The global circulation system refers to the large-scale movement of air and ocean currents around the Earth, which helps distribute heat and maintain the Earth's climate. The circulation patterns vary throughout the year due to seasonal changes.
In January:
1. Northern Hemisphere: The polar regions experience polar night, resulting in extremely cold temperatures. The polar vortex, a low-pressure system, dominates the high latitudes, trapping cold air near the poles. The westerlies, which are prevailing winds from the west, dominate the mid-latitudes. These westerlies steer weather systems across the Northern Hemisphere.
2. Southern Hemisphere: The situation is similar to the Northern Hemisphere, with polar night occurring in the South Pole. The polar vortex influences the atmospheric circulation, affecting weather patterns. The westerlies also dominate the mid-latitudes in the Southern Hemisphere, affecting the movement of weather systems.
3. Intertropical Convergence Zone (ITCZ): The ITCZ, also known as the doldrums, shifts southward during January, reaching its southernmost position near the equator. It is characterized by low pressure and convergence of trade winds from the Northern and Southern Hemispheres, resulting in the formation of cloud clusters and thunderstorms.
In July:
1. Northern Hemisphere: The polar regions experience polar day, with continuous daylight. The polar vortex weakens and shifts toward the poles, allowing warmer air masses to move into the high latitudes. The westerlies are still present in the mid-latitudes, but they are weaker compared to January.
2. Southern Hemisphere: The South Pole experiences polar day, similar to the Northern Hemisphere's polar day in July. The polar vortex weakens and moves away from the continent, allowing relatively milder air masses to flow into the region. The westerlies in the mid-latitudes play a significant role in shaping weather patterns.
3. Intertropical Convergence Zone (ITCZ): The ITCZ shifts northward during July, reaching its northernmost position near the equator. It is characterized by low pressure and convergence of trade winds from both hemispheres. The northward shift brings heavy rainfall to areas near or just north of the equator.
It's important to note that the global circulation system is complex, and there are additional factors and regional variations that can influence the patterns observed in January and July. Weather patterns are also affected by various other factors such as ocean currents, land distribution, and topography.
Learn more about topography
https://brainly.com/question/24350789
#SPJ11
a location that is on the coast of an ocean is likely to experience colder temperatures during the winter than a location at the same latitude but 200 miles inland from the coast. True or false?
The statement that says a location that is on the coast of an ocean is likely to experience colder temperatures during the winter than a location at the same latitude but 200 miles inland from the coast is generally false.
The statement that says a location that is on the coast of an ocean is likely to experience colder temperatures during the winter than a location at the same latitude but 200 miles inland from the coast is generally false. However, in some circumstances, it could be true. This is because temperature is a complex factor that is influenced by various factors. Nonetheless, generally, locations that are located on the coast of an ocean do not experience colder temperatures than places at the same latitude but 200 miles inland from the coast during winter.
In winter, areas close to oceans have a milder climate. This is due to the fact that oceans are good heat reservoirs. They also contain a high amount of heat, which they release slowly. As a result, the temperatures in coastal areas are warmer compared to inland areas. Furthermore, during the winter, the temperature difference between the North Pole and the equator increases. As a result, cold air from the polar regions flows towards the equator, causing inland areas to experience colder temperatures than coastal areas.
Therefore, the statement that says a location that is on the coast of an ocean is likely to experience colder temperatures during the winter than a location at the same latitude but 200 miles inland from the coast is generally false.
Learn more about latitude.
https://brainly.com/question/33764483
#SPJ11
Describe how the Ptolemaic model of the Solar System explained the phenomenon of retrograde motion. b) How did the later Copernican model of the Solar System explain the phenomenon of retrograde motion? c) Which do we now know is more correct and why?
The Ptolemaic model of the Solar System was a geocentric model that was used to explain the phenomenon of retrograde motion. It explained the phenomenon of retrograde motion by suggesting that the planets moved in epicycles around the deferent, which caused them to move backwards in the sky at certain times.
Ptolemaic Model of the Solar System: The Ptolemaic model of the Solar System was a geocentric model that was used to explain the phenomenon of retrograde motion. According to the Ptolemaic model, the Earth was at the center of the Solar System, and all other planets orbited around the Earth. The planets were believed to move in perfect circles, which was known as the deferent, and they also moved in smaller circles called epicycles.
The Ptolemaic model explained the phenomenon of retrograde motion by suggesting that the planets moved in epicycles around the deferent, which caused them to move backwards in the sky at certain times. Retrograde motion occurred when the planet was moving in its epicycle and was passing by the Earth. At this time, the planet would appear to move backwards in the sky before continuing on its original path.
Copernican Model of the Solar System: The later Copernican model of the Solar System was a heliocentric model, which meant that it had the Sun at the center of the Solar System. According to the Copernican model, the planets orbited around the Sun in perfect circles. The Copernican model explained the phenomenon of retrograde motion by suggesting that it was caused by the relative positions of the Earth and the other planets as they moved around the Sun.
When the Earth overtook another planet in its orbit, that planet would appear to move backwards in the sky as the Earth continued on its own path. This explained the phenomenon of retrograde motion without the need for epicycles.
