For a population with a mean equal to 200 and a standard deviation equal to 25, calculate the standard error of the mean for the following sample sizes. a) 10 b) 40 c) 70 a) The standard error of the mean for a sample size of 10 is Round to two decimal places as needed.) b) The standard error of the mean for a sample size of 40 is (Round to two decimal places as needed.) c The standard error of the mean for a sample size of 70 is (Round to two decimal places as needed.)

To estimate the cost of a new 3000-ft² heat exchange system for a plant retrofit, we can use the price index and the information about the cost of a previous heat exchanger. Given that the price index 7 years ago was 1360 and is now 1478, and assuming a power-sizing exponent of 0.55, rough estimate for the cost of the new heat exchanger system is $77,700.

To estimate the cost, we need to account for the change in the price index over the years. The price index ratio is calculated as (new price index)/(old price index), which in this case is 1478/1360 = 1.085. Since the power-sizing exponent is 0.55, we raise the price index ratio to the power of 0.55, resulting in [tex]1.085^{0.55 {[/tex]≈ 1.036.

Next, we multiply the cost of the previous heat exchanger by this factor to estimate the cost of the new system. The cost of the previous heat exchanger was $75,000, so the rough estimate for the cost of the new heat exchanger system is approximately $75,000 × 1.036 ≈ $77,700.

It's important to note that this estimate is a rough approximation and does not account for other factors such as inflation or changes in technology. It serves as a starting point for estimating the cost of the new heat exchanger system based on the given information and assumptions.

Learn more about estimate here:

https://brainly.com/question/30876115

#SPJ11

The hypothesis and conclusion of each conditional statement are,

Hypothesis statement: Two angles are vertical.

Conclusion statement: The two angles are congruent.

We have to give that,

The statement is,

''If two angles are vertical, then they are congruent.''

Hence, we get;

Hypothesis statement:

Two angles are vertical.

Conclusion statement:

The two angles are congruent.

Therefore, The hypothesis and conclusion of each conditional statement are,

Hypothesis statement: Two angles are vertical.

Conclusion statement: The two angles are congruent.

To learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ4

To find the mean, median, and mode for the given set of values: 0, 3, 3, 7, 7, 8, 21, 22, 25, follow these steps:

1. Mean: The mean is calculated by summing all the values and dividing by the total number of values.

Sum of the values: 0 + 3 + 3 + 7 + 7 + 8 + 21 + 22 + 25 = 96

Total number of values: 9

Mean = Sum of values / Total number of values

Mean = 96 / 9 = 10.67 (rounded to two decimal places)

Therefore, the mean of the given set of values is approximately 10.67.

2. Median: The median is the middle value when the data is arranged in ascending order. If there is an even number of values, the median is the average of the two middle values.

First, let's arrange the values in ascending order:

0, 3, 3, 7, 7, 8, 21, 22, 25

Since there are nine values, the middle value is the fifth value, which is 7.

Therefore, the median of the given set of values is 7.

3. Mode: The mode is the value that appears most frequently in the data set.

In the given set of values: 0, 3, 3, 7, 7, 8, 21, 22, 25, the mode is 3 and 7 because both values appear twice, which is more than any other value in the set.

Therefore, the mode(s) of the given set of values are 3 and 7.

Learn more about Median here:

https://brainly.com/question/300591

#SPJ11

The value of ∠A and ∠B are both approximately 33.7° to the nearest tenth.

We are given that;

∠C is a right angle,

so sin(∠A) = opposite/hypotenuse = a/c and

cos(∠A) = adjacent/hypotenuse = b/c

Now,

We can use the Pythagorean theorem to find the length of the third side of the triangle:

[tex]a² + b² = c²[/tex]

where a is the length of the missing side.

we have b = 29 and c = 35.

So we have:

[tex]a² + 29² = 35²a² + 841 = 1225a² = 384[/tex]

a ≈ 19.6

So the length of the missing side is approximately **19.6** to the nearest tenth.

Now we can use trigonometry to find the angles. We know that sin(θ) = opposite/hypotenuse, cos(θ) = adjacent/hypotenuse, and tan(θ) = opposite/adjacent.

So we have:

sin(∠A) = a/c

sin(∠A) = 19.6/35

sin(∠A) ≈ 0.56

∠A ≈ 33.7°

cos(∠A) = b/c

cos(∠A) = 29/35

cos(∠A) ≈ 0.83

∠B ≈ 33.7°

Therefore, by pythagoras theorem the answer will be 33.7° to the nearest tenth.

