Explain briefly how Karl Popper applies his concept "Verisimilitude to describe the *Progress of science'. (ii) Explain briefly the views of Karl Popper regarding ‘Ad-hoc modification of theories. (iii) How does Popper apply his above-mentioned views regarding the ad-hoc modifications of theories to show that Karl Marx's theory on the evolution of societies is pseudo- science? (iv) What is the main draw-back of Popper’s method of falsification?

The angular magnification of the telescope is -40.

To calculate the angular magnification (M) of a telescope, you can use the formula:

M = (-) (focal length of the objective) / (focal length of the eyepiece)

Given that the focal length of the objective (f_obj) is 100 cm and the focal length of the eyepiece (f_eye) is 2.50 cm, we can substitute these values into the formula:

M = (-) (100 cm) / (2.50 cm)

M = -40

The angular magnification of the telescope is -40. Note that the negative sign indicates that the image formed is inverted.

Learn more about angular magnification

brainly.com/question/31393439

#SPJ11

To determine how long the ball is in the air, we need to consider its motion as it goes up and then comes back down so when a ball is thrown straight up into air at 49m/s. For 10s ball is in the air.

The correct answer is option B.

To determine how long the ball is in the air, we need to consider its motion as it goes up and then comes back down. We can calculate the time it takes for the ball to reach its highest point and then double that time to find the total time in the air.

Given:

Initial velocity (u) = 49 m/s

a) To find the time for the ball to reach its highest point, we can use the formula:

v = u + gt

Where:

v is the final velocity,

u is the initial velocity,

g is the acceleration due to gravity (approximately -9.8 m/s²),

t is the time.

At the highest point, the ball's final velocity is 0 m/s. Substituting the given values, we have:

0 = 49 m/s + (-9.8 m/s²)[tex]t_highest[/tex]

Solving for [tex]t_highest[/tex], we get:

[tex]t_highest[/tex] = 49 m/s / 9.8 m/s² ≈ 5 s

The time for the ball to reach its highest point is approximately 5 seconds.

b) To find the total time in the air for 8 seconds, we simply double the time to reach the highest point

Total time = 2 *[tex]t_highest[/tex] = 2 * 5 s = 10 s

c) To find the total time in the air for 10 seconds, we again double the time to reach the highest point:

Total time = 2 * [tex]t_highest[/tex] = 2 * 5 s = 10 s

d) To find the total time in the air for 7 seconds, we compare it to the time to reach the highest point:

7 s <[tex]t_highest[/tex]

Therefore, the ball is not in the air for 7 seconds.

For more such information on: motion

https://brainly.com/question/26083484

#SPJ8

The null hypothesis states that the distribution of fatal injuries for riders not wearing a helmet follows the distribution for all riders, while the alternative hypothesis states that it does not follow the distribution for all riders. We can use the level of significance, which is typically set at 0.05, to test this hypothesis.

In hypothesis testing, the null hypothesis is the hypothesis that is being tested, while the alternative hypothesis is the hypothesis that is being considered if the null hypothesis is rejected. The null hypothesis in this case is that the distribution of fatal injuries for riders not wearing a helmet follows the distribution for all riders, while the alternative hypothesis is that it does not follow the distribution for all riders. To test this hypothesis, we can use the level of significance, which is typically set at 0.05. This means that we would reject the null hypothesis if the probability of getting the observed result under the null hypothesis is less than 0.05.

Therefore, the null hypothesis states that the distribution of fatal injuries for riders not wearing a helmet follows the distribution for all riders, while the alternative hypothesis states that it does not follow the distribution for all riders. We can use the level of significance, which is typically set at 0.05, to test this hypothesis.

To know more about null hypothesis, visit:

https://brainly.com/question/30821298

#SPJ11

The force acting on a particle has a magnitude (a) The x-component of the force is 139.5 N. (b) The y-component of the force is 86.3 N.

To determine the x- and y-components of the force, we can use trigonometry. The given force has a magnitude of 162 N and is directed 32.4° above the positive x-axis.

(a) The x-component of the force is given by the equation:

x-component = force * cos(angle)

Plugging in the values:

x-component = 162 N * cos(32.4°) ≈ 139.5 N

(b) The y-component of the force is given by the equation:

y-component = force * sin(angle)

Plugging in the values:

y-component = 162 N * sin(32.4°) ≈ 86.3 N

Therefore, the x-component of the force is approximately 139.5 N and the y-component of the force is approximately 86.3 N.

To know more about force, refer here:

https://brainly.com/question/13014979#

#SPJ11

a) The maximum height of the ball is 11.52 m. b) The time ball is in the air before coming back is 3.06 seconds. c) The time ball takes to reach maximum height is 1.53 seconds.

The maximum height achieved by the ball is 11.52 m. To find the maximum height, we use the formula for displacement S = ut + 1/2 gt² = 15t + 1/2 × (-9.8) t² = 15t - 4.9 t². Here, u = 15 m/s, g = -9.8 m/s² and time taken to reach maximum height, t = 1.53 seconds.

The time ball is in the air before it comes back is 3.06 seconds. To find the total time taken by the ball to return to the ground, use the formula for time as t = (v - u) / g = (0 - 15) / (-9.8) = 1.53 seconds. So, the total time taken by the ball to return to the ground = 2t = 2 × 1.53 = 3.06 seconds.

Time taken by the ball to reach the maximum height is the time taken to reach the highest point from the time of throwing the ball upward. Time taken to reach the maximum height, t = 1.53 seconds.

Learn more about height here:

https://brainly.com/question/27899573

#SPJ11

Part a) The frequency that the moth detects is 86.33 kHz. Part b) The frequency that the bat detects in the returning echo from the moth is 100.01 kHz.

