find the measure of a central angle of a regular polygon with $24$ sides. round your answer to the nearest tenth of a degree, if necessary.

Answer:

Step-by-step explanation:

Negtive 1

Negtive 2

Negtive 3

Negtive 4

Answer:

[tex]f(x)=\frac{4x+3}{2x}[/tex]

Step-by-step explanation:

We are given the following function: [tex]f(x)=\frac{8x^2+2x-3}{4x^2-2x}[/tex], and we want to simplify it.

Starting with the numerator, we can factor 8x² + 2x - 3 to become (2x-1)(4x+3).

We can also pull out 2x from the denominator to get 2x(2x-1).

Now, our function will look like:

[tex]f(x)=\frac{(2x-1)(4x+3)}{2x(2x-1)}[/tex]

We can cancel 2x-1 from both the numerator and denominator.

We are left with:

[tex]f(x)=\frac{4x+3}{2x}[/tex]

The requried, for a given proportional relationship when x = 9 and z = 10, y is equal to 0.72.

If y varies directly with x and inversely with the square of z, we can write the following proportion:

y ∝ x / z²

To solve for k, we can use the initial condition:

y = k (x / z²)

When x = 4 and z = 2, y = 8. Substituting these values into the equation, we get:

8 = k (4 / 2²)

k = 8

So, the equation for the variation is:

y = 8 (x / z²)

To find y when x = 9 and z = 10, we substitute these values into the equation:

y = 8 (9 / 10²)

y = 0.72

Therefore, when x = 9 and z = 10, y is equal to 0.72.

Learn more about ratios and proportions here:

https://brainly.com/question/29774220

#SPJ1

Answer:

$270.00

Step-by-step explanation:

Simple Interest, describes interest that only applies to the principle balance (aka first balance). In the graph, that is represented by the green line.

Answer:

8384742

Step-by-step explanation:

Answer:

there is no cow there because they have been barn

[tex](Ax^2 + 4Ax + 2B)e^x + (2A + B + Ce^x) - 2((Ax^2 + 2Ax + B)e^x + (B + Ce^x)) - 3(Ax^2e^x + Bxe^x + Ce^[/tex]

We can use the method of undetermined coefficients to find particular solutions to these

differential equations.

For y" - [tex]3y' + 2y = (e^3x (1 + x)[/tex], we assume a particular solution of the form y_p = Ae^3x(1 + x) + Bx^2 + Cx + D. Then, [tex]y_p' = 3Ae^3x(1 + x) + 2Bx + C[/tex]and y_p" [tex]= 9Ae^3x + 2B[/tex]. Substituting these into the differential equation, we get:

[tex]9Ae^3x + 2B - 9Ae^3x - 6Ae^3x - 3Ae^3x + 3Ae^3x(1 + x) + 2Bx + Cx + D = e^3x(1 + x)[/tex]

Simplifying and collecting like terms, we get:

[tex](3A + 2B)x + Cx + D = e^3x(1 + x)[/tex]

Matching coefficients, we have:

3A + 2B = 0

C = 1

D = 0

Solving for A and B, we get:

A = -2/9

B = 3/4

Therefore, a particular solution is [tex]y_p = (-2/9)e^3x(1 + x) + (3/4)x^2 + x[/tex].

For [tex]y" - 6y' + 5y = e^-3[/tex]x([tex]35 - 8x[/tex]), we assume a particular solution of the form [tex]y_p = Ae^-3x + Bx + C[/tex]. Then, [tex]y_p' = -3Ae^-3x + B[/tex] and [tex]y_p" = 9Ae^-3x[/tex]. Substituting these into the differential equation, we get:

[tex](9A + B)x + (-6A - 6B + C) = e^-3x(35 - 8x[/tex]

Simplifying and collecting like terms, we get:

[tex](9A + B)x + (-6A - 6B + C) = e^-3x(35 - 8x[/tex])

Matching coefficients, we have:

9A + B = 0

-6A - 6B + C = 35

Solving for A, B, and C, we get:

A = -5/27

B = 15/27 = 5/9

C = 290/27

Therefore, a particular solution is y_p [tex]= (-5/27)e^-3x + (5/9)x + 290/27.For y" - 2y' - 3y = e^x[/tex] [tex](-8 + 3x)[/tex], we assume a particular solution of the form [tex]y_p = Ax^2e^x + Bxe^x + Ce^x. Then, y_p' = (Ax^2 + 2Ax + B)e^x + (B + Ce^x) and y_p" = (Ax^2 + 4Ax + 2B)e^x + (2A + B + Ce^x)[/tex]. Substituting these into the differential equation, we get:

[tex](Ax^2 + 4Ax + 2B)e^x + (2A + B + Ce^x) - 2((Ax^2 + 2Ax + B)e^x + (B + Ce^x)) - 3(Ax^2e^x + Bxe^x + Ce^[/tex]

To learn more about undetermined visit:

https://brainly.com/question/31392685

#SPJ11

1.88% of the area under the normal curve is to the left of the z-score -2.08.

