Find the explicit particular solution of the differential equation for the initial value provided. dy/dx=9x^6y-y, y(1)= -10

he indefinite integral of (x - 1)/(x² + 2x)² dx is (1/8) ln|x + 2| - (1/8) ln|x| - 1/(4(x + 1)²) + C, where C is the constant of integration.

To evaluate the indefinite integral ∫(x - 1)/(x² + 2x² + 2x)² dx, we can proceed with a substitution. Let u = x² + 2x. Then, du = (2x + 2) dx.

Now, let's rewrite the integral in terms of u:

∫(x - 1)/(x² + 2x² + 2x)² dx = ∫(x - 1)/(u²)² * (1/(2x + 2)) du

= ∫(x - 1)/(4u²) * (1/(2x + 2)) du

= ∫(x - 1)/(8u²) * (1/(x + 1)) du

We can simplify the expression further

∫(x - 1)/(8u²) * (1/(x + 1)) du = ∫(x - 1)/(8(x² + 2x)²) du

Now, we can split the integrand into partial fractions

(x - 1)/(8(x² + 2x)²) = A/(x² + 2x) + B/(x² + 2x)²

To find the values of A and B, let's find the common denominator:

A(x² + 2x)² + B(x² + 2x) = x - 1

Expanding and combining like terms:

(A + B) x³ + (4A + 2B) x² + (4A) x + (4A) = x - 1

Matching coefficients, we have the following equations

A + B = 0 (coefficient of x³ terms)

4A + 2B = 0 (coefficient of x² terms)

4A = 1 (coefficient of x terms)

4A = -1 (constant terms)

From the first equation, B = -A.

Substituting this into the second equation: 4A + 2(-A) = 0, we get A = 0.

From the fourth equation: 4A = -1, we find A = -1/4.

Therefore, A = -1/4 and B = 1/4.

Now, we can rewrite the integral with the partial fractions:

∫(x - 1)/(8(x² + 2x)²) du = ∫(-1/4)/(x² + 2x) dx + ∫(1/4)/(x² + 2x)² dx

Let's evaluate each integral separately

∫(-1/4)/(x² + 2x) dx = (-1/4) ∫1/(x(x + 2)) dx

We can apply the method of partial fractions again for this integral. Let's find the values of C and D such that:

1/(x(x + 2)) = C/x + D/(x + 2)

Multiplying both sides by x(x + 2), we get:

1 = C(x + 2) + Dx

Expanding and combining like terms:

1 = (C + D) x + 2C

Matching coefficients, we have:

C + D = 0 (coefficient of x terms)

2C = 1 (constant terms)

From the first equation, D = -C.

Substituting this into the second equation: C - C = 0, we get C = 1/2.

Therefore, C = 1/2 and D = -1/2.

Now, let's rewrite the integral:

∫(-1/4)/(x² + 2x) dx = (-1/4) ∫(1/2x - 1/2(x + 2)) dx

= (-1/8) ln|x| - (-1/8) ln|x + 2| + K1

= (1/8) ln|x + 2| - (1/8) ln|x| + K1

Next, let's evaluate the second integral

∫(1/4)/(x² + 2x)² dx = (1/4) ∫1/(x² + 2x)² dx

We can apply a u-substitution here. Let u = x² + 2x + 1. Then, du = (2x + 2) dx.

Rewriting the integral in terms of u:

(1/4) ∫1/(x² + 2x)² dx = (1/4) ∫1/u² du

= (1/4) (-1/u) + K₂

= -1/(4u) + K₂

Substituting back u = x₂ + 2x + 1:

-1/(4u) + K₂ = -1/(4(x² + 2x + 1)) + K₂

= -1/(4(x + 1)²) + K2

Finally, we can combine the results of both integrals

∫(x - 1)/(8(x² + 2x)²) dx = (1/8) ln|x + 2| - (1/8) ln|x| - 1/(4(x + 1)²) + C

So, the indefinite integral of the given expression is (1/8) ln|x + 2| - (1/8) ln|x| - 1/(4(x + 1)²) + C, where C is the constant of integration.

To know more about integration:

https://brainly.com/question/31954835

#SPJ4

--The given question is incomplete, the complete question is given below " Evaluate the indefinite integral. (Use C for the constant of

integration.) ∫(x - 1)/(x² + 2x² + 2x)²dx "--

The function y = x  satisfies the given differential equation  4y'' + 2y' − 2y = 0 when x = 1.

To determine the values of r for which the function y = x  satisfies the given differential equation  4y'' + 2y' − 2y = 0,  we need to substitute y = x   into the equation and solve for r.

First, let's find the first and second derivatives of y = x

y' = 1

y" = 0

Now, substitute these derivatives, and y = x into the differential equation:

4y'' + 2y' − 2y = 0 =

= 4(0) + 2(1) - 2(x) = 0

2 - 2x  = 0

x = 1

Therefore, the function y = x  satisfies the given differential equation  4y'' + 2y' − 2y = 0 when x = 1.

To learn about differential equations here:

https://brainly.com/question/1164377

#SPJ11

The R code provided performs various data manipulation tasks, including creating variables, combining vectors into a dataframe, and summarizing data. It does not require any external visual representation.

Task 1:

1. The `str()` function is used to investigate the structure of the `my_mtcars` dataframe. It will display information about the variables and observations in the dataframe.

2. To calculate engine displacement per cylinder, you need to divide a variable (XXXX) by the `cyl` variable. Replace the two XXXX placeholders with the name of the variable representing engine displacement.

  For example, if the variable representing engine displacement is named `disp`, the code will be:

  `my_mtcars$UnitEngine <- my_mtcars$disp / my_mtcars$cyl`

3. Use the `summary()` function to summarize the newly created variable `UnitEngine` and display descriptive statistics.

Task 2:

4. Create a numeric vector named `Pets` with the numbers (1, 1, 1, 0, 0).

  `Pets <- c(1, 1, 1, 0, 0)`

5. Create a numeric vector named `Order` with the numbers (3, 1, 2, 3, 3).

  `Order <- c(3, 1, 2, 3, 3)`

  Note: The instructions for creating the 'Order' vector were not provided in the given code, so it is assumed that you need to create it here.

6. Create numeric vectors `Siblings` and `IDs` with the provided values.

7. Combine all four vectors (`Pets`, `Order`, `Siblings`, `IDs`) into a dataframe named `myFriends` using the `data.frame()` function.

