Given the following information, compute the current and quick ratios:
Cash $ 100,000
Accounts receivable 392,000
Inventory 470,000
Current liabilities 499,000
Long-term debt 583,000
Equity 589,000
Round your answers to two decimal places.
Current ratio: :1
Quick ratio: :1

Answers

Answer 1

The current ratio of the company is 1:1 and the quick ratio is also 1:1.

This indicates that the company has enough current assets to cover its current liabilities, and can meet its short-term obligations without relying on inventory.

The current ratio is calculated by dividing current assets by current liabilities. In this case, the current assets ($962,000) are equal to the current liabilities ($499,000), resulting in a current ratio of 1:1. The quick ratio, also known as the acid-test ratio, is calculated by dividing current assets minus inventory by current liabilities. In this case, the current assets minus inventory ($492,000) are also equal to the current liabilities ($499,000), resulting in a quick ratio of 1:1.

Overall, the company seems to have a healthy liquidity position, as it has enough current assets to cover its short-term obligations. However, it is important to note that these ratios only provide a snapshot view of the company's financial health at a specific point in time, and additional analysis would be required to fully assess the company's financial position.

To learn more about current ratio click brainly.com/question/28214599

#SPJ11


Related Questions

Consider an amount of $11500 which is to be invested at a given interest rate, compounded annually for 5 years. i) What is the value of the investment at maturity if the annual interest rate is 5.5% ? ii) What annual interest rate is necessary to ensure that the investment of $11 500 reaches $16000 after 5 years?

Answers

I) For an initial investment of $11,500, compounded annually for 5 years, with an annual interest rate of 5.5%, the value at maturity would be approximately $14,724.45. II) To reach a final amount of $16,000 after 5 years, the investment would require an annual interest rate of approximately 9.13%.

i) To calculate the value of the investment at maturity, we can use the formula for compound interest:

A = P(1 + r/n)[tex]^{(nt)}[/tex]

Where:

A = the final amount

P = the principal amount (initial investment)

r = the annual interest rate (in decimal form)

n = the number of times interest is compounded per year

t = the number of years

In this case, the principal amount (P) is $11,500, the annual interest rate (r) is 5.5% (or 0.055 as a decimal), the number of times interest is compounded per year (n) is 1 (since it is compounded annually), and the number of years (t) is 5.

Using the formula, we can calculate the value at maturity:

A = 11500(1 + 0.055/1)[tex]^{(1*5)}[/tex]

A = 11500(1 + 0.055)⁵

A = $14,724.45

Therefore, the value of the investment at maturity, after 5 years with an annual interest rate of 5.5%, would be approximately $14,724.45.

ii) To calculate the required annual interest rate to reach a final amount of $16,000, we can rearrange the compound interest formula to solve for the interest rate (r):

r = (A/P)[tex]^{(1/(n*t))}[/tex] - 1

Using the given values, we have the principal amount (P) as $11,500, the final amount (A) as $16,000, the number of times interest is compounded per year (n) as 1, and the number of years (t) as 5.

Plugging these values into the formula, we can solve for the interest rate (r):

r = (16000/11500)[tex]^{(1/(1*5))}[/tex] - 1

r = (1.3913)[tex]^{(1/5)}[/tex] - 1

r = 0.0913

Therefore, an annual interest rate of approximately 9.13% would be necessary to ensure that the investment of $11,500 reaches $16,000 after 5 years.

To know more about initial investment click here

brainly.com/question/31635721

#SPJ11

Now it's time for you to practice what you've learned. Suppose that Janet is 45 years old and has no retirement savings. She wants to begin saving for retirement, with the first payment coming one year from now. She can save $5,000 per year and will invest that amount in the stock market, where it is expected to yield an average annual return of 4.00% return. Assume that this rate will be constant for the rest of her's life./ Janet would like to calculate how much money she will have at age 50. Using a financial calculator yields a future value of this ordinary annuity to be approximately at age 60 Janet would now like to calculate how much money she will have at age 65. Using a financial calculator yields a future value of this ordinary annuity to be approximately at age 65. Janet expects to live for another 30 years if she retires at age 60, with the same expected percent return on investments in the stock market. Using a financial calculator, you can calculate that Janet can withdraw s at the end of each year after retirement (assuming retirement at age 60), assuming a fixed withdrawal each year and 50 remaining at the end of her life. Janet expects to live for another 25 years if she retires at age 65, with the same expected percent return on investments in the stock market. at the end of each year after retirement at age 65, assuming Using a financial calculator, you can calculate that Janet can withdraw a fixed withdrawal each year and $0 remaining at the end of her life.

Answers

Janet is 45 years old and has no retirement savings. She wants to begin saving for retirement, with the first payment coming one year from now. She can save $5,000 per year and will invest that amount in the stock market, where it is expected to yield an average annual return of 4.00% return.

Assume that this rate will be constant for the rest of her life.In order to calculate the amount of money Janet would have at age 50, we can use the formula of the future value of annuity which isFV = PMT * [(1 + r)n - 1]/rHere,PMT = $5,000r = 4% = 0.04n = 5 yearsAfter putting these values into the formula, we getFV = $5,000 * [(1 + 0.04)5 - 1]/0.04= $26,532.27Thus, Janet would have approximately $26,532.27 at the age of 50.Now, Janet wants to calculate the amount of money she will have at age 65. Using a financial calculator yields a future value of this ordinary annuity to be approximately at age 65.Janet expects to live for another 30 years if she retires at age 60, with the same expected percent return on investments in the stock market. Using a financial calculator, you can calculate that Janet can withdraw s at the end of each year after retirement (assuming retirement at age 60), assuming a fixed withdrawal each year and 50 remaining at the end of her life.In order to calculate the amount that Janet can withdraw after her retirement (at age 60) and at the end of each year, we can use the formula of the present value of annuity which isPV = PMT * [1 - (1 + r)-n]/r + FV/(1 + r)nHere,PMT = $5,000r = 4% = 0.04n = 30 yearsFV = $50 (since she wants to keep $50 remaining at the end of her life)After putting these values into the formula, we getPV = $5,000 * [1 - (1 + 0.04)-30]/0.04 + $50/(1 + 0.04)30= $57,767.10Thus, Janet can withdraw approximately $57,767.10 at the end of each year after retirement (assuming retirement at age 60) and at the end of 30 years, $50 will be remaining.

