For a reversible reaction, the Keq (equilibrium constant) is equal to the ratio of the concentrations of the products to the concentrations of the reactants, each raised to their respective stoichiometric coefficients.
What is Equilibrium Constant?For a reversible reaction, the Keq, also known as the equilibrium constant, is equal to the ratio of the concentrations of products to reactants, each raised to the power of their respective stoichiometric coefficients. In other words, if the reaction is:
aA + bB ⇌ cC + dD,
then the Keq expression is:
Keq = ([C]^c * [D]^d) / ([A]^a * [B]^b)
where [A], [B], [C], and [D] represent the equilibrium concentrations of the respective species, and a, b, c, and d are their stoichiometric coefficients in the balanced chemical equation.
To know more about equilibrium:
https://brainly.com/question/15118952
#SPJ11
What is the solubility of KClO3 at 40°C? Please help I am so confused how to attempt to solve this problem
Answer:
1.1428
Explanation:
Solubility=1000xmass of Solute/Volumexmolar mass
Mass=14g
Molar mass of KCI03=122.5
Volume of the Solution=100cm3
Solubility=1000×14/100×122.5
Solubility=1.1428
define configurational isomers and name the 2 categories. These 2 categories can also be considered ___________.
Configurational isomers are a type of stereoisomers that have the same molecular formula and sequence of bonded atoms, but differ in the spatial arrangement of those atoms. The two categories of configurational isomers are enantiomers and diastereomers.
What are Configurational Isomers?
Configurational isomers are a type of stereoisomers that differ in the arrangement of atoms in space without the breaking of covalent bonds. The two categories of configurational isomers are geometric isomers (also known as cis-trans isomers) and optical isomers (also known as enantiomers). Enantiomers are mirror images of each other and cannot be superimposed on each other. Diastereomers, on the other hand, are stereoisomers that are not mirror images of each other and can be distinguished by their physical and chemical properties. These two categories can also be considered optical isomers because enantiomers rotate plane-polarized light in opposite directions.
To know more about Isomers:
https://brainly.com/question/17624674
#SPJ11
what chemical will be used to make the bacterial cells competent?
To make bacterial cells competent, a common chemical used is calcium chloride (CaCl2).
This chemical can help to neutralize the negative charges on the bacterial cell membrane, allowing DNA to more easily enter the cell. Other chemicals that can be used include rubidium chloride (RbCl) and strontium chloride (SrCl2).
To know more about bacterial cells competent click this link-
brainly.com/question/3162743
#SPJ11
In a hemiacetal, the carbon is bonded to what 4 groups? How about for an acetal?
In an acetal, the carbon is bonded to two alkyl groups (-R) and two oxygen atoms (-O-) from two alcohol molecules.
In a hemiacetal, the carbon is bonded to an alcohol group (-OH), an alkyl group (-R), a hydrogen atom (-H), and an oxygen atom (-O-) from another alcohol molecule.
R1
|
R2 - C - OH
|
OR3
The bonding in an acetal group is shown below.
R1
|
R2 - C - OR4
|
OR3
To know more about acetal, click below.
https://brainly.com/question/31674429
#SPJ11
Convert 0.250 grams of water into the corresponding number of moles
Answer:
If 1 mole of water = 18 g
× =0.250g
Hence cross Multiply to get.
0.250×1/18=0.01389 moles
relationship between the air's capacity to hold water vapor and air temprature
Explanation:
Hot air expands, and rises; cooled air contracts – gets denser – and sinks; and the ability of the air to hold water depends on its temperature. A given volume of air at 20°C (68°F) can hold twice the amount of water vapor than at 10°C (50°F).
Why do you think there are fluctuations occurring over a steady incline?
The electrical potential created by ONE ion can be calculated by using what equation?
The electrical potential created by one ion can be calculated by using the equation:
Electrical potential (V) = k × q / r
"Electrical potential" (V) refers to the electric potential energy per unit charge at a particular point, "k" is the electrostatic constant (8.99 × 10^9 N m^2 C^-2), "q" represents the charge of one ion, and "r" is the distance from the ion to the point where you want to calculate the electrical potential.
1. Identify the charge of the ion (q) and the distance from the ion to the point of interest (r).
2. Multiply the electrostatic constant (k) by the charge (q).
3. Divide the result by the distance (r).
4. The result is the electrical potential (V) created by one ion at the specified point.
To learn more about electric potential visit: https://brainly.com/question/12990974
#SPJ11
what is the density in g/l of co at 1140 torr and 75.0 °c?
