Answer:
1.To prepare compost, either a plastic or a concrete tank can be used. The size of the tank depends upon the availability of raw materials.
Collect the biomass and place it under the sun for about 8-12 days. Now chop it to the required size using the cutter.Prepare a cow dung slurry and sprinkle it on the heap for quick decomposition.Add a layer (2 – 3 inch) of soil or sand at the bottom of the tank.Now prepare fine bedding by adding partially decomposed cow dung, dried leaves and other biodegradable wastes collected from fields and kitchen. Distribute them evenly on the sand layer.Continue adding both the chopped bio-waste and partially decomposed cow dung layer-wise into the tank up to a depth of 0.5-1.0 ft.After adding all the bio-wastes, release the earthworm species over the mixture and cover the compost mixture with dry straw or gunny bags.Sprinkle water on a regular basis to maintain the moisture content of the compost.Cover the tank with a thatch roof to prevent the entry of ants, lizards, mouse, snakes, etc. and protect the compost from rainwater and direct sunshine.Have a frequent check to avoid the compost from overheating. Maintain proper moisture and temperature.
please mark me as brainliest
1. Explain why bacteria able to survive in almost any environment.
Explanation:
because the bacteria is evolve so quickly that they can even adapt to use crude oil like some insect
The cell walls of a plant consist mostly of cellulose, a carbohydrate, which provides a strong structure. The cell membrane gets its structure primarily from lipids, and embedded proteins allow for material transport.
Which of the following elements would be found in the LOWEST amounts in both the cell wall and cell membrane?
Answer:
The answer is Sodium (Na+)
Explanation: The cell wall of the plant cells is composed mostly of cellulose, which is a polysaccharide composed mostly of carbon, hydrogen and oxygen, and it has a linear and complex configuration. On the other hand, the cell membrane is composed of phospholipids, in the configuration of lipid bilayer. Phospholipids are molecules that have a polar head (where phosphorus is found) and a hydrophobic (lipid) tail. Carbon and hydrogen are also found in non-polar or hydrophobic tails. Sodium on the other hand is an Ion (Na +) that is mainly dissolved in water, so it is expected to find it mostly in the lumen or outside the cell. Sodium plays an important role in the transport of some substances through the cell membrane, but their amounts cannot be very high, because of being very concentrated, this can cause plasmolysis or cell destruction
Give the NUMERICAL value to the following question. If a car was traveling 25
m/s and then accelerated at a rate of 5 m/s/s for 3 s, then what was the final
velocity?
Answer:
Given,
initial velocity= 25m/s
acceleration= 5 m/s
time= 3 s
final velocity= ?
We know that,
acceleration= final velocity- initial velocity/ time
or, 5 = final velocity- 25 / 3
or, 5*3 = final velocity- 25
or, 15+ 25= final velocity
Therefore, final velocity is 40 m/s.
Medical researchers often test medicines on patients who have given informed consent for the tests. The researchers divide the patients into two groups. One group is given the medicine. The second group is given a harmless substitute such as sugar pills. Neither the patients nor the researchers know which patients have received the medicine and which have received the substitute.
What is the purpose of having neither the patients nor the researchers know who is receiving which treatment?
to increase accuracy
to increase precision
to decrease bias
to decrease patient safety
Answer:
to decrease bias
Explanation:
Answer:
It be C: to decrease bias
Explanation:
A lot a groups in Medical research has bias and sometimes others can help decrease bias!
Explain the ff.
Demographic factor affecting the business environment
Economic factor affecting the business environment
Sociocultural factor affecting the business environment
Legal and Political factor affecting the business environment
Technological factor affecting the business environment
Answer:
I don't know what the answer ais
which of the following is correct?
Answer:
Offspring are non identical
Explanation:
How do catalysts affect a chemical reaction?
lower activation energy
provide activation energy
increase activation energy
lose activation energy
Answer:
lower activation energy
brainliest is appreciated
Explanation:
Catalysts make such a breaking and rebuilding happen more efficiently. They do this by lowering the activation energy for the chemical reaction. Activation energy is the amount of energy needed to allow the chemical reaction to occur. The catalyst just changes the path to the new chemical partnership.2
Answer:
Explanation:
Catalysts help a chemical reaction to happen by lower activation energy
What is the function of protein for the body?
muscle growth
bubble gum
energy
genetic information
Answer:
Energy why i said energy because were drinking coffee mineral eh,
Which characteristics of a fossil would make it useful as an index fossil in determining the relative age of widely separated rock layers?
What is the answer???
