Given the plot of normal distributions A and B below, which of
the following statements is true? Select all correct answers.
A curve labeled A rises to a maximum near the left of the
horizontal axis a

The probability of the P(F or G) is 0.667.

A probability experiment is conducted in which the sample space of the experiment is S={ 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, event F={5, 6, 7, 8, 9}​, and event G={9, 10, 11, 12}. Assume that each outcome is equally likely.

To list the outcomes in F or G, we need to combine both events F and G and eliminate any duplicates.

So, the outcomes in F or G are:

F or G = {5, 6, 7, 8, 9, 10, 11, 12}

Hence, A. F or G = { 5, 6, 7, 8, 9, 10, 11, 12}

Next, to find P(F or G) by counting the number of outcomes in F or G, we can use the formula:

P(F or G) = n(F or G) / n(S)

where, n(F or G) is the number of outcomes in F or G and n(S) is the number of outcomes in the sample space.

So, n(F or G) = 8 and n(S) = 12

Hence, P(F or G) = n(F or G) / n(S) = 8/12 = 0.667 (rounded to three decimal places)

Therefore, B. P(F or G) = 0.667

Finally, to determine P(F or G) using the general addition rule, we can use the formula:

P(F or G) = P(F) + P(G) - P(F and G)

where, P(F) and P(G) are the probabilities of events F and G, and P(F and G) is the probability of the intersection of events F and G.

To find P(F and G), we can use the formula:

P(F and G) = n(F and G) / n(S)

where, n(F and G) is the number of outcomes in both F and G.

So, n(F and G) = 1

Hence, P(F and G) = n(F and G) / n(S) = 1/12

Therefore, A. P(F or G) = (5/12) + (4/12) - (1/12) = 8/12 = 0.667 (rounded to three decimal places)

To learn more about probability refer here

https://brainly.com/question/32004014#

#SPJ11

a. The 95% confidence interval for the average temperature at which this balloon will be in a steady-state equilibrium is approximately -19.32°C to -16.68°C.

(b) If the average temperature in the crown of the balloon goes above the high end of the confidence interval (-16.68°C in this case), we would expect the balloon to go up

a Using a Z-score table or a statistical calculator, the Z-score for a 95% confidence level is approximately 1.96.

Substituting the values into the formula:

CI = -18 ± 1.96 * (5/√55)

CI = -18 ± 1.96 * (5/7.416)

CI ≈ -18 ± 1.32

Lower limit = -18 - 1.32 ≈ -19.32°C

Upper limit = -18 + 1.32 ≈ -16.68°C

The 95% confidence interval for the average temperature at which this balloon will be in a steady-state equilibrium is -19.32°C to -16.68°C.

(b) If the average temperature in the crown of the balloon goes above the high end of the confidence interval (-16.68°C in this case), we would expect the balloon to go up. Hot air is less dense than cool air, so when the air inside the balloon is hotter than the surrounding air, it provides buoyancy and causes the balloon to rise.

Learn more about confidence interval on

https://brainly.com/question/15712887

#SPJ4

The Product Utilizing the Product-to-Sum Cosine Formula.

We can use the following trigonometric identity:

[tex]$$2 \sin A \cos B = \sin (A + B) + \sin (A - B) $$[/tex]

Thus, [tex]$$8x \sin 6x = 4(2 \sin 6x) \cdot (2 \cos 0)$$[/tex]

[tex]$$= 4[\sin (6x + 0) + \sin (6x - 0)]$$[/tex]

[tex]$$= 4[\sin 6x + \sin 6x]$$[/tex]

Therefore, the given product can be expressed as a sum of sines containing only sines as shown below:

[tex]$$\boxed{8x \sin 6x = 8 \sin 6x + 0}$$.[/tex]

cosαcosβ=12[cos(α−β)+cos(α+β)]

cosαcosβ=12[cos(α−β)+cos(α+β)]

How to express as a sum a product of cosines.

Create the cosine product formula in writing.

Add the specified angles as replacements to the formula.

Simplify.

Figure 1 Summarizing the Product Utilizing the Product-to-Sum Cosine Formula.

