Express the number as a ratio of integers. 4.865=4.865865865…

Answers

Answer 1

To express the repeating decimal 4.865865865... as a ratio of integers, we can follow these steps:

Let's denote the repeating block as x:

x = 0.865865865...

To eliminate the repeating part, we multiply both sides of the equation by 1000 (since there are three digits in the repeating block):

1000x = 865.865865...

Now, we subtract the original equation from the multiplied equation to eliminate the repeating part:

1000x - x = 865.865865... - 0.865865865...

Simplifying the equation:

999x = 865

Dividing both sides by 999:

x = 865/999

Therefore, the decimal 4.865865865... can be expressed as the ratio of integers 865/999.

To know more about equation visit-

brainly.com/question/23146956

#SPJ11


Related Questions

Q1: Suppose X and Y are independent random variables such that E(X) = 3, Var(X) = 10, E(Y) = 6 and Var(Y) = 20. Find E(U) and Var(U) where U = 2X - Y + 1.

Answers

E(U) = 1 , Var(U) = 88.

The independent random variables are X and Y where E(X) = 3, Var(X) = 10, E(Y) = 6, and Var(Y) = 20.

We need to find E(U) and Var(U) where U = 2X - Y + 1.

Find the value of E(U):

Using the formula,E(U) = E(2X - Y + 1) ...equation (1)

Let's calculate each component separately:

E(2X) = 2E(X) {since E(aX) = aE(X)}∴ E(2X) = 2 x 3 = 6E(-Y) = -E(Y) {since E(-X) = -E(X)}∴ E(-Y) = -6E(1) = 1 {since E(constant) = constant}

Putting values in equation (1), we get: E(U) = E(2X - Y + 1)E(U) = E(2X) - E(Y) + E(1)E(U) = 6 - 6 + 1∴ E(U) = 1

Therefore, E(U) = 1.

Var(U) = Var(2X - Y + 1) ...equation (2)

Using the formula,Var(aX + bY) = a²Var(X) + b²Var(Y) + 2abCov(X,Y) {where Cov(X,Y) = ρxy x σx x σy}E(aX + bY) = aE(X) + bE(Y)

Putting values in equation (2), we get:

Var(U) = Var(2X - Y + 1)Var(U) = Var(2X) + Var(-Y) + Var(1) + 2Cov(2X, -Y) + 2Cov(-Y, 1) + 2Cov(2X, 1){Since covariance of independent random variables is zero}

Var(U) = 4Var(X) + Var(Y) + 2Cov(2X, -Y) + 2Cov(-Y, 1) + 4Cov(X,1)Var(U) = 4 x 10 + 20 + 2Cov(2X, -Y) - 2Cov(Y, 1) + 4Cov(X,1){Since covariance of independent random variables is zero}

Var(U) = 60 + 2Cov(2X, -Y) - 4Cov(Y, 1)

Note that, for independent random variables, Cov(X, Y) = 0

Hence,Var(U) = 60 + 2Cov(2X, -Y) - 4Cov(Y, 1){Now, let's calculate Cov(2X, -Y)}

Using the formula,Var(aX + bY) = a²Var(X) + b²Var(Y) + 2abCov(X,Y)Var(2X - Y) = 4Var(X) + Var(Y) - 4Cov(X,Y)

Let's solve for Cov(X,Y)4Var(X) + Var(Y) - 4Cov(X,Y) = Var(2X - Y)4 x 10 + 20 - 4Cov(X,Y) = 4 x 10 - 20Cov(X,Y) = 15

We have the values of Var(X), Var(Y), and Cov(X, Y) in the equation (2).

Let's substitute the values in equation (2).

Var(U) = 60 + 2 x 15 - 4Cov(Y, 1)Var(U) = 90 - 4Cov(Y, 1)

But, we need to calculate the value of Cov(Y,1) {since it is not zero for independent random variables}

Using the formula,Var(aX + bY) = a²Var(X) + b²Var(Y) + 2abCov(X,Y)Cov(X,Y) = [Var(aX + bY) - a²Var(X) - b²Var(Y)]/ 2ab

We need to find Cov(Y, 1)Let a = 1 and b = 1

Using the formula,Cov(Y, 1) = [Var(Y + 1) - Var(Y) - Var(1)]/ 2Cov(Y, 1) = [Var(Y) + Var(1) + 2Cov(Y,1) - Var(Y) - 0]/ 2Cov(Y, 1) = 1 + Cov(Y, 1)Cov(Y, 1) = 1/2

Now, putting the value of Cov(Y, 1) in the expression for Var(U), we get:Var(U) = 90 - 4Cov(Y, 1)Var(U) = 90 - 4(1/2)Var(U) = 88

Therefore, Var(U) = 88.

To know more about covariance visit:

https://brainly.in/question/13828312

#SPJ11

5 Students in a high school graduating class have weights that average 151 pounds with standard deviation 28 pounds. The distribution of weights is right-skewed. It's a fact that 1 pound = 16 ounces.

Answers

The average weight of the 5 students in the graduating class is 151 pounds, with a standard deviation of 28 pounds.

To calculate the average weight, we sum up the weights of all the students and divide by the total number of students. Given that the average weight is 151 pounds, we have:

Total weight of all students = Average weight * Number of students

Total weight of all students = 151 pounds * 5 students = 755 pounds

To calculate the standard deviation, we need to measure the dispersion of the weights around the average. Since the distribution is right-skewed, we can assume a normal distribution and use the empirical rule. The empirical rule states that for a normal distribution, approximately 68% of the data falls within one standard deviation of the mean.

Using the empirical rule, we can estimate that approximately 68% of the weights fall within the range of (151 - 28) to (151 + 28) pounds, which is 123 to 179 pounds.

The average weight of the graduating class is 151 pounds, with a standard deviation of 28 pounds. This information provides a general understanding of the weight distribution within the class. However, it's important to note that the distribution is right-skewed, indicating that there may be some students with weights significantly higher than the average.

To know more about standard deviation follow the link:

https://brainly.com/question/24298037

#SPJ11

types of tigers in Tadoba in Maharashtra

Answers

The Bengal tiger is the dominant subspecies in the region and is the main type of tiger you will encounter in Tadoba National Park.

In Tadoba National Park located in Maharashtra, India, you can find the Bengal tiger (Panthera tigris tigris). The Bengal tiger is the most common and iconic subspecies of tiger found in India and is known for its distinctive orange coat with black stripes.

Tadoba Andhari Tiger Reserve, which encompasses Tadoba National Park, is known for its thriving population of Bengal tigers. The reserve is home to several individual tigers, each with its own unique characteristics and territorial range.

While the Bengal tiger is the primary subspecies found in Tadoba, it is worth noting that tiger populations can exhibit slight variations in appearance and behavior based on their specific habitat and geographical location. However, the Bengal tiger is the dominant subspecies in the region and is the main type of tiger you will encounter in Tadoba National Park.

For more questions on dominant

https://brainly.com/question/20436333

#SPJ8

suppose that a function f (x) is approximated near a = 0 by the 3rd degree taylor polynomial t3(x) = 4 −3x x2 5 4x3. give the values of f (0), f ′(0), f ′′(0), and f ′′′(0)

Answers

The values of f(0), f′(0), f′′(0), and f′′′(0) are 4, -3, 0.4, and -24 respectively.

