Circuit you ultimately want to measure the power dissipation of the 2.0 is The sum of the voltage drops across each resistor is zero.
Apply the Kirchhoff’s Voltage law to the above two loops.
For Loop 1
2 - i1 + 2i2 - 4 - i1 = 0
i2 - i1 = 2
For loop 2
4 - 2i2 + i3 - 4 + i3 = 0
i3 = i2
The sum of the voltage drops across each resistor is zero. The sign of the higher potential is taken as positive and the sign of the lower potential is taken as negative.
The sum of the voltage drops across each resistor is zero. The sign of the higher potential is taken as positive and the sign of the lower potential is taken as negative.
The voltage drop in an electrical circuit is the reduction in electrical potential along the current's course. Voltage drops across conductors, contacts, and connectors are undesirable because they result in energy loss from the source's internal resistance, conductors, and contacts. The amount of power available to be transformed in that load to another useable form of energy is inversely correlated with the voltage drop across the electrical load.
For instance, an electric space heater might have a resistance of ten ohms, whereas the wires that power it might have a resistance of only two ohms, or about 2% of the circuit's total resistance. This indicates that 2% or more of the supplied voltage is wasted in the wire itself. Voltage drops could be too great.
Learn more about voltage drops here:
https://brainly.com/question/28982001
#SPJ4
a wheel with a diameter of 44 cm is rotating as a constant speed with a and takes 0.68 seconds to complete each revolution. how many seconds does it take the wheel to turn through 110o?
The wheel will take 0.207 seconds to turn through 110°.
Wheel is a circular object that rotates on an axis and is fixed under a vehicle or other object so that it can move easily on the ground.
one complete revolution = 2[tex]\pi[/tex] radian
one revolution = 6.28 rad
1° = [tex]\pi[/tex] / 180 radians
110° = 110 * ([tex]\pi[/tex] / 180) radians
110° = 1.92 radians
The wheel take 0.68 seconds to cover 6.28 radians.
Time taken by the wheel to turn through 110° = Time taken to cover 1.92 radians.
Using unitary method,
Since 6.28 radians require 0.68 sec
1.92 radians will require 'x' sec
x = (0.68 * 1.92) / 6.28
x = 0.207 sec
0.207 seconds does it take the wheel to turn through 110°.
To know more about wheel,
https://brainly.com/question/14486424
#SPJ4
a car travels 11.8 m north and then travels 13.3 m east. what is the magnitude of the car's displacement?
The magnitude of car's displacement is 17.78 m.
Given that, distance travelled due north is 11.8 m
Distance travelled due east is 13.3 m
As it is said that the car travels north and then east, it forms the two sides of a right-angled triangle. The magnitude of third side is the magnitude of car's displacement.
From Pythagoras theorem, the expression for car's displacement can be written as,
AC² = AB² + BC²
where, AB and BC are the sides of the right triangle
AC is the displacement of the car
Making AC as subject, we have,
AC = √(AB² + BC²) = √(11.8² + 13.3²) = √(139.24 + 176.89) = 17.78 m
Thus, the magnitude of car's displacement is 17.78 m.
To know more about displacement:
https://brainly.com/question/23898108
#SPJ4
what is the angular speed in rad/s of the second hand of a watch
The angular speed of the second hand of a watch is:
w = 0.105 rad/s
What is the angular speed of the second hand of the watch?
We know that the whole watch (a common circle) has a 2*pi rads on its circumference.
Now, there the second hand completes these 2*pi radians in one minute (60 seconds)
The angular speed is equal to the quotient between the angular motion (2pi radians) and the time in which that happens (60 seconds)
Remember that pi = 3.14
Then the angular speed is:
w = (2*3.14 rad)/(60 s) = 0.105 rad/s
Learn more about angular speed:
https://brainly.com/question/6860269
#SPJ1
you are attempting to create a standing wave with n = 7 in a pipe .50m in length and filled with air. the top of the pipe is open to the ait and the bottom of the pipe is barely submerged in water and thus closed. draw the diagram for this standing wave with the proper nodes and antinodes for this open- closed pipe. what is the frequency?