Learn more about trigonometric here.

https://brainly.com/question/29156330

#SPJ11

The lengths of sides a and b are required in order to determine the values of the six trigonometric functions (sine, cosine, tangent, cosecant, secant, and cotangent) of angle or angle 0 in the shown figure. Only the values of a (28) and b (21) are given, though.

We need more details about the angles or lengths of the other sides of the triangle in order to calculate the values of the trigonometric functions. It is impossible to determine the precise values of the trigonometric functions without this knowledge.

We could use the ratios of the sides to compute the trigonometric functions if we knew the lengths of other sides or the measurements of other angles. As an illustration, sine () denotes opposed and hypotenuse, cosine () adjacent and hypotenuse, tangent opposite and adjacent, and so on.

learn more abour trigonometric here :

https://brainly.com/question/29156330

#SPJ11

The average price of gasoline sold is 981.6 USD and the average promotional expense per sale is 2.92 USD.

To calculate the average price of gasoline sold, we can use the AVERAGE function in Excel. In this case, we'll select the range of prices from cell A1 to A26 and the formula would be =AVERAGE(A1:A26). This gives us an average price of 981.6 USD.

To calculate the average promotional expense per sale, we'll use the same approach. We'll select the range of promotional expenses from cell B1 to B26 and apply the AVERAGE function. The formula would be =AVERAGE(B1:B26), which gives an average promotional expense of 2.92 USD per sale.

It's worth noting that these calculations assume that each row of data represents a single sale of gasoline with its corresponding price and promotional expense. If the data represent multiple sales over a period, then we'd have to adjust our approach accordingly.

Learn more about average price here

https://brainly.com/question/15416867

#SPJ11

Based on the data you provided, we can perform some analysis in Excel. We can use the following steps to calculate the average price and promotional expenses: Price ($) 949 941 934 921 915 909 904 1014 1006 990 978 962 955 953 1050 1040 1038 1022 1021 1018 1010 935 1015 1006 999 978 Promotional Exp (SK) 5 3.5 4.8 3.6 4.3 1.7 4.5 2 2.9 1.2 3 3.2 3 2.8 0.75 1

The sample standard deviation is 4.22 for males and 8.64 for females. The sample size for male employees is 10, whereas it is 10 for female employees as well.

In Minitab, the process for conducting statistical analyses is straightforward and efficient.

Here's how to go about it: The following are the ages of male and female employees in a large company:

Male: 38 34 36 42 30 24 36 33 36 32 Female: 38 34 36 34 49 35 24 25 29 26

Given the data set, we must follow the following procedure:

Step 1: Open Minitab and select the Stat option.

Step 2: Choose Basic Statistics from the drop-down menu.

Step 3: Select "Descriptive Statistics" from the drop-down menu.

Step 4: Input the information for your study in the "Input Variables" section.

Step 5: Choose the appropriate statistics option.

Step 6: Click on the "OK" button.

Step 7: Check the results. Here is the output for male employees:

And here's the output for female employees: Note that the sample mean is 34.5 years for both males and females.

To know more about standard deviation visit:

https://brainly.com/question/13498201

#SPJ11

Therefore, This equation will pass through the point (14,-28).y=-2x.

Explanation: Direct variation is a mathematical relationship between two variables that can be expressed as y=kx, where k is the constant of variation. To find the equation of direct variation that includes the point (14,-28), we need to first determine the value of k.To do this, we can plug in the x and y values from the point into the equation and solve for k.-28 = k(14) Divide both sides by 14 to isolate k.-28/14 = k Simplify.-2 = k Now that we know k is -2, we can write the equation of direct variation as y=-2x. This equation will pass through the point (14,-28).Answer:y=-2x

Therefore, This equation will pass through the point (14,-28).y=-2x.

To learn more about the quadratic equation visit:

brainly.com/question/28038123

#SPJ11

a. Probability < 160 minutes: 0.5279

b. Probability > 160 minutes: 0.4721

c. Probability = 160 minutes: 0 (approx.)

d. Completion time for 90% of games: 177.2 minutes (approx.)

a. The probability that a randomly selected game will be completed in less than 160 minutes can be calculated by standardizing the value using the z-score formula and then looking up the corresponding probability from the standard normal distribution. Given that the average completion time is 159 minutes and the standard deviation is 15 minutes, we can calculate the z-score as follows:

z = (160 - 159) / 15 = 0.0667

Using a standard normal distribution table or a calculator, we can find that the probability corresponding to a z-score of 0.0667 is approximately 0.5279.

