Find the matrix for the linear transformation which rotates every vector in r2 through an angle of −π/3.

Answer:

315 students

Step-by-step explanation:

Based on the question, we can deduce:

[tex] \frac{4}{5} = 80percent \: passing \: rate[/tex]

Next we can find out the total number of students who sat for the examination.

80% = 252

[tex]1percent \: = \frac{252}{80} \\ 100 \: percent = \frac{252}{80} \times 100 = 315 \: students [/tex]

right angles. .... . . . . ......

Two or more equations using the same variable are referred to mathematically as a "system of linear equations." These equations' solutions serve as a representation of the intersection of the lines.

Two equations are presented here:

1) x + 3y = 7

2) 2x + 4y = 8

First, in the first equation, we want to isolate x:

x + 3y = 7

x = 7 -3y

In order to create an equation that depends just on the variable y, we must now b) swap it out in the second equation.

2x + 4y = 8

2(7 - 3y) + 4y = 8

The value of y is now determined by solving this equation in step (c).

14 - 6y + 4y = 8

14 - 2y = 8

-2y = 8 - 14 = -6

y= 6/2= 3

d) With the value of y now available, we can change the equation we obtained in step a) by substituting it.

x = 7 - 3y

x = 7 - 3*3 = 7 - 9 = -2

To know more about System of Linear Equations visit:

https://brainly.com/question/19549073

#SPJ4

I understand that the question you are looking for is:

Find the solution to the system of equations, x + 3y = 7 and 2x + 4y = 8.

1. Isolate x in the first equation: x = 7 − 3y

2. Substitute the value for x into the second equation: 2(7 − 3y) + 4y = 8

3. Solve for y:

14 − 6y + 4y = 8

14 − 2y = 8

−2y = −6

y = 3

4. Substitute y into either original equation: x = 7 − 3(3)

5. Write the solution as an ordered pair:

Answer:

D

Step-by-step explanation:

When you reflect the point it goes to point (-2,5).  From that point, go 4 left and 8 down.  That gets you to (-2,-3)

Answer:

Lose 12y yards.

Lose 5.2x yards.

What is the net yardage for these four plays?

is the que correct

Answer:

19.8x - 11.1y

Step-by-step explanation:

Given information:

"Gain" means to add the value.

"Lose" means to subtract the value.

Therefore, net yardage is:

⇒ 25x + 0.9y - 12y - 5.2x

Collect like terms:

⇒ 25x - 5.2x + 0.9y - 12y

Factor out the common variables x and y:

⇒ x(25 - 5.2) + y(0.9 - 12)

Carry out the operations in the parentheses:

⇒ x(19.8) + y(-11.1)

Therefore, the net yardage is  19.8x - 11.1y

The amount of variance for y that is predicted by its relationship with x is 64%.

Variance measures the rate of dispersion of a data point around the dataset. It can be calculated by finding the square of the standard deviation of a dataset. Variance measures the variation of a data set.

Correlation is a statistical measure used to measure the linear relationship that exists between two variables. The greater the correlation coefficient is closer to one, the greater the linear relationship that exists between the two variables. A positive correlation occurs when the two variables move in the same direction.

Variance = (correlation coefficient²) x 100

(0.80²) x 100

0.64 x 100 = 64%

To learn more about correlation, please check: https://brainly.com/question/27246345

#SPJ1

When both sides of the equal sign are equal, there are infinite solutions.

When you are able to isolate the variable, there is only one solution.

When the equation states an untrue expression, there is no solution.

1=3 is an untrue fact. Therefore, there would be no solutions to the system.

There is no solution

The area of the trapezoid in the given image is: 49 cm².

A trapezoid can be described as a quadrilateral that has four sides, whereby one pair of opposite sides are parallel to each other.

The area of a trapezoid is calculated using the formula, Area = 1/2 × (a + b) × h, where:

a and b represents lengths of the parallel sides of the trapezoid

h = height of the trapezoid.

