Gas pressure depends only on the number of particles in a given volume and on their average kinetic energy. The type of particle does not matter.a. trueb. false

statements that describe Diels-Alder reaction. are A. The reaction is initiated by heat. D. The reaction involves the formation of three new C-C σ bonds. E. The reaction is concerted.

The Diels-Alder reaction is initiated by heat or light and involves the formation of new C-C sigma (σ) bonds. It is a concerted reaction, meaning that the breaking of the π bonds and the formation of the σ bonds occur simultaneously. The reaction is exothermic, not endothermic, as it releases energy upon the formation of the new bonds. Therefore, statements B and C are incorrect.

Learn more about Diels-Alder reaction here:

https://brainly.com/question/30474400

#SPJ4

In the given reaction, carbon disulfide acts as an excess reagent and oxygen acts as a limiting reagent.

a) Oxygen is the limiting reactant.

b) 0.667 moles of carbon disulfide will still be present.

c) The formation of 0.333 moles of carbon dioxide and 0.667 moles of sulfur dioxide.

provided here,

To make 1 mole of carbon dioxide and 2 moles of sulfur dioxide from 1 mole of carbon disulfide, 3 moles of oxygen are required.

1.00 ol of carbon disulfide is the number of moles.

One mole of oxygen is equal to 1.00 mol.

The limiting reactant is oxygen. It will be totally eaten. (1.00 mol).

(B) An excess reactant is carbon disulfide. It will respond with

Oxygen reacts with 0.33 moles of carbon disulfide.

The extra reagent still present:

0.667 moles There will be a residue of carbon disulfide.

In order to make one mole of carbon disulfide and one mole each of carbon dioxide and sulfur dioxide, you need three moles of oxygen.

The carbon dioxide equivalent for 1 mole of oxygen is 1 mole/3, or 0.333 moles.

Sulfur dioxide is equal to 0.667 moles per 1.00 mol of oxygen (1.00 mol/(3/2)) mol.

Since carbon disulfide is an excess reagent in the above reaction, oxygen is a limiting reagent.

For more information on limiting agent kindly visit to

https://brainly.com/question/29505468

#SPJ1

Answer:

Explanation:

"Qc" stands for "Reaction Quotient Concentration" and represents the ratio of the concentrations of products raised to their stoichiometric coefficients, divided by the ratio of the concentrations of reactants raised to their stoichiometric coefficients at a given point in a chemical reaction.

Qc is used in comparison to "Kc," the "Equilibrium Constant Concentration," to determine the direction in which a chemical reaction at equilibrium will shift. If Qc is less than Kc, the reaction will shift in the direction that increases the concentration of products, so as to reach a new state of equilibrium with Kc. Conversely, if Qc is greater than Kc, the reaction will shift in the direction that increases the concentration of reactants, so as to reach a new state of equilibrium with Kc.

In other words, if Qc is equal to Kc, the reaction is at its state of equilibrium, and any changes to the concentrations of reactants or products will cause the reaction to shift until a new state of equilibrium is reached with the updated Kc value. If Qc is not equal to Kc, the reaction will shift until it reaches a state of equilibrium with the updated Kc value.

Answer:

because it provides a numerical value for the concentration of hydrogen ions in a solution.

Explanation:

Answer:

The pH scale is important in determining the acidity or basicity of a solution because it provides a numerical value for the concentration of hydrogen ions in a solution. The pH of a solution ranges from 0-14, with values below 7 being acidic, values above 7 being basic, and 7 being neutral.

Explanation:

Answer:

b. 500 m/s

Explanation:

According to the question the answer is 1.204 x 10^24 molecules of water.

Molecules are the smallest particles of matter that can exist in a stable form. They are made of two or more atoms that are held together by chemical bonds. Molecules are the basis of all living things, and they are the building blocks of all matter. They come in a variety of shapes and sizes, and they can be composed of atoms of different elements. Molecules can be found in the air, in liquids, and in solids. They can be found in both organic and inorganic compounds, and they are essential components of life. Molecules play an important role in many chemical and biological processes, and they can be used to create new materials and products.

The number of water molecules in a block of ice containing 2.00 mol of water (H2O) can be calculated using the Avogadro's number, which is 6.02 x 10^23 molecules per mol. Therefore, the answer is 1.204 x 10^24 molecules of water.

