For each of the following species: C2+ & O2- Write the molecular orbital energy diagram and fill in the electrons Hint: in each case, the number of valence electrons in the species is determined first; this is followed by the valence molecular orbital diagram for each species. Find the bond order and state whether the species is stable or unstable Hint: Bond order = (# of bonding e- - # of antibonding e-) ¸ 2 Determine if the species is diamagnetic or paramagnetic Hint: indicate the number of unpaired electrons

The 0.1 M `BaCl_(2)` solution will have the lowest freezing point, followed by the 0.1 M NaCl and then glucose solutions will have the highest freezing points.

The magnitude of the freezing point is directly proportional to the concentration of solute particles present in a solution. Consequently, the solution with the highest concentration of solute particles will have the greatest depression in its freezing point, and the solution with the lowest concentration of solute particles will have the least depression in its freezing point.

Based on this information, we can determine the relative freezing points of the solutions given as follows:

(i) 0.1 M NaCl solution: The concentration of solute particles in this solution is moderate, so the depression in the freezing point of the solvent (water) will also be moderate.

(ii) 0.1 M glucose solution: The concentration of solute particles in this solution is also moderate, so the depression in the freezing point of the solvent (water) will also be moderate.

(iii) 0.1 M `BaCl_(2)` solution: The concentration of solute particles in this solution is relatively high, so the depression in the freezing point of the solvent (water) will be relatively large.

Therefore, the 0.1 M `BaCl_(2)` solution will have the lowest freezing point, followed by the 0.1 M NaCl and glucose solutions, which will have similar freezing points.

learn more about freezing points: https://brainly.com/question/24314907

#SPJ1

The average speeds v and molecular diameters d of five ideal gases are given below. the number of molecules per unit volume is the same for all of them. the collision rate the greatest for d) v = vo and d = 2do.

The ideal gas equation is given as :

P V = n R T

the collision is directly proportional to the molecular diameter and is inversely proportional to the velocity. the collision frequency depends on the temperature and concentration. the rate of collision is given as :

mean free path :

λ = (Rt )/ √2πd²Na P)

average velocity :

v = √8kT/ πm

v = λ / t

1/t = v /λ = (√8kT/ πm) /  (Rt )/ √2πd²Na P)

thus, the rate of collision depends on the temperature , pressure size ans mass of molecule.

The question is incomplete, the complete question is :

The average speeds v and molecular diameters d of five ideal gases are given below. The number of molecules per unit volume is the same for all of them. For which is the collision rate the

greatest?

A. v = v0 and d = d0

B. v = 2v0 and d = d0/2

C. v = 3v0 and d = d0

D. v = v0 and d = 2d0

E. v = 4v0 and d = d0/2

To learn more about ideal gas here

https://brainly.com/question/13559460

#SPJ4

Explanation:

The chemical formula for the amino acid glycine is;

[tex] \bold{HOOC—CH_2—NH_2} [/tex]

[tex]\bold{ ^ - OOC—CH_2—{NH_3}^{+}}[/tex]

[tex]\bold{ ^ - OOC—CH_2—{NH_3}^{+}}[/tex]

[tex] ^-OOC—CH_2—{NH_3}^{+} + {OH}^{-} \: \rightarrow ^ - OOC—CH_2—{NH_2} \: + H_2O \\[/tex]

Entropy changes are most likely to be favorable during a plant's growth from a seed.

To learn more about Entropy refer to:

https://brainly.com/question/419265

#SPJ4

The amount of energy that the body will create during the process of metabolism can be roughly estimated using a bomb calorimeter. the heat energy that is emitted as food burns.

A bomb calorimeter is a device used to quantify the HHV of a biomass fuel by measuring the heat released during the burning of a specific amount of biomass sample. Following each test, a small amount of sample fuel is crushed and diluted to fit into a capsule for bomb combustion. bomb thermometer a device that is mostly used to measure combustion temperatures. The reaction occurs in a sealed area known as the calorimeter proper, in constant thermal contact with its surroundings (the jacket). The reaction occurs in the water in the coffee cup calorimeter. The reaction. occurs in an enclosed. metal container. in a bomb calorimeter.

