H2S gas is removed from the system at
equilibrium below. How does the
system adjust to reestablish
equilibrium?
NH4HS(s) NH3(g) + H₂S(g)

H2S Gas Is Removed From The System Atequilibrium Below. How Does Thesystem Adjust To Reestablishequilibrium?NH4HS(s)

Answers

Answer 1

There will be a decrease in the concentration of[tex]NH_4HS[/tex](s) as the reactant. Therefore, the forward reaction is favored by the system to compensate for the removal of[tex]H_2S[/tex] gas.

[tex]H_2S[/tex] gas is removed from the system at equilibrium. How does the system adjust to reestablish equilibrium?The chemical reaction is:

[tex]NH_4HS(s)[/tex] ⇌ [tex]NH_3[/tex](g) + [tex]H_2S[/tex](g)When the [tex]H_2S[/tex]

gas is removed from the system at equilibrium, the equilibrium shifts to the right-hand side to compensate for the loss. Since the H2S gas is one of the products, the forward reaction will be favored to compensate for the removal of [tex]H_2S[/tex] gas. In other words, to reestablish the equilibrium, the equilibrium shifts to the right side to produce more[tex]H_2S[/tex] gas in the forward reaction. The shift of equilibrium to the right side would result in an increase in the concentration of [tex]NH_3[/tex](g) and [tex]H_2S[/tex](g).

For more question concentration

https://brainly.com/question/28564792

#SPJ8


Related Questions

The system below was at equilibrium in a
9.0 L container. What change will occur
for the system when the container is
shrunk to 3.0 L?
51.8 kJ + H₂(g) + 1₂(g) = 2HI(g)

Answers

The change that wilL occur is that the the reaction shifts to the right (products) to produce fewer moles of gas.

option C is correct.

How do we determine?

The balanced equation is:

[tex]51.8 kJ + H_2(g) + 12(g) = 2HI(g)[/tex]

From the left, there are 1 mole of H2 gas and 1 mole of I2 gas, which gives a total of 2 moles of gas.

In the right,  there are 2 moles of HI gas.

We can tell that there are more moles of gas on the left side than on the right side by comparing the amount of moles on each side.

According to Le Chatelier's principle, a decrease in volume will favor the side with fewer moles of gas.

In our scenario, the reaction will shift to the right  to produce fewer moles of gas.

Learn more about the Le Chatelier's principle at:

https://brainly.com/question/2943338

#SPJ1

Answer:

there is no change

Explanation:

acellus correct

the system that enables you to interact with your computer

Answers

The system that enables you to interact with your computer is commonly referred to as the user interface (UI).

The user interface encompasses the software and hardware components that allow users to communicate and interact with the computer system. It provides a means for users to input commands, receive feedback, and navigate through various applications and functions.

There are different types of user interfaces, including graphical user interfaces (GUIs) that use visual elements such as windows, icons, and menus, as well as command-line interfaces (CLIs) that rely on text-based commands.

Other interfaces, such as touchscreens, voice recognition, and gesture-based interfaces, have also become prevalent in modern computing systems, enhancing the ways in which users can interact with their computers.

To know more about user interface refer here :    

https://brainly.com/question/32269594#

#SPJ11                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

The incomplete table below shows selected characteristics of gas laws.

Name
Variables
Constants
Equation
?
?
?
PV = k
Charles’s law
?
?
V = kT
?
Temperature, pressure
?
P = kT
Combined gas law
Pressure, temperature, volume
?
?

Which constants would most likely be filled in the first row of the table?
temperature and moles of gas
volume and temperature
pressure and volume
pressure and moles of gas

Answers

In the first row of the table, the most likely constants to be filled would be pressure and volume.

In the gas law equation PV = k, where P represents pressure and V represents volume, the constant (k) represents a proportionality factor. The equation states that the product of pressure and volume for a given amount of gas remains constant, provided that the temperature and the number of moles of gas are held constant. Therefore, pressure and volume are the variables being directly related, and they would require constants to establish their relationship.

The gas laws describe the behavior of gases under different conditions, and the constants in the equations help define the relationship between the variables. In Charles's law, the relationship between volume and temperature is described by the equation V = kT, where V represents volume, T represents temperature, and k is a constant. This equation states that at a constant pressure and with a fixed amount of gas, the volume of the gas is directly proportional to its temperature.