The density of CO gas at 1140 torr and 75.0 °C is 1.53 g/L.
How to calculate the density of CO gas at 1140 torr and 75.0 °C?To calculate the density of CO gas at 1140 torr and 75.0 °C, we can use the ideal gas law:
PV = nRT
where P is the pressure in atmospheres (atm), V is the volume in liters (L), n is the number of moles of gas, R is the ideal gas constant (0.08206 L·atm/mol·K), and T is the temperature in Kelvin (K).
First, we need to convert the given pressure of 1140 torr to atmospheres:
1 atm = 760 torr
1140 torr ÷ 760 torr/atm = 1.50 atm
Next, we need to convert the given temperature of 75.0 °C to Kelvin:
T (K) = T (°C) + 273.15
T (K) = 75.0 °C + 273.15 = 348.15 K
Now we can rearrange the ideal gas law to solve for the density of CO:
n/V = P/RT
To find the density, we need to solve for n/V, which is the number of moles of CO per liter of gas:
n/V = P/RT = (1.50 atm) / (0.08206 L·atm/mol·K x 348.15 K) = 0.0544 mol/L
Finally, we can calculate the density of CO in g/L using its molar mass:
Molar mass of CO = 12.01 g/mol + 15.99 g/mol = 28.00 g/mol
Density of CO = (0.0544 mol/L) x (28.00 g/mol) = 1.53 g/L
Therefore, the density of CO gas at 1140 torr and 75.0 °C is 1.53 g/L.
Learn more about density
brainly.com/question/29775886
#SPJ11
Determine the pOH of a 0.227 M C5H5N solution at 25°C. The Kb of C5H5N is 1.7 × 10^-9.
A) 4.59
B) 9.41
C) 4.71
D) 10.14
E) 9.29
The pOH of a 0.227 M C5H5N solution at 25°C. is E) 9.29 (rounded to two decimal places).
How to find the pOH of a solution?First, we need to find the pH of the solution using the Kb value and the concentration of C5H5N:
Kb = [OH-][C5H5N]/[C5H5NH+]
Let x be the concentration of OH-. Since C5H5N is a weak base, we can assume that x is much smaller than 0.227 M, so we can neglect it in the denominator.
Kb = x^2/0.227
x = sqrt(Kb*0.227) = 2.44 x 10^-5 M
Now we can find the pOH:
pOH = -log[OH-] = -log(2.44 x 10^-5) = 4.61
Finally, we can use the fact that pH + pOH = 14 to find the pH:
pH = 14 - pOH = 14 - 4.61 = 9.39
To know more about pOH:
https://brainly.com/question/13423425
#SPJ11
a solution is prepared by dissolving 15.0 g of nh3 in 250.0 g of water. the density of the resulting solution is 0.974 g/ml. what is the mole fraction of nh3 in the solution?
The mole fraction of NH₃ in the solution is 0.076. The mole fraction is a way of expressing the concentration of a component in a solution. It is defined as the number of moles of a particular component divided by the total number of moles in the solution.
To determine the mole fraction of NH₃ in the solution, we need to first calculate the total mass of the solution.
Total mass of solution = mass of NH₃ + mass of water
Total mass of solution = 15.0g + 250g
Total mass of solution = 265.0g
Next, we can use the density of the solution to calculate its volume:
Density = mass/volume
0.974 g/ml = 265.0g/volume
Volume = 272.11 ml
Now we can use the mass of NH₃ and the total volume of the solution to calculate the mole fraction of NH₃:
Mole fraction of NH₃= moles of NH₃/total moles in solution
To find the moles of NH₃, we need to first convert the mass of NH₃ to moles using its molar mass:
Molar mass of NH₃ = 14.01 g/mol
Moles of NH₃= 15.0g / 14.01 g/mol
Moles of NH₃= 1.07 mol
To find the total moles in the solution, we need to use the density and the molar volume of water (which is 18.02 mL/mol at room temperature and pressure):
Volume of water = total volume - volume of NH₃
Volume of water = 272.11 ml - (15.0g / 1.00 g/ml)
Volume of water = 257.11 ml
Total moles in solution = (257.11 ml / 1000 ml/L) * (1 L/1000 ml) * (1 mol/18.02 L)
Total moles in solution = 0.014 mol
Now we can calculate the mole fraction of NH₃:
Mole fraction of NH₃= 1.07 mol / 0.014 mol
Mole fraction of NH₃= 0.076
Therefore, the mole fraction of NH₃ in the solution is 0.076.