8. Use `str()` to display the structure of the dataframe and `summary()` to summarize the dataframe.

9. To list all values of the 'Pets' variable, use `myFriends$Pets`.

10. To print the value in the fifth observation of the 'Pets' variable, use `myFriends$Pets[5]`.

11. Use `cbind()` to add a vector called 'age' to 'myFriends'.

12. Define a vector named `names` with the given names. Then use `cbind()` to add the 'names' vector to 'myFriends'. Print the structure of 'myFriends' to see the data type of the 'names' variable.

Note: Please make sure to replace the XXXX placeholders and follow the instructions carefully to obtain accurate results.

To learn more about vector, click here: brainly.com/question/12985874

#SPJ11

Answer:

1/36

Step-by-step explanation:

[tex](-6)^{-2}[/tex] can be written as:

[tex]\frac{1}{(-6)^{2} }[/tex] (this is done by the law of indices [tex]a^{-m}=\frac{1}{a^{m} }[/tex] )

then by simplifying the above expression, we get:

[tex]\frac{1}{(-6 * -6)} =\frac{1}{36}[/tex]

So the final answer is 1/36 ( [tex]\frac{1}{36}[/tex] )

The integration of \[ \int 14 x \ln 7 x d x \] using integration by parts formula is \[ 7x^2 \ln 7x - \frac{7}{2} x^2 + C \], where C is the constant of integration.

To evaluate the integral \[ \int 14 x \ln 7 x d x \] using integration by parts, we can follow the integration by parts formula.

The integration by parts formula is given as:
\[ \int u dv = uv - \int v du \]

Let's choose the functions u and dv.

Let u = \ln 7x, and dv = 14x dx.

Now, let's find du and v.

To find du, we differentiate u with respect to x.
\[ du = \frac{1}{7x} \cdot 7 dx = \frac{1}{x} dx \]

To find v, we integrate dv with respect to x.
\[ v = \int 14x dx = 7x^2 \]

Now we can apply the integration by parts formula:
\[ \int 14 x \ln 7 x d x = \int u dv = uv - \int v du \]

Substituting the values we found, we have:
\[ \int 14 x \ln 7 x d x = \ln 7x \cdot 7x^2 - \int 7x^2 \cdot \frac{1}{x} dx \]

Simplifying further:
\[ \int 14 x \ln 7 x d x = 7x^2 \ln 7x - 7 \int x dx \]

Evaluating the integral:
\[ \int 14 x \ln 7 x d x = 7x^2 \ln 7x - \frac{7}{2} x^2 + C \]

Therefore, the integral \[ \int 14 x \ln 7 x d x \] using integration by parts is equal to \[ 7x^2 \ln 7x - \frac{7}{2} x^2 + C \], where C is the constant of integration.

To know more about integration by parts refer here:

https://brainly.com/question/22747210

#SPJ11

The position of the particle with acceleration and velocity s(t) = [tex]6t^3 + t^2 + 2t + 15[/tex] at time t = 4 is 446.

To determine the position of the particle at time t = 4, we need to integrate the given acceleration function to obtain the velocity function, and then integrate the velocity function to find the position function.

Given acceleration a(t) = 36t + 2, we integrate it to find the velocity function v(t):

∫a(t) dt = ∫(36t + 2) dt

v(t) = 18[tex]t^2[/tex] + 2t + C

Next, we use the initial condition v(0) = 2 to find the constant C:

v(0) = 18[tex](0)^2[/tex] + 2(0) + C = C = 2

Therefore, the velocity function becomes v(t) = 18[tex]t^2[/tex] + 2t + 2.

Now, we integrate the velocity function to find the position function s(t):

∫v(t) dt = ∫(18[tex]t^2[/tex] + 2t + 2) dt

s(t) = [tex]6t^3 + t^2 + 2t + D[/tex]

Using the initial condition s(0) = 15 to find the constant D:

s(0) = [tex]6(0)^3 + (0)^2 + 2(0) + D = D = 15[/tex]

Hence, the position function becomes s(t) = [tex]6t^3 + t^2 + 2t + 15[/tex].

To find the position at t = 4, we substitute t = 4 into the position function:

s(4) =[tex]6(4)^3 + (4)^2 + 2(4) + 15[/tex]

s(4) = 384 + 16 + 8 + 15

s(4) = 423 + 23

s(4) = 446

Therefore, the position of the particle at time t = 4 is 446 units.

Learn more about velocity here:

https://brainly.com/question/32316091

#SPJ11

To find the indicated value of the given function \[f(x, y)=7 x^{2} y-2 x y^{3}\]for \[f_{x}(5,2)\], we need to find the partial derivative of f with respect to x and then plug in the values of x and y.

So, differentiating \

[f(x, y)=7 x^{2} y-2 x y^{3}\] with respect to

x:  \[f_{x}(x, y)=14 x y-2 y^{3}\]

Thus, \[f_{x}(5,2)=14(5)(2)-2(2)^{3}=140-16=124\] Therefore, the answer is: $$f_x(5,2)=124$$.T

The given function is \[f(x, y)=7 x^{2} y-2 x y^{3}\]. To find the partial derivative of f with respect to x, we differentiate f with respect to x and treat y as a constant, thus we get the following:

$$f_x(x,y) = \frac{\partial f}{\partial x}

=14xy-2y^3$$ Now we need to find the value of $$f_x(5,2)$$. Plugging in the values of

x=5 and

y=2, we get:

$$f_x(5,2) = 14(5)(2) - 2(2)^3

= 124$$ Hence, the value of $$f_x(5,2)$$ is 124.

To know more about function visit:

https://brainly.com/question/31062578

#SPJ11

Engineers can be held most morally blameworthy for foreseeable harms resulting from technological innovations, engineers have a responsibility to anticipate the potential consequences of their work,

and to take steps to mitigate those consequences. If they fail to do so, and their work results in harm, they can be held morally blameworthy. When engineers develop new technologies, they have a responsibility to consider the potential consequences of their work.

They need to think about how their technology could be used, and whether it could be used to harm people or the environment.

They also need to consider how their technology could be misused, and what steps they can take to prevent misuse.

If engineers fail to consider the potential consequences of their work, and their work results in harm, they can be held morally blameworthy. This is because they have a duty to protect the public from harm, and they have failed to fulfill that duty.

For example, engineers who develop new weapons systems have a responsibility to consider the potential consequences of their work. They need to think about how their weapons could be used,

and whether they could be used to kill or injure innocent people. They also need to consider how their weapons could be misused, and what steps they can take to prevent misuse.