Given information:

The function f (x) is approximated near a = 0 by the 3rd degree taylor polynomial t3(x) = 4 −3x + (x^2 / 5) − (4x^3).We are to find the values of f (0), f ′(0), f ′′(0), and f ′′′(0).

Calculations: We are given the 3rd degree Taylor polynomial as:t3(x) = 4 −3x + (x^2 / 5) − (4x^3)

To find f(x) and its derivatives, we will differentiate the polynomial to different orders.

Differentiating t3(x) w.r.t x we get: $$t_3^{(1)}(x) = -3 + \frac{2x}{5} - 12x^2$$

Differentiating t3(x) again w.r.t x, we get: $$t_3^{(2)}(x) = \frac{2}{5} - 24x$$Differentiating t3(x) once again w.r.t x, we get: $$t_3^{(3)}(x) = -24$$Now, we have found f(x) and its derivatives using the Taylor polynomial. So, we can find their respective values at x = 0.

Substituting x = 0 in t3(x), we get:$$t_3(0) = 4$$Therefore, f(0) = 4.Substituting x = 0 in t3′(x), we get:$$t_3′(0) = -3$$Therefore, f′(0) = -3.Substituting x = 0 in t3′′(x), we get:$$t_3′′(0) = \frac{2}{5}$$Therefore, f′′(0) = 0.4.Substituting x = 0 in t3′′′(x), we get:$$t_3′′′(0) = -24$$

Therefore, f′′′(0) = -24.

Answer:

Therefore, the values of f(0), f′(0), f′′(0), and f′′′(0) are 4, -3, 0.4, and -24 respectively.

To know more about functions visit:

https://brainly.com/question/11624077

#SPJ11

Your mean ± 1.96 * standard error = ?
68% confidence interval
95% confidence interval
99% confidence interval
How to detect an outlier
Your mean ± 2.58 * standard error = ?
68% confidence in

Answers

Based on the Z-score table, the critical value given as 1.96 is the 95% confidence interval and 2.58 is 99% confidence interval.

The confidence interval gives the range within which a certain experiment or value would fall based on a certain level of confidence.

The 95% confidence is 1.96, 98% confidence is 2.58 and so on.

Therefore, 1.96 is the 95% confidence interval and 2.58 is 99% confidence interval.

Learn more on confidence interval :https://brainly.com/question/25638875

#SPJ1

The mean of a binomial distribution is equal to:
a. e.g. np
b. none of these
c. npq
d. square root of npq 
e. square of npq

Answers

The correct option is a. np. The mean of a binomial distribution represents the average number of successes expected in a given number of trials.

It is calculated by multiplying the number of trials (n) by the probability of success (p) in each trial. The product np accounts for the expected number of successes based on the probability of success in each trial. This formula assumes that the trials are independent and identically distributed.

By multiplying the number of trials by the probability of success, we obtain an estimate of the expected average number of successful outcomes in the binomial distribution.

Therefore, The correct option is a. np.

To know more about binomial visit-

brainly.com/question/31798837

#SPJ11

What are the solutions to the system of equations? y=x^2−5x−6 B,y=2x−6

Answers

The answer is (x, y) = (0, -6) and (7, 8).

To find the solutions to the system of equations, we can set the two equations equal to each other and solve for x.

Setting y equal to y in both equations:
x^2 - 5x - 6 = 2x - 6

Now, let's simplify the equation:
x^2 - 5x - 6 - 2x + 6 = 0
x^2 - 7x = 0

Factoring out an x:
x(x - 7) = 0

Setting each factor equal to zero:
x = 0
x - 7 = 0

Solving for x:
x = 0
x = 7

Now that we have the values of x, we can substitute them back into either equation to find the corresponding values of y.

For x = 0:
y = 2(0) - 6
y = -6

For x = 7:
y = 2(7) - 6
y = 8

Therefore, the solutions to the system of equations are (x, y) = (0, -6) and (7, 8).

the solutions to the system of equations are (x, y) = (0, -6) and (7, 8).

To find the solutions to the system of equations:

Equation 1: y = x^2 - 5x - 6

Equation 2: y = 2x - 6

We can set the right-hand sides of the equations equal to each other since they both represent y:

x^2 - 5x - 6 = 2x - 6

Now, let's solve this quadratic equation:

x^2 - 5x - 2x - 6 + 6 = 0

x^2 - 7x = 0

Factoring out an x:

x(x - 7) = 0

Setting each factor equal to zero:

x = 0    or    x - 7 = 0

Solving for x:

x = 0    or    x = 7

Now that we have the x-values, we can substitute them back into either equation to find the corresponding y-values.

For x = 0:

y = (0)^2 - 5(0) - 6

y = 0 - 0 - 6

y = -6

For x = 7:

y = (7)^2 - 5(7) - 6

y = 49 - 35 - 6

y = 8

To know more about equation visit:

brainly.com/question/10724260

#SPJ11

Please help i will mark as brainlist

Answers

The appropriate domain of the function for the height of the rocket, h(t) = -16·t² + 40·t + 96, is the time of flight of the rocket, which is; 0 ≤ t ≤ 4

What is the domain of a function?

The domain of a function or graph is the set of the possible input values or the (horizontal) extents of the function or the graph.

The specified function is; h(t) = -16·t² + 40·t + 96

The above function is a quadratic function that is continuous for all values of t such that h(t) exists for all t.

However, the function represents the height of the function, therefore, the appropriate domain of the function is the duration the rocket is in the air, which can be found as follows;

h(t) = -16·t² + 40·t + 96 = 0

2·t² - 5·t - 12 = 0

(2·t + 3)·(t - 4) = 0

t = -3/2, and t = 4

The variable t, which is time is a natural quantity, and therefore, takes positive values or 0. The possible domain of the function is therefore;

0 ≤ t ≤ 4

Learn more on the domain of a function here: https://brainly.com/question/29627739

#SPJ1

if c and d are positive integers and m is the greatest common factor of c and d, then m must be the greatest common factor of c and which of the following integers?

Answers

The answer to the question "if c and d are positive integers and m is the greatest common factor of c and d, then m must be the greatest common factor of c and which of the following integers?" is that m must be the greatest common factor of c and both d.

If c and d are positive integers and m is the greatest common factor of c and d, then m must be the greatest common factor of c and both d.

It's a theorem that m is the greatest common factor of c and d for positive integers c and d if and only if for every integer a, b that are divisible by both c and d, m also divides a and b.

Therefore, the answer to the question "if c and d are positive integers and m is the greatest common factor of c and d, then m must be the greatest common factor of c and which of the following integers?" is that m must be the greatest common factor of c and both d.

To know more about integers visit:

https://brainly.com/question/929808

#SPJ11

select the correct location on the image. on the interval , at which x-value is the average rate of change 56

Answers

I would be happy to help you with your question.To select the correct location on the image for the interval, at which x-value is the average rate of change 56, we need to use the formula for average rate of change.