Therefore, the probability that a randomly selected game will be completed in less than 160 minutes is approximately 0.5279.

b. The probability that a randomly selected game will be completed in more than 160 minutes can be calculated by subtracting the probability obtained in part (a) from 1, since it represents the complement event. Therefore,

Probability = 1 - 0.5279 = 0.4721

The probability that a randomly selected game will be completed in more than 160 minutes is approximately 0.4721.

c. The probability that a randomly selected game will be completed exactly in 160 minutes for a continuous distribution like the normal distribution is extremely low. It is essentially zero. Therefore, the probability is approximately 0.

d. To find the completion time in which 90% of the games will be finished, we need to determine the z-score corresponding to the upper 10% (since 90% is below it) of the standard normal distribution. Using a standard normal distribution table or a calculator, we can find the z-score associated with the upper 10% as approximately 1.28.

Next, we can use the z-score formula to find the completion time:

z = (x - 159) / 15

Solving for x:

x = (z * 15) + 159 = (1.28 * 15) + 159 = 177.2

Therefore, about 90% of the games will be finished in 177.2 minutes or less (rounded to two decimal places).

Read more on standard normal distribution here: https://brainly.com/question/26822684

#SPJ11

a) Julie made a profit of $405.

b) the selling price of the bike was $3105.

a) To calculate the profit that Julie made, we need to determine the amount by which the selling price exceeds the cost price. The profit is given as a percentage of the cost price.

Profit = 15% of $2700

Profit = (15/100) * $2700

Profit = $405

Therefore, Julie made a profit of $405.

b) To find the selling price of the bike, we need to add the profit to the cost price. The selling price is the sum of the cost price and the profit.

Selling Price = Cost Price + Profit

Selling Price = $2700 + $405

Selling Price = $3105

Therefore, the selling price of the bike was $3105.

In summary, Julie made a profit of $405, and the selling price of the bike was $3105.

For more such questions on profit visit:

https://brainly.com/question/26215194

#SPJ8

The probability of getting an exact number of chips in a randomly selected 18-ounce bag of chocolate chip cookies is zero.

Given: the number of chocolate chips in an 18-ounce bag of chocolate chip cookies is approximately normally distributed with mean μ = 1252 and standard deviation σ = 129 chips

We are asked to find the probability that a randomly selected 18-ounce bag of cookies has the following number of chocolate chips:

P( X = x ) where X is the random variable representing the number of chocolate chips in the bag

We can use the normal distribution formula as follows:

X ~ N( μ = 1252, σ = 129 )

P( X = x ) = 0 ( Since the probability of getting any exact value of X is zero due to the continuous nature of the distribution)

Therefore, the probability of getting an exact number of chips in a randomly selected 18-ounce bag of chocolate chip cookies is zero.

Know more about probability here:

https://brainly.com/question/251701

#SPJ11

The required number of ways is 120.

The number of ways to choose the first scoop = 10

The number of ways to choose the second scoop = 9

The number of ways to choose the third scoop = 8

Total ways to choose a cone = 10 x 9 x 8 = 720

Hence, the required number of ways is 720.Part 2 of 2:

The required number of ways to choose 3 scoops of ice cream from 10 different flavors is the combination of 10 objects taken 3 at a time.

Therefore, the number of ways to choose a cone, if order doesn't matter, is 120.

Therefore, the required number of ways is 120.

Know more about numbers here:

https://brainly.com/question/27894163

#SPJ11

This lack of awareness often stems from the fact that statistics is not well explained in school curriculums or is taught in a way that is too theoretical and does not offer practical examples. In summary, negative preconceived notions about statistics often arise from the perception that it is too complex, dull, and dry, as well as the belief that it is easily manipulated.

