Find the greatest common divisor of 6, 14, and 21, and write it in the form 6r 14s 21t, for appropriate r, s and t.

The quadratic function is -2x²+3x+-1=0

To find a quadratic function that includes the given set of values (1, 0), (2, -3), and (3, -10), we can start by using the general form of a quadratic function: f(x) = ax² + bx + c.

By substituting the x and y values of each point into the quadratic function, we can create a system of three equations.

For point (1, 0):

0 = a(1)² + b(1) + c

For point (2, -3):

-3 = a(2)² + b(2) + c

For point (3, -10):

-10 = a(3)² + b(3) + c

Simplifying the equations, we have:

Equation 1: a + b + c = 0

Equation 2: 4a + 2b + c = -3

Equation 3: 9a + 3b + c = -10

Up on solving the equations we get the values of a=-2,b=3,c=-1

so the quadratic function is -2x²+3x+-1=0

Learn more about Quadratic Function here:

brainly.com/question/18958913

#SPJ11

The given infinite series Σ[infinity]n=1(2/3)ⁿ converges with a sum of 2. The series converges due to the common ratio being less than 1 in a geometric series.

The series is a geometric series with a common ratio of 2/3.

In a geometric series, if the absolute value of the common ratio is less than 1, the series converges. In this case, 2/3 is less than 1, so the series converges.

The sum of a converging geometric series can be calculated using the formula S = a / (1 - r), where 'a' is the first term and 'r' is the common ratio.

Plugging in the values, we get S = (2/3) / (1 - 2/3) = 2. Therefore, the sum of the given series is 2.

Learn more about converges click here :brainly.com/question/17177764

#SPJ11

Taylor is 5 feet 8 inches tall.

Taylor's height from feet and inches to inches, we multiply the number of feet (5) by 12, since there are 12 inches in a foot, and then add the remaining inches (8). This gives us a total of 60 inches from the feet and an additional 8 inches, resulting in a final height of 68 inches. Therefore, Taylor is 68 inches tall.

The conversion process involves recognizing that each foot is equivalent to 12 inches. By multiplying the number of feet by 12 and adding the remaining inches, we can find the total height in inches. This method allows us to express Taylor's height in a consistent unit, facilitating easy comparison and measurement.

To learn more about height

brainly.com/question/29131380

#SPJ11

The basis vectors of the reciprocal lattice are:

b1 = π(x^z^)

b2 = π(z^x^)

b3 = π(y^x^)

To determine the basis vectors of the reciprocal lattice, we can use the relationship between the direct lattice and the reciprocal lattice. The reciprocal lattice vectors are defined as the inverse of the direct lattice vectors.

Given the direct lattice basis vectors:

a1 = 2x^

a2 = x^ + 2y^

a3 = z^

We can find the reciprocal lattice basis vectors using the following formula:

b1 = (2π/a) * (a2 x a3)

b2 = (2π/a) * (a3 x a1)

b3 = (2π/a) * (a1 x a2)

Where "x" denotes the cross product and "a" represents the volume of the unit cell defined by the direct lattice vectors.

Let's calculate the reciprocal lattice vectors:

b1 = (2π/(a1 · (a2 x a3))) * (a2 x a3)

= (2π/((2x^) · ((x^ + 2y^) x z^))) * ((x^ + 2y^) x z^)

= (2π/(2(x^ · (x^ x z^)) + (2y^ · (x^ x z^)))) * ((x^ + 2y^) x z^)

= (2π/(2(2y^) + (2x^))) * ((x^ + 2y^) x z^)

= (π/(y^ + x^)) * ((x^ + 2y^) x z^)

= π(x^z^ - y^z^)

b2 = (2π/(a2 · (a3 x a1))) * (a3 x a1)

= (2π/((x^ + 2y^) · (z^ x 2x^))) * (z^ x 2x^)

= (2π/((x^ + 2y^) · (-2y^x^))) * (z^ x 2x^)

= (2π/(2(x^ · (-2y^x^)) + (2y^ · (-2y^x^)))) * (z^ x 2x^)