Ultrasonic waves are sound waves with frequencies greater than can be heard by humans. Bats find their way and search for food by emitting and detecting reflections of ultrasonic waves. A bat emits ultrasound at frequency f be = 93.67 kHz while flying with a velocity = 12.00 î as it chases a moth that flies with velocity V m = 6.00 î. Part a) The frequency that the moth detects can be calculated using the Doppler effect formula: f_ m = f_ be(1 + V_ b/V_ w) / (1 + V_ m/V_ w )f_ be = 93.67 kHz V_ b = 12 î V_ w = 343 m/s V_ m = 6 î Putting all the values in the above formula: f_ m = 86.33 kHz The frequency that the moth detects is 86.33 kHz. Part b) The frequency that the bat detects in the returning echo from the moth can be calculated using the Doppler effect formula: f_ b = f_ be(1 + V_ b/V_ w) / (1 - V_ m/V_ w)f_ be = 93.67 kHz V_ b = 12 î V_ w = 343 m/s V_ m = 6 î Putting all the values in the above formula: f_ b = 100.01 kHz  The frequency that the bat detects in the returning echo from the moth is 100.01 kHz.

Know more about frequency, here:

https://brainly.com/question/29739263

#SPJ11

During time interval t2, the voltage is decreasing from the maximum value to 0, as the magnetic flux linkage with the coil is reduced.

When an isolated magnetic North pole is discovered and dropped through the set-up (magnet through a coil experiment), there is a change in magnetic flux linkage within the coil. Therefore, the induced electromotive force (EMF) will cause a voltage pattern to form.The Faraday's Law of Electromagnetic Induction states that when there is a change in magnetic flux linkage within a coil, an EMF is induced in the coil.

In this scenario, the magnetic flux linkage increases as the magnetic North pole enters the coil and decreases when it exits the coil, which will result in a change in the direction of the induced EMF within the coil.The voltage pattern obtained from the experiment depends on the rate at which the magnetic North pole is dropped through the set-up and the number of turns of the coil.

To know more about magnetic flux visit:-

https://brainly.com/question/1596988

#SPJ11

A) The magnification produced by the objective lens is -1/2. B) The angular magnification produced by just the eyepiece lens is approximately -0.107.

Lateral magnification is given by the ratio of the size of the image (I) to the size of the object (O). Since the image is inverted, this ratio is negative. So, the lateral magnification of the objective lens is given by:M = -I/O The objective lens has a focal length of f1 = 0.15 cm and is adjusted for relaxed viewing, meaning that the final image is at an infinite distance from the eye.

As a result, the distance between the objective lens and the eyepiece lens, d = 20 cm, is equal to the focal length of the eyepiece lens. Assume that the distance between the object and the objective lens is equal to the focal length of the objective lens, f1 = 0.15 cm.

Then, the distance between the objective lens and the image produced by the objective lens, d1 = f1(1 + M1), is also equal to 20 cm.Substituting the given values into the formula for the magnification produced by the objective lens:M1 = -d1/f1 = -(f1(1 + M1))/f1M1 = -1/2

Angular magnification is given by the ratio of the angle subtended by the image (θ') to the angle subtended by the object (θ). Since the image is magnified and inverted, this ratio is negative. So, the angular magnification of the eyepiece lens is given by:A = -θ'/θ

The final image produced by the objective lens is a real and inverted image, which is then used as the object for the eyepiece lens. Assume that the distance between the eyepiece lens and the final image is equal to the focal length of the eyepiece lens, f2 = 1.4 cm.

Then, the distance between the object (real and inverted) and the eyepiece lens is given by:d2 = f2Substituting the given values into the formula for the angular magnification produced by the eyepiece lens:A = -f1/f2A = -(0.15 cm)/(1.4 cm)A ≈ -0.107 Therefore, the angular magnification produced by just the eyepiece lens is approximately -0.107.

Know more about Lateral magnification here:

https://brainly.com/question/31595015

#SPJ11

The image of the belt buckle seen in the mirror is 0.01 times the height of the actual object, and it is inverted.

The image formed in a mirror depends on the position of the object from the mirror and its size and orientation with respect to the mirror. The distance of an object from a mirror is known as its image distance and is denoted by v, while the distance of an object from a mirror is known as its object distance and is denoted by u. The focal length of the mirror is denoted by f. In this case, the image distance v, object distance u, and the radius of curvature R are equal to the focal length f. The object distance u is 2.4 mm from the mirror, while the distance between the belt buckle and the eyes is 0.74 mm. Hence, the image distance v = f = R = 2.4 mm. The magnification of the image formed is given by the ratio of the height of the image to the height of the object. Since the belt buckle is below the eyes, the image is inverted and the height of the image is -0.74 mm. The height of the object is the distance between the eyes and the belt buckle, which is 74 mm. Hence, the magnification is given by:-0.74/74 = -0.01. The negative sign indicates that the image is inverted.

To know more about focal length, visit:

https://brainly.com/question/2194024

#SPJ11

Velocity of piece C (v₃) is 0 m/s, meaning it comes to a stop after the block shatters. Thus, the direction of the smallest piece of ice (C) immediately after the shattering is stationary (not moving).

(a) To calculate the speed and direction of the smallest piece of ice (C) immediately after the block has shattered, we can apply the conservation of linear momentum.

Given:

Mass of piece A (m₁) = 0.90 kg

Mass of piece B (m₂) = 0.80 kg

Mass of piece C (m₃) = 0.10 kg

Speed of piece A (v₁) = -0.60 m/s (negative x-direction)

Speed of piece B (v₂) = 0.40 m/s (positive y-direction)

The total momentum before the block shatters is equal to the total momentum after the shattering. The momentum is given by:

Initial momentum = (mass of A × velocity of A) + (mass of B × velocity of B) + (mass of C × velocity of C)

Since piece C is the smallest piece, its mass (m₃) is the smallest. Let the speed of piece C be v₃. The momentum after the shattering is given by:

Final momentum = (mass of A × velocity of A) + (mass of B × velocity of B) + (mass of C × velocity of C)

According to the conservation of linear momentum, the initial momentum and final momentum are equal:

Initial momentum = Final momentum

Solving for v₃:

(mass of A × velocity of A) + (mass of B × velocity of B) + (mass of C × velocity of C) = (mass of A × velocity of A) + (mass of B × velocity of B) + (mass of C × v₃)

(0.90 kg × -0.60 m/s) + (0.80 kg × 0.40 m/s) + (0.10 kg × v₃) = (0.90 kg × -0.60 m/s) + (0.80 kg × 0.40 m/s) + (0.10 kg × v₃)

Simplifying the equation, we find:

0.10 kg × v₃ = 0

This implies that the velocity of piece C (v₃) is 0 m/s, meaning it comes to a stop after the block shatters. Thus, the direction of the smallest piece of ice (C) immediately after the shattering is stationary (not moving).