Average rate of change = (y2 - y1) / (x2 - x1)We can use this formula to calculate the average rate of change for different intervals and see where it equals 56. The location on the image will correspond to the x-value for the interval where the average rate of change is 56.Keep in mind that we need two points to calculate the average rate of change. So, we'll need to look at two different x-values. Here are the steps we can take to find the correct location:1. Choose an x-value, say x1.2. Calculate the corresponding y-value, y1.3. Choose another x-value, x2, that is different from x1.4. Calculate the corresponding y-value, y2.5. Use the formula for average rate of change to calculate the average rate of change between the two points.6. Repeat steps 1-5 for different intervals until you find the one where the average rate of change equals 56.Once you find the interval where the average rate of change equals 56, you can locate the correct location on the image.

To know more about average  , visit ;

https://brainly.com/question/130657

#SPJ11

The correct location on the image where the average rate of change is 56 is x = 4.

The correct location on the image where the average rate of change is 56 is x = 4. To determine the average rate of change of a function, we need to find the difference in the function's output values divided by the difference in its input values over a certain interval.

Therefore, the average rate of change between x = 2 and x = 6 is: average rate of change = (f(6) - f(2)) / (6 - 2). Substituting the values, we get: average rate of change = (50 - 2) / 4, average rate of change = 48 / 4, average rate of change = 12

Now, we know that the average rate of change is 56. So, we need to solve for x using the same formula: average rate of change = (f(6) - f(x)) / (6 - x)56 = (50 - f(x)) / (6 - x)56(6 - x) = 50 - f(x)336 - 56x = 50 - f(x)286 = f(x)

Now, we know that f(x) = x² - 6x + 2. So, we can solve for x by setting f(x) = 286:x² - 6x + 2 = 286x² - 6x - 284 = 0

Solving for x using the quadratic formula, we get: x = (-(-6) ± √((-6)² - 4(1)(-284))) / (2(1))x = (6 ± √(1452)) / 2x = (6 ± 38.078) / 2x = 22.039 or x = -16.039

We can eliminate the negative value since it doesn't make sense in the context of this problem.

To know more about average rate of change, visit:

https://brainly.com/question/13235160

#SPJ11

A graphing calculator is recommended Graph the polynomial, and determine how many local maxima and minima it has. y = 1.2x5 + 3.75x4-5x3-14x2 + 19x The polynomial has

Answers

The polynomial has two local minima and two local maxima when graphed using a graphing calculator.

Given polynomial: y = 1.2x⁵ + 3.75x⁴ - 5x³ - 14x² + 19x

To determine the local maxima and minima of the given polynomial, we need to find its derivative.

dy/dx = 6x⁴ + 15x³ - 15x² - 28x + 19To find the critical points of the function, we need to solve the above equation for dy/dx = 0. 6x⁴ + 15x³ - 15x² - 28x + 19 = 0

The above equation can be solved using a graphing calculator to find its roots.

Upon solving the above equation using a graphing calculator, we get:x ≈ -2.188x ≈ -1.255x ≈ 0.388x ≈ 1.055

We can now use the first derivative test to determine whether these critical points are the local maxima or minima.

If dy/dx changes sign from negative to positive, the critical point is a local minimum.

If dy/dx changes sign from positive to negative, the critical point is a local maximum.

Hence, the graph of the polynomial has:

One local maximum at x ≈ -2.188Two local minima at x ≈ -1.255 and x ≈ 0.388One local maximum at x ≈ 1.055

Therefore, the polynomial has two local minima and two local maxima when graphed using a graphing calculator.

Know more about polynomial here:

https://brainly.com/question/4142886

#SPJ11

Which of the following values cannot be probabilities? 3/5, √2,5/3, 0.02, 1, -0.56, 1.58,0 Select all the values that cannot be probabilities. A. -0.56 B. 5 3 C. 0 D. 1.58 E. √2 F. 3 5 G. 1 H. 0.0

Answers

C (0), F (3/5), G (1), and 0.02, are all valid probabilities.

A probability is a number that is between 0 and 1, inclusive.

As a result, the values that cannot be probabilities are those that are either less than 0 or greater than 1.

Here are the values from the list that are not probabilities:

Option A: -0.56 - Not a probability

Option B: 5/3 - Not a probability

Option D: 1.58 - Not a probability

Option E: √2 - Not a probability

Option H: 0.0 - Not a probability

Therefore, the values that cannot be probabilities are A (-0.56), B (5/3), D (1.58), E (√2), and H (0.0).

The other values, namely C (0), F (3/5), G (1), and 0.02, are all valid probabilities.

To know more about probability visit:

https://brainly.in/question/34187875

#SPJ11

For the generating function below, factor the denominator and use the method of partial fractions to determine the coefficient of xr
(2+x)/(2x2+x-1)

Answers

The required coefficient of xr is 5/6.

We need to factor the denominator of the generating function and use the method of partial fractions to determine the coefficient of xr as given below:

Given generating function is:(2 + x) / (2x² + x - 1)We will factorize the denominator of the given generating function,2x² + x - 1=(2x - 1) (x + 1)

Now we will use the method of partial fractions as shown below:

A / (2x - 1) + B / (x + 1) = (2 + x) / (2x² + x - 1)

We will multiply each side by the common denominator of (2x - 1) (x + 1)A(x + 1) + B(2x - 1) = 2 + x

Now we will put x = -1,A(0) - B(3) = 1  ---(1)

Now we will put x = 1/2,A(3/2) + B(0) = 4/3  ---(2)

Solving equations (1) and (2) for A and B, we get:A = 5/3 and B = -2/3

So the generating function, (2 + x) / (2x² + x - 1) can be written as:5 / (3 * (2x - 1)) - 2 / (3 * (x + 1))

Now we will write the generating function as a series expansion as shown below:5 / (3 * (2x - 1)) - 2 / (3 * (x + 1))= 5/3 [(1/2x - 1/2)] - 2/3 [ (1/1 - (-1/1))]

Rearranging the terms, we get:5/3 [(1/2) * xr - (1/2) * (1/x) * r] - 2/3 [1 * (-1)r]

So the coefficient of xr is 5/3 (1/2) = 5/6, when r = 1

Therefore, the coefficient of xr is 5/6.

To know more on equation visit

https://brainly.com/question/17145398

#SPJ11

(1 point) Find the least-squares regression line = bo + b₁ through the points For what value of x is y = 0? C= (-2, 0), (2, 7), (6, 13), (8, 18), (11, 27).

Answers

The regression equation for the given data is y = 2x + 3

What is the least-squares regression line?

To solve this problem, we need to calculate the least-square regression line;

Sum of X = 25

Sum of Y = 65

Mean X = 5

Mean Y = 13

Sum of squares (SSX) = 104

Sum of products (SP) = 208

Regression Equation = y = bX + a

b = SP/SSX = 208/104 = 2

a = MY - bMX = 13 - (2*5) = 3

y = 2x + 3

Learn more on regression equation here;

https://brainly.com/question/9302810

#SPJ4

Find the surface area of the part of the circular paraboloid z=x^2+y^2 that lies inside the cylinder x^2 +y^2=25

Answers

Let’s begin by finding the surface area of the part of the circular paraboloid z = x² + y² inside the cylinder x² + y² = 25.To find the surface area of this paraboloid, we can use a double integral with cylindrical coordinates, in which we can represent the surface in terms of r and θ values.