Learn more about Pythagoras theorem;

https://brainly.com/question/343682

#SPJ4

To the nearest tenth of a degree, the angle measure for tan⁻¹ √2 is approximately 55.0°.

To find the angle measure to the nearest tenth of a degree for the expression tan⁻¹ √2, we need to evaluate the inverse tangent function for the value of √2. The inverse tangent function, denoted as tan⁻¹ or arctan, gives us the angle whose tangent is equal to the given value.

In this case, we want to find the angle whose tangent is √2. Using a calculator or a math software capable of evaluating trigonometric functions, we can input the value √2 into the inverse tangent function and obtain the result.

tan⁻¹ √2 ≈ 55.0°

Hence, to the nearest tenth of a degree, the angle measure for tan⁻¹ √2 is approximately 55.0°.

This means that there is an angle whose tangent is equal to √2, and that angle measures around 55.0 degrees. It's worth noting that angle measures are typically expressed in decimal degrees to provide more precise values.

The inverse tangent function allows us to work backward from a tangent value to find the corresponding angle. In this case, by taking the inverse tangent of √2, we determine the angle whose tangent is √2, which is approximately 55.0 degrees.

learn more about angle here

https://brainly.com/question/30147425

#SPJ11

A number with a 6 that is 10 times the value of the 6 in 236,789.321 is 236,7893.21.

To find a number with a 6 that is 10 times the value of the 6 in the number 236,789.321, we can follow these steps:

Identify the position of the 6 in the number: 236,789.321.

The 6 is located in the thousands place.

Determine the value of the 6 in that position.

The value of the 6 in the thousands place is 6,000.

Multiply the value of the 6 by 10 to find a number that is 10 times the value.

6,000 x 10 = 60,000.

Therefore, a number with a 6 that is 10 times the value of the 6 in 236,789.321 = 236,789.321 × 10 = 236,7893.21

Hence the required number is 236,7893.21.

Learn more about Place values click;

https://brainly.com/question/27734142

#SPJ4

The simplified expression (3i)² - 3(1 + 5i) simplifies to -12 - 15i.

To simplify the expression (3i)² - 3(1 + 5i), we can start by expanding and simplifying each term:

(3i)² = (3i)(3i) = 9i²

Now, recall that i² is defined as -1, so we can substitute this value:

9i² = 9(-1) = -9

Next, let's simplify the second term:

3(1 + 5i) = 3 + 15i

Now we can combine the simplified terms:

(-9) - 3 - 15i = -12 - 15i

Therefore, the simplified expression is -12 - 15i.

To learn more about expression  Click Here:  brainly.com/question/28172855

#SPJ11

In this simulation, we will represent correct answers as "C" and incorrect answers as "I." The quiz will consist of five true-or-false questions. To find the experimental probability of getting at least three correct answers,

we will repeat the quiz multiple times and keep track of the number of times we obtain three or more correct answers. The experimental probability is then calculated by dividing the number of successful outcomes by the total number of trials.

Running the simulation for a large number of trials, let's say 10,000, we will randomly guess the answers for each question. For each trial, we count the number of correct answers. If the count is three or greater, we consider it a successful outcome.

After running the simulation with 10,000 trials, we record the number of successful outcomes and divide it by the total number of trials. This provides us with the experimental probability of getting at least three correct answers on the quiz when guessing randomly.

By calculating the experimental probability through simulation, we can estimate the likelihood of obtaining three or more correct answers on a five-question true-or-false quiz when guessing randomly.

Learn more about Simulation here:

brainly.com/question/32099547

#SPJ11

The compound inequality that describes the range of the given function is 0 ≤ y ≤ 3. This means that y is greater than or equal to 0 and less than or equal to 3. Option (H) correctly represents the range of the function.

To determine the range of the function, we need to analyze the given options (F), (H), and (I). Let's examine each option in detail.

Option (F) -3: This option represents the range as a single value, -3. However, the given function may have a broader range, so this option is not suitable.

Option (H) 0 ≤ y ≤ 3: This compound inequality represents the range of the function. It states that y is greater than or equal to 0 and less than or equal to 3. This means that all possible values of y for the given function fall within this range.