Learn more about mole fraction here:
brainly.com/question/29905133
#SPJ1
calculate the pH and pOH when [H+] = .025 M
The pH of a solution is a measure of the activity of hydrogen ions (H+) in the solution. pOH is a measure of the activity of hydroxide ions (OH-) in a solution.
To calculate pH and pOH, when [H+] = 0.025 M, we can use the equation pH + pOH = 14. First, we calculate pH. Since [H+] is given, we can calculate pH directly from [H+] using the equation pH = -log[H+]. Plugging in [H+] = 0.025 M gives pH = -log(.025) = 2.6.
Next, we can calculate the pOH. Since pH + pOH = 14, we can calculate pOH by subtracting pH from 14. Plugging in pH = 2.6 gives pOH = 14 - 2.6 = 11.4. Therefore, the pH and pOH of a solution with [H+] = 0.025 M are 2.6 and 11.4, respectively.
Learn more about pH at :
https://brainly.com/question/15289741
#SPJ1
when deionized water was added to the blue solution, the equilibrium shifted, as evidenced by the color change. how did this stress change the value of the equilibrium constant, k? justify your answer.
When deionized water was added to the blue solution, the equilibrium shifted, as evidenced by the color change. The value of the equilibrium constant, k was changed by the addition of more reactants.
When a strong acid is added to a prepared buffer solution, the pH change is minimal due to the presence of a weak acid and its conjugate base in the buffer. These components work together to neutralize the added acid, maintaining the pH within a certain range. In contrast, when the strong acid is mixed with deionized water, the pH change is more significant because there are no buffering agents to neutralize the acid.
Based on the results obtained, the prepared buffer solution effectively resisted pH changes when minimal amounts of acid or base were mixed into the solution. A buffer solution is a solution that is capable of resisting changes in pH when small amounts of acid or base are added to it. A buffer solution typically consists of a weak acid and its conjugate base or a weak base and its conjugate acid.
To know more about equilibrium constant here
https://brainly.com/question/29765337
#SPJ4
Explain briefly how soil helps to sustain life on Earth
Soil is a crucial component of the Earth's ecosystem and plays a vital role in sustaining life by nutrient cycling, water storage and filtration, plant growth and carbon storage.
Importance of soil on life on earthNutrient Cycling: Soil provides a habitat for a vast array of organisms such as bacteria, fungi, and earthworms that help to break down organic matter into nutrients such as nitrogen, phosphorus, and potassium.
Plant Growth: Soil provides a stable base for plants to grow in, and its physical properties, such as texture and structure, influence the water and nutrient holding capacity of the soil. Plants absorb water and nutrients through their roots from the soil, which allows them to grow and produce oxygen for other organisms.
Water Storage: Soil acts as a reservoir for water, holding it for plant use and slowly releasing it to streams and rivers, which is essential for maintaining healthy aquatic ecosystems. Additionally, soil filtration helps to purify the water that enters groundwater aquifers, which is a critical source of drinking water for people.
Carbon Storage: Soil is an essential carbon sink, storing more carbon than the atmosphere and all vegetation combined. Soil helps to reduce the amount of carbon dioxide in the atmosphere, which is a greenhouse gas that contributes to climate change.
learn more on the ecosystem here https://brainly.com/question/842527
#SPJ1
16 g of copper was heated from 20°C to 85°C. How much energy was used to heat Cu? (Specific heat capacity of Cu is 0. 385 J/g °C)
The amount of energy used to heat 16 g of copper from 20°C to 85°C is 404.8 J.
The quantity of energy that is moved from one object or system to another as a result of a temperature differential is referred to as the amount of heat transferred. It can have the following formula:
Q = m x c x ΔT
where:
Q = amount of heat energy transferred,
m = mass of the substance,
c = specific heat capacity of the substance, and
ΔT = change in temperature.