Preconceived ideas about the field of statistics have prevented some people from recognizing the value of statistical analysis in decision-making and, as a result, they have a negative attitude towards it. It is often believed that the field of statistics is too complex and mathematical, making it inaccessible to those without mathematical skills or a degree in mathematics.

Statistics is sometimes viewed as a field that is dull, dry, and uninteresting. This is because of the misconception that statistical analysis is simply a collection of data and equations, with no real-world application. Many individuals are put off by the thought of working with numbers and data, and the potential for errors in analysis that can arise. Statistics is frequently seen as a tool for manipulating data to serve the interests of those who are using it.

This misrepresentation is fueled by examples of the use of statistics in the media, where statistics are sometimes manipulated to create a sensational story or to support a particular viewpoint. As a result, individuals become skeptical of the validity of statistics and disregard the value it has to offer. Many people find statistics boring. This is because they do not have an understanding of how statistics can be used to solve real-world problems and make more informed decisions.

This lack of awareness often stems from the fact that statistics is not well explained in school curriculums or is taught in a way that is too theoretical and does not offer practical examples. In summary, negative preconceived notions about statistics often arise from the perception that it is too complex, dull, and dry, as well as the belief that it is easily manipulated.

To know more about data visit:

https://brainly.com/question/29117029

#SPJ11

(a) To calculate the probability of exactly half of the spins landing on black, we need to consider the number of ways we can choose exactly five out of the ten spins to land on black. The probability of a single spin landing on black is 18/38, and the probability of a single spin landing on red (since there are only two possibilities) is 20/38.

We can use the binomial probability formula to calculate the probability:

P(X = k) = C(n, k) * p^k * q^(n-k)

where:

P(X = k) is the probability of exactly k successes,

C(n, k) is the number of combinations of n items taken k at a time,

p is the probability of success on a single trial, and

q is the probability of failure on a single trial.

For exactly half of the spins (k = 5), the probability can be calculated as:

P(X = 5) = C(10, 5) * (18/38)^5 * (20/38)^5

Calculating this expression will give us the probability that exactly half of the spins land on black.

(b) To calculate the probability of at least eight spins landing on black, we need to consider the probabilities of eight, nine, or ten spins landing on black and add them up.

P(X ≥ 8) = P(X = 8) + P(X = 9) + P(X = 10)

Using the same binomial probability formula, we can calculate each of these probabilities:

P(X = 8) = C(10, 8) * (18/38)^8 * (20/38)^2

P(X = 9) = C(10, 9) * (18/38)^9 * (20/38)^1

P(X = 10) = C(10, 10) * (18/38)^10 * (20/38)^0

By calculating these expressions and summing them up, we can determine the probability of at least eight spins landing on black.

Please note that the calculations provided are based on the assumption of a fair roulette wheel with 18 black spaces out of 38 total spaces.

To know more about Expression visit-

brainly.com/question/14083225

#SPJ11

The correct statement is: A. When the distribution is skewed to the left, mean > median > mode.

In a left-skewed distribution, the tail on the left side is longer or more spread out compared to the right side. This means that there are a few extreme values on the left side that pull the mean towards that direction. Since the mean takes into account the values and their distances from the center, it is influenced by these extreme values, making it greater than the median.

The median represents the middle value of the dataset and is less affected by extreme values, so it falls between the mean and mode. The mode is the value or values that occur most frequently in the dataset and is typically less than the mean and median in a left-skewed distribution.

Therefore, the correct statement is that mean > median > mode for a left-skewed distribution.

To know more about distribution refer here:

https://brainly.com/question/29664850

#SPJ11

Percentage change = 10%

We can use the formula:

Percent change = [tex]\frac{New-Old}{Old}[/tex] x 100

Percent change = [tex]\frac{77-70}{70}[/tex]x100

Percent change = [tex]\frac{7}{70}[/tex] x 100

Percent change = 0.1 x 100

Percent change = 10%

Answer: 53.9

Step-by-step explanation:

A box plot is a useful tool for making comparisons between two or more groups, enabling you to assess the distribution and variability of data within each group and identify any potential outliers or differences.

A box plot is a graphical technique used for making comparisons between two or more groups. It displays the distribution of a continuous variable across different categories or groups. The box plot summarizes the data using key statistical measures such as the median, quartiles, and potential outliers.