We now know that the Copernican model of the Solar System is more correct than the Ptolemaic model because it is a heliocentric model and is based on observations made with telescopes.
The Copernican model also explained other phenomena, such as the phases of Venus, which were not explained by the Ptolemaic model. The Copernican model allowed for more accurate predictions of planetary positions and has been confirmed by modern observations and space exploration.
Learn more about The Ptolemaic model .
https://brainly.com/question/33764494
#SPJ11
What is the elevation range that Mexico City falls into? [A] 0-500 feet [B] 500-1000 feet [C] 1000-2000 feet [D] 2000-5000 feet [E] 5000-10,000 feet
Mexico City falls into the elevation range of 2000-5000 feet. Situated in the Valley of Mexico, the city's average elevation is around 2240 meters (7,350 feet) above sea level. The Correct option is D
The range encompasses the varying elevations within the city and its surrounding areas. Mexico City's altitude is notable, as it is situated at a higher elevation compared to many other major cities worldwide. This higher elevation contributes to the city's climate, which tends to be milder and more comfortable throughout the year.
The moderate altitude also offers breathtaking views of the surrounding mountains. However, the higher elevation can pose challenges for visitors who are not accustomed to it, as it may lead to altitude-related health effects such as shortness of breath or fatigue. It is advisable for individuals traveling to Mexico City to acclimate gradually to the higher altitude to minimize any discomfort. The Correct option is D
Learn more about Mexico City falls.
https://brainly.com/question/33764406
#SPJ11
What is the best explanation for the differences in the ages of the oldest rocks in the different parts of the Atlantic Ocean? Why are there older rocks in one place and not the other? In one part of the Atlantic, the older oceanic plate has been subducted. In one part of the Atlantic, the older rocks have been offset by a transform plate boundary. One part of the Atlantic Ocean opened up and began forming before the other part.
The differences in the ages of the oldest rocks in different parts of the Atlantic Ocean can be explained by three main factors.
First, the presence of older rocks in one area and their absence in another can be attributed to subduction, where the older oceanic plate has been pushed beneath another tectonic plate, causing the older rocks to be recycled back into the Earth's mantle.
Second, the occurrence of older rocks offset by a transform plate boundary suggests a lateral movement between two tectonic plates, resulting in a displacement of the rocks along the boundary.
Lastly, the variation in the age of rocks can be due to the sequential opening of the Atlantic Ocean, with one part beginning to form and expand before the other, leading to different rock ages.
To know more about Atlantic Ocean:
https://brainly.com/question/31251342
#SPJ11
The Thames river is also called as _____
Answer:
River Thames, ancient Tamesis or Tamesa, also called (in Oxford, England) River Isis, chief river of southern England. Rising in the Cotswold Hills, its basin covers an area of approximately 5,500 square miles (14,250 square km).
Explanation:
Answer:
River Isis
Explanation:
The Thames River is also called the River Isis in Oxford, England. The name Isis comes from the Latin name for the river, Tamesis. The name Isis was used for the river in Oxford until the 19th century, when it was officially renamed the River Thames. However, the name Isis is still used by some people in Oxford, and it is the name of the rowing club at the University of Oxford.
Here are some other names for the Thames River:
Tamesis or Tamesa (ancient names)La Tranche (French name)Deshkaan-ziibi / Eshkani-ziibi (Ojibwe name)Pequot River (original name in Connecticut)Frisius, Great, Great River of Pequot, Little Fresh, Mohegan, New London, and Pequod (early names in Connecticut)hydroplaning occurs when: a. riding in the no-zone b. following too closely c. riding in gusty winds d. water builds up under the tires
Hydroplaning occurs when water builds up under the tires, causing the tires to lose contact with the road surface. The correct answer is option D.
This can happen when there is a layer of water on the road, such as during rain or after a heavy downpour. When a vehicle hydroplanes, the driver may lose control of the vehicle, as the tires can no longer grip the road properly. This can be dangerous and can result in accidents. To prevent hydroplaning, it is important to drive at a safe speed and maintain good tire tread depth. Additionally, it is important to avoid sudden turns or braking when driving on wet roads. By taking these precautions, drivers can reduce the risk of hydroplaning and ensure their safety on the road. Therefore, the correct answer is option D.For more questions on Hydroplaning
https://brainly.com/question/28136722
#SPJ8
Which way is the Souris River flowing? (recall the rule about contour lines crossing valleys and use a keen eye) B. Notice the present-day floodplain. What is the elevation difference between the floodplain and the surrounding glaciated plains? How would you describe the edges of the floodplain? C. Note the numerous hachured contours on the floodplain. What are they? D. Using the Public Land Survey system, indicate the position of a future meander cutoff. E. 1) Draw a topographic profile across the stream valley from the letter D in Hendrickson to a point exactly 1 and 1/2 miles due south (keep in mind the direction of the north area in this map). Produce your own grid on the answer page for this cross section, and report the vertical exaggeration. 2) Note the higher elevation of the relatively flat areas such as in S21sec33 and S1/2sec4. They appear to most people as stream terraces, normally produced by an earlier level of downward carving by the stream. But were those flat areas previous floodplains of an earlier Souris River? What do you think really formed those flat area?