On the other hand, if Janet expects to live for another 25 years if she retires at age 65, with the same expected percent return on investments in the stock market, the amount she can withdraw at the end of each year after retirement at age 65, assuming a fixed withdrawal each year and $0 remaining at the end of her life can be calculated using the formula of the present value of annuity which isPV = PMT * [1 - (1 + r)-n]/rHere,PMT = $5,000r = 4% = 0.04n = 25 yearsAfter putting these values into the formula, we getPV = $5,000 * [1 - (1 + 0.04)-25]/0.04= $88,183.31Thus, Janet can withdraw approximately $88,183.31 at the end of each year after retirement (assuming retirement at age 65) and $0 will be remaining at the end of 25 years.

To know more about payment visit:

https://brainly.com/question/32320091

#SPJ11

Starting from an equilibrium position when the economy is near full employment, discuss the immediate economic consequences that result because of the floods in eastern Australia. Use a static AD/AS model to illustrate your discussion.

Answers

When floods occur in eastern Australia, they can have immediate economic consequences that disrupt the equilibrium position of the economy. Using a static AD/AS model, we can analyze the short-term effects. Here's a discussion of the immediate economic consequences:

Supply Shock: The floods in eastern Australia can lead to a negative supply shock. The flood damage can disrupt agricultural production, damage infrastructure, and affect transportation networks. As a result, the aggregate supply (AS) curve shifts to the left, indicating a decrease in the overall level of output in the economy.

Decrease in Aggregate Output: With the decrease in aggregate supply, the economy operates at a lower level of output. This is represented by a leftward shift in the aggregate demand (AD) curve intersecting the new AS curve at a lower level of output and a higher price level.

Price Level Increase: Due to the supply shock, the decrease in output leads to upward pressure on prices. The reduced availability of goods and services increases their scarcity, causing prices to rise. As a result, the price level increases.

Unemployment and Inflation: The decrease in output can lead to higher unemployment rates as firms reduce production and may need to lay off workers. The increase in prices further exacerbates the situation by reducing the purchasing power of individuals and households, leading to a decrease in real wages and potentially contributing to inflationary pressures.

Overall, the floods in eastern Australia disrupt the equilibrium position of the economy, leading to a decrease in output, an increase in the price level, potential unemployment, and inflationary pressures. The immediate economic consequences highlight the negative impact of natural disasters on an economy's productive capacity and overall stability.

To know more about floods click this link -

brainly.com/question/29417169

#SPJ11

1. What emblematic functions can a bicycle serve? Be specific. 2. How can a bicycle be part of a social status transition? 3. Do scraper bikes derive their product meaning from the culture or the individual? Explain your answer. 4. What sacred meaning(s) might a bicycle hold for a consumer? What are the implications for marketers?

Answers

Bicycles serve as transportation, promote exercise, offer leisure and recreation opportunities, and represent environmental sustainability and it has emblematic functions.

They can be part of a social status transition by symbolizing economic progress, a commitment to a healthy lifestyle, and environmental consciousness. Scraper bikes derive their product meaning from both culture and individual customization. Culture establishes the style and values, while individuals add personal creativity and self-expression. Bicycles can hold sacred meanings for consumers, such as environmental stewardship, freedom, and personal growth. Marketers can leverage these meanings by aligning with sustainability, emphasizing freedom and empowerment, and promoting transformative experiences, to establish emotional connections and foster brand loyalty.

Learn more about emblematic functions here : brainly.com/question/774715
#SPJ11

On February 3, a company provides services on account for $34,500, terms 3/10, n/30. On February 9, the company receives payment from the customer for those services on February 3. Required: 1. Determine the financial statement effects when the company provides services on account on February 3. 2. Determine the financial statement effects when the company collects cash from the customer on February 9.

Answers

Determine the financial statement effects when the company provides services on account on February 3When a company provides services on account for $34,500, terms 3/10, n/30, there are a number of financial statement effects that are observed.

These financial statements are as follows: Revenues: $34,500Accounts receivable: $34,500Explanation:Revenues represent the money received by a company in exchange for goods or services that have been sold. In this case, the company received $34,500 from the customer for the services provided. Accounts receivable are the money owed to a company by its customers for services or goods provided. When the company provides services on account, the customer has a set time frame in which to pay for those services. This is what accounts receivable represents.2.

Determine the financial statement effects when the company collects cash from the customer on February 9When the company collects cash from the customer on February 9, there are a number of financial statement effects that are observed. These financial statements are as follows:Cash: $33,465 ($34,500 - $1,035)Accounts receivable: $0Explanation:Cash represents the money that a company has in hand. In this case, the company received $33,465 in cash from the customer for the services provided.Accounts receivable represents the money owed to a company by its customers for services or goods provided. In this case, once the customer paid the company on February 9, there is no longer an amount owed, so accounts receivable will be reduced to zero. $34,500Accounts receivable: $34,5002. Cash: $33,465Accounts receivable: $0

To know more about financial statement visit :

https://brainly.com/question/30355441

#SPJ11

The information here is the same for answering questions 30 to 31. On a given Hong Kong-Singapore flight, there are 300 seats. Suppose the ticket price is 400 Singapore dollars (SGD) and the number of passengers who reserve a seat but do not show up for departure is normally distributed with mean 40 and standard deviation 24. You decide to overbook the flight and estimate that the net cost of an involuntary boarding denial (if the number of passengers exceeds the number of seats) is SGD900 (everything considered). The optimal number of reservations that you should accept (rounded to the nearest integer) is: 340 334 352 328 346 Given the optimal number of reservations, what is the probability that you won't need to deal with bumped passengers? (Choose the closest number if needed.) 43% 57% 80% 69% 67%

Answers

The number of seats in a Hong Kong-Singapore flight is 300, while the price of a ticket is 400 Singapore dollars (SGD).

The number of passengers who reserve a seat but do not show up for departure is normally distributed with a mean of 40 and a standard deviation of 24. SGD 900 is the estimated net cost of an involuntary boarding denial if the number of passengers exceeds the number of seats. To begin with, calculate the expected number of passengers who will not show up.40/300=0.133 (probability that one person will not show up)0.133*300=40 (expected number of passengers who will not show up)Thus, the expected number of passengers who will show up is:300-40=260.Now, we need to determine how many seats to overbook. To get this, we can use the expected number of passengers who will not show up, which is 40, and add this to the number of seats to get the optimal number of reservations that we should accept.260+40=300, which means that 300 reservations should be accepted. So, the answer is rounded to the nearest integer, 300.What is the probability that you won't need to deal with bumped passengers?To determine the probability that we won't have to deal with bumped passengers, we need to find the probability that the number of passengers who show up is less than or equal to 300. To get the probability, we need to standardize the distribution.Standardizing the distribution:z= (X - μ) / σWhere:X = 300μ = 260σ = 24We need to find P(Z ≤ (300 - 260) / 24)P(Z ≤ 1.67)Using a standard normal table or calculator, the probability is approximately 0.9525.Therefore, the probability that we won't have to deal with bumped passengers is approximately 95.25% or 95%.Answer: 95%

To know more about Singapore visit :-

https://brainly.com/question/1325765

#SPJ11

Creating an Accountant's Copy of your data allows your accountant to - Select one: a. check your journal transactions and correct your posted entries b. create adjusting journal entries that you can add to your data file c. start a new fiscal period for your company records d. all of the above

Answers

Creating an Accountant's Copy of your data allows your accountant to have both a main answer and a detailed answer. The answer is "d. all of the above".