The top of the pipe is open to the air and the bottom of the pipe is barely submerged in water and thus closed is 1200.5Hz
[tex]Wavelength =[/tex] λ = [tex]\frac{4L}{7}[/tex]
[tex]Frequency =[/tex] v× 1/λ = 343 ×[tex]\frac{1}{4l/7}[/tex]
[tex]f[/tex] = [tex]\frac{7*343}{4L}[/tex] = [tex]\frac{7*343}{4*0.5}[/tex] = [tex]f = 1200.5Hz[/tex]
In physics, the wavelength is the spatial length of a periodic wave—the distance over which the wave's form repeats. it is the space between consecutive corresponding factors of the same section on the wave, consisting of adjoining crests, troughs, or 0 crossings, and is a characteristic of both visiting waves and standing waves, in addition to other spatial wave patterns. The inverse of the wavelength is known as the spatial frequency. Wavelength is generally particular via the Greek letter lambda (λ). The time period wavelength is likewise once in a while applied to modulated waves, and to the sinusoidal envelopes of modulated waves or waves shaped by means of interference of several sinusoids.
Assuming a sinusoidal wave transferring at a hard and fast wave velocity, the wavelength is inversely proportional to the frequency of the wave: waves with better frequencies have shorter wavelengths, and lower frequencies have longer wavelengths.
To learn more about Wavelength visit here:
brainly.com/question/13533093
#SPJ4
a student rolls two balls off of a table. ball a has twice the mass of ball b. both balls leave the table with the same starting velocity. which ball will land further away from the table? (air resistance is negligible.)
Student rolls two balls off of a table and ball A has twice the mass of ball B. Both balls leave the table with the same starting velocity, then they will land the same distance away from the table.
What is projectile motion?Projectile motion is a form of motion experienced by an object that is projected in gravitational field and moves along a curved path under the action of gravity only.
Projectile motion can be said as the motion of an object thrown or projected into the air and subject to only the acceleration of gravity. The object is known as a projectile and its path is called trajectory.
To know more about projectile motion, refer
https://brainly.com/question/24216590
#SPJ4
a coal barge 1000 ft long and 100 ft wide is submerged a depth of 12 ft in water. it is being towed at a speed of 5 ft/s. estimate the friction drag on the barge (in lbf). water density
A 1000 foot long by 100 foot broad coal barge is submerged in 12 feet of 60 degree water. Estimate the friction drag if the vehicle is being pulled at 12 mph. It is being dragged at a 5 ft/s speed.
What is friction drag?
The water density of the barge's friction drag. In 60 feet of water, a coal barge that is 1000 feet long and 100 feet wide is submerged. It is being towed at a 12 mph speed. A flat-bottomed barge that was 80 feet long and 35 feet broad was submerged. A 1000 foot long by 100 foot wide coal barge is immersed in water that is 12 feet deep. It is being dragged at a 5 ft/s speed.
To learn more about immersed from given link
brainly.com/question/14522604
#SPJ4
the law of reflection states that when light rays reflect off a surface the angle of incidence a. is one-half the angle of reflection. c. is twice the angle of reflection. b. equals the angle of reflection. d. equals the angle of refr
The law of reflection states that when light rays reflect off a surface the angle of incidence is equal to the angle of reflection.
The process by which light rays strike a surface and are reflected back is called light reflection.
The laws of reflection is the principle or rule that governs the phenomenon of light reflection.
The law of reflection states that a ray of light will bounce off a surface at the same angle at which it struck it when it comes into contact with it. The angle at which the light ray strikes the surface is known as the angle of incidence and the angle at which the light ray reflects from the surface is known as the angle of reflection. The law can also determine how the light beam will behave.Therefore according to the law of reflection, the angle of incidence is always equal to the angle of reflection.
To know more about law of reflection,
https://brainly.com/question/18556561
#SPJ4
Why is impulse a vector?
Answer:
Impulse is defined as, It is defined as the product of net force and the length of time it was applied. As we know that momentum and force are both vectors, therefore impulse is also a vector.
explanation:
Since force is a vector quantity, impulse is also a vector quantity. Impulse applied to an object produces an equivalent vector change in its linear momentum, also in the resultant direction.
