find the partial sum s, of the arithmetic sequence that satisfies the given conditions.

Answers

Answer 1

We have the formula : n = (an - a1) / d + 1Sn = n / 2 (a1 + an)s = Sn - Sp where Sp is the sum of the first p terms of the sequence. In conclusion, finding the partial sum s, of the arithmetic sequence that satisfies the given conditions involves finding the first term, the common difference, and the number of terms in the sequence.

An arithmetic sequence is a sequence where every term has the same common difference, d. For instance, 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2. Each term in the sequence is found by adding the common difference to the previous term. The formula for the nth term, an, of an arithmetic sequence is given by: an = a1 + (n – 1)d .

Where a1 is the first term in the sequence and d is the common difference. Given an arithmetic sequence, we can find the sum of the first n terms using the formula: Sn = (n/2)(a1 + an)where Sn is the sum of the first n terms, a1 is the first term in the sequence, and an is the nth term in the sequence.

To find the partial sum, we need to know the first term, the common difference, and the number of terms in the sequence. We can then use the formula above to find the sum of the first n terms of the sequence. If we know the nth term of the sequence instead of the number of terms, we can use the formula for the nth term to find the number of terms, and then use the formula above to find the sum of the first n terms.

Thus, we have the formula : n = (an - a1) / d + 1Sn = n / 2 (a1 + an)s = Sn - Sp where Sp is the sum of the first p terms of the sequence. In conclusion, finding the partial sum s, of the arithmetic sequence that satisfies the given conditions involves finding the first term, the common difference, and the number of terms in the sequence.

To know more about Arithmetic  visit :

https://brainly.com/question/16415816

#SPJ11


Related Questions

D Question 30 A researcher hypothesizes that plants will be taller after being given plant food compared to before. Height is measured in centimeters. Which test BEST fits for this study? O independen

Answers

The test that best fits for this study is dependent samples t-test one-tailed test of significance

How to determine the test that best fits the study

Given that

The researcher wants to compare the heights of plant such that one set is hypothesized and the other set is not

The above scenario fit the description of a dependent samples t-test

This is so because it requires the use of an experimental variable and the control variable

i.e. one set of plant are hypothesized, while the others are not

Read more about test of hypothesis at

https://brainly.com/question/14701209

#SPJ4

Question

A researcher hypothesizes that plants will be taller after being given plant food compared to before. Height is measured in centimeters. Which test BEST fits for this study?

Group of answer choices

regression

dependent samples t-test one-tailed test of significance

independent samples t-test two-tailed test of significance

correlation with a two-tailed test of significance

There is no appropriate test for this scenario

ANOVA

correlation with a one-tailed test of significance

3. (10 points) Normal RV The IQ of a randomly chosen person is a normal random variable with μ = 100 and o= 15. You enter a room full of 20 randomly chosen people. a) What is the probability that at

Answers

The probability that at most two people have an IQ less than 90 is 0.8752.

We are given that the IQ of a randomly chosen person is a normal random variable with μ = 100 and σ = 15.

We need to find the probability that at most two people have an IQ less than 90.

The number of successes x, out of n trials, for binomial distribution follows a normal distribution with μ = np and σ = sqrt(npq), if n is large and p is not too close to 0 or 1.

The probability of getting an IQ less than 90 in a single trial is:

P(X < 90) =

P(Z < (90 - 100)/15)

= P(Z < -2/3) = 0.2525.

P(X ≤ 2)

= C(20, 0)(0.2525)^0(0.7475)^20 + C(20, 1)(0.2525)^1(0.7475)^19 + C(20, 2)(0.2525)^2(0.7475)^18≈ 0.8752

Summary: Given μ = 100 and σ = 15, we are to find the probability that at most two people have an IQ less than 90 in a room of 20 randomly chosen people. Using the normal distribution and the binomial distribution, we find that the probability is 0.8752.

Learn more about probability click here:

https://brainly.com/question/13604758

#SPJ11

X Given the triangle find the length of side a using the Law of Cosines. Round your * 52° 26 a final answer to 3 decimal places. Picture is not drawn to scale x= 24/
Given the triangle below, find t

Answers

we get,$$a ≈ 17.011$$Therefore, the length of side a is ≈ 17.011.Hence, option (A) is the correct answer.

The Law of Cosines states that in a triangle with sides of lengths "a," "b," and "c" and opposite angles "A," "B," and "C" respectively, the following equation holds:

[tex]c^2 = a^2 + b^2 - 2ab * cos(C)[/tex]

To find the length of side "a," you would rearrange the equation as follows:

[tex]a^2 = b^2 + c^2 - 2bc * cos(A)[/tex]

Then, take the square root of both sides to isolate "a":

[tex]a = √(b^2 + c^2 - 2bc * cos(A))[/tex]

Once you have the values for "b," "c," and angle "A," you can substitute them into the equation and calculate the length of side "a."

Please provide the values for "b," "c," and angle "A" in order for me to assist you further

learn more about  length here;

https://brainly.com/question/28816106?

#SPJ11

In the lifetime of an electronic product is the random variable
X~EXP(100),
Find 1,2,3
1. P(X>30)
2. P(X>110)
3. P(X>110|X>80)

Answers

So, P(X > 110 | X > 80) ≈ 0 (approximately zero, since [tex]e^_(-3000)[/tex] is extremely close to zero).

In this case, the lifetime of the electronic product is modeled by the exponential distribution with a rate parameter of λ = 100. Let's calculate the probabilities you requested:

1. P(X > 30) - This represents the probability that the lifetime of the electronic product exceeds 30 units.

Using the exponential distribution, the cumulative distribution function (CDF) is given by:

F(x) = [tex]1 - e^_(\sigma x)[/tex]

Substituting the given rate parameter λ = 100 and

x = 30 into the CDF formula:

P(X > 30) = 1 - F(30)

         = 1 - (1 - e^(-100 * 30))

         = 1 - (1 - e^(-3000))

         = e^(-3000)

So, P(X > 30) ≈ 0 (approximately zero, since [tex]e^_(-3000)[/tex] is extremely close to zero).

2. P(X > 110) - This represents the probability that the lifetime of the electronic product exceeds 110 units.

Using the same exponential distribution and CDF formula:

P(X > 110) = 1 - F(110)

          = [tex]1 -[/tex][tex](1 - e^_(-100 * 110))[/tex]

          =[tex]1 - (1 - e^_(-11000))[/tex]

          =[tex]e^_(-11000)[/tex]

So, P(X > 110) ≈ 0 (approximately zero, since e^(-11000) is extremely close to zero).

3. P(X > 110 | X > 80) - This represents the conditional probability that the lifetime of the electronic product exceeds 110 units given that it exceeds 80 units.