What is an accountant's copy?

An Accountant's Copy (AC) of your QuickBooks desktop company file can be created by you and sent to your accountant or bookkeeper. They can then add entries or make modifications to the transactions for the time period that has been given to them, usually the previous fiscal year. These entries can be submitted to the main copy of the company file once they have been made.

However, the software will not allow you to make modifications to a closed fiscal period, and you must make sure that the Accountant's Copy is only used for this reason. The AD file will be kept open until the accountant or bookkeeper has completed their changes and you have imported them into your company file for the fiscal year.

Why is creating an Accountant's Copy important?

The Accountant's Copy of QuickBooks is a fantastic feature that saves business owners both time and money. It allows you to concentrate on your job, while your accountant or bookkeeper focuses on making improvements or adjusting entries in order to ensure that your books are accurate.

An Accountant's Copy (AC) is a QuickBooks data file that can be sent to your accountant. When creating an AC, the software creates a copy of your data up to a particular point in time, and then begins to lock the transactions for the following year. Your company data is still available for use during this time, allowing you to make any necessary modifications.

Learn more about QuickBooks desktop: https://brainly.com/question/31416898

#SPJ11

Imagine you are the CEO of a small software company. You are considering launching a new type of software that differs widely compared to the products you typically sell. This is quite a complex decision, so you assemble a team of your best engineers to decide if and how this should be done. In the end, your engineers recommend that the new software be released, and you follow this recommendation. However, the new software fails miserably in the market. Explain two reasons why the team you constructed may have arrived at this sub-optimal decision. Then, provide two ideas for how you might design the team differently in the future to improve decision making.

Answers

In this scenario, the team of the software company made a sub-optimal decision when they recommended the new software to be released and it later failed miserably in the market.

There are several reasons why the team may have arrived at this decision:

1. Confirmation bias: One possible reason why the team may have arrived at a sub-optimal decision is confirmation bias. This is a type of cognitive bias that occurs when people tend to look for and interpret information in a way that confirms their pre-existing beliefs or ideas. The team may have already had a bias towards launching the new software, and they may have only looked for information that confirmed their existing beliefs. As a result, they may have ignored other information that contradicted their beliefs.

2. Groupthink: Another possible reason why the team may have arrived at a sub-optimal decision is groupthink. Groupthink is a phenomenon that occurs when people in a group prioritize conformity and harmony over critical thinking and decision-making. The team may have been under pressure to conform and agree with each other, leading to a decision that was not based on individual analysis or critical thinking.

To improve decision-making in the future, the team could be designed differently in the following ways:

1. Constructive dissent: The CEO could encourage constructive dissent by inviting members of the team to critique and question each other's ideas. This can encourage diverse perspectives and critical thinking, reducing the likelihood of confirmation bias and groupthink.

2.  Individual analysis: The team members could be encouraged to analyze the problem individually before they come together to discuss it. This way, they will be able to bring in different perspectives and ideas that can be evaluated independently before they come together as a group and develop a consensus. This will help in reducing the possibility of groupthink.

To know more about the Software Company visit:

https://brainly.com/question/22845470

#SPJ11

What is the difference between and ideal standard and a normal standard? Which should be used and why?

Answers

An ideal standard represents the best achievable performance under perfect conditions, while a normal standard represents a realistic level of performance under normal operating conditions. The ideal standard is used as a benchmark for optimal performance, while the normal standard is used to set achievable targets.

The choice between using an ideal standard or a normal standard depends on the purpose and context. Ideal standards can be used for long-term goals and performance evaluation, encouraging continuous improvement.

Normal standards are more practical for day-to-day operations, providing realistic targets and allowing for variations in operating conditions. It is important to strike a balance between the two to motivate employees while maintaining attainable goals and considering the limitations of resources and external factors.

Learn more about performance here:

brainly.com/question/15406295

#SPJ4

The _____ culture is one in which the leadership prioritizes
taking care of their employees.
Guided-missile
Eiffel Tower
Family
Incubator

Answers

The Family culture is one in which the leadership prioritizes taking care of their employees, fostering a sense of belonging and support within the organization.

The Family culture within an organization emphasizes a strong sense of unity, care, and support among its members. In this type of culture, the leadership prioritizes the well-being of their employees and strives to create a familial atmosphere within the workplace.

In a Family culture, leaders often act as mentors and guides, nurturing their employees' personal and professional growth. They encourage open communication, collaboration, and teamwork, creating an environment where individuals feel valued and supported. This culture fosters a sense of belonging and loyalty, as employees feel a strong connection and commitment to the organization and its goals.

Leaders in a Family culture take an active interest in the lives and well-being of their employees. They provide support systems,

Learn more about Leaders here:

https://brainly.com/question/15868646

#SPJ11

You decide to raise $2 million in additional funding via a rights offering. Every shareholder will receive one right for every share of stock they own. The offering consists of a total of 250,000 new shares. The current market price of your stock is $10. Currently, there are 1 million shares outstanding. What is the value of one right? A) $.25 B) $.75 C) $.40 D) $1.20 E) $1.50

Answers

The value of one right is $0.40 (Option C).

To determine the value of one right, we divide the total additional funding ($2 million) by the number of new shares (250,000), resulting in $8 as the subscription price for each new share. Now, we calculate the theoretical ex-right price by subtracting the subscription price from the current market price ($10 - $8 = $2).

Finally, we divide the ex-right price by the number of rights received per share (1), giving us $2 / 1 = $2 as the value of one right. Therefore, the correct option is C) $.40.

For more questions like Market click the link below:

https://brainly.com/question/31235187

#SPJ11

Which statements best describe the soft-money opponents to the bank of the united states? multiple select question.

-They thought the Bank restrained state banks from freely issuing notes.
-They were mostly state bankers and their allies.

Answers

The statement that describe the Soft Money Opponent to the bank of the united states

Both of the comments you made about the Bank of the United States' opponents using soft money are true.

They believed that the Bank prevented state banks from creating notes at will: Opponents of soft money thought that the Bank of the United States limited state banks' capacity to produce their own paper money, which they considered as a restriction on their economic independence.

What is Soft Money?