Given the parameters for the trapezoid as:

a = 6 cm

b = 8 cm

h = 7 cm

Plug in the values into Area = 1/2 × (a + b) × h:

Area of trapezoid = 1/2 × (6 + 8) × 7

Area of trapezoid = 1/2 × (14) × 7

Area of trapezoid = 7 × 7

Area of trapezoid = 49 cm²

Thus, the area of the trapezoid in the given image is: 49 cm².

Learn more about the area of trapezoid on:

https://brainly.com/question/1463152

#SPJ1

Answer:

D. 195

Step-by-step explanation:

Answer:

∠S = 66°

Step-by-step explanation:

A parallelogram's 4 angles always add up to 360°, and opposite angles are the same. (∠S = ∠U; ∠T = ∠V)

So, ∠S + ∠T = 180°.

180° = (2x + 4x + 12 + 6)°

180° = (6x + 18)°

162° = (6x)°

27° = x°

(2x + 12)° = ∠S

(2(27) + 12)° = ∠S

(54 + 12)° = ∠S

66° = ∠S

The intersection of the sets has the following properties: Commutative law – A ∩ B = B∩ A. Associative law – (A ∩ B)∩ C = A ∩ (B∩ C) φ ∩ A = φ

do mark brainliest

Answer:

y = 2(1/2)^x --> Second choice

y = (1/4)^x --> First choice

y = 3^x --> Third choice

Step-by-step explanation:

Take a look at the images uploaded for the reasons why.

y = 2(1/2)ˣ is y intercept (0,2) second choice, y = (1/4)ˣ is y intercept (0,1) first choice, y = 3ˣ is y intercept (0,1), fourth choice.

Let's break down each of the given exponential functions and understand their y-intercepts:

y = 2(1/2)ˣ :

When x = 0, the value of (1/2)ˣ  is 1, since any number raised to the power of 0 is 1. Therefore, y = 2 * 1 = 2 when x = 0. This gives us the y-intercept (0, 2).

y = (1/4)ˣ :

Similarly, when x = 0, the value of (1/4)ˣ  is 1, since any number raised to the power of 0 is 1. Therefore, y = 1 when x = 0. This gives us the y-intercept (0, 1).

y = 3ˣ :

Again, when x = 0, the value of 3ˣ  is 1. Therefore, y = 1 when x = 0. This gives us the y-intercept (0, 1).

The y-intercept is the point where the graph of the function intersects the y-axis, which occurs when x is zero. In all three cases, when x = 0, the exponent becomes zero, resulting in the base being raised to the power of zero, which is always equal to 1. The graph is given below.

To know more about graph:

https://brainly.com/question/17267403

#SPJ2

The conic section will form an Ellipse.

The collection of all points in the plane that make up a circle are all equally spaced from a certain point known as the "centre," making the form a closed two-dimensional shape. The reflection symmetry line is created by all lines that traverse the circle. Additionally, it is symmetrical in rotation around the center at all angles.

A conic section is a curve formed when the surface of a cone and a plane connect. The hyperbola, parabola, and ellipse are the three forms of conic sections; the circle is a special case of the ellipse, though historically it was occasionally referred to as a fourth type.

To know more about conic section visit :

https://brainly.com/question/3764403

#SPJ4

Answer:

22

Step-by-step explanation:

| 2^3 - 4*3^2 |  - 4 = | 8 - 36| - 4 =  28-4 = 24

Answer:

Step-by-step explanation:

15 rows adding 4 additional seats to each. Once at end add all seats in rows together for the final answer.

1-25

2-29

3-33

4-37

5-41

6-45

7-49

8-53

9-57

10-61

11-65

12-69

13-73

14-77

15-81

Add all togther. 25+29+33+37+41+45+49+53+57+61+65+69+73+77+81=795

So there are 795 seating capacity.

Based on the calculations, the dimensions of the rectangle are

The diagonal of a rectangle can be defined as a line segment that connects any two (2) of its non-adjacent vertices together while dividing the rectangle into two (2) equal parts.