Option (I) 5 ≤ y ≤ 6: This compound inequality does not accurately describe the range of the function. It suggests that y is greater than or equal to 5 and less than or equal to 6, which may not include all possible values of y for the given function.

Therefore, the correct compound inequality that describes the range of the function is 0 ≤ y ≤ 3. It encompasses all possible values of y that the function can take.

In conclusion, the range of the given function is represented by the compound inequality 0 ≤ y ≤ 3. It states that y is greater than or equal to 0 and less than or equal to 3. Any value of y within this range satisfies the given function.

Learn more about compound inequalities here:

https://brainly.com/question/20296065

#SPJ4

The polynomial function with the given zeros x = 3 + i and x = -1 - √5 is:

f(x) = x⁴ - 4x³ - 6x² - 8x + 40

Here, we have,

To write a polynomial function with the given complex zeros, we need to consider their conjugate pairs.

The given zeros are x = 3 + i and x = -1 - √5.

Since complex zeros occur in conjugate pairs, the conjugates of the given zeros are x = 3 - i and x = -1 + √5, respectively.

To find the polynomial function, we can multiply the factors corresponding to each zero:

(x - (3 + i))(x - (3 - i))(x - (-1 - √5))(x - (-1 + √5))

Expanding and simplifying this expression, we get:

[(x - 3) - i][(x - 3) + i][(x + 1 + √5)][(x + 1 - √5)]

Now, let's multiply the conjugate factors:

[(x - 3)² - i²][(x + 1)² - (√5)²]

Simplifying further:

[(x² - 6x + 9) + 1][(x² + 2x + 1) - 5]

Expanding and combining like terms:

(x² - 6x + 10)(x² + 2x - 4)

Finally, multiplying the binomials:

x⁴ - 4x³ - 6x² - 8x + 40

Therefore, the polynomial function with the given zeros x = 3 + i and x = -1 - √5 is:

f(x) = x⁴ - 4x³ - 6x² - 8x + 40

Know more about Polynomials here:

brainly.com/question/2833285

#SPJ4

Here are the reasons why control of column and detector temperature is more important for nonsuppressed IC than it is for suppressed IC: Overall, the higher sensitivity of the conductivity detector and the lower conductivity of the eluent in nonsuppressed IC make it more important to control column

Nonsuppressed IC uses a conductivity detector, which measures the electrical conductivity of the eluent. The conductivity of the eluent is affected by temperature, so changes in temperature can cause changes in the baseline signal and make it difficult to see the peaks of the analytes. In suppressed IC, a suppressor is used to remove the ions from the eluent before it reaches the detector, so temperature changes have less of an effect on the baseline signal.

Nonsuppressed IC uses dilute eluents, which have lower conductivity than concentrated eluents. This means that the baseline signal is already very low in nonsuppressed IC, so even small changes in temperature can cause significant changes in the baseline signal. In suppressed IC, the eluent is more concentrated, so the baseline signal is higher and less affected by temperature changes.

Nonsuppressed IC uses columns with lower ion-exchange capacity than suppressed IC columns. This means that the analytes have a longer retention time in nonsuppressed IC, which gives them more time to interact with the column and the eluent. This interaction can be affected by temperature, so it is important to keep the temperature constant to ensure reproducible results. In suppressed IC, the analytes have a shorter retention time, so they are less affected by temperature changes.

Overall, the higher sensitivity of the conductivity detector and the lower conductivity of the eluent in nonsuppressed IC make it more important to control column and detector temperature in this method than in suppressed IC.

Learn more about control of column here:

brainly.com/question/4969893

#SPJ11

To find the diameter of a circle given its area, we can use the following formula:

Area = π * (radius)^2

However, since we are given the area of the circle and not the radius, we need to rearrange the formula to solve for the radius first:

radius = √(Area / π)

Substituting the given area of 256 square inches into the formula:

radius = √(256 / π)

Now, to find the diameter, we simply double the radius:

diameter = 2 * radius

Let's calculate it:

radius = √(256 / π) ≈ 9.06 inches (rounded to two decimal places)

diameter = 2 * radius ≈ 2 * 9.06 ≈ 18.12 inches (rounded to two decimal places)

Therefore, the diameter of the circle with an area of 256 square inches is approximately 18.12 inches.