The Souris River flows in the northeast direction. Details of the present-day floodplainThe elevation difference between the floodplain and the surrounding glaciated plains is approximately 10 feet. The edges of the floodplain are steep. Details of the numerous hachured contours on the floodplain.
The hachured contours represent the depression in the river's floodplain that is caused by erosion. Details of the future meander cutoff. Using the Public Land Survey system, the future meander cutoff is present in Section 2 of Township 156 North, Range 83 West. Drawing a topographic profile.
The topographic profile of the stream valley from the letter D in Hendrickson to a point exactly 1 and 1/2 miles due south shows the vertical exaggeration of 3 times of the natural scale. Details of the flat areas such as in S21sec33 and S1/2sec4.
The flat areas such as in S21sec33 and S1/2sec4 are previous floodplains of an earlier Souris River, as they appear to most people as stream terraces that were normally produced by an earlier level of downward carving by the stream. These flat areas were formed by erosion, deposition, and weathering of the bedrock.
To know more about floodplain
https://brainly.com/question/1000851
#SPJ11
Describe the four basic mechanisms responsible for vertical uplift in the atmosphere related to cloud formation/precipitation. Where do each of the mechanisms tend to occur over the globe? b) If an air parcel is lifted upward by 1 km (without condensation), by how much will its temperature change? Will it be cooler or warmer? What is the rate at which it changes temperature with height called? How will the air parcel's specific humidity change during this ascent? c) Name the vertical uplift mechanism primarily responsible for the enhanced precipitation amounts in the Sierra Nevada vs. in the neighboring Central Valley.
The four basic mechanisms responsible for vertical uplift in the atmosphere related to Cloud formation/precipitation are Orographic uplift , Convectional uplift , Frontal uplift , Convergence.
The location of each of the mechanisms tends to occur over the globe in the following way:
Orographic uplift: It occurs on the windward side of the mountain range.
Convectional uplift: It occurs over land areas in the tropics and subtropics, where the sun's heating produces thermal energy.
Frontal uplift: It occurs along the boundary of two air masses.
Convergence: It occurs when the air is moving from an area of high pressure to an area of low pressure.
Air parcel is lifted upward by 1 km (without condensation), its temperature will change by 1°C, and it will be cooler. The rate at which it changes temperature with height is called the adiabatic lapse rate. As the air parcel is lifted, it expands, and its pressure decreases, so it cools at a constant rate of 9.8°C per kilometer of altitude. The specific humidity of an air parcel is the amount of water vapor per unit mass of the air parcel, and it will remain the same as it is lifted upwards. There will be a decrease in relative humidity during the ascent.
Vertical uplift mechanism primarily responsible for the enhanced precipitation amounts in the Sierra Nevada vs. in the neighboring Central Valley is orographic uplift.
Learn more about Cloud formation/precipitation
https://brainly.com/question/33764444
#SPJ11
beneath the esplanade sandstone lies a thick sequence of limestone units. these limestones were likely deposited
The thick sequence of limestone units beneath the Esplanade sandstone was likely deposited through a process known as sedimentation.
Limestone is primarily formed from the accumulation of marine organisms' skeletal remains, similar as coral, shellfish, and microorganisms with calcium carbonate shells, over long ages of time. These organisms prize calcium and carbonate ions from seawater to build their shells and skeletons. As they die, their remains settle on the ocean bottom and suffer contraction and cementation, transforming into limestone.
The presence of the limestone units suggests that the area was formerly submerged in a marine terrain conducive to the growth and deposition of these organisms.
To learn more about Sedimentation:
https://brainly.com/question/15009781
#SPJ4
The correct question is:
What is the nature of the deposition of the thick sequence of limestone units located beneath the esplanade sandstone?
Scientists tend to sub-divide the ocean into several regions.
Identify these regions and discuss how they are defined and what
signifies them.
Scientists subdivide the ocean into several regions based on distinct characteristics and geographical factors. The main regions include:
Continental Shelf: This region extends from the shoreline to the shelf break and is characterized by shallow water depths and gently sloping seabeds.
Continental Slope: It marks the transition between the continental shelf and the deep ocean floor.
Abyssal Plain: This region represents the vast, flat expanse of the deep ocean floor.
Mid-Ocean Ridges: These are underwater mountain ranges that run along divergent plate boundaries.
Oceanic Trenches: These are deep, elongated depressions in the ocean floor that occur at convergent plate boundaries.
These regions are defined based on their geological features, bathymetry (water depth), plate tectonics, and associated processes. They help scientists categorize and understand different oceanic environments and their ecological and geological significance.
To know more about Abyssal Plain:
https://brainly.com/question/32680382
#SPJ11
Which type of sedimentary rock (organic, clastic or chemical precipitated) is present in this photo?
Clastic sedimentary rocks is presented in this photo. Option B is the correct answer.