The paraboloid is symmetrical about the z-axis, the limits of θ are 0 to 2π. Therefore,θ is integral from 0 to 2π. Next, we want to express z as a function of r. So, we have,z = x² + y² = r².Using the equation of cylinder, we can say x² + y² = 25,which means r = 5.So, the limits of r are 0 and 5.Therefore,r is integral from 0 to 5.We can now use the formula for the surface area of a parametrized surface. This is given by:S = ∫∫(sqrt [1 + fr2 + fθ2]) rdrdθwhere f is the parametric representation of the surface.

To know more about circular paraboloid visit :-

https://brainly.com/question/14619139

#SPJ11

When would a Mantel randomisation test might be used and how the
significance of the test statistic is calculated

Answers

The p-value indicates the probability of observing a correlation as strong or stronger than the one observed if there is no true correlation between the two matrices.

A Mantel randomization test is a permutation test that is commonly used in ecology and evolutionary biology. It is often used to test the hypothesis that the geographic distance between two populations or communities is correlated with the degree of similarity or difference between them.

This test is used to test the hypothesis that the spatial arrangement of a group of objects (e.g., individuals, populations, communities) is related to the variation observed in a set of measurements or characteristics (e.g., genetic distance, ecological similarity).

The Mantel test is a type of correlation test that determines whether there is a correlation between two matrices, such as a matrix of geographic distances between sites and a matrix of genetic or ecological distances between those same sites. It works by permuting the rows and columns of one of the matrices many times and recalculating the correlation coefficient for each permutation.

The distribution of correlation coefficients obtained from the permutations can be used to calculate the p-value, which indicates the probability of observing a correlation as strong or stronger than the one observed if there is no true correlation between the two matrices. If the p-value is below a specified threshold, such as 0.05 or 0.01, the correlation is considered significant.

The Mantel test is a powerful tool for investigating the relationship between spatial and genetic or ecological variation, and it is widely used in studies of population genetics, community ecology, and biogeography. In summary, the significance of the test statistic is calculated using the distribution of correlation coefficients obtained from the permutations of the matrices.

The p-value indicates the probability of observing a correlation as strong or stronger than the one observed if there is no true correlation between the two matrices.

To know more about distribution visit:

https://brainly.com/question/29664127

#SPJ11

The table shows the number of grapes eaten over several minutes. What is the rate of change for the function on the table? 15 grapes eaten per minute 15 minutes to eat each grape 60 grapes eaten per minute 60 minutes to eat each grape
The table shows the number of grapes eaten over several - 1
Grapes Eaten Over Time
TIme in Minutes (x) Grapes Eaten (y)
1 15
2 30
3 45
4 60

Answers

The rate of change for the function given in the table is 15 grapes eaten per minute.

To find the rate of change for the function, we need to determine the change in the number of grapes eaten divided by the corresponding change in time. Looking at the table, we can observe that the number of grapes eaten increases by 15 for every 1-minute increase in time. This means that the rate of change is constant at 15 grapes per minute.

The rate of change represents how the dependent variable (grapes eaten) changes with respect to the independent variable (time). In this case, for every additional minute that passes, 15 more grapes are consumed. This rate remains consistent throughout the given data.

Therefore, the rate of change for the function represented by the table is 15 grapes eaten per minute.

Learn more about  rate of change here:

https://brainly.com/question/29181688

#SPJ11

The continuous random variable Y has a probability density function given by: f(y)=k(3-y) for 0 ≤ y ≤ 3,0 otherwise, for some value of k>0. What is the value of k? Number

Answers

The value of k is 2/9.

We are given a probability density function given by: f(y)=k(3-y) for 0 ≤ y ≤ 3,0 otherwise, for some value of k > 0. We have to find out the value of k.

First we can use the probability density function to calculate probability that Y lies between a and b as follows:

[tex]$$P(a < Y < b)=\int_{a}^{b} f(y) dy$$[/tex]

Now, let's use the above formula to calculate the value of k. Since k is a constant, it can be brought outside of the integral. Hence, [tex]$$\int_{0}^{3} f(y) dy=\int_{0}^{3} k(3-y) dy$$[/tex]
Let's solve this further,

[tex]$$\int_{0}^{3} k(3-y) dy=k\int_{0}^{3} 3-y[/tex]

[tex]dy=k\left[3y-\frac{y^{2}}{2}\right]_{0}^{3}=k\left[9-\frac{9}{2}\right]=\frac{9k}{2}$$Thus, $$\frac{9k}{2}=1 \Rightarrow k=\frac{2}{9}$$[/tex]

Therefore, the value of k is 2/9.

To know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

Use the following methods with step size h=1/3 to estimate y(2), where y(t) is the solution of the initial-value problem y' = -y, y(0) = 1. Find the absolute error in each case relative to the analytic solution y(t) = e . a) Euler method Result: 0.0877914951989027 Error: 0.04754 b) Implicit Euler method Result: 0.0877914951989027 Error: c) Crank-Nicolson method Result: Error: d) RK2 (Heun's method) Result: 0.141913948349864 Error: 0.006578665 e) RK4 (Classical 4th-Order Runge-Kutta method) Result: 0.13534 Error: 0.00001

Answers

a) Euler method: The estimated value of y(2) is 0.0877914951989027 with an absolute error of 0.04754.

b) Implicit Euler method: The estimated value of y(2) is 0.0877914951989027 with an unknown absolute error.

c) Crank-Nicolson method: The estimated value of y(2) is unknown with an unknown absolute error.

d) RK2 (Heun's method): The estimated value of y(2) is 0.141913948349864 with an absolute error of 0.006578665.

e) RK4 (Classical 4th-Order Runge-Kutta method): The estimated value of y(2) is 0.13534 with an absolute error of 0.00001.

a) Euler method:

Using the Euler method with a step size of h=1/3, we can approximate the solution y(t) at t=2. The formula for Euler's method is given by:

y_{i+1} = y_i + h * f(t_i, y_i),

where y_{i+1} is the approximation of y(t) at the next time step, y_i is the approximation at the current time step, h is the step size, and f(t, y) is the derivative of y with respect to t.

For this problem, f(t, y) = -y. We start with the initial condition y(0) = 1 and apply Euler's method to estimate y(2). The approximation obtained is 0.0877914951989027.

The absolute error is calculated by taking the absolute difference between the approximation and the exact solution y(t) = e at t=2, which results in an error of 0.04754.

b) Implicit Euler method:

The implicit Euler method is similar to the Euler method, but instead of using the derivative at the current time step, it uses the derivative at the next time step. In this case, we have an unknown result for the implicit Euler method.

c) Crank-Nicolson method:

The Crank-Nicolson method is a combination of the explicit and implicit Euler methods. It takes the average of the derivatives at the current and next time steps. Since the result of this method is unknown, we cannot calculate the absolute error.

d) RK2 (Heun's method):

The RK2 method, also known as Heun's method, uses a weighted average of the derivative at the current time step and an intermediate derivative. The formula for RK2 is given by:

k1 = h * f(t_i, y_i),

k2 = h * f(t_i + h, y_i + k1),

y_{i+1} = y_i + (k1 + k2) / 2.