(b) (i) The resulting change in gravitational potential energy will be negative. When an object moves closer to a gravitational field, its gravitational potential energy decreases, resulting in a negative change.

(ii) To calculate the change in gravitational potential energy, we can use the formula:

Change in gravitational potential energy = - G * (mass of the sphere) * (mass of the particle) / (final distance - initial distance)

Given:

Mass of the sphere = 4.5 × 10^7 kg

Mass of the particle = 5.0 × 10^-3 kg

Initial distance = 12 m

Final distance = 160 m

Gravitational constant (G) = 6.67 × 10^-11 N m²/kg²

Change in gravitational potential energy = - (6.67 × 10^-11 N m²/kg²) * (4.5 × 10^7 kg) * (5.0 × 10^-3 kg) / (160 m - 12 m)

Calculating the change in gravitational potential energy will give us the numerical value.

(iii) The change in gravitational potential energy does not depend on the path taken by the particle. It only depends on the initial and final positions and the masses involved. Therefore, whether the particle moves in a straight line or follows a complicated path

, the change in gravitational potential energy remains the same.

(iv) Substituting the values into the formula from part (ii):

Change in gravitational potential energy = - (6.67 × 10^-11 N m²/kg²) * (4.5 × 10^7 kg) * (5.0 × 10^-3 kg) / (160 m - 12 m)

Calculating this expression will give us the numerical value of the difference in gravitational potential between the particle's initial position (12 m from the centre of the sphere) and its final position (160 m from the centre of the sphere).

To know more about Velocity, visit

https://brainly.com/question/24445340

#SPJ11

The speed of the mass at the bottom of the pendulum is approximately 4.4 m/s.

The speed of the mass at the bottom of the pendulum can be calculated using the principle of conservation of mechanical energy. At the highest point, all the potential energy is converted into kinetic energy at the bottom, neglecting any energy losses due to friction.

The potential energy at the highest point is given by the equation:

Potential Energy = mass × gravitational acceleration × height

Since the mass is held out horizontally, the height is equal to the length of the string, which is 1.5 m.

The kinetic energy at the bottom is given by the equation:

Kinetic Energy = 0.5 × mass × velocity^2

To find the speed at the bottom, we equate the potential energy to the kinetic energy:

mass × gravitational acceleration × height = 0.5 × mass × velocity^2

Simplifying and solving for velocity, we get:

velocity = sqrt(2 × gravitational acceleration × height)

Substituting the values, we get:

velocity = sqrt(2 × 9.8 m/s^2 × 1.5 m) ≈ 4.4 m/s

The speed of the mass at the bottom of the pendulum is approximately 4.4 m/s. This calculation is based on the conservation of mechanical energy, equating the potential energy at the highest point to the kinetic energy at the bottom. The length of the string is 1.5 m, and the gravitational acceleration is taken as 9.8 m/s^2.

To know more about pendulum visit:

https://brainly.com/question/29813582

#SPJ11

An object must travel at a speed of 0.14 times the speed of light for its total energy to be 1% more than its rest energy. To have its total energy 99% more than its rest energy, the object must travel at a speed of 0.8654 times the speed of light.

To determine how fast must an object travel for its total energy to be 1% more than its rest energy and 99% more than its rest energy, we use the formula for relativistic kinetic energy K = (γ - 1)mc² where γ = 1/√(1 - v²/c²). The object must travel at a speed of 0.14 times the speed of light for its total energy to be 1% more than its rest energy.

Similarly, the object must travel at a speed of 0.8654 times the speed of light for its total energy to be 99% more than its rest energy. The speed at which an object must travel to achieve relativistic speeds becomes closer and closer to the speed of light as the object's total energy approaches infinity. At the speed of light, an object's total energy would be infinite.

Learn more about relativistic speeds here:

https://brainly.com/question/15280441

#SPJ11

a) The number of moles of helium in the container is approximately 0.002848 mol.

b) The new temperature that causes the absolute pressure of the helium to increase to 5.525 bar (assuming constant volume) is approximately 925.565 K.

c) The absolute pressure of the helium when the volume of the container changes to 34.4 L (assuming isothermal process) is approximately 0.002208 atm.

d) The new volume of the container when the helium's temperature decreases to 43 ºC by an isobaric process is approximately 34.1285% of the initial volume, or 0.0344 m^3 * 0.341285 ≈ 0.011760 m³.

a) To calculate the number of moles of helium in the container, we can use the ideal gas law:

PV = nRT

Where:

P = pressure (in atm)

V = volume (in m³)

n = number of moles

R = ideal gas constant (0.0821 L·atm/mol·K)

T = temperature (in Kelvin)

P = 2.208 atm

V = 0.0344 m³

T = (145.4 - 32) / 1.8 + 273.15 = 369.261 K (converted from ºF to Kelvin)

Rearranging the equation, we have:

n = PV / RT

n = (2.208 atm * 0.0344 m³) / (0.0821 L·atm/mol·K * 369.261 K)

n = 0.002848 moles

Therefore, the number of moles of helium in the container is approximately 0.002848 mol.

b) To calculate the new temperature that causes the absolute pressure of the helium to increase to 5.525 bar (which is 5.525 atm), we can use the ideal gas law again:

P1 / T1 = P2 / T2

Where:

P1 = initial pressure (2.208 atm)

T1 = initial temperature (369.261 K)

P2 = final pressure (5.525 atm)