Soft money refers to political contributions that are not directly regulated by campaign finance laws. It typically refers to funds that are donated to political parties or party committees rather than directly to individual candidates. Soft money can be used for various party-building activities, such as voter registration drives, issue advocacy, and generic party advertising.

In the United States, the term "soft money" gained prominence in the context of campaign finance reform. Prior to the passage of the Bipartisan Campaign Reform Act (BCRA) in 2002, there were restrictions on the amount of money that could be donated directly to candidates or parties for specific campaign purposes (known as "hard money"). However, there were loopholes that allowed individuals, corporations, and unions to donate unlimited amounts of money to political parties for general party activities, which became known as soft money.

The majority of them were state bankers and allies: State bankers and their backers made up the majority of the soft-money opponents. The anti-Bank movement's core was made up of state bankers, who generally opposed centralized banking and supported local control of the currency.

Therefore, both claims are true and aid in capturing the attitude of the Bank of the United States' detractors of soft money.

Learn more about Soft Money here brainly.com/question/12660638

#SPJ4

Which of the following is not part of the definition of a small
business used in this text?
Which
of the following is not part of the definition of a small business
used in this text?
1 point

Answers

The statement that is not part of the definition of a small business is it employs more than 500 employees. Therefore, the correct option is C.

A small business is defined as an independently owned and operated enterprise that has a relatively small number of employees and does not dominate its industry. It employs fewer than 500 employees, but it can have more than 1 employee. It can be a sole proprietorship, partnership, or corporation.

The terms that are part of the definition of a small business include: a. It is independently owned. b. It employs fewer than 500 employees. d. It is not dominant in its field.e. It is independently operated.

Therefore, option C, It employs more than 500 employees is not part of the definition of a small business.

Note: The question is incomplete. The complete question probably is: Which of the following is not part of the definition of a small business? A) It is independently owned. B) It employs fewer than 500 employees. C) It employs more than 500 employees. D) It is not dominant in its field. E) It is independently operated.

Learn more about Small business:

https://brainly.com/question/28520481

#SPJ11

The production function for good y is y = max{10x1,4x2}, where x1 and x2 are the amounts of factors 1 and 2. Find the cost function for good y.
Rocco’s Pasta Bar makes manicotti according to an old family recipe which states M = min{5/4C, 5P}, where M, C, and P are pounds of manicotti, cheese, and pasta respectively. If cheese costs $3 per pound and pasta costs $4 per pound, how much would it cost to produce 20 pounds of manicotti in the cheapest way possible?

Answers

The cost function for producing good y in the given production function is C(y) = 10x1 + 4x2, where x1 and x2 represent the amounts of factors 1 and 2.

In the production function y = max{10x1, 4x2}, the output (good y) is determined by taking the maximum value between 10x1 and 4x2. To find the cost function, we need to determine the costs associated with factors 1 and 2.

In this case, the cost function for producing good y is C(y) = 10x1 + 4x2, where x1 and x2 represent the quantities of factors 1 and 2, respectively. The cost of producing good y is the sum of the costs of each factor used in the production process.

For the second part of the question, to determine the cost of producing 20 pounds of manicotti in the cheapest way possible, we need to minimize the cost function based on the given recipe. The recipe states M = min{5/4C, 5P}, where M represents the pounds of manicotti, C represents the pounds of cheese, and P represents the pounds of pasta.

Since the cost of cheese is $3 per pound and the cost of pasta is $4 per pound, we can substitute these values into the cost function. By minimizing the cost function, we can determine the optimal combination of cheese and pasta that would result in the lowest cost for producing 20 pounds of manicotti.

Learn more about pounds, below:

https://brainly.com/question/17275505

#SPJ11

A firm is not measuring its free cash
flow properly if it states that it intends to use it to:
a. Pay dividends.
b. Make acquisitions.
c. Upgrade its obsolete IT system.
d. Make interest payments.

Answers

A firm is not measuring its free cash flow properly if it states that it intends to use it to pay dividends. Therefore the correct option is a. Pay dividends.

Free cash flow is the remaining cash that a firm has after covering all its capital expenditures, including dividends and interest payments. It serves various purposes, such as reinvesting in the business, share repurchases, acquisitions, and debt reduction. However, if a firm declares its intention to use free cash flow for dividend payments, it indicates a misinterpretation or mismanagement of free cash flow.

The declaration of a large dividend payment may be an attempt by the firm to attract shareholders and maintain its reputation. However, it is crucial to evaluate the firm's actual free cash flow before committing to such dividend payouts. Failing to accurately assess the free cash flow can result in paying dividends that the firm cannot afford. This can lead to financial crises and harm the long-term prospects of the business.

Instead, a firm should prioritize utilizing its free cash flow for strategic purposes that contribute to the growth and stability of the company. This includes making acquisitions, upgrading obsolete IT systems, and fulfilling interest payment obligations.

In conclusion, a firm is not correctly measuring its free cash flow if it states its intention to use it for dividend payments. Free cash flow should be evaluated and allocated strategically to support the firm's growth, financial stability, and long-term prospects. Misjudging the available free cash flow for dividend payouts can have adverse consequences for the business. Therefore, the correct approach is to prioritize other uses of free cash flow and ensure proper financial management.

To know more about cash flow click here:

https://brainly.com/question/32279910

#SPJ11

Critically discuss the key differences between the vertical integration model of managing supply and outsourcing. You should include at least one example of a real-life organisation to support your answer.

Answers

Vertical integration involves owning and controlling multiple stages of the supply chain, while outsourcing involves contracting external parties to perform specific tasks. An example is Apple's vertical integration vs. Samsung's outsourcing.

Vertical integration and outsourcing are two contrasting approaches to managing the supply chain, each with its own advantages and disadvantages. Vertical integration involves owning and controlling multiple stages of the supply chain, from raw material production to retail. This allows for greater control over quality, cost, and coordination between different stages. For example, Apple is known for its vertical integration, as it designs its own hardware, software, and retail stores, ensuring a seamless user experience. On the other hand, outsourcing involves contracting external parties to perform specific tasks or provide components or services. This allows companies to focus on their core competencies while leveraging specialized expertise and cost efficiencies. Samsung, for instance, extensively outsources manufacturing to suppliers and contract manufacturers, allowing them to quickly scale production and access specialized manufacturing capabilities. The key differences between vertical integration and outsourcing lie in control, cost, flexibility, and risk. Vertical integration provides more control but can be costly and limit flexibility. Outsourcing offers cost advantages and flexibility but may involve dependency on external partners and potential quality and coordination risks. Organizations need to carefully evaluate their strategic goals, capabilities, and industry dynamics to determine the most suitable approach to managing their supply chain.

learn more about supply chain here:

https://brainly.com/question/28165491

#SPJ11

Based on international research, three classifications were developed to explain why individuals join unions. Which among the following is not one of the reasons? Utility-based reasons Dissonance-based reasons Political and ideological reasons Social reasons

Answers

Based on international research, political and ideological reasons are not one of the reasons why individuals join unions. Therefore, the correct option is option 3.

