Answer:
Explanation:
1)Melting:
Melting is the process by which a substance changes from the solid phase to the liquid phase. ... Melting occurs when the internal energy of a solid increases, usually through the application of heat or pressure, such that the molecules become less ordered.
2) liquefication:
In physics and chemistry, the phase transitions from solid and gas to liquid (melting and condensation, respectively) may be referred to as liquefaction. The melting point (sometimes called liquefaction point) is the temperature and pressure at which a solid becomes a liquid.
3) vaporization:
Vaporization, conversion of a substance from the liquid or solid phase into the gaseous (vapour) phase. If conditions allow the formation of vapour bubbles within a liquid, the vaporization process is called boiling. Direct conversion from solid to vapour is called sublimation.
4) Sublimation occurs as molecules of a substance in the solid state go to the vapor state directly, rather than through the liquid state. ... ⭕In terms of the kinetic molecular theory, we know that molecules are in constant random motion, even when the substance is below the melting point.
. What is a normal force? It acts against an object slowing it down. It acts perpendicular to an object. It acts with an object adding to its speed. It acts parallel to an object.
Answer:
Explanation:
This is basically asking you what the definition of Normal force is. Normal force is the force that pushes back against the weight of something that is sitting (or standing or lying) perpendicular to it. That's why, when you stand on a floor you don't crash through the floor OR go shooting up into space. The Normal force is equal but opposite to your weight. The floor exerts the normal force (pushing up and is positive) while your weight is opposing it (pushing down and is negative.) Perpendicular is the key word here, I believe.
A normal force acts perpendicular to an object. It is the force exerted by a surface to support the weight of an object resting on it.
The normal force acting against an object slowing it down or acting with an object adding to its speed, are not accurate descriptions of the normal force. The normal force primarily deals with the support of an object on a surface and is directed perpendicular to that surface.
Normal force is the force that pushes back against the weight of something that is sitting (or standing or lying) perpendicular to it. That's why, when you stand on a floor you don't crash through the floor OR go shooting up into space. The Normal force is equal but opposite to your weight. The floor exerts the normal force (pushing up and is positive) while your weight is opposing it (pushing down and is negative.)
Therefore, A normal force acts perpendicular to an object. It is the force exerted by a surface to support the weight of an object resting on it.
To know more about the normal force:
https://brainly.com/question/13622356
#SPJ3
18.How much momentum will a dump-bell of mass 10 kg transfer to the floor if it falls from a height.of 80 cm ? Take its downward acceleration to be 10 m s-2
Such asSuch ToSuch aSuch as طHow do I send the answer to the question?OkI don't know how to use this program
Answer:
MOMENTUM = 40kg ms-¹
hope it helps
have a nice day
explain what characterises a sound as noise or music
Explanation:
Noise is sound with a continuous structure. Music is composed of sounds with a fundamental frequency and overtones. Noise is composed of sounds with frequencies that range continuously in value from as low as you can hear to as high as you can hear — not necessarily at equal intensity, however.
What information does the period number give about an atom?
Answer:All of the elements in a period have the same number of atomic orbitals. For example, every element in the top row (the first period) has one orbital for its electrons. All of the elements in the second row (the second period) have two orbitals for their electrons.Explanation:
Answer:
It tells us the principle quantum shell in which the element lies in. In other words, it shows the total number of electron shells the atom has
If a car drives 10 mph South, this is an example of a:
A. Displacement
B. Velocity
C. Distance
D. Speed
If a car drives 10 mph South, this is an example of a:
If a car drives 10 mph South, this is an example of a: Displacement
[DISPLACEMENT IS THE SHORT DISTANCE TRAVELLED BY A BODY AT A CERTAIN DIRECTION]
A velocity would be an automobile traveling south at 10 mph. Option B is correct.
What is velocity?The change of displacement with respect to time is defined as velocity. velocity is a vector quantity. It is a time-based component. Its unit is m/sec.
If the direction is given quantity is a vector quantity. In the given data the direction is given, that's why a car drives 10 mph South, this is an example of a velocity.
Hence, option B is correct.