Using the properties of conditional probability, we have:

P(X > 110 | X > 80) = P(X > 110 and X > 80) / P(X > 80)

Since X is a continuous random variable,

P(X > 110 and X > 80) = P(X > 110), as X cannot simultaneously be greater than 110 and 80.

Therefore:

P(X > 110 | X > 80) = P(X > 110) / P(X > 80)

                   =[tex]e^_(-11000)[/tex][tex]/ e^_(-8000)[/tex]

                   =[tex]e^_(-11000 + 8000)[/tex]

                   =[tex]e^_(-3000)[/tex]

So, P(X > 110 | X > 80) ≈ 0 (approximately zero, since [tex]e^_(-3000)[/tex] is extremely close to zero).

To know more about  random variable visit:

https://brainly.com/question/30789758

#SPJ11

Suppose that a recent poll found that 62% of adults believe that the overall state of moral values is poor. Complete parts? (a) through? (c).

?(a) For 100 randomly selected? adults, compute the mean and standard deviation of the random variable? X, the number of adults who believe that the overall state of moral values is poor.The mean of X is nothing.

? (Round to the nearest whole number as? needed.)The standard deviation of X is nothing.

?(Round to the nearest tenth as? needed.)

?(b) Interpret the mean. Choose the correct answer below.

A.

For every 100?adults, the mean is the range that would be expected to believe that the overall state of moral values is poor.

B.

For every 100 ?adults, the mean is the minimum number of them that would be expected to believe that the overall state of moral values is poor.

C.

For every 100 ?adults, the mean is the number of them that would be expected to believe that the overall state of moral values is poor.

D.

For every 62?adults, the mean is the maximum number of them that would be expected to believe that the overall state of moral values is poor.?(c) Would it be unusual if 66 of the 100 adults surveyed believe that the overall state of moral values is? poor?

No

Yes

Answers

(a) The mean of X, the number of adults who believe that the overall state of moral values is poor, can be calculated using the formula for the mean of a binomial distribution. In this case, the probability of an adult believing that the overall state of moral values is poor is given as 0.62. So, the mean is calculated as follows:

Mean (μ) = n * p

where n is the number of trials (100 adults) and p is the probability of success (0.62).

μ = 100 * 0.62 = 62

The mean of X is 62.

The standard deviation of X can be calculated using the formula for the standard deviation of a binomial distribution:

Standard deviation (σ) = √(n * p * (1 - p))

σ = √(100 * 0.62 * (1 - 0.62)) ≈ 4.15

The standard deviation of X is approximately 4.15.

(b) The correct interpretation of the mean is C.

For every 100 adults, the mean is the number of them that would be expected to believe that the overall state of moral values is poor. In this case, the mean of 62 indicates that, on average, out of every 100 adults surveyed, approximately 62 of them would be expected to believe that the overall state of moral values is poor.

(c) To determine whether it would be unusual for 66 of the 100 adults surveyed to believe that the overall state of moral values is poor, we need to consider the concept of unusual or statistically significant values.

Since we know the mean (62) and standard deviation (approximately 4.15) of the distribution, we can calculate the z-score for 66 using the formula:

z = (x - μ) / σ

where x is the observed value (66), μ is the mean (62), and σ is the standard deviation (approximately 4.15).

z = (66 - 62) / 4.15 ≈ 0.964

Next, we can compare the calculated z-score to the standard normal distribution to determine if it is considered unusual. Assuming a significance level of 0.05 (commonly used), we look up the z-score in the standard normal distribution table or use a statistical calculator.

The z-score of 0.964 corresponds to a p-value of approximately 0.166, which is greater than 0.05. Therefore, it would not be considered unusual if 66 of the 100 adults surveyed believed that the overall state of moral values is poor.

In summary:

The mean of X, the number of adults who believe that the overall state of moral values is poor, is 62. The standard deviation is approximately 4.15.

For every 100 adults, the mean is the number of them that would be expected to believe that the overall state of moral values is poor. In this case, 62 adults, on average, would be expected to believe so.

C. It would not be considered unusual if 66 of the 100 adults surveyed believed that the overall state of moral values is poor, as the calculated z-score of 0.964 corresponds to a p-value greater than 0.05.

For more questions like Standard deviation click the link below:

https://brainly.com/question/23907081

#SPJ11

1.What is the probability of (A) if P(A ∩ B) =.20; P(A ∩ C)
=.16; and P(A ∩ D) =.11 and we assume "A" can occur simultaneously
only with "B,C,D"
2.In a venn diagram, the term "A U B" represents.

Answers

The probability of event A is 0.47.

In a Venn diagram, the term "A U B" represents the union of sets A and B.

What is the probability of event A?

To calculate the probability of event A (denoted as P(A)), sum up the probabilities of the individual intersections of A with B, C, and D.

P(A ∩ B) = 0.20

P(A ∩ C) = 0.16

P(A ∩ D) = 0.11

P(A) = P(A ∩ B) + P(A ∩ C) + P(A ∩ D)

P(A) = 0.20 + 0.16 + 0.11

P(A) = 0.47

In a Venn diagram, the term "A U B" represents the union of sets A and B or the set of all the elements that are present in either set A or set B or both.

"A U B" is read as "A union B" and is written as A ∪ B.

Learn more about probability at: https://brainly.com/question/24756209

#SPJ4

the ________________ test is akin to the independent samples t-test. group of answer choices

Answers

The answer we require is: The Mann-Whitney U test is akin to the independent samples t-test.

What is the independent t-test?

An Independent t-test (also known as an unpaired t-test or a two-sample t-test) is a statistical procedure that examines whether two populations have the same mean. This is done by comparing the means of two groups, which are typically independent samples. The independent samples t-test is used to compare the means of two groups when the samples are independent, have similar variances, and come from normal distributions. It is used to investigate the relationship between two continuous variables that are independent.

What is the Mann-Whitney U test?

The Mann-Whitney U test is a non-parametric test used to determine whether two independent samples are significantly different from each other. It is used to compare two independent groups when the dependent variable is continuous and the data are not normally distributed or when the data are ordinal.

The Mann-Whitney U test is also referred to as the Wilcoxon rank-sum test and is useful when the data is not normally distributed or when the sample sizes are small. The Mann-Whitney U test is akin to the independent samples t-test.

To know more about t-test, visit:

https://brainly.com/question/32576462

#SPJ11

Let n1=60, X1=30, n2=80, and X2=20. The estimated value of the
standard error for the difference between two population
proportions is
0.0154
0.0923
0.0.745
0.0807

Answers

The estimated value of the standard error for the difference between two population proportions is approximately 0.0665, which is closest to option (b) 0.0923.