To find the percentage of the area under the normal curve to the left of the given z-score (z = -2.08), you can use a z-table or an online calculator.

Using a z-table, find the value corresponding to z = -2.08.

The value you will find is 0.0188. This value represents the area under the curve to the left of the z-score. To express this as a percentage, we multiply it by 100:

0.0188 * 100 = 1.88%

Therefore, approximately 1.88% of the area under the normal curve is to the left of the z-score -2.08.

To learn more about normal curve visit : https://brainly.com/question/27271372

#SPJ11

For the depth function of submarine in water is, d = 500t - 4,500, where t is the time (in minutes), the intercepts say x-intercept and y-intercept values are -4500 and 9 respectively.

The x-intercept is the point where a line cross or meet the x-axis, and the y-intercept is the point where a line cross or meet the y-axis. For y-intercept we are setting x to zero and for x-intercept we are setting y = 0 and determining their corresponding values. We have a submarine is exploring the ocean floor and begins to ascend to the surface.

The depth of submarine in the water can be modeled by equation, d = 500t - 4,500, where t is the time (in minutes). We have to determine the x and y intercept values. As we know, equation of line in slope intercept form is y = mx + b

where, b--> y-intercept

m --> slope

In this case b = - 4500, m = 500

So, y-intercept= -4500 for t = 0. Now, for x-intercept that for t value, plug d = 0, 0 = 500t - 4500

=> 500 t = 4500

=> t = 9

So, x-intercept = 9

Hence, required value is 9.

For more information about intercepts, visit :

https://brainly.com/question/24990033

#SPJ4

Complete question:

A submarine is exploring the ocean floor and begins to ascend to the surface. The depth of the submarine in the water can be modeled by the function `d=500t-4,500` where t is the time (in minutes) since the submarine began to ascend. Find the intercepts of the graph of the equation:

x-intercept:

y-intercept:

The first four terms of the Maclaurin series of f are 8, 5x, 5x², and 6x³.

To discover the Maclaurin arrangement of f(x), we ought to utilize the equation:

f(x) = f(0) + f'(0)x + (f''(0)²) / 2! + (f'''(0)x³ / 3! + ...

where f(0), f'(0), f''(0), and f'''(0) are the values of the work and its subordinates assessed at x = 0.

Utilizing the given values, we have:

f(0) = 8, f'(0) = 5, f''(0) = 10, f'''(0) = 36

Substituting these values within the equation, we get:

f(x) = 8 + 5x + (10²) / 2! + (36³) / 3! + ...

Rearranging the terms, we get:

f(x) = 8 + 5x + 5² + 6x³ + ...

Subsequently, the primary four terms of the Maclaurin arrangement of f(x) are:

8, 5x, 5x², 6x³.

To know more about the Maclaurin series  refer to this :

https://brainly.com/question/28170689

#SPJ4

Check the picture below.

so if we just get the volume of the whole box, and the volume of the balls, if we subtract the volume of the balls from that of the whole box, what's leftover is the part we didn't subtract, namely the empty space.

[tex]\stackrel{ \textit{\LARGE volumes} }{\stackrel{ whole~box }{(3.5)(3.5)(12.1)}~~ - ~~\stackrel{\textit{three balls} }{3\cdot \cfrac{4\pi (1.65)^3}{3}}} \\\\\\ 148.225~~ - ~~17.9685\pi ~~ \approx ~~ \text{\LARGE 91.8}~cm^3[/tex]

Answer:

5xy + 6y

Step-by-step explanation:

4x(2y) + 3y(2-x)

= 8xy + 6y - 3xy

= 5xy + 6y

So, the answer is 5xy + 6y

The simplified expression is:5xy + 6y

Expanding the expression gives:

4x(2y) + 3y(2 - x) = 8xy + 6y - 3xy

Combining like terms, we get:

8xy - 3xy + 6y = 5xy + 6y

Therefore, the simplified expression is:

5xy + 6y

To know more about expression visit:

brainly.com/question/14083225

The expected value E(X) is 5.6.