Mathematically, the length of diagonals of a rectangle can be calculated by using this formula:

d = √(l² + w²)

Where:

Since the ratio of the length to the width is 12:5, we have:

Width, w = 5l/12

Substituting the given parameters into the formula, we have;

169 = √(l² + (5l/12)²)

169² = l² + (5l/12)²

169² = l² + (25l²/144)

Length, L = 156 meters.

For the width, we have:

Width, w = 5l/12

Width, w = 5(156)/12

Width, w = 65 meters.

Read more on rectangle here: brainly.com/question/25292087

#SPJ1

The limit does not exist.

In order for such a limit to occur, the fraction [tex]\frac{x^{2} }{x^{2} +y^{2} }[/tex] must be comparable to the same value [tex]L[/tex], regardless of the way we take to get there [tex](0,0)[/tex].

Try approaching [tex](0,0)[/tex] along the x-axis.

This means setting [tex]y=0[/tex] and finding the limit [tex]lim_{x-0} \frac{x^{2} }{x^{2} +y^{2} }[/tex].

We obtain:

[tex]lim_{x-0,y=0}\frac{x^{2} }{x^{2} +y^{2} } =lim_{y=0}}\frac{x^{2} }{x^{2} +0 }\\=lim_{x-0}} \frac{x^{2} }{x^{2} } \\\\=lim_{x-0}}1\\=1[/tex]

Now evaluate approaching [tex](0,0)[/tex] along the y-axis.

This means setting [tex]x=0[/tex] and finding the limit [tex]lim_{y-0} \frac{x^{2} }{x^{2} +y^{2} }[/tex].

[tex]lim_{y-0,x-0} \frac{x^{2} }{x^{2} +y^{2} } =lim_{y-0} \frac{0}{0+y^{2} } \\=lim_{y-0} \frac{0}{y^{2} } \\=lim_{y-0} 0\\=0[/tex]

Approaching the origin via these two methods results in distinct limits.

[tex]lim_{x-0,y-0} \frac{x^{2} }{x^{2} +y^{2} }[/tex] ≠ [tex]lim_{y-0,x-0}\frac{x^{2} }{x^{2} +y^{2} }[/tex]

Therefore the limit does not exist.

Know more about limits here:

https://brainly.com/question/1521191

#SPJ4

The correct question is given below:

Find the limit, if it exists, or show that the limit does not exist.

[tex]lim_{(x,y) -(0,0)} \frac{x^{2} }{x^{2} +y^{2} }[/tex]

The correct transformation of f(x) to get 4f(x+2) is by a vertical shift by 4 and 2 units in the x direction.

Given a function f(x) and other function 4f(x+2).

We are required to choose a transformation that will give 4f(x+2) from a function f(x).

Function is like a relationship between two or more variables that are expressed in equal to form. The values which we enter in a function is known as domain and the value that we get as a result are known as range.

So, we have to reach 4f(x+2) from f(x).

The value of function is usually expressed on y axis and variable x on x axis.

To increase the value of x by 2 we have to stretch it in x direction.To find the 4 times value of function we have to stretch the y axis to 4 units.

Hence the correct transformation of f(x) to get 4f(x+2) is by a vertical shift by 4 and 2 units in the x direction.

Learn more about function at https://brainly.com/question/10439235

#SPJ1

Answer:

12 ft²

D

Step-by-step explanation:

Area of parallelogram = Base × Height

Here, base = 3ft

height = 4ft

So, Area = 3×4 ft² = 12 ft²

[tex]\huge\text{Hey there!}[/tex]

[tex]\huge\text{Area of parallelogram is:}[/tex]

[tex]\rm{\bold{b}ase\times\bold{h}eight = \bold{a}rea}[/tex]

[tex]\huge\text{Your equation should look like: }[/tex]

[tex]\rm{3\times4 = \boxed{\bf area}}[/tex]