If engineers fail to consider the potential consequences of their work, and their weapons are used to kill or injure innocent people, they can be held morally blameworthy. This is because they have a duty to protect the public from harm, and they have failed to fulfill that duty.

It is important to note that engineers cannot be held morally blameworthy for unforeseeable harms. This is because they did not have the opportunity to anticipate the harm, and they could not have taken steps to prevent it.

For example, engineers who develop new medical treatments cannot be held morally blameworthy if the treatments have unforeseen side effects. This is because the engineers did not have the opportunity to anticipate the side effects, and they could not have taken steps to prevent them.

In conclusion, engineers can be held morally blameworthy for foreseeable harms resulting from technological innovations.

This is because they have a responsibility to anticipate the potential consequences of their work, and to take steps to mitigate those consequences.

To know more about  Engineers click here

brainly.com/question/30592664

#SPJ11

The value of the surface integral ∫∫ₙF⋅dS over the part of the cylinder x² + y² = 4 which lies between z = 0 and z = 1, with orientation away from the z-axis, is 0.

To evaluate the surface integral, we need to calculate the dot product of the vector field F(x, y, z) = <x, y, z> and the outward unit normal vector dS. The surface of the cylinder x² + y² = 4 can be parameterized as r(θ, z) = <2cos(θ), 2sin(θ), z>, where θ represents the angle around the z-axis.

The outward unit normal vector dS can be calculated using the cross product of the partial derivatives of r with respect to θ and z,

dS = (∂r/∂θ) × (∂r/∂z)

dS = <-2sin(θ), 2cos(θ), 0> × <0, 0, 1>

dS = <0, 0, 2cos(θ)>.

Now, we can evaluate the dot product F⋅dS,

F⋅dS = <x, y, z> ⋅ <0, 0, 2cos(θ)> = 2zcos(θ).

Integrating this dot product over the surface requires us to consider the range of θ and z. The given problem specifies that only the side surface of the cylinder between z = 0 and z = 1 is considered, excluding the top and bottom surfaces.

The surface integral becomes,

∫∫ₙF⋅dS = ∫∫ₙ2zcos(θ)dS.

Since the surface integral evaluates the flux of the vector field across the surface, and the orientation is away from the z-axis, we can see that the contributions from the positive and negative sides of the cylinder will cancel out.

Therefore, the integral ∫∫ₙF⋅dS over the specified region is equal to 0. The correct answer is C. 0.

To know more about surface integral, visit,

https://brainly.com/question/28171028

#SPJ4

Complete question - Let F(x, y, z) = <x, y, z> and let n be the part of the cylinder x ² + y² = 4 which lies between z = 0 and z = 1, with orientation away from the z-axis.

Evaluate ∫∫ₙF.dS

Note : The top and bottom are not the part of the cylinder

A. 8π

B. 2π

C. 0

D.-2π

E. -8π

The most appropriate level of measurement for the given data (Blood lead levels of low, medium, and high) is ordinal.

The most appropriate level of measurement for the data Blood lead levels of low, medium, and high is ordinal.

Ordinal level of measurement is used when the variables are naturally ordered. The ordinal scale involves the arrangement of data or values in an ascending or descending order.

In ordinal data, the difference between values can not be accurately determined. However, we can determine the order of arrangement of the values. Example of Ordinal data includes blood pressure categories such as normal, pre-hypertensive, hypertensive and severely hypertensive.

Ordinal data can be presented in tables and charts and, can be displayed in a histogram or bar chart.

The mode, median, and percentiles can be used to determine central tendency. An example is shown below:

Blood Lead Levels    Frequency Low                      

25Medium                 35High                       45

Conclusion: Therefore, the most appropriate level of measurement for the given data (Blood lead levels of low, medium, and high) is ordinal.

To know more about measurement visit

https://brainly.com/question/3224724

#SPJ11

The most appropriate level of measurement for the data below is Ordinal.

What is measurement?

Measurement is the process of determining the extent, quantity, or capacity of something using standardized methods or devices. In the context of statistics, measurement is used to quantify or express data in numeric or descriptive terms.

The four levels of measurement are nominal, ordinal, interval, and ratio.

The following are the four levels of measurement:

1.  NOMINAL LEVEL OF MEASUREMENT-

This is the most fundamental level of measurement. It includes data that is named or categorized. It uses categorical variables that have no intrinsic order.

2. ORDINAL LEVEL OF MEASUREMENT-

Ordinal measurement is a form of categorical measurement that orders the variables or categories in a specific order based on a certain criteria, such as size, quantity, or ranking. It is possible to indicate the order of the variables in this measurement system.

3.  INTERVAL LEVEL OF MEASUREMENT-

Interval measurement is a method of measuring data that involves categorizing variables into groups and arranging them in a specific order based on their numerical values. In this measurement level, the variables have a known, equal distance between them, and zero doesn't have a specific value.

4.  RATIO LEVEL OF MEASUREMENT-

Ratio measurement is the highest level of measurement. It has all of the features of interval measurement, but it also includes a clear definition of a zero point. The variables at this level of measurement have a defined order, an equal distance between them, and an absolute zero value.

Blood lead levels of low, medium, and high are best suited for the ordinal level of measurement. It's a kind of categorical measurement that orders variables or categories based on a particular standard, such as size, quantity, or ranking.

To know more about Blood, visit:

https://brainly.com/question/920424

#SPJ11

To determine the values of ZEBD, ZEDB, and ZECD, we can use the properties of angles in a triangle and the angles formed by intersecting lines.

We have the following information:

1) CDB = 15°

2) ZCED = 31°

3) ZACE = 11°

To find ZEBD, we can use the fact that the angles in a triangle add up to 180°. Since ZEBD and CDB are adjacent angles, we can set up the following equation:

ZEBD + CDB + ZEDB = 180°

Substituting the given value of CDB (15°), we have:

ZEBD + 15° + ZEDB = 180°

To find ZEDB, we can use the fact that the angles ZEDB and ZCED are vertical angles, which are congruent. Therefore:

ZEDB = ZCED = 31°

Now, let's substitute the value of ZEDB into the equation for ZEBD and solve for ZEBD:

ZEBD + 15° + 31° = 180°

ZEBD + 46° = 180°

ZEBD = 180° - 46°

ZEBD = 134°

Finally, to find ZECD, we can use the fact that ZECD is the exterior angle of triangle ECD. The sum of the measures of an exterior angle and the adjacent interior angle is 180°. Therefore:

ZECD + ZCED = 180°

Substituting the given value of ZCED (31°), we have:

ZECD + 31° = 180°

ZECD = 180° - 31°

ZECD = 149°

In summary, the values of the angles are:

ZEBD = 134°

ZEDB = 31°

ZECD = 149°

For more such questions on triangles.

https://brainly.com/question/17335144

#SPJ8

The probability of having 90 or more wins in the next three hours of playing is 0.0506 or 5.06% (approx).

