When a car turns on a curved road, the centripetal force is generated. This force, which is applied to the circular path's centre, is what causes the body's velocity to change direction.
The force is provided by the friction between the tyres of the car and the road surface. This friction is a part of the normal force, which acts perpendicular to the road's surface.
The other component of the normal force, the normal reaction, acts in the opposite direction to the centripetal force and helps in balancing the weight of the car.
The normal force thus plays an important role in providing the centripetal force and keeping the car balanced. Without it, the car would not be able to turn on a curved road.
To learn more about friction visit:
https://brainly.com/question/24338873
#SPJ4
Which is the formula that describes the magnitude of an
momentum?
object's
Answer:
The magnitude of the momentum of an object is p = mv.
Explanation:
Here, m is the mass of the object and v is the velocity of the object. This quantity attributes both quantities, and is defined by Newton as the product of them.
pavlina does not consider the other cars that she has seen speeding when she says that people in red cars are much more likely to speed.
Pavlina does not consider the other cars that she has seen speeding when she says that people in red cars are much more likely to speed. This illustrate Present or Present bias.
Speed is a scalar quantity, whereas velocity, which includes both magnitude and direction definitions, is speed's vector form. Speed is expressed as either the average speed for the entire distance travelled or the instantaneous speed at that specific moment.
Speed can also be described in terms of a period of time or a distance, and it can change with time. Speed is defined as the rate at which an object's position changes.
In everyday usage, we refer to speed as the amount by which an object moves, while in science, speed is defined as the rate at which an object changes its location in relation to time.
Learn more about the Speed here: https://brainly.com/question/13943409
#SPJ4
Complete Question:
Pavlina does not consider the other cars that she has seen speeding when she says that people in red cars are much more likely to speed. What type of bias does this illustrate?
A certain household has consumed 250 units of energy during a month. How much energy is this in joule?
Answer:
The Answer is 9×10^8J
Explanation:
unit of energy is equal to 1 kilowatt hour (kWh).unit of energy is equal to 1 kilowatt hour (kWh).1 unit = 1 kWhunit of energy is equal to 1 kilowatt hour (kWh).1 unit = 1 kWh1kWh=3.6×106Junit of energy is equal to 1 kilowatt hour (kWh).1 unit = 1 kWh1kWh=3.6×106JTherefore, 250 units of energy =250×3.6×106=9×10^8J.Which one does NOT force air parcels to rise? orographic processes advection frontal movement convection
Orographic processes are the ones which does not force the air parcels to rise up.
Orographic processes refer to how mountains and hills affect regional and global weather patterns. Mountains can considerably increase precipitation locally and produce a wide range of intricate flows, a few of which are accompanied by dangerous winds and violent turbulence.
Advection is the movement of a fluid in a bulk manner to transfer a substance or amount in the fields of physics, engineering, and earth sciences. It carries the characteristics of that substance with it. The bulk of the advected substance is often a fluid as well.
To learn more about advection here
brainly.com/question/13433249
#SPJ4
Determine the magnitude of the Coulomb force on the tape using the value of tan θ and your equation from the previous exercise for FCoulomb.FCoulomb = .40 x 10^-3 N
The magnitude of the Scotch tape is 13 0.05 cm, and the linear mass density (d) is 1.44 0.01 g/m.
Given that the length of the Scotch tape is 13 0.05 cm and the linear mass density (d) is 1.44 0.01 g/m, the answers to the following questions calculate the coulomb force, the number of atoms, and the elementary charges.
where r is the distance between the charges, Q1 and Q2 are the magnitudes of the charges on the two pieces of tape, and k is Coulomb's constant. Given that F Coulomb is equal to 0.40 x 10-3 N, we can use the following equation to find the charge, Q: where is the static friction coefficient, which was determined in the preceding exercise.
Learn more about density here-
https://brainly.com/question/952755
#SPJ4
explain the arrangements of molecular magnets in a magnet and in a magnetic substance
: Molecular magnet can refer to : molecular based magnet . An unconventional magnetic material that consists of organic molecules cordination compounds and combination
a light bulb requires a current of 0.70 a to emit a normal amount of light. if the light is left on for 1.0 h, what is the number of electrons that pass through the bulb?
The number of electrons that pass through the bulb is 0.4375 x 10^19C when a light bulb requires a current of 0.70 a to emit a normal amount of light.
