Five disadvantages of desktop publishing software​

Answers

Answer 1

Five disadvantages of desktop publishing software​ are: Steep getting to know curve , Cost , System requirements , Compatibility troubles, Limited collaboration features.

Steep getting to know curve: Desktop publishing software regularly has a complex interface and a huge variety of capabilities, main to a steep learning curve for novices. Mastering the software and using its full potential might also require tremendous time and effort.

Cost: Many expert desktop publishing software alternatives include a hefty charge tag, making them much less handy for people or small groups with constrained budgets. The initial funding in software program licenses can be substantial.

System requirements: Desktop publishing software can be resource-extensive, requiring effective hardware and adequate storage space. Outdated or low-performance computer systems can also struggle to run the software smoothly, necessitating luxurious upgrades.

Compatibility troubles: Documents created with precise desktop publishing software program formats might not be fully well suited with other software program or platforms. This can cause problems when sharing files with customers, collaborators, or printing offerings.

Limited collaboration features: While computing device publishing software allows man or woman creativity, it could lack robust collaboration equipment. Simultaneous modifying, model control, and actual-time collaboration functions usually discovered in cloud-based solutions are regularly limited or absent, hindering collaborative workflows.

These negative aspects highlight the capability demanding situations customers may additionally come across while operating with computing device publishing software, and it is crucial to weigh them against the unique desires and goals of the mission.

Read more about desktop at:

https://brainly.com/question/3365344


Related Questions

How much pressure (psi) is being produced on the interior walls of a piston that has a(n) 5 in. diameter that is having 31 lbs. of force being applied to it?

Round your answer to the nearest tenth (0.0) and DO NOT include units in the answer.

Answers

Note that the pressure   being produced on the interior walls of the piston is approximately 1.973 psi.

How is this so  ?

Given

Force = 31 lbs

Diameter = 5 in

First, calculate the area of the piston.

The formula for the area of a circle is.

Area = π * r²

Radius = Diameter / 2

Radius = 5 in / 2 = 2.5 in

Area = π * (2.5)²

Next,  calculate the pressure

Pressure = 31 lbs / (π * (2.5)²)

Pressure ≈ 1.973

Thus, it is correct to state that the pressure being produced on the interior walls of the piston is approximately 1.973 psi.

Learn more about Pressure at:

https://brainly.com/question/28012687

#SPJ1

A hydraulic press must be used to press-fit two components together in an assembly process. The system must generate at least 3453 lb. of force to perform the press fit. The piston at the input cylinder is pushed with a force of 723 lbs. and has an area of 33.7 in.2. The output can use up to 15 cylinders that are each 33.7 in.2.

How many output cylinders must be incorporated into the design?

Answers

Note that 5 output cylinders must be incorporated into the design.

Why is this so ?

The mechanical advantage   of the system is the ratio of the output force to the inputforce. The mechanical advantage of the system is given by

MA = Fout / Fin

where

MA = mechanical advantage

Fout = output force

Fin = input force

MA = 3453/ 723 = 4.77

The area of the output cylinders is 33.7 in.2. The number of output cylinders is given by

n = Aout / Apiston

where

n = number of output cylinders

Aout = area of the output cylinders

Apiston = area of the piston at the input cylinder

hence,

The number of output cylinders must be at least 4.77 / 1 = 4.77. Since the number of output cylinders must be an integer, the number of output cylinders must be 5.