Learn more about diameter here:

brainly.com/question/33294089

#SPJ11

The output of the code is:

f(a) =  4

f(a + h) =  52

difference quotient =  16.0

The difference quotient f(a+h)−f(a)/h, where h≠0.

f(x)=2−5x+3x²

* f(a) is found by substituting a for x in the function f(x).

* f(a + h) is found by substituting a + h for x in the function f(x).

* The difference quotient is found by evaluating f(a + h) - f(a) and dividing by h.

Here is the code to calculate the answers in Python:

```python

def f(x):

 return 2 - 5*x + 3*x**2

def main():

 a = 2

 h = 3

 f_a = f(a)

 f_a_h = f(a + h)

 difference_quotient = (f_a_h - f_a) / h

 print("f(a) = ", f_a)

 print("f(a + h) = ", f_a_h)

 print("difference quotient = ", difference_quotient)

if __name__ == "__main__":

 main()

* f(a) = 2 - 5a + 3a²

* f(a + h) = 2 - 5(a + h) + 3(a + h)²

* f(a + h) - f(a) / h = 16

to learn more about quotient click here:

brainly.com/question/672962

#SPJ11

The IS curve, short for Investment-Saving curve, represents the relationship between aggregate output (Y) and the real interest rate (r) in an economy. It has a negative slope because of the inverse relationship between investment and the real interest rate.

The negative slope of the IS curve can be explained by the interest rate effect on investment and saving decisions. When the real interest rate is high, the cost of borrowing for investment purposes increases, leading to a decrease in investment spending. As a result, the aggregate output decreases. On the other hand, when the real interest rate is low, the cost of borrowing decreases, encouraging investment and increasing aggregate output.

Several factors determine the flatness or steepness of the IS curve. One important factor is the responsiveness of investment and saving to changes in the real interest rate. If investment and saving are highly sensitive to interest rate changes, the IS curve will be steep. This means that small changes in the real interest rate will have a significant impact on aggregate output. Conversely, if investment and saving are relatively unresponsive to interest rate changes, the IS curve will be flatter, indicating that larger changes in the real interest rate are required to affect aggregate output. Other factors that influence the flatness or steepness of the IS curve include the availability of credit, consumer and business confidence, and expectations about future economic conditions. Additionally, fiscal policy measures, such as changes in government spending or taxation, can also affect the slope of the IS curve by influencing aggregate demand and investment decisions.

Learn more about curve here: brainly.com/question/31389331

#SPJ11

In a class of 30 students, if only 1/5 of the students have cell phones and only 1/2 of the students with cell phones can use social media, then the number of students who have cell phones and can use social media can be calculated by multiplying the fractions.

The result is 1/10 of the total number of students, which is equivalent to 3 students.

Given that there are 30 students in the class, 1/5 of them have cell phones. To find the number of students with cell phones, we multiply 30 by 1/5:

30 * 1/5 = 6 students

Now, out of these 6 students with cell phones, only 1/2 of them can use social media. To determine the number of students who meet this criterion, we multiply 6 by 1/2:

6 * 1/2 = 3 students

Therefore, 3 students in the class have both cell phones and the ability to use social media.

Learn more about Fractions here :

brainly.com/question/10708469

#SPJ11

The forecast for year 6 using a 2-year moving average is 3825 miles.

The MAD based on the 2-year moving average cannot be calculated without the actual data for years 5 and 4.

The forecast for year 6 using a weighted 2-year moving average cannot be determined without the specific values for years 5 and 4.

A 2-year moving average involves taking the average of the data for the current year and the previous year to make the forecast for the next year. In this case, the forecast for year 6 is determined by averaging the data for years 5 and 4. The resulting forecast is 3825 miles.

To calculate the Mean Absolute Deviation (MAD), we need three years of matched data. However, the provided information only mentions the forecast for year 6 without mentioning the actual data for years 5 and 4. Therefore, the MAD value cannot be determined without the actual data.