To find the expected value E(X) of the given data, we'll use the terms you provided: data points (5, 6, 8, 9), probabilities (0.2, 0.2, 0.2, 0.2), and the formula E(X) = Σ [x * P(X = x)].

Step 1: List the data points and their corresponding probabilities:
X: 5, 6, 8, 9
P(X = x): 0.2, 0.2, 0.2, 0.2

Step 2: Use the formula E(X) = Σ [x * P(X = x)] and plug in the values:
E(X) = (5 * 0.2) + (6 * 0.2) + (8 * 0.2) + (9 * 0.2)

Step 3: Calculate each term:
E(X) = 1 + 1.2 + 1.6 + 1.8

Step 4: Sum up the terms:
E(X) = 5.6

Step 5: Round your answer to one decimal place:
E(X) = 5.6

So, the expected value E(X) of the given data is 5.6.

Know more about expected value here:

https://brainly.com/question/24305645

#SPJ11

If the p-value is greater than the chosen significance level, you fail to reject the null hypothesis, indicating no significant difference between the observed counts and expected probabilities.

In order to carry out this hypothesis test in Rguroo, we need to first understand the concept of probabilities and the null hypothesis.

To carry out the hypothesis test in Rguroo using the observed counts from the last four questions and the expected (null) probabilities from the null hypothesis in question 11, follow these steps:

1. Ensure you have the observed counts from the last four questions, and they sum up to 1019 (the sample size).
2. Obtain the expected (null) probabilities from the null hypothesis in question 11.
3. Open Rguroo and select "Hypothesis Test for Proportions."
4. Input the sample size (1019) and the observed counts for each category from the last four questions.
5. Input the expected (null) probabilities for each category from the null hypothesis in question 11.
6. Run the analysis to obtain the test statistic and p-value for the hypothesis test.
Probabilities are the chances or likelihood of an event occurring. In statistics, probabilities are used to measure the likelihood of obtaining a certain result or outcome. The null hypothesis, on the other hand, is a statement that assumes there is no significant difference between two sets of data or variables. It is often used as a starting point for statistical hypothesis testing.

To carry out the hypothesis test using the observed counts for 2010 and the expected (null) probabilities from the null hypothesis in question 11, we would need to perform a chi-squared test. This test compares the observed frequencies to the expected frequencies, assuming that the null hypothesis is true.

In Rguroo, we can input the observed counts and the expected probabilities and run a chi-squared test to determine whether there is a significant difference between the two sets of data. The results of the test will indicate whether we can reject or fail to reject the null hypothesis.

Based on the p-value, you can determine whether to reject or fail to reject the null hypothesis. If the p-value is less than the chosen significance level (e.g., 0.05), you can reject the null hypothesis, suggesting that the observed counts are significantly different from the expected probabilities.

Learn more about the Null Hypothesis:

brainly.com/question/28920252

#SPJ11

The probability of not getting a 6 or 10 total on either of two tosses of a pair of fair dice is 7/9.

To find the probability of not getting a 6 or 10 total on either of two tosses of a pair of fair dice, we first need to find the total number of possible outcomes when rolling two dice. There are 6 possible outcomes for the first die and 6 possible outcomes for the second die, giving us a total of 6 x 6 = 36 possible outcomes.

Next, we need to determine how many of these outcomes result in a total of 6 or 10. There are 5 ways to get a total of 6: (1,5), (2,4), (3,3), (4,2), and (5,1). There are also 3 ways to get a total of 10: (4,6), (5,5), and (6,4). So, there are 5 + 3 = 8 outcomes that result in a total of 6 or 10.

Therefore, the probability of not getting a 6 or 10 total on either of two tosses of a pair of fair dice is:

P(not 6 or 10) = 1 - P(6 or 10)

= 1 - 8/36

= 1 - 2/9

= 7/9

So the probability of not getting a 6 or 10 total on either of two tosses of a pair of fair dice is 7/9.

To learn more about probability visit:

https://brainly.com/question/15124899

#SPJ11

The surface with equation (y^2 + 1)e^z – (z^2 + 1)e^x + y^2z^2e^y = 0 can be parametrized as follows 1:

x = u

y = v

z = ln((v^2 + 1) / (u^2 + 1))

Parametrization of a surface is a mathematical technique used to describe a surface in terms of parameters. It involves expressing the coordinates of points on the surface as functions of two or more parameters. A common way to parametrize a surface is to use two parameters u and v to represent the coordinates of points on the surface. This is called a parametric representation or a parametric equation of the surface. Another way to parametrize a surface is to use a vector-valued function, which maps a point in a domain onto a point on the surface. Both of these techniques allow us to describe the surface in a way that is useful for mathematical analysis and visualization.