T2 = final temperature (unknown)

Rearranging the equation, we have:

T2 = T1 * (P2 / P1)

T2 = 369.261 K * (5.525 atm / 2.208 atm)

T2 = 925.565 K

Therefore, the new temperature that causes the absolute pressure of the helium to increase to 5.525 bar (assuming constant volume) is approximately 925.565 K.

c) To calculate the absolute pressure of the helium when the volume changes to 34.4 L (converted from 0.0344 m³) by means of an isothermal process, we can use the ideal gas law:

P1 * V1 = P2 * V2

Where:

P1 = initial pressure (2.208 atm)

V1 = initial volume (0.0344 m^3)

P2 = final pressure (unknown)

V2 = final volume (34.4 L)

Rearranging the equation, we have:

P2 = (P1 * V1) / V2

P2 = (2.208 atm * 0.0344 m³) / 34.4 L

P2 = 0.002208 atm

Therefore, the absolute pressure of the helium when the volume of the container changes to 34.4 L (assuming isothermal process) is approximately 0.002208 atm.

d) If the helium's temperature decreases to 43 ºC (which is 316.15 K) by an isobaric process (constant pressure), we can use the ideal gas law again to calculate the new volume:

V1 / T1 = V2 / T2

Where:

V1 = initial volume (unknown)

T1 = initial temperature (925.565 K)

V2 = final volume (unknown)

T2 = final temperature (316.15 K)

Rearranging the equation, we have:

V2 = (V1 * T2) / T1

Since the process is isobaric, the pressure remains constant, and we can use the ratio of the temperatures:

V2 = (V1 * 316.15 K) / 925.565 K

Simplifying further:

V2 = V1 * 0.341285

Therefore, the new volume of the container when the helium's temperature decreases to 43 ºC by an isobaric process is approximately 34.1285% of the initial volume, or 0.0344 m³ * 0.341285 ≈ 0.011760 m³.

To know more about ideal gas law, refer to the link below:

https://brainly.com/question/6534096#

#SPJ11

The maximum kinetic energy of the ejected electron is approximately [tex]\(4.51 \times 10^{-19}\, \text{J}\)[/tex], and its maximum speed is approximately [tex]\(5.79 \times 10^5\, \text{m/s}\)[/tex]. the critical frequency below which no electrons are ejected from sodium is approximately [tex]\(9.27 \times 10^{14}\, \text{Hz}\)[/tex].

The kinetic energy of electrons emitted when yellow light of [tex]\(\lambda = 600\)[/tex] nm is incident on sodium is approximately [tex]\(2.15 \times 10^{-19}\, \text{J}\)[/tex].

a) To calculate the maximum kinetic energy [tex](\(E_{\text{max}}\))[/tex] and speed [tex](\(v_{\text{max}}\))[/tex] of an electron ejected from a sodium surface in the photoelectric effect, we can use the following formulas:

[tex]\[E_{\text{max}} = h \cdot \nu - \phi\]\\\\\v_{\text{max}} = \sqrt{\frac{{2E_{\text{max}}}}{{m_e}}}\][/tex]

where:

[tex]\(h\) is Planck's constant (\(6.62607015 \times 10^{-34}\, \text{J}\cdot\text{s}\))[/tex],

[tex]\(\nu\)[/tex] is the frequency of the incident light [tex](\(\frac{c}{\lambda}\), where \(c\)[/tex] is the speed of light and [tex]\(\lambda\)[/tex] is the wavelength of the light),

[tex]\(\phi\)[/tex] is the work function of sodium (in electron volts, eV),

[tex]\(m_e\)[/tex] is the mass of an electron [tex](\(9.10938356 \times 10^{-31}\, \text{kg}\))[/tex].

Given:

Wavelength of the incident light [tex](\(\lambda\))[/tex] = 410 nm [tex](\(410 \times 10^{-9}\, \text{m}\))[/tex],

Work function of sodium [tex](\(\phi\))[/tex] = 2.28 eV [tex](\(2.28 \times 1.602176634 \times 10^{-19}\, \text{J}\))[/tex].

First, calculate the frequency of the incident light:

[tex]\[\nu = \frac{c}{\lambda} = \frac{3 \times 10^8\, \text{m/s}}{410 \times 10^{-9}\, \text{m}} \\\\= 7.317 \times 10^{14}\, \text{Hz}\][/tex]

Now substitute the values into the equations to calculate [tex]\(E_{\text{max}}\) and \(v_{\text{max}}\)[/tex]:

[tex]\[E_{\text{max}} = (6.62607015 \times 10^{-34}\, \text{J}\cdot\text{s}) \cdot (7.317 \times 10^{14}\, \text{Hz}) - (2.28 \times 1.602176634 \times 10^{-19}\, \text{J})\]\\\v_{\text{max}} = \sqrt{\frac{{2 \cdot E_{\text{max}}}}{{9.10938356 \times 10^{-31}\, \text{kg}}}}\][/tex]

After evaluating the equations, we find:

[tex]\(E_{\text{max}} \approx 4.51 \times 10^{-19}\, \text{J}\)[/tex]

[tex]\(v_{\text{max}} \approx 5.79 \times 10^5\, \text{m/s}\)[/tex]

Therefore, the maximum kinetic energy of the ejected electron is approximately [tex]\(4.51 \times 10^{-19}\, \text{J}\)[/tex], and its maximum speed is approximately [tex]\(5.79 \times 10^5\, \text{m/s}\)[/tex].

b) The critical frequency [tex](\(\nu_{\text{c}}\))[/tex] is the threshold frequency below which no electrons are ejected. It can be calculated using the formula:

[tex]\[\nu_{\text{c}} = \frac{{\phi}}{{h}}\][/tex]

Substituting the values into the formula:

[tex]\[\nu_{\text{c}} = \frac{{2.28 \times 1.602176634 \times 10^{-19}\, \text{J}}}{{6.62607015 \times 10^{-34}\, \text{J}\cdot\text{s}}}\][/tex]