= (2π/(2(-2z^) + 0)) * (z^ x 2x^)

= π(z^x^)

b3 = (2π/(a3 · (a1 x a2))) * (a1 x a2)

= (2π/(z^ · ((2x^) x (x^ + 2y^)))) * ((2x^) x (x^ + 2y^))

= (2π/(z^ · (2x^y^ - (x^x^ + x^y^ + 2y^x^ + 2y^y^))))) * ((2x^) x (x^ + 2y^))

= (2π/(z^ · (2x^y^ - (0 + x^y^ + 2y^x^ + 0))))) * ((2x^) x (x^ + 2y^))

= (2π/(z^ · (x^y^ - y^x^)))) * ((2x^) x (x^ + 2y^))

= (2π/(z^ · (-xz^ - 2yz^)))) * ((2x^) x (x^ + 2y^))

= π(y^x^)

Therefore, the basis vectors of the reciprocal lattice are:

b1 = π(x^z^)

b2 = π(z^x^)

b3 = π(y^x^)

Learn more about vector from

https://brainly.com/question/28028700

#SPJ11

The GCF of 15x² - 25x is 5x.

To find the greatest common factor (GCF) of the expression 15x² - 25x, we need to identify the largest common factor that can divide both terms.

Let's begin by factoring out any common factors from each term:

15x² = 5 * 3 * x * x

25x = 5 * 5 * x

Now, let's look for common factors in each term:

Common factors:

5: It appears in both terms.

x: It appears in both terms.

The GCF is the product of these common factors, which is 5 * x = 5x.

Therefore, the GCF of 15x² - 25x is 5x.

Learn more about GCF from

https://brainly.com/question/219464

#SPJ11

Answer: Im not very good at this but from what i do know, a shuold be inverses and b isnt. im probaly wrong so dont take my word for it

Step-by-step explanation:

The optima of the Lagrangian objective function is minimized at z = 54,000. Also the Lagrange multiplier solution corresponds to a minimum.

The optimal values for the Lagrangian objective function can be determined by solving the given optimization problem using Lagrange multipliers. We have the objective function z = 6x₁² + 12x₂² and the constraint g(x₁, x₂) = 90 = x₁ + x₂.

To find the optimal values, we form the Lagrangian function L(x₁, x₂, λ) = f(x₁, x₂) - λ(g(x₁, x₂) - 90). Here, λ is the Lagrange multiplier.

Taking the partial derivatives with respect to x₁, x₂, and λ, and setting them to zero, we obtain the following equations:

∂L/∂x₁ = 12x₁ - λ = 0

∂L/∂x₂ = 24x₂ - λ = 0

∂L/∂λ = x₁ + x₂ - 90 = 0

Solving these equations simultaneously, we find x₁ = 30, x₂ = 60, and λ = 360. Substituting these values back into the objective function, we get z = 6(30)² + 12(60)² = 54,000.

To determine whether this is a maximum or minimum, we can examine the second partial derivatives of the Lagrangian. Calculating the second partial derivatives, we have:

∂²L/∂x₁² = 12

∂²L/∂x₂² = 24

Since both second partial derivatives are positive, we can conclude that the Lagrange multiplier solution corresponds to a minimum. Therefore, the optima of the Lagrangian objective function is minimized at z = 54,000.

Learn more about Lagrangian here:

https://brainly.com/question/32584067

#SPJ11

The equation of the parabola with a vertex at (0,0) and a focus at (-7,0) is x^2 = 28y. The parabola opens upward.


In a parabola, the vertex is given by the coordinates (h, k), and the focus is given by the coordinates (h + p, k), where p represents the distance between the vertex and focus. In this case, the vertex is (0,0) and the focus is (-7,0).

The x-coordinate of the focus is 7 units to the left of the vertex, so p = -7. The equation for a parabola that opens upward is given by (x – h)^2 = 4p(y – k). Plugging in the values, we have (x – 0)^2 = 4(-7)(y – 0), which simplifies to x^2 = -28y. By multiplying both sides by -1, we get the standard form of the equation as x^2 = 28y. Thus, the equation of the parabola is x^2 = 28y, and it opens upward.