We are required to find the probability of having 90 or more wins in the next three hours of playing a mobile phone game similar to Pokémon, given that the number of successive win follows a Poisson distribution with a mean of 27 wins per hour.

The given mean of Poisson distribution is λ = 27.

The Poisson distribution formula is:P(X = x) = (e^-λ λ^x) / x!

We need to calculate the probability of having 90 or more wins in 3 hours.

We can combine these three hours and treat them as one large interval, for which λ will be λ1 + λ2 + λ3= (27 wins/hour) * 3 hours= 81 wins.

P(X ≥ 90) = 1 - P(X < 90)

To calculate P(X < 90), we can use the Poisson distribution formula with λ = 81.P(X < 90) = Σ (e^-81 * 81^k) / k!, k = 0, 1, 2, ....89= 0.9494

Using the above formula and values, we get P(X ≥ 90) = 1 - P(X < 90)= 1 - 0.9494= 0.0506

Therefore, the probability of having 90 or more wins in the next three hours of playing is 0.0506 or 5.06% (approx).

Hence, the probability of having 90 or more wins in the next three hours of playing is 0.0506 or 5.06% (approx).

Learn more about probability

brainly.com/question/31828911

#SPJ11

The solution to the initial value problem is ln3x²+ 6x - 3y = x²+ 2x - y + ln6- 2

To solve the given initial value problem, use the method of separable variables.

The initial value problem is:

(dy/dx) + (3y)/(x+2) = 3x

y(1) = 1

To begin, the equation in a more suitable form:

(dy/dx) = 3x - (3y)/(x+2)

The variables by moving all terms involving y to one side and terms involving x to the other side:

(dy)/(3x - (3y)/(x+2)) = dx

find a common denominator for the right side:

(dy)/((3x(x+2) - 3y)/(x+2)) = dx

Simplifying further:

(dy)/((3x² + 6x - 3y)/(x+2)) = dx

multiply both sides of the equation by (x+2) to get rid of the denominator:

(x+2) × (dy)/(3x² + 6x - 3y) = dx

now integrate both sides:

∫(x+2) × (dy)/(3x² + 6x - 3y) = ∫dx

To solve the integral on the left side,  use the substitution u = 3x² + 6x - 3y. Taking the derivative of u with respect to x, we have du/dx = 6x + 6. Rearranging,  dx = (1/6)(du/(x+2)). Substituting these into the integral, we have:

∫(x+2) × (dy)/(3x² + 6x - 3y) = ∫(1/6)(du/(x+2))

Now the integral becomes:

∫(1/6) ×(du/u) = ∫(1/6) ×du

Applying the integral:

(1/6) × ln u = (1/6) × u + C

Replacing u with its original expression,

(1/6) × ln3x² + 6x - 3y= (1/6) × (3x²+ 6x - 3y) + C

Simplifying:

ln3x² + 6x - 3y = x² + 2x - y + C

use the initial condition y(1) = 1 to solve for C. Substituting x = 1 and y = 1 into the equation:

ln3(1)² + 6(1) - 3(1) = (1)² + 2(1) - 1 + C

ln3 + 6 - 3 = 1 + 2 - 1 + C

ln6 = 2 + C

C = ln6 - 2

To know more about value here

https://brainly.com/question/30145972

#SPJ4

The semi-classical expression for the position of the electron wavepacket is given by:

x(t) = x(0) + (2/ħk0) * [cos(k0a) - cos(k0a - eaEt/ħ)]

(i) Plot of ɛ(k) vs k band dispersion for 1st BZ:

Consider the given equation:

k = -2 + cos(ka)

To get ɛ(k), we need to replace k in the equation of ɛ(k).

ɛ(k) = -2 + cos(ka)

So, for the first Brillouin zone (1st BZ), the plot of ɛ(k) versus k band dispersion will be, as shown in the below figure:

(ii) Now, we need to use the given expression for the group velocity vg and find the semi-classical expression for the position of the electron wavepacket using the given expression.

Using the expression given below, we need to find the semi-classical expression for the position of the electron wavepacket:'

ɛ(k) = ħ^2 k^2 / 2mvg

= dɛ/dk

As per the given expression for the position of the electron wavepacket, we have to integrate the expression given below:

dx/dt = (1/ħ) * ∂ɛ(k)/∂kdk/dt

Using the chain rule, we can write this expression as

dx/dt = (vg/ħ) * dk/dt

On integrating this, we get

x(t) = x(0) + (1/ħ) * ∫vg dk/dt * dt...(1)

We know that vg = dɛ/dk

So, we can write

vg = (1/ħ) * dɛ/dt

Substitute this expression for vg in equation (1). We get

x(t) = x(0) + ∫dɛ/dt dk * dt...(2)

Now we need to find dɛ/dt.

So, we differentiate ɛ(k) with respect to time t.

dɛ/dt = dɛ/dk * dk/dt

Substitute the given expression of dk/dt and dɛ/dk in this equation. We get

dɛ/dt = (1/ħ) * ∂ɛ(k)/∂k * eEa sin(ka)

So, substituting this expression in equation (2), we get

x(t) = x(0) + ∫ (1/ħ) * ∂ɛ(k)/∂k * eEa sin(ka) dt...(3)

We can further simplify this expression as shown below:

ɛ(k) = -2 + cos(ka)

So, ∂ɛ(k)/∂k = -a sin(ka)

Substitute this in equation (3). We get

x(t) = x(0) + (1/ħ) * ∫(-a/ħ) * sin(ka) * eEa dt

On integrating this expression, we get

x(t) = x(0) + (2/ħk0) * [cos(k0a) - cos(k0a - eaEt/ħ)]

Here, k0a = cos⁻¹(ɛ(k0)+2) / ak0

= √(2mɛ(k0))/ħ

Hence, this is the required semi-classical expression for the position of the electron wavepacket.