To learn more about molecules
https://brainly.com/question/475709
#SPJ1

The balanced equation for the reaction of pentane (C5H12) with oxygen gas (O2) to produce carbon dioxide (CO2) and water (H2O) is: C5H12(l) + 8O2(g) → 5CO2(g) + 6H2O(g).

Reaction is the process of responding to a stimulus or situation. It can be physical, emotional, mental, or social. Reactions can vary depending on the individual and the context, and they can be positive or negative. Examples of reactions include feeling anger, joy, sadness, or fear when faced with a situation.

The ratio of reactants to products in this reaction is 1:5:6:8. This means that for every 1 molecule of pentane (C5H12), 5 molecules of carbon dioxide (CO2), 6 molecules of water (H2O), and 8 molecules of oxygen gas (O2) are required. Therefore, the answer to the question is 8, as 8 molecules of oxygen gas (O2) are needed to react with 1 molecule of pentane (C5H12).

To learn more about reaction
https://brainly.com/question/25769000
#SPJ1

Answer:

0.54 M NaCl.

Explanation:

The final concentration of the mixture can be found using the formula for the dilution of a solution:

C1 * V1 + C2 * V2 = C_final * (V1 + V2)

where C1 and C2 are the initial concentrations of the two solutions, V1 and V2 are their volumes, and C_final is the final concentration of the mixture. Plugging in the given values, we get:

0.680 M * 279 mL + 0.450 M * 462 mL = C_final * (279 mL + 462 mL)

0.680 M * 279 mL + 0.450 M * 462 mL = C_final * 741 mL

0.680 M * 279 mL + 0.450 M * 462 mL = C_final * 0.741 L

Converting volumes to liters:

0.680 M * 0.279 L + 0.450 M * 0.462 L = C_final * 0.741 L

0.680 M * 0.279 L + 0.450 M * 0.462 L = C_final * 0.741 L

0.190982 + 0.209719 = C_final * 0.741 L

0.400701 = C_final * 0.741 L

Dividing both sides by 0.741 L:

0.400701 / 0.741 L = C_final

So, the final concentration of the mixture is 0.54 M NaCl.

Answer:

142 can be expressed in scientific notation as 1.42 x 10².

Explanation:

Answer:

C. Hl

Explanation:

I just looked it up on the internet lol

Answer:

12.0 grams of hydrogen would produce 12.0 grams of water.

Explanation:

The reaction between hydrogen and oxygen to form water can be represented as follows:

2H2(g) + O2(g) -> 2H2O(l)

From the equation, it can be seen that for every 2 grams of hydrogen, 1 gram of oxygen is required to produce 2 grams of water. Therefore, if 12.0 grams of hydrogen reacts with oxygen, 12.0/2 = 6.0 grams of oxygen would be required. This amount of oxygen would produce 2 * 6.0 = 12.0 grams of water.

Answer:

Explanation:

the grams of water produced= 44 grames  

Answer: 1.5 x 10^23 atoms

Explanation:

Answer:

1.505 x 10^23 atoms in 0.25 moles of silicon.

Explanation:

The number of atoms in 0.25 moles of silicon can be calculated as follows:

1 mole of any substance contains Avogadro's number of atoms. Avogadro's number is approximately 6.022 x 10^23 atoms/mole.

So, if we have 0.25 moles of silicon, the number of atoms can be calculated as follows:

0.25 moles x (6.022 x 10^23 atoms/mole) = 1.505 x 10^23 atoms

Therefore, there are approximately 1.505 x 10^23 atoms in 0.25 moles of silicon.

The percent yield of Cl2 in the electrolytic decomposition of HCl is 54.18%.

Electrolytic decomposition is a type of chemical reaction that uses electricity to break down a compound into its component elements or ions. This process involves passing an electric current through an electrolyte, which is a substance that conducts electricity when dissolved in a solvent or melted.

To calculate the percent yield of Cl2 in the electrolytic decomposition of HCl, we need to compare the actual yield of Cl2 obtained in the experiment to the theoretical yield of Cl2 that could be obtained if all the HCl reacted completely.

After balancing,

2 HCl (aq) → Cl2 (g) + H2 (g)

The molar mass of HCl is 36.46 g/mol, so 25.8 g of HCl is equal to 25.8 g / 36.46 g/mol = 0.708 mol of HCl.