Larn more about output cylinders;
https://brainly.com/question/14936605
#SPJ1

Other Questions
create a matlab function named fourser that is invoked to provide the coefficients of the fourier series up to the user-defined nth value. specifically, the function header should have a form PLEASE HURRYYY!What is the main mechanism for bacteria reproduction? find the volume of the solid obtained by rotating the region bounded by the curves y=x2,x=2,x=5,andy=0 about the line x=8. What is the most accurate statement about grant proposals?a) Funds received through a grant proposal can be used for any purpose, not just those outlined in the proposal.b) Grant money received must be repaid.c) Grants are often made to the U.S. government, private foundations, and public corporations.d) Skilled grant writers are among the most in-demand professionals today. . let g be the function given by 2 kx , where k is a constant. for what value of k does g have a critical point at x gx xe 2 ? 3 Which of the following is not a characteristic of the solid state?a. particles are moving very fastb. has a definite volumec. particles are close togetherd. has a definite shapee. particles are in fixed positions 5. Find how many solutions there are to the given equation that satisfy the given condition. a+b+c= 30, each of a, b, and c is an integer that is at least 4. suppose we have a coin that has 0.7 probability of landing on heads when flipped. we can model the outcome of each flip as a bernoulli random variable y , where y Traffic accidents: Traffic engineers compared rates of traffic accidents at intersections with raised medians with rates at intersections with two-way left-turn lanes. They found that out of 4656 accidents at intersections with raised medians, 2196 were lo rear-end accidents, and out of 4573 accidents at two-way left-turn lanes, 2076 were rear-end accidents. Part: 0/2 Part 1 of 2 (a) Assuming these to be random samples of accidents from the two types of intersection, construct a 99.8% confidence for the difference between the proportions of accidents that are of the rear-end type at the two types of intersection. Use the TI-84 calculator and round the answers to three decimal places. Let p, represent the population for accidents at intersections with raised medians. A 99.8% confidence interval for the difference between the proportions of accidents that are of the rear-end type at the two types of intersection is Part: 1/2 Part 2 of 2 (b) Does the confidence interval contradict the claim that the proportion of rear-end accidents is the same at both types of intersection? Because the confidence interval does not contain 10, it does not contradict the claim that the proportion of rear-end accidents is the same at both types of intersection If u = [ a z -1 3 b], |lu|l = 8, ab = 25 then (a + b) = A 25 B 100 C 75 D 50 5) Suppose that (0.75) = f(0.25) = if the composite trapezoidal rule with n=2 gives the value 4 for f(x) dx and gives the value 3 with n=4 then = A4 B1 C 3 D 2 The minimized version of the logic circuit in the given figure is F O (x'yz')' O (xyz)' O (x'yz)' O (xy'z)' Write a generalize formula for the Personal Holding Company Taxbelow Two brands of water, Natural Water and Mountain Water, are close substitutes. If the price of Mountain Water decreases, the fall in price:a. shifts the demand curve for Natural Water rightwardb. increases the demand for Mountain Waterc. shifts the demand curve for Natural Water leftwardd. increases the price of Natural Water Given the statements Lisa speaks French. p q Lisa has a Math degree. Write a Conjunction of the statements. Lisa SPeaks French and has a math degree. Negate the conjunction, Write a Disjunction of the statements. Negate the disjunction. PART B: Which TWO phrases from the text best support the answers to Part A?A. "In the heated climate of the late 1960s and early 1970s, President Nixonbelieved strongly that a war was being fought between 'us' and 'them."(Paragraph 2)B. "After the arrest of the five burglars at Watergate, people scrambled tocover up White House involvement." (Paragraph 5)C. "When the burglars were tried in January 1973, James McCord admitted in aletter that members of the Nixon Administration ordered the Watergatebreak-in." (Paragraph 7)D. "In a televised speech, Nixon assured the American public 'I am not acrook."" (Paragraph 8)E. "By this time, the House Judiciary Committee had already drawn up Articlesof Impeachment, and Nixon knew he did not have the votes in the Senateto save his Presidency." (Paragraph 11)F. "His successor, Gerald Ford, promptly awarded Nixon a full pardon for anycrimes he may have committed while in office." (Paragraph 12) download the document below and complete the proof of the triangle sum theorem. once completed, save the file for upload at the bottom of this page. 33. The government owns and operates many basic industries. Factories are given quotasthe government has complete control.LaborEntrepreneurCommand economMixed Economy Exploring appropriate and ethical behaviours related to online environments and digital media. Options. Cyber ethics. Cyber security. Cyber safety. Anderson Industries is deciding whether to automate one phase of its production process. The manufacturing equipment has a six-year life and will cost $905,000. Projected net cash inflows are as follows: (Click the icon to view the projected net cash inflows.) (Click the icon to view the present value table.) (Click the icon to view the future value table.) Read the requirements. (Click the icon to view the present value annuity table. (Click the icon to view the future value annuity table.) Begin by computing the project's NPV (net present value). (Round your answer to the nearest whole dollar. Use parentheses or a minus sign for negative net present values.) Net present value Anderson Industries invest in the equipment because its NPV is Requirement 2. Anderson Industries could refurbish the equipment at the end of six years for $102,000. The refurbished equipment could be used one more year, providing $78,000 of net cash inflows in Year 7. In addition, the refurbished equipment would have a $54,000 residual value at the end of Year 7. Should Anderson Industries invest in the equipment and refurbish it after six years? Why or why not? (Hint: In addition to your answer to Requirement 1, discount the additional cash outflow and inflows back to the present value.) nearest whole dollar. Use Calculate the additional NPV provided from the refurbishment. (Round your answer t parentheses or a minus sign for negative net present values.) Additional NPV provided from refurbishment The refurbishment provides a NPV. The refurbishment NPV is to overcome the original NPV of the equipment. Therefore, the refurbishment alter Anderson Industries' original decision regarding the equipment investment. Anderson Industries is deciding whether to automate one phase of its production process. The manufacturing equipment has a six-year life and will cost $905,000. Projected net cash inflows are as follows: (Click the icon to view the projected net cash inflows.) (Click the icon to view the present value table.) (Click the icon to view the future value table.) Read the requirements. (Click the icon to view the present value annuity table.) (Click the icon to view the future value annuity table.) Requirement 1. Compute this project's NPV using Anderson Industries' 16% hurdle rate. Should Anderson Industries invest in the equipment? Why or why not? Begin by computing the project's NPV (net present value). (Round your answer to the nearest whole dollar. Use parentheses or a minus sign for negative net present values.) Net present value Anderson Industries invest in the equipment because its NPV is Requirement 2. Anderson Industries could refurbish the equipment at the end of six years for $102,000. The refurbished equipment could be used one more year, providing $78,000 of net cash inflows in Year 7. In addition, the refurbished equipment would have a $54,000 residual value at the end of Year 7. Should Anderson Industries invest in the equipment and refurbish it after six years? Why or why not? (Hint: In addition to your answer to Requirement 1, discount the additional cash outflow and inflows back to the present value.) Calculate the additional NPV provided from the refurbishment. (Round your answer to the nearest whole dollar. Use parentheses or a minus sign for negative net present values.) Additional NPV provided from refurbishment The refurbishment provides a NPV. The refurbishment NPV is to overcome the original -year life and will cost $905,000. Projected net cash inflows are as follows: to vie - X to vie SE Data table to vie re Year 1 $261,000 Year 2 $255,000 Year 3 $222,000 bul Year 4 $214,000 Year 5 $200,000 I W Year 6 $173,000 tries Print Done 2. Anderso $1 Yea uipment co SWAMILY uipment wo ersc and refurbish it after six years? Why or why not? (Hint: In addition to your answer ents. Compute oment? ing the p minus s he which class of fire extinguisher includes a number in its classification?