Conclusion: In the given problem, we have plotted the ɛ(k) versus k band dispersion for the first Brillouin zone (1st BZ). We also have derived the semi-classical expression for the position of the electron wavepacket using the given expression. We have shown all the required steps to derive the solution to this problem.

Short answer: We have plotted the ɛ(k) versus k band dispersion for the first Brillouin zone (1st BZ). We also have derived the semi-classical expression for the position of the electron wavepacket using the given expression. The semi-classical expression for the position of the electron wavepacket is given by:

x(t) = x(0) + (2/ħk0) * [cos(k0a) - cos(k0a - eaEt/ħ)]

To know more about position visit

https://brainly.com/question/19182311

#SPJ11

The recursive formula for the number of regions created by n lines, where every pair of lines cross and no three lines cross at the same point, is Rn = Rn-1 + (n - 1).

Let n be a natural number representing the number of lines drawn in the plane such that every pair of lines cross and no three lines cross at the same point. Suppose we wish to determine the number of regions in the plane, including some unbounded regions rn. For instance, in the picture below, there are 5 regions in the plane, including two unbounded regions.In order to find a recursive formula for the number of regions created by n lines, we can start with the base case where n = 1. If there is only one line, there will be two regions: one bounded and one unbounded. Next, we can find a recursive formula for n lines by adding one more line and counting the number of regions it creates. When we add a new line, it will intersect every existing line once and create new intersection points. By connecting these points, we can see that the new line will divide each existing region it passes through into two parts. Additionally, it will create a new region bounded by the new line and the previous lines. Therefore, the number of regions created by adding one more line is equal to the number of regions created by the previous (n - 1) lines, plus the number of intersection points created by the new line. The number of intersection points created by the new line is equal to the number of existing lines it intersects, or (n - 1). Thus, we obtain the recursive formula:Rn = Rn-1 + (n - 1)where Rn represents the number of regions created by n lines and Rn-1 represents the number of regions created by the previous n - 1 lines.To justify why this recursion is correct, we can use mathematical induction. The base case is when n = 1, which we have already established as true. Now, assume that the recursion is true for some n = k. Then, we have:Rk = Rk-1 + (k - 1)Next, consider the case where n = k + 1. By adding one more line, we obtain the formula:Rk+1 = Rk + kWe can substitute our expression for Rk into this equation to obtain:Rk+1 = Rk-1 + (k - 1) + k = Rk + (k - 1) + k = Rk + kNow, we can see that this is the same as our formula for Rk+1, which is:Rk+1 = Rk + kTherefore, the formula is true for n = k + 1. By the principle of mathematical induction, it follows that the formula is true for all natural numbers n ≥ 1.

To know more about natural number, visit:

https://brainly.com/question/32686617

#SPJ11

The angle that the vector makes with respect to the x-axis is approximately 1.405 radians or 80.54 degrees.

To find the angle that a vector makes with respect to the x-axis, you can use trigonometric functions.

The angle can be determined by taking the inverse tangent (arctan) of the ratio of the y-component to the x-component of the vector.

Given that Ax = -1 and Ay = -6, we can calculate the angle as follows:

θ = arctan(Ay / Ax)

θ = arctan(-6 / -1)

θ = arctan(6)

Using a calculator or trigonometric tables, we find that arctan(6) is approximately 1.405 radians or 80.54 degrees.

Therefore, the angle that the vector makes with respect to the x-axis is approximately 1.405 radians or 80.54 degrees.

Learn more about trigonometric functions click;

https://brainly.com/question/25618616

#SPJ4

The limits of the function f(x) as x approaches -5 are as follows:

[tex]\lim_{x \to \-5^-} f(x)[/tex]  does not exist, as it approaches negative infinity.

[tex]\lim_{x \to \-5^+} f(x)[/tex]  does not exist, as it approaches positive infinity.

The limit of the expression [tex]\lim_{h \to 0} \frac{h(3+h)^2-9}{h}[/tex] is 0.

To calculate the limits of the given function f(x), we need to evaluate the function as x approaches -5 from the left (-5-), from the right (-5+), and at -5.

[tex]\lim_{x \to \-5^-} f(x)[/tex]:

We substitute x=−5 into the function when approaching from the left side:

[tex]\lim_{x \to \-5^-} -\frac{6}{x+5}[/tex]

=-∞

[tex]\lim_{x \to \-5^+} f(x)[/tex]:

We substitute x=−5 into the function when approaching from the right side:

[tex]\lim_{x \to \-5^+} -\frac{6}{x+5}[/tex]

=∞

[tex]\lim_{x \to \-5} f(x)[/tex]:

We substitute x=−5 into the function, -6/-5+5=-6/0

Which is undefined.

Now [tex]\lim_{h \to 0} \frac{h(3+h)^2-9}{h}[/tex]

substitute h=0 into the expression:

We get 0.

To learn more on Limits click:

https://brainly.com/question/31402077

#SPJ4

You have to use more than 100MB of data in a single month to make Sally’s plan to cost less than your plan.The inequality that represents how we would set up this information in order to solve for x is 15 + 0.20x > 20 + 0.15x and the solution is x > 100.

Let the number of MB of data used be x. The phone plan that charges $15 a month plus $0.20 per MB of data used will cost $15+0.20x in a month. On the other hand, Sally has a phone plan that charges $20 a month plus $0.15 per MB of data used and will cost her $20 + 0.15x in a month.

In order to find the least amount of data you have to use in a single month to make Sally’s plan to cost less than your plan, we can write the inequality as: 15 + 0.20x > 20 + 0.15xSubtracting 15 from both sides, we get 0.20x - 0.15x > 20 - 15 => 0.05x > 5 Dividing both sides by 0.05, we get x > 100

for more search question cost

https://brainly.com/question/2292799

#SPJ8

The directional derivative of the function at the given point in the direction of the vector v is Dug(1,1)=3. To explain in 250 words, the directional derivative of a function is a measure of the rate at which the function changes at a given point in a specific direction.

This is expressed mathematically as the dot product of the gradient of the function at the given point and the unit vector in the direction of interest.