Union membership is frequently viewed as a way for employees to gain more control over their work environment, bargain for better pay and benefits, and achieve greater job protection. Based on international research, the following three reasons have been identified as to why individuals join unions:

Utility-based reasons - This includes wage increases, benefits, job security, or working conditions that a union may have the power to negotiate for its members.Dissonance-based reasons - Dissonance-based reasons refer to dissatisfaction or a difference in values between the individual and the organization. When employees believe they are being mistreated or are being undervalued, they may join a union.Social reasons - This is when a worker seeks out the company of like-minded people who share similar values and attitudes to support their social needs.

However, based on international research, political and ideological reasons are not one of the reasons why individuals join unions. Instead, they may do so for practical or personal reasons related to their job, such as job security and salary increases. Hence, the correct answer is option 3.

Learn more about Union:

https://brainly.com/question/30242769

#SPJ11

Manchester United football club have an EPS of $32, and a net income of $50 million. Based on this how many shares outstanding do they have?
O a. 607,000 shares
O b. 18,503,000 shares
O c. 16,800,000,000 shares
O d. 1,562,000 shares 1 paink

Answers

Manchester United football club have an EPS of $32, and a net income of $50 million. The correct answer is Option D: 1,562,000 shares.

Based on an EPS of $32 and a net income of $50 million, Manchester United football club would have 1,562,000 shares outstanding.

To calculate the number of shares outstanding, we can use the formula:

Shares Outstanding = Net Income / EPS

Substituting the given values:

Shares Outstanding = $50,000,000 / $32

Shares Outstanding = 1,562,500 shares

Therefore, the correct answer is Option D: 1,562,000 shares.

Learn more about EPS here

https://brainly.com/question/19578852

#SPJ11

Thailand raised the minimum wage to 300 baht for formal sector workers in all provinces in 2013. Suppose that one province with a large manufacturing sector employed 20,000 people. The province saw an increase in the minimum wage from 200 to 300 baht per day for formal workers. A few months after the minimum wage increase the total provincial employment of formal workers in manufacturing declined to 16,000 people. What is the own-wage elasticity of demand? Is it elastic or inelastic?

Answers

Since the own-wage elasticity of demand is negative and its absolute value is less than 1, we can conclude that the demand for formal workers in manufacturing is inelastic.

To calculate the own-wage elasticity of demand, we can use the formula:

Own-Wage Elasticity of Demand = (% Change in Quantity Demanded) / (% Change in Wage)

In this case, the initial employment level was 20,000 workers, and after the minimum wage increase, it decreased to 16,000 workers.

The percentage change in quantity demanded can be calculated as follows:

% Change in Quantity Demanded = [(New Quantity Demanded - Initial Quantity Demanded) / Initial Quantity Demanded] * 100

% Change in Quantity Demanded = [(16,000 - 20,000) / 20,000] * 100 = -20%

The percentage change in wage is given by the minimum wage increase:

% Change in Wage = [(New Wage - Initial Wage) / Initial Wage] * 100

% Change in Wage = [(300 - 200) / 200] * 100 = 50%

Now we can calculate the own-wage elasticity of demand:

Own-Wage Elasticity of Demand = (-20% / 50%) = -0.4

Since the own-wage elasticity of demand is negative and its absolute value is less than 1, we can conclude that the demand for formal workers in manufacturing is inelastic. This means that the quantity demanded is not very responsive to changes in wages, indicating that employers are less sensitive to wage increases and are willing to reduce employment to a lesser extent.

Learn more about employment rates at:

brainly.com/question/13280244

#SPJ11

A manager must decide which type of machine to buy, A, B, or C. Machine costs (per individual machine) are as follows: Machine Cost A $ 60,000 B $ 50,000 C $ 60,000 Product forecasts and processing times on the machines are as follows: PROCCESSING TIME PER UNIT (minutes) Product Annual Demand A B C 1 8,000 3 6 3 2 11,000 1 3 1 3 19,000 5 4 4 4 22,000 3 2 2

Answers

The manager's decision to choose which machine to buy is based on the overall cost of ownership of each machine, which is determined by the product demand and processing time required. Since the manager wants to make the most cost-effective decision.

The decision is based on the total processing time and overall cost of ownership for each machine. The optimal choice for the manager is machine B because it has the lowest cost of ownership.The total processing time per unit for each product on each machine is calculated by multiplying the annual demand by the processing time per unit.Using these figures, we can calculate the total processing time required for each machine to process all four products. The following table shows the total processing time required for each machine for each product.

Product Machine A Machine B Machine C 1 192,000 240,000 192,000 2 66,000 55,000 66,000 3 72,100 76,000 76,000 4 79,200 44,000 44,000Total Processing Time 409,300 415,000 378,000The cost of ownership of each machine can be calculated by multiplying the machine cost by the number of machines needed to complete the processing time required. For example, if the machine requires 1,000 hours of processing time, it will take 1,000/60= 16.67 machine-hours to complete the job.Assuming that each machine works for 2,000 hours per year, the number of machines needed for each machine can be calculated as follows:Machine A: 409,300 / (2,000*60) = 3.41 machinesMachine B: 415,000 / (2,000*60) = 3.46 machinesMachine C: 378,000 / (2,000*60) = 3.15 machinesUsing these figures, the total cost of ownership for each machine can be calculated by multiplying the number of machines by the cost of each machine.question.

To konw more about demand visit:

https://brainly.com/question/30402955

#SPJ11

TRUE / FALSE. An Economic Union is the least common form of Free Trade Agreement between countries. True False

Answers

An Economic Union is a higher level of economic integration than a free trade agreement, and it is not the least common form of free trade agreement between countries. Therefore, the statement "An Economic Union is the least common form of Free Trade Agreement between countries" is false.What is an economic union?An economic union is a type of trade bloc that entails a high degree of economic integration between countries. It goes beyond a typical free trade agreement, which only seeks to lower trade barriers between nations.Economic integration refers to the extent to which various economic processes such as investment, production, and consumption are interconnected between countries. The more closely integrated two or more economies are, the higher the degree of economic integration is between them.Examples of Economic Unions:Economic unions have varying levels of integration, and they can be established for a variety of reasons. Some of the most well-known economic unions include:The European Union (EU)MercosurThe East African Community (EAC)The Eurasian Economic Union (EAEU)The Union of South American Nations (UNASUR)The Caribbean Community (CARICOM)Conclusion:An Economic Union is a higher level of economic integration than a free trade agreement, and it is not the least common form of free trade agreement between countries. Hence, the statement "An Economic Union is the least common form of Free Trade Agreement between countries" is false.