#SPJ11

Learn more about parametric representation of the surface:  https://brainly.com/question/24189086.

This contradicts our assumption, so we conclude that 40 does not leave a remainder of 3 upon division by 7.

(a) To show that 45 leaves a remainder of 3 upon division by 7, we need to find an integer k such that 45 = 7k + 3. We can write 45 as 42 + 3, which gives us 45 = 7(6) + 3. Thus, n = 45 satisfies the definition and leaves a remainder of 3 upon division by 7.

(b) To show that -32 leaves a remainder of 3 upon division by 7, we need to find an integer k such that -32 = 7k + 3. We can write -32 as -35 + 3, which gives us -32 = 7(-5) + 3. Thus, n = -32 satisfies the definition and leaves a remainder of 3 upon division by 7.

(c) To show that 3 leaves a remainder of 3 upon division by 7, we need to find an integer k such that 3 = 7k + 3. We can write 3 as 0 + 3, which gives us 3 = 7(0) + 3. Thus, n = 3 satisfies the definition and leaves a remainder of 3 upon division by 7.

(d) To show that -4 leaves a remainder of 3 upon division by 7, we need to find an integer k such that -4 = 7k + 3. We can write -4 as -7 + 3, which gives us -4 = 7(-1) + 3. Thus, n = -4 satisfies the definition and leaves a remainder of 3 upon division by 7.

(e) To prove that 40 does not leave a remainder of 3 upon division by 7, we assume the opposite, that is, we assume that 40 does leave a remainder of 3 upon division by 7. This means that there exists an integer k such that 40 = 7k + 3. Rearranging this equation gives us 37 = 7k, which means that k is not an integer, since 37 is not divisible by 7. This contradicts our assumption, so we conclude that 40 does not leave a remainder of 3 upon division by 7.

To learn more about remainder visit:

https://brainly.com/question/20286167

#SPJ11

The expression that represent the length of the rope is 10 / cos 40° =  13.1 feet

A 12-foot pole is supporting a tent and has a rope attached to the top. The rope is pulled straight and the other end is attached to a peg two foot above the ground.

This situation forms a right angle triangle. Therefore, let's find the expression that shows the length of the rope using trigonometric ratios.

Hence,

cos 40 = adjacent / hypotenuse

adjacent side = 10 ft

Therefore,

cos 40° = 10 / x

where

cross multiply

x = 10 / cos 40°

x = 10 / 0.76604444311

x = 13.0548302872

x = 13.1 feet

learn more on right triangle here: https://brainly.com/question/28281614

#SPJ1

The endpoints of the t-distribution with 2.5% beyond them in each tail for the given sample sizes are approximately -2.0301 and 2.0301.

To find the endpoints of the t-distribution with 2.5% beyond them in each tail for the given sample sizes, follow these steps:

1. Determine the degrees of freedom: Since you have two samples with sizes n1 = 15 and n2 = 22, the degrees of freedom (df) will be (n1 - 1) + (n2 - 1) = 14 + 21 = 35.

2. Find the t-value corresponding to the 2.5% tail probability: Using a t-distribution table or an online calculator, look for the t-value that corresponds to a cumulative probability of 0.975 (since you want 2.5% in each tail, and the remaining 95% is between the tails). For df = 35, the t-value is approximately 2.0301.

3. Determine the endpoints: The endpoints of the t-distribution will be the positive and negative t-values found in step 2. So, the endpoints are approximately -2.0301 and 2.0301.

Thus, the endpoints of the t-distribution with 2.5% beyond them in each tail for the given sample sizes are approximately -2.0301 and 2.0301.

Learn more about distribution here:

brainly.com/question/24083306

#SPJ11

The value of x is 88.22 units.

Given is right triangle, we need to find the value of x,

tan 60° = 85 / a

a = 85 / √3

a = 49

Now,

tan 30° = 85 / a + x

a+x = 85 ÷ 1/√3

a+x = 147.22

x = 147.2-49

x = 88.22

Hence, the value of x is 88.22 units.

Learn more about tangent of an angle, click;

https://brainly.com/question/10053881

#SPJ1

Answer: 50

Step-by-step explanation:

Answer:

50?