Firstly, we would determine the change in temperature:
ΔT = T₂ - T₁
= 85°C - 20°C
= 65°C
Next, we can calculate the amount of heat transferred using the above values:
Q = m x c x ΔT
Q = 16 g x 0.385 J/g °C x 65°C
Q = 404.8 J
To know more about heat transfer, refer:
https://brainly.com/question/25898569
#SPJ4
Mos are filled in order of their energy with paired electrons having opposite spins.a. Trueb. False
The statement "MOs (Molecular Orbitals) are filled in order of their energy with paired electrons having opposite spins" is: a. True
The locations of a molecule where an electron occupying that orbital is most likely to be located can be represented by a molecular orbital (MO). The electrons in the electric field of a molecule's atomic nuclei are approximate solutions to the Schrödinger equation, and these solutions are known as molecular orbitals. However, it is an incredibly difficult challenge to directly calculate the orbitals from this equation. Instead, they are discovered by combining atomic orbitals, which foretell where an electron will be found in an atom.
Hence, The statement "MOs (Molecular Orbitals) are filled in order of their energy with paired electrons having opposite spins" is True.
To know more about Molecular Orbitals click here:
https://brainly.com/question/29748921
#SPJ11
Please help and explain well, its due..thank you!
If sulfur dioxide concentrations emitted from a volcano increase from less than one part per million (ppm) to 4ppm, is the volcano more or less likely to occur?
Answer:
Please help me too by marking me the brainliest.
Explanation:
The concentration of sulfur dioxide emitted from a volcano does not indicate whether the volcano is more or less likely to occur. Sulfur dioxide is a gas that is often released from volcanoes, and its concentration in the atmosphere can be used to monitor volcanic activity. However, the concentration of sulfur dioxide alone cannot determine whether a volcano is more or less likely to occur.
Volcanic activity is influenced by a complex set of factors, including the type of volcano, the magma composition, the pressure within the volcano, and other geological factors. Changes in the concentration of sulfur dioxide may indicate changes in the activity level of a volcano, but they are not a direct measure of the likelihood of an eruption.
Therefore, we cannot determine whether the volcano is more or less likely to occur based solely on an increase in sulfur dioxide concentrations from less than one part per million to 4ppm.
MY OPINION
if the sulfur concentration from the volcano increased this much supposing it happened in a single day, then it is more likely to occur.
P.S
I am very sorry if i could not be of help to you.
Determine the [OH⁻] concentration in a 0.235 M LiOH solution.
A) 4.25 × 10^-14 M
B) 0.470 M
C) 2.13 × 10^-14 M
D) 0.118 M
E) 0.235 M
The [OH⁻] concentration in a 0.235 M LiOH solution will be 0.235 M.
Option (E) is correct answer
LiOH is a strong base, which means that it dissociates completely in water to form Li⁺ and OH⁻ ions.
A balanced chemical equation is a representation of a chemical reaction with an equal number of atoms of each element on both the reactant and product sides of the equation.
The balanced equation for the dissociation of LiOH in water is:
LiOH → [tex]Li^+[/tex]+ [tex]OH^-[/tex]
Therefore, the [OH⁻] concentration in a 0.235 M LiOH solution is equal to the initial concentration of LiOH, which is 0.235 M.
So the correct answer is E) 0.235 M.
To know more about concentration
https://brainly.com/question/10725862
#SPJ1
Liquids that dissolve in each other in any proportion resulting in a homogeneous solution.a. Trueb. False
True, Liquids that dissolve in each other in any proportion resulting in a homogeneous solution are called miscible liquids.
The statement "Liquids that dissolve in each other in any proportion resulting in a homogeneous solution" .Examples include ethanol and water, which can dissolve in each other in any proportion, resulting in a homogeneous solution.
These types of liquids are known as miscible liquids, as they can mix together in any ratio to form a homogeneous solution without any separation of the components.
Learn more about miscible liquids
brainly.com/question/30530422
#SPJ11
Through the tubuloglomerular feedback mechanism, how would an increase in filtrate NaCl concentration affect afferent arteriole diameter?
Through the tubuloglomerular feedback mechanism, an increase in filtrate NaCl concentration would lead to a decrease in the afferent arteriole diameter.
Here's a step-by-step explanation:
1. An increase in filtrate NaCl concentration indicates a high filtration rate or low reabsorption rate.
2. High NaCl concentration in the filtrate reaches the macula densa cells, which are part of the tubuloglomerular feedback system located in the distal tubule.