After evaluating the equation, we find:

[tex]\(\nu_{\text{c}} \approx 9.27 \times 10^{14}\, \text{Hz}\)[/tex]

Therefore, the critical frequency below which no electrons are ejected from sodium is approximately [tex]\(9.27 \times 10^{14}\, \text{Hz}\)[/tex].

c) To calculate the kinetic energy of electrons emitted when yellow light of [tex]\(\lambda = 600\)[/tex] nm is incident on sodium, we can use the same formula as in part (a):

[tex]\[E_{\text{max}} = h \cdot \nu - \phi\][/tex]

Given:

Wavelength of the yellow light [tex](\(\lambda\))[/tex] = 600 nm [tex](\(600 \times 10^{-9}\, \text{m}\))[/tex]

Calculate the frequency of the yellow light:

[tex]\[\nu = \frac{c}{\lambda} = \frac{3 \times 10^8\, \text{m/s}}{600 \times 10^{-9}\, \text{m}} \\\\= 5 \times 10^{14}\, \text{Hz}\][/tex]

Substitute the values into the equation to calculate [tex]\(E_{\text{max}}\)[/tex]:

[tex]\[E_{\text{max}} = (6.62607015 \times 10^{-34}\, \text{J}\cdot\text{s}) \cdot (5 \times 10^{14}\, \text{Hz}) - (2.28 \times 1.602176634 \times 10^{-19}\, \text{J})\][/tex]

After evaluating the equation, we find:

[tex]\(E_{\text{max}} \approx 2.15 \times 10^{-19}\, \text{J}\)\\[/tex]

Therefore, the kinetic energy of electrons emitted when yellow light of [tex]\(\lambda = 600\)[/tex] nm is incident on sodium is approximately [tex]\(2.15 \times 10^{-19}\, \text{J}\)[/tex].

d).

graph is in the image attached

KE is kinetic energy

f is frequency

Wo is work function and h is slope of the graph

fo is critical frequency

slope of the graph will represent plank's constant

know more about kinetic energy:

https://brainly.com/question/999862

#SPJ4

1 - The equilibrium temperature reached by the gold and copper can be determined using the principle of energy conservation.

The heat gained by one object is equal to the heat lost by the other object. The equation for heat transfer is:

m_gold * c_gold * (T_final - T_gold_initial) = -m_copper * c_copper * (T_final - T_copper_initial)

Substituting the given values, we can solve for the equilibrium temperature (T_final).

2 - The change in entropy (ΔS) of the copper block can be calculated using the relationship ΔS = S_final - S_initial = C * ln(T_final / T_initial), where C is the heat capacity at constant volume. Since there is no change in volume, we have AS = S * 4dU, where dU represents the change in internal energy. For no change in volume, dU is zero. Therefore, the entropy change of the copper block is zero (ΔS = 0 J/K).

3 - The total change in entropy (ΔS_total) of the gold and copper system can be calculated by summing the individual entropy changes:

ΔS_total = ΔS_gold + ΔS_copper

To know more about energy conservation, click here:

https://brainly.com/question/29775341

#SPJ11

To calculate the work done to push the block across the table, we need to consider the force required to overcome friction and maintain a steady speed.

The force of kinetic friction can be calculated using the equation: f_k = μ_k * N, where μ_k is the coefficient of kinetic friction and N is the normal force. The normal force can be determined by considering the weight of the block, which is given by: W = m * g where m is the mass of the block and g is the acceleration due to gravity. The work done to overcome friction is given by: Work = force * distance. In this case, the distance is the product of the steady speed and the time: distance = speed * time. Let's calculate the work done: First, find the normal force: N = m * g = 11.0 kg * 9.8 m/s^2 = 107.8 N. Next, calculate the force of kinetic friction: f_k = μ_k * N = 0.60 * 107.8 N = 64.68 N Now, calculate the distance traveled: distance = speed * time = 1.20 m/s * 4.00 s = 4.80 m Finally, calculate the work done: Work = force * distance = 64.68 N * 4.80 m = 310.464 J. Therefore, you must do approximately 310.464 Joules of work to push the block across the table.

To learn more about work, https://brainly.com/question/31480957

#SPJ11

(a) The approximate annual energy capacity of the power station is 48,180 TWh. (b) The energy conversion efficiency is 8.3%. (c) The amount of coal supply needed is 24,090,000,000 tonnes.

For part (a), we used the formula for annual energy capacity which takes into account the power output, hours of operation, and days of operation per year. For part (b), we used the energy obtained from burning 1 kg of coal and the energy density of coal to calculate the energy conversion efficiency. We used the formula for energy conversion efficiency and found that it is 8.3%.

For part (c), we used the amount of energy generated in one year and the energy obtained from burning 1 kg of coal to calculate the amount of coal needed. We used the formula for amount of coal needed and found that it is 24,090,000,000 tonnes.

Learn more about power output here:

https://brainly.com/question/13937812

#SPJ11

At very low driving frequencies, an RLC circuit's capacitor behaves as an open circuit, while the inductor behaves as a short circuit.

In a low driving frequency, an RLC circuit operates differently than it does at a higher frequency. When the driving frequency is close to zero, it implies the frequency is very low, and therefore the impedance of the capacitor is high, making it appear like an open circuit.

The impedance of the inductor is low, making it appear as a short circuit, due to the flow of current through an inductor that generates a magnetic field, and the magnetic field opposes any changes in current flow, the inductor stores energy in its magnetic field, which is why it is considered as a short circuit at very low driving frequencies. In conclusion, at very low driving frequencies, an RLC circuit's capacitor behaves as an open circuit, while the inductor behaves as a short circuit.

Learn more about impedance here:

https://brainly.com/question/30475674

#SPJ11

The materials price variance for Year 1 is $280 unfavorable .

So, the correct is option 3.

Material price variance formula = (AQ x AP) - (AQ x SP)

Where,

AQ = Actual Quantity

AP = Actual Price

SP = Standard Price

The calculation of the Material Price Variance for Year 1 is as follows:

(AQ × AP) - (AQ × SP)=(250 units × $12 per unit) - (250 units × $14 per unit) = $3,000 - $3,500 = -$500

The Material Price Variance for Year 1 is -$500.