In the case of a weighted 2-year moving average, the weights assigned to the data for the two years determine their relative importance in the forecast. The weight of 0.45 is assigned to the less recent period, and the weight of 0.55 is assigned to the most recent period. However, the specific values for years 5 and 4 are not provided, making it impossible to calculate the forecast for year 6 using the weighted moving average.

Learn more about Mean absolute deviation here:

https://brainly.com/question/32035745

#SPJ11

To rewrite the quadratic function f(x) = x² - x in standard form, we complete the square to obtain f(x) = (x - 1/2)² - 1/4. The vertex is (1/2, -1/4).

To rewrite the quadratic function f(x) = x² - x in standard form, we need to expand and rearrange the terms.

f(x) = x² - x

f(x) = x² - 1x

To complete the square and convert it into standard form, we need to add and subtract the square of half the coefficient of the x-term (which is -1/2) inside the parentheses:

f(x) = (x² - 1x + (-1/2)²) - (-1/2)²

f(x) = (x² - x + 1/4) - 1/4

Now, we can simplify and rewrite the equation in standard form:

f(x) = x² - x + 1/4 - 1/4

f(x) = (x - 1/2)² - 1/4

The quadratic function f(x) = x² - x is now in standard form as f(x) = (x - 1/2)² - 1/4.

The vertex of this quadratic function is represented by the values (x, y). Comparing the equation to the standard form equation y = (x - h)² + k, we can determine that the vertex is located at (h, k).

In this case, the vertex is (1/2, -1/4).

for such more question on quadratic function

https://brainly.com/question/17482667

#SPJ8

The expected times for the 40th, 80th, and 160th units are approximately 0.38 hours, 0.45 hours, and 0.53 hours, respectively.

To determine the expected time for the 40th, 80th, and 160th units, we can use the learning curve formula:

T(n) = T(1) * (n^log(b))

where:

T(n) = expected time for the nth unit

T(1) = time for the first unit

n = cumulative units produced

b = learning curve exponent (0.80 in this case)

Given that the time standard for the 20th unit is 0.20 hour per unit, we can substitute the values into the formula to find the expected times for the 40th, 80th, and 160th units.

For the 40th unit:

T(1) = 0.20 hour

n = 40 units

b = 0.80

T(40) = 0.20 * (40^log(0.80))

T(40) ≈ 0.20 * (40^0.322)

T(40) ≈ 0.20 * 1.89

T(40) ≈ 0.38 hours

For the 80th unit:

T(1) = 0.20 hour

n = 80 units

b = 0.80

T(80) = 0.20 * (80^log(0.80))

T(80) ≈ 0.20 * (80^0.322)

T(80) ≈ 0.20 * 2.24

T(80) ≈ 0.45 hours

For the 160th unit:

T(1) = 0.20 hour

n = 160 units

b = 0.80

T(160) = 0.20 * (160^log(0.80))

T(160) ≈ 0.20 * (160^0.322)

T(160) ≈ 0.20 * 2.67

T(160) ≈ 0.53 hours

Therefore, the expected times for the 40th, 80th, and 160th units are approximately 0.38 hours, 0.45 hours, and 0.53 hours, respectively.

For more such question on units. visit :

https://brainly.com/question/30644235

#SPJ8

Here's the mathematical relationship between the distance, d, in feet between the two cars and the time, t, in seconds: d=2[tex]t^{2}[/tex]+x+50

Let's assume the position of the trailing car at time t=0 is represented by x (in feet). Therefore, the position of the lead car at time t=0 would be x+50 (since it is 50 feet ahead).

Now, let's consider the acceleration of the lead car. We are given that the distance, d, between the two cars at any time after t=0 seconds is 50 more than twice the square of t. This can be expressed as:

d = 2[tex]t^{2}[/tex] + 50

Since the initial position of the trailing car is x and the initial position of the lead car is x+50, we can write the relationship between d and t as:

d = 2[tex]t^{2}[/tex] + x + 50

In this equation, d represents the distance between the two cars in feet, t represents the time in seconds, and x represents the initial position of the trailing car at time t=0.

Please note that this equation assumes constant acceleration of the lead car and neglects other factors such as deceleration, changes in velocity, and external influences.

Learn more about Equation here :

https://brainly.com/question/29657983

#SPJ11

A. If f is a factor of g, and g is a factor of h, then f is a factor of h.

B. In order to understand why the statement is true, let's consider the definitions of factors and divisibility.

If f is a factor of g, it means that g can be divided evenly by f without leaving a remainder.

Similarly, if g is a factor of h, it means that h can be divided evenly by g without leaving a remainder.

Now, if f is a factor of g and g is a factor of h, it implies that g can be divided evenly by f and h can be divided evenly by g.

Combining these two statements, we can conclude that h can also be divided evenly by f. Therefore, f is a factor of h.