According to the balanced equation, 2 moles of HCl should produce 1 mole of Cl2, so the theoretical yield of Cl2 can be calculated as:

Theoretical yield of Cl2 = 0.5 × 0.708 mol = 0.354 mol

The molar mass of Cl2 is 70.90 g/mol, so the theoretical yield of Cl2 in grams is:

Theoretical yield of Cl2 = 0.354 mol × 70.90 g/mol = 25.1 g

The actual yield of Cl2 obtained in the experiment is 13.6 g.

The percent yield of Cl2 can be calculated as:

Percent yield = (Actual yield / Theoretical yield) × 100%

Percent yield = (13.6 g / 25.1 g) × 100%

Percent yield = 54.18%

To know more about Electrolytic decomposition, visit:

https://brainly.com/question/28300598

#SPJ1

Based on the model shown, the model is limited in its depiction of the condensation of gases as it does not show how the temporary fluctuating dipoles of the molecular electron clouds result in a net force of attraction between the molecules.

The correct option is D.

Intermolecular forces are the forces that exist between the molecules of substances such as gases, liquids, and solids. The intermolecular forces in gases are negligible.

Dipole-dipole interactions, London dispersion forces (commonly referred to as van der Waals forces), and hydrogen bonds are the three main types of intermolecular interactions.

Learn more about intermolecular forces in gases at: https://brainly.com/question/20364571

#SPJ1

The empirical formula of a compound can be determined from the results of a combustion analysis. The empirical formula represents the simplest whole-number ratio of atoms in the molecule.

Here's how you can determine the empirical formula of the hydrocarbon based on the given information:

Determine the number of moles of CO2 produced:

moles = mass / molar mass

moles = [tex]22.0 g / (44.0 g/mol) = 0.5 mol[/tex]

Determine the number of moles of carbon in the sample:

moles of carbon = moles of CO2 produced / ratio of C:CO2

moles of carbon = [tex]0.5 mol / 1 : 1 = 0.5 mol[/tex]

Determine the number of moles of hydrogen in the sample:

moles of hydrogen = moles of CO2 produced / ratio of H:CO2

moles of hydrogen = [tex]0.5 mol / 1 : 2 = 0.25 mol[/tex]

Express the number of moles of each element as a whole number ratio:

moles of carbon / smallest number of moles = [tex]0.5 mol / 0.5 mol = 1[/tex]

moles of hydrogen / smallest number of moles =[tex]0.25 mol / 0.25 mol = 1[/tex]

So, the empirical formula of the hydrocarbon is CH, indicating that for every one carbon atom, there is one hydrogen atom in the molecule.

To find the molecular formula, you can use the empirical formula and the molar mass of the compound. The molecular formula is a multiple of the empirical formula and can be determined by dividing the molar mass of the compound by the empirical formula weight:

Empirical formula weight =[tex]12.0 g/mol + 1.0 g/mol = 13.0 g/mol[/tex]

Molecular formula multiple = molar mass / empirical formula weight

Molecular formula multiple = [tex]70 g/mol / 13.0 g/mol = 5.3846[/tex]

The molecular formula multiple is not a whole number, so we round up to the nearest whole number, which is 6. The molecular formula of the hydrocarbon is therefore 6 times the empirical formula, or C6H6.

To learn more about compound refer to this link

https://brainly.com/question/14117795

#SPJ4

If each household emits 60 metric tons of CO2 on average, and 21 metric tons are from transportation, the remaining CO2 emissions from a household would be 60 - 21 = 39 metric tons.

However, it is not possible to determine how many metric tons of CO2 are specifically from the use of buses, as this information is not specified. The 21 metric tons of CO2 emissions from transportation could come from a variety of sources, including buses, cars, trains, and airplanes. Without further information, it is not possible to determine exactly how many of the 21 metric tons of transportation-related CO2 emissions are specifically from the use of buses. To determine this information, you would need data that breaks down the total transportation-related CO2 emissions into smaller categories, such as emissions from individual modes of transportation. So, while it's known that each household emits an average of 60 metric tons of CO2 per year, with 21 of those metric tons being from transportation, it is not possible to determine the exact amount of CO2 emissions from the use of buses without additional information.