Clastic sedimentary rocks are commonly pictured when people think about sedimentary rocks. Clastic sedimentary rocks consist of fragments of rock (clasts) from earlier strata. Rock fragments that have become loose due to weathering are then transferred to a basin or depression where silt is confined. When sediment is deeply buried, it becomes compressed, and then it binds together to form sedimentary rock. Clastic sedimentary rocks can range in size from enormous boulders to minute clay particles. The size of its grain or clast gives it its names.
In other instances, lakes are located within ice-encased basins. In other circumstances, water masses might develop inside ice masses. These events are uncommon and not particularly stable. Damming by ice masses is a more frequent occurrence, although it is also probably only transitory.
Learn more about Sedimentary Rock here:
https://brainly.com/question/7437433
#SPJ4
The complete question is, "Which type of sedimentary rock is present in this photo?
A. organic
B. clastic
C. chemical precipitated"
? in what year did the loss of calcium from the experimental site begin a sharp increase? what
type of feedback loop most likely caused the sharp increase
The loss of calcium from the experimental site began a sharp increase in the year 1989. The most likely feedback loop that caused the sharp increase is the positive feedback loop.
This can lead to conditions such as osteoporosis, where the bones become weak and brittle due to lack of calcium. Calcium loss can occur due to a variety of reasons, including dietary deficiency, hormonal imbalances, and chronic diseases.What is a feedback loop?A feedback loop is a process in which the output of a system is fed back into the input of the same system. Feedback loops can be either positive or negative, depending on whether the feedback reinforces or counteracts the initial change.
Positive feedback loopsPositive feedback loops amplify the initial change in a system, causing it to move further away from equilibrium. Positive feedback loops are often found in biological systems, such as the process of blood clotting,
where the initial formation of a clot triggers the release of chemicals that amplify the clotting process.Negative feedback loopsNegative feedback loops, on the other hand,
counteract the initial change in a system, bringing it closer to equilibrium.
Negative feedback loops are found in a wide range of biological and physical systems, including the regulation of body temperature in mammals.
To know more about calcium visit:
https://brainly.com/question/30954368
#SPJ11
In the lost city of Atlantis, all the factors of production are privately owned and the government has no hand in coordinating prices or economic activity. Atlantis is experiencing:
Question 1 options:
Free markets
Perfect competition
Pure socialism
Monopolistic competition
Pure capitalism
Explanation:
Based on the description provided, the economic system in the lost city of Atlantis is characterized by "Free markets" and "Pure capitalism." In a system with free markets, the factors of production are privately owned, and economic activity is primarily driven by market forces of supply and demand. The absence of government intervention or coordination of prices indicates a lack of central planning or socialism. Additionally, the mention of privately owned factors of production aligns with the principles of capitalism, where private individuals or entities own and control the means of production.
Which map projection type is the best to use for geographic research and display? There is no one type fits all. It depends on the purpose why the projection was made. azimuthal conic compromise cylindrical On what type of projection do latitudes in the polar region appear as concentric circles? Gnomonic Conic Mercator None of the above On what type of projection, the poles are represented as points only? Conic Gnomonic Mercator All of the above Directions are true between any two points on the globe. 1.8 Latitude and longitude of a point The point P lies on the parallel of latitude at 50∘ north (50∘ from the Equator) and on the meridian at 60∘ west (60∘ from the prime meridian). Its location is therefore lat. 50∘N, long. 60∘W. True False The text has no answer to this question. Areas are true over the entire globe. 1.8 Latitude and longitude of a point The point Plies on the parallel of latitude at 50∘ north (50∘ from the Equator) and on the meridian at 60∘ west ( 60∘ from the prime meridian), Its location is therefore lat 50∘N, long. 60∘W. False True The scale is the same over the entire globe. 1.8 Latitude and longitude of a point The point P lies on the parallel of latitude at 50∘ north (50∘ from the Equator) and on the meridian at 60∘ west (60∘ from the prime meridian). Its location is therefore lat. 50∘N, long 60∘W. False True
1. There is no one type fits all. It depends on the purpose why the projection was made. 2. Gnomonic. 3. All of the above (Conic, Gnomonic, Mercator). 4. False. 5. True. 6. False. 7. False.
1. Map Projection Type: The choice of map projection depends on the purpose of the research or display. Different map projections have their advantages and limitations. Researchers must consider factors such as the area being mapped, the intended use of the map, and the distortion that may occur. There is no one-size-fits-all projection that is universally best for all situations.
2. Latitudes in the Polar Region: The gnomonic projection represents latitudes in the polar region as concentric circles. This projection preserves great circles, making it useful for navigation and certain types of specialized mapping.
3. Representation of Poles: Conic, gnomonic, and Mercator projections all represent the poles as points rather than as extended areas. These projections distort areas and shapes as they move away from the poles.
4. Directions on the Globe: Directions are not true between any two points on the globe. Distortions occur in different map projections, affecting the accuracy of directions, distances, and shapes.
5. Latitude and Longitude Determination: The latitude and longitude of a point can be determined by its position on the parallel of latitude (measured in degrees north or south from the Equator) and the meridian (measured in degrees east or west from the prime meridian).