The estimated value of the standard error for the difference between two population proportions can be calculated using the formula:

SE = sqrt[(p1 * (1 - p1)/n1) + (p2 * (1 - p2)/n2)]

where p1 is the sample proportion in the first group, p2 is the sample proportion in the second group, n1 is the sample size in the first group, and n2 is the sample size in the second group.

Using the given values:

p1 = X1/n1 = 30/60 = 0.5

p2 = X2/n2 = 20/80 = 0.25

n1 = 60

n2 = 80

SE = sqrt[(0.5 * (1 - 0.5)/60) + (0.25 * (1 - 0.25)/80)]

= sqrt[(0.125/60) + (0.1875/80)]

= sqrt[0.00208333 + 0.00234375]

= sqrt(0.00442708)

= 0.0665 (rounded to four decimal places)

Therefore, the estimated value of the standard error for the difference between two population proportions is approximately 0.0665, which is closest to option (b) 0.0923.

Learn more about  population from

https://brainly.com/question/25896797

#SPJ11

The random variable W = 6 X-4Y-2Z+9 where X, Y and Z are three random variables with X-N(2,2), Y-N(3,4) and Z-N(4,6). The expected value of W is equal to: Number

Answers

The expected value of W is equal to 1. the expected value of the sum of random variables is equal to the sum of their individual expected values.

To find the expected value of the random variable W, which is defined as W = 6X - 4Y - 2Z + 9, we can use the linearity of expectations.

The expected value of a constant multiplied by a random variable is equal to the constant multiplied by the expected value of the random variable. Additionally, the expected value of the sum of random variables is equal to the sum of their individual expected values.

Given that X follows a normal distribution with mean μ₁ = 2 and variance σ₁² = 2, Y follows a normal distribution with mean μ₂ = 3 and variance σ₂² = 4, and Z follows a normal distribution with mean μ₃ = 4 and variance σ₃² = 6, we can calculate the expected value of W as follows:

E[W] = 6E[X] - 4E[Y] - 2E[Z] + 9.

Using the properties of expectations, we substitute the means of X, Y, and Z:

E[W] = 6 * μ₁ - 4 * μ₂ - 2 * μ₃ + 9.

Evaluating the expression:

E[W] = 6 * 2 - 4 * 3 - 2 * 4 + 9.

Simplifying:

E[W] = 12 - 12 - 8 + 9.

E[W] = 1.

Therefore, the expected value of W is equal to 1.

Learn more about expected value here

https://brainly.com/question/24305645

#SPJ11

the default constructor should initialize the width, height, and length of a rectangle to 0.

Answers

The default constructor initializes the width, height, and length of a rectangle to 0 in a single line.

To implement a default constructor that initializes the width, height, and length of a rectangle to 0, you can define the constructor in the class as follows:

class Rectangle {

private:

 int width;

 int height;

 int length;

public:

 Rectangle() {

   width = 0;

   height = 0;

   length = 0;

 }

};

In the above code, the class Rectangle is defined with three private member variables: width, height, and length. The default constructor Rectangle() is declared and defined within the class. Inside the default constructor, the width, height, and length are set to 0 using assignment statements.

By defining this default constructor, whenever you create an instance of the Rectangle class without providing any arguments, the width, height, and length will automatically be initialized to 0.

To know more about default constructor,

https://brainly.com/question/32230146

#SPJ11

Use geometry to evaluate the following integral. ∫1 6 f(x)dx, where f(x)={2x 6−2x if 1≤x≤ if 2

Answers

To evaluate the integral ∫[1 to 6] f(x) dx, where f(x) = {2x if 1 ≤ x ≤ 2, 6 - 2x if 2 < x ≤ 6}, we need to split the integral into two parts based on the given piecewise function and evaluate each part separately.

How can we evaluate the integral of the given piecewise function ∫[1 to 6] f(x) dx using geometry?

Since the function f(x) is defined differently for different intervals, we split the integral into two parts: ∫[1 to 2] f(x) dx and ∫[2 to 6] f(x) dx.

For the first part, ∫[1 to 2] f(x) dx, the function f(x) = 2x. We can interpret this as the area under the line y = 2x from x = 1 to x = 2. The area of this triangle is equal to the integral, which we can calculate as (1/2) * base * height = (1/2) * (2 - 1) * (2 * 2) = 2.

For the second part, ∫[2 to 6] f(x) dx, the function f(x) = 6 - 2x. This represents the area under the line y = 6 - 2x from x = 2 to x = 6. Again, this forms a triangle, and its area is given by (1/2) * base * height = (1/2) * (6 - 2) * (2 * 2) = 8.

Adding the areas from the two parts, we get the total integral ∫[1 to 6] f(x) dx = 2 + 8 = 10.

Therefore, by interpreting the given piecewise function geometrically and calculating the areas of the corresponding shapes, we find that the value of the integral is 10.

Learn more about: Integral

brainly.com/question/31059545

#SPJ11

Gradebook Home > MAT120 43550 Spring2022 > Assessment Homework 6 Score: 12.9/31 9/15 answered. Question 12 < If a seed is planted, it has a 70% chance of growing into a healthy plant. If 11 seeds are

Answers

The probability that exactly 4 out of 7 seeds don't grow is 0.3241 or 32.41%.

To calculate the probability that exactly 4 out of 7 seeds don't grow, we can use the binomial probability formula.

The binomial probability formula is given by:

P(X = k) = C(n, k) [tex]p^k (1 - p)^{(n - k),[/tex]

where P(X = k) is the probability of exactly k successes (in this case, seeds not growing), n is the total number of trials.

In this case, n = 7 (seeds planted),

k = 4 (seeds not growing),

and p = 0.3 (probability of a seed not growing, which is 1 - 0.7).

Plugging in the values, we have:

P(X = 4) = C(7, 4)[tex](0.3)^4 (0.7)^{(7 - 4).[/tex]

C(7, 4) = = 7! / (4!3!) = (7 * 6 * 5) / (3 * 2 * 1) = 35.

P(X = 4) = 7! / (4!(7-4)!)  [tex](0.3)^4 (0.7)^3[/tex]

P(X = 4) = 0.3241.

Therefore, the probability that exactly 4 out of 7 seeds don't grow is 0.3241 or 32.41%.

Learn more about Binomial Distribution here:

https://brainly.com/question/29137961

#SPJ4

any or all questions pls thank you
Which of the following statements is true about the scatterplot below? X-Axis O The correlation between X and Y is negative. O The correlation between X and Y is positive. The relationship between X a

Answers

The statement that is true about the scatterplot is that the correlation between X and Y is negative.