To learn more about transportation refer to this link

https://brainly.com/question/28817407

#SPJ4

The decomposition of H2O2 (hydrogen peroxide) can be described by the following reaction:

2H2O2 (aq) → 2H2O (l) + O2 (g)

This reaction follows first-order kinetics, so its rate of reaction is given by the following equation:

Rate = k[H2O2]

Where k is the rate constant and [H2O2] is the molar concentration of H2O2. The half-life of this reaction (the time required for [H2O2] to be reduced to half its initial value) is 1735 seconds.

Given that [H2O2] = 0.25 M, we calculate the rate of reaction as follows:

Rate = k[H2O2] = 1.0 x 10^-4 s^-1 × 0.25M = 2.5 x 10^-5 s^-1

Therefore, the instantaneous rate of H2O2 decomposition, when [H2O2] = 0.25 M, is 2.5 x 10^-5 s^-1.

To learn more about rate of reaction:

https://brainly.com/question/24795637

#SPJ4

1.4108g of copper will be produced.

Define a displacement reaction.

When a less reactive element is pushed out of a compound that also contains a more reactive ingredient, the result is a displacement reaction. The less reactive element is now pure and left alone following a displacement reaction.

When an atom or group of atoms in a molecule are replaced by another atom, this is referred to as a displacement reaction. A + B + C = A + B + C. When A is more reactive than B, the aforementioned equation holds true.

2Al + 3CuCl2 → 3Cu + 2AlCl3.

Number of moles of Al  = 0.4g/27g

                                       = 0.0148moles

2 moles of Al will give 3 moles of Cu.

So, 0,0148moles Al will give 3/2 *0.0148 moles of copper i.e. 0.022moles

Mass of Cu will be 0.022*63.55 i.e. 1.4108g

To learn more about displacement reaction use link below:

https://brainly.com/question/26413416

#SPJ1

A.When strong acid is added,the concentration of hydronium ion immediately increases and after equilibrium ,the concentration of acetic acid will be higher  than before disturbance. Therefore, option A and D are correct.

A chemical that gives off hydrogen ions in water and forms salts by combining with certain metals are called as an acid.

B) The concentration of hydronium ion immediately decreases and after equilibrium ,the concentration of acetic acid will be lower  than before the disturbance.

As when strong base is added ,the hydronium ions from acetic acid reacts with base and therefore, their concentration decreases ,also after equilibrium ,the concentration of acetic acid will be lower than before the disturbance by following Le Chatelier's principle

C)When the temperature is decreased the reaction will move in forward direction as it is an exothermic reaction and so after equilibrium ,the concentration of acetic acid will be lower than before.

D) Sodium acetate is a basic salt and when it is added to the solution,it will dissociate to formed acetate ions and sodium ions and by the common ion effect ,After equilibrium ,the concentration of acetic acid will be higher than before the disturbance.

Thus, When strong acid is added, it has a greater tendency to dissociate, and thus the concentration of hydronium ion increases immediately according to Le Chatelier's principle.

Also, as the concentration of strong acid increases after equilibrium, the concentration of acetic acid increases.

To learn more about an acid, follow the link;

https://brainly.com/question/14072179

#SPJ9

The circumstances listed below would accelerate diffusion within cells: 1. Boost the temperature. b. High concentration gradient e.

The spontaneous movement of particles from a high concentration area to a low concentration area is known as diffusion. In gases, liquids, and solids, it happens spontaneously as a passive transport mechanism. Temperature, concentration gradient, particle size, and the existence of barriers or impediments are some of the variables that affect the rate of diffusion. Several biological activities, such as the flow of gases into and out of cells, the transportation of nutrients and waste products across cell membranes, and the control of ion concentrations in cells, all depend on diffusion. Diffusion theory is fundamental to many disciplines, including chemistry, biology, physics, and engineering.

Learn more about diffusion here:

https://brainly.com/question/30527283

#SPJ4

Answer:

the final volume of the gas inside the cylinder after 0.500 mole has leaked out is 37.0 L.