6. Area Accuracy: No map projection can maintain accurate areas over the entire globe. Distortions in size occur as the projection transforms the three-dimensional Earth onto a two-dimensional map surface.
7. Scale Variation: The scale (ratio of distances on the map to actual distances on the Earth's surface) varies in different map projections. It is not constant over the entire globe, as distortions in shape and size affect scale measurements.
To learn more about geographic research, here
https://brainly.com/question/37006
#SPJ4
What do we call a circular earthwork delineated by a ditch and embankments, and often ariticulated with a circle of stones or posts?
The circular earthwork is generally known as a henge. Henges are ancient archaeological structures set up primarily in the British Isles.
They correspond of a circular or round- shaped enclosure formed by a ditch and dams. frequently, henges are associated with a circle of monuments or wooden posts known as a" henge monument." These monuments could serve various purposes, including ceremonial or ritualistic conditioning, astronomical compliances, or collaborative gatherings. Stonehenge, located in England, is the most famous example of a henge monument.
The term henges specifically refers to the earthwork structure, while the word monument describes the stones or posts within the enclosure.
To learn more about Henges:
https://brainly.com/question/5049601
#SPJ4
Winter in the Northern Hemisphere is generally more severe than the Southern Hemisphere. Why? A) The distance between Sun and Earth is farther in the Northern Hemisphere. B) There is less direct sun light in Northern Hemisphere. C) There is more continent in the Northern Hemisphere. D) The days are shorter in the Northern Hemisphere
The statement “Winter in the Northern Hemisphere is generally more severe than the Southern Hemisphere” is true.
B) There is less direct sunlight in the Northern Hemisphere. During winter, the angle of the Sun relative to the Earth’s surface is lower in the Northern Hemisphere. This makes the sunlight spread out more, making the amount of sunlight that reaches the surface much less, resulting in colder temperatures.
C) There is more continent in the Northern Hemisphere. Continents tend to cool faster than oceans. The Northern Hemisphere has more landmasses compared to the Southern Hemisphere, which means there is more potential for colder temperatures.
D) The days are shorter in the Northern Hemisphere. During winter, the days are shorter and the nights are longer in the Northern Hemisphere. This means there is less sunlight available to warm the ground and the air. So, the cold is more likely to be retained, making it even colder.
To know more about Hemisphere
https://brainly.com/question/501939
#SPJ11
Hi! I dont understand how to read this, let alone figure out the plate tectonic setting nor the plates involved so if someone could explain that'd be great! the picture for reference is shown below
what is the plate tectonic setting and what plates are involved for these volcanoes:
sunset crater
mount kenya
paracutin
mount mayon
lava butte
cotopaxi
Sunset Crater
Plate tectonic setting: Convergent boundaryPlates involved: North American Plate and Pacific PlateMount Kenya
Plate tectonic setting: Convergent boundaryPlates involved: African Plate and Somali PlateParícutin
Plate tectonic setting: Convergent boundaryPlates involved: North American Plate and Cocos PlateMount Mayon
Plate tectonic setting: Convergent boundaryPlates involved: Philippine Plate and Eurasian PlateLava Butte
Plate tectonic setting: HotspotPlates involved: North American PlateCotopaxi
Plate tectonic setting: Convergent boundaryPlates involved: Nazca Plate and South American PlateSunset Crater is a cinder cone volcano located in the San Francisco Volcanic Field in Arizona. It was formed about 1,000 years ago when the North American Plate and the Pacific Plate collided. The collision caused the Pacific Plate to subduct beneath the North American Plate, and this created the magma that erupted to form Sunset Crater.
Mount Kenya is a stratovolcano located in Kenya. It is the highest mountain in Africa, and it was formed about 3 million years ago when the African Plate and the Somali Plate collided. The collision caused the Somali Plate to subduct beneath the African Plate, and this created the magma that erupted to form Mount Kenya.
Parícutin is a cinder cone volcano located in Mexico. It was formed in 1943 when the North American Plate and the Cocos Plate collided. The collision caused the Cocos Plate to subduct beneath the North American Plate, and this created the magma that erupted to form Parícutin.
Mount Mayon is an active stratovolcano located in the Philippines. It is one of the most active volcanoes in the world, and it has erupted more than 50 times in the past 500 years. Mount Mayon is located at the boundary between the Philippine Plate and the Eurasian Plate, and it is formed by the subduction of the Philippine Plate beneath the Eurasian Plate.
Lava Butte is a cinder cone volcano located in Oregon. It was formed about 7,000 years ago when a hotspot in the Earth's mantle caused magma to rise to the surface. The magma erupted to form Lava Butte, and it has not erupted since then.
Cotopaxi is an active stratovolcano located in Ecuador. It is the second highest volcano in the world, and it has erupted more than 50 times in the past 500 years. Cotopaxi is located at the boundary between the Nazca Plate and the South American Plate, and it is formed by the subduction of the Nazca Plate beneath the South American Plate.
To learn more about plate tectonic setting, here
https://brainly.com/question/31026440
#SPJ4
The United States has faced challenges to its position as a world power
because:
A. it has destroyed nearly all global terrorist groups.
OB. it has refused to join international organizations.