This can be understood by considering the transitive property of divisibility. If a number x is divisible by another number y, and y is divisible by z, then x is also divisible by z.

In this case, f is divisible by g, and g is divisible by h, so f must also be divisible by h.

Therefore, the statement "f is a factor of h" must be true in this scenario.

Learn more about positive integers:

brainly.com/question/18380011

#SPJ11

To have $3,793,695.00 in his retirement account when he retires, Derek would need the rate on the account to be approximately 5.89%.

To calculate the required rate on Derek's retirement account, we can use the formula for the future value (FV) of an annuity:

[tex]FV = P * [(1 + r)^n - 1] / r[/tex]

Where:

FV is the desired future value

P is the amount deposited on each birthday

r is the interest rate per period

n is the total number of periods (number of birthdays)

In this case, the desired future value (FV) is $3,793,695.00, the amount deposited on each birthday (P) is $14,455.00, and the total number of periods (n) is the difference between Derek's final and initial birthday, which is 68 - 27 = 41.

We need to solve for the interest rate (r). Rearranging the formula:

[tex]r = [(FV / P) / [(1 + r)^n - 1]][/tex]

Substituting the given values, we have:

[tex]r = [(3,793,695.00 / 14,455.00) / [(1 + r)^{41} - 1]][/tex]

We can use numerical methods or trial and error to find the value of r that satisfies the equation. By using these methods, the approximate value of r is found to be 0.0589 or 5.89%.

Therefore, Derek would need the rate on his retirement account to be approximately 5.89% for him to have $3,793,695.00 in it when he retires.

Learn more about interest rate visit:

brainly.com/question/29294869

#SPJ11

The area of each triangular face is:

Area = (1/2) * 10 ft * 6.9 ft ≈ 34.5 ft^2

To find the lateral roof area of the pentagonal pyramid, we need to calculate the area of each triangular face and then multiply it by the number of faces.

The lateral area of a triangular face can be calculated using the formula:

Area = (1/2) * base * height

In this case, the base of each triangular face is 10 feet (the length of each side of the pentagon) and the height is the slant height of the roof, which is approximately 6.9 feet.

Therefore, the area of each triangular face is:

Area = (1/2) * 10 ft * 6.9 ft ≈ 34.5 ft^2

Since there are 5 triangular faces on the pentagonal pyramid, the total lateral roof area is:

Total Area = 5 * 34.5 ft^2 = 172.5 ft^2

So, the correct answer is C. 172.5 ft^2.

Learn more about area  from

https://brainly.com/question/25292087

#SPJ11

Answer:

[tex] - \frac{1}{3} \geqslant - \frac{2}{5} y[/tex]

[tex] \frac{5}{3} \leqslant 2y[/tex]

[tex]y \geqslant \frac{5}{6} [/tex]

The function y = (9/4)x² + 3x - 1 can be written in vertex form as y = (9/4)(x + 2/3)² - 2.

To write the function y = (9/4)x² + 3x - 1 in vertex form, we can complete the square. The vertex form of a quadratic function is given by y = a(x - h)² + k, where (h, k) represents the coordinates of the vertex.

Let's complete the square:

y = (9/4)x² + 3x - 1

y = (9/4)(x² + (4/3)x) - 1

To complete the square, we take half of the coefficient of x, square it, and add it inside the parentheses. However, since we multiplied the entire expression by (9/4), we need to multiply the added term by (9/4) as well.

y = (9/4)(x² + (4/3)x + (2/3)² - (2/3)²) - 1

y = (9/4)(x² + (4/3)x + (2/3)² - 4/9) - 1

y = (9/4)(x + 2/3)² - (9/4)(4/9) - 1

y = (9/4)(x + 2/3)² - 1 - 1

y = (9/4)(x + 2/3)² - 2

Therefore, the function y = (9/4)x² + 3x - 1 can be written in vertex form as y = (9/4)(x + 2/3)² - 2.

Learn more about  function from

https://brainly.com/question/11624077

#SPJ11

Answer:

x² + y² = 10

Step-by-step explanation:

the equation of a circle in standard form is

(x - h)² + (y - k)² = r²

where (h, k) are the coordinates of the centre and r is the radius

here (h, k ) = (0, 0 ) and r = [tex]\sqrt{10}[/tex] , then

(x - 0)² + (y - 0)² = ([tex]\sqrt{10}[/tex] )² , that is

x² + y² = 10

Answer:

4

Step-by-step explanation:

1/4 + 1/4 + 1/4 + 1/4 = 4/4 = 1

Helping in the name of Jesus.

The measure of the angle GEH in a rectangle EFGH, with vertices marked in order, is 33°.

By applying the basic properties of rectangles, we can easily figure out the solution to this problem.

Firstly, whenever a rectangle is mentioned in a question with its vertices, it should always be used in the order given. So, the rectangle EFGH means, the vertices go in the same order, in a clockwise direction. A random order of vertices would affect all measurements which are given or are to be taken later.