Given the current required for a light bulb (I) = 0.7A
Time for which light is left on (t) = 1h = 3600s
Let the number of electrons that pass through the bulb = n
We know that I = Q/t where Q is the charge flowing through the bulb.
Current is expressed as charge per unit time.
So, Q = I x t = 0.7 x 3600s = 2520C
We know that the charge on an electron (qe) = 1.6X10^-19C
Then, n = I/ 1electron charge = 0.70 / 1.6X10^-19
n = 0.4375 x 10^19C
Hence, the number of electrons that pass through the bulb is 0.4375 x 10^19C.
To learn more about charge click here https://brainly.com/question/11944606
#SPJ4
the net electric flux crossing an open surface is never zero. true or false?
The given statement that net electric flux crossing an open surface is never zero, is false.
The net electric flux of an electric field through a closed surface is equal to the enclosed charge, divided by the permittivity of the free space. Where charge is taken in the unit of coulombs.
The net electric flux cross an open surface can also be zero if the is perpendicular to the direction of the field. In other word if the field lines are parallel to the surface. Electric flux is a scaler quantity. The SI unit of electric flux is N-m²/C.
To know more about electric flux, here
https://brainly.com/question/14544020
#SPJ4
given that the order of the reaction is a zero order how would i then find k and m in the rate equation r=k*[cv]^m
k= t [R] o [R]. is the reaction's rate constant. The rate constant of a zero-order reaction is written as concentration/time, or M/s, where M is the molarity and s is one second.
The rate constant is measured in units of k = mol L-1 s-1. (1) K I = y I x I where Ki, yi, and xi are respectively the K-value of component I vapor phase mole fraction of component I and liquid phase mole fraction of component i. K-value is defined as the equilibrium ratio of vapor to the liquid mole fraction of a component in a combination.
Take a look at a zero order reaction.
R P Rate
dt d [R] =k [R] o
dt d [R] =k [R] o
dt \s−d
[R] \s \s =k \sd
[R]=−k⋅dt
on both sides, integrating
[R]=kt+I (1)
k= t [R] o [R]
Learn more about conducting here-
https://brainly.com/question/30067151
#SPJ4
a car is traveling at a speed of 34 m/s. (a) what is its speed in kilometers per hour? km/h
The car is traveling at a speed of 34 m/s. Its speed in kilometres per hour is calculated to be 122.4 km/h.
Speed is the rate at which an object's position shifts in any direction.
By dividing the distance by the time, one may calculate speed. Calculating the units for speed requires knowledge of the units for both time and distance. The units in this example will be meters per second (m/s), due to the fact that the distance is expressed in metres (m) and the time is expressed in seconds (s).
1 h = 3600 s
1 km = 1000 m
s₂ = (34 m/s) × (60×60)/1000
⇒ 122.4 km/h
s₂ = 122.4 km/h
To know more about speed:
https://brainly.com/question/28493792
#SPJ4
2.if 20 pounds of ice starts at fifteen degrees and is changed to steam at 425 degrees in one hour how many btuh are required?
If 20 pounds of ice starts at fifteen degrees and is changed to steam at 425 degrees in one hour. The total amount of energy required is 21000 BTUs/hr.
To calculate the amount of energy required to change 20 pounds of ice at 15 degrees to steam at 425 degrees in 1 hour, you need to determine the heat of fusion and the heat of vaporization.
Heat of fusion: 80 BTUs/lb
Heat of vaporization: 970 BTUs/lb
So, the total amount of energy required is: 20 x (80 + 970) = 20 x 1050 = 21000 BTUs/hr.
Energy change refers to the difference in the amount of energy contained in a system before and after a process has taken place. It can refer to an increase in energy (endothermic) or a decrease in energy (exothermic). For example, the energy change during a chemical reaction or a physical process such as melting or boiling can be calculated by determining the heat absorbed or released during the process.
Learn more about Energy change:
brainly.com/question/21809360
#SPJ4
why do your hands not get warm when rubbing them with soapy water?
Answer:
Explanation:
because you are rubbing the soap not your hands so the soap takes up the energy rahter than the hands
a lightning bolt strikes a tree, moving 23.36 c of charge through a potential difference of 142 mv. what energy was dissipated? 1mv
Without knowing t, we cannot calculate the current, and thus the energy dissipated.
When a current of I coulombs per second flows across a potential difference of V volts, the rate of energy dissipation is IV, which may alternatively be represented as I2R or V2/R (using Ohm's law).