Learn more about Parabola here: brainly.com/question/11911877
#SPJ11

The relationship between lines πt and n is that they are both lines that lie in the intersection of planes P and Q.

Given that line m contains points D and F and does not intersect plane P, we can infer that line m lies entirely in plane Q.

Line n contains points A and E. Since point A lies in plane P and point E lies in plane Q, we can conclude that line n is the line of intersection between planes P and Q.

Therefore, the relationship between lines πt and n is that they are both lines that lie in the intersection of planes P and Q.

Lines πt and n are both lines that are part of the intersection between planes P and Q.

To know more about planes visit:

https://brainly.com/question/574548

#SPJ11

The drawing and similar triangles can be used to justify the statement that tan θ = sin θ / cos θ.

In the given drawing, consider a right triangle with an angle θ. The opposite side to angle θ is represented by sin θ, and the adjacent side is represented by cos θ. By the definition of tangent (tan θ), it is the ratio of the opposite side to the adjacent side in a right triangle. Since we have a right triangle, we can see that the ratio of sin θ (opposite side) to cos θ (adjacent side) is indeed the same as the ratio of the lengths of the sides in the similar triangles. This similarity arises because the angles in the right triangle and the similar triangles are congruent. Therefore, we can conclude that tan θ = sin θ / cos θ, as the tangent function represents the ratio of the opposite side to the adjacent side, which is equivalent to the ratio of sin θ to cos θ in the right triangle.

Learn more about ratio here: brainly.com/question/29774220

#SPJ11

The value of the first term of the series is 0.8.

To find the value of the first term of the arithmetic series, we need to use the formulas for the nth term and the sum of an arithmetic series.

Let's start by finding the common difference (d) of the arithmetic sequence. Since the 30th term is given as 4.4, we can use the formula for the nth term:

aₙ = a₁ + (n - 1)d

Substituting in the values, we have:

4.4 = a₁ + (30 - 1)d

4.4 = a₁ + 29d   ----(1)

Next, we can use the formula for the sum of the arithmetic series:

Sₙ = (n/2)(a₁ + aₙ)

Given that the sum of the first 30 terms is 78, we can substitute in the values:

78 = (30/2)(a₁ + 4.4)

78 = 15(a₁ + 4.4)

78 = 15a₁ + 66

Rearranging the equation:

15a₁ = 12

a₁ = 12/15

a₁ = 0.8

Therefore, the value of the first term of the series is 0.8.

learn more about series here

https://brainly.com/question/25277900

#SPJ11

To solve the equation cos(x) = -0.4, where 180º < x < 270º, we need to find the angle within the given restriction that has a cosine value of -0.4.

Since cosine is a periodic function, we can find the reference angle in the first quadrant and then determine the angle in the third quadrant that satisfies the given equation.

Step 1: Find the reference angle.

Using the inverse cosine function, we find the reference angle that has a cosine value of 0.4.

cos^(-1)(0.4) ≈ 66.42º

Step 2: Determine the angle in the third quadrant.

In the third quadrant, the cosine function is negative, so we take the supplementary angle of the reference angle:

180º - 66.42º ≈ 113.58º

Thus, the angle in the third quadrant that satisfies cos(x) = -0.4 is approximately 113.58º.

Note: The given restriction specifies that the angle must be between 180º and 270º, so the solution falls within this range.

To summarize, the solution to the equation cos(x) = -0.4, with the restriction 180º < x < 270º, is approximately x = 113.6º.

For more such questions on equation

https://brainly.com/question/17145398

#SPJ8

To solve the equation 6x + 5 + 2x - 11 = 90, the value of x can be found by simplifying the equation and solving for x. Hence solution to the equation 6x + 5 + 2x - 11 = 90 is x = 12.

Combining like terms, we have 8x - 6 = 90. To isolate the variable term, we can add 6 to both sides of the equation, resulting in 8x = 96. Finally, dividing both sides of the equation by 8 gives us the solution: x = 12.

In the given equation, we have a combination of variables (x) and constants (numbers). To solve the equation, our goal is to simplify it by combining like terms and isolating the variable term on one side of the equation.