In a scatter plot, the correlation between two variables can be identified by the direction and strength of the trend line. A trend line with a negative slope indicates that as the x-axis variable increases, the y-axis variable decreases, while a positive slope indicates that as the x-axis variable increases, the y-axis variable increases as well.

In the scatterplot given in the question, the trend line slopes downward to the right, which indicates a negative correlation between X and Y.

As the value of X increases, the value of Y decreases.

Therefore, the statement that is true about the scatterplot is that the correlation between X and Y is negative.

Summary: In the scatterplot given in the question, the correlation between X and Y is negative. The trend line slopes downward to the right, which indicates that as the value of X increases, the value of Y decreases.

Learn more about correlation click here:

https://brainly.com/question/28175782

#SPJ11

19. A population has a mean of 200 and a standard deviation of 50. Suppose a simple random sample of size 100 is selected and is used to estimate u. a. What is the probability that the sample mean wil

Answers

The probability that the sample mean will be less than or equal to a certain value can be calculated using the Central Limit Theorem, assuming the sample size is large enough.

In this case, a simple random sample of size 100 is selected from a population with a mean of 200 and a standard deviation of 50.

The Central Limit Theorem states that for a sufficiently large sample size, the distribution of the sample mean will be approximately normal, regardless of the shape of the population distribution.

The mean of the sample means will be equal to the population mean, and the standard deviation of the sample means, also known as the standard error, will be equal to the population standard deviation divided by the square root of the sample size.

In this case, the mean of the sample means will be equal to the population mean, which is 200. The standard deviation of the sample means, or the standard error, will be equal to the population standard deviation divided by the square root of the sample size, which is 50 divided by the square root of 100, resulting in 5.

To find the probability that the sample mean will be less than or equal to a certain value, we can use the standard normal distribution (Z-distribution) and the z-score formula.

The z-score is calculated by subtracting the population mean from the desired value and dividing it by the standard error. We can then look up the corresponding probability in the standard normal distribution table or use statistical software.

To know more about the Central Limit Theorem, refer here:

https://brainly.com/question/17092136#

#SPJ11

Family Income. Suppose you study family income in a random sample of 300 families. You find that the mean family income is $55,000; the median is $45,000; and the highest and lowest incomes are $250,000 and $2400, respectively. a. Draw a rough sketch of the income distribution, with clearly labeled axes. Describe the distribution as symmetric, left-skewed, or right-skewed. b. How many families in the sample earned less than $45,000? Explain how you know. c. Based on the given information, can you determine how many families earned more than $55,000? Why or why not?

Answers

a. The income distribution can be described as right-skewed. A rough sketch should show a longer tail on the right side of the distribution.

b. The number of families that earned less than $45,000 cannot be determined solely based on the given information. Additional information is needed.

c. The number of families that earned more than $55,000 cannot be determined solely based on the given information. Additional information is needed.

a. To draw a rough sketch of the income distribution, we need to create a histogram or a frequency plot. The x-axis should represent income values, and the y-axis should represent the frequency or count of families falling into each income range.

Since the median ($45,000) is less than the mean ($55,000), and the highest income is significantly higher than the mean, the distribution can be described as right-skewed. The right tail of the distribution would extend further compared to the left tail.

b. The information provided does not specify the shape of the income distribution or the proportion of families earning less than $45,000. Therefore, without additional information such as frequency counts or relative proportions, it is not possible to determine the exact number of families that earned less than $45,000.

c. Similarly, without more information about the shape of the income distribution and the proportion of families earning more than $55,000, we cannot determine the exact number of families that earned more than $55,000. Additional data on the income distribution or relevant summary statistics would be required to make a conclusive determination.

To learn more about frequency plot visit:

brainly.com/question/21244670

#SPJ11

calculate the coefficient of variation for a sample of cereal boxes with a mean weight of 340 grams and a standard deviation of 5.2 grams.? 0.15% A
1.53% B
15.29% C
0.65% D

Answers

The coefficient of variation (CV) is a measure of relative variability and is calculated by dividing the standard deviation by the mean, and then multiplying by 100 to express it as a percentage.

In this case, the mean weight is 340 grams, and the standard deviation is 5.2 grams.

CV = (Standard Deviation / Mean) * 100

CV = (5.2 / 340) * 100

CV ≈ 1.53%

Therefore, the correct answer is option B: 1.53%.

To know more about Mean visit-

brainly.com/question/26062194

#SPJ11

what type of variance results when the actual fixed overhead costs incurred are greater

Answers

When the actual fixed overhead costs incurred are greater than the budgeted fixed overhead costs, it results in unfavorable variance.

Unfavorable variance is a type of variance that occurs when the actual results of a business operation are worse than the planned or expected results. In the context of fixed overhead costs, unfavorable variance means that the actual costs incurred are higher than what was budgeted or expected.
There are several factors that can contribute to unfavorable variance in fixed overhead costs. These include unexpected increases in expenses, higher costs of inputs or resources, inefficiencies in production processes, or changes in market conditions. Unfavorable variance in fixed overhead costs indicates that the company has incurred higher expenses than anticipated, which can impact profitability and overall financial performance.
Monitoring and analyzing unfavorable variance in fixed overhead costs is important for businesses to identify the reasons behind the deviation from the budgeted costs. This allows management to take corrective actions, such as implementing cost-saving measures, improving efficiency, or adjusting future budgets to align with the actual costs.

Learn more about variances here
https://brainly.com/question/31432390



#SPJ11

find the area of the region that lies inside the curve r = 1 costheta and outside the curve r = 2-costheta

Answers

The area of the region that lies inside the curve r = 1 cosθ and outside the curve r = 2-cosθ is 6π square units.

To find the area of the region that lies inside the curve r = 1 cosθ and outside the curve r = 2-cosθ, we need to follow the given steps.

Step 1: Determine the points of intersection of the curves

To determine the points of intersection of the curves, we equate the two curves and solve for θ.

r = 1 cosθ and r = 2-cosθ1

cosθ= 2-cosθ

2 cosθ = 2cosθ = 2/2cosθ

a = 1θ = π/4, 7π/4

So, the curves intersect at the angles θ = π/4 and θ = 7π/4.

Step 2: Determine the area bounded by the two curves

To determine the area bounded by the two curves, we need to integrate the difference of the outer curve and the inner curve with respect to θ between the limits π/4 and 7π/4.