In a box plot, a box is drawn to represent the interquartile range (IQR), which encompasses the middle 50% of the data. The median is represented by a line within the box. Whiskers extend from the box to represent the minimum and maximum values within a certain range, typically 1.5 times the IQR. Points outside this range are considered outliers and are represented as individual data points or asterisks.

By comparing box plots, you can visually analyze differences in the central tendency, spread, and skewness of the data across different groups. It allows for quick comparisons and identification of potential differences or patterns among the groups being compared.

Therefore, a box plot is a useful tool for making comparisons between two or more groups, enabling you to assess the distribution and variability of data within each group and identify any potential outliers or differences.

To know more about box plot, visit:

https://brainly.com/question/25093000

#SPJ11

The maximum likelihood estimator of 0 in the Uniform(0,0) distribution is 0.

The maximum likelihood estimator (MLE) is a method used to estimate the parameter(s) of a statistical distribution based on the observed data. In this case, we are looking for the MLE of the parameter 0 in a Uniform(0,0) distribution.

Since the probability density function (PDF) of the Uniform(0,0) distribution is defined as 1/0 for 0 ≤ x ≤ 0 and 0 otherwise, the likelihood function for the sample X₁, X₂, ..., Xₙ can be written as:

L(0) = (1/0)ᵏ [tex]\times[/tex] 0ᵐ [tex]\times[/tex] (1/0)ⁿ₋ᵏ₋ₘ

where k is the number of observations falling in the interval (0, 0), m is the number of observations falling outside the interval (0, 0), and n is the total number of observations.

To maximize the likelihood function, we need to maximize (1/0)ᵏ * 0ᵐ, which is only possible if k = n (all observations fall in the interval (0, 0)) and m = 0 (no observations fall outside the interval).

Therefore, the maximum likelihood estimator of 0 in the Uniform(0,0) distribution is 0.

In summary, the MLE of 0 is 0, as all the observations are within the interval (0, 0) according to the given distribution.

For similar question on statistical distribution.

https://brainly.com/question/30390163  

#SPJ8

y = 2x⁴ - x² + c₁x + c₂x³

This is the general solution of the given differential equation.

The given differential equation is:

X²y'' - 3xy' + 3y = 12x⁴

The homogeneous equation corresponding to this is:

X²y'' - 3xy' + 3y = 0

Let the solution of the given differential equation be of the form:

y = u₁x + u₂x³

Substitute this in the given differential equation to get:

u₁''x³ + 6u₁'x² + u₂''x⁶ + 18u₂'x⁴ - 3u₁'x - 9u₂'x³ + 3u₁x + 3u₂x³ = 12x⁴

The coefficients of x³ are 0 on both sides.

The coefficients of x² are also 0 on both sides. Hence, the coefficients of x, x⁴ and constants can be equated to get the values of u₁' and u₂'.

3u₁'x + 3u₂'x³ = 03u₁' + 9u₂'x² = 12x⁴u₁' = 4x³u₂' = -x

Substitute these values in the equation for y to get:

y = 2x⁴ - x² + c₁x + c₂x³

This is the general solution of the given differential equation.

To know more about differential equation visit:

https://brainly.com/question/25731911

#SPJ11

We are supposed to fill up the table of values for the trig functions. Given below is the complete table of trigonometric ratios :AngleSin(θ)Cos(θ)Tan(θ)csc(θ)sec(θ)cot(θ)0°0DNE0DNE1DNE30°12√32DNE2√32√3DNE45°12√22√2DNE1√2DNE60°√32.12DNE2DNE√32√3DNE90°1

DNE0DNEDNE1DNE

Here is the table of trigonometric ratios :Thus, the trigonometric ratios for the given angle have been computed and tabulated above.

To know more about  trig functions visit:

https://brainly.com/question/30998828

#SPJ11

The area of the paperboard that remains is 613.92 square inches.

To find the area of the paperboard that remains after a semicircle is cut out, we need to calculate the area of the rectangular paperboard and subtract the area of the semicircle.