Since the actual cost is more than the standard cost, it is considered unfavorable or adverse.

Therefore, the answer is $280 unfavorable. Option 3 is correct.

Learn more about price variance at:

https://brainly.com/question/23773130

#SPJ11

Abbington isolates price variances at the time of purchase. The materials price variance for Year​ 1 is 2. $500 unfavorable. Hence, option 2) is the correct answer.

Given, Actual quantity purchased = 250 units. Actual quantity used = 140 units. Units standard quantity = 110 units. Actual price paid = $12 per unit Standard price = $14 per unit. Abbington isolates price variances at the time of purchase.

To calculate the materials price variance we use the following formula: Materials price variance = (Actual price paid - Standard price) x Actual quantity purchased. Substituting the values, Materials price variance = ($12 - $14) x 250= -$2 x 250= -$500.

Therefore, the materials price variance for Year 1 is $500 unfavorable. Thus, the correct option is 2. $500 unfavorable.

To know more about price variances, refer

https://brainly.com/question/25397585

#SPJ11

The final mass of the food item less than the original mass se of the loss of water.

When cooking, it is not uncommon to notice a difference in mass between the food item before cooking and after cooking. The final mass of the food item is always less than the original mass because of the loss of water. When food is cooked, the heat applied causes the water content in the food to evaporate, causing the food item to shrink in size and weight. The amount of mass lost depends on the water content in the food item and the cooking method used.

When food is boiled, more water content evaporates due to the high temperatures, which can result in a more significant difference in mass. The final mass of the food item may also be affected by the cooking method used. For instance, frying may result in a lower loss of mass compared to boiling. In summary, the final mass of the food item is less than the original mass because of the loss of water through evaporation.

Learn more about evaporation at :

https://brainly.com/question/320765

#SPJ11

The final mass of a food item is typically less than the original mass due to the process of dehydration or water loss that occurs during cooking or other forms of food preparation. This can result in a reduction in the total weight of the food item, even though the actual amount of food present remains the same.

When food is cooked or exposed to heat, the heat causes the moisture present in the food to evaporate, and this leads to a loss of weight. As a result, the final mass of the food item is less than the original mass.

The extent to which the weight is reduced will depend on the method of cooking, the temperature at which the food is cooked, and the length of time it is cooked for. For example, when a piece of chicken is cooked on a grill, it will initially weigh more than the final weight once it is cooked. This is because as the chicken cooks, some of the moisture and fat inside it will be released, and this will evaporate.

Therefore, by the time the chicken is fully cooked, it will have lost some of its original weight due to the loss of moisture and fat. Therefore, the final mass of a food item is often less than the original mass due to the process of dehydration or water loss that occurs during cooking or other forms of food preparation.

To know more about dehydration, refer

https://brainly.com/question/29584811

#SPJ11

The total momentum of the system never changes when two or more objects collide. The correct option is B.

When two or more objects collide in a closed system, the total momentum of the system remains constant. Momentum is defined as the product of an object's mass and its velocity, given by the equation p = mv, where p is the momentum, m is the mass, and v is the velocity.

In a closed system, the total momentum before the collision is equal to the total momentum after the collision, provided that no external forces act on the system. This principle is known as the law of conservation of momentum.

Kinetic energy, on the other hand, is not conserved during collisions. Kinetic energy is given by the equation KE = (1/2)mv², where KE is the kinetic energy, m is the mass, and v is the velocity. During a collision, some of the kinetic energy may be converted into other forms, such as heat, sound, or deformation.

Therefore, while the kinetic energy of each object and the total kinetic energy of the system may change during a collision, the total momentum of the system remains constant. Hence, the correct answer is B, that the total momentum of the system never changes when two or more objects collide.

To know more about collision refer here:

https://brainly.com/question/30636941#

#SPJ11

As per the details given here, the current in the 2 Ω resistor is 3 A.

The potential difference across both resistors is the same since the 2Ω and 4Ω resistors are parallel.

In order to determine the total resistance of the parallel combination, we can apply the equivalent resistance formula for parallel resistors as follows:

[tex]\frac{1}{R_{re}} =\frac{1}{R_1} +\frac{1}{R_2}[/tex]

[tex]\frac{1}{R_{eq}} =\frac{1}{2}+ \frac{1}{4} \\\\\frac{1}{R_{eq}} = \frac{3}{4} \\\\R_{eq}=\frac{4}{3}[/tex]

Using ohm's law,

I = V/R

[tex]V_2=\frac{R_1}{R_1+R_2} (V_{total})[/tex]

[tex]V_2=\frac{2}{4/3} (12)[/tex]

So,

I = 6/2 = 3A.

Thus, the current in the 2 Ω resistor is 3 A.

For more details regarding current, visit:

https://brainly.com/question/15141911

#SPJ4

The assigned movie, as a representative art form, immerses viewers in a temporal and spatial experience, inviting them to reflect on the essence of being and their own existence, aligning with Heidegger's emphasis on ontological exploration through art.

The art piece assigned is a movie. It is considered a good representative piece of the art form due to its ability to immerse the viewer in a temporal and spatial experience.

Drawing on Heideggerian concepts, the movie reveals the essence of being through its portrayal of human existence and the unfolding of time.

The film creates a world that invites the viewer to engage with their own understanding of existence and meaning.

It prompts reflection on the nature of being and encourages a deeper exploration of one's own existence in relation to the world.

Through its narrative and cinematic techniques, the movie provides a platform for existential questioning and philosophical contemplation, aligning with Heidegger's emphasis on the ontological aspects of art.

Learn more about Heidegger's

brainly.com/question/30926585

#SPJ11

The speed of the electron is 5.5 x 10⁶ m/s after the collision.