Question:

What does a bomb calorimeter measure quizlet

Learn more about bomb calorimeter here:

https://brainly.com/question/24245395

#SPJ4

The pressure would be double that at the surface when 10 m under the surface of a body of water.

The deeper you go under the sea, greater is the pressure of the water pushing down on you. For every 33 feet (10.06 meters) you go down,  pressure increases by one atmosphere

At sea level, pressure of the air that surrounds us is equal to 1 atmosphere. Diving 10 meters deep causes pressure to be doubled as water is much denser than air, it exerts a greater compressive force on your body.

To know more about pressure at depth, refer

https://brainly.com/question/26101731

#SPJ4

The element could be Nitrogen.

Here given Element M react with oxygen to form M₂O.

The oxidation no of oxygen is -2. Hence to balance there is two metal. So the oxidation no of M should be +1

Here the M₂O is formed by only nitrogen.

So the compound will be N₂O.

SO when N₂O react with water then it will produce an anion (N₂O⁻ ). This N₂O⁻  dissociates with nitrogen gas and O⁻  ion.

This anion then produce OH⁻ ion when react with water.

So the solution becomes basic.

Hence the element could be Nitrogen.

Learn more about nitrogen here:- https://brainly.com/question/13629381

#SPJ4

The formula of hydrotelluric acid is H₂Te

Hydrogen telluride is an inorganic compound. It is a hydrogen chalcogenide, the simplest hydride of tellurium, and is a colorless gas. Hydrogen tellurium, also known as hydrotelluric acid, terane, and tellurium hydride, is a chemical compound. It's also an acid. It is a covalent compound due to the small electronegativity difference between tellurium and hydrogen.

Hydrogen telluride is a toxic reactive gas. It easily decomposes into hydrogen and tellurium. It also burns in air to produce tellurium dioxide and water. The H-Te-H angle is approximately 90°. Volatile tellurium compounds often have an unpleasant odor reminiscent of rotten onions and garlic.

Learn more about the telluric acid in

https://brainly.com/question/29397392

#SPJ4

Francium is an alkali metal with atomic number 87 is present in seventh period.

As we go down the group, the number of shells are added and the gap between nucleus and electrons in valence shell increases.

which means the electron in outer most shell, experiences more shielding.

Or we can say that electron in outer most shell experiences less attraction to the nucleus.

This means, the outer most valence electron is easy to remove in case of Francium than any other elements of group 1.

Also, Francium has the lowest electronegativity and with largest atomic radius.

So removal of its valence electron is easy making Francium as the most reactive metal.

And this is the reason why, the most reactive metal on the periodic table is francium.

To know more about Francium:

brainly.com/question/2290590

#SPJ4

The charge on the Lewis acid is +3 which means option d is the correct choice.

A Lewis Structure is a completely simplified illustration of the valence shell electrons in a molecule. It is used to expose how the electrons are organized round character atoms in a molecule. Electrons are proven as "dots" or for bonding electrons as a line among the 2 atoms.

As we know in a coordination compound metal atoms or ions are Lewis acid . So, here Cobalt is Lewis acid .

Now , the charge of ethylenediamine (en) is 0 , the charge of Cl is -1 . Let the charge on Co be X . Then as overall compound is neutral . So,

1 × X + 2 × 0 + 3 × -1 = 0

X - 3 = 0

X = +3

So, the charge on Lewis acid (Co) is +3 . So, correct answer is d). +3

To learn more about charge check the link below:

https://brainly.com/question/18102056

#SPJ4

900J energy is required to raise the temperature of from 273K to 298K.

Knowing the mass of the substance, the change in the system's temperature, and the substance's specific heat capacity will allow you to compute the quantity of heat transmitted in a given system.