Applying RK2 with a step size of h=1/3, we can estimate y(2) to be 0.141913948349864. The absolute error is calculated by comparing this approximation with the exact solution y(t) = e at t=2, resulting in an error of 0.006578665.

e) RK4 (Classical 4th-Order Runge-Kutta method):

The RK4 method is a higher-order approximation method that calculates four intermediate derivatives to estimate the value at the next time step. The formula for RK4 is given by:

k1 = h * f(t_i, y_i),

k2 = h * f(t_i + h/2, y_i + k1/2),

k3 = h * f(t_i + h/2, y_i + k2/2),

k4 = h * f(t_i + h, y_i + k3),

y_{i+1} = y_i + (k1 + 2k2 + 2k3 + k4) / 6.

Using RK4 with a step size of h=1/3, we can estimate y(2) to be 0.13534. The absolute error is calculated by comparing this approximation with the exact solution y(t) = e at t=2, resulting in an error of 0.00001.

For more questions like Value click the link below:

https://brainly.com/question/30145972

#SPJ11

2. Answer the following: a. Find P(Z > -1.5). b. Given a normal distribution with a mean of 25.5, a standard deviation of 1.2, find P(X

Answers

P(Z>-1.5) = 0.9332 , P(X < 25) = 0.334

a) To find the probability of P(Z>-1.5), we need to use the Standard Normal Distribution.  The Standard Normal Distribution is a normal distribution with a mean of 0 and a standard deviation of 1. This distribution is also known as the Z distribution. The formula for finding the standard score (Z score) for any given value (x) from a normally distributed population can be written as

Z = (X - μ)/σ

where X is the raw score

μ the mean of the populationσ is the standard deviation of the population

Substituting the values:

Z = (-1.5 - 0)/1= -1.5

Hence, P(Z>-1.5) = 0.9332 (from Z table).

b) Given, mean (μ) = 25.5, standard deviation (σ) = 1.2.

Find P(X < 25)

Using Standard Normal Distribution, we can write it as

z = (X - μ)/σ

On substituting values, we get:z = (25-25.5)/1.2= -0.42

Probability of X < 25 is P(Z< -0.42)

Hence, we need to find the value of P(Z< -0.42) using the Z table.

P(Z< -0.42) = 0.334

Hence, P(X < 25) = 0.334 (approximately).

To know more about Z score visit:

https://brainly.in/question/38673201

#SPJ11

This is a different variant of the coin changing problem. You are given denominations 1,r2,..,rn and you want to make change for a value B. You can use each denomination at most once and you can use at most k coins. Input: Positive integers x,....Xn. B,k Output: True/False, whether or not there is a subset of coins with value B where each denomination is used at most once and at most k coins are used. Design a dynamic programming algorithm for this problem. For simplicity, you can assume that

Answers

This problem requires to design a dynamic programming algorithm for finding out whether a subset of coins with value B, where each denomination is used at most once and at most k coins are used or not.

The given problem is a different variant of the coin changing problem. In this problem, we have been given denominations of coins from 1 to rn, and we want to make change for a value B. We are supposed to use each denomination at most once and can use at most k coins. Therefore, we have to come up with a solution that satisfies the above-mentioned conditions. A Dynamic Programming approach can be used to solve this problem. We will maintain an array of n rows and B+1 columns, dp[0,0] being 0 and all other values being infinite. At every step i in our loop, we will traverse from B to Xj (where Xj is the denomination in the current iteration).

TO know more about  coins visit:

brainly.com/question/29869268

#SPJ11

A storm is approaching and causing the depth of the water in the bay to fluctuate. The depth D(t), in meters, can be described by the function D of t is equal to 3 times sine of the quantity pi over 5 times t end quantity plus 10 comma such that t represents the time in minutes. Which of the following graphs represents the depth of the water in the bay?

graph of sinusoidal function that increases through the point 0 comma 10 to a maximum at 2 and 5 tenths comma 16 then down to a minimum at 7 and 5 tenths comma 4 and then back up to a maximum at 12 and 5 tenths comma 16 and then down to a minimum in a periodic manner
graph of sinusoidal function that decreases through the point 0 comma 16 to a minimum at 5 comma 4 then up to a maximum at 10 comma 16 and then back down to a minimum at 15 comma 4 and then up to a maximum in a periodic manner
graph of sinusoidal function that increases through the point 0 comma 10 to a maximum at 2 and 5 tenths comma 13 then down to a minimum at 7 and 5 tenths comma 7 and then back up to a maximum at 12 and 5 tenths comma 13 and then down to a minimum in a periodic manner
graph of sinusoidal function that decreases through the point 0 comma 13 to a minimum at 5 comma 7 then up to a maximum at 10 comma 13 and then back down to a minimum at 15 comma 7 and then up to a maximum in a periodic manner

Answers

Answer:

don't worry I'm here if you like please mark me as brainlist

The correct graph that represents the depth of the water in the bay described by the function D(t) = 3sin(pi/5 * t) + 10 is:

Graph of sinusoidal function that increases through the point (0, 10) to a maximum at (2.5, 16), then decreases to a minimum at (7.5, 4), then increases to another maximum at (12.5, 16), and finally decreases to a minimum in a periodic manner.

Therefore, the correct option is:

graph of sinusoidal function that increases through the point 0, 10 to a maximum at 2 and 5 tenths, 16 then down to a minimum at 7 and 5 tenths, 4 and then back up to a maximum at 12 and 5 tenths, 16 and then down to a minimum in a periodic manner.

what is stated by the alternative hypothesis (h1) for an anova?

Answers

In an ANOVA, the alternative hypothesis (H1) specifies that there is a statistically significant difference between at least two group means. In other words, it is an assertion that the null hypothesis is incorrect, and the data is evidence of an actual distinction between groups that was not due to chance.

The alternative hypothesis, H1, is a statement of the phenomenon that the researcher wants to study. It is a generalization that supposes that there is a distinction between two or more groups. In the context of an ANOVA, this is typically the hypothesis that at least one of the means is different from the others.

The alternative hypothesis (H1) is generally the opposite of the null hypothesis (H0), which proposes that there is no significant difference between the means of the groups being tested.

In other words, if the null hypothesis is rejected, the alternative hypothesis is accepted. To conclude, the alternative hypothesis (H1) states that there is a significant difference between at least two group means.

To know more about Null  visit :

https://brainly.com/question/31031308

#SPJ11

Samples of n = 6 items are taken from a manufacturing process at regular intervals. A normally distributed quality characteristic is measured and x-bar and S values are calculated for each sample. After 50 subgroups have been analyzed, we have ΣX=1000, Σ₁ S₁ = 75. Compute control limits Si for the x-bar control chart. Select one: O a. UCL = 1096.5, LCL = 903.5 O b. UCL = 182.8, LCL = 150.6 OC. UCL = 21.9, LCL = 18.1 O d. UCL = 24.5, LCL = 15.5 Oe. UCL 1000, LCL = 75 Samples of n = 6 items are taken from a manufacturing process at regular intervals.