To learn more about the velocity, refer to the link: https://brainly.com/question/862972
#SPJ2
A cylindrical container closed of both end has a radius of 7cm and height of 6cm A.)find the total surface area of the container B.) find the volume of the container
A 72 kg swimmer dives horizontally off a raft floating in a lake. The diver's speed immediately after leaving the raft is 3.8 m/s. If the time interval of the interaction between the diver and the raft is 0.25 s, what is the magnitude of the average horizontal force by diver on the raft?
Answer:
F = 1094.4 N
Explanation:
From impulse - momentum theorem, we now that ;
Impulse = momentum
Where;
Formula for impulse = force (F) × time(t)
Momentum = mass(m) × velocity(v)
Now, we are given;
Mass of swimmer; m = 72 kg
Speed; v = 3.8 m/s
Time; t = 0.25 s
Thus;
F × t = mv
F = mv/t
F = (72 × 3.8)/0.25
F = 1094.4 N
This value of force is the magnitude of the average horizontal force by diver on the raft.
What will happen to the gravitational force when the distance between the centre of the two bodies is halved ?
Explanation:
when the distance between the 2 objects is halved, the gravitational force between the 2 objects is doubled. when the distance between the 2 objects is doubled then the gravitational force doubles.
(Serious Please) patulong
Answer:
a. Potential energy is highest at Part A
The kinetic energy is highest at Part C and Part D
b. The potential energy is lowest at Part C and Part D
c. The roller coater has equal amount of potential and kinetic energy at Part B, Part D and part F
2) Yes, the mechanical energy is the same from point A to F according to the first law of thermodynamics
Explanation:
The total mechanical energy is constant where the roller coaster moves by only the initial velocity, and the the force of gravity
Total mechanical energy, M.E. = Kinetic energy, K.E. + Potential energy, P.E.
M.E. = K.E. + P.E. = Constant
Therefore, we have;
a. Potential energy is the energy stored in a body, due to its position or elevation, state or arrangement
The higher the elevation, the higher the potential energy, therefore, the highest amount of potential energy is gained when the roller coaster is at the highest point in the motion = Part A
From M.E. = K.E. + P.E. = Constant, the highest kinetic energy is given at the point the roller coaster has the lowest potential energy, which corresponds with the lowest points = Part C and Part D
b. Potential energy, which is the energy of body due to its position or state is lowest at the lowest points = Part C and Part D
c. The value of potential energy, P.E. due to elevation, can be found as follows
P.E. = Mas, m × Gravity, g × Height, h
Therefore, the potential energy will be half the maximum value where the height, h = (Maximum height)/2 and given that M.E. = K.E. + P.E., the kinetic energy, will increase by the same amount, and we have;
K.E. = P.E. at the half the maximum height of the track = Part B, Part D and part F
2) The mechanical energy is the input energy, which according to the first law of thermodynamics cannot be created and destroyed an it is therefore, constant and it is the same from point A to F
4. An object is thrown from from the ground upward with an initial speed of 3.75 m/s. How long will the object be in the air before it lands on the ground?
Answer:
Explanation:
There's an easy way to answer this and then an easier way. I'll do both since I'm not sure what you're doing this for: physics or calculus. Calculus is the easier way, btw.
Going with the physics version first, here's what we know:
a = -9.8 m/s/s
v₀ = 3.75 m/s
t = ??
That's not a whole lot...at least not enough to directly solve the problem. What we have to remember here is that at the max height of a parabolic path, the final velocity is 0. So we can add that to our info:
v = 0 m/s. Use the one-dimensional equation that utilizes all that info and allows us to solve for time:
v = v₀ +at and filling in:
0 = 3.75 + (-9.8)t and
-3.75 = -9.8t so
t = .38 seconds. This is how long it takes to get to its max height. Another thing we need to remember (which is why calculus is so much easier!) is that at the halfway point of a parabolic path (the max height), the object has traveled half the time it takes to make the whole trip. In other words, if .38 is how long it takes to go halfway, then 2(.38) is how long the whole trip takes:
2(.38) = .76 seconds. Now onto the calculus way:
The position function is
[tex]s(t)=-4.9t^2+3.75t[/tex] The first derivative of this is the velocity function and, knowing that when the velocity is 0, the time is halfway gone, we will find the velocity function and then set it equal to 0 and solve for t:
v(t) = -9.8t + 3.75 and
0 = -9.8t + 3.75 and
-3.75 = -9.8t so
t = ,38 and multiply that by 2 to find the time the whole trip took:
2(.38) = .76 seconds.