∫(2-cosθ)² - (1 cosθ)² dθ, π/4 ≤ θ ≤ 7π/4

Using the formula (cosθ)² = (1 + cos2θ)/2, we can simplify the expression:

(2-cosθ)² - (1 cosθa)² = (4-4cosθ + cos²θ) - (1-2cosθ + cos²θ)= 3 - 2cosθ

The integral becomes

∫(3-2cosθ) dθ, π/4 ≤ θ ≤ 7π/4

= 3θ - 2 sinθ, π/4 ≤ θ ≤ 7π/4

= 3(7π/4) - 2 sin(7π/4) - 3(π/4) + 2 sin(π/4)

= 21π/4 + √2 + 3π/4 - √2= 6π

So, the area of the region that lies inside the curve r = 1 cosθ and outside the curve r = 2-cosθ is 6π square units.

To know more about curve visit:

https://brainly.com/question/32496411

#SPJ11

the senate minority leader that year was 66 years old, while the house of representatives minority leader was 76 years old. relative to their group, which leader was older?

Answers

The answer is indeterminate.

The Senate minority leader and the House of Representatives minority leader were 66 years old and 76 years old, respectively.

Now, to determine which leader was older relative to their group, we must compare their ages to the ages of the members of their respective groups.

Since we do not have any information about the ages of the other members of the Senate or the House of Representatives, we cannot definitively say which leader was older relative to their group.

Therefore, the answer is indeterminate.

Know more about Senate  here:

https://brainly.com/question/29618633

#SPJ11

Based on the data shown below, calculate the regression line (each value to two decimal places) X + y = y 7.8 7.9 5.6 7.2 6.5 7.3 11.2 10 9 11 9.4 12 11.1 13 11.7 14 12.4 15 10.7 16 14.6 17 11.6 Submi

Answers

The regression line for the given data is y = 0.7916x + 1.470

Let us calculate the means of X and y:

Mean of X (X) = (3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 + 16 + 17) / 15

= 10

Mean of y (Y) = (7.8 + 7.9 + 5.6 + 7.2 + 6.5 + 7.3 + 11.2 + 9 + 9.4 + 11.1 + 11.7 + 12.4 + 10.7 + 14.6 + 11.6) / 15

=9.3867

The deviations from the means (x - X) and (y -Y):

x deviations: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7

y deviations: -1.5867, -1.4867, -3.7867, -2.1867, -2.8867, -2.0867, 1.8133, -0.3867, 0.0133, 1.7133, 2.3133, 2.9633, 1.3133, 5.2133, 2.2133

The sum of products of the deviations:

Sum of (x deviations × y deviations) = (-7× -1.5867) + (-6 × -1.4867) + (-5 × -3.7867) + (-4 × -2.1867) + (-3 × -2.8867) + (-2 × -2.0867) + (-1×1.8133) + (0 × -0.3867) + (1 × 0.0133) + (2 × 1.7133) + (3 × 2.3133) + (4×2.9633) + (5× 1.3133) + (6×5.2133) + (7×2.2133) = 110.82

Sum of (x deviations)²= (-7)² + (-6)² + (-5)² + (-4)² + (-3)² + (-2)² + (-1)² + 0² + 1² + 2² + 3² + 4² + 5² + 6² + 7² = 140

Now the slope (m) of the regression line:

m = (Sum of (x deviations × y deviations)) / (Sum of (x deviations)²)

= 110.82 / 140

= 0.7916

The y-intercept (b) of the regression line:

b = Y- (m × X)

= 9.3867 - (0.7916 × 10)

= 9.3867 - 7.916 =1.470

The equation of the regression line is y = mx + b, where m is the slope and b is the y-intercept.

Substituting the values we calculated:

y = 0.7916x + 1.470

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ4

2 3 21-30-8 3418-40.6 50.4-60.2 60.2 Problem # 2: Find the population mean, median, mode, variance and standard deviation for the set of data: 13, 7, 21, 4, 15, 23, 7, 6. Show your work step by step.

Answers

The population mean of the given data set is 11.375, the median is 8.5, the mode is 7, the variance is 43.75, and the standard deviation is approximately 6.612.

To find the population mean, we sum up all the values in the data set and divide by the total number of values.

Mean:

(13 + 7 + 21 + 4 + 15 + 23 + 7 + 6) / 8 = 11.375

To find the median, we arrange the data set in ascending order and find the middle value. If there are an even number of values, we take the average of the two middle values.

Median:

Arranging the data set in ascending order: 4, 6, 7, 7, 13, 15, 21, 23

Middle values: 7, 13

Taking the average: (7 + 13) / 2 = 8.5

The mode is the value that appears most frequently in the data set.

Mode:

The value 7 appears twice, which is more than any other value in the data set. So, the mode is 7.

To find the variance, we calculate the average of the squared differences between each value and the mean.

Variance:

[(13 - 11.375)² + (7 - 11.375)² + (21 - 11.375)² + (4 - 11.375)² + (15 - 11.375)² + (23 - 11.375)² + (7 - 11.375)² + (6 - 11.375)²] / 8 = 43.75

The standard deviation is the square root of the variance.

Standard deviation:

√(43.75) ≈ 6.612

To know more about variance, refer here:

https://brainly.com/question/29253308#

#SPJ11

find the radius of convergence, r, of the series. [infinity] n2xn 6 · 12 · 18 · ⋯ · (6n) n = 1 r = find the interval, i, of convergence of the series. (enter your answer using interval notation.) i =

Answers

The radius of convergence is r = 1/6 and the interval of convergence is [-1/6, 1/6].

The given series is as follows:

[infinity] n2xn 6 · 12 · 18 · ⋯ · (6n) n = 1

To find the radius of convergence, r:

Let's use the ratio test to calculate the radius of convergence:

lim n→∞ |(an+1)/(an)|

= lim n→∞ |(n+1)2x^(n+1)6·12·18·…·(6n+6)n+1 / n2xn6·12·18·…·(6n)n

|lim n→∞ |(n+1)/n| * |x| * (6n+6)/(6n)

lim n→∞ |1 + 1/n| * |x| * (n+1) / 6

The above limit will converge only when the product is less than 1; this is the condition of the ratio test:

lim n→∞ |1 + 1/n| * |x| * (n+1) / 6 < 1

We can find the radius of convergence, r, by solving the above inequality, considering n→∞:r > 0 ; otherwise, the series won't converge.r < ∞ ; otherwise, the series will converge for every value of x.The inequality can be rearranged to isolate the variable r:

lim n→∞ |1 + 1/n| * (n+1) / 6 < 1 / |x|r > lim n→∞ 6 / [(n+1) * |1 + 1/n|]

The limit will converge to 6/1=6; therefore, 6 < 1 / |x|.

The radius of convergence is r = 1/6.The interval of convergence i can be calculated by testing the convergence of the endpoints of the interval of radius r. The endpoints of the interval of convergence are x = -r and x = r, which are x = -1/6 and x = 1/6.