Answers

Thus, the UCL and LCL control limits are:UCL = 24.5LCL = 15.5Therefore, the correct answer is option d.

To compute the control limits Si for the x-bar control chart, let us use the formula below:Upper Control Limit (UCL) = X + A2(standard deviation of the means)Lower Control Limit (LCL) = X - A2(standard deviation of the means)Where X is the sample mean, A2 is the constant based on the number of samples, and the standard deviation of the means (Si) is computed using the formula below:Si = √∑Si² / k - 1where k is the number of samples.After 50 subgroups have been analyzed, ΣX = 1000 and Σ₁S₁ = 75. The sum of squares of Si can be computed as follows:SSi = ΣSi² - [(ΣSi)² / k]SSi = 75² - [(∑Si)² / 50]SSi = 5625 - [(∑Si)² / 50]SSi = 5625 - [S² / 50]Given that n = 6, the constant A2 can be found on the table of constants and is equal to 0.5772. Let S be the estimated value of Si.UCL = X + A2(S/√n)LCL = X - A2(S/√n)X = ΣX / nk = 50UCL = 1000 / 50 + 0.5772(S/√6) => 20 + 0.5772(S/√6)LCL = 1000 / 50 - 0.5772(S/√6) => 20 - 0.5772(S/√6)If we use the estimated value of S, we will have:UCL = 1000 / 50 + 0.5772(√[(5625 - S² / 50]) / √6)LCL = 1000 / 50 - 0.5772(√[(5625 - S² / 50]) / √6)Thus, the UCL and LCL control limits are:UCL = 24.5LCL = 15.5Therefore, the correct answer is option d.

To know more about Normal distribution visit:

https://brainly.com/question/30999174

#SPJ11

explain the difference between stratified random sampling and cluster sampling.

Answers

Stratified random sampling and cluster sampling are both methods used in statistical sampling, but they differ in how they group and select the elements from the population.

Stratified Random Sampling:

Stratified random sampling involves dividing the population into distinct subgroups or strata based on certain characteristics or variables. The strata should be mutually exclusive and collectively exhaustive, meaning that every element in the population should belong to one and only one stratum. Then, within each stratum, a random sample is selected using a random sampling method (such as simple random sampling or systematic sampling). The sample size from each stratum is determined proportionally based on the size or importance of the stratum.

The purpose of stratified random sampling is to ensure that the sample represents the population well by ensuring representation from each subgroup. This technique is useful when there are important variables or characteristics that may affect the outcome of interest, and you want to ensure that each subgroup is adequately represented in the sample.

Cluster Sampling:

Cluster sampling involves dividing the population into clusters or groups. These clusters are heterogeneous, meaning that they are representative of the entire population. The clusters are randomly selected from the population using a random sampling method (such as simple random sampling or systematic sampling). Then, all elements within the selected clusters are included in the sample.

Cluster sampling is useful when it is difficult or impractical to create a sampling frame for the entire population. Instead of directly selecting individual elements, you select clusters that are representative of the population. It is particularly useful when the population is geographically dispersed or when the cost of sampling or data collection is a concern.

In summary, the main difference between stratified random sampling and cluster sampling lies in how the population is divided and how the sampling units are selected. Stratified random sampling divides the population into homogeneous strata and selects samples from each stratum, while cluster sampling divides the population into heterogeneous clusters and selects entire clusters as samples.

Learn more about sampling here:

https://brainly.com/question/27860316

#SPJ11

2. (10p) A 40-gallon tank has a small leak at the bottom. The volume remaining in a full 40 gallon tank of water after t minutes can be modeled by the following equation V(t)=40 1) = 40(1-15). where V

Answers

In the equation V(t) = 40(1 - 0.15), 40 represents the initial volume of the tank when it is completely filled with water. Thus, the answer is, "40 represents the initial volume of the tank when it is completely filled with water."

Question: A 40-gallon tank has a small leak at the bottom. The volume remaining in a full 40 gallon tank of water after t minutes can be modeled by the following equation V(t)=40(1-15). where V(t) represents the volume remaining, in gallons, in the tank after t minutes.

a) What does 40 represent in the equation?

b) What does 1-0.15 represent in the equation?

c) How much water is left in the tank after 60 minutes?

Solution:

a) In the equation V(t) = 40(1 - 0.15), 40 represents the initial volume of the tank when it is completely filled with water. Thus, the answer is, "40 represents the initial volume of the tank when it is completely filled with water."

b) In the equation V(t) = 40(1 - 0.15), 1 - 0.15 represents the fraction of the initial volume of water left in the tank after t minutes. Here, 0.15 is the rate of leakage of the tank, which means that for every minute, 15% of the water will leak out. So, 1 - 0.15 will give the remaining fraction of water in the tank. Thus, the answer is, "1 - 0.15 represents the fraction of the initial volume of water left in the tank after t minutes."

c) To find out the volume of water left in the tank after 60 minutes, we need to substitute t = 60 in the equation V(t) = 40(1 - 0.15).V(60) = 40(1 - 0.15×60) = 40(1 - 9) = 40×(-8) = -320. Since the volume of water left cannot be negative, the answer is, "No water will be left in the tank after 60 minutes."Note: As the volume of water left can not be negative, the tank is empty after 8.8 minutes.

To know more about volume visit: https://brainly.com/question/28058531

#SPJ11

suppose relation r(a,b,c) currently has only the tuple (0,0,0), and it must always satisfy the functional dependencies a → b and b → c. which of the following tuples may be inserted into r legally?

Answers

Based on the analysis, the tuples that may be inserted into relation r(a, b, c) legally while satisfying the given functional dependencies are (0, 1, 1) and (1, 1, 1).

To determine which tuples may be inserted into relation r(a, b, c) legally while satisfying the given functional dependencies a → b and b → c, we can check if the tuples preserve the dependencies.

The functional dependencies a → b means that for any value of a, there is a unique value of b associated with it. Similarly, the functional dependency b → c means that for any value of b, there is a unique value of c associated with it.

Given that the relation currently has only the tuple (0, 0, 0), we need to check which tuples can be inserted while maintaining the dependencies.

Let's analyze the options:

(1, 0, 0): This tuple violates the functional dependency a → b, as for a = 1, the associated value of b is 0, not 1. Therefore, this tuple cannot be inserted legally.

(0, 1, 1): This tuple satisfies both functional dependencies. For a = 0, we have b = 1, and for b = 1, we have c = 1. Therefore, this tuple can be inserted legally.

(1, 1, 0): This tuple violates the functional dependency b → c, as for b = 1, the associated value of c is 1, not 0. Therefore, this tuple cannot be inserted legally.

(1, 1, 1): This tuple satisfies both functional dependencies. For a = 1, we have b = 1, and for b = 1, we have c = 1. Therefore, this tuple can be inserted legally.

To know more about functional dependencies,

https://brainly.com/question/31449637

#SPJ11

The tuples that may be legally inserted into relation r is (1, 2, 3). The correct answer is A.

To determine which tuples may be legally inserted into relation r(a, b, c), we need to ensure that the functional dependencies a → b and b → c are satisfied.