The energy dissipated by a lightning bolt can be calculated using the equation P = IV,
where P is the power (energy per unit time),
I is the current, and
V is the potential difference.
Given that the lightning bolt moved 23.36 coulombs of charge through a potential difference of 142 millivolts,
we can calculate the current as follows:
I = Q / t
where t is the time it takes for the charge to flow, which is not specified.
For more questions on Energy Dissipated
https://brainly.com/question/13108225
#SPJ4
which type of 3d imaging technique visualizes a structure as if it were hollow and the viewer were inside of it.
Volumetric visualization type of 3d imaging techniques visualizes a structure as if it were hollow and the viewer was inside of it.
This type of 3D imaging technique is called volumetric visualization or volume rendering. It is a process of creating 3D images from data sets that represent the volume or density of a physical object.
The technique creates images by taking into account the volume of the object and simulating the light transmission through it, allowing the viewer to see the structure as if it were hollow and the viewer was inside it.
This is useful in many fields, such as medical imaging, where it allows physicians to visualize the internal structures of a patient's body in a non-invasive way.
To learn more about 3d imaging
https://brainly.com/question/29791403
#SPJ4
determine the proper units for momentum using dimensional analysis. (b) the unit of force is the newton n, where 1 n 5 1 kg ? m/s2 . what are the units of momentum p in terms of a newton and another fundamental si unit?
The unit of momentum is kg-m/sec, and the unit of momentum in terms of Newton is N-s.
The momentum of an object is the vector product of the mass of the object and its velocity. It is denoted by P. It is a vector quantity.
P = mv
So its unit will be (kg) × (m/s) = kg-m/s
We also know that the time rate of change of momentum is called force,
F = ΔP/Δt
ΔP = FΔt = Force × change in time
So the SI unit of momentum in terms of Newton will be, N × Sec = N-s
To know more about momentum, here
https://brainly.com/question/24030570
#SPJ4
How high would you have to lift a 1000 kg car to give it a potential energy of: a. 2,000 J (b) 200,000 J
Given:
a. 2,000J
b. 200,000 J
Answer:
a. 0.204 m, b. 20.408 m
Explanation:
We know that Potential energy is given by
[tex]U = mgh[/tex]
Rearranging this, we have:
[tex]h=U/mg[/tex]
a. 2000 J = 2000 kgm/s²
h = 2000/(1000*10) (Taking g = 10 m/s²)
= 0.2 m
If we took g as 9.8 m/s²,
h = 0.204 m (Marginal error)
b. 200,000 J = 200,000 kgm/s²
h = 200,000/(1000*10) (Taking g = 10 m/s²)
= 20 m
If we took g as 9.8 m/s²,
h = 20.408 m
A baseball is thrown up in the air from an initial height of 6 feet. Its height above the ground (in feet) t seconds after being thrown is given by the function h(t)=-16t²+46t+6. How long will it take (in seconds) for the baseball to hit the ground? a) 4 seconds b) 5/2 seconds
c) 2 seconds
d) 3 seconds
From a starting height of six feet, a baseball is hurled upward. Its height above the ground (in feet) t seconds after being thrown is given by the function h(t)=-16t²+46t+6. It take 2 seconds for the baseball to hit the ground. Hence, the correct option is (c).
The baseball hits the ground when the height is 0. Thus, solving h(t)=-16t^2 + 46t + 6 = 0:
-16t^2 + 46t + 6 = 0
Using the quadratic formula:
t = (-b ± √(b^2 - 4ac)) / 2a
Where a = -16, b = 46, c = 6
t = (-46 ± √(46^2 - 4 x -16 x 6)) / 2 * -16
t = (-46 ± √(46^2 + 384)) / -32
t = (-46 ± 2√190) / -32
t = (46 ± 2√190) / 32
t ≈ 2 seconds
So, the baseball will hit the ground approximately 2 seconds after it was thrown.
To know more about height please refer: https://brainly.com/question/16541000
#SPJ4
accurately identify all areas where red bull energy drinks are currently sold
In this instance, Red Bull Australia imports and then sells to Cadbury Schweppes, which in turn distributes to retailers throughout its network. Red Bull may significantly lower distribution expenses and expand its sales in a new area.
