, _{-1}^{0}\text{e} + \, _{Z}^{A}\text{X}[/tex]

The main point to remember in balancing nuclear equations is that the sums of the superscripts and the subscripts must be the same on each side of the equation.  

Then

60 = 0 + A, so A = 60 - 0 = 60, and

27 = -1 + Z, so Z  = 27 + 1 = 28

Your nuclear equation becomes

[tex]\rm _{27}^{60}\text{Co} \longrightarrow \, _{-1}^{0}\text{e} + \, _{28}^{60}\text{X}[/tex]

Element 28 is nickel, so the balanced nuclear equation is

[tex]\rm _{27}^{60}\text{Co} \longrightarrow \, _{-1}^{0}\text{e} + \, _{28}^{60}\text{Ni}[/tex]

Why did the United States government set aside land for the first national parks?


A.

They wanted to settle the west as quickly as possible.


B.

They worried people would destroy the animals and land.


C.

They worried Native Americans wouldn’t have anywhere to go.


D.

They wanted to make sure all citizens would get a piece of land.

Answers

B) They worries people would destroy the animals and land.

Answer:

b

Explanation:

hope it helps

Use the drop-down menus to identify each substance as an organic or inorganic compound
ozone (O3):
methane (CH4):
aluminum hydroxide (Al(OH)3):
butane (C4H10):
carbon monoxide (CO):

Answers

Answer:

ozone (O3): inorganic

methane (CH4): organic

aluminum hydroxide (Al(OH)3): inorganic

butane (C4H10): organic

carbon monoxide (CO): inorganic

Explanation:

An inorganic compound is typically a chemical compound that lacks carbon–hydrogen bonds, that is, a compound that is not an organic compound. Some simple compounds that contain carbon are often considered inorganic. Examples of inorganic compounds include carbon monoxide , carbon dioxide , carbonates, carbides , cyanides, cyanates, and thiocyanates. Most of these compounds are normal parts of mostly organic systems, including living organisms. When a chemical substance is classified as inorganic, it does not necessarily mean that it does not occur within

living things.

Organic compounds typically contain the carbon-hydrogen bonds. The carbon atoms often catenate and most organic substances occur in living systems and are products of biochemical reactions in living organisms. However, organic substances can also be synthetic and can be prepared in the laboratory.

Answer:

inorganic

organic

inorganic

organic

inorganic

Explanation: trust me

What do you think is meant by the term pseudoscience?

Answers

Answer:

The term "pseudo-science" assumes a criterion that allows a differentiation between science and nonscience, good science and bad science, true and false. ... They must try to understand them and not put out in television programmes the sort of pseudo-science that does not exist in reality

Explanation:

Explanation:

it means false science

How many grams of ammonia (NH3) are present in 5.0L of a 0.050M Solution?

A. 5.2g
B. 4.3g
C. 4.3mol
D. 78g

Answers

Answer:

B

Explanation:

NH3 in a liter is 17 x 0.05 = 0.85g

In 5L = 0.85 x 5 = 4.25 = 4.3g

Answer:

B. 4.3 g

Explanation:

m = 5.0L x 0.050 mol/L x 17.031 g/mol = 4.26g ~ 4.3g

....

Please see the step-by-step solution in the picture attached below.

Hope this answer can help you. Have a nice day!

Which of the following would form an electrolyte solution?
O A. Oil in water
B. Sand in water
C. Sugar in water
D. Salt in water

Answers

Answer:

D: Salt in water

Explanation:

help help help.
the answer choices are
a. gas
b. mirrors
c. steam
d. photovoltaic cell

Answers

Answer: I'm not totally sure if this is multiple choice or not but it's definitely D.

Explanation:

A sample of a compound contains 60.0 g C and 5.05 g H. It’s molar mass is 78.12 g/mol. What is the compound’s molecular formula?

Answers

Answer:

C6H6

Explanation:

C :     60.0 g*1 mol/12 .01g = 5.00 mol

H:      5.05 g * 1 mol/1.01 g= 5.10 mol

C:H = 5.00 mol : 5.10 mol = 1:1

CH is an empirical formula

Molar mass (12.01 +1.01)=13.02 g/mol

78.12g/mol /13.02 g/mol =6

Molecular formula is the empirical that was taken 6 times (CH)6 = C6H6

Answer:

C. C6H6

Explanation:

For edge

The amplitude of a wave is the vertical distance from the midpoint to either the crest or the
trough of the wave
True
False

Answers

Should be true
Please mark it as brainliest

help asap plzzz! Which of the following diagrams is the correct electron dot diagram for S?