Step-by-step explanation:

10-5 equals 5

5+7 equals 12

12-2 equals 10

10-9 equals 1

1+2 equals 3

3-5 equals -2

-2+12 equals 10

10-3 equals 7

7+7 equals 14

14-3 equals 11

11+9 equals 20

20-10 equals 10

10-6 equals 4

4+8 equals 12

12-2 equals 10

10+60 equals 70

70-20 equals 50

One-way ANOVA is applied to independent samples taken from three normally distributed populations with equal variances. The null hypothesis for this procedure is:

H0: μ1 = μ2 = μ3

This means that there are no significant differences between the means of the three normally distributed populations.

One-way ANOVA: One-way ANOVA is a statistical test used to compare the means of three or more independent groups.

Null hypothesis: The null hypothesis for one-way ANOVA is that the means of all the groups are equal.

Alternative hypothesis: The alternative hypothesis, which is accepted if the null hypothesis is rejected, is that at least one of the population means is different from the others.

In this case, the alternative hypothesis is: Ha: At least one of the means is different Test statistic: The test statistic used in one-way ANOVA is the F-statistic.

A small p-value (usually less than 0.05) indicates strong evidence against the null hypothesis.

Decision: If the p-value is less than the significance level (usually 0.05), we reject the null hypothesis and conclude that at least one of the population means is different from the others.

Learn more about One-way ANOVA:

https://brainly.com/question/23638404

#SPJ11

The first-rate is 4 times larger than the second rate, so we can say that the first-rate is 4 times the second rate.

To compare these two rates, we need to convert them to the same unit. Let's convert the first rate to dollars per ounce:

$2.56 per 1/2 pound = $2.56 / (1/2 lb) = $2.56 / 8 oz = $0.32 per oz

So the first rate is $0.32 per ounce.

Now, let's convert the second rate to dollars per ounce:

$0.48 per 6 ounces = $0.48 / 6 oz = $0.08 per oz

So the second rate is $0.08 per ounce.

Therefore, the equivalent rates are:

$0.32 per oz and $0.08 per oz

To know more about  interest here

https://brainly.com/question/25720319

#SPJ4

If an independent-measures design is used, a total of 20 participants would be needed, with 10 participants in each treatment condition.

If a repeated-measures design is used, only 10 participants would be needed since each participant would serve as their own control and be tested in both treatment conditions.  If a matched-subjects design is used, the number of participants needed would depend on how many pairs of matched subjects are needed. For example, if 5 pairs of matched subjects are needed, then a total of 10 participants would be needed.

More on independent-measures: https://brainly.com/question/29486078

#SPJ11

The discontinuity of the given function is at (−2, 1) and zero at (−3, 0).

The given function is:

f(x) =   [tex]\frac{x^{2} + 5x + 6}{x + 2}[/tex]

We will factorize the numerator and then reduce this function.

= [tex]\frac{x^{2} + 2x + 3x + 6}{x + 2}[/tex]

=  [tex]\frac{x(x + 2) +3 (x + 2)}{x + 2}[/tex]

= [tex]\frac{(x + 2) (x + 3)}{x + 2}[/tex]

If we take the value of x as -2, both the numerator and denominator will be 0. Note that for x = -2, both the numerator and denominator will be zero. When both the numerator and denominator of a rational function become zero for a given value of x we get a discontinuity at that point. which means there is a hole at x = -2.

Now, when we reduce this function by canceling the common factor from the numerator and denominator we get the expression f(x) = x + 3.  If we use the value of x = -2 in the previous expression we get;

f(x) = x + 3 =  = -2 + 3

f(x) = 1

Therefore, there is a discontinuity (hole) at (-2, 1).

If x = -3, the value of the function is equal to zero. This means x = -3 is a zero or root of the function.

Therefore, (-3, 0) is a zero of the function.

To learn more about discontinuity;

https://brainly.com/question/9837678

#SPJ4

Yes, snow and "cold" weather are independent events. The probability of snow and a "cold" day is 15.

Based on the given probabilities, we can determine if snow and "cold" weather are independent events. Independent events occur when the probability of both events happening together is equal to the product of their individual probabilities.

P(snow) = 0.30

P(cold) = 0.50

P(snow and cold) = 0.15

If snow and cold are independent, then P(snow and cold) = P(snow) * P(cold).

0.15 = 0.30 * 0.50

0.15 = 0.15

Since both sides of the equation are equal, snow and "cold" weather are independent events.