Global sales of the well-known energy drink Red Bull increased to 9.8 billion cans in 2021 from just over four billion in 2011. With a market share of 42.5 percent, Red Bull ranks among the most well-liked energy beverages in the country. Red Bull North America has 14 offices spread around the US, including its headquarters in Santa Monica, California. At an average of 28.4 liters per person in 2022, the United States had the greatest per capita volume consumption of energy drinks in the world. With roughly 12, 10,5, and 8.8 liters each, the United Kingdom, Japan, and Spain came in second through fourth.
Learn more about network from here:
https://brainly.com/question/15025417
#SPJ4
classify these signals into energy-type signals, power-type signals, and signals that are neither energy-type nor power-type signals. for energy-type and power-type signals, find the energy or the power content of the signal.
To classify the signals into energy-type, power-type and signals that are neither energy-type nor power-type signals, we need to look at the nature of the signal and its characteristics.
Energy-type signals can be expressed as the integral of the square of the signal, while power-type signals can be expressed as the integral of the absolute value of the signal. An example of a signal that is neither energy-type nor power-type is a step function.
For energy-type signals, the energy content is calculated by integrating the square of the signal over the duration of the signal. For power-type signals, the power content is calculated by integrating the absolute value of the signal over the duration of the signal.
For example, if the signal is x(t) = e-t cos(t), the energy content is calculated by integrating the square of the signal over the duration of the signal, i.e. ∫x2(t)dt. Similarly, for a power-type signal, the power content is calculated by integrating the absolute value of the signal over the duration of the signal, i.e. ∫|x(t)|dt.
Learn more about energy-type signals:
https://brainly.com/question/20023978
#SPJ4
true or false: the remanent magnetization of a material is its level of permanent, internal magnetization in no applied magnetic field.
The given statement is that Remnant magnetization of a material is its level of permanent, internal magnetization in the absence of an applied magnetic field, is true.
The remnant magnetization (or remnant magnetization) of a material is its level of permanent internal magnetization in the absence of an applied magnetic field. It is the magnetization that remains in a magnetic material after the removal of an external magnetic field. Remnant magnetization is an important property in magnetic recording, electromechanical systems, and many other applications.
A magnetic field is a field produced by moving electric charges or by a permanent magnet that generates a force on other magnets or moving charges within the field.
To know more about Remnant magnetization, here
https://brainly.com/question/15334861
#SPJ4
A sample of argon gas occupies a volume of 950 mL at 25°C. What volume will the gas occupy at 50°C if the pressure remains constant?
The required volume of the gas when pressure remains constant is calculated to be 1029.65 ml.
Charles law gives the relation between temperature and volume when the pressure of the gas is kept constant.
Mathematically, it is given as,
V₁/T₁ = V₂/T₂
It is given that the sample of argon gas occupies 950 mL at 25°C.
So, V₁ = 950 ml
T₁ = 25°C = 25 + 273.15 = 298.15 K
The volume of the gas occupied at 50°C is to be found out.
V₂ = ?
T₂ = 50°C = 50 + 273.15 = 323.15 K
Placing all the values in the above equation, we have,
V₁/T₁ = V₂/T₂
950/298.15 = V₂/ 323.15
V₂ = 950/298.15 × 323.15 = 1029.65 ml
Thus, the required volume is calculated to be 1029.65 ml.
To know more about volume:
https://brainly.com/question/17181340
#SPJ4
218 cm3 solid has a mass of 0.0169 kg . when calculating its density what is the appropriate number of significant figures?
The density of the solid is: 0.77 g/cm3
What is density?It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
The formula and the procedure we will use is:
d = m/v
Where:
v= volumed= densitym= massInformation about the problem:
m = 0.0169 kgv = 218 cm3d = ?By converting the mass from (kg) to (g) we have:
m = 0.0169 kg * 1000 g/ 1 kg
m= 16.9 g
Applying the density formula we get:
d = m /v
d = 16.9 g/218 cm3
d = 0.77 g/cm3
Learn more about density in: brainly.com/question/1354972
#SPJ4
a solution is made by diluting 37 ml of a 10.25 mol/l standard solution to a volume of 2.40 l. what is the concentration of the resulting solution?
After dilution the concentration of the resulting solution will become 0.1621875 mol/l.
To find the concentration of the resulting solution, we need to calculate the number of moles of solute in the final solution and then divide by the total volume of the solution.