You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration
Answer:
the acceleration of the elevator is increasing
Explanation:
For this exercise we propose the solution using Newton's second law
F -W = m a
F = m (g + a)
If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.
What is the relationship between Avogadro's number and a mole?
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
B. A mole is a smaller amount than Avogadro's number.
C. Avogadro's number is used to count particles, and a mole is used
to measure mass.
D. A mole applies to any item, but Avogadro's number is limited to
atoms.
SUBM
Answer:
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
Explanation:
The mole of a substance is
Is it possible to get a body accelerated even if it is moving with uniform speed? justify.
Answer:Yes, A body can have constant speed but still accelerate as in case of uniform circular motion. In uniform circular motion speed remains constant and direction of velocity changes with every point in the direction of tangent drawn from that point.
Explaination:
Was this helpful
Are mass and weight the same thing?
Yes
No
Answer:
Explanation:
Definitely NOT! Mass is unchanging, wherever you go. On the moon you will have the same mass as you will on the earth. Mass is just a measure of the matter that makes up a body. Weight, however, is dependent upon the pull of gravity which is different on earth than it is on the the moon, for example.
Mass doesn't change with proximity whereas weight can.
Answer: No
Explanation: The terms'mass' and 'weight' are frequently used interchangeably, yet they have distinct meanings. Your mass remains constant regardless of where you are in the universe; nevertheless, your weight varies. The mass of anything is a measure of how much power is required to change its course.
what is energy
and how it works?
Answer:
Energy is defined as the ability to do work.
Explanation:
Energy is a property that must be transferred to a body to perform work on the body. Energy can be found in many things and can take different forms.Energy is never lost, but it can be converted from one form to another.Fossil fuels are the largest sources of energy for energy generation.Which of the following is an example of a surface wave?
A. Compression wave
B. Sound wave
C. Electromagnetic wave
D. Ocean wave
Answer:
ocean wave
hope it helped you
What is the dependent variable in this
experiment?
DONE
Biologists designed an experiment to test
the effect of compost on the development
of root crops. They tested several different
crops, including carrots, potatoes, beets,
and onions. They grew most of the plants
in the greenhouse, but due to space issues,
they had to grow some outdoors. They gave
all the plants the same amount of compost.
They obtained the compost from a local
farmer and from the local hardware store.
They ran out of the farmer's compost, so
some of the plants received that compost
when the seeds were planted and other
plants got hardware store compost after
the plants had already started growing.
What is the independent variable in this
experiment?
DONE
Answer:
"the plants had already started growing."
Explanation:
I think this is the answer because the definition of a dependent variable is the variable that is being affected by the change. Since the plants had already started growing BECAUSE of "They ran out of the farmer's compost, so
some of the plants received that compost
when the seeds were planted and other
plants got hardware store compost after
the plants had already started growing."
Sorry if I am wrong, I am just a 4th grader, pls don't hate on me, I am just trying to help :)
Answer:
It's compost
Explanation:
In case you needed the dependent variable, its the amount of plant growth
A dog wishes to swim across a slow moving stream. The current velocity is 3.0m/s. The distance directly across the stream is 50m. If the dog point himself directly across the stream, it will take .....
Answer:
Time = 16.667 seconds
Explanation:
Given the following data;
Distance = 50 meters
Velocity = 3 m/s
To find the time it will take;
Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.