3. Macula densa cells detect the high NaCl concentration and release chemical signals (such as adenosine) in response.
4. These chemical signals cause the smooth muscle cells in the afferent arteriole to constrict, leading to a decrease in the afferent arteriole diameter.
5. The decreased diameter of the afferent arteriole reduces blood flow into the glomerulus, thereby lowering the glomerular filtration rate (GFR) and allowing more time for NaCl reabsorption in the nephron.
In summary, the tubuloglomerular feedback mechanism helps maintain a constant GFR by detecting changes in filtrate NaCl concentration and adjusting the afferent arteriole diameter accordingly.
Learn more about NaCl here
https://brainly.com/question/1550455
#SPJ11
How is the concentration of dye monitored during the reaction in this experiment? Select one: Measuring volume of gas produced O UV-Vis absorption O Redox Acid-base titration
The concentration of dye is monitored during the reaction in this experiment using UV-Vis absorption. This method involves measuring the amount of light absorbed by the dye at a specific wavelength.
As the reaction progresses, the concentration of the dye changes, which affects the amount of light absorbed. By measuring the absorbance at regular intervals, the concentration of the dye can be monitored throughout the reaction. It should be noted that this method provides a long answer as it requires a more detailed explanation of the UV-Vis absorption technique.
So, the concentration of dye is monitored using UV-Vis absorption. This method involves passing light through the sample and measuring the absorbance of specific wavelengths. The absorbance is directly related to the concentration of the dye, allowing for effective monitoring during the reaction.
To know more about UV-Vis absorption, refer
https://brainly.com/question/31321905
#SPJ11
A 8.0 × 10^-3 M aqueous solution of at 25.0°C has a pH of
A) 12.20
B) 1.80
C) 1.6 × 10^-2
D) 6.3 × 10^-13
E) 11.90
To determine the pH of an [tex]8.0 * 10^{-3}[/tex] M aqueous solution at 25.0°C, we'll use the formula [tex]pH = -log10[H+],[/tex] where [H+] is the concentration of hydrogen ions in the solution.
1. Given the concentration of H+ ions, [H+] = [tex]8.0 * 10^{-3}[/tex] M.
2. Use the formula [tex]pH = -log10[H+].[/tex]
3. Calculate the pH:[tex]pH = -log10(8.0 * 10^{-3} ).[/tex]
4. Find the pH: pH ≈ 2.10.
None of the given options match the calculated pH value of 2.10. However, if we consider possible rounding, option B) 1.80 would be the closest to our calculated pH value.
To know more about concentration of H+ ions :
https://brainly.com/question/12371372
#SPJ11
which parameter is kept constant in a coffee-cup calorimeter?
A. temperature B. volume C. pressure D. kinetic energy
Answer:pressure
Explanation:
In a coffee-cup calorimeter, the parameter that is kept constant is volume. Thus, the correct answer is B. A coffee-cup calorimeter is an insulated container used to measure heat transfer during chemical reactions or physical processes.
The container is usually filled with a liquid, typically water, which acts as a heat reservoir. When a reaction or process occurs within the calorimeter, the heat generated or absorbed by the system is transferred to the surrounding water. Since the coffee-cup calorimeter is well insulated, the volume of the liquid remains constant throughout the experiment. The temperature, pressure, and kinetic energy may change during the reaction or process, but these changes are measured and used to determine the heat transfer.
Learn more about coffee-cup calorimeter here:
https://brainly.com/question/30582802
#SPJ1
The magnetic force of a material comes from the spinning of what atomic particle?
A. Nucleus
B. Neutron
C. Electron
D. Photon
The magnetic force of a material comes from the spinning of electron atomic particle. Hence, the correct answer is option C.
The force exerted by a magnetic field on a moving charged particle, such as an electron or a proton is called magnetic force and is perpendicular to both the direction of the magnetic field and the direction of the particle's motion.
Strength and direction of the magnetic force depends on the velocity and charge of the particle and also the strength and direction of the magnetic field.
Electrons spinning around the nucleus create magnetic fields, and their orientation determines the overall magnetic force of the material.
To know more about magnetic force, refer
https://brainly.com/question/14411049
#SPJ11
Question 5 of 10
Which of the following reactions is balanced?
OA. CaCl₂ + 2H₂CO3 → CaCO3 + HCI
B. 2CaCl2 + H₂CO3 → CaCO3 + HCI
C. CaCl2 + H₂CO3 → 2CaCO3 + HCI
O D. CaCl₂ + H₂CO3 → CaCO3 + 2HCI
Answer:
D.