For more question like Trade visit the link below:

https://brainly.com/question/30971221

#SPJ11

when an agent of an investment adviser prepares a client balance sheet, all of the following are considered to be personal possessions except:

Answers

Answer: The personal possessions of a client are their assets. Examples of personal possessions include cash, stocks, bonds, mutual funds, real estate, vehicles, and other valuable properties.

An investment adviser provides advice to clients on various investment opportunities. The advice provided is based on the goals, risk tolerance, and financial situation of the client. One of the tools used by an investment adviser in managing the investments of clients is a balance sheet.A balance sheet is a document that presents the assets and liabilities of a client at a specific point in time. It helps in determining the net worth of a client. When an agent of an investment adviser prepares a client balance sheet, all of the following are considered to be personal possessions except liabilities.The personal possessions of a client are their assets. Examples of personal possessions include cash, stocks, bonds, mutual funds, real estate, vehicles, and other valuable properties. On the other hand, liabilities are debts or obligations that a client owes. Examples of liabilities include loans, mortgages, credit card balances, and other forms of debt.An investment adviser's agent should consider all the personal possessions of a client when preparing a balance sheet. This helps to understand the client's financial position and make informed investment decisions. It is essential to understand the client's assets and liabilities when developing an investment strategy. It ensures that the investment decisions align with the client's goals, risk tolerance, and financial situation.In conclusion, when preparing a client balance sheet, an investment adviser's agent should consider all personal possessions except liabilities. This ensures that the investment decisions made align with the client's goals, risk tolerance, and financial situation. On the other hand, liabilities are debts or obligations that a client owes. Examples of liabilities include loans, mortgages, credit card balances, and other forms of debt.

To know more about client visit;

brainly.com/question/29051195

#SPJ11

If over a short time a large number of teenagers become old enough to find employment and a much smaller number of people retire, then productivity A.and real GDP per person rise. B.rises but real GDP per person falls. C.falls but real GDP per person rises. D.and real GDP per person fall.

Answers

If over a short time, a large number of teenagers become old enough to find employment and a much smaller number of people retire, both productivity and real GDP per person are likely to rise.

When a large number of teenagers enter the workforce and the number of retirees is relatively small, it results in an increase in the labor force.

The increase in the labor force can lead to higher productivity as more people are actively engaged in economic activities. With a larger workforce, there is potential for increased output and economic growth.

This, in turn, can contribute to an increase in real GDP per person, as the total output is divided among a larger population. Therefore, the correct answer is A. Both productivity and real GDP per person rise.

To learn more about GDP click here: brainly.com/question/30504843

#SPJ11

A 10-year $1,000 par value bond pays a 7% APR coupon
semi-anually. If the yield on similar bonds is 6%, what is the
current yield? No excel or financial calculator please.

Answers

The current yield of the bond is approximately 3.82%, given a yield on similar bonds of 6%.

The current yield of a bond is determined by dividing the annual coupon payment by the bond's market price. In this case, the bond has a $1,000 par value and a 7% APR coupon rate, paid semi-annually. To calculate the current yield, we need to find the market price of the bond.

To find the market price, we first need to calculate the semi-annual coupon payment. The annual coupon payment is $1,000 multiplied by 7%, which equals $70. Since the bond pays coupons semi-annually, each coupon payment is $70 divided by 2, resulting in $35.

Now, let's determine the market price of the bond. The yield on similar bonds is 6%, which is equivalent to a 3% semi-annual yield. We can use the formula for present value of a bond to find the market price:

Market Price = (Coupon Payment / Semi-Annual Yield) * (1 - (1 / (1 + Semi-Annual Yield)^n))

In this case, n is the total number of semi-annual periods, which is 10 years multiplied by 2 (since coupons are paid semi-annually), resulting in 20 semi-annual periods.

Plugging in the values, we get:

Market Price = ($35 / 0.03) * (1 - (1 / (1 + 0.03)^20))

Solving this equation, the market price of the bond is approximately $917.33.

Now that we have the market price, we can calculate the current yield:

Current Yield = (Coupon Payment / Market Price) * 100

Plugging in the values, we get:

Current Yield = ($35 / $917.33) * 100 ≈ 3.82%

Therefore, the current yield of the bond is approximately 3.82%, given a yield on similar bonds of 6%.

Learn more about current yield here

https://brainly.com/question/29435748

#SPJ11

Ans the both ques in 3/4 lines
> Identify the three elements of cost incurred in manufacturing a product and indicate the distinguishing characteristics of each. ➤ Why might a company claim that the total cost of employing a pers

Answers

The three elements of cost incurred in manufacturing a product are as follows:

Materials, Labor, Manufacturing overheads

A company may claim that the total cost of employing a person is more than their salary for the following reasons:

Employee benefits, Administrative costs, Fringe benefits

Materials: The first cost element is the raw materials, including the parts that go into the product and any substances required to manufacture it.

Labor: The second cost component is labor, which covers the salaries and wages of those individuals who work in the manufacturing process. It may also include employee benefits like health care, retirement benefits, and vacation time.

Manufacturing overheads: The third cost element is manufacturing overhead, which covers all of the other costs involved in manufacturing the product. It may include indirect labor, depreciation on factory machinery, maintenance and repairs on equipment, utilities, insurance, and taxes.

A company may claim that the total cost of employing a person is more than their salary for the following reasons:

Employee benefits: A company's benefits package may add up to a significant cost beyond the employee's salary. Benefits can include paid leave, healthcare, retirement plans, and other perks.

Administrative costs: Hiring and training employees, conducting performance reviews, and paying payroll taxes are just a few examples of administrative costs associated with employing someone.

Fringe benefits: These are benefits that are not included in a person's salary. These can include things like company cars, cell phone reimbursements, and expense accounts, among other things.

Learn more about Administrative costs:

https://brainly.com/question/30673061

#SPJ11

1.What did the FCC’s net neutrality rules decide in 2015 about whether or not ISPs can be regulated as public utilities, and why is this important?
2. Are you in favor of network neutrality? Why or why not?
3. Do you believe broadband providers should be allowed to charge companies like Netflix and hulu a premium for their bandwidth consumption?
4. What are some potential consequences for consumers of ending net neutrality regulations?

Answers

The FCC's net neutrality rules in 2015 classified broadband internet service providers (ISPs) as public utilities, allowing them to be regulated under Title II of the Communications Act. This decision aimed to ensure that ISPs treat all internet traffic equally without blocking, throttling, or prioritizing certain content.