Sam's job at the amusement park is to slow down and bring to a stop the boats in the log ride.
Part A
If a boat and its riders have a mass of 800 kg and the boat drifts in at 1. 4 m/s how much work does Sam do to stop it?
The amount of work which Sam does need to stop the boat is 784Joule if boat mass is 800kg and boat drift in 1.4m/sec.
We know that according to work-energy theorem, change in kinetic energy of the body from one speed to another is equivalent to amount of work done by all forces acting on the body.
So, here we can see that final speed of boat is =0m/sec since Sam need to stop it.
Initial speed of boat is 1.4m/sec.
Also, we know that kinetic energy is given by the below formula:
Kinetic energy=(1/2)mv²
where m is the mass of the body
and v is the speed of the body
Now, from work energy theorem, we get
=>W=(1/2)m[tex]v^2_2[/tex] - (1/2)m[tex]v^2_1[/tex]
=>W=0-(1/2)×800×(1.4)²
=>W= - 400× 1.4 × 1.4
=>W = -400×1.96
=>W= -784Joule
Here negative sign denotes work has to done against the original motion of boat.
Hence, amount of work needs to be done by Sam is 784Joule.
To know more about work,visit here:
https://brainly.com/question/18094932
#SPJ4
a 1000 n crate is lifted to a height of 3.0 m . how much work is done to lift the crate?
The work done by the crate to raise the barrel was found t be about 3000J.
How to calculate work done?
Work is a measure of the energy it takes to move an object; most often force times distance.
It is said that "things that don't move have no merit". Work done can be calculated by multiplying the force by the distance traveled as follows:
Work done = Force × distance
According to this question, a box of 1000N is raised to a height of 3.0m. The work done on the barrel is calculated as follows
W = 1000x3 = 3000J
so the work done for lifting the crate was found to be 3000J
To learn more about work done follow the given link:https://brainly.com/question/10049331
#SPJ1
suppose etienne wants to calculate the velocity of the mass in the simulation, given the period, t, mass, m, and spring constant, k. why does hakim say it is not possible to use the kinematic equation v
There is currently no established method that can replicate gravity other than actual mass or acceleration.
The mass physics classroom's focal point is...
The location of the mass's center A position relative to an object or set of objects is known as the center of mass. It is the system's average location, weighted by the mass of each component. The center of mass is situated at the centroid for straightforward stiff objects with homogeneous density.
Mass simulation: what is it?
By 1800, the concept of denudation—the surface lowering of the land caused by mass waste and erosion—had been developed. It is implied by the term "planation" that denudation will continue until the land is reduced to a low plain just above the base level of erosion, which is usually the sea.
To know more about mass simulation visit;
https://brainly.com/question/15740734
#SPJ4
g what is the decibel level of a sound that is seven times as intense as a 65.7 db sound? db (b) what is the decibel level of a sound that is one-fourth as intense as a 65.7 db sound?
The decibel level of sound for intense of seven times and one fourth is 2.98 and 0.74 dB level.
We use a unit of measurement called the decibel (dB) to measure the noise level of various sounds. Represents the intensity of the sound. We use hertz (Hz) to measure the frequency of sound.Every time the decibel level of a sound increases by 10, its intensity is multiplied by 10. However, the decibel scale is logarithmic, not linear. Therefore, a sound of 10 dB is 10 times more intense than a sound of 0 dB, a sound of 20 dB is 100 times more intense, and a sound of 30 dB is 1000 times more intense.ds=65.7 dl
=65.7/22=2.98
We use the decibel scale to determine how loud sounds are and whether they are safe or harmful to human hearing. The range of sounds measured on the decibel scale is from 0 dB (the quietest sound) to 140 dB i.e. the pain threshold.ds'=2.98/4=0.74
Sounds above 85 dB are considered dangerous to human hearing by specialized organizations such as NIOSH (US National Institute for Occupational Safety and Health). This means that sounds above this level can result in hearing damage or hearing loss depending on the length of your exposure.To learn more about noise level -
https://brainly.com/question/17157610
#SPJ4
a boxer rides with a punch so as to reduce__
which one?
force; speed; impulse; or momentum
A boxer rides with a punch so as to reduce force.