First, we find the number of moles of solute in the original 37 ml solution:
moles = concentration x volume
moles = 10.25 mol/l x (37 ml / 1000 ml/l)
moles = 0.39225
Next, we use the volume of the final solution to find the new concentration:
concentration = moles / volume
concentration = 0.39225 / (2.40 l)
concentration = 0.1621875 mol/l
The concentration of the resulting solution is 0.1621875 mol/l.
To know more about concentration please refer:
https://brainly.com/question/24578137
#SPJ4
For an infinitely large plane wall with thickness L, assuming 1D heat transfer, what can you say about the rate of heat conduction?
A. It is a constant everywhere.
B. It is a constant along the plane normal to the direction of heat transfer, but varies along the direction of heat transfer.
C. It varies in time.
D. None of the above.
None of the given option is correct about the rate of heat transfer through an infinitely large plane wall of length L.
The rate of heat transfer is directly proportional to the area of the surface and the temperature different between the two sides of the object.
Q/t = -KAdT/dx
Here K is the constant depends upon the type of material, A is the area of surface, and dT/dx is the temperature gradient. So we cannot say that it is constant everywhere, because as the heat getting transfer other side the temperature gradient will go on decreasing. In addition to this it is not constant along the plane. Also it does not varies with time. So option D is correct.
To know more about heat transfer, here
https://brainly.com/question/13433948
#SPJ4
Three identical charges +q and a fourth charge -q forma square of side a. (a) Find the magnitude of theelectric force on a charge +Q placed at the center ofthe square. (b) Describe the direction of this force.
Using Coulomb's law, which states that the force among two charged particles is related to the sum of the magnitudes of the charges and inversely proportional to the square of the distance between them.
(a) Coulomb's law can be used to calculate the strength of the electric force acting on a charge +Q positioned in the middle of the square: [tex]F = k \times Q \times \frac{q}{r2},[/tex]
Where k is the Coulomb's constant [tex](8.99 \times 109 N \times\frac{m2}{C2})[/tex],
Q is the size of the charge +Q, q is the size of the identical charges +q, and r is the distance between +Q and each of the charges (which is equal to the side length of the square, a).
Given that there are four charges +q that are equal, the total force can be calculated by adding the forces from each charge +q:
[tex]F = 4 \times k \times Q \times \frac{q}{a^2}[/tex]
(b) The force is moving in the direction of the square's centre.
To know more about the Coulomb's, click here: brainly.com/question/15167088
#SPJ4
if an astronaut throws a ball in space with the initial velocity of 3.0 meters per second to the west, what will the ball's velocity be in a year?
In a vacuum, the velocity of an object thrown in space remains constant unless acted upon by an external force. Thus, the ball's velocity will still be 3.0 meters per second to the west after a year.
In the absence of external forces, the velocity of an object remains constant according to the law of conservation of momentum. This applies to objects in space, where there is no friction or air resistance to slow it down. Therefore, if an astronaut throws a ball with an initial velocity of 3.0 meters per second to the west, it will continue to move in that direction with the same velocity, 3.0 meters per second, one year later. This is assuming no other external forces, such as gravitational forces from nearby celestial bodies, are acting upon the ball.
You can learn more about law of conservation of momentum at
https://brainly.com/question/1113396
#SPJ4
when the motorcyclist is at a , he increases his speed along the vertical circular path at the rate of v˙=(0.04s)ft/s2 where s is in ft . take rho = 300 ft . determine the magnitude of his velocity when he reaches B. Also, what is his initial acceleration?
The magnitude of his velocity when he reaches at B is 15 ft/s, and his initial acceleration of the motorbike is 0.00013333 ft/s^2.
Given that :-
The radius of the circular path is r = 300 ft,
and the rate of increase of speed is v˙ = 0.04s ft/s^2.
The initial acceleration a_0 of the motorcyclist can be determined by using the formula:-
=> a = v˙ / r,
Hence,
=> a_0
= v˙ / r
= 0.04 s ft/s^2 / 300 ft
= 0.00013333 ft/s^2
At point B, the magnitude of velocity v can be determined by using the formula:-
v = sqrt(v_0^2 + 2 x a_0 x r),
here v_0 is initial velocity.
Since the initial velocity is not given,
let's assume,
v_0 = 0.
Hence,
=> v = sqrt(v_0^2 + 2 x a_0 x r)
= sqrt(0^2 + 2 x 0.00013333 x 300)
= 15 ft/s
Therefore, the magnitude of the velocity at point B is 15 ft/s, and the initial acceleration of the motorcyclist is 0.00013333 ft/s^2.