Mathematically, velocity is given by the equation;
Velocity = distance/time
Making time the subject of formula, we have;
Time = distance/velocity
Time = 50/3
Time = 16.667 seconds
For taking bath, water at 40⁰C is required. Calculate the mass of cold water at 15⁰C which is to be added in 60 Kg water at 100⁰C for bathing purpose. 1 point a) 51Kg b) 47Kg c) 44 Kg d) 39Kg
how does a resistor affect an electrical circuit
Answer:
A resistor has the ability to reduce voltage and current when used in a circuit. The main function of a resistor is to limit current flow.
Explanation:
I this what you were looking for?
what is the closest to the order of magnitude of the energy rquired to split a nucleus in to its individual protons and neutrons
Answer:
More than two million electron volts.
Explanation:
More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.
As compared with lower kVp exposures, when using high kVp will result in a scattered photon that is of ________ energy. Group of answer choices
Answer:
Increased
Explanation:
kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy
Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.
why is fundamental unit called derived unit ?
Since fundamental units are elementary in nature and cannot be reduced further, so it can not be reduced further, so it cannot be expressed in other units
What is the acceleration of a motorcycle that starts from rest and reaches a velocity of 24 m/s in 8.5 seconds?
Answer:
2.82 m/s²
Explanation:
[tex]v = u + at \\ 24 = 0 + a(8.5) \\ a = 2.82 \: ms {}^{ - 2} [/tex]
The acceleration of a motorcycle is 2.82 m/s^2.
What is acceleration?Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.
Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration for all other motions.
Given that:
Initial velocity of the motor cycle: u = 0 m/s.
Final velocity of the motorcycle = 24 meter/second.
Time taken to reach this velocity = 8.5 second.
Hence, acceleration of the motor cycle = change in velocity/time interval
= ( final velocity - initial velocity)/time interval
= ( 24 m/s - 0 m/s)/8.5 s
= 2.82 m/s^2.
Its acceleration is 2.82 m/s^2.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2
Atoms can create fields to interact with each other without touching.
True
or
False
Answer:
True
Explanation:
True, atoms create electromagnetic fields that form repulsion to keep them from touching.
A water wave passes by a floating leaf that is made to oscillate up and down two complete cycles each second, which means that the wave's frequency is
Answer:
2 Hz.
Explanation:
Frequency is simply defined as the number of appearances of a periodic event occurring per time. It is usually measured in cycles/second.
Now, in this question, we are told that there are 2 cycles for each second.
Thus, we can say that the frequency is 2 cycles/1 s = 2 Hz.
In 'coin on card' experiment a smooth card is used.
Answer:
In coin card experiment smooth card is used so that the card can slide easily from glass
Tarnishing of iron is similar to which of the following changes?
O Folding a paper
O Shredding a paper
Burning a paper
Dropping a paper
Answer:
Burning paper
Explanation:
The tarnishing of iron is a chemical process, and the only option that is a chemical process is Burning paper
Se lanza una pelota de béisbol desde la azotea de un edificio de 25 m de altura con velocidad inicial de magnitud 10 m/s y dirigida con un ángulo de 63.1° sobre la horizontal. A) ¿Qué rapidez tiene la pelota justo antes de tocar el suelo? Use métodos de energía y desprecie la resistencia del aire.
Answer:
v_f = 24.3 m / s
Explanation:
A) In this exercise there is no friction so energy is conserved.
Starting point. On the roof of the building
Em₀ = K + U = ½ m v₀² + m g y₀
Final point. On the floor
Em_f = K = ½ m v_f²
Emo = Em_g
½ m v₀² + m g y₀ = ½ m v_f²
v_f² = v₀² + 2 g y₀
let's calculate
v_f = √(10² + 2 9.8 25)
v_f = 24.3 m / s
A uniform meter rule of mass 10g is balanced on a knife edge placed at 45cm mark. Calculate the distance of a mass 25g from the pivot
Answer:
2 cm.
Explanation:
Please see attached photo for diagram.
In the attached photo, y is the distance from the pivot to which the 25 g is placed.
The value of y can be obtained as follow:
Clockwise moment = 5 × 10
Anticlock wise moment = y × 25
Anticlock wise moment = Clockwise moment
y × 25 = 5 × 10
y × 25 = 50
Divide both side by 25
y = 50/25
y = 2 cm
Thus, the distance is 2 cm