Given in the question:

Specific heat capacity, c = 0.24J/[tex]g^{0}[/tex]c

Mass, m = 150.0g

initial temperature, [tex]T_{1}[/tex] = 273K = [tex]0^{0}C[/tex]

Final temperature, [tex]T_{2}[/tex] = 298K = [tex]25^{0}C[/tex]

The heat absorbed (q) by the system is calculated as follows:

=> [tex]q = cm(T_{2}-T_{1})[/tex]

=> [tex]q = 0.24J/g^{0}C \times 150.0g(25^{0}C-0^{0}C)[/tex]

=> [tex]q = 900J[/tex]

Learn more about specific heat capacity:

brainly.com/question/29766819

#SPJ4

In this reaction the oxidation number of hydrogen increases that is oxidation of hydrogen and the reduction of Copper occurs.

Any chemical process in which a participating chemical species' oxidation number changes is an oxidation-reduction reaction, often known as a redox reaction.

It is also clear that this is a reduction reaction because the oxidation number for copper decreases from +2 in Cu2+ to 0 in copper. Since oxidation involves the loss of electrons, 2H2O is oxidized when it loses 4 electrons to create O2.

The given reaction is :

CuO + H₂ = Cu + H₂O

in this reaction the oxidation number of hydrogen increases that is oxidation of hydrogen and the reduction of Cu occurs.

To know more about oxidation you may visit the link:

https://brainly.com/question/9496279

#SPJ4

If glucose is substituted with whole blood that is the same density but has a viscosity that is 2.50 times that of glucose, the new flow rate will be 1.60cm3/mm.

Q=V/t

Q=Av

R=8ql/πr⁴

Q=P₂ -P₁/R

Q=(P₂ -P₁)πr⁴/8ql

(P₁+(1/2)ρv²+ρgh)Q=power

P₁+(1/2)ρv₁²+ρgh₁=P₂+(1/2)ρv₂²+ρgh₂

Q[tex]_{g}[/tex]R[tex]_{g}[/tex]=Q[tex]_{b}[/tex]R[tex]_{b}[/tex]

Q[tex]_{b}[/tex]=Q[tex]_{g}[/tex]R[tex]_{g}[/tex]/R[tex]_{b}[/tex]

=4.00/2.5=1.60cm³/mm

Viscosity is a fluid's (liquid or gas) resistance to a change in shape or motion of adjacent parts with respect to one another. Viscosity indicates resistance to flow.

viscosity is the ability of a fluid (liquid or gas) to resist change in form or motion of adjacent parts with respect to one another. Viscosity indicates resistance to flow. The fluidity, which measures how easily something may flow, is the reciprocal of viscosity. The viscosity of molasses, for instance, is higher than that of water. Viscosity can be thought of as internal friction between the molecules; this friction prevents the development of velocity disparities within a fluid since a section of a fluid that is compelled to move carries along nearby parts to some degree.

Learn more about Viscosity here:

https://brainly.com/question/2193315

#SPJ4

The bond angle formed by an equatorial atom is 90 degrees and the axial atom is 180 degrees.

Bipyramidal alludes to two pyramids, Above and underneath the center particle are the axial atoms and These are the "pyramid points" that the molecule forms. The pyramids ought to be visible in connection to the bottom and top parts of the central atom. The particles that are found within the horizontal plane of the Centre atom are known as equatorial atoms. The axial and equatorial atoms  bond angles are 90 degrees.The equatorial atoms have 120-degree binding angles with one another.

To know more about bond angle  refer to the link  brainly.com/question/13751116

#SPJ4

Answer: Chemical Mole Gram Calculator. Chemical Formula: (Optional). Molar Mass: Weight: g, kg, ton, mg, ug, ng, pg, Carat[metric], Stone, Ounce(Oz), Grain, Pound

Missing: 7.00 ‎| Must include: 7.00

Explanation:

The coefficient of fe(oh)2 in the balanced redox equation is 2.

What is redox reaction?

Any chemical reaction in which a participating chemical species' oxidation number changes is known as an oxidation-reduction reaction, often known as a redox reaction.