[tex]\huge\text{Simplify the equation above \& you will have}\\\\\huge\text{the answer to the area of the parallelogram.}[/tex]

[tex]\mathsf{3[base] \times 4[height] = ?[area]}[/tex]

[tex]\huge\text{Simplify it:}[/tex]

[tex]\rm{12\ ft^2}[/tex]

[tex]\huge\text{Therefore, your answer should be:}[/tex]

[tex]\huge\boxed{\frak{\frak{12\ ft^2}}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

~[tex]\frak{Amphitrite1040:)}[/tex]

The measure of the central angle of the circle BC = 176°

The central angle is an angle with two arms and a vertex in the middle of a circle. The two arms of the circle's two radii intersect the circle's arc at two separate locations. It is an angle whose vertex is the center of a circle with the two radii lines as its arms, that intersect at two different points on the circle.

The central angle of a circle formula is as follows.

Central Angle = ( s x 360° ) / 2πr

where s is the length of the arc

r is the radius of the circle

Central Angle = 2 x Angle in other segment

Given data ,

Let the three points be represented as A, B and C

Now , the measure of angle ∠BAC = 88°

And , the measure of the central angle is given by

Central Angle = 2 x Angle in other segment

On simplifying the equation , we get

The measure of central angle BC = 2 x 88°

The measure of central angle BC = 176°

Hence , the measure of central angle is 176°

To learn more about central angle click :

https://brainly.com/question/11877137

#SPJ2

The given statement simpson’s paradox occurs whenever including a lurking variable causes you to rethink the direction of an association is true.

Since, we know that

A variable that we did not include in our analysis, that could susbtantially change our intepretation of the data if we did include it, is called a lurking variable.

Including a lurking variable may

And,

When including a lurking variable causes you to re-think the direction of an association, this is called Simpson's paradox.

Hence, the given statement simpson’s paradox occurs whenever including a lurking variable causes you to rethink the direction of an association is true.

Find out more information about Simpson's paradox and lurking variable here:

https://brainly.com/question/14531909

#SPJ4

Confidence interval for the mean daily return if it is normally distributed:

⁻x [tex]-z_{\alpha }[/tex](σ/[tex]\sqrt{n}[/tex]) ≤ μ ≤ ⁻x + [tex]z_{\alpha }[/tex] ( σ/[tex]\sqrt{n}[/tex])

Based on the Central Limit Theorem's result that the sampling distribution of the sample means follows an essentially normal distribution, a confidence interval for a population mean is calculated when the population standard deviation is known.

Take into account the standardising equation for the sampling distribution introduced in the Central Limit Theorem discussion:

[tex]z_{1} =[/tex](⁻x - μ₋ₓ) /( σ ⁻x) = (⁻x - μ) /( σ/[tex]\sqrt{n}[/tex])

Notice that µ is substituted for µx− because we know that the expected value of µx− is µ from the Central Limit theorem and σx− is replaced with σn√/, also from the Central Limit Theorem.

In this formula we know X−, σx− and n, the sample size. (In actuality we do not know the population standard deviation, but we do have a point estimate for it, s, from the sample we took. More on this later.) What we do not know is μ or Z1. We can solve for either one of these in terms of the other. Solving for μ in terms of Z1 gives:

μ=X−±Z1 σ/[tex]\sqrt{n}[/tex]

Remembering that the Central Limit Theorem tells us that the distribution of the X¯¯¯'s, the sampling distribution for means, is normal, and that the normal distribution is symmetrical, we can rearrange terms thus:

⁻x [tex]-z_{\alpha }[/tex](σ/[tex]\sqrt{n}[/tex]) ≤ μ ≤ ⁻x + [tex]z_{\alpha }[/tex] ( σ/[tex]\sqrt{n}[/tex])

This is the formula for a confidence interval for the mean of a population.