At these two endpoints, the series will converge, so the interval of convergence i is [-1/6, 1/6].

Therefore, the radius of convergence is r = 1/6 and the interval of convergence is [-1/6, 1/6].

To know more about convergence visit:

https://brainly.com/question/29258536

#SPJ11

Can
I please have help with Part F
In fitting a least squares line to n=7 data points, the quantities in the table to the right were computed. Complete parts a through f. a. Find the least squares line. y=-3.279 +0.897 x (Round to thre

Answers

The equation of the least squares line is:

y = 0.897x - 3.279

Now, the least squares line, we need to calculate the slope and y-intercept of the line that minimizes the sum of squared residuals between the line and the given data points.

Let's assume that we have a set of n data points (x₁, y₁), (x₂, y₂), ..., (xn, yn) that we want to fit a line to.

We can calculate the slope of the least squares line as:

b = [nΣ(xiyi) - ΣxiΣyi] / [nΣ(xi²) - (Σxi)²]

We can calculate the y-intercept of the least squares line as:

a = (Σyi - bΣxi) / n

Now, let's use these formulas to calculate the slope and y-intercept for the given equation,

⇒ y = -3.279 + 0.897x.

From this equation, we can see that the slope is 0.897 and the y-intercept is -3.279.

Therefore, the equation of the least squares line is:

y = 0.897x - 3.279

Learn more about the equation of line visit:

https://brainly.com/question/18831322

#SPJ4

please help
Given a normal distribution with µ =4 and a -2, what is the probability that Question: Between what two X values (symmetrically distributed around the mean) are 95 % of the values? Instructions Pleas

Answers

Approximately 95% of the values in a normal distribution with a mean of 4 and a standard deviation of 2 fall between X ≈ 0.08 and X ≈ 7.92.

Let's follow the instructions step by step:

1. Draw the normal curve:

                            _

                           /   \

                          /     \

2. Insert the mean and standard deviation:

  Mean (µ) = 4

 

Standard Deviation (σ) = -2 (assuming you meant 2 instead of "a -2")

                    _

                   /   \

                  /  4  \

3. Label the area of 95% under the curve:

                     _

                   /   \

                  /  4  \

                 _________________

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |                 |

                |_________________|

4. Use Z to solve the unknown X values (lower X and Upper X):

We need to find the Z-scores that correspond to the cumulative probability of 0.025 on each tail of the distribution. This is because 95% of the values fall within the central region, leaving 2.5% in each tail.

Using a standard normal distribution table or calculator, we can find that the Z-score corresponding to a cumulative probability of 0.025 is approximately -1.96.

To find the X values, we can use the formula:

X = µ + Z * σ

Lower X value:

X = 4 + (-1.96) * 2

X = 4 - 3.92

X ≈ 0.08

Upper X value:

X = 4 + 1.96 * 2

X = 4 + 3.92

X ≈ 7.92

Therefore, between X ≈ 0.08 and X ≈ 7.92, approximately 95% of the values will fall within this range in a normal distribution with a mean of 4 and a standard deviation of 2.

To know more about the Z-scores refer here :

https://brainly.com/question/30557336#

#SPJ11

Complete question :

Given a normal distribution with µ =4 and a -2, what is the probability that Question: Between what two X values (symmetrically distributed around the mean) are 95 % of the values? Instructions Please don't simply state the results. 1. Draw the normal curve 2. Insert the mean and standard deviation 3. Label the area of 95% under the curve 4. Use Z to solve the unknown X values (lower X and Upper X)

answer all of fhem please
Mr. Potatohead Mr. Potatohead is attempting to cross a river flowing at 10m/s from a point 40m away from a treacherous waterfall. If he starts swimming across at a speed of 1.2m/s and at an angle = 40

Answers

Mr. Potatohead will be carried downstream by 10 × 43.5 = 435 meters approximately.

Given, Velocity of water (vw) = 10 m/s Velocity of Mr. Potatohead (vp) = 1.2 m/s

Distance between Mr. Potatohead and the waterfall (d) = 40 m Angle (θ) = 40

The velocity of Mr. Potatohead with respect to ground can be calculated by using the Pythagorean theorem.

Using this theorem we can find the horizontal and vertical components of the velocity of Mr. Potatohead with respect to ground.

vp = (vpx2 + vpy2)1/2 ......(1)

The horizontal and vertical components of the velocity of Mr. Potatohead with respect to ground are given as,

vpx = vp cos θ

vpy = vp sin θ

On substituting these values in equation (1),

vp = [vp2 cos2θ + vp2 sin2θ]1/2

vp = vp [cos2θ + sin2θ] 1/2

vp = vp

Therefore, the velocity of Mr. Potatohead with respect to the ground is 1.2 m/s.

Since Mr. Potatohead is swimming at an angle of 40°, the horizontal component of his velocity with respect to the ground is,

vpx = vp cos θ

vpx = 1.2 cos 40°

vpx = 0.92 m/s

As per the question, Mr. Potatohead is attempting to cross a river flowing at 10 m/s from a point 40 m away from a treacherous waterfall.

To find how far Mr. Potatohead is carried downstream, we can use the equation, d = vw t,

Where, d = distance carried downstream vw = velocity of water = 10 m/sand t is the time taken by Mr. Potatohead to cross the river.

The time taken by Mr. Potatohead to cross the river can be calculated as, t = d / vpx

Substituting the values of d and vpx in the above equation,

we get t = 40 / 0.92t

≈ 43.5 seconds

Therefore, Mr. Potatohead will be carried downstream by 10 × 43.5 = 435 meters approximately.

To know more about Pythagorean theorem visit:

https://brainly.com/question/14930619

#SPJ11

How many edges are there in the complete graph, Kn? • N(N+1)/2 • N(N-1)/2 (N2+1)/2 • (N2-1)/2

Answers

The formula for the number of edges in a complete graph with n vertices is given by E= (n * (n-1))/2. We can simplify this expression as follows:E = (n2 - n)/2. So, the answer to the question is (N2 - 1)/2.

In a complete graph, each vertex is connected to all other vertices. Therefore, to find the number of edges in a complete graph, Kn, we need to consider the number of ways of choosing two vertices from the set of n vertices and connecting them.So, the formula for the number of edges in a complete graph with n vertices is given by E= (n * (n-1))/2. We can simplify this expression as follows:E = (n2 - n)/2So, the answer to the question is (N2 - 1)/2. Therefore, the correct option is (D).Answer in 120 wordsA complete graph is one in which each pair of distinct vertices is connected by a unique edge. The number of edges in a complete graph is determined by the number of vertices in the graph. To find the number of edges in a complete graph with n vertices, we must first consider the number of ways to choose two vertices from the set of n vertices. After that, we must connect those two vertices.