[tex]BrO- + H2O + 2e- > Br- + 2OH-[/tex]

[tex]Fe(OH)2 + OH- > Fe(OH)3 + e-[/tex]

[tex]BrO- +H2O + 2Fe(OH)2 = Br- +2Fe(OH)3[/tex]

The way of balancing is as follows

Step 1) divide the equations into two half reactions

oxidation half reaction                reduction half reaction

Fe(OH)2  --> Fe(OH)3                   BrO-  --> Br-

Step 2) balance atoms other than oxygen and hydrogen

Fe(OH)2  --> Fe(OH)3                    BrO-  --> Br-

Step 3) add OH- ions ,where the oxygen atoms are deficient, add the H2O molecules in required number to balance H atoms

 Fe(OH)2 + OH- --> Fe(OH)3            BrO-+H2O --> Br- + 2OH-

Step4) now add required number of electrons to balance the charge. don't forget the number of electrons loss in oxidation half reaction= the number of electrons gain in reduction half reaction

[tex]2Fe(OH)2 +2OH- -- > 2Fe(OH)3+2e-[/tex]

[tex]BrO- + H2O +2e--- > Br- + 2OH-[/tex]

Step5) now add the both half reactions ,re write

BrO- +H2O + 2Fe(OH)2 = Br- +2Fe(OH)3.

Therefore, the coefficient of fe(oh)2 in the balanced redox equation is 2.

To learn more about redox reaction from the given link.

https://brainly.com/question/21851295

#SPJ4

The molecule or compound that exhibits dipole-dipole forces as its strongest intermolecular force is SO₂.

the correct option is A.

Intermolecular forces are forces that exist between molecules of the same compound and which are responsible for several physical properties of substances such as boiling and melting points.

Some of the intermolecular forces that exist between molecules of compounds include:

The strongest intermolecular force is the ion-dipole force.

Considering the intermolecular forces present in the given compounds:

SO₂ - has  London dispersion forces and dipole-dipole forces

Cl₄ - has London dispersion forces

BCl₃ - has London dispersion forces

Br₂ -  - has London dispersion forces

H₂O -  - has London dispersion forces, dipole-dipole forces, and hydrogen bonding

Learn more about intermolecular forces at: https://brainly.com/question/12243368

#SPJ1

Mendeleev’s periodic table is an arrangement of elements in an increasing atomic mass order in a tabular form.

The elements are arranged in Mendeleev's periodic table in a tabular format, increasing atomic mass order to represent similarities and patterns in the behavior of the elements.

In the beginning, Mendeleev organized the elements in ascending order of atomic weight. Nearby elements with related characteristics are positioned. In the same horizontal row, elements are located that have comparable characteristics.

The gaps that Mendeleev left in his table were one of its distinctive features. He not only anticipated the existence of yet-undiscovered elements within those locations, but also their atomic weights and other properties.

Mendeleev's periodic table organizes the elements according to their atomic mass, meanwhile the Modern Periodic Table does it according to their atomic number. This is the fundamental distinction between the two periodic tables.

Learn more about Mendeleev’s periodic table :

https://brainly.com/question/3202992

#SPJ4

Answer:

The answer is 17.03052.

Explanation:

I assume you are converting between grams NH3 and mole.

d)chondrocyte. The extracellular matrix (ECM) is preserved by chondrocytes, who also create the cartilage matrix. Chondrocytes, which are encircled by collagenous fibers, emit chemicals.

That give cartilage its strength and flexibility. In general, chondrocytes are present in all types of articular cartilage, including intervertebral discs (AC). The only type of specialized cell found in cartilage tissue are chondrocytes. Chondrocytes are the cells that produce cartilage and are essential for the endochondral ossification process, which is important for bone growth. Additionally, chondrocytes play a crucial role in fracture repair by imitating skeletal growth. The cartilage matrix is created and maintained by chondrocytes. They are essential for maintaining the AC joints' homeostasis and providing cushioning for joint motion. Chondrocyte enlargement and the production of proteolytic enzymes result in cartilage degradation. These enzymes that break down the ECM include matrix metalloproteinases (MMPs) and A Disintegrin and Metalloproteinase with Thrombospondin Motifs (ADAMTS).