Force is an external influence that can change the velocity or motion of an object.
It can also be defined as the product of mass and acceleration.Mathematically, force F = m*aForce is also the amount of impact the object suffers due to another body's action.
Speed is the rate of change of distance w.r.t time, which cannot affects the boxer in any format
Impulse is force times the time interval which does not defines the impact.
Momentum is the product of mass and velocity which does not satisfies the boxer's condition while punching.
Therefore only force is the suitable answer, i.e. a boxer rides with a punch so as to reduce force.
To know more about force,
https://brainly.com/question/19053790
#SPJ4
how much heat needs to be removed from 100 g of 85°c water to make -5°c ice?
The amount of heat that needs to be removed from 100 g of 85°c water to make -5°c ice is 70194 J of heat.
What is the heat change when 100 g of 85°C water changes to -5°C ice?The amount of heat that needs to be removed is calculated below.
Heat changes involved are as follows:
Heat change from water at 85°C to water at 0°C = mc₁ΔT₁
Heat change from water at 0°C to ice at 0°C = mL
Heat change from ice at 0°C to ice at -5°C = mc₂ΔT₂
where
m is mass = 100 g
c₁ is the specific heat capacity of water = 4.184 J/g/K
ΔT₁ is temperature change = 85°C
L is the latent heat of fusion of ice = 336 J/g
c₂ is the specific heat capacity of ice = 2.06 J/g/K
ΔT₁ is temperature change = 5°C
Heat change = (100 * 85 * 4.184) + (100 * 336) + (100 * 5 * 2.06)
Heat change = 70194 J
Learn more about heat changes at: https://brainly.com/question/24298104
#SPJ1
if the astronaut was instead standing on the mon, woul dit required more, less, or the same amount of energy to escape the system?
The mass and size of the moon also affect its gravitational pull. The moon won't draw things toward itself with the same force as the Earth because it has a lot less gravity than the latter.
What causes gravitational pull?The fact that spacetime actually bends and curves due to the mass of all objects, including our Earth, is what enables gravity to draw you toward the ground. That curvature is what you perceive as gravity. The magnitude of gravity's influence increases with the number of masses (also called the gravity force).
What intensifies the gravitational pull?According to Newton's law, the strength of gravity or between two materials is determined by their mass and distance from one another. Greater gravitational attraction exists between heavier things.
To know more about Gravitational pull visit:
https://brainly.com/question/13467280
#SPJ4
Alpha waves signify ________ sleep.
Alpha waves signify deep sleep.
Alpha waves are brain waves that are associated with relaxed alertness. They have a frequency of 8-13 Hz, which makes them the slowest of the frequency bands. They are most commonly seen in awake adults who are in a relaxed, awake state of consciousness. Alpha waves are associated with creativity, concentration, and relaxation.
Alpha waves are the most common type of brain wave, and they are associated with a relaxed, wakeful state of mind. Alpha waves are generally present during light meditation and relaxation and signify a state of relaxation and alertness. When alpha waves are present, the brain is in a state of deep relaxation, and this is when the body is able to repair itself and restore itself.
Find More: https://brainly.com/question/28779294?referrer=searchResults
#SPJ4
a car is traveling 16 m/s when the driver sees a child standing in the road. he takes 0.8 s to react, then steps on the brakes and slows at 7.0 m/s2. how far does the car go before it stops?
When driver see the child standing on road his speed is 20 m/s
So here at that instant his reaction time is 0.8 s
He will cover a total distance given by product of speed and time
d₁ = v*t
d₁ = 16 * 0.8
d₁ = 12.8
now after this he will apply brakes with acceleration a = 7 m/s^2
so the distance covered before it stop is given by
v(f)² - v(i)² = 2ad
0 - (16)² = 2 * (-7)* d₂
d₂ = 18.2
so the total distance covered by it
d = d₁ + d₂
d = 12.8 + 18.2
d = 31 m
Therefore, the distance covered before the car stops is 31 m
To know more about distance, refer: https://brainly.com/question/29396281
#SPJ4
a thin, circular hoop is released at the top of an incline that is 8:0 mlong and makes an angle of 370 above the horizontal. what is its speed at the bottom of the incline? assume it rolls without slipping. a. 5:5 m
The speed at the bottom of the incline is 6.87 m per second.