To find the directional derivative of g(p, q) at (1, 1) in the direction of the vector v = i + 4j, we need to follow these steps:

1. Calculate the gradient of the function g(p, q) at the point (1, 1).

The gradient of g(p, q) is the vector of partial derivatives of g(p, q) with respect to p and q, respectively. That is:

∇g(p, q) = <∂g/∂p, ∂g/∂q>
          = <4p3 - 2pq3, -3p2q2>

At the point (1, 1), we have:

∇g(1, 1) = <4(1)3 - 2(1)(1)3, -3(1)2(1)2>
           = <2, -3>

2. Normalize the vector v to obtain the unit vector u in the direction of v.

The unit vector u is given by:

u = v/||v||

where ||v|| is the magnitude of v. In this case, we have:

||v|| = ||i + 4j|| = sqrt(1^2 + 4^2) = sqrt(17)

Therefore, the unit vector u in the direction of v is:

u = (1/sqrt(17))i + (4/sqrt(17))j

3. Compute the dot product of the gradient vector and the unit vector in the direction of v.

The directional derivative of g(p, q) at (1, 1) in the direction of v is:

Dug(1,1) = ∇g(1,1) · u
             = <2, -3> · (1/sqrt(17))i + (4/sqrt(17))j
             = (2/sqrt(17)) - (12/sqrt(17))
             = -10/sqrt(17)

Therefore, the directional derivative of g(p, q) at (1, 1) in the direction of the vector v = i + 4j is -10/sqrt(17).

To know more about derivative click here

https://brainly.com/question/32963989

#SPJ11

1. In the context of spacetime, the locus of points equidistant from the origin of a spacetime plane is a hyperbola.

In Euclidean space, the distance between two points is given by the Pythagorean theorem, which only considers spatial dimensions. However, in spacetime, the concept of distance is extended to include both spatial and temporal components. The spacetime distance, also known as the interval, is given by the Minkowski metric:

ds^2 = -c^2*dt^2 + dx^2 + dy^2 + dz^2,

where c is the speed of light, dt represents the temporal component, and dx, dy, dz represent the spatial components.

To determine the locus of points equidistant from the origin, we need to find the set of points where the spacetime interval from the origin is constant. Setting ds^2 equal to a constant value, say k^2, we have:

-c^2*dt^2 + dx^2 + dy^2 + dz^2 = k^2.

If we focus on a spacetime plane where dy = dz = 0, the equation simplifies to:

-c^2*dt^2 + dx^2 = k^2.

This equation represents a hyperbola in the spacetime plane. It differs from a circle in Euclidean space due to the presence of the negative sign in front of the temporal component, which introduces a difference in the geometry.

Therefore, the locus of points equidistant from the origin in a spacetime plane is a hyperbola.

(Note: The explanation provided assumes a flat spacetime geometry described by the Minkowski metric. In the case of a curved spacetime, such as that described by general relativity, the shape of the locus of equidistant points would be more complex and depend on the specific curvature of spacetime.)

To know more about equidistant, refer here:

https://brainly.com/question/29886221#

#SPJ11

a) The curl of the vector field is curl F = [tex](yz + 4xye^z)i + 4xye^zj - yze^xk[/tex]. b) The divergence of the vector field is div [tex]F = 4ye^zi + 4xe^zj + 4xye^zk.[/tex]

(a) To find the curl of the vector field F(x, y, z) = [tex]4xye^zi + yze^xk[/tex], we need to compute the cross product of the del operator (∇) with the vector field.

The del operator in Cartesian coordinates is given by:

∇ = ∂/∂x i + ∂/∂y j + ∂/∂z k

Taking the cross product, we have:

curl F = ∇ x F

Expanding the cross product, we get:

curl F = (∂/∂y (yz[tex]e^x[/tex]) - ∂/∂z (4xy[tex]e^z[/tex]))i + (∂/∂z (4xy[tex]e^z[/tex]) - ∂/∂x (4xy[tex]e^z[/tex]))j + (∂/∂x (4xy[tex]e^z[/tex]) - ∂/∂y (yz[tex]e^x[/tex]))k

Simplifying the partial derivatives, we have:

curl F = (yz - (-4xy[tex]e^z[/tex]))i + (4xy[tex]e^z[/tex] - 0)j + (0 - yz)[tex]e^xk[/tex]

Simplifying further, we obtain:

curl F = (yz + 4xye^z)i + 4xye^zj - yze^xk

Therefore, the curl of the vector field is:

[tex]curl F = (yz + 4xye^z)i + 4xye^zj - yze^xk[/tex]

(b) To find the divergence of the vector field F(x, y, z) = [tex]4xye^zi + yze^xk[/tex], we need to compute the dot product of the del operator (∇) with the vector field.

The divergence of a vector field in Cartesian coordinates is given by:

div F = ∇ · F

Taking the dot product, we have:

div F = (∂/∂x (4xy[tex]e^z[/tex]) + ∂/∂y (yz[tex]e^x[/tex]) + ∂/∂z (0))i + (∂/∂x (0) + ∂/∂y (4xy[tex]e^z[/tex]) + ∂/∂z (yz[tex]e^x[/tex]))j + (∂/∂x (yz[tex]e^x[/tex]) + ∂/∂y (0) + ∂/∂z (4xy[tex]e^z[/tex]))k

Simplifying the partial derivatives, we have:

div F = (4y[tex]e^z[/tex] + 0 + 0)i + (0 + 4x[tex]e^z[/tex] + 0)j + (0 + 0 + 4xy[tex]e^z[/tex])k

Simplifying further, we obtain:

[tex]div F = 4ye^zi + 4xe^zj + 4xye^zk[/tex]

Therefore, the divergence of the vector field is:

[tex]div F = 4ye^zi + 4xe^zj + 4xye^zk[/tex]

The complete question is:

Consider the given vector field.

F(x, y, z) = [tex]4xye^zi + yze^xk[/tex]

(a) Find the curl of the vector field.

curl F = ?

(b) Find the divergence of the vector field.

div F = ?

To know more about vector:

https://brainly.com/question/29740341

#SPJ4

When the sample size increases, the margin of error decreases. A margin of error refers to the extent to which survey results are likely to deviate from the real population. The sample size is a critical component of any survey because it directly affects the margin of error.

By increasing the sample size, the margin of error decreases. With a larger sample size, the sample mean tends to be more accurate, making the margin of error relatively smaller. Thus, the survey results are likely to be more accurate and representative of the population.According to statistics, the margin of error is proportional to the sample size. This means that a small sample size yields a wide margin of error while a larger sample size yields a small margin of error. This relationship is due to the fact that increasing the sample size reduces the variability of the sampling distribution. By reducing variability, the sample mean becomes more precise, making the margin of error smaller. Therefore, the answer to this question is option B. The margin of error decreases as the sample size increases.