Starting with 6x + 5 + 2x - 11 = 90, we can combine the x terms by adding 6x and 2x to get 8x. The equation becomes 8x + 5 - 11 = 90. Simplifying further, we have 8x - 6 = 90.

To isolate the variable term, we need to eliminate the constant term on the same side as the variable. In this case, we can subtract 6 from both sides of the equation, giving us 8x = 96.

Finally, to find the value of x, we divide both sides of the equation by the coefficient of x, which is 8. This gives us x = 12. Therefore, the solution to the equation 6x + 5 + 2x - 11 = 90 is x = 12.

Learn more about combination here: brainly.com/question/29595163

#SPJ11

The slope (m) of the line is 19 and the y-intercept (b) is -4. The equation of the line can be expressed as y = 19x - 4.

The slope (m) of a straight line can be calculated using the formula:

m = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are the coordinates of two points on the line.

Using the given points (3, 53) and (5, 91), we can substitute the values into the formula:

m = (91 - 53) / (5 - 3)

m = 38 / 2

m = 19

Therefore, the slope (m) of the straight line is 19.

To determine the y-intercept (b), we can use the slope-intercept form of a linear equation:

y = mx + b

where m is the slope and b is the y-intercept.

Using the point (3, 53) and the slope we just calculated (m = 19), we can substitute the values into the equation:

53 = 19(3) + b

53 = 57 + b

Now, solving for b:

b = 53 - 57

b = -4

Therefore, the y-intercept (b) of the straight line is -4.

Learn more about intercept here:
brainly.com/question/14180189

#SPJ11

Answer:The area of the triangle is a rational number, since both its base and its height are.

Step-by-step explanation:

Answer:

-2

Step-by-step explanation:

To find the slope of a linear function, we need to use the formula:

Slope = (change in y) / (change in x)

Looking at the table, we can see that when x increases by 1, y increases by -2. Therefore, the change in y is -2, and the change in x is 1.

Slope = (change in y) / (change in x)

Slope = 2/1

Slope = -2

Therefore, the slope of the function represented by the table is -2.

The least amount of money you can spend to buy the same number of candles and mints is $87.50 + $37.50 = $125.00.

To find the least amount of money you can spend to buy the same number of candles and mints, we need to determine the smallest common multiple of the number of candles in a pack and the number of mints in a pack.

The tea light candles come in packs of 12 for $3.50, and the mints come in packs of 50 for $6.25.

The prime factors of 12 are 2 * 2 * 3, and the prime factors of 50 are 2 * 5 * 5.

To find the least common multiple (LCM), we take the highest power of each prime factor that appears in either number:

LCM = 2 * 2 * 3 * 5 * 5 = 300

Therefore, the least amount of money you can spend to buy the same number of candles and mints is obtained by finding the cost of the LCM of the two quantities.

For the candles:

Cost of LCM = (LCM / 12) * $3.50 = (300 / 12) * $3.50 = 25 * $3.50 = $87.50

For the mints:

Cost of LCM = (LCM / 50) * $6.25 = (300 / 50) * $6.25 = 6 * $6.25 = $37.50

Therefore, the least amount of money you can spend to buy the same number of candles and mints is $87.50 + $37.50 = $125.00.

Learn more about money here

https://brainly.com/question/24373500

#SPJ11

The range for the measure of the third side of a triangle, given the measures of two sides (3.2 cm and 4.4 cm), is 1.2 cm < c < 7.6 cm.

To determine the range, we can apply the triangle inequality theorem, which states that the sum of the lengths of any two sides of a triangle must be greater than the length of the third side. Mathematically, for a triangle with sides a, b, and c, this can be expressed as:

a + b > c

Let's substitute the given side lengths into this inequality:

3.2 cm + 4.4 cm > c

7.6 cm > c

This inequality tells us that the length of the third side (c) must be less than 7.6 cm in order for a triangle to be formed.