In the combined gas law, which combines Boyle's law, Charles's law, and Gay-Lussac's law, the equation involves the variables of pressure, volume, and temperature. The constants in this equation are not specified in the table and would depend on the specific conditions of the gas being analyzed.

Therefore, based on the information provided, the constants that would most likely be filled in the first row of the table are pressure and volume, as they correspond to the equation PV = k.

for such more questions on volume

https://brainly.com/question/29796637

#SPJ8

an isotope undergoes radioactive decay the new isotope that forms

Answers

When an isotope undergoes radioactive decay, the new isotope that forms is determined by the emission of particles from the nucleus.

During radioactive decay, the unstable nucleus of an atom breaks down, emitting radiation and creating a new isotope. This can occur through several processes, including alpha decay, beta decay, and gamma decay.

Alpha decay is the process where an alpha particle is emitted from the nucleus of an atom, decreasing the atomic number by two and the atomic mass by four. Beta decay is the process where a beta particle, which is either an electron or a positron, is emitted from the nucleus of an atom, changing a neutron into a proton or a proton into a neutron, respectively.

Gamma decay is the emission of high-energy electromagnetic radiation from a nucleus, usually accompanying alpha or beta decay.

The new isotope that forms after radioactive decay will have a different atomic number and atomic mass than the original isotope. This new isotope may also be unstable and undergo further radioactive decay, creating yet another new isotope.

To learn more about isotope, refer below:

https://brainly.com/question/28039996

#SPJ11

Current is applied to an aqueous solution of calcium iodide. What is produced at the cathode? What is produced at the anode?

Answers

During electrolysis of an aqueous solution of calcium iodide, calcium metal is produced at the cathode, and iodine gas is produced at the anode.

When current is applied to an aqueous solution of calcium iodide (CaI₂) and electrolysis occurs, the following reactions take place at the cathode and the anode:

At the cathode (negative electrode):

Calcium ions (Ca²⁺) are reduced to calcium metal (Ca) as follows:

Ca²⁺(aq) + 2e⁻ → Ca(s)

So, at the cathode, calcium metal is produced.

At the anode (positive electrode):

Iodide ions (I⁻) are oxidized to iodine gas (I₂) as follows:

2I⁻(aq) → I₂(g) + 2e⁻

Thus, at the anode, iodine gas is produced.

To know more about electrolysis, refer:

https://brainly.com/question/30214797

#SPJ4

if 2a2,7b5 is divisible by 99, for digits a and b, what is the value of 10a b?

Answers

The value of 10a b is 102. This is obtained by finding the values of a and b that make the numbers 2a2,7b5 divisible by both 9 and 11, which are a = 1 and b = 2.

To determine if the number 2a2,7b5 is divisible by 99, we can check if the sum of its digits is divisible by 9 and if the last two digits are divisible by 11.

Sum of digits:

2 + a + 2 + 7 + b + 5 = 16 + a + b

For the number to be divisible by 9, the sum of its digits must be divisible by 9. Hence, 16 + a + b must be divisible by 9.

Checking divisibility by 11:

For the number to be divisible by 11, the difference between the sum of the odd-placed digits and the sum of the even-placed digits must be divisible by 11. In this case, the sum of odd-placed digits is 2 + 2 + 5 = 9, and the sum of even-placed digits is a + 7 + b.

Since the number is divisible by 99, it is also divisible by both 9 and 11. So, we have the following conditions:

16 + a + b is divisible by 9.

(a + 7 + b) - 9 is divisible by 11.

To find the value of 10a b, we need to determine the values of a and b that satisfy these conditions.

Considering the first condition, if 16 + a + b is divisible by 9, the possible values for a and b that make it divisible are a = 1 and b = 2, as a + b = 3.

Now, considering the second condition, if (a + 7 + b) - 9 is divisible by 11, the values of a = 1 and b = 2 also satisfy this condition, as (1 + 7 + 2) - 9 = 1, which is divisible by 11.

Therefore, the value of 10a b is 102.

learn more about divisible here:

https://brainly.com/question/9075582

#SPJ11

1. Which statement about enzymes is incorrect? *
A. Enzymes can speed up or slow down a chemical reaction.
B. Enzymes are not consumed during the reaction in which they are involved.
C. Enzymes are proteins capable of lowering activation energy.
D. There are enzymes that interact with one enantiomer but not the other.

Answers

There are enzymes that interact with one enantiomer but not the other is incorrect. The interaction of some enzymes with one enantiomer but not the other.