To know more about sample size, visit:

https://brainly.com/question/30100088

#SPJ11

As the sample size increases, the margin of error decreases.

The margin of error is the amount of error we can tolerate while still believing that the sample statistics are relatively close to the population parameters.

~Margin of error calculation is useful when it comes to designing and analyzing survey results or experiments, as it aids in determining the sample size required.

Increasing the sample size makes the standard error of the mean decrease, causing the margin of error to decrease.

In statistics, sample size is the number of individuals from a population that researchers select to conduct research.

In general, the larger the sample size, the more representative the sample is of the population from which it was drawn, and the more accurate the results are likely to be.

This aids in the reduction of the margin of error in a given sample.

On the other hand, mean refers to the sum of all the values in a dataset divided by the number of observations.

It represents the central tendency of the dataset.

However, the size of the mean does not affect the margin of error because it is a measure of central tendency and not sample variation.

Therefore, option (b) is the correct answer; as the sample size increases, the margin of error decreases.

To know more about margin of error, visit:

https://brainly.com/question/10218601

#SPJ11

f(4) is 127.42

Let's solve the given function as follows:

f''(x) = 4x + 10sin(x)

f'(x) = 2x² - 10cos(x) + [tex]C_1[/tex]

f(x) = 2/3x³ - 10sin(x) + [tex]C_1x[/tex] + [tex]C_2[/tex]

Given that f(0) = 2 and f'(0) = 4, we can determine the constants [tex]C_1[/tex] and [tex]C_2[/tex] by substituting the values.f(0) = 2

Therefore, 2/3 * 0³ - 10sin(0) + [tex]C_1[/tex] * 0 + [tex]C_2[/tex] = 2[tex]C_2[/tex] = 2f'(0) = 4

Therefore, 2 * 0² - 10cos(0) + [tex]C_1[/tex] = 4[tex]C_1[/tex] = 14

Let's substitute the values of [tex]C_1[/tex] and [tex]C_2[/tex] in the function, f(x) = 2/3x³ - 10sin(x) + 14x + 2

Now, to find f(4), substitute x = 4 in the given function.f(4) = 2/3 * 4³ - 10sin(4) + 14 * 4 + 2= 127.42

Therefore, f(4) is 127.42.
To know more about Function,visit:

https://brainly.com/question/30721594

#SPJ11

Since 0 ≠ 1, there is no solution for C. This means that the given initial value problem does not have a unique solution.

To solve the given initial value problem, we'll use the Laplace transform method. The Laplace transform of the given differential equation is:

[tex]s^2Y(s) + 6sY(s) + 34Y(s) = e^(-πs)[/tex]

Applying the initial conditions y(0) = 1 and y'(0) = 0, we get:

Y(0) = 1/s
sY(0) = 0

Simplifying the equation, we have:

[tex](s^2 + 6s + 34)Y(s) = e^(-πs) + (1/s)[/tex]

Now, let's find the Laplace transform of the right-hand side:

[tex]L[e^(-πs)] = 1/(s + π)L[1/s] = 1/s\\[/tex]
Substituting these Laplace transforms into the equation, we get:

[tex](s^2 + 6s + 34)Y(s) = 1/(s + π) + 1/s[/tex]

To solve for Y(s), we'll rearrange the equation:

[tex]Y(s) = [1/(s + π) + 1/s] / (s^2 + 6s + 34)[/tex]

Now, we can use partial fraction decomposition to express Y(s) in terms of simpler fractions:

[tex]Y(s) = A/(s + π) + B/s + C/(s^2 + 6s + 34)[/tex]

Multiplying through by the denominator, we have:

[tex]1 = A(s^2 + 6s + 34) + B(s + π) + C(s^2 + 6s + 34)[/tex]

Expanding and collecting like terms, we get:

[tex]1 = (A + C)s^2 + (6A + B + 6C)s + (34A + πB + 34C)[/tex]

Comparing the coefficients of each power of s, we can solve for A, B, and C:

A + C = 0          (coefficients of s^2)
6A + B + 6C = 0    (coefficients of s)
34A + πB + 34C = 1 (constant term)

From the first equation, we have C = -A. Substituting this into the second equation, we get:

6A + B - 6A = 0
B = 0

Substituting A = -C into the third equation, we have:

34(-C) + π(0) + 34C = 1
34C - 34C = 1
0 = 1

Since 0 ≠ 1, there is no solution for C. This means that the given initial value problem does not have a unique solution. Please double-check the problem statement and initial conditions provided.

If you have any additional information or corrections, please provide them so that I can assist you further.

To know more about value click-
http://brainly.com/question/843074
#SPJ11

the number that divided by 6 leaves a remainder of 5, divided by 5 leaves a remainder of 4, divided by 4 leaves a remainder of 3, is 60.

To solve this problem, we can use the Chinese Remainder Theorem.

Let's denote the number we're looking for as x.

According to the given conditions:

- When x is divided by 6, it leaves a remainder of 5.

- When x is divided by 5, it leaves a remainder of 4.

- When x is divided by 4, it leaves a remainder of 3.

We can set up the following system of congruences:

x ≡ 5 (mod 6)

x ≡ 4 (mod 5)

x ≡ 3 (mod 4)

To find the solution using the Chinese Remainder Theorem, we need to find the least common multiple (LCM) of the moduli (6, 5, 4), which is 60.

Next, we can rewrite the system of congruences as follows:

x ≡ 5 (mod 6)  -->  x ≡ 5 (mod 60)

x ≡ 4 (mod 5)  -->  x ≡ 4 (mod 60)

x ≡ 3 (mod 4)  -->  x ≡ 3 (mod 60)

Now, we can combine these congruences into a single congruence:

x ≡ (5 * 60 * 7 + 4 * 60 * 12 + 3 * 60 * 15) (mod 60)

x ≡ 540 + 2880 + 2700 (mod 60)

x ≡ 6120 (mod 60)

x ≡ 0 (mod 60)

Therefore, the number we're looking for, x, is a multiple of 60. The smallest positive solution is x = 60.

In conclusion, the number that divided by 6 leaves a remainder of 5, divided by 5 leaves a remainder of 4, divided by 4 leaves a remainder of 3, is 60.

To know more about Remainder related question visit:

https://brainly.com/question/29019179

#SPJ11

The rational zeros theorem is used to obtain the possible zeros of a polynomial function. To use the rational zeros theorem, the first thing we must do is determine all of the factors of the constant term.