Explanation:
I balanced each out and D is the one balanced
Use the periodic table to determine the electron configuration for Si and Y in noble-gas notation
The electron configuration of Si and Y are as follows;
Si = [Ne] 3s² 3p²
Y = [Kr] 4d¹5s²
What is electron configuration?Electron configuration of an element describes how electrons are distributed in its atomic orbitals.
Electron configurations of atoms follow a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.
For example, the electron configuration of sodium is 1s²2s²2p⁶3s¹.
The electron configuration of the following elements are given above.
Learn more about electron configuration at: https://brainly.com/question/29757010
#SPJ1
Calculate the gram formula mass (molar mass) for ammonium sulfide (NH4)2S
Select one:
a. 47.08 grams
b. 68.16 grams
c. 2.06 x 10^22 grams
d. 1.13 x 10^-22 grams
The gram formula mass is b. 68.16 grams
To calculate the gram formula mass (molar mass) for ammonium sulfide (NH4)2S, we need to find the total mass of one mole of the compound.
First, we find the molar mass of each element in the compound:
- Nitrogen (N) has a molar mass of 14.01 g/mol
- Hydrogen (H) has a molar mass of 1.01 g/mol
- Sulfur (S) has a molar mass of 32.07 g/mol
Next, we multiply the molar mass of each element by the number of atoms of that element in the formula and add them together:
(2 x molar mass of NH4) + molar mass of S
= (2 x (14.01 + 4 x 1.01)) + 32.07
= 68.16 g/mol
For more information on gram formula mass refer https://brainly.com/question/21334167
#SPJ11
Intense heat and pressure change igneous and sedimentary rock into?
Intense heat and pressure can change igneous and sedimentary rock into metamorphic rock. Metamorphic rock is formed when pre-existing rocks, either igneous or sedimentary, are subjected to extreme heat and pressure, causing physical and chemical changes in the rock's minerals and texture.
The process of metamorphism occurs deep beneath the Earth's surface, where temperatures and pressures are high enough to alter the minerals and texture of pre-existing rocks. Heat and pressure cause the minerals in the rock to recrystallize, meaning they form new crystals that are more tightly packed together. This process can also cause new minerals to form from existing minerals, which can change the rock's color, texture, and other properties.
Learn more about sedimentary and metamorphic rocks here.
https://brainly.com/question/410815
#SPJ1
How does the standard entropy of a substance depend on its molecular complexity?
The standard entropy of a substance generally increases with its molecular complexity. This is because as the number of atoms and bonds in a molecule increases, there are more ways for the molecule to vibrate and rotate, which results in a greater number of possible states or arrangements for the molecule.
These additional states contribute to a higher entropy value, indicating that the substance is more disordered and has a greater degree of randomness. However, there are exceptions to this trend, as certain molecular structures may restrict the number of possible states and limit entropy despite having a high degree of complexity.
The standard entropy of a substance depends on its molecular complexity because more complex molecules have a greater number of possible arrangements and motions, leading to higher entropy. In general, as molecular complexity increases, the standard entropy of a substance also increases. This is due to the increased number of vibrational, rotational, and translational degrees of freedom in complex molecules, which result in more microstates and thus higher entropy.
To know more about entropy, refer
https://brainly.com/question/419265
#SPJ11
How do you know how many steroisomers (either enantiomers or diasteromets) are possible?
The number of stereoisomers (either enantiomers or diastereomers) that are possible for a molecule depends on the number of stereocenters in the molecule.
How can you calculate the number of stereoisomers of a substance?Enantiomers are molecules that are mirror images but they are not superimposable. They are diastereomers if they are not superimposable and are not mirror images.
X = 2ⁿ, where n is the number of stereogenic atoms in the molecule, is the formula for determining the maximum number of stereoisomers. For instance if a molecule has 2 stereocenters, from X = 2ⁿ four stereoisomers must be present. If similarly a molecule has 3 stereocenters, using the same formula a maximum of eight stereoisomers must be possible.
The formula X = 2ⁿ consistently delivers the maximum number of stereoisomers, but it fails to produce the true number in circumstances with large symmetry.
Learn more about Enantiomers here:
https://brainly.com/question/30401546
#SPJ1