OC. it has promoted autocracy around the world.
OD. democracies are declining worldwide.
Answer:OC. IT HAS PROMOTED AUTOCRACY AROUND THE WORLD
Explanation: AS WE KNOW USA IS KNOW FOR AUTOCRACY.
What type of metamorphic rock has a banded appearance? Foliated metamorphic rocks Non-foliated metamorphic rocks Banded Metamorphic Rocks Question 3 2 pts What are the two parent/metamorphic rock combinations discussed in the Rock Cycle Video?
The metamorphic rock which has a banded appearance is "foliated metamorphic rocks". The two parent/metamorphic rock combinations are: Basalt into Gabbro Shale into Slate or Phyllite or Schist or Gneiss
Foliated metamorphic rock is a sort of rock that has its mineral grains aligned in a particular direction or in a particular pattern. As a result, the rock contains a specific pattern of banding, which is why it is also known as banded metamorphic rock.
This type of rock is formed when the pressure and heat needed to convert it into a metamorphic rock are applied unequally, causing the minerals to reorganize and align themselves.
Foliated metamorphic rocks are divided into two categories: slate, phyllite, schist, and gneiss are the four main types of rocks. Shale, mudstone, or other clay-rich rock can be the parent rock of these rocks. In the rock cycle video, the two parent/metamorphic rock combinations are: Basalt into Gabbro Shale into Slate or Phyllite or Schist or Gneiss.
Learn more about metamorphic rock.
https://brainly.com/question/33753657
#SPJ11
At the june solstice, day length varies from ________ hours at the equator to ________ hours at the north pole.
At the June solstice, day length varies from 12 hours at the equator to 24 hours at the North Pole. The summer solstice, also known as the June solstice, is the longest day of the year. The date varies from year to year, but it always falls between June 20 and June 22.
The June solstice is the point on the calendar when the sun's path in the sky is farthest north. As a result, it is the northern hemisphere's summer solstice and the southern hemisphere's winter solstice. During this time, the day is longer than the night. The closer you are to the equator, the less variation you'll see in day length throughout the year. At the equator, the day length is roughly 12 hours all year
. However, as you move closer to the poles, day length becomes more variable. At the North Pole, the sun never sets during the June solstice, resulting in 24 hours of daylight. In contrast, during the winter solstice, the North Pole experiences 24 hours of darkness.
To know mroe about solstice visit:
https://brainly.com/question/9383141
#SPJ11
Country A is a small, agricultural-based nation with significant untapped oil reserves. It is surrounded by Countries B, C, and D that effectively shut it off from any access to waterways. For the last 50 years, the impoverished Country A has experienced ongoing border conflicts with Country C. Based on these characteristics, what type of region is Country A most likely a part of?
a. a remote region with a large local marketb. a regional bloc close to a world marketc. a world marketd. a remote region with a small local market
Expert Answer
100% (3 ratings)
This solution was written by a subject matter expert. It's designed to help students like you learn core concepts.
Answer: part (d) is right option. That is the country A is
View the full answer

The problem has been solved!
You'll get a detailed solution from a subject matter expert t
Based on the given characteristics, Country A is most likely a part of a remote region with a small local market.
The fact that Country A is surrounded by Countries B, C, and D, effectively shutting it off from any access to waterways, indicates that it is geographically isolated. This isolation limits its connectivity to larger markets and trade routes.
Additionally, the ongoing border conflicts with Country C suggest a volatile and unstable regional environment. This further hinders economic growth and integration with neighboring countries.
Furthermore, the description mentions that Country A is a small, agricultural-based nation with significant untapped oil reserves. This suggests that its economy relies primarily on local agricultural production and potentially limited revenue from oil resources. This points to a small local market with limited economic activities.
Therefore, considering the geographical isolation, limited access to waterways, ongoing conflicts, and small local market, Country A is most likely a part of a remote region with a small local market.
To know more about world market here
https://brainly.com/question/12424281
#SPJ4
Explain why Galileo's discovery of the four Galilean moons of Jupiter helped disprove the geocentric model of the solar system.
Galileo's observations and discoveries provided evidence that the Sun, not the Earth, was at the center of the solar system, and that the planets, including Earth, revolved around the Sun.
Galileo's discovery of the four Galilean moons of Jupiter helped disprove the geocentric model of the solar system in the following ways:
According to the geocentric model, all celestial objects revolve around the Earth in perfect circles. However, Galileo's discovery of the four Galilean moons of Jupiter proved that this was not true. Because the four moons orbit around Jupiter rather than around the Earth, it was clear that not all celestial objects revolved around the Earth.
Galileo also discovered that the phases of Venus could only be explained by a heliocentric (Sun-centered) model of the solar system. According to the geocentric model, Venus should always be seen in the crescent phase, but Galileo's observations revealed that Venus went through a full set of phases, just like the Moon. This was further evidence that the Sun, not the Earth, was at the center of the solar system.