Answer:
done done down
Explanation:
done done done done
what is air? this dont even have enough characters to post so im writing this
Mass divided by volume measures?
what happens if an organelle stops working
if an organelle stops working the cell will no longer be able to excrete proteins or other molecules.
What effect does factory smoke have on the water cycle?
Answer:Acid rain
Explanation:
What is the function of enzymes in living cells? *
Enzymes store genetic information.
Enzymes catalyze chemical reactions.
Enzymes serve as a structural unit of cell walls.
Enzymes prevent the transcription of DNA.
Enzymes are used catalists who speeds up the chemical reaction.
Therefore, correct option is :
B. Enzymes catalyze chemical reactions.
How do I create a sentence explaining how amino acids form proteins
PLEASE HELP!!!!!!!!!!!
40 POINTS!!!!!
Please write the Experimental and the Null Hypothesis for the following scenerio...
August 1, 2013
Light that Moves and Molds Gels
Pitt research team demonstrates gels that can be moved, controlled by light
PITTSBURGH—Some animals—like the octopus and cuttlefish—transform their shape based on environment, fending off attackers or threats in the wild. For decades, researchers have worked toward mimicking similar biological responses in non-living organisms, as it would have significant implications in the medical arena.
Now, researchers at the University of Pittsburgh have demonstrated such a biomimetic response using hydrogels—a material that constitutes most contact lenses and microfluidic or fluid-controlled technologies. Their study, published in Advanced Functional Materials, is the first to show that these gels can be both reconfigured and controlled by light, undergoing self-sustained motion—a uniquely biomimetic behavior.
Together with Olga Kuksenok, research associate professor in the Swanson School, Balazs experimented with a newer type of hydrogel containing spirobenzopyran molecules. Such materials had been previously shown to form distinct 2-D patterns on initially flat surfaces when introduced to varying displays of light and are hydrophilic in the dark but become hydrophobic under blue light illumination. Therefore, Balazs and Kuksenok anticipated that light could be a useful stimulus for tailoring the gel’s shape.
Using computer modeling, the Pitt team demonstrated that the gels “ran away” when exposed to the light, exhibiting direct, sustained motion. The team also factored in heat—combining the light and local variations in temperature to further control the samples’ motions. Controlling a material with light and temperature could be applicable, Balazs said, in terms of regulating the movement of a microscopic “conveyor belt” or “elevator” in a microfluidic device.
Experimental Hypothesis:
Null Hypothesis:
Answer:
PITTSBURGH—Some animals—like the octopus and cuttlefish—transform their shape based on environment, fending off attackers or threats in the wild. For decades, researchers have worked toward mimicking similar biological responses in non-living organisms, as it would have significant implications in the medical arena.
Now, researchers at the University of Pittsburgh have demonstrated such a biomimetic response using hydrogels—a material that constitutes most contact lenses and microfluidic or fluid-controlled technologies. Their study, published in Advanced Functional Materials, is the first to show that these gels can be both reconfigured and controlled by light, undergoing self-sustained motion—a uniquely biomimetic behavior.
“Imagine an apartment with a particular arrangement of rooms all in one location,” said lead author Anna Balazs, Pitt Distinguished Professor of Chemical and Petroleum Engineering in the Swanson School of Engineering. “Now, consider the possibility of being able to shine a particular configuration of lights on this structure and thereby completely changing not only the entire layout, but also the location of the apartment. This is what we’ve demonstrated with hydrogels.”
Together with Olga Kuksenok, research associate professor in the Swanson School, Balazs experimented with a newer type of hydrogel containing spirobenzopyran molecules. Such materials had been previously shown to form distinct 2-D patterns on initially flat surfaces when introduced to varying displays of light and are hydrophilic (“liking” water) in the dark but become hydrophobic (“disliking” water) under blue light illumination. Therefore, Balazs and Kuksenok anticipated that light could be a useful stimulus for tailoring the gel’s shape.
Using computer modeling, the Pitt team demonstrated that the gels “ran away” when exposed to the light, exhibiting direct, sustained motion. The team also factored in heat—combining the light and local variations in temperature to further control the samples’ motions. Controlling a material with light and temperature could be applicable, Balazs said, in terms of regulating the movement of a microscopic “conveyor belt” or “elevator” in a microfluidic device.