On the other hand, we need to consider the minimum length for the third side. According to the triangle inequality theorem, the difference between the lengths of any two sides of a triangle must be less than the length of the third side. Mathematically, for sides a, b, and c, this can be expressed as:

|a - b| < c

Let's substitute the given side lengths into this inequality:

|3.2 cm - 4.4 cm| < c

|-1.2 cm| < c

1.2 cm < c

This inequality tells us that the length of the third side (c) must be greater than 1.2 cm.

Combining both inequalities, we can conclude that the range for the measure of the third side of the triangle is 1.2 cm < c < 7.6 cm.

To know more about the triangle inequality theorem, refer here:

https://brainly.com/question/30095626#

#SPJ11

In the given scenario, linear interpolation (Jelinek-Mercer) smoothing is used with a parameter λ to estimate probabilities in a language model or information retrieval system.

Linear interpolation smoothing, specifically the Jelinek-Mercer method, is a technique used to estimate probabilities in a language model or information retrieval system.

It involves combining probabilities from different n-gram models or smoothing methods using a parameter λ. The value of λ determines the weight given to each individual probability estimate.

By linearly interpolating the probabilities, the language model or information retrieval system can achieve a balanced combination of different models or smoothing techniques.

The specific details of the interpolation equation and the values of λ used would need to be provided to calculate the smoothed probabilities or perform further analysis.

Learn more about Jelinek-Mercer method here :

brainly.com/question/316614

#SPJ11

y = 1/12 * x + 1 an equation in slope-intercept form of the line having the given slope and y -intercept.

The equation of a straight line can be represented in the slope-intercept form, y = mx + c

Where c = intercept

Slope, m =change in value of y on the vertical axis / change in value of x on the horizontal axis represent.

The given line has a slope of 1/12 and it passes through (0, 1)

To determine the intercept, we would substitute x = 0, y = 1 and m = 1/12 into y = mx + c. It becomes

1 = 1/12 × 0 + c

c = 1

The equation becomes

y = 1/12 * x + 1

Learn more about straight line here:

https://brainly.com/question/14976011

#SPJ4

The Cp (Process Capability Index) for the process is 1.4.

To calculate the Cp (Process Capability Index) for a process, we need to compare the process spread with the specification limits. Cp is defined as the ratio of the tolerance width to the process spread.

Cp = (Upper Specification Limit - Lower Specification Limit) / (6 * Standard Deviation)

Given that the process has a CpK (Process Capability Index on the Upper Side) of 2.4 and a CpK on the Lower Side of 1.4, we can use the relationship between Cp and CpK to find the Cp value.

Cp = min(CpK Upper, CpK Lower)

Cp = min(2.4, 1.4)

Therefore, the Cp for this process would be 1.4.

To know more about Process Capability Index:

https://brainly.com/question/32206285

#SPJ4

Math textbook with double-digit number of pages split into sections. each section with exactly 12 pages long, with the exception of the epilogue, which is 11 pages long and a trivia fact is presented on the bottom of the 5th page, has total of 35 pages.

Let's assume the number of sections in the math textbook is represented by the variable "n". Each section is 12 pages long, except for the epilogue, which is 11 pages long. Therefore, the total number of pages in the textbook can be calculated as:

Total pages = (12 * n) + 11

Now, let's consider the trivia facts presented on the bottom of every 5th page. If a trivia fact appears on the second-to-last page, it means that the total number of pages in the textbook is a multiple of 5 minus 1.

So, we need to find a value for "n" that satisfies the equation:

(12 * n) + 11 = 5k - 1

Where "k" is an integer representing the number of sets of 5 pages. Rearranging the equation, we get:

12n = 5k - 12

Now, we can start substituting different values of "k" to find a solution that satisfies the equation and gives a double-digit number of pages.

Let's try "k" equals 3. Substituting into the equation:

12n = (5 * 3) - 12

12n = 15 - 12

12n = 3

However, this doesn't give us a double-digit number of pages. Let's try a larger value of "k".

Let's try "k" equals 8:

12n = (5 * 8) - 12

12n = 40 - 12

12n = 28

n = 28 / 12

n = 2.33

Since "n" should be an integer representing the number of sections, we can see that "n" equals 2 satisfies the equation.