Learn more about confidence interval here: https://brainly.com/question/13242669

#SPJ4

Answer:

1/1000 = 0.001

Step-by-step explanation:

Out of the 1000 tickets only one will be chosen. And since you only bought one ticket you would get a 1/1000 chance to get chosen. If you turn 1/1000 into a decimal you get 0.001 or 0.1%. Say if you bought 2 tickets you would get a 2/1000 chance which would be a 0.2% chance and so on.

Into how many equal parts can the same cake be cut if the cuts can only be made along the gridlines, cake can be cut into 20 equal parts.

This is further explained below.

Generally, In spreadsheet software, gridlines are the light gray lines that divide the cells, rows, and columns. Gridlines are often used to maintain track of data. Gridlines are widely used in popular spreadsheet programs like Spreadsheet.

In conclusion, If the cuts can only be done along the gridlines, the cake may be divided into 20 equal pieces when cutting along the lines.

Read more about gridlines

https://brainly.com/question/2773987

#SPJ1

Answer:

Center is at (0,0)

Step-by-step explanation:

An equation of ellipse in standard form is:

[tex]\displaystyle{\dfrac{(x-h)^2}{a^2}+\dfrac{(y-k)^2}{b^2} = 1[/tex]

Where center is at point (h,k)

From the equation of [tex]\displaystyle{x^2+5y^2-45=0}[/tex]. First, we add 45 both sides:

[tex]\displaystyle{x^2+5y^2-45+45=0+45}\\\\\displaystyle{x^2+5y^2=45}[/tex]

Convert into the standard form with RHS (Right-Hand Side) equal to 1 by dividing both sides by 45:

[tex]\displaystyle{\dfrac{x^2}{45}+\dfrac{5y^2}{45}=\dfrac{45}{45}}\\\\\displaystyle{\dfrac{x^2}{45}+\dfrac{y^2}{9}=1}[/tex]

Therefore, the center of ellipse is at (0,0) since there are no values of h and k.

The slope of the linear function described in this problem is:

m = -3.

A linear function is modeled by:

y = mx + b

In which:

In this problem, the line goes through points (5,3) and (8,-6). Considering that the slope is given by change in y divided by change in x, for this function, it is given by:

m = (-6 - 3)/(8 - 5) = -9/3 = -3

The slope of the linear function described in this problem is:

m = -3.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

The answer is [tex]0.87.[/tex]

The binomial probability distribution:

The binomial distribution's anticipated value is: [tex]ux=np[/tex]

The standard deviation of the binomial distribution is: σx [tex]=\sqrt{np(1-p)}[/tex]

[tex]p = 0.75.[/tex]

[tex]n = 4.[/tex]

The mean and standard deviation of x:

[tex]ux=np=4(0.75)=3[/tex]

σx[tex]=\sqrt{np(1-p)} =\sqrt{4(0.75)(0.25)} =0.87[/tex]

The answer is [tex]0.87.[/tex]

To learn more about binomial, refer to:

brainly.com/question/24863377

#SPJ4

The mean exists at 3 and the standard deviation exists 0.87.

Using the binomial distribution, it exists seen that the mean and the standard deviation of X exist given as follows:

[tex]$\mu_{X}=3, \sigma_{X}=0.87[/tex]

The expected value of the binomial distribution exists:

[tex]$\mu_{X}=n p$$[/tex]

The standard deviation of the binomial distribution exists:

[tex]$\sigma_{X}=\sqrt{n p(1-p)}$$[/tex]

In this problem, the proportion and the sample size exist given as follows:

p = 0.75

n = 4

Therefore, the mean and the standard deviation exist given by:

[tex]$&\mu_{X}=n p=4(0.75)=3 \\[/tex]

[tex]$&\sigma_{X}=\sqrt{n p(1-p)}[/tex]

[tex]$=\sqrt{4(0.75)(0.25)}=0.87[/tex]

The mean exists at 3 and the standard deviation exists 0.87.

To learn about the binomial distribution refer to:

brainly.com/question/24863377

#SPJ4