So, in the given rectangle, we see that EG AND FH are the diagonals, which can also be marked for the convenience of marking angles.

(The diagram has been given below for reference)

Since we have m∠FEG = 57° (read as 'the measure of angle FEG is 57 degrees'), we need to find the other angle associated with the same diagonal EG and vertex E.

We know that the angle at any vertex of a rectangle with its sides is a right angle, which is part of its basic property.

So, m∠FEH = 90°

But since ∠GEH and ∠GEF are co-joint,

m∠GEH + m∠GEF = m∠FEH

m∠GEH + 57° = 90°

m∠GEH = 90 - 57

m∠GEH = 33°

Thus, the measure of the angle ∠GEH is 33° in the rectangle.

For more on Quadrilaterals and Angle-Properties,

brainly.com/question/19507546

#SPJ4

To identify the coldest city in the United States, three different ways of selecting the coldest city could include looking at average annual temperature, average winter temperature, and record low temperatures.

When determining the coldest city based on average annual temperature, the city with the lowest average temperature throughout the year would be considered the coldest. This approach takes into account the overall temperature patterns and variations experienced by a city across all seasons.

Another method is to analyze the average winter temperature of different cities. Since winter is typically the coldest season, comparing the average temperatures during this time can help identify the coldest city. Cities with consistently low winter temperatures are more likely to be considered the coldest.

Lastly, examining the record low temperatures recorded in various cities can also provide insights into the coldest city. By considering the lowest temperatures ever recorded, we can identify the city that has experienced the most extreme cold conditions.

It's important to note that the coldest city in the United States may vary depending on the specific statistical measure used. While some cities may have the lowest average annual temperature, others might experience colder winters or have more extreme record low temperatures. Therefore, it's necessary to consider multiple factors and statistical measures when determining the coldest city.

Learn more about average here: brainly.com/question/31087305

#SPJ11

Alejandro's current age is 17 years old.

Let's assume that Wilfredo's current age is 42 years. According to the given information, Wilfredo is 8 years older than twice Alejandro's age.

Let's represent Alejandro's age as 'x'. Therefore, twice Alejandro's age would be 2x. According to the information, Wilfredo is 8 years older than twice Alejandro's age, so we can form the equation:

42 = 2x + 8

To find the value of 'x', we can subtract 8 from both sides of the equation:

42 - 8 = 2x

34 = 2x

Next, we can divide both sides of the equation by 2 to solve for 'x':

34/2 = 2x/2

17 = x

Therefore, Alejandro's current age is 17 years old.

​for such more question on current age

https://brainly.com/question/25863198

#SPJ8

The following statement is true: strong winds occur where isobars are closely spaced.

Isobars are lines on a weather map that connect points of equal atmospheric pressure. The spacing between isobars provides information about the pressure gradient, which is the change in pressure over a given distance. When isobars are closely spaced, it indicates a steep pressure gradient, which in turn leads to strong winds.

This is because air moves from areas of high pressure to areas of low pressure, and the greater the pressure difference, the faster the air will flow. Therefore, when isobars are closely spaced, it suggests a rapid change in pressure over a short distance, creating strong winds.

Regarding the other options:

- Isobars on a surface map are not necessarily drawn at 8mb intervals. The spacing between isobars can vary depending on the map and the purpose for which it is created.

- Atmospheric pressure increases towards the center of a high-pressure system, not a low-pressure system. In a high-pressure system, air descends and compresses near the surface, leading to higher pressure at the center.

- Atmospheric pressure decreases towards the center of a low-pressure system. In a low-pressure system, air rises and expands, causing lower pressure at the center.

Therefore, the true statement is that strong winds occur where isobars are closely spaced.

Learn more about distance here:

brainly.com/question/13034462

#SPJ11