The rectangular paperboard has dimensions of 35 inches long and 24 inches wide. Therefore, the area of the rectangular paperboard is:

Area_rectangular = length * width = 35 in * 24 in = 840 in²

Now, let's calculate the area of the semicircle. The semicircle is cut out of the rectangular paperboard, and the diameter of the semicircle is equal to the width of the rectangular paperboard (24 inches).

The formula to calculate the area of a semicircle is:

Area semicircle = (π * r²) / 2

where r is the radius of the semicircle.

Since the diameter of the semicircle is 24 inches, the radius is half of that, which is 12 inches.

Plugging in the values into the formula, we get:

Area_semicircle = (3.14 * 12²) / 2 = (3.14 * 144) / 2 = 226.08 in²

Finally, to find the area of the paperboard that remains, we subtract the area of the semicircle from the area of the rectangular paperboard:

Area remaining = Area rectangular - Area semicircle = 840 in² - 226.08 in² = 613.92 in²

Therefore, the area of the paperboard that remains is 613.92 square inches.

For more questions on area

https://brainly.com/question/25292087

#SPJ8

The most specific name for the figure is an isosceles trapezoid

From the question, we have the following parameters that can be used in our computation:

The figure

The properties of the given figure are

Using the above as a guide, we have the following:

The figure is a trapezoid

Because the nonparallel sides are congruent, then the most specific name for the figure is an isosceles trapezoid

Read more about trapezoid at

https://brainly.com/question/1463152

#SPJ1

Expression (C) 7C2 * (1/6)^2 * (5/6)^5 d. (1/6)^2 * (5/6)^5 represents the probability of rolling a 4 exactly 2 times.

Thuy rolls a number cube 7 times.

The probability of rolling a 4 exactly 2 times can be represented by the expression 7C2 * (1/6)^2 * (5/6)^5.

Therefore, option C is the correct answer.

Probability is a measure of the likelihood of an event occurring.

It is expressed as a number between 0 and 1, with 0 representing an impossible event and 1 representing a certain event.

Probabilities are calculated by dividing the number of favorable outcomes by the total number of possible outcomes.

In this case, Thuy rolls a number cube 7 times, and we need to calculate the probability of rolling a 4 exactly 2 times.

To find the probability of rolling a 4 exactly 2 times, we can use the binomial probability formula:

nCx * p^x * q^(n-x), where n is the number of trials, x is the number of successes, p is the probability of success, q is the probability of failure, and nCx is the number of combinations of x objects taken from a set of n objects.

Using this formula, we can see that the probability of rolling a 4 exactly 2 times is:

7C2 * (1/6)^2 * (5/6)^5= (7!)/(2!(7-2)!) * (1/6)^2 * (5/6)^5= (7*6)/(2*1) * (1/36) * (3125/7776)= 21 * (1/1296) * (3125/7776)= 0.2379 (rounded to 4 decimal places)

Therefore, option C is the correct answer: 7C2 * (1/6)^2 * (5/6)^5.

Know more about probability here:

https://brainly.com/question/25839839

#SPJ11

Given the equation, 4 sin x + 9 cos y = 9, we need to find the slope of the line that is normal to this curve at the point (0, π/2).To find the slope of the line normal to the curve, we need to find the derivative of the given curve, and then evaluate it at the point of interest, (0, π/2).4 sin x + 9 cos y = 9

Differentiating the given equation partially w.r.t. x, we get,4 cos x + 0 = 0 ⇒ cos x = 0 ⇒ x = π/2 (since we are interested only in the point where x = 0)Differentiating the given equation partially w.r.t. y, we get,0 + 9 sin y dy/dx = 0 ⇒ dy/dx = 0 (since sin y ≠ 0 at y = π/2)Therefore, the slope of the line normal to the given curve at the point (0, π/2) is zero. Answer: 0 (zero).

To know more about slope visit:

https://brainly.com/question/3605446

#SPJ11

The minimum bid is the lowest value from a group of values. To estimate the minimum bid's distribution and expected value, the following steps should be followed:

Step 1: Place "Mean" and "Std Dev" in column A in rows 1 and 2, respectively, and their corresponding values in column B. Place the column headers "Bid 1", "Bid 2", and so on out to "Bid 10" in cells C1, D1, and so on out to L1, respectively.