“This theoretical modeling points toward a new way
describes lipids in water
Answer:
Ok
Explanation:
Molecules such as proteins, nucleic acids, and carbohydrates have an affinity for water and are called hydrophilic (“water-loving”). Lipids, however, are hydrophobic (“water-fearing”). Some lipids are amphipathic—part of their structure is hydrophilic and another part, usually a larger section, is hydrophobic. Hope this helped
identifica en la imagen los elementos q se imtegran con la Vegetación el agua y la arena de algunos lugares como los que aqui se observan
A: Económicos
B:Sociales
C:culturales
D:Naturales
Answer:
prob A or C ;-;
To be considered living, an organism must ____.
A.
develop but not grow
B.
never develop
C.
develop as it grows
D.
grow but not develop
Reset
Answer:
C develop as it grows I believe
Answer:
C. Develop as it grows
Explanation:
Living things display respiration, movement, reproduction and ofcourse growth which are necessary for any living organism. All of the above characteristics develop as the organism grows. Hence the answer.
Hope it helps!
What is a membrane-bound organelle?I
Answer:
a single or double lipid bilayer membrane.
Explanation:
How would the loss of predators contribute to deforestation in the
jungle?
Answer:
Predators eat prey. When they do so, they are keeping the population or number of prey in check. Now, a lot of prey are either herbivores or omnivore, meaning plants are in their diet. If there were to be no predators, an absurd overpopulation of prey would arise. This would cripple the growth of young trees by the prey feeding on them, and overall would over-run their habitat, making the food sources scarce. When the food source gets so low they will die out or continue to move on to other surrounding areas and create the same problems.
hope this is a decent answer :)
Belle ran a total of 510 meters directly toward school at a constant velocity. She ran one-third
of that distance in 85 seconds. What was her velocity?
HELP ASAP PLZZZ BEING TIMED
Answer:
Explanation:
her velocity was 90kph
differentiate between larva of culex mosquito and that of anopheles mosquito on the basis of feeding habit
Answers in the image
Hope it helps!
Explanation:
•larva of culex mosquito is bottom feeder where is Lava of anopheles mosquito is surface feeder
• Culex mosquito respiratory siphon is long whereas a the anopheles mosquito respiratory siphon is short
•Culex mosquito form an angel inside water whereas anopheles mosquito remains of parallel with water surface
Pls help
Living things, such as plants and animals, that are made up of cells are called
A. chromosomes.
B. parameciums.
C. organisms.
D. genes.
Answer:
C. organisms.
Explanation
Complete the sentence to identify a method to estimate the weight of an animal.
A simple method to get an approximate weight for an)
is with a weigh tape.
Answer:
this question states Complete the sentence to identify a method to estimate the weight of an animal.
A simple method to get an approximate weight for an)
is with a weigh tape. you can do it.
Explanation:
SOMEONE WHOS GOOD AT SCIENCE I BEG U HELP. ILL GIVE U A LOT POINTS. Fill in/ answer as many from the pic as u can, pls don’t guess!! Number them pls
Answer:
can you snap the picture again and please make it straight when snapping, maybe I can help you
Answer:
please take another photo
Explanation:
what happens to enzyme ability to catalyzes a reaction when enzymes are heated?
Answer:
Heating an enzyme denatures the structure and reduces or turns off function!
Explanation:
Enzymes are proteins that increase the speed of a reaction. Heat denatures the structure of an enzyme, which causes it to lose function!
There are the Three 'F's in Biology... Form Follows Function, if you alter the form you also alter the function of something in Biology!
ANSWER THIS ASAP: Im losing my got-dang mind over this! Can someone PLEASE tell me in scientific natiation, when u move the decimal to the left is it positive( or when u move it to the left its negative?)? And if u move the decimal to the right is it positive(or when u move it to the right its negative?)?
Answer:
oh I can try my best to help you so it depends on the whole number you can move the decimal to the left or to the right but if the whole number is positive then it would still be positive just have less value when doing it to the left and it would have more value when moving it to the right .so think of it as moving it to the left as dividing/subtracting and moving it to the right as multiplying/adding hope I helped!! :'))
Answer:
if it is whole number then its positive
Explanation:
brainliest?
important eye equipment for lab work
Answer:
Safety glasses and safety goggles are used in the laboratory to protect the eyes. Safety goggles provide the best protection from chemicals splashing in the eyes because they protect the sides of the face. Safety glasses do not protect the sides of the face, so chemicals could still get into the eyes.
Answer:
Safety glasses and safety goggles are used in the laboratory to protect the eyes. .
Explanation:
. Safety goggles provide the best protection from chemicals splashing in the eyes because they protect the sides of the face. Safety glasses do not protect the sides of the face, so chemicals could still get into the eyes.