What is conservation of energy?The conservation of the energy is a fundamentally law of physics, chemistry stating that the total of the energy of an isolated by the system is constant despite internally changes. It is mostly common expressed as “energy can neither to be created nor destroyed”, and it is the basis of the first-ever law of the thermodynamics.
As per the given question
The length of the inclined plane L= 8.00m
angle of inclination is = 37°
Height of the inclined plane h= L sin ø
(8.00m) sin 37°
=4.814 m
Let's take m= mass of hoop
Let's take r=radius of hoop
Let's v be the velocity of the hoop bottom to the inclined plane.
Now we can apply conservation of energy at the top of the inclined plane and at to the bottom of the inclined plane.
mgh = ¹/₂ mv²
mgh = ¹/₂ mv² + ¹/₂ Iω²
Where, I = moment of inertia
ω = angular velocity
I = L/ω
mgh = ¹/₂ mv² + ¹/₂ (L/ω)ω²
mgh = ¹/₂ mv² + ¹/₂ Lω
mgh = ¹/₂ mv² + ¹/₂ mvrω
ω = vr
mgh = ¹/₂ mv² + ¹/₂ mvrvr
gh = ¹/₂ v² + ¹/₂ (vr)²
gh = ¹/₂v² (1 + r²)
v=gh
v=√(9.8m/s^2)(4.814m)
v=6.87 m/s
To know more about speed click-
https://brainly.com/question/13943409
#SPJ1
a sinusoidal electromagnetic wave from a radio station passes perpendicularly through an open window that has area 0.500 m2. at the window, the electric field of the wave has rms value 0.0400 v>m. how much energy does this wave carry through the window during a 30.0 s commercial?
Energy this wave carry through the window during a 30.0 s commercial is E = 8.2 x 10⁻⁵ J
calculation by using given data:Area = 0.5 m²A
electric field of wave = 0.0400 V/m
time = t =30 sA
intensity of electromagnetic wave
I=2ηcε∣E∣
c is speed of light
I = 4.24 x 10⁻⁶ W/m²
the amount of energy required
E = I A t
E = 4.24 x 10⁻⁶ x 0.5 x 30
E = 8.2 x 10⁻⁵ J.
What is the wave's strength?A wave's intensity (I) is calculated by dividing its rate of energy transfer by the surface area over which the energy is dispersed. The rate of energy flow per unit area is, in other words, what intensity is.
To know more about electromagnetic visit:-
https://brainly.com/question/17057080
#SPJ4
will the particle move to the right (in the positive x -direction) or to the left (in the negative x -direction), and why?
Yes, the particle moves in the positive x-direction (to the right) or the negative x-direction (to the left) due to the forces of attraction and repulsion.
When the particle's velocity is positive, it is travelling to the right. When the velocity is negative, it also moves to the left. A body with a higher mass may have a lower moment of inertia than a body with a lower mass. This relies on the mass distribution and axis with respect to which we are computing the moment of inertia. In real-world situations, we frequently avoid dealing with particles.
The time it takes for a constant force to bring a particle to rest, on the other hand, is represented by its momentum.
Learn more about moment of inertia here
https://brainly.com/question/15246709
#SPJ4
in a region of space, an electromagnetic wave moves to the right, as indicated in the above diagram. at one moment, the magnitude of the electric field at the indicated point is 2662, and its direction is out of the page. at this point and time, what is the magnitude of the associated magnetic field?
Given that the magnetic field is perpendicular to both the electrostatic potential and the electromagnetic wave, its strength will be equal to E/c, where c is the speed of light.
Why is electromagnetic energy used?Wire coils with electricity running through them are used to create electromagnets. The coils of copper in an electromagnet behave like a magnet when an electric current flows through them because moving charges produce magnetic fields.
Its name is electromagnetic for a reason.And we refer to these waves as "electromagnetic" because they include magnetic fields in addition to electric fields. We also refer to them as "waves" because, like all other waves that we have seen, they travel outward in accordance with wave equations.