The functional dependency a → b means that for each value of a, there can be at most one corresponding value of b. Similarly, the functional dependency b → c means that for each value of b, there can be at most one corresponding value of c.

Let's examine the given tuples to see which ones can be inserted legally:

(1, 2, 3)

Here, a = 1, b = 2, and c = 3. This tuple satisfies both functional dependencies, as there is only one value of b (2) for a = 1, and only one value of c (3) for b = 2. Therefore, this tuple can be inserted legally into relation r.

(1, 2, 4)

Again, a = 1, b = 2, and c = 4. This tuple satisfies both functional dependencies, as there is only one value of b (2) for a = 1, and only one value of c (4) for b = 2. Therefore, this tuple can be inserted legally into relation r.

(1, 3, 5)

In this case, a = 1, b = 3, and c = 5. This tuple satisfies the functional dependency a → b, as there is only one value of b (3) for a = 1. However, it does not satisfy the functional dependency b → c, as there is no value of c associated with b = 3 in the relation. Therefore, this tuple cannot be inserted legally into relation r.

(2, 2, 3)

Here, a = 2, b = 2, and c = 3. This tuple does not satisfy the functional dependency a → b, as there are multiple values of b (2) for a = 2. Therefore, this tuple cannot be inserted legally into relation r.

Based on the analysis, the tuples that may be legally inserted into relation r  is (1, 2, 3). The correct answer is A.

Your question is incomplete but most probably your full question is

Suppose relation R(A,B,C) currently has only the tuple (0,0,0), and it must always satisfy the functional dependencies A → B and B → C. Which of the following tuples may be inserted into R legally?

(1,2,3)

(1,2,0)

(1,0,0)

(1,1,0)

Learn more about tuple at https://brainly.com/question/16944584

#SPJ11

Suppose that 30% of skateboards stolen in a community are
recovered. What is the probability that, at least one skateboard
out of 7 randomly selected cases of stolen skateboards is
recovered?

Answers

The answer is 0.9176.

To find the probability that at least one skateboard out of 7 randomly selected cases is recovered, we can use the complement rule.

The complement of "at least one skateboard is recovered" is "no skateboards are recovered." So, we can calculate the probability of no skateboards being recovered and then subtract it from 1 to get the desired probability.

The probability of no skateboards being recovered in a single case is given by (1 - 0.30) = 0.70 (since 30% are recovered, 70% are not recovered).

The probability of no skateboards being recovered in all 7 cases is calculated by multiplying the probabilities together since the events are independent. Therefore, the probability of no skateboards being recovered in 7 cases is (0.70)^7.

Now, to find the probability of at least one skateboard being recovered, we subtract the probability of no skateboards being recovered from 1:

P(at least one skateboard recovered) = 1 - P(no skateboards recovered)
P(at least one skateboard recovered) = 1 - (0.70)^7

Calculating the value:

P(at least one skateboard recovered) = 1 - (0.70)^7 ≈ 1 - 0.082354 = 0.917646

Therefore, the probability that at least one skateboard out of 7 randomly selected cases of stolen skateboards is recovered is approximately 0.9176.

The probability that at least one skateboard out of 7 randomly selected cases of stolen skateboards is recovered is approximately 99.96%.

To find the probability of at least one skateboard being recovered, we can calculate the complementary probability of none of the skateboards being recovered and subtract it from 1.

The probability of not recovering a skateboard in a single case is 1 - 0.3 = 0.7, as the complement of recovering a skateboard (30% recovered) is not recovering it (100% - 30% = 70%).

The probability of none of the skateboards being recovered in 7 cases can be calculated as (0.7)⁷, as each case is independent and we multiply the probabilities together.

The complementary probability, which is the probability of at least one skateboard being recovered, is 1 - (0.7)⁷.

Calculating the result:

1 - (0.7)⁷ ≈ 0.9996

In light of this, there is a 99.96% chance that at least one stolen skateboard will be found out of the seven cases that were randomly chosen.

To know more about probability, refer here:

https://brainly.com/question/12629667#

#SPJ11

Identify the lateral area and surface area of a regular square pyramid with base edge length 11 cm and slant height 15 cm, rounded to the nearest tenth.
a. Lateral area = 404.3 cm², Surface area = 448.1 cm²
b. Lateral area = 363.2 cm², Surface area = 399.6 cm²
c. Lateral area = 484.2 cm², Surface area = 532.6 cm²
d. Lateral area = 242.1 cm², Surface area = 266.3 cm²

Answers

Therefore, the correct option is: c. Lateral area = 484.2 cm², Surface area = 532.6 cm²

To find the lateral area and surface area of a regular square pyramid, we can use the following formulas:

Lateral Area = 4 * (base edge length) * (slant height) / 2

Surface Area = (base area) + (Lateral Area)

Given:

Base edge length = 11 cm

Slant height = 15 cm

First, let's calculate the lateral area:

Lateral Area = 4 * (11 cm) * (15 cm) / 2

Lateral Area = 220 cm² * 2

Lateral Area = 440 cm²

Next, we need to calculate the base area. Since the base of the pyramid is a square, and the base edge length is given as 11 cm, the base area is:

Base Area = (base edge length)²

Base Area = 11 cm * 11 cm

Base Area = 121 cm²

Now, let's calculate the surface area:

Surface Area = (Base Area) + (Lateral Area)

Surface Area = 121 cm² + 440 cm²

Surface Area = 561 cm²

Rounding the values to the nearest tenth, we have:

Lateral Area ≈ 440.0 cm²

Surface Area ≈ 561.0 cm²

To know more about Lateral area,

https://brainly.com/question/29007884

#SPJ11

The lateral area and surface area of a regular square pyramid with base edge length 11 cm and slant height 15 cm is  404.3 cm²and 448.1 cm² respectively.

To find the lateral area and surface area of a regular square pyramid, we can use the following formulas:

Lateral Area = base perimeter * slant height / 2

Surface Area = base area + lateral area

Given that the base edge length is 11 cm and the slant height is 15 cm, we can calculate the lateral area and surface area:

First, we find the base area by multiplying the base edge length by 4 (since it's a square):

Base perimeter = 4 * 11 = 44 cm

Now, we can calculate the lateral area using the formula:

Lateral Area = 4 * (base edge length) * (slant height) / 2

Lateral Area = 4 * (11 cm) * (15 cm) / 2

Lateral Area = 220 cm² * 2

Lateral Area = 440 cm²

Next, we need to find the base area. Since it's a square, the base area is the square of the base edge length:

Base Area = 11² = 121 cm²

Finally, we can calculate the surface area using the formula:

Surface Area = Base Area + Lateral Area = 121 + 440 = 561 cm² (rounded to the nearest tenth)

Therefore, the correct answer is:

Lateral area = 404.3 cm², Surface area = 448.1 cm²

To know more about Lateral area,

brainly.com/question/29007884

#SPJ11

Mr. Zin has contributed ​$116.00 at the end of each month into an RRSP paying 3% per annum compounded - General Annuity - Finding FV and PV. a) How much will Mr. Zin have in the RRSP after 10​years? b)How much of the above amount is interest.

Answers

a) After 10 years, Mr. Zin will have approximately $16,718.73 in the RRSP.

b) The interest earned over the 10-year period will be approximately $6,718.73.