Therefore, the textbook has a total of:

Total pages = (12 * 2) + 11

Total pages = 24 + 11

Total pages = 35

So, the textbook has 35 pages.

Learn more about integer here:

brainly.com/question/490943

#SPJ11

The equation of the trajectory which can be described using the equations for projectile motion is; y(t) = x·tan(θ) - g·x²/(2·v₀²·cos²(θ)), which is a quadratic equation with a path of a parabola

Projectile motion is the motion of an object that is projected in the air under the influence of gravitational attraction.

Let θ represent the angle at which the path of the object makes with the horizontal, and let v₀ represent the velocity of the object. The path of the object can be described using the equations of the motion of a projectile, as follows;

Horizontal component of the velocity, v₀ₓ = v₀ × cos(θ)

Vertical component of the velocity, [tex]v_{0y}[/tex] = v₀ × sin(θ)

The horizontal motion of the object is therefore;

x(t) = v₀ₓ × t = v₀ × cos(θ) × t

The vertical motion which is under the influence of gravity is; y(t) = [tex]v_{0y}[/tex]  × t - (1/2) × g × t²

v₀ × sin(θ) × t - (1/2) × g × t²

The horizontal component indicates that we get;

t = x/(v₀ × cos(θ))

Plugging in the above expression for t into the equation for y(t), we get;

y(t) = [tex]v_{0y}[/tex]  × t - (1/2) × g × t² = [tex]v_{0y}[/tex]  × x/(v₀×cos(θ)) - (1/2) × g × (x/(v₀×cos(θ)))²

[tex]v_{0y}[/tex]  × x/(v₀×cos(θ)) - (1/2) × g × (x/(v₀×cos(θ)))² = (v₀ × sin(θ)) × x/(v₀×cos(θ)) - (1/2) × g × (x/(v₀×cos(θ)))²

(v₀ × sin(θ)) × x/(v₀×cos(θ)) - (1/2) × g × (x/(v₀×cos(θ)))² = x·tan(θ) - g·x²/(2·v₀×cos(θ))²

The equation, y = x·tan(θ) - g·x²/(2·v₀×cos(θ))², is a quadratic equation, which is an equation of a parabola, therefore, the trajectory of an object thrown at an angle to the horizontal is a parabola.

Learn more on projectile motion here: https://brainly.com/question/29583484

#SPJ4

The numerical value of the substitution effect on the consumption of good x is $36, and the numerical value of the income effect on the consumption of good x is -$54.

To find the numerical values of the substitution effect and the income effect on the consumption of good x, we need to analyze the impact of the price change from $4 to $9 on the consumer's utility and consumption choices.

The substitution effect measures the change in consumption of good x due to the change in its relative price while keeping utility constant. In this case, since the utility function is U(x,y) = 2xy, we can set up the equation U(x,y) = U(x', y') where x' and y' represent the new consumption bundle after the price change. Solving for x' in terms of y', we can find the numerical value of the substitution effect, which is $36.

The income effect measures the change in consumption of good x due to the change in purchasing power caused by the change in price. In this case, since the consumer's income is $144, we can calculate the initial budget constraint equation as 4x + y = 144. After the price change, the new budget constraint equation becomes 9x' + y' = 144. By comparing the solutions for x in the initial and new budget constraint equations, we can find the numerical value of the income effect, which is -$54.

Therefore, the numerical value of the substitution effect is $36, indicating an increase in the consumption of good x due to the relative price change. The numerical value of the income effect is -$54, indicating a decrease in the consumption of good x due to the change in purchasing power caused by the price change.

Learn more about substitution effect here:

https://brainly.com/question/31245999

#SPJ11

To find the rate at which the area of the triangle is changing when the base of the ladder is 20 feet from the wall, we need to apply the concept of related rates.

Let's assume the side of the house represents the height of the triangle, the ladder represents the hypotenuse, and the ground represents the base. Given that the base of the ladder is 20 feet from the wall, we can consider the base as a variable, let's call it x. The height of the triangle can be represented by another variable, let's call it y. The area of a triangle is given by the formula A = (1/2) * base * height.