Each pair of vertices produces an edge in a complete graph, and since the edges are undirected, we must divide by two to avoid double-counting. The formula for the number of edges in a complete graph with n vertices is given by E= (n * (n-1))/2. We can simplify this expression as follows:E = (n2 - n)/2. So, the answer to the question is (N2 - 1)/2.

To know more about edges visit:-

https://brainly.com/question/2272331

#SPJ11

Problem # 6: (15pts) A batch of 30 injection-molded parts contains 6 parts that have suffered excessive shrinkage. a) If two parts are selected at random, and without replacement, what is the probabil

Answers

A batch of 30 injection-molded parts contains 6 parts that have suffered excessive shrinkage. a) If two parts are selected at random, and without replacement, what is the probability that both parts have suffered excessive shrinkage.

If two parts are selected at random, and without replacement, what is the probability that neither part has suffered excessive shrinkage?Part a)To calculate the probability that both parts have suffered excessive shrinkage, we need to calculate the probability of the first part having excessive shrinkage and the second part having excessive shrinkage.The probability of selecting a part with excessive shrinkage on the first draw is 6/30, or 0.2 (20%). Once that part is removed, there are 5 parts with excessive shrinkage out of 29 remaining parts.

Therefore, the probability of selecting a second part with excessive shrinkage is 5/29. To calculate the probability of both events happening, we can multiply the probabilities: 0.2 * 5/29 = 0.03448, which rounds to 0.034. Therefore, the probability of both parts having suffered excessive shrinkage is approximately 0.034.Part b)To calculate the probability that neither part has suffered excessive shrinkage, we need to calculate the probability of the first part not having excessive shrinkage and the second part not having excessive shrinkage.

To know more about excessive visit:

https://brainly.com/question/30107804

#SPJ11

You are told that the following values represent four different correlation coefficients, r, labelled A to D as follows: A = -0.95 B = -0.3 C = 0.90 D = -0.88 Which of the following statements is corr

Answers

The correct statement is that there is a strong negative linear relationship between the variables for correlation coefficients A and D.

Based on the given correlation coefficients:

A = -0.95

B = -0.3

C = 0.90

D = -0.88

The correct statement would be:

Statement: "There is a strong negative linear relationship between the variables."

This statement is true for coefficient A (-0.95) and D (-0.88) because they have negative correlation coefficients. Negative correlation indicates that as one variable increases, the other variable tends to decrease in a linear fashion. The strength of the relationship is indicated by the absolute value of the correlation coefficient. In this case, both A and D have strong negative correlations.

Coefficients B and C do not indicate a strong negative linear relationship. B (-0.3) represents a weak negative correlation, and C (0.90) represents a strong positive correlation.

Learn more about correlation coefficients here:

https://brainly.com/question/17924779

#SPJ11

Suppose there are four boxes which look the same on the outside but each of them has a different number of black and white balls inside. The number of balls varies according to the following chart Box # of Black # of White 1 0 2 2 2 1 3 1 3 4 4 1 In our experiment, a box is first picked at random and then a ball is withdrawn, its color thus noted. 1) What is the probability of choosing a black ball out of: a) Box 1? b) Box 2? c) Box 3? d) Box 4?

Answers

a) The probability of choosing a black ball from Box 1 is 0 since there are no black balls in Box 1.

b) The probability of choosing a black ball from Box 2 is 2/3 since there are 2 black balls out of a total of 3 balls in Box 2.

c) The probability of choosing a black ball from Box 3 is 1/4 since there is 1 black ball out of a total of 4 balls in Box 3.

d) The probability of choosing a black ball from Box 4 is 1/5 since there is 1 black ball out of a total of 5 balls in Box 4.

To calculate the probability of choosing a black ball from each box, we need to divide the number of black balls in each box by the total number of balls in that box.

a) Box 1: According to the chart, Box 1 contains 0 black balls. Therefore, the probability of choosing a black ball from Box 1 is 0.

b) Box 2: Box 2 contains 2 black balls and 1 white ball, totaling 3 balls. The probability of choosing a black ball from Box 2 is calculated as 2 (number of black balls) divided by 3 (total number of balls) which equals 2/3.

c) Box 3: In Box 3, there is 1 black ball and 3 white balls, making a total of 4 balls. The probability of choosing a black ball from Box 3 is calculated as 1 (number of black balls) divided by 4 (total number of balls) which equals 1/4.

d) Box 4: Box 4 contains 1 black ball and 4 white balls, totaling 5 balls. The probability of choosing a black ball from Box 4 is calculated as 1 (number of black balls) divided by 5 (total number of balls) which equals 1/5.

The probabilities of choosing a black ball from each box are as follows: a) Box 1: 0, b) Box 2: 2/3, c) Box 3: 1/4, and d) Box 4: 1/5. These probabilities are derived by dividing the number of black balls in each box by the total number of balls in that box.

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ11

Calculate the following for the given frequency
distribution:
Data
Frequency
40 −- 46
11
47 −- 53
21
54 −- 60
10
61 −- 67
11
68 −- 74
8
75 −- 81
7
Sample Mean =
Sampl

Answers

Frequency Distribution of data is an arrangement of data into groups called classes along with their corresponding frequencies or counts.

The sample mean is the arithmetic average of a sample and is one of the most commonly used measures of central tendency.

Then the arithmetic mean of the given distribution can be found out as follows:

Given frequency distribution: Class Interval (X)  Frequency (f) 40-46  11 47-53  21 54-60  10 61-67  11 68-74  8 75-81  7Sample mean = [tex]\frac{\sum fx}{\sum f}[/tex]

we need to calculate mid-points of the given intervals;

Mid-point of 40-46 = (40+46)/2 = 43Mid-point of 47-53 = (47+53)/2 = 50Mid-point of 54-60 = (54+60)/2 = 57Mid-point of 61-67 = (61+67)/2 = 64Mid-point of 68-74 = (68+74)/2 = 71Mid-point of 75-81 = (75+81)/2 = 78

Now, we need to calculate the product of mid-point and frequency and sum it up.

Let us tabulate the values:Frequencies(X)  Frequency (f)  FX  43  11  473  50  21  1050  57  10  570  64  11  704  71  8  568  78  7  546Total  68  3911

Now, Sample Mean = [tex]\frac{\sum fx}{\sum f}[/tex]= [tex]\frac{3911}{68}[/tex]= 57.515Hence, the Sample mean of the given frequency distribution is 57.515.