Enzymes are proteins that are capable of lowering the activation energy and speeding up or slowing down a chemical reaction. It means that enzymes do not alter the energy of the reactants and products of the reaction; they only affect the activation energy. The enzymes are not consumed during the reaction in which they are involved, and they remain the same after the reaction.

Therefore, they can be used over and over again to catalyze the same reaction. Enzymes are stereospecific, meaning they can interact with specific stereoisomers of a compound. There are enzymes that interact with one enantiomer but not the other, which is incorrect because enzymes interact with specific enantiomers of a compound. Enzymes are stereospecific, meaning they can interact with specific stereoisomers of a compound.

The incorrect statement about enzymes is option D. There are enzymes that interact with one enantiomer but not the other. Enzymes are not consumed during a reaction, and they are proteins that can speed up or slow down chemical reactions by lowering the activation energy.

To know more about enantiomer, visit:

https://brainly.com/question/13265194

#SPJ11

centrifuges used for biohazardous materials must be covered primarily to avoid _____.

Answers

Centrifuges used for biohazardous materials must be covered primarily to avoid the release of potentially harmful aerosols.

During the centrifugation process, the high-speed rotation of the centrifuge causes the contents inside the tubes to experience significant forces. In the case of biohazardous materials, such as infectious agents or biological samples, there is a risk that these materials could become aerosolized or released into the air if the centrifuge is not covered.

Covering the centrifuge helps to contain any potential aerosols or splashes that may occur during centrifugation. It acts as a physical barrier that prevents the biohazardous materials from being dispersed into the surrounding environment. This is important for maintaining the safety of laboratory personnel and preventing the spread of contaminants.

The cover of the centrifuge also provides protection against potential accidents or breakage of the centrifuge tubes. It helps to prevent the release of the biohazardous materials in the event of tube breakage or leakage, further ensuring the containment of the hazardous substances.

By using a covered centrifuge, laboratories can adhere to biosafety guidelines and minimize the risk of exposure to biohazardous materials. It is an essential precautionary measure in handling and processing biohazardous substances to protect both the laboratory personnel and the surrounding environment.

To know more about biohazardous here

https://brainly.com/question/6673763

#SPJ4

The calculation and a brife discribe thank you so much
Malvern laser particle size analyser data
Size um 0.01 0.02 3.9 7.8 15.6 31 63 125 250 500 1000 2000
% Passing 0 0.1 4.75 7.09 9.4 11.92 15.98 21.12 46.13 85.57 99.18 100

Calculate the following statistics on the two particle size distribution curves:
a. D₆₀
b. D₁₀
c. D₃₀
d. Uniformity coefficient (Cu)
e. Coefficient of curvature (Cz)

About the grading of the material and the likely engineering geological behaviour of the soil, based on the particle size distribution. You should refer to the soil classification lecture where the criteria for differentiation fine-grained soils from coarse-grained soils was introduced. You should comment on the different methods used in the analyses and discuss the reasons for any differences between the curves you have generated

Answers

Based on the data provided, (a) 31 μm ; (b) 0.02 μm ; (c) 7.8 μm ; (d) 1550 ; (e) 123.98 ; we can analyze the grading of the material on the basis of Fine-Grained Soils vs. Coarse-Grained Soils and discuss its engineering geological behaviour.

To calculate the required statistics and analyze the particle size distribution, we will use the given Malvern laser particle size analyzer data:

Size (um): 0.01 0.02 3.9 7.8 15.6 31 63 125 250 500 1000 2000

% Passing: 0 0.1 4.75 7.09 9.4 11.92 15.98 21.12 46.13 85.57 99.18 100

a. D₆₀ (Median Diameter):

D₆₀ is the particle size at which 60% of the sample is finer. To calculate D₆₀, we need to find the size corresponding to the cumulative percentage of 60% passing.

D₆₀ = 31 μm (the size where the cumulative percentage is closest to 60%)

b. D₁₀ (10% Passing Diameter):

D₁₀ represents the particle size at which 10% of the sample is finer. We need to find the size corresponding to the cumulative percentage of 10% passing.

D₁₀ = 0.02 μm (the size where the cumulative percentage is closest to 10%)

c. D₃₀ (30% Passing Diameter):

D₃₀ is the particle size at which 30% of the sample is finer. We need to find the size corresponding to the cumulative percentage of 30% passing.

D₃₀ = 7.8 μm (the size where the cumulative percentage is closest to 30%)

d. Uniformity Coefficient (Cu):

The uniformity coefficient is calculated by dividing D₆₀ by D₁₀.