Answers

Answer:

A.

Explanation:

Sulfur has 6 valence electrons, therefore has 6 dots.

- Hope that helps! Please let me know if you need further explanation.

The correct option is A.

What is a dot diagram?

A Lewis electron dot diagram (or electron dot diagram, or a Lewis diagram, or a Lewis structure) is a representation of the valence electrons of an atom that uses dots around the symbol of the element. The number of dots equals the number of valence electrons in the atom.

Why do we use electron dot diagrams?

These diagrams are helpful because they allow us to show how atoms are connected, and when coupled with Valence Shell Electron Repulsion Theory (VSEPR), we can use Lewis structures to predict the shape of the molecule.

Learn more about dot diagrams here brainly.com/question/856013

#SPJ2

The mole concept will most likely be used in

Answers

Answer:

determining how many ozone molecules are lost in the atmosphere

Pls Mark as Brainliest!!! if this helps..

To determine how many ozone molecules

PLEASE HELP :"( DUE NOW!!

What is the equation for the equilibrium constant for this equation?


CO+3H2⇌CH4+H2O



[H2O][H2]/[CH4][CO]



[CO][H2]3/[CH4][H2O]



[CH4][H2O]/[CO][H2]3



[CH]4[H2O]/[H2]3

Answers

Answer:

The correct answer is  

[CH4][H2O]/[CO][H2]3

Option 3 is correct

Explanation:

Step 1: Data given

For the equation aA + bB ⇆ cC + dD

The equilibrium constant is [C]^c * [D]^d / [A]^a*[B]^b

Step 2: Calculate the equilibrium constant Kc

CO+3H2⇌CH4+H2O

Kc = [H2O][CH4] / [CO][H2]³

The correct answer is  

[CH4][H2O]/[CO][H2]3

Option 3 is correct

According to Reference Table Adv-8, which of the following is the strongest Brönsted-Lowry acid?
1.HS-
2.H2S
3.HNO2
4.HNO3​

Answers

Answer:

HNO3

Explanation:

The ability of an acid to act as a Brownstead-Lowry acid depends on it's proton donation ability.

A Brownstead-Lowry acid is a specie that donates hydrogen ions in solution.

Considering all the chemical species listed among the options, HNO3 has the greatest hydrogen donation ability. It then follows that HNO3 is the strongest Brownstead-Lowry acid among the species listed.

If 5.4 g of NaNO3 is dissolved in 350 mL of water, what is the molarity of the solution?

Answers

Answer:

0.18 Moles

Explanation:

first you need to convert the 5.4g to moles using molar mass

[tex](\frac{5.4g}{1})(\frac{1mol}{84.99g} )=\frac{5.4g}{84.99g} =0.0635mol NaNO_{3}[/tex])

once you have that done you can use the molarity equation to get the answer

[tex]M=\frac{0.0635mol}{0.350ml} =0.181428[/tex]

now you need to round to the correct sig fig which will give you the correct answer of 0.18moles

Show ur working:
What mass of sulfur trioxide is formed from 96g of sulfur dioxide?

2 SO2+O2 –> 2 SO3

Answers

Answer:

120 g SO3

Explanation:

128 g SO2  -> 160 g SO3

 96 g SO2  -> x

x= (96 g SO2 * 160 g SO3)/128 g SO2

x= 120 g SO3

The mass of sulfur trioxide, SO₃, formed is 120 g

The balanced equation for the reaction is given below:

2SO₂ + O₂ —> 2SO₃

Next, we shall determine the mass of SO₂ that reacted and the mass of SO₃ produced from the balanced equation. This can be obtained as follow:

Molar mass of SO₂ = 32 + (16×2)

= 32 + 32

= 64 g /mol

Mass of SO₂ from the balanced equation = 2 × 64 = 128 g

Molar mass of SO₃ = 32 + (16×3)

= 32 + 48

= 80 g /mol

Mass of SO₃ from the balanced equation = 2 × 80 = 160 g

Thus,

From the balanced equation above,

128 g of SO₂ reacted to produce 160 g of SO₃.