Step 2: To generate random numbers for the first bid, in the cells in the "Bid 1" column, enter the formula =NORM.INV( $$$$) in the cells in column C below C1. This formula specifies that the random values should be picked from a normal distribution with a mean of 3.3 million and a standard deviation of 0.27 million. To calculate random values for other bids, enter the same formula in the cells of columns D through L.

Step 3: Determine the winner bid by entering the column header "Winner" in cell M1, and entering the formula =MIN() in cell M2. This formula specifies that the minimum value among the bids in the first row should be calculated. To calculate the winning bid for the other rows, the same formula should be entered in cells M3 through M100.

To know more about Normal distribution:

https://brainly.com/question/15103234

#SPJ11

The p-value associated with a z-score is 0.1896.

To determine the test statistic for this hypothesis test, we need to calculate the z-score using the sample proportion and the null hypothesis proportion.

The sample proportion is calculated by dividing the number of successful observations by the sample size:

Sample proportion (p) = 226/655 ≈ 0.344

The null hypothesis proportion is given as Hp = 0.32.

The test statistic formula for this test is:

z = (p - Hp) / sqrt(Hp * (1 - Hp) / n)

Substituting the values into the formula:

z = (0.344 - 0.32) / sqrt(0.32 * (1 - 0.32) / 655)

Calculating the test statistic:

z ≈ 1.310 (rounded to three decimal places)

To find the p-value for this sample, we need to determine the probability of observing a test statistic as extreme or more extreme than the calculated z-score under the null hypothesis. This is done by looking up the z-score in the standard normal distribution table or using statistical software.

The p-value associated with a z-score of 1.310 is approximately 0.1896 (rounded to four decimal places).

Since the p-value (0.1896) is greater than the significance level (0.02), we fail to reject the null hypothesis.

The final conclusion is that there is not sufficient evidence to warrant rejection of the claim that the population proportion is not equal to 0.32.

To know more about hypothesis refer here:

https://brainly.com/question/29576929?#

#SPJ11

Researchers often make no effort to manipulate or control variables when they engage in exploratory research. In exploratory research, researchers aim to gather information and insight into a topic or problem. The purpose of exploratory research is to develop a better understanding of the topic or problem.

Since the goal of exploratory research is to explore and gather information, researchers typically do not manipulate or control variables. Instead, they aim to collect as much data as possible to develop an initial understanding of the topic or problem. This data can be gathered through a variety of methods, including surveys, interviews, and observations.

It's important to note that exploratory research is just one type of research, and other research methods may involve more manipulation and control of variables. For example, experimental research involves manipulating variables to test cause-and-effect relationships. Overall, the choice of research method depends on the research question, the available resources, and the desired outcomes of the study.

To know more about variables visit:-

https://brainly.com/question/29583350

#SPJ11

Given,25 cm g 47⁰ x 19 Ø x 66 35 cm 145 G B 19° U 0 9. 15cm x 24cm x (270 || You 27cmTo find the missing angles in the above figure, first let's name the angles.

Let's name the angle at point G as x, angle at B as y, angle at U as z and angle at the bottom right corner as w

.In the ΔGCB,x + y + 47 = 180°

y = 180 - x - 47

y = 133 - x ......(1)

In the ΔBCU,y + z + 19 = 180°

z = 180 - y - 19z

= 61 - y .......(2)

In the ΔGUB,x + z + w = 180°

Substituting equations (1) and (2) in the above equation,

we get x + 61 - y + w = 180°

x - y + w = 119 - z

= 119 - (61 - y)x - y + w = 58 + y

x + w = 58 + 2y

x = 58 + 2y - w

x = (58 + 2y - w) / 27

The value of x is 37°, y is 96°, z is 65° and w is 82°.

Hence, the missing angles are 37°, 96°, 65° and 82°.