Cu = D₆₀ / D₁₀ = 31 μm / 0.02 μm = 1550

e. Coefficient of Curvature (Cz):

The coefficient of curvature is calculated by dividing the square of D₆₀ by the product of D₁₀ and D₃₀.

Cz = (D₆₀)^2 / (D₁₀ * D₃₀) = (31 μm)^2 / (0.02 μm * 7.8 μm) ≈ 123.98

Based on the particle size distribution and the calculated statistics, we can analyze the grading of the material and discuss its engineering geological behavior:

Fine-Grained Soils vs. Coarse-Grained Soils:

By referring to the soil classification lecture, we can differentiate fine-grained soils from coarse-grained soils based on the particle size distribution. Fine-grained soils typically include clay and silt, while coarse-grained soils include sand and gravel.

In this case, the particle size distribution does not contain any data points indicating the presence of coarse-grained soils (e.g., sand and gravel). The sizes listed in the data range from 0.01 μm to 2000 μm, which indicates that the material consists of fine-grained particles (clay, silt, and possibly fine sand).

Engineering Geological Behavior:

The particle size distribution provides insights into the engineering geological behavior of the soil. Fine-grained soils generally have different characteristics compared to coarse-grained soils.

Fine-grained soils:Clay: The presence of very fine particles (e.g., <2 μm) can indicate the presence of clay. Clay soils tend to have high plasticity, high compressibility, and low permeability. They may exhibit significant settlement and have poor drainage characteristics.Silt: The presence of particles in the range of a few micrometers (e.g., 2-50 μm) suggests the presence of silt

Thus, the required answers are described above.

To learn more about fine grained soil :

https://brainly.com/question/27542425

#SPJ11

suppose a researcher begins with 100 g of liquid and follows paths 4-5 and 6-7. compared to segment 4-5, the researcher would observe that segment 6-7 has a:

Answers

The researcher would observe that segment 6-7 has high pressure compared to other segment in question.

As per the ide gas law, the pressure volume and temperature are related to each other as per the following formula -

PV = nRT, where P is pressure, V is volume, n is number of moles, R is gas constant and T is temperature.

As we see, Pressure is inversely proportional to volume and directly proportional to temperature. Now, in the graph the segment 6-7 exhibits lowers volume and higher temperature compared to segment 4-5.

Since pressure increases with increase in temperature and decrease in volume, we can relate this inference with the observation in graph. Hence, the segment 6-7 with lower volume and higher temperature will have higher pressure.

Learn more about pressure -

https://brainly.com/question/20348074

#SPJ4

8 Which photon carries more energy and how much more for average blue photon (450-495 nm) compared to average orange (590-620 nm) A orange ∼30% B orange 40% C) blue ∼50% D blue 20% 9 Previous problem and the law used to solve it suggests that energy is which was also found for which is always proportional to the of an

Answers

The photon that carries more energy is the blue photon, and it carries around 50% more energy than the average orange photon (590-620 nm). The law used to solve the previous problem suggests that energy is proportional to the frequency of an electromagnetic wave. Thus, the higher the frequency, the higher the energy. The correct option is C.

In electromagnetic radiation, the energy carried by each photon is directly proportional to the frequency and inversely proportional to the wavelength. Thus, higher frequency photons carry more energy than lower frequency photons.

A photon's energy is directly proportional to its frequency and inversely proportional to its wavelength. Thus, higher frequency photons, such as blue photons, carry more energy than lower frequency photons, such as orange photons. The energy of a photon is given by the equation: E = hf

Where E is energy, h is Planck's constant (6.63 x 10⁻³⁴ J s), and f is frequency.

To know more about photon, refer to the link below:

https://brainly.com/question/33017722#

#SPJ11

buffers are chemicals that do all of the following excepta) A solution that contains both a weak acid and its conjugate base
b) A solution that regulates pH because it is such a strong acid or base
c) A solution that resists a change in pH when a base is added
d) A solution that resists a change in pH when an acid is added
e) All of the above are true.

Answers

The correct answer is (b) A solution that regulates pH because it is such a strong acid or base.

Buffers are solutions that resist changes in pH when small amounts of acid or base are added. They consist of a weak acid and its conjugate base or a weak base and its conjugate acid. The weak acid/base component of the buffer system reacts with added acid/base, helping to maintain the pH within a specific range.