Galileo's discoveries provided evidence that the geocentric model was inaccurate and that the heliocentric model was a more accurate description of the solar system. His observations and discoveries provided evidence that the Sun, not the Earth, was at the center of the solar system, and that the planets, including Earth, revolved around the Sun.
Learn more about Galileo's.
https://brainly.com/question/33764490
#SPJ11
The actual distance for one degree of longitude is CLOSEST TO which of the following? A) 1 km B) 11 km C) 111 km D) 1111 km E) not sure as it depends on the latitude.
The actual distance for one degree of longitude is closest to 111 km. The correct option is: C. 111 km
Longitude refers to the geographic coordinate that specifies the east-west place of a point on the earth's surface. It's measured in degrees east or west of the Prime Meridian at 0 degrees.
Furthermore, lines of longitude run from the North Pole to the South Pole and cross the equator at right angles. The International Date Line (IDL).
For example, follows the 180-degree longitude line. he correct option is: C
To know more about geographic.
https://brainly.com/question/30067270
#SPJ11
in what country would you find the volcano that erupted this week on stromboli island?
Answer: Italy
Explanation:
Hope this helps <3
Complete the missing word in the What is the definition of sustainability as given in the Brundtland Report of the United Nations in 1987? The needs of the present without compromising the ability of generations to meet their own needs." Value: 10 Sustainability is about more than just the benefits of recycling materials and resources. While the economic factors are important, sustainability also accounts for the and consequences of human activity. Value: 10 The process of recycling aluminium cans is described in the video as a 'cyclical rather than linear' process. Resulting in continuous use of materials. True False
The definition of sustainability as given in the Brundtland Report of the United Nations in 1987 is: "Sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs."
While the economic factors are important, sustainability also accounts for the environmental and social consequences of human activity., the process of recycling aluminium cans is a 'cyclical rather than linear' process, which results in the continuous use of materials.
Learn more about sustainability.
https://brainly.com/question/33752348
#SPJ11
Which mechanism causing air masses to ascend is significant in the creation of midlatitude hurricanes and cyclones?
the system becomes unstable. Ultimately, the upward movement of air leads to the creation of mid-latitude cyclones and hurricanes.As a result
Mid-latitude hurricanes and cyclones are created by a mechanism called "Baroclinic instability"
Baroclinic instability is an atmospheric instability in which horizontal temperature gradients exist. A baroclinic atmosphere is one in which the density changes as a function of temperature and pressure.
In the mid-latitudes, cyclones that form along polar fronts are usually associated with baroclinic instability.Baroclinic instability is caused by ascending air masses as a result of differences in temperature and humidity. Because of this,
it is most common in mid-latitudes, which have greater changes in temperature and humidity than the tropics. Baroclinic instability develops when warm air is forced to ascend over a layer of cooler air, resulting in the formation of clouds and precipitation.
The unstable interaction between cold and warm fronts in a mid-latitude weather system is another way that baroclinic instability may occur.
When the cold front begins to catch up to the warm front, it causes the warm air to rise abruptly. When this happens, a baroclinic zone is created, and
, it may be stated that baroclinic instability is an important mechanism in the formation of mid-latitude hurricanes and cyclones.
To know more about hurricanes visit:
https://brainly.com/question/33034641
#SPJ11
One of the main factors to consider is map distortion. All maps have distortion because it is impossible to transform the three-dimensional Earth onto a flat surface without causing errors. There are four primary types of distortion: area, shape, distance, and direction. Each of the projections found in Figure 2.1 (shown above) creates distortion on the globe. The job of the cartographer is to decide what distortion is appropriate according to the purpose of the map. 1. Of the three projections shown in Figure 2.1 (shown above), which would be best for making a map along a: a. Great circle, say the equator? Explain your response in one sentence. b. Small circle, say the tropic of cancer? Explain your response in one sentence. c. Map of a continent, say Antarctica? Explain your response in one sentence. 2. Refer to Figure 2.2. a. What are your very first observations of this map? b. Take a closer look at the map. What do you observe? Figure 2.2 is an example of a cartographic fallacy. This occurs when the map is not representative of reality-a map with a fallacy also has an intentional or accidental lie. Cartographers often use fallacies on maps of public transportation systems. In order to fit all of the station labels on the map, the cartographer misrepresents the distances between them. A danger with map projections is that the map may enlarge certain countries, which can make them seem powerful and intimidating. This concept is not new - it is known as the "power of representation and representation of power". As an example of this, observe the map below of Africa, and take note of the landmasses that have been put inside the continent of Africa (Figure 2.3). 3. Refer to Figure 2.3. Interpret the map, then write down some of the things you noticed, things you found interesting, or things that might confuse you. 4. Refer back to Figure 2.1. a. Does the size of Africa appear distorted in any of the projections? If yes, in which projections? Tip: compare Africa and Greenland in each projection. b. Does the shape of Africa appear distorted in any of the projections? If yes, in which projections? Tip: use a globe, which best represents the shape of continents, to compare the map projections in Figure 2.1.
One of the main factors to consider is map distortion.
All maps have distortion because it is impossible to transform the three-dimensional Earth onto a flat surface without causing errors.