Finally, we shall determine the mass of SO₃ by the reaction of 96 g of SO₂. This can be obtained as follow:

From the balanced equation above,

128 g of SO₂ reacted to produce 160 g of SO₃.

Therefore, 96 g of SO₂ will react to produce = [tex]\frac{96 X 160}{128}\\\\[/tex] = 120 g of SO₃.

Therefore, the mass of SO₃ formed is 120 g

Learn more: https://brainly.com/question/18474161

An insoluble solid has a mass of 80.0 g . It is placed in a graduated cylinder containing 40.0 mL which then rises to 80.0 mL. What is the density of the solid?

a
(A) 0.300 g/mL
b
(B) 0.50 g/mL
c
(C) 2.00 g/mL

d
(D) 3.33 g/mL

Answers

Answer:

The correct answer is (B) 0.50 g/mL

Explanation:

The density of a subtance is equal to the ratio between its mass and its volume, as follows:

d = m/v

In the problem, the mass is equal to 80.0 g. The volume is given by the increment in volume in the graduated cylinder when the solid is placed because the solid is insoluble so it displaces the liquid and increases the volume. The initial volume was 40.0 ml and the final volume was 80.0 ml, so:

V = Final volume - initial volume = 80.0 ml - 40.0 ml = 40.0 ml

Finally, we calculate the density by dividing the mass into the volume:

[tex]d= \frac{m}{v} = \frac{80.0 g }{40.0 ml} = 0.50 g/ml[/tex]

How many grams of NaCl are needed to prepare 1.20 liters of a 2.00 M solution?

Answers

Answer:

140 grams NaCl is needed

Explanation:

i used this How many grams of NaCl in 50 mL of 0.75 M NaCl solution? The MOLARITY of a solution is determined by the ratio of moles of solute, (the material being dissolved), compared to the liters of solution. the equation is M = mol L For this NaCl solution we have a Molarity of 0.75 in 50 mL of solution. Then i multiplied it by the correct amount

what is the radioactive nucleus before it decays​

Answers

Answer:

Alpha decay is one type of radioactive decay, in which an atomic nucleus emits an alpha particle, and thereby transforms (or "decays") into an atom with a mass number decreased by 4 and atomic number decreased by 2.

Explanation:

Which element easily loses one electron to form a positive ion? A. Magnesium (Mg) B. Lithium (Li) C. Nitrogen (N) D. Fluorine (F)

Answers

Answer: Lithium (Li)

Explanation:

Once it loses its only valence electron, there’s no longer a negative charge.

This group of fungi has reproductive cells with flagella so that they can swim

Answers

Answer:

The answer would be chytrids.

Chytridiomycota (chytrids) is a group of fungi that has reproductive cells with flagella so that they can swim.

What is Chytridiomycota?

The fungus known as the amphibian chytrid fungus only infects frogs. A frog uses its skin to maintain homeostasis. The chytrid fungus ruins the frog's ability to swallow, exchange ions, and function normally when it affects its skin.

The fungus targets the keratin-containing areas of a frog's skin. Frogs have trouble breathing because they use their skin for respiration.

As a class of fungi, chytrids are regarded as the most basic. They are primarily aquatic, and the only fungus cells known to contain flagella are those of the gametes. They can reproduce asexually or sexually; the latter method produces zoospores.

Therefore, a class of fungi known as chytrids possesses reproductive cells with flagella that allow them to swim.

To learn more about Chytridiomycota, refer to the link:

https://brainly.com/question/4086352

#SPJ2

Which statement best describes liquid water and water vapor at equilibrium?
A. Liquid water stops entering the gas phase.
O B. The concentration of liquid water equals the concentration of
water vapor.
C. The concentrations of liquid water and water vapor are stable.
D. The concentration of liquid water is zero.

Answers

C. The concentrations of liquid water and water vapor are stable. it describes the fact that liquid water and water vapor are at equilibrium.

EquilibriumAn equilibrium is achieved when no more water vapor can enter into the gas phase from the liquid water during evaporation process. This happens when a saturation is attained between liquid water and the vapor phase.