To know more about Electromagnetic visit:
https://brainly.com/question/17057080
#SPJ4
for a projectile with initial velocity of 40.9 m/s and angle of elevation equal to 6 degrees. compute the horizontal velocity of the projectile in m/s. 40.6759 m/s compute the vertical velocity in m/s.
The horizontal and vertical components of the velocity are 41.1 m/s and 389 m/s respectively.
The initial velocity of the projectile = 40.9 m/s
The angle of elevation = 6°
The horizontal and vertical components of the velocity can be found using the formula,
Horizontal component, cosθ = v/vₓ
Vertical component , sinθ = v/vₙ
where θ is the angle of the elevation
v is the initial velocity
vₓ and vₙ are horizontal and vertical components of the velocity respectively.
Let us substitute the known values in the above equation. We get
Horizontal component:
cos 6° = v / vₓ
0.961 = 40.9 / vₓ
vₓ = 40.9/0.995
= 41.1 m/s
Vertical component
sin 6° = 40.9 / vₙ
0.105 = 40.9 / vₙ
vₙ = 40.9 / 0.105
= 389 m/s
Learn more about the velocity in
https://brainly.com/question/18084516
#SPJ4
Question 25 What major factor explains the quick adoption of new programs?O One political party supports the program.O The media draws attention to the particular issue. O The public does not hold a very strong opinion on the issue. O There are many interest groups active on both sides of the policy. O The public holds wide enthusiasm for a program. Question 18 1 p What is an important difference in our current political system compared to when the Constitution was created and ratified?O National leaders were only beholden to their own consciences in the past. O National leaders were more careerist and served in the legislature for several decades in the earlier era. O Politics was much more collegial in the previous era. O There was much more openness and transparency in the previous era.O There was much more accountability in the previous era.
The Major factor explaining the quick adoption of new programs is media draw attention to particular issue.
Our constitution gave our leaders enormous powers and didn't think about how to lead them.
Our Constitution says that 100 sinners may be released, but the innocent should not be punished and blindly obeyed.
Our Constitution contained no rule that the Constitution could be amended or amended only for a limited period of time, but under the strict guidelines of the Constitutional Commission, unlimited amendments were allowed. This provision for the government may prevent the government from doing other work. It also gave some good results.
As you can see in the preface above, “social, economic and political justice. Sometimes, what existed at the economic level is just a giveaway, even for the sake of the name.
To learn more about constitution -
https://brainly.com/question/19411179
#SPJ4
you fly from seattle, washington to salt lake city, utah and then from salt lake city to portland, oregon. describe the meaning of adding the two velocity vectors together for each trip. explain how you could estimate the total time the entire trip would take using the vectors.
One simple resultant vector is produced when two vectors are added. Depending on the quantity that the resultant vector represents, we can infer its meaning.
What is the best way to merge two velocity vectors?In order to directly sum the two velocities, we can use the formulae v tot = v x 2 + v y 2 v tot = v x 2 + v y 2 and = tan 1 (v y / v x) = tan 1 (v y / v x).
Adding vectors produces what outcome?A resulting displacement results from the addition of displacement vectors. The only requirement is that the two vectors must be of the same vector quantity in order to add them. There will be a consequent velocity if two additional velocity vectors are added. There is a resultant force when two vectors are added.
To know more about adding the two velocity vectors :-
https://brainly.com/question/11194474
#SPJ4
a centrifuge in a medical laboratory rotates at an angu- lar velocity of 3 600 rev/min. when switched off, it rotates through 50.0 revolutions before coming to rest. find the con- stant angular acceleration (in rad/s2) of the centrifuge.
the con- stant angular acceleration (in rad/s2) of the centrifuge is α = -226.2rad/s².
Calculation :
We know that ,
W² = W₀ + 2αΔФ , W = 0 so
α = -W₀²/2ΔФ = -[tex](\frac{2\pi *3600}{60} )^{2} *\frac{1}{2*2\pi *50.0}[/tex]
= -72.0π
α = -226.2rad/s²
Angular acceleration refers to the rate of change of angular velocity over time. Since there are two types of angular velocity, spin angular velocity and orbital angular velocity, there are of course two types of angular acceleration, spin angular acceleration and orbital angular acceleration. Spin angular acceleration refers to the angular acceleration around the center of rotation of a rigid body, while orbital angular acceleration refers to the angular acceleration of a point particle about a fixed origin.