To know more about acceleration please refer: https://brainly.com/question/12550364
#SPJ4
true or false? you exert a push p on an object and it pushes back on you with a force f. if the object is moving at constant velocity, then f is equal to p, but if the object is being accelerated, then p must be greater than f.
It is true that if you exert a push p on an object and it pushes back on you with a force f. if the object is moving at constant velocity, then f is equal to p, but if the object is being accelerated, then p must be greater than f.
Force is a physical quantity that describes the interaction between two objects. It is a vector quantity, meaning it has both magnitude and direction. Force is responsible for changes in an object's motion, such as acceleration, deceleration, and changes in direction. The force exerted on an object is equal to its mass times its acceleration. There are many types of forces, including gravitational forces, electromagnetic forces, and nuclear forces, among others. In physics, force is described by Newton's laws of motion, which state that the acceleration of an object is proportional to the net force acting on it, and that the net force on an object is equal to the sum of all the forces acting on it.
Learn more about Force:
brainly.com/question/26115859
#SPJ4
Gasoline is piped underground from refineries to major users. The flow rate is 3.00×10–2 m 3 /s (about 500 gal/ min), the viscosity of gasoline is 1.00×10–3 (N/m2 ) ⋅ s , and its density is 680 kg/m3 . (a) What minimum diameter must the pipe have if the Reynolds number is to be less than 2000? (b) What pressure difference must be maintained along each kilometer of the pipe to maintain this flow rate?
The minimum diameter must the pipe have if the Reynolds number is to be less than 2000 is 13m and the pressure difference is 4.3×[tex]10^{-5}[/tex]Pa.
The volume flow rate equation can be used to get the equation for flow velocity as
The phrase "volume flow rate" in physics refers to the amount of matter that travels through space in terms of physical dimensions rather than mass per unit of time. For instance, when you turn on the kitchen faucet, a certain volume of water (measured in fluid ounces, litres, or another unit) flows out of the orifice in a certain amount of time (usually seconds or minutes). The volume flow rate is referred to as this amount.
Solids do not "flow," even if they may also move through space at a regular rate. Liquids and gases almost always have what is referred to as a "volume flow rate."
V=Av
v=[tex]\frac{V}{A}[/tex]
v=[tex]\frac{V}{\pi r^{2} }[/tex]
The diameter may now be calculated using the Reynolds number equation as
[tex]N_{R}=\frac{2\rho vr}{n}[/tex]≤2000
[tex]N_{R}=\frac{2\times680\times \frac{V}{\pi r^{2} }}{n}[/tex]≤2000
[tex]N_{R}=\frac{2\times680\times \frac{3\times 10^{-2} }{\pi r }}{1\times10^{-3} }[/tex]
r≥6.5
[tex]\frac{d}{2}[/tex]≥6.5
d≥13m
To find the pressure difference use the relationship given below
[tex]V=\frac{\triangle P \pi r^{2} }{8nL}[/tex]
[tex]3\times10^{-2} =\frac{\triangle P \times 3.14\times 6.5^{2} }{8\times 1\times 10^{-3}\times 1000 }[/tex]
Now, after solving we get
[tex]\triangle P[/tex]=4.3×[tex]10^{-5}[/tex]Pa
Learn more about Reynold number
brainly.com/question/13258481
#SPJ4
Instead of following the EOQ prescription of 150 pieces/order, a company orders 100 pieces at a time. This action would typically result in: Higher total ordering cost and higher total holding cost Higher total ordering cost, but lower total holding cost Lower total ordering cost, but higher total holding cost Lower total ordering cost and lower total holding cost
In accordance with Economic Order Quantity (EOQ), this action would typicaly result in higher total order cost but lower total holding cost.
Many businesses place orders for products based on what they actually need at the time, rather than using a reorder quantity calculation. Instead, businesses should use the Economic Order Quantity method to simplify the way they place orders and pay for goods (EOQ). The EOQ formula assists online retailers in determining the optimal order quantity to save on logistics and warehousing costs. Calculating EOQ allows one to more effectively decide how much product to order in a given time frame. The EOQ formula is made up of three components: holding costs, demand, and order costs. The economic order quantity is the optimal number of units to purchase in order to meet demand while minimizing inventory expenses such as holding costs, shortage costs, and order costs (EOQ).
To know more about Economic Order Quantity (EOQ) method, click here: https://brainly.com/question/16024963
#SPJ4