Hence, option (c) is correct. The concentration of liquid water and water vapor will become stable.

Learn more about water vapor:

https://brainly.com/question/17259832

Will someone actually help me and not just something random

Answers

Answer:

D

Explanation:

Which of these is a conversion from chemical energy to mechanical energy?

A. A dark light bulb starting to glow

B. A ball rolling down a hill

C. A person lifting a weight

D. A potato being heated in an oven

Answers

Answer:

C . A person lifting a weight

The theoretical yield is the amount of product actually produced.

a. True
b. False

Answers

Answer:

a. True

Explanation:

Theoretical yield is the amount of product that could be obtained if a chemical reaction has 100% efficiency.

Hope it helps...

Falseee
It is actually The amount of product measured in grams that you would theoretically produce is every atom of the reactants reacted
Other Questions
Which statement best explains the difference between paraphrasing and summarizing? Summarizing is restating all of the ideas and details in a text, while paraphrasing is restating the central idea of the text. Paraphrasing is restating all of the ideas and details in a text, while summarizing is restating the central idea of the text. Paraphrasing is copying a text word for word, while summarizing is restating the text in ones own words. Summarizing is copying a text word for word, while paraphrasing is restating the text in ones own words. Butterflies usually are identified by the colors and patterns on their wings. Butterflies have four wings: The two wings near the butterflys head are forewings while the wings near the butterflys tail are hindwings. You can use the following dichotomous key to identify four common butterfly species in North America. The graph shows the relationship between mass and volume for pure silver. Use the graph to determine the density of pure silver to the nearest tenth and complete the explanation of how do you find the densityThe density is equal to the A. RunB. RiseC. SlopeD. DegreeThe density of sliver is approximately __ g/cm cube HELP ASAP!!!!! Characteristic of Mosses? 1. Vascular tissue 2. Flowers 3. Seeds 4. Rhizoids Find the area of the shaded region and choose the appropriate result? A fair die is thrown. What is the probability that the score is not a factor of 6?00005/61/62/31/2 Was the United States justified in its invasion of Cuba (i.e. the Bay of Pigs)? What U.S. valuesor policies do you think motivated this event? 4 PLZ HELP 11 pointsSelect the correct answer.What was the purpose of the Black Codes?A. to restrict the rights of freed slavesB. to provide freed slaves with the ability to voteC. to ensure freed slaves would receive equal payD. to allow freed slaves to buy property webbed feet to help with swimming is it physical or behavior adaptation Which quotation most accurately explains why Douglass wrote this narrative? "It was this everlasting thinking of my condition that tormented me." "The more I read, the more I was led to abhor and detest my enslavers." "It had given me a view of my wretched condition, without the remedy." "I loathed them as being the meanest as well as the most wicked of men."PLEASE ANSWER ASAP ASAP BRAINLIEST to whoever get this correct. Which of the following are good ideas to use when gathering your resources?Check ALL that apply. A Write down the factsB. Draw a diagramC. List potential formulas.D. Organize into a table.E. Form an equationF. Guess at the solution and see if you are close What are the solution(s) of the quadratic equation 98 - x2 = 0?x = +27x= 163x = 17/2no real solution BRAINLIEST FOR FIRST RIGHT ANSWER!!!!!!!!! The owner of a local sandwich shop is considering revising the lunch menu and wants to know which types of sandwiches his customers prefer. Which population should the owner survey to best answer this question? A.Employees of the shop. B.Regular customers of the sandwich shop. C.Merchants from whom the owner buys his food supplies. D.Owners of other sandwich shops in the town. ASAP! PLEASE HELP. What is the measure of BCD? How many grams of ammonia (NH3) are present in 5.0L of a 0.050M Solution?A. 5.2gB. 4.3gC. 4.3molD. 78g Maintaining a competitive business environment is an important role of ________ in the economy.. corporationsB. governmentC. the banking systemD. colleges and universities show that 3/5 id bigger than 5/9 Fossils of a species of bear are found in layer 5. Which layer is most likely tohave organisms that lived at the same time as the bear species? Find the area. Will mark brainliest. In the United States, birth weights of newborn babies are approximately normally distributed with a mean of ? = 3,500 g and a standard deviation of ? = 500 g. According to the empirical rule, 68% of all newborn babies in the United States weigh between and .