Learn more about chondrocyte here:

brainly.com/question/12177543

#SPJ4

The spikes in the IR spectrum are referred to as absorption bands. A carbonyl group (C=O) is indicated by a prominent absorption band in the 1650–1750 cm-1 range. In the IR spectrum of polysaccharide, a prominent and broad band at 3600-3000 cm1 is frequently observed.

What is spectra?

The intensity of the absorption bands in IR spectra can be classified as strong (s), medium (m), weak (w), broad, and acute. The polarity of the bond affects the intensity of an absorption band, therefore a bond with higher polarity will exhibit a more intense absorption band. In general, the characteristic weak but distinct IR absorbance bands in the 2100-2250 cm-1 region can be used to identify alkynes.

To learn more about alkynes from given link

brainly.com/question/23508203

#SPJ4

During the Lewin's changing stage, managers should 'give employees the tools for change.'

Lewin's change theory presents a simple and easy-to-understand framework to reinforce the change management process. These three different stages of Lewin's change theory include unfreeze, change, and refreeze,  allowing you to plan and implement the required change. It is the changing stage of Lewin's model where it is required to give the employees the tools for change, i.e. new perspectives, new information, and new models of behavior with the implementation of change.

"

This is a fill in blank question and the complete question is as follows:

During Lewin's changing stage managers should ____________ .

"

You can learn more about Lewin's Model  at

https://brainly.com/question/4201107

#SPJ4

SO2 is polar and SO3 is non - polar because of substituent differences and especially because of geometry.

When things are different at each end then we call them as polar. Some molecules have both positive and negative ends, then we call them polar. If they don't have then we call them non-polar. Things that are polar attract and repel each other.

As SO2 is bent, therefore the dipoles do not cancel and the molecule is polar. The difference in electronegativity between sulfur and oxygen is enough for dipole moments to form but the geometry of sulfur trioxide cancels their effects, making the molecule a nonpolar.

To know more about polar and non - polar molecules, refer

https://brainly.com/question/1426521

#SPJ4

Electrostatic attraction hold ionic solids together.

What is Electrostatic attraction?

To understand the word ‘Electrostatic appeal’, we need to first revise the fundamentals of the Electrostatic area. It says that similar costs (like positive & tremendous) repel each other and distinct fees (like fine and negative) appeal to each other.

Electrostatic appeal is a force of enchantment which is exerted through two in contrast to or numerous (contrary) expenses on each different whilst they may be stored at some finite distance aside. That is additionally referred to as contactless appeal between  contrary prices or we are able to say this Electrostatic pressure attracts  distinct expenses with out touching them.

The concept of electrostatic pressure turns into clearer if we remember a sensible instance. If we convey North Pole of a magnet near to North Pole of another piece of magnet then those  portions of magnet will repel every different and if we carry North Pole of one magnet close to the south pole of some other piece of magnet then they may entice to every other.

As we know those atom donate the electron gets positively charged and those atoms gains the electron gets negatively charged. The charge on the atoms are the responsible for the force in the ionic bond.

We know that force between two charge particle is known as electrostatics force. If charge particle is having same sign charge then it will be repulsive force and If charge particle is having opposite sign charge then it will be attraction  force.

Learn more about Electrostatic Attraction from given link

https://brainly.com/question/16871517

#SPJ4

Answer:

The equation you provided is an example of a chemical reaction in which nitrogen gas (N2) and hydrogen gas (H2) react to form ammonia (NH3). The Law of Conservation of Mass states that matter cannot be created or destroyed, only transformed from one form to another.

In this reaction, the total number of atoms on the reactant side (left side of the arrow) is equal to the total number of atoms on the product side (right side of the arrow). Specifically, there are 2 nitrogen atoms, 6 hydrogen atoms, and 2 ammonia molecules on the reactant side, and these atoms are rearranged to form 2 nitrogen atoms, 6 hydrogen atoms, and 2 ammonia molecules on the product side.

This demonstrates that the total mass of the reactants is equal to the total mass of the products, which is a key principle of the Law of Conservation of Mass. This law is a fundamental concept in chemistry that helps us understand how chemical reactions take place and how atoms are transformed from one form to another.

The pH of the buffer solution is found to be 0.22.