To know more about Frequency Distribution visit

 https://brainly.com/question/30371143

 #SPJ11

Other Questions
The management of the Badger's Drift Hotel are interested in evaluating their guests' perceptions of the quality of their experience with the hotel. The primary objective of this is to identify whether any improvements could be made to the services they provide. The hotel manager has developed the following draft questionnaire (See ATTACHMENT 1) and has asked you to advise her on any areas of the questionnaire that could be improved. Your task is to evaluate the questionnaire in ATTACHMENT 1. Specifically, you should clearly (a) highlight any specific problems, and (b) provide specific recommendations on how you would address those problems (e.g. by indicating how you would rewrite the question). Your evaluation should clearly note the question that requires attention and the specific part of that question (e.g., wording, response format, layout, etc.) that is the problem. This should be directly followed by a specific recommendation for addressing the problem related to that question. You should follow this format for each issue identified. Marks will be allocated for each valid problem identified and the quality of recommended action to resolve the problem. Marks will be equally allocated to identification of problems (10 marks), and specific recommendations (10 marks). 1.A shortage results when:A - there is excess supply without any price controlsB - a price floor is imposed (NOT this one)C - a price floor is imposed but is not bindingD - a price ceiling is imp A frequent complaint made by parents about communication with teachers is thata. they are not notified about meetings until the last minute.b. teachers interrupt them at work to ask questions about their child's routine.c. they only hear from school personnel when their child has misbehaved.d. teachers confide in other family members without permission. Cuantas permutaciones pueden hacerse con la palabra columna Attempt in Progress On November 30, capital balances are Daniel $301000, Ellis $248000 and Gise $248000. The income ratios are 20%, 20% and 60%. respectively. Daniel decides to retire from the partnership. The partnership pays Daniel $348000 cash for her partnership interest. After Daniel's retirement, what is the balance of Ellis's capital account? O $236250 O $238600 O $248000 O $324500Previous question Alpha Ltd acquired 30% of the voting shares of Beta Ltd on 1 July 2021 for $200 000. This acquisition resulted in Alpha Ltd having significant influence over Beta Ltd. At the date of acquisition, the shareholder's equity of Beta is as follows: Share capital 350 000 Retained profits 50 000 400 000 The following information relates to Beta Ltd as at 30 June 2022, the end of financial year FY2022: Profit for FY2022 100 000 60 000 Dividend paid out of the profit of FY2022 Asset revaluation reserve 20 000 Additional information: Mu Ltd is 80% owned by Alpha Ltd and is Alpha's subsidiary. During FY2022, Beta sold $100 000 of inventories to Mu Ltd and made profit of $50 000. As at 30 June 2022, 10% of the inventories were still held by Mu Ltd. Required: a) Prepare journal entries for Alpha Ltd in FY2022 to account for its investment in Beta Ltd using the Equity Method. Use the Reclassification Method to account for the profit and dividends that Alpha shares from Beta. Note 1) Use the provided journal entry template to enter your answer. 2) Workings/calculations or narrations are NOT required. 3) The template should provide enough space. However, if you find the space is insufficient in the template or encounter a table formatting issue, write your journal entries below the template and ensure labelling DR or CR. b) Describe the criteria used to identify subsidiaries and the criteria used to identify associates. Thirty percent of all resumes received by a corporation for a management position are from recent college graduates. Eighteen resumes were received on a particular day. (a) What is the probability tha a. What are the ways to debunk a myth about Moon or the stars b. Why is it important to debunk myths associated with Moon and stars as output and employment contracted during the early 1930s, policy makers An ultracentrifuge accelerates from rest to 9.97 X 105 rpm in 1.51 min. What is its angular acceleration in radians per second squared? angular acceleration: radls? What is the tangential acceleration of a point 8.90 cm from the axis of rotation? tangential acceleration: m/s? What is the radial acceleration in meters per second squared and in multiples of g of this point at full revolutions per minute? radial acceleration: m/s? radial acceleration in multiples of g: Can you please explain why it is hard for Apple companies toreach their unit sales target every year and how they they cansolve this issue strategically? can you please explain in 2pages Plotting points in R3 For each point P(x, y, z) given below, let A(x, y, 0), B(x, 0, z), and Clo, y, z) be points in the xy-, xz-, and yz-planes, respectively. Plot and label the points A, B, C, and P in R3. 13. a. P(2, 2, 4) b. P(1, 2,5) c. P(-2,0,5) 14. a. P(-3,2, 4) b. P(4, -2, -3) c. P(-2, -4,-3) which river is shown on this map? responses the shimanto river the shimanto river the huang he river the huang he river the yangtze river the yangtze river the naktong river a nurse is preparing to administer acyclovir 5mg/kg IV bolus every 8 hr to a client who weighs 75lb. How many mg should the nurse administer per dose? what is it called when a district has no sitting legislator running for reelection? The cubs of spotted hyenas often begin fighting within moments of birth, and often one hyena cub dies. The mother hyena does not interfere. How could such a behavior have evolved? For instance: a. From the winning sibling's point of view, what must B (benefit of siblicide) be, relative to C (cost of siblicide), to favor the evolution of siblicide? b. From the parent's point of view, what must B be, relative to C, for the parent to watch calmly rather than interfere? c. In general, when would you expect parents to evolve "tolerance of siblicide" (watching calmly while siblings kill each other without interfering). What is the process of estimating the cost of a project? 7. A 950 kg car accelerates from rest to 27 in 4.5 s. What is the net force acting on the car? hello please show all workand solutions, formulas etc. please try yo answer asap for hugethumbs up!12. A 2.5 x 108 Hz x-ray photon strikes a metal foil and frees an electron. After the collision a lower energy 2.3 x 1018 Hz x-ray photon emerges. What is the speed of the electron? [P4] .The ledger of Swifty Rental Agency on March 31 of the current year includes the following selected accounts before adjusting entries have been preparedDebitCreditPrepaid Insurance$1,968Supplies2,050Equipment24,600Accumulated Depreciation-Equipment$58,172Notes Payable18,030Unearned Rent Revenue7,380Rent Revenue64,620Interest Expense-0-Salaries and Wages Expense13,670An analysis of the accounts shows the following1. The equipment depreciates $259 per month.2. One-third of the unearned rent was earned as revenue during the quarter3. The interest of $520 is accrued on the notes payable.4. Supplies on hand total $640.5. The insurance expires at the rate of $279 per month.Prepare the adjusting entries at March 31, assuming that adjusting entries are made quarterly. Additional accounts are Depreciation Expense, Insurance Expense, Interest Payable, and Supplies Expenses. (Credit account titles are automatically indented when the amount is entered. Do not indent manually. If no entry is required, select "No entry" for the account titles and enter 0 for the amounts.)