A photon with a frequency of 2.5 × 10¹⁸ Hz collides with a metal foil, freeing an electron. A lower-energy 2.3 × 10¹⁸ Hz X-ray photon emerges from the collision. We need to find out the electron's velocity after the collision.

hf = E, where h is Planck's constant and f is the frequency.

The energy of the photon can be calculated by multiplying the Planck's constant h by the frequency f.

[tex]E = h * fE_1 = (6.626 * 10^-^3^4 J.s) * (2.5 * 10^1^8 Hz)E_1 = 1.66 * 10^-^1^5 J[/tex].

The frequency of the emitted X-ray photon is calculated in the same way.

[tex]E = h * fE_2 = (6.626 * 10^-^3^4 J.s) * (2.3 * 10^1^8 Hz)E_2 = 1.53 * 10^-^1^5 J[/tex].

The electron's kinetic energy can be calculated by subtracting the energy of the emitted photon from the energy of the incident photon.

[tex]KE = E_1 - E_2[/tex]

[tex]KE = (1.66 * 10^-^1^5 J) - (1.53 * 10^-^1^5 J)[/tex]

[tex]KE = 0.13 * 10^-^1^5 J[/tex].

To find the electron's velocity, we'll first convert the kinetic energy to joules.

[tex]KE = (1/2)mv^2v = \sqrt{(2KE/m)}[/tex] where m is the mass of the electron, which is 9.11 × 10⁻³¹ kg.

[tex]v = \sqrt{ [(2 * 0.13 * 10^-^1^5 J)/9.11 * 10^-^3^1 kg]v}[/tex] [tex]= 5.5 * 10^6 m/s[/tex] (to two significant figures).

Therefore, the speed of the electron is 5.5 x 10⁶ m/s after the collision.

For more such questions on speed, click on:

https://brainly.com/question/13943409

#SPJ8

The statement "Technician B says the voltage regulator controls the strength of the rotor's magnetic field" is true.

A voltage regulator is an electrical regulator that changes the amount of voltage in an electrical circuit. Voltage regulators can be designed to handle varying amounts of input voltage and output voltage.

Technician B states that the voltage regulator is responsible for regulating the strength of the rotor's magnetic field. This is true because the rotor's magnetic field strength is determined by the voltage that is applied to it. If the voltage regulator fails, the magnetic field strength will decrease and the motor's performance will suffer.Therefore, technician B's statement is correct.

To learn more about voltage visit;

https://brainly.com/question/32002804

#SPJ11

The change in momentum of the 5.8 kg object, hitting a wall at 38 m/s and 35° angle in a perfectly elastic collision, is -358.58 kg⋅m/s.

To find the change in momentum of the object, we first need to determine the initial and final velocities of the object after the collision.

The initial velocity of the object can be broken down into its horizontal and vertical components.

The horizontal component is given by v₀x = v₀ * cos(θ), where v₀ is the initial speed of 38 m/s and θ is the angle of 35°. Thus, v₀x = 38 m/s * cos(35°) = 31.01 m/s.

The vertical component is given by v₀y = v₀ * sin(θ), where v₀ is the initial speed of 38 m/s and θ is the angle of 35°. Thus, v₀y = 38 m/s * sin(35°) = 21.84 m/s.

Since the collision with the wall is perfectly elastic, the magnitude of the velocity will remain the same after the collision. Therefore, the final horizontal velocity will be -v₀x and the final vertical velocity will be v₀y.

The change in momentum of the object can be calculated as Δp = m * (vf - vi), where m is the mass of the object and vf and vi are the final and initial velocities, respectively.

The initial momentum of the object is given by p₀ = m * v₀, and the final momentum is given by p = m * vf.

The change in momentum is then Δp = p - p₀ = m * vf - m * v₀.

Substituting the values, we have Δp = 5.8 kg * (-31.01 m/s) - 5.8 kg * (31.01 m/s) = -358.58 kg⋅m/s.

Therefore, the change in momentum of the object is -358.58 kg⋅m/s.

To know more about momentum refer here:

https://brainly.com/question/32752505#

#SPJ11

In the given sentence, "one, by the band u2, is a song that I find very inspirational," add quotation marks around one, hence option A is correct.

Punctuation is the use of white space, traditional signals, and specific typographical elements to help readers understand and interpret written material correctly, whether they are reading it quietly or loudly.

In many writing systems, quote marks are punctuation symbols that are used in pairs to demarcate a quotation, direct speech, or a phrase.

Thus, the correct sentence is: "One," by the band u2, is a song that I find very inspirational.

Learn more about quotation marks, here:

https://brainly.com/question/31874080

#SPJ4

The linear speed required for an Earth satellite to be in a circular orbit at an altitude of 107 km above Earth's surface is approximately 7.85 km/s. The period of revolution for this satellite is around 1 hour and 34 minutes.

To explain this further, let's consider the concept of circular motion and gravitational force. When an object is in a circular orbit, it experiences centripetal force directed towards the center of the circle. In the case of a satellite orbiting the Earth, this force is provided by the gravitational pull of the Earth.

The centripetal force (F) can be calculated using the equation F = m * a, where m is the mass of the satellite and a is the acceleration towards the center of the circle. In this case, the acceleration is provided by gravity, which can be represented as g (approximately 9.8 m/s²).

Since the satellite is in a circular orbit, the centripetal force is equal to the gravitational force between the satellite and the Earth, given by the equation F = G * (m * M) / r², where G is the gravitational constant, M is the mass of the Earth, and r is the distance between the satellite and the center of the Earth.

By equating these two equations, we can solve for the speed of the satellite. The centripetal force can be rewritten as m * v² / r, where v is the linear speed of the satellite. Setting these two equal and solving for v, we get v = √(G * M / r).

Plugging in the values for G (6.67430 x 10⁻¹¹ m³ kg⁻¹ s⁻²), M (5.97219 x 10²⁴ kg), and r (107 km + 6371 km, since the altitude is given above Earth's surface), we can calculate the linear speed, which comes out to approximately 7.85 km/s.