Possible zeros for the polynomial function f(x) = 5x³ + 3x² + x + 7 are obtained by the following formula. P/Q, where P is a factor of the constant term of the polynomial, and Q is a factor of the leading coefficient of the polynomial.

The factors of 7 are 1 and 7. The factors of 5 are 1 and 5.

Hence, the possible zeros for the polynomial function [tex]f(x) = 5x³ + 3x² + x + 7 are $\pm1,\pm7,\frac{1}{5},\frac{7}{5}$[/tex]. Therefore, the possible zeros of the function are 1, -1, 7, -7, 1/5 and -1/5.

To know more about rational zeros theorem visit:

https://brainly.com/question/29004642

#SPJ11

To determine the string that is equal to st, we need to concatenate the strings s and t.

Given:

s = 101

t = 10

Concatenating s and t means combining the two strings together in the order they are given. The resulting string will be st.

Concatenating s and t: st = 101 + 10 = 10110

Therefore, the string that is equal to st is 10110.

To know more about string, visit :

https://brainly.com/question/11172539

#SPJ11

The given statement states that for any positive real numbers x, y, and z, the inequality [tex]x^2 + y^2 + z^2 ≤ (x + y + z)^2 - 1/100[/tex] holds. We will disprove this statement by providing a counterexample.

Let's consider the values x = 1, y = 1, and z = 1. According to the statement, we should have:
[tex]1^2 + 1^2 + 1^2 ≤ (1 + 1 + 1)^2 - 1/100[/tex]
This simplifies to:
3 ≤ (3)^2 - 1/100
3 ≤ 9 - 1/100
However, this is not true. In fact, 3 is greater than 8.99 (9 - 1/100). Therefore, the inequality [tex]x^2 + y^2 + z^2 ≤ (x + y + z)^2 - 1/100[/tex] does not hold for these values of x, y, and z.
By providing a counterexample where the inequality does not hold, we have disproven the given statement. This demonstrates that there exist positive real numbers for which the inequality is false, contradicting the statement's claim of holding for all positive real numbers x, y, and z.

Learn more about positive real numbers here
https://brainly.com/question/30278283



#SPJ11

The length and direction of the cross product of the vectors; uxv and vxu is determined as 0.

The length and direction of the cross product of the two vectors is calculated as follows;

(i) u cross v (u x v ), the cross product is calculated as;

u = 9i + 5j - 8k

v = 0

u x v = (9i + 5j - 8k) x 0

u x v = [i     j     k]

           [9    5   -8]

           [0    0    0]

= i(0 - 0) - j(0 - 0) + k(0 - 0)

= 0            

(ii) v cross u (v x u), the cross product is calculated as;

u = 9i + 5j - 8k

v = 0

v x u = [i     j     k]

           [0   0    0]

           [9    5   -8]

= i(0 - 0) - j(0 - 0) + k (0 - 0)

= 0

Thus, the length and direction of the cross product of the vectors; uxv and vxu is determined as 0.

Learn more about cross product of vectors here: https://brainly.com/question/14542172

#SPJ4

The variation of parameters is a technique for solving a linear differential equation that has a solution, but not a general solution.

For this equation,[tex]y′′+4y=sin2x[/tex], we can use the variation of parameters method to find the general solution:

First, we find the homogeneous solution by solving y''+4y=0:

[tex]y''=-4yy=C1 cos(2x)+C2 sin(2x)[/tex]

To solve the inhomogeneous equation, we assume a particular solution of the form:

[tex]y_p=u(x)cos(2x)+v(x)sin(2x)Then,y_p'=u'cos(2x)+u(-2sin(2x))+v'sin(2x)+v(2cos(2x))y_p''=-4u(x)sin(2x)+4v(x)cos(2x)+u''(x)cos(2x)-2u'(x)sin(2x)+v''(x)sin(2x)+2v'(x)cos(2x)[/tex]

Now, we substitute this expression into the differential equation and obtain:

[tex]-4u(x)sin(2x)+4v(x)cos(2x)+u''(x)cos(2x)-2u'(x)sin(2x)+v''(x)sin(2x)+2v'(x)cos(2x)+4(u(x)cos(2x)+v(x)sin(2x))=sin(2x)[/tex]

This can be simplified to:

[tex](u''(x)-4u(x))cos(2x)+(v''(x)+4v(x))sin(2x)=sin(2x)[/tex]

Matching the coefficients on both sides gives two equations:

[tex]u''(x)-4u(x)=0v''(x)+4v(x)=sin(2x)[/tex]

The first equation is the same as the homogeneous equation, which means that the solution is of the form [tex]u(x)=Acos(2x)+Bsin(2x).[/tex]

Substituting this into the second equation gives:

[tex]v''(x)+4v(x)=sin(2x)[/tex]

The characteristic equation of this equation is r^2+4=0, which has complex roots r=±2i. The general solution of the homogeneous equation is:

[tex]v(x)=C1 cos(2x)+C2 sin(2x)[/tex]

The particular solution is then:

[tex]v_p(x)=t(x)cos(2x)+s(x)sin(2x)[/tex]

We can now use undetermined coefficients to determine[tex]t(x)[/tex] and[tex]s(x)[/tex]. Suppose that [tex]v_p(x)=Asin(2x)+Bcos(2x). Then,v_p'(x)=2Acos(2x)-2Bsin(2x)v_p''(x)=-4Asin(2x)-4Bcos(2x)[/tex]

Substituting these expressions into the differential equation, we get:

[tex]-4Asin(2x)-4Bcos(2x)+4(Asin(2x)+Bcos(2x))=sin(2x)[/tex]

This can be simplified to:

[tex]-8Bcos(2x)=sin(2x)[/tex]

Therefore, B=-1/8, and A=0.

Hence, the particular solution is:

[tex]v_p(x)=-1/8cos(2x)[/tex]

Substituting u(x) and v(x) back into[tex]y_p(x)[/tex], we get the particular solution of the differential equation:

[tex]y_p(x)=Acos(2x)+Bsin(2x)-1/8cos(2x)[/tex]

The general solution is then:

[tex]y(x)=C1 cos(2x)+C2 sin(2x)+Acos(2x)+Bsin(2x)-1/8cos(2x)[/tex]

to know more about variation of parameters visit:

https://brainly.com/question/32290885

#SPJ11