Explanation:

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Since the pressure and temperature are constant, we can assume that they remain constant during the process of the gas leaking out. So, the initial state (1) and the final state (2) of the gas can be described as follows:

(1) PV1 = n1RT

(2) PV2 = (n1 - 0.500)RT

Now, we can find the final volume of the gas by substituting the known values into the equation and solving for V2:

V2 = (n1RT)/P = (1.90 * 8.31 * T)/P

V2 = (1.90 * 8.31 * T)/P = (1.90 * 8.31 * T)/P = 49.0

V2 = 49.0 L * (1.90 - 0.500) / 1.90

V2 = 37.0 L

The theoretical yield of NO2 would be 22.08 grams.

Mole of 20.0 grams HNO3 = mass/molar mass

                                             = 20/63.01 = 0.32 mol

Mole of 20.0 grams NO = 20/30.01 = 0.67 mol

From the equation of the reaction, the mole ratio of HNO3 and NO is 2:1, thus, HNO3 is the limiting reactant.

The mole ratio of HNO3 and NO2 is 2:3, thus, the equivalent mole of NO2 formed would be:

3/2 x 0.32 = 0.48 mol

Mass of 0.48 mol NO2 = 0.48 x 46 = 22.08 grams

In other words, the theoretical yield of NO2 from the reaction is 22.08 grams.

More on the theoretical yield of reactions can be found here: https://brainly.com/question/14966377

#SPJ1

The temperature of savannah's liquid to the nearest degree Fahrenheit  is 93.1

Temperature conversion formulas are defined as the conversion formulas for changing the value of temperature from one unit to another. They're colorful distinct temperature conversion styles. Kelvin, Celsius, and Fahrenheit are the most generally used scales for temperature dimension.

In science class, Savannah measures the temperature of a liquid to be 34° Celsius. Her teacher wants her to convert the temperature to degrees Fahrenheit.

The general formula to convert Celsius into Fahrenheit is

[tex]F = (C*\frac{9}{5}) +32[/tex]

Substitute C=34°,

[tex]F = (C*\frac{9}{5}) +32\\\\F = (34*\frac{9}{5}) +32\\\\F = (34*\ 1.8}) +32\\\\F = 61.2 +32\\\\F = 93.1[/tex]

Therefore, The temperature of Savannah's liquid to the nearest degree Fahrenheit is 93.1°.

Learn more about Temperature conversion:

https://brainly.com/question/29008920

#SPJ4

1) There are 18 electrons and 20 protons

2) There are 21 neutrons hence the mass number is 41

An ion is created when an atom gains or loses one or more electrons. An atom is composed of a nucleus, which contains positively charged protons and neutral neutrons, and electrons, which orbit the nucleus.

If an atom gains one or more electrons, it becomes negatively charged and is known as an anion. If an atom loses one or more electrons, it becomes positively charged and is known as a cation.

Learn more about ions:https://brainly.com/question/14982375

#SPJ1

Molality of an aqueous solution of 5.0% NaCl will be 0.842 m. Mole fraction of NaCl is 0.014 and mole fraction of water is 0.98.

To calculate molality, we first calculate the mass of NaCl in the solution which is, 100 x 5/100% = 5g.

We then calculate the moles of NaCl in the solution,

5/58.45 = 0.08 (Molar mass of NaCl = 58.45)

Mass of water in the solution = 100g - 5g = 95g x 1/1000 = 0.095

Therefore, molality can now be calculated as,

Molality = 0.08/0.095 = 0.842 m.

To calculate the mole fraction of the solution, we first calculate the moles of water in the solution,

Moles of water = 95/18 = 5.27 mol of water (Since molar mass of water = 18)

Now, mole fraction of NaCl = 0.08/5.27 + 0.08 = 0.014

Mole fraction of water = 5.27/5.27 + 0.08 = 0.098

To learn more about molality visit:

brainly.com/question/14591804

#SPJ1

Yes, all of these energy output objects can work with a turbine. Turbines are designed to convert energy from a source, such as the wind or flowing water, into useful forms of energy, such as electricity or movement.

Energy is an important concept in physics that describes the capacity of a physical system to do work. It is often described as the ability to do work and can be found in many forms, including kinetic energy, potential energy, thermal energy, electrical energy, and chemical energy. Kinetic energy is the energy of motion and is the result of an object's movement. Potential energy is the stored energy of an object due to its position or configuration. Thermal energy is energy contained in the movement of particles and is related to temperature.

This energy can then be used to power a variety of energy output objects, such as water heaters, light bulbs, and fans.