To calculate the future value (FV) of Mr. Zin's RRSP after 10 years, we can use the formula for the future value of a general annuity:

FV = P * [(1 + r)^n - 1] / r

Monthly contribution = $116.00

Annual interest rate = 3% = 0.03 (converted to decimal)

Number of periods = 10 years * 12 months/year = 120 months

Plugging in the values, we get:

FV = $116.00 * [(1 + 0.03)^120 - 1] / 0.03

  ≈ $16,718.73

So, after 10 years, Mr. Zin will have approximately $16,718.73 in his RRSP.

To calculate the interest earned, we subtract the principal amount (the total contributions made) from the future value:

Interest = FV - PV

Since the principal amount (PV) is the total contributions made, which is $116.00 * 120 months = $13,920.00, we have:

Interest = $16,718.73 - $13,920.00

        ≈ $2,798.73

Therefore, the interest earned over the 10-year period will be approximately $2,798.73.

Learn more about Compound interest

brainly.com/question/14295570

#SPJ11

Other Questions
Complete each sentence with one of the following words. Do not use a word more than once. There are more words than needed. ( /5 marks) backgrounds progress conduct participants memory criticised skilfully 1. All the children in the class have to 2. At the end of the conference, all the 3. In our class we have students who come from different cultural = their own science experiments in the lab. were asked to fill out a questionnaire. 4. The Italian newspapers 5. The painter used the colours # the government for failing to achieve their promised plans. to produce feelings of joy and happiness. which statement is not associated with covalent catalysis by enzymes? a. It never involves coenzymes.b. A transient covalent bond is formed between the enzyme and the substrate.c. When the reaction is complete, the enzyme returns to its original state.d. A new pathway from substrate(s) to product(s) is formed that is faster than the uncatalyzed reaction. Show that the following function is a bijection and give its inverse.f : Z N with f (n) = 2n if n 0 and f (n) = 2n 1 if n < 0. Julius Caesar owned an apartment building. On February 1, 2016, Julius rented an apartment to Alfred Spartacus. Alfred signed a lease agreement to rent the apartment for one year at a cost of $3,000 per month. On August 1, 2016, without any notice, Alfred moved out of the apartment and moved to San Francisco where he had gotten a new job. On February 1, 2017, Julius sued Alfred for $18,000, the amount of the rent owed for the final six months of the lease. Julius made no effort to rent the apartment until February 1, 2017. Julius would have been able to rent the apartment for $2,000 per month during the final three months of the lease. A court would likely rule: Answer ASAPAn engineer is choosing between three different alternatives fora machine component he needs to complete his biorefinery. Hesummarized the pertinent information about these alternatives Which of the following is an example of active transport in a cell? a. Calcium passing through channel proteins, from high to low solute concentration. b. Sodium moving out of the cells against its concentration gradient. c. Oxygen entering the cell without the use of energy.d. None of the above are correct. 45. A blender manufacturer with excess capacity has analyzed its costs and found that the lowest price it can accept for a major order (and still attain its profit goal) is $10 per unit. This illustratesa price floor.penetration pricing.a price ceiling.variable pricing.49. magazine with a high number of competing ads relative to editorial content haslow frequency.high message permanence.high clutter.high waste. How does a cell rid itself of defective or malfunctioning organelles ? A. They are engulfed by plastids and stored until export from cell is possible. B. Defective parts accumulate until the cell itself dies. C. They are exported by exocytosis. D. Lysosomes assist in the removal of defective organelles by digesting them.Read more on Sarthaks.com - https://www.sarthaks.com/2377219/how-does-a-cell-rid-itself-of-defective-or-malfunctioning-organelles Business Law And Ethics! 1. Business Regulation Has Generally __________, And As A Result Administrative Laws Reach Over Business Has Greatly __________. Decreased; Expanded Decreased; Shrunk Declined; Contracted Increased; Contracted Increased; Expanded 2. Supposed That BigCo Is A Construction Company Specializing In Building Skyscrapers. TheBusiness Law and Ethics!1. Business regulation has generally __________, and as a result administrative laws reach over business has greatly __________.Decreased; expandedDecreased; shrunkDeclined; contractedIncreased; contractedIncreased; expanded2. Supposed that BigCo is a construction company specializing in building skyscrapers. The construction of skyscrapers is regulated by an administrative agency and subject to regulatory record keeping, reporting, and inspections. The agency arrives at one of BigCo's sites to conduct a safety inspection. BigCo denies the agency entrance to the site because the agency did not obtain a warrant. Which of the following is true?The agency does not need a warrant because BigCo is pervasively regulated.The agency needs a warrant to establish probable cause.The agency does not need a warrant because BigCo is a private company.A warrant is only required if the agency was investigating criminal charges.The agency needs a warrant because it was a surprise inspection. Rubium Micro Devices currently manufactures a subassembly for its main product. The costs per unit are as follows: $50.00 Direct materials Direct labor Variable overhead 30.00 38.00 Fixed overhead 32.00 Total $158.00 Crayola Technologies Inc. has contacted Rubium with an offer to sell 8000 of the subassemblies for $144.00 each. Rubium will eliminate $85,000 of fixed overhead if it accepts the proposal, What are the relevant costs for Rubium? $1,349,000 $741,000 $789.000 $1,093,000 According to Wayne Cascio's "Decency Means More than Always Low Prices: A Comparison of Costco to Wal-Mart's Sam's Club," which of the following statements best reflects Costco's management philosophy: A low wage strategy can be compensated for with excellent benefits Decency means hiring more employees Shareholder wealth creation supports job growth Treating employees and customers well will benefit shareholders Decency means treating customers well Question 14 1 pts In the reading "Sex Discrimination Claims under Title VII of the Civil Rights Act of 1964," the primary point authors Liu, Macgill, and Vora make is that sexual harassment is: a form of sexual discrimination and covered by Title VII the violation of personal property rights not a legal liability for the organization since it is not covered by Title VII the abuse of power by men toward women the oppression of women as a class Foreign direct investment Which of the following statements about foreign direct investment (FDI) are correct? Check all that apply. Keep the Highest: 2135 Horizontal FDI occurs when a firm in an industrial country owns a plant in a developing country. FDI is conducted in anticipation of future profits An American firm that owns a plant in Europe has to pay tariffs on the goods it sells there, just as it would if those goods were imported from the United States ? FDI occurs when a firm in one country owns a firm in another country. ? FDI is a poor strategy of technology transfer. affirmative action programs guarantee workplace diversity. true false Explain the effects of different microeconomic variables inequity investment. for a certain chemical reaction, h=40.0kj and s=89.5j/k. find the vertex, focus, and directrix of the parabola. x2 = 2y vertex (x, y) = focus (x, y) = directrix what is the final enzyme used in the biosynthesis of stearate (c18:0)? What is the greatest common factor of x^6 and x^9?a) x^3b) x^6c) x^9d) x^15 Discuss various kinds of Interview methods used in research? The move by Philip Morris International (PMI), the industry-leading tobacco company, to invest billions in creating a smoke-free future is an example ofMultiple Choicecurrent reality assessment.operational goals.vision.strategy innovation.