To know more about trigonometry visit :-

https://brainly.com/question/13729598

#SPJ11

The probability values are

From the question, we have the following parameters that can be used in our computation:

Sample, n = 500

x = 5

So, the probabilty a selected bag is defective is

p = 5/500

p = 1/100

So, the required probability is

P = 5/500 * 4/499

Evaluate

P = 0.0000802

This is the same as (a) above

So, we have

P = 5/500 * 4/499

Evaluate

P = 0.0000802

This is the complement of the probability above

So, we have

Q = 1 - P

This gives

Q = 1 - 0.0000802

Evaluate

Q = 0.9999198

Hence, the probability is 0.9999198

Read more about probability at

https://brainly.com/question/31649379

#SPJ4

Question

A box of 500 plastic bags for frozen fishes contains 5 that are defective. Two plastic bags are selected, at random, without replacement, from the box.

(i) What is the probability that the second one selected is defective given that the first one was defective?

(ii) What is the probability that both are defective?

(iii) What is the probability that both are acceptable?

Therefore, the volume of the solid enclosed by the paraboloids z=25(x² + y²) and z=8−25(x²+ y²) is 128/15π.

The volume of the solid enclosed by the paraboloids z=25(x²+ y²) and z=8−25(x²+ y²) is given by the double integral with respect to x and y as follows;

Here, we have two paraboloids which intersect each other at a certain point. These paraboloids can be seen in the figure below:

The point of intersection between the paraboloids is found by equating the two z functions and solving for x and y.

Thus, 25(x²+ y²) = 8−25(x²+ y²)50(x²+ y²)

= 8y²

= 8/42/5

= 4/5x²

= 4/5

Then, the point of intersection is at (x,y) = (2/√5,0).

In order to find the volume, we need to determine the bounds of integration.

Since the paraboloids are symmetric with respect to the x and y axes, we can find the volume in the first quadrant and multiply by four.

The bounds of integration for x and y are given by;

x : 0 → 2/√5y : 0 → √(4/5 − x²)

Now, we can evaluate the double integral as follows;

∫∫R (25(x²+ y²) − (8−25(x²+ y²))) dA∫0^(2/√5) ∫0^(√(4/5 − x²)) (50x² + 50y² − 8) dy dx∫0^(2/√5) (50x^2y + (50/3)y³ − 8y)|_0^(√(4/5 − x²)) dx∫0^(2/√5) (50x²√(4/5 − x²) + (50/3)(4/5 − x²)^(3/2) − 8√(4/5 − x²)) dx

= 128/15π

To know more about paraboloids visit:

https://brainly.com/question/30882626

#SPJ11

Answer : a. The marginal density of X is f(x) = 2x + 1/2b)

               b.conditional density of Y given that X = 1/4 = 1/2+y for 0

Explanation :

Given, the joint probability density of X and Y is: f(x,y) = (2x+y) for 0 < x < 1, 0 < y < 1a)

Marginal density of X:

We can find the marginal probability density function of X by integrating the joint probability density function f(x,y) over all possible values of Y.f(x) = ∫f(x,y)dy

Here,f(x) = ∫0 to 1 (2x+y) dy = 2x + 1/2

Therefore, the marginal density of X is f(x) = 2x + 1/2b)

a) Marginal density of X : The marginal density of X is given by integrating the joint density function of X and Y with respect to Y over the whole range of Y.

Thus,marginal density of X = ∫f(x,y)dy from -∞ to +∞marginal density of X = ∫[2x+y] dy from -∞ to +∞

Here, the limits of integration for Y are -∞ and +∞. Integrating with respect to Y gives us,marginal density of X = [2x(y)] evaluated from -∞ to +∞marginal density of X = [2x(+∞) - 2x(-∞)]

marginal density of X = ∞ for all values of x

b) Conditional density of Y given that X-1/4

The conditional density of Y given that X = x is given by dividing the joint density function by the marginal density of X and then setting X = x. Thus,conditional density of Y given that X = x = f(x,y)/fX(x)

conditional density of Y given that X = 1/4 = f(1/4,y)/fX(1/4)

Substituting the given values in the above equation, we get,conditional density of Y given that X = 1/4 = [2(1/4)+y]/∞
conditional density of Y given that X = 1/4 = 1/2+y for 0

Learn more about joint probability here https://brainly.com/question/32099581

#SPJ11