The balance chemical equation of the reaction is,

HC2H3O2 + NaHCO3 = NaC2H3O2 + CO2 + H2O.

From the above reaction it is clear that one mole of HC2H3O2 is reacting with one mole of NaHCO3 completely.

We know the moles of a solution are given by,

Moles = molariy x volume

Because the volume of HC2H3O2 and NaHCO3 are equal.

We can write,

Final moles = (0.8M-0.2M)V

Final moles = 0.6M.

Now at the end of the reaction 0.6 M concentration HC2H3O2 is remaining.

So the pH of this buffer solution will be given by,

pH = log[C]

C is concentration,

pH = -log[0.6]

pH = 0.22

So, the pH of the buffer solution is 0.22.

To know more about pH of buffer solution, visit,

https://brainly.com/question/22390063

#SPJ4

Both have a bond order of +12, both Be+2 and Be−2 will exist in gas phase. The Be2bond +'s order is Because the bond orders of Be2+ and Be2 are both 1/2,

which are both negative and positive, the bond order of Bez is 0 and can exist in the gas phase. A molecular orbital diagram, often known as a MO diagram, is a qualitative descriptive tool used to explain chemical bonding in molecules using the linear combination of atomic orbitals (LCAO) approach and general molecular orbital theory. These theories are based on the fundamental idea that as atoms join together to form molecules, a specific number of atomic bond order combine to create the same number of molecular orbitals, even though the orbitals' electrons may be distributed differently. When discussing even comparatively simple  bond order polyatomic compounds, like methane, this method gets more complicated. It works very well for simple diatomic molecules like dihydrogen, dioxygen, and carbon monoxide.

Learn more about bond order here:

brainly.com/question/2516145

#SPJ4

As the term "peroxide" is used in Chapter 10 it can refer to RCOOCR structure.

Hydrogen peroxide solutions up to 9% in concentration are often safe when consumed; nonetheless, even a 3% solution is slightly irritating to nasal mucosa and might result in vomiting and diarrhea. Industrial-strength solutions (10%) when consumed induce systemic toxicity and have been linked to deaths.

The fact that oxygen is an anion and hydrochloric acid is a chemical substance is the main distinction between the two peroxides. The specific class of oxygen compounds known as peroxides has distinctive characteristics. Thenard, a French chemist, made the discovery of hydrogen peroxide in 1818.

To know more about peroxide visit:

https://brainly.com/question/29102186

#SPJ4

At 46⁰C and 0.880 atm pressure, a gas occupies a volume of 0.600l, It  will occupy 1.643 L at 0°C and 0.205 atm.

PV = nRT is the equation for an ideal gas. P is the ideal gas's pressure, V is the ideal gas's volume, n is the entire amount of ideal gas, expressed in moles, R is the universal gas constant, and T is the temperature.

Given that,

Pressure (P₁) = 0.88 atm

Volume (V₁) = 0.6 L

Temperature (T₁) = 46⁰C = 319 K

Pressure (P₂) = 0.205 atm

Volume (V₂) = ?

Temperature (T₂) = 0⁰C = 273 K

Using ideal gas equation:

P₁V₁/T₁ = P₂V₂/T₂

or, (0.88) × (0.6) / 319 = (0.275 × V₂) /273

or, V₂ = 1.643 L

Thus, it will occupy 1.643 L at 0°C and 0.205 atm.

To know more about volume refer to:

https://brainly.com/question/27100414

#SPJ1

FeCl3 is produced when eugenol acetate and KMnO4 are combined.

Eugenol comprises two oxygen atoms, a bulky structure, and can react with an ester to produce eugenyl acetate. In comparison to eugenol, eugenyl acetate has a larger structure and more oxygen, which optimizes the process of fuel combustion.

Eugenol has been used extensively in dentistry to alleviate pulpitis and toothaches (7). Eugenol may be a perfect natural ingredient for use in dental care products, according to a prior study. Eugenol prevents S. from growing and from producing both soluble and insoluble glucans.

To know more about eugenol visit:-

https://brainly.com/question/5617857

#SPJ4