The AI model does not have personal opinions or preferences. It can provide a neutral analysis of network neutrality based on facts and arguments from different perspectives.

The AI model does not have personal opinions or preferences. The question of whether broadband providers should charge companies like Netflix and Hulu a premium for bandwidth consumption is a topic of debate. Some argue that such fees would enable ISPs to manage network congestion and invest in infrastructure, while others argue that it could create an unfair advantage for large companies and stifle innovation.

Ending net neutrality regulations could have several potential consequences for consumers. It may lead to ISPs favoring certain content or charging additional fees for faster access to certain websites or services. This could result in a tiered internet where only those who can afford to pay more have access to higher-quality or faster internet. It could also limit competition and innovation, as smaller startups may struggle to compete with established companies that can afford to pay for preferential treatment. Additionally, it may limit consumers' freedom of choice and access to a diverse range of online content and services.

Learn more about net neutrality regulations here:

https://brainly.com/question/31664179

#SPJ11

Outdoor Sports is considering adding a putt putt golf course to its facility. The course would cost $171,000, would be depreciated on a straight-line basis over its 4-year life, and would have a zero salvage value. The sales would be $98,400 a year, with variable costs of $27.900 and fixed costs of $12.500. In addition, the firm anticipates an additional $19,300 in revenue from its existing facilities if the putt putt course is added. The project will require $3,100 of net working capital, which is recoverable at the end of the project. What is the net present value of this project at a discount rate of 15 percent and a tax rate of 34 percent?

Answers

The report of net present value is attached in the image below:

The difference between the current value of cash inflows and withdrawals over a period of time is known as net present value (NPV). To evaluate the profitability of a proposed investment or project, NPV is used in capital budgeting and investment planning.

Using the appropriate discount rate, computations are performed to determine the current value of a stream of future payments or NPV. Projects that have a positive NPV are generally worthwhile pursuing, whereas those that have a negative NPV are not.

Learn more about Net Present Value here:

https://brainly.com/question/32720837

#SPJ4

Salaries for Database Administrators. Database administrators (DBAs) are among the highest paid professionals in the information technology field. Many people work for 10 to 20 years to get a promotion to DBA. Connect to Monster.com (www.monster.com) or another job database of your choice and search for DBA job openings. As you do, select all locations and job categories and then use "dba" as the keyword search criteria. How many DBA job postings did you find? In what industries were some of the DBA job openings? Read through a couple of the job postings. What sort of qualifications were listed? (at least 200 words)

Answers

DBA job postings often require a combination of technical skills, experience, and educational qualifications. Common qualifications include a bachelor's or master's degree in computer science, information technology, or a related field.

Employers may also prefer candidates with certifications such as Oracle Certified Professional (OCP) or Microsoft Certified Database Administrator (MCDBA). In terms of technical skills, DBA job postings often require proficiency in database management systems (DBMS) like Oracle, SQL Server, MySQL, or PostgreSQL.

Knowledge of database design, performance tuning, backup and recovery, and security protocols is also important. Additionally, employers may seek candidates with experience in database administration, data modeling, SQL programming, and scripting languages.

Furthermore, job postings may highlight desired soft skills such as strong problem-solving abilities, attention to detail, excellent communication and collaboration skills, and the ability to work in a team environment. It's important to note that specific qualifications and requirements may vary depending on the employer, industry, and level of the DBA position.

Therefore, it's recommended to review job postings on relevant job databases to gather the most accurate and up-to-date information on qualifications for DBA positions.

To learn more about Communication here: https://brainly.com/question/25020821

#SPJ11

Compare the long-run equilibrium position of a perfectly competitive firm and a monopolist. Illustrate your answer with the aid of diagrams.

Answers

In terms of long-run equilibrium, a perfectly competitive firm and a monopolist differ greatly. A perfect competition market structure is one in which many sellers offer identical products to many buyers; there are no barriers to entry and exit; and companies have no pricing control as they are price takers. Monopoly, on the other hand, is a market structure in which a single supplier controls the entire market and faces no competition.

In the long-run equilibrium of perfect competition, each company will have zero economic profit. In contrast, a monopolist can earn a positive economic profit in the long run equilibrium. This is due to the fact that they are not limited in terms of price as they are the sole supplier in the market. This implies that they may charge a price that exceeds the marginal cost. The following are the main points of differentiation between a perfectly competitive firm and a monopolist:

A perfect competition is a market structure in which a large number of suppliers offer identical products, there are no barriers to entry or exit, and companies have no pricing control as they are price takers. A monopoly, on the other hand, is a market structure in which a single supplier controls the entire market and faces no competition. In the long-run equilibrium of perfect competition, each company will have zero economic profit. On the other hand, a monopolist may earn a positive economic profit in the long run equilibrium because they are not limited in terms of price as they are the sole supplier in the market.

In the long run, a monopolist can earn abnormal profit whereas perfect competition earns normal profit.

In the long-run equilibrium, each firm in perfect competition produces where price equals marginal cost (P = MC). Therefore, the perfectly competitive firm’s long-run equilibrium is when price equals the minimum average total cost (ATC) and each firm earns zero economic profit. Economic profits equal zero in the long-run because in the short-run, profits attract new firms, and supply increases which in turn reduces the market price until it reaches a point where firms are earning normal profit.

A monopolist, on the other hand, is a sole supplier of a particular good or service in the market. A monopolist is a price maker who has a downward-sloping demand curve. They can choose to increase price or reduce quantity supplied, or reduce price and increase quantity supplied because of the market demand. In a monopoly, the monopolist’s profit-maximizing output occurs at a point where marginal revenue (MR) equals marginal cost (MC). Since MR is less than price (P) in a monopoly, the monopolist’s profit-maximizing output (Q*) and price (P*) are higher than the output and price in perfect competition. The long-run equilibrium position of a monopolist is at a level where marginal cost (MC) equals marginal revenue (MR). The monopolist earns positive economic profit due to their ability to charge a price that exceeds their marginal cost in the long-run equilibrium. In contrast, in perfect competition, the price is equal to the minimum ATC and profits are zero.  In summary, perfect competition and monopolist differ in terms of their pricing power, the number of suppliers, the degree of market competition, and the long-run equilibrium profitability. The perfectly competitive firm earns normal profit, whereas the monopolist earns abnormal profits.

Learn more about economic profit: https://brainly.com/question/13716014

#SPJ11

Assignment i Adams Company produces a product that has a variable cost of $25 per unit and a sales price of $55 per unit. The company's annual fixed costs total $730,000. It had net income of $290,000

Answers

The Adams Company had a net income of $290,000. Net income is the amount of profit a company has after deducting all expenses, including variable costs and fixed costs, from its total revenue.