Your answer: b. yes

To learn more about independent events, click here:

brainly.com/question/30905572

#SPJ11

Answer:

7/4, 9/4, 11/4, 13/4

Step-by-step explanation:

+ In an arithmetic sequence, to find the pattern you must subtract a term from the term after it to find the common difference.

3/4 subtracted from 5/4 is 2/4

1/4 subtracted from 3/4 is 2/4

+ So the common difference is 2/4 (Aka 1/2, but you want to keep the same denominator)

+ Therefore, between each new term, you add 2/4

1/4, 3/4, 5/4, 7/4, 9/4, 11/4, 13/4... and so on

The solution to the IVP is Y(t) = [ -5e^(4t) - 5e^(-t); 3e^(4t) - e^(-t)] with initial condition Y(0) = [5; 3].

To solve the IVP dY/dt - [3 10; -1 5] Y = [8; 0] with initial condition Y(0) = [5; 3], we can use the matrix exponential method.

First, we need to find the eigenvalues and eigenvectors of the matrix A = [3 10; -1 5]. We can do this by solving the characteristic equation det(A - λI) = 0, where I is the identity matrix and λ is the eigenvalue.

det(A - λI) = (3-λ)(5-λ) + 10 = λ^2 - 8λ + 25 = (λ-4)^2

So, the eigenvalue is λ = 4 with multiplicity 2. To find the eigenvectors, we need to solve (A - λI)x = 0 for each eigenvalue.

For λ = 4, we have

(A - λI)x = [3 10; -1 5 - 4] [x1; x2] = [0; 0]

which gives us the equation 3x1 + 10x2 = 0 and -x1 + x2 = 0. Solving these equations, we get x1 = -10/3 and x2 = 1. So, the eigenvector corresponding to λ = 4 is [ -10/3; 1].

Since we have repeated eigenvalues, we need to find the generalized eigenvector. We can do this by solving (A - λI)x = v, where v is any vector that is not an eigenvector.

Let v = [1; 0], then (A - 4I)x = [1; 0] gives us 3x1 + 10x2 = 1 and -x1 + x2 = 0. Solving these equations, we get x1 = -2/3 and x2 = 1/3. So, the generalized eigenvector corresponding to λ = 4 is [ -2/3; 1/3].

Now, we can form the matrix P = [ -10/3 -2/3; 1 1/3] and the diagonal matrix D = [4 1; 0 4], where the diagonal entries are the eigenvalues.

Using the formula Y(t) = e^(At) Y(0), we can write Y(t) as

Y(t) = P e^(Dt) P^(-1) Y(0)

= [ -10/3 -2/3; 1 1/3] [ e^(4t) 0; 0 e^(4t)] [ -1/2 1/2; 2 1] [5; 3]

= [ -5e^(4t) - 5e^(-t); 3e^(4t) - e^(-t)]

Therefore, the solution to the IVP is Y(t) = [ -5e^(4t) - 5e^(-t); 3e^(4t) - e^(-t)] with initial condition Y(0) = [5; 3].

Learn more about IVP at https://brainly.com/question/15082930

#SPJ11

Answer:

303.375 or 303 3/8

Step-by-step explanation:

First, we can split the polygon into three smaller shapes: a triangle, a big rectangle, and a small rectangle. We will call them A, B, and C.

A:

Length: 28.25 - (3 + 13) = 28.25 - 16 = 12.25 (12 1/4)

Height: 10 + 9 = 19

Area: (12.25 * 19) / 2 = 232.75 / 2 = 116.375 ft

B:

Length: 3 + 13 = 16

Width: 10

Area: 16 * 10 = 160 ft

C:

Length: 3

Width: 9

Area: 3 * 9 = 27 ft

Now we have to add all three digits:

116.375 + 160 + 27 = 303.375 or 303 3/8

-------------------------------------------------------------------------------------------------------------

Hope this helps :)

Sure, I can help with that. The problem is asking for the area of a polygon composed of two rectangles and a right triangle.

The area of a rectangle is given by the formula length * width, and the area of a right triangle is given by the formula 1/2 * base * height.

Let’s calculate the areas:

For the first rectangle with dimensions 9ft by 13ft, the area is 9 * 13 = 117 square feet.

For the second rectangle with dimensions 10ft by 8ft, the area is 10 * 8 = 80 square feet.

For the right triangle with dimensions 28ft by 4ft, the area is 1/2 * 28 * 4 = 56 square feet.

Adding these areas together gives the total area of the polygon:

117 + 80 + 56 = 253 square feet

So, the area of the polygon is 253 square feet.