Option (b) states that buffers regulate pH because they are such strong acids or bases, which is incorrect. Buffers work through the equilibrium between the weak acid and its conjugate base or weak base and its conjugate acid, not by being strong acids or bases themselves.

Therefore, the correct answer is (b) A solution that regulates pH because it is such a strong acid or base.

Learn more about Conjugate bases and acids from the link given below.

https://brainly.com/question/31229565

#SPJ4

Determine how many electrons are either produced or consumed by completing and balancing the following half-reaction in either an acidic or a basic solution. SO2(g) + 30% - (aq) Select the correct answer below: Two electrons are consumed. Two electrons are produced. os Four electrons are consumed Four electrons are produced,

Answers

Two electrons are produced or consumed.

To determine the number of electrons produced or consumed in the given half-reaction, we need to balance the equation. Let's consider both acidic and basic solutions:

Step 1: Write the half-reaction

The given half-reaction is:

SO2(g) → SO3^(2-) (aq)

Step 2: Balance the atoms

Start by balancing the atoms except for hydrogen and oxygen. In this case, sulfur is already balanced.

SO2(g) → SO3^(2-)

Step 3: Balance the oxygen atoms

To balance the oxygen atoms, add water molecules (H2O) to the side that lacks oxygen. In acidic solution, add water molecules on the right-hand side.

SO2(g) → SO3^(2-) + H2O

Step 4: Balance the hydrogen atoms

In an acidic solution, balance the hydrogen atoms by adding hydrogen ions (H+). In a basic solution, add hydroxide ions (OH-) to balance the hydrogen atoms.

Acidic solution:

SO2(g) + H2O → SO3^(2-) + H+

Basic solution:

SO2(g) + H2O → SO3^(2-) + OH-

Step 5: Balance the charges

Add electrons (e-) to balance the charges on each side of the equation.

Acidic solution:

SO2(g) + H2O → SO3^(2-) + H+ + 2e-

Basic solution:

SO2(g) + H2O → SO3^(2-) + OH- + 2e-

Step 6: Determine the number of electrons

From the balanced equation, we can see that in both acidic and basic solutions, 2 electrons are produced or consumed in the half-reaction.

Therefore, the correct answer is: Two electrons are produced or consumed.

Learn more about  electrons from the given link: https://brainly.com/question/12001116

#SPJ11

experts recommend reducing sodium intake to no more than ________ per day.

Answers

Experts recommend reducing sodium intake to no more than 2,300 milligrams per day for most adults.

Reducing sodium intake is an important dietary recommendation for promoting overall health and preventing various health conditions. Excessive sodium intake has been linked to an increased risk of high blood pressure, heart disease, stroke, and other cardiovascular problems.

The recommended daily limit for sodium intake is typically set at 2,300 milligrams (mg) for most adults. This amount is equivalent to about one teaspoon of salt. However, it's worth noting that individual sodium needs may vary based on factors such as age, overall health, activity level, and specific medical conditions.

For certain populations, such as individuals with hypertension, diabetes, or kidney disease, healthcare professionals often recommend a lower sodium intake of around 1,500 mg per day. These individuals may be more sensitive to the effects of sodium on blood pressure and other health markers, so reducing sodium intake becomes even more crucial for managing their conditions.

To achieve the recommended sodium intake, it is important to be mindful of the sodium content in the foods we consume. Processed and packaged foods, as well as restaurant meals, tend to be higher in sodium. Reading food labels, choosing low-sodium options, and cooking meals at home using fresh ingredients can help control sodium intake.

Sodium is not the only contributor to high blood pressure and cardiovascular problems. A balanced diet that includes plenty of fruits, vegetables, whole grains, lean proteins, and healthy fats, along with regular physical activity, is key to overall heart health.

To know more about sodium here

https://brainly.com/question/18069204

#SPJ4

How many mmol of iron are there in 650 mg of iron? O A. 11.6 mmol Fe B. 363.02 mmol Fe C. 55.85 mmol Fe D. 8.95 mmol Fe

Answers

There are 11.6 mmol of iron in 650 mg of iron.

Given the mass of iron as 650 mg. The molar mass of iron is 55.85 g/mol.

We need to calculate how many millimoles (mmol) are present in the given amount of iron.

We will use the following conversion:

1 g = 1000 mg

1 mol = molar mass in grams

1 mmol = 0.001 mol

Number of moles of iron

= 650 mg ÷ 1000 mg/g

= 0.65 g ÷ 55.85 g/mol

= 0.0116 mol

Number of millimoles of iron

= 0.0116 mol ÷ 0.001 mol/mmolar mass of iron

= 11.6 mmol

Hence, there are 11.6 mmol of iron in 650 mg of iron. Therefore, the correct option is A. 11.6 mmol Fe.