In this case, the company's total revenue can be calculated by multiplying the sales price per unit ($55) by the number of units sold. The variable cost per unit is subtracted from the sales price to calculate the contribution margin per unit. The contribution margin per unit is then multiplied by the number of units sold to determine the contribution margin, which covers both variable and fixed costs.

By subtracting the fixed costs ($730,000) from the contribution margin, we can find the net income. In this scenario, the Adams Company generated a net income of $290,000, indicating a profitable outcome.

To learn more about Net income  here

https://brainly.com/question/32614743

#SPJ4

Other Questions
1. Supporters of protectionism in Third World countries who argue that tariffs and other trade barriers are needed to spur economic growth base their arguments on:Group of answer choicesboth historical experience and the theory of comparative advantage.historical experience (how did Britain, the United States, Japan, and other countries industrialize).economic theory (comparative advantage).neither historical experience NOR the theory of comparative advantage.2. Please write an example of comparative advantage in trade that involves U.S. imports and exports of non-manufactured goods with one other country.Because a lot of trade in manufactured goods is intra-industry (for example the United States exports and imports commercial jet liners with Europe), DO NOT use manufactured goods in your example.Remember: do not give an example using manufactured goods (cars, planes, electronics, clothing, etc.)Remember: please only give an example of one import and one export involving the United States and one other country. I will grade the most wrong answer and deduct a point if there are more than one example. The industrial company PedersensIndustri AS produces one product and has set up the following cost calculation per unit:Sales price 90 000Direct material 35 000Direct salary 20 000Indirect variable costs 10 000Indirect fixed costs 13 000Self cost 78 000Profit 12 000The calculation is based on a normal production of 1000 units per period. The fixed costs are operationally independent within a maximum production capacity of 1250 units per period.a) What must the sales price be for the coverage rate for the product to be 40%?b). The company receives a request to deliver 10 units of the product for SEK. 82000 per unit. Should the company accept this order?c). The next period, the company has a goal of achieving a profit of SEK. 2000,000. How many units must the company sell to make this profit? Your task is choosing a business and discuss the future applications of information technology for this business. You can find similar scenarios in the course contents. You will apply knowledge accumulated in the unit, labour market data, research into available education and training options; and will integrate this information with a discussion of current challenges for the business and the contribution that IT can reasonably be expected to make in meeting those challenges.Deliverables Word length: 2,000 Socio-cultural aspects in Ethiopian population language, health, and Language what does a company do to compensate for these differences forusing predetermined overhead rate instead of actual overheadrate with respect to the benefits of clean air and water, which of the following would most likely be classified as being relatively easy to value in economic terms? Which of the following best describes the best approach to sampling participants in qualitative research study looking at participants' experience: balancing the demands of studying and being physically active? 3) Solve the trigonometric equation 2 sin 0 - 5sin0 + 3 = 0 on the interval 0 0 2. Show each step to justify your solutions. [DOK 3: 4 marks] 4) Write at least a paragraph justifying your Evaluate f(-3), f(0), and f(2) for the piecewise defined function. Then sketch the graph of the function.(x)= {-1 if < 1 {7- 2x if x>1 A bacteria culture starts with 2000 bacteria. [6 marks total] a) After 6 hours the estimated count is 60 000. How long does it take for the number of bacteria to double? Round your answer to 2 decimal places of an hour. [3 marks] b) Assume the doubling period was half an hour. How long will it take the bacteria population to grow to 90000? Round your answer to 2 decimal places of an hour. In an election to choose a class representative, the winner got 4 more votes than the second candidate. If 40 learners voted and the winner goy y votes. Find: a) The number of votes the winner got b) The number of votes the second candidate got Answer the following questions: a) Explain the meaning of the terms 'licensing agreement' and 'royalty' associated with a company manufacturing a product 'under license'. b) You have developed expertise in the field of hydraulic pumps and want to strengthen your 'LinkedIn' page by describing the latest concept designs you are developing for your company. What considerations should you make before updating your profile with this information? c) Your company has developed new software called 'DRIVER' to control a novel mechanical drive system. What IP should you consider to cover your new software? d) What is the most appropriate IP cover for a new engine lubricant formulation and why? a 56-year-old male is found semiconscious by his wife. your assessment reveals that his respirations are rapid and shallow, his pulse is rapid and irregular, and his blood pressure is low. the patient's wife states that he complained of left arm pain and nausea the day before, but would not allow her to call 9-1-1. the most likely cause of this patient's present condition is: A survey of 320 families with 5 children each revealed the following distribution: Number ol boys Number of girl Number of 5 0 19 4 3 2 1 1 2 3 4 48 104 84 52 0 5 13 Calculate the Test-Statistic to test the hypothesis that male and female births are equally probable. a) x = 10.58 b) y = 12.36 c) o x = 11.88 d) x = 9.25 Bond types and characteristic Several years ago you purchased a callable corporate bond at its $1,000 par value. The bond's call price is $1,050. Since you purchased the bond, interest rates have fallen a little, and the bond's market price is $1,030.If the bond is called from you today, what is the call premium?Question content area bottomIf the bond is called from you today, the call premium is$enter your response here.----------------- (Round to the nearest dollar.) Discovery, the information gathering stage of the trial process, serves several purposes. discovery: Based upon the discussions on the 5-forces model and business strategy, describe how product differentiation strategy may influence a firms relationships with buyers and suppliers to affect economic value the firm can create.Johny Ive, the chief design officer at Apple, left Apple in 2019 to start his own design firm, LoveFrom. LoveFrom provides innovative industrial designs to clients in various sectors. Based on our discussion on social capital, please discuss the types of social capital Johny should create to promote his firms innovation capability. Consider the following variance/covariance matrix of assets A, B and C (presented in that sequence):0.1 -0.3 0-0.3 0.15 00 0 0.25What are the standard deviations of assets A and B?A. 0.1% and 0.15% respectivelyB. 10% and 15% respectivelyC. 3.16% and 3.87% respectivelyD. 31.6% and 39.3% respectivelyE. Unable to be computed with the information provided A gram dealer can sell 12 game consoles per week at a price of $2,000 each. She estimates that each #400 price decrease will result in 3 more sales per week. If the consoles cost her $1200 each, what price should shecharge to maximize profit? How any will she sell per weak? You are a manufacturer of tennis balls in the Mumbai Suburbs. Recently, you got an order to supply 1200 units of the same on a monthly basis. The cost of carrying an inventory of such tennis balls is 1.80 per unit on yearly basis. The production process requires a setup cost on a per run basis of Rs 1000.Compute:a. The EOQ, and define the need of computing the EOQb. The Optimum number of orders and optimum period of supply