There are four primary types of distortion: area, shape, distance, and direction.
Each of the projections found in Figure 2.1 (shown above) creates distortion on the globe.
The job of the cartographer is to decide what distortion is appropriate according to the purpose of the map.
1. Of the three projections shown in Figure 2.1 (shown above), the best projection for making a map along a:
a. Great circle, such as the equator, would be the cylindrical equal-area projection. This projection preserves the area but distorts the shape and distance.
b. Small circle, such as the Tropic of Cancer, would be the azimuthal equidistant projection. This projection preserves distance but distorts shape and area.
c. Map of a continent, such as Antarctica, would be the conic projection. This projection preserves shape and area but distorts distance.
2. Referring to Figure 2.2:
a. The very first observation of this map is that it represents the public transportation system of a city.
b. Upon closer inspection, you observe that the distances between the stations on the map may not accurately reflect the actual distances in reality. This is an example of a cartographic fallacy, where intentional or accidental lies are present on the map to fit all the station labels.
3. Referring to Figure 2.3:
The map represents Africa with landmasses placed inside the continent. This demonstrates the "power of representation and representation of power" concept, where certain countries are enlarged on the map, making them seem powerful and intimidating.
4. Referring back to Figure 2.1:
a. The size of Africa appears distorted in all of the projections compared to Greenland. However, the Mollweide projection minimizes the distortion of Africa's size.
b. The shape of Africa appears distorted in all of the projections. The Robinson projection minimizes the distortion of Africa's shape.
Remember, map projections are tools used by cartographers to represent the Earth's surface on a flat map. Each projection has its strengths and weaknesses, and the choice of projection depends on the purpose of the map and the area being represented.
Learn more about map distortion from this link:
https://brainly.com/question/13960352
#SPJ11
Isotherms can be deflected by ocean currents. Which one of the following is correct?
A) Cool ocean currents in the Northern hemisphere deflect isotherms to the right.
B) Cool ocean currents in the Southern hemisphere deflect isotherms to the left.
C) Warm ocean currents in the Northern hemisphere deflect isotherms towards the north pole.
D) Warm ocean currents in the Southern hemisphere deflect isotherms towards the equator.
Cool ocean currents in the Southern hemisphere deflect isotherms to the left. The Correct option is B
Isotherms are the lines that are used to represent areas with similar temperatures on weather maps. They can be deflected by the ocean currents.
Isotherms are lines on a map that show regions with the same temperature. They're used to show temperature gradients over a large area. They are also referred to as isothermal lines. They're also utilized in atmospheric and oceanographic research.
Isotherms are affected by ocean currents, and their direction of movement is determined by the hemisphere. The warm ocean current in the Northern hemisphere deflects isotherms towards the North Pole.
Isotherms are deflected to the left by cool ocean currents in the Southern Hemisphere.The deflection of isotherms is caused by the Coriolis effect, which is a force caused by the rotation of the Earth. The Coriolis effect causes moving objects to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. The Correct option is B
To learn more about Isotherms.
https://brainly.com/question/30579741
#SPJ11
Concept Map for Earth Formation med by Place the terms listed below in the proper box in the Concept Map above. The linking phrases are provided. Sparse on Earth Elements below Fe Elements above Fe
Supernova
Explosion
Nuclear Fusion Elements Abundant on Earth Protons, neutrons and electrons
Here's a simplified representation of the concept map you described:
Sparse on Earth:
Elements below Fe
Supernova
Explosion
Elements Abundant on Earth:
Elements above Fe
Nuclear Fusion
Protons, neutrons, and electrons
In this representation, the terms "Elements below Fe," "Supernova," and "Explosion" are linked to the category "Sparse on Earth" because they are associated with elements that are less abundant on Earth. Similarly, the terms "Elements above Fe," "Nuclear Fusion," and "Protons, neutrons, and electrons" are linked to the category "Elements Abundant on Earth" because they are associated with elements that are more abundant on Earth.
Please note that this representation is a simplified textual version of the concept map and does not include the visual layout and connections of a traditional concept map.
To know more about Nuclear here
https://brainly.com/question/15214614
#SPJ4
The density of air (choose all that apply) is greatest at high altitudes results in the highest pressure near the surface results in the highest pressure at high altitudes does not vary with altitude is greatest at low altitudes
The density of air decreases with increasing altitude, so the statement "the density of air is greatest at high altitudes" is incorrect.
As altitude increases, the pressure of the air decreases due to the decreasing weight of the atmosphere above. Therefore, the statement "the highest pressure is near the surface" is accurate, as the air at lower altitudes is compressed by the weight of the air above, resulting in higher pressure.
Conversely, the pressure decreases with increasing altitude, so the statement "the highest pressure is at high altitudes" is incorrect. The density of air does decrease with increasing altitude, and the statement "the density of air does not vary with altitude" is incorrect. Lastly, the statement "the density of air is greatest at low altitudes" is correct, as the air is denser closer to the Earth's surface due to the weight of the atmosphere above.
Learn more about density of air.
https://brainly.com/question/33764431
#SPJ11