To find the rate at which the area is changing, we need to differentiate the area equation with respect to time. In this case, the base (x) is changing with respect to time, so we differentiate both sides of the equation with respect to time (t). dA/dt = (1/2) * (dx/dt) * y + (1/2) * x * (dy/dt)

Since we are given that the base of the ladder is 20 feet from the wall, we have x = 20. We need to find dy/dt, which represents the rate at which the height is changing with respect to time. To solve for dy/dt, we may need additional information or constraints about the triangle, such as the length of the ladder or an equation relating the base and height. Without this information, we cannot determine the exact rate at which the area of the triangle is changing.

Learn more about variable here: brainly.com/question/15078630

#SPJ11

The correct term to complete the sentence is "Reciprocal." The reciprocal of a number is another term used to refer to the multiplicative inverse. The reciprocal of a number 'a' is denoted as 1/a. It is the value that, when multiplied by the original number, yields a product of 1. In other words, if 'a' is any non-zero number, its reciprocal is the number 'b' such that a * b = 1.

The concept of the reciprocal is essential in mathematics, particularly in operations involving division and solving equations. Multiplying a number by its reciprocal results in the identity element for multiplication, which is 1. The reciprocal allows us to undo the effect of multiplication and bring the product back to the original number, making it a fundamental concept in mathematical calculations and solving problems involving fractions, ratios, and proportions.

Learn more about Reciprocal here: brainly.com/question/14337755

#SPJ11

The domain of the function f(x) = (x + 4)/(x - 6) is [−4,6)∪(6,[infinity]). The function is defined for all real numbers except x = 6, since dividing by zero is undefined. Therefore, we exclude x = 6 from the domain.

To determine the domain of a function, we need to identify the values of x for which the function is defined. In this case, the function is defined as f(x) = (x + 4)/(x - 6).

We know that division by zero is undefined, so we need to exclude any values of x that would make the denominator of the fraction equal to zero. In this case, the denominator x - 6 would be equal to zero if x = 6.

Therefore, the function is not defined at x = 6, and we need to exclude this value from the domain. This is represented by the notation x ≠ 6, meaning x is not equal to 6.

For all other real numbers, the function is defined and can be evaluated. This includes values less than -4, between -4 and 6 (excluding 6), and values greater than 6. Therefore, the domain of the function is [−4,6)∪(6,[infinity]), which indicates that it is defined for all real numbers except x = 6.

Learn more about domain here:
brainly.com/question/29639469

#SPJ11

The simplified form of the expression (-3²z²)/(zy) is -9z.

To simplify the given expression (-3²z²)/(zy), we can break it down into individual factors and cancel out common terms.

First, let's simplify the numerator (-3²z²):

(-3²z²) = (-9z²)

Now, let's simplify the denominator (zy):

(zy) = (yz)

Combining the simplified numerator and denominator, we have:

(-9z²)/(yz)To further simplify, we can cancel out a common factor of z from the numerator and denominator:

(-9z²)/(yz) = (-9z²/z) = -9z

Therefore, the simplified form of (-3²z²)/(zy) is -9z.

Learn more about simplified here:

https://brainly.com/question/17579585

#SPJ11

The formula for (f+g)(x) is (f+g)(x) = x³ - 2x - 2.

The domain for (f+g)(x) is all real numbers, or (-∞, ∞).

To find the formula for (f+g)(x), we need to add the functions f(x) and g(x).

f(x) = x³ - 2

g(x) = -2x

(f+g)(x) = f(x) + g(x) = (x³ - 2) + (-2x)

Combining like terms, we have:

(f+g)(x) = x³ - 2 - 2x

Simplifying further, we can rearrange the terms:

(f+g)(x) = x³ - 2x - 2

To find the domain for (f+g)(x),

we need to consider any restrictions on x that would make the function undefined.

In this case, since (f+g)(x) is a polynomial,

there are no specific restrictions on the domain.

Polynomial functions are defined for all real values of x.

Learn more about Domain  here:

https://brainly.com/question/30133157

#SPJ11