To learn more about energy
https://brainly.com/question/19666326
#SPJ1

Answer:

(C3H8) produces 660 g of CO2 and 360 g of H2O

Explanation:

The balanced chemical equation for the combustion of propane (C3H8) is:

C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)

This equation tells us that for every molecule of propane (C3H8) that reacts with 5 molecules of oxygen (O2), 3 molecules of carbon dioxide (CO2) and 4 molecules of water (H2O) are produced.

So, if we have 220. g of propane (C3H8), we can find the amount of CO2 and H2O produced by using the mole ratio from the balanced equation:

1 mole C3H8 reacts with 5 moles of O2 to produce 3 moles of CO2 and 4 moles of H2O

We can find the number of moles of C3H8 by dividing the mass by the molar mass of C3H8 (44 g/mol):

220 g / 44 g/mol = 5 moles C3H8

So, the number of moles of CO2 and H2O produced can be found by multiplying the number of moles of C3H8 by the mole ratio:

3 moles CO2 = 3 moles CO2/1 mole C3H8 * 5 moles C3H8 = 15 moles CO2

4 moles H2O = 4 moles H2O/1 mole C3H8 * 5 moles C3H8 = 20 moles H2O

Finally, we can convert the number of moles of CO2 and H2O to grams by multiplying by their molar masses (44 g/mol for CO2 and 18 g/mol for H2O):

15 moles CO2 * 44 g/mol = 660 g CO2

20 moles H2O * 18 g/mol = 360 g H2O

So, the combustion of 220 g of propane (C3H8) produces 660 g of CO2 and 360 g of H2O.

Prokaryotes, single-celled microorganisms without nuclei, include both bacteria and archaea.

Describe prokaryotes.

Prokaryotes are creatures without a nucleus or other organelles in their cells. Bacteria and archaea, two separate groupings of prokaryotes with allegedly independent evolutionary histories, are separated into. The majority of prokaryotes are tiny, single-celled creatures with a straightforward structure.

Both of them are microscopic, single-celled organisms with a wide range of forms. Bacteria and archaea both contain only one circular chromosome and no membrane-bound organelles. Archaea can contain flagella to help with movement, just like bacteria may.

Although there are many different shapes that bacteria and archaea can take, cocci, bacilli, and spirilli are the three that are most frequently found. In comparison to ordinary eukaryotes, bacteria and archaea are both typically tiny organisms.

To know more about Bacteria use link below:
https://brainly.com/question/8695285

#SPJ1

Answer:

divide it by

its molar mass

Explanation:

The student needs to weigh out 18.055 g of chromium(II) nitrate.

What is mass?

Mass is a measure of the amount of matter in an object, typically measured in units of kilograms (kg), grams (g), or milligrams (mg). It is a scalar quantity, meaning it has magnitude but no direction.

(a) To prepare a 0.235 M solution of chromium(II) nitrate in 500 mL of water, we need to calculate the amount of chromium(II) nitrate that needs to be weighed out.

The formula weight of chromium(II) nitrate is Cr(NO3)2. Using the periodic table, we can find the atomic weights of the elements in this compound:

Cr: 52

N: 14

O: 16

So, the formula weight of chromium(II) nitrate is:

52 + 2(14 + 3(16)) = 154 g/mol

To prepare a 0.235 M solution, we need 0.235 moles of chromium(II) nitrate in 1 liter (1000 mL) of solution. In 500 mL of solution, we need:

0.235 moles/L x 0.5 L = 0.1175 moles

The mass of chromium(II) nitrate that contains 0.1175 moles can be calculated using the formula:

mass = moles x formula weight

mass = 0.1175 mol x 154 g/mol = 18.055 g

Therefore, the student needs to weigh out 18.055 g of chromium(II) nitrate.

(b) Option C, "Add a small amount of water to the volumetric flask and swirl until the salt sample has dissolved," would not be an expected step in the procedure used by the student. When preparing a solution in a volumetric flask, it is important to first add a portion of the solvent (in this case, water) to the flask, and then add the solute (chromium(II) nitrate) and mix it thoroughly to dissolve it. This is to ensure that the final volume of the solution is accurate, since the volumetric flask is calibrated to contain a specific volume of liquid only when filled to the mark after adding the solute.

To learn more about mass:

https://brainly.com/question/1838164

#SPJ1