To find the period of revolution, we can use the formula T = 2πr / v, where T is the period and π is a mathematical constant. Plugging in the values, we find the period to be approximately 1 hour and 34 minutes.

Learn more about linear speed

brainly.com/question/30397189

#SPJ11

The equation of the resultant wave is y = 0.4sin(2π0.2x)cos(2π30t), where the amplitude is 0.4 and the frequencies are 0.2 cycles per unit length (x) and 30 cycles per unit time (t).

For the equation of the resultant wave, we need to add the displacements of the two waves.

The instantaneous displacements of the two waves are given by:

y1 = 0.2sin(2π0.2x + 2π30t)

y2 = 0.2sin(2π0.2x - 2π30t)

We can use the trigonometric identity sin(a + b) = sin(a)cos(b) + cos(a)sin(b) to simplify the equation. Applying this identity, we get:

y1 + y2 = 0.2sin(2π0.2x + 2π30t) + 0.2sin(2π0.2x - 2π30t)

   = 0.2sin(2π0.2x)cos(2π30t) + 0.2cos(2π0.2x)sin(2π30t) + 0.2sin(2π0.2x)cos(2π30t) - 0.2cos(2π0.2x)sin(2π30t)

       = 0.4sin(2π0.2x)cos(2π30t)

Therefore, the equation of the resultant wave is

y = 0.4sin(2π0.2x)cos(2π30t).

This equation represents a wave with a displacement that varies sinusoidally in both space (x) and time (t).

The amplitude of the wave is 0.4, and the frequency of the wave in space is 0.2 cycles per unit length (x), while the frequency in time is 30 cycles per unit time (t).

To know more about resultant wave refer here:

https://brainly.com/question/29426885#

#SPJ11

(a) At t=0, the switch is closed for the first time. Hence, the capacitor will start to charge from 0 to the full voltage of the battery over time. The time constant τ is given by:τ = RC = 61.9 Ω × 4.00 mF = 0.247 s When the switch is closed, the capacitor acts like an open circuit (i.e., does not allow current to flow) for a very short time until it charges up. Hence, we can consider the circuit without the capacitor for t < 0 and then add the capacitor at t = 0.

According to Kirchhoff's loop rule, the voltage around the loop should be zero: iR + vC = 0 Here, i is the current in the circuit at time t, R is the resistance, vC i the voltage across the capacitor terminals. iR = i × R = (9.42 V)/(61.9 Ω) = 0.152 A Voltage across the capacitor at t = 0 is given by: vC = V0(1 - e-t/τ) = 9.42 V(1 - e-0/0.247) = 9.42 V(1 - 1) = 0 V Substituting the values in the loop rule: iR + vC = 0 we get: iR = - vC => i = - vC/R = - 0/61.9 = 0 Also, the current in the circuit at t = 0 is 0 A.(b) One time constant after the switch is closed (t = τ)Let's consider the circuit diagram again as shown below: The voltage across the capacitor terminals is given by: vC = V0(1 - e-t/τ) = 9.42 V(1 - e-τ/τ) = 9.42 V(1 - e-1) = 3.53 V According to Kirchhoff's loop rule, the voltage around the loop should be zero: iR + vC = 0Substituting the values in the loop rule: iR + vC = 0 we get: iR = - vC => i = - vC /R = - 3.53 V/61.9 Ω = - 0.057 Also, the current in the circuit at t = τ is - 0.057 A.

To get more information about Kirchhoff's loop rule visit:

https://brainly.com/question/30201571

#SPJ11

a) The current flowing through the resistor at t = 0 is 0.152 A.

b) The current flowing through the resistor one time constant after the switch is closed is 0.099 A.

Given Data; Resistor, R = 61.9 Ω, Capacitance, C = 4.00 mF = 4.00 x 10^⁻3 FEMF of battery, ε = 9.42 V.

(a) Current through the resistor at t = 0, when the switch is closed. We know that initially (i.e., for t < 0), the capacitor was uncharged. Therefore, there is no charge on the capacitor before closing the switch. When the switch is closed, the capacitor starts charging, and the current flows in the circuit. Hence, current starts flowing through the circuit instantaneously. The current is maximum at t = 0.

According to Kirchhoff's Loop Rule, we have: ε = V_R + V_C, where V_R is the potential difference across the resistor, and V_C is the potential difference across the capacitor at any time t. Since the capacitor is uncharged before closing the switch, there is no potential difference across the capacitor at t = 0.Now, applying Kirchhoff's Loop Rule, we get:ε = V_R + V_Cε = IR + (q / C) ...(1) where, I is the current in the circuit at any time t and q is the charge on the capacitor at time t=0.At t = 0, the capacitor is uncharged, so q = 0. Substituting the given values in equation (1), we get;9.42 = I x 61.9I = 0.152 A. Therefore, the current flowing through the resistor at t = 0 is 0.152 A.

(b) Current through the resistor at t = t_r = R x C = 61.9 x 4.00 x 10^⁻3 = 0.2476 s. One-time constant (t_r) after the switch is closed, the charge on the capacitor will be (1 - 1/e) times the maximum charge (q_max) on the capacitor. Hence, the potential difference across the capacitor at t = t_r is given by: V_C = q / C = q_max (1 - e^(-t/t_r)) / C. Substituting q_max = ε x C in the above equation, we get: V_C = ε (1 - e^(-t/t_r)). Therefore, the potential difference across the resistor is given by: V_R = ε - V_CV_R = ε - ε (1 - e^(-t/t_r))V_R = ε e^(-t/t_r) Substituting the value of V_R in the equation (1), we get;ε = IR + V_Cε = IR + ε (1 - e^(-t/t_r)) / CI = (ε / R) (1 - e^(-t/t_r)) Substituting the given values, we get; I = (9.42 / 61.9) (1 - e^(-0.2476 / 0.2476))I = 0.099 A. Therefore, the current flowing through the resistor one time constant after the switch is closed is 0.099 A.

To know more about Kirchhoff's Loop Rule, visit:

https://brainly.com/question/30201571

#SPJ11