Angular acceleration is measured in angular units per unit time squared (radians per second squared in SI units) and is usually represented by the symbol alpha (α).
Learn more about angular acceleration here : https://brainly.com/question/21278452
#SPJ4
A motorbike undergoes a constant acceleration from rest and travels a distance
of 60 m in 6.0 s.
What is the acceleration of the motorbike?
which one of the following statements concerning electromagnetic waves is false? (1.5 points) (a) electromagnetic waves carry energy. (b) x-rays have longer wavelengths than radio waves. (c) in vacuum, all electromagnetic waves travel at the same speed. (d) lower frequency electromagnetic waves can be produced by oscillating circuits. (e) they consist of mutually perpendicular electric and magnetic fields that oscillate perpendicular to the direction of propagation.
The incorrect option is (b) X-rays have longer wavelengths than radio waves
Visible light is the term used to describe radiation at wavelengths that humans can see. Your radio detects radio waves, which have much longer wavelengths than visible light. While visible light has a much longer wavelength than X-rays, the latter have much shorter ones.Radio waves are easygoing and weak. Mist can diffuse them, water can short them out, iron beams or plates can stop them. When they strike humans, they cause only a slight warming, unless kilowatts are directly focused on a body as in a microwave (which uses radio waves). We can communicate with the aid of radio waves, which are our friends.They manage to tear right through many materials, and if they do stop, they tear atoms apart into ions, molecules into fragments, often radicals. They can mutate DNA and have often terrible consequences on progeny if they strike sperm or egg cells. You can use X-rays to image a body’s insides, but you want to be very careful about it.To study more about X rays -
https://brainly.com/question/2833441
#SPJ4
Which of the following field is used by the EM waves?
a) Solar field
b) Polarized field
c) Electric field
d) Micro field
Answer:
d
Explanation:
In an electromagnetic field, the electric and magnetic fields are present in the form of waves in horizontal and vertical patterns. In order to be present in that pattern, it is necessary to have maximum amplitude.
ADVERTISEMENT
at a distance of 6 meters, a person with average vision is able to clearly read letters 1.0 cm high.
The height of the image that will be magnified on the retina will be 0.0022833m or .22833cm and it will be inverted.
What is magnification?
When anything is magnified, its seeming size is increased rather than its real size. This enlargement is quantified using a mathematical quantity called "magnification." When this number is less than one, a drop in size is frequently referred to as "magnification" or "de-magnification."
Briefing:
Given,
The distance of, u = 6 meters
The lens distance from the retina, v = 1.7 cm
The height of the object, hu = 1 m
We have to find the size of letters that appears in the retina, hv;
Here,
Magnification, M = -v/u = [tex]\frac{h_{v} }{h_{u} }[/tex]
- 0.017/6 = hv/1
hv = -0.017/6
hv = -0.002833m
The image height will be 0.002833 m and it will be inverted.
To know more about magnification visit:
https://brainly.com/question/21370207
#SPJ4
(-)-menthol and (+) menthol will have an α of the different magnitudes.
Yes, (-)menthol and (+) menthol will have an α of the different magnitudes
What is menthol?
Menthol is an organic compound, more specifically a monoterpenoid, synthesized or extracted from the oil of field mint, peppermint, or other mints.It is a waxy, clear or white, crystalline substance that is solid at room temperature, Melt slightly on top.
The major natural form of menthol is (-)-menthol, which is assigned the (1R,2S,5R) configuration. Menthol has local anesthetic and anti-irritant properties and is commonly used to soothe minor irritations in the throat. Menthol also acts as a weak kappa opioid receptor agonist. The (+) and (-) enantiomers of menthol are the most stable of these due to their cyclohexane conformation. All three bulky groups can be placed at the equator if the ring itself is in the chair conformation.
Yes, (-)menthol and (+) menthol will have an α of the different magnitudes
To know more about menthol, visit:
https://brainly.com/question/10983634
#SPJ4