Learn more about the millimoles from the given link-

https://brainly.com/question/30640148

#SPJ11

Acidity is measured in terms of increasing in water. Multiple Choice carbon dioxide molecules, CO
2

oxygen ions, O
2−
carbon atoms, C hydrogen ions, H
+

Answers

Acidity is measured in terms of an increase in hydrogen ions (H+) in water. While carbon dioxide molecules ([tex]CO_2[/tex]), oxygen ions (), and carbon atoms (C) are involved in various chemical processes, only hydrogen ions contribute to determining acidity. The concentration of hydrogen ions in a solution is what is quantified, as their presence in excess leads to a lower pH value. Hence, the correct answer is hydrogen ions, H+.

Acidity is a property that is measured in terms of an increase in hydrogen ions (H+) in water. Hydrogen ions are responsible for the acidic nature of a substance.

In the case of the given multiple-choice options, carbon dioxide molecules ([tex]CO_2[/tex]), oxygen ions (O2-), carbon atoms (C), and hydrogen ions (H+) are all involved in different chemical processes, but only hydrogen ions contribute to measuring acidity.

Carbon dioxide molecules ([tex]CO_2[/tex]) are formed by one carbon atom bonded to two oxygen atoms and are typically associated with the process of respiration in living organisms. Oxygen ions (O2-) are negatively charged ions that are formed when oxygen atoms gain two electrons. Carbon atoms (C) are the fundamental building blocks of organic compounds. Hydrogen ions (H+) are positively charged ions formed when a hydrogen atom loses its electron.

However, when it comes to measuring acidity, it is the concentration of hydrogen ions (H+) in a solution that is quantified. Acidity is determined by the presence of excess hydrogen ions, which lowers the pH value of a solution. Therefore, the correct answer to the multiple-choice question is hydrogen ions, H+.

Therefore, Acidity is measured in terms of an increase in hydrogen ions (H+) in water. While carbon dioxide molecules ([tex]CO_2[/tex]), oxygen ions (O2-), and carbon atoms (C) are involved in various chemical processes, only hydrogen ions contribute to determining acidity. The concentration of hydrogen ions in a solution is what is quantified, as their presence in excess leads to a lower pH value. Hence, the correct answer is hydrogen ions, H+.

Learn more about Acidity

https://brainly.com/question/25148363

#SPJ11

corals supplement the energy they receive from the zooxanthellae by capturing prey with their

Answers

Corals supplement their energy from zooxanthellae by capturing prey with their tentacles. They have stinging cells called nematocysts that immobilize and ingest small organisms, such as zooplankton, to obtain additional nutrients.

Corals have a symbiotic relationship with photosynthetic algae called zooxanthellae, which provide the corals with a significant portion of their energy through photosynthesis. However, this energy source may not be sufficient, especially in nutrient-poor environments. To compensate for this, corals have developed another method to obtain additional nutrients by capturing prey.

Corals possess specialized structures called tentacles that are equipped with stinging cells called nematocysts. When a potential prey item comes into contact with these tentacles, the nematocysts are triggered, releasing a harpoon-like structure that immobilizes the prey. The tentacles then bring the captured organism closer to the coral's mouth, where it is ingested and broken down for nutrients.

This predatory behavior allows corals to supplement their diet and obtain vital nutrients, such as proteins and fats, that may be lacking from the photosynthetic products provided by the zooxanthellae. It helps corals thrive in nutrient-limited environments and maintain their overall health and growth.

learn more about nutrients here:

https://brainly.com/question/31922795

#SPJ11


Determine the change in entropy of 9.00 g of water that
completely evaporates on a hot plate whose temperature is
100°C.




a.

55 J/K




b.

8.03 J/K




c.

0.05 J/K




d.

68.0 J/K

Answers

The change in entropy of 9.00 g of water that completely evaporates on a hot plate at 100°C is 8.03 J/K. The correct option is b.

The change in entropy (∆S) of a substance can be calculated using the equation:

∆S = q/T,

where q is the heat transferred and T is the temperature in Kelvin.

In this case, the water completely evaporates, which means it undergoes a phase change from liquid to gas. The heat transferred (q) during this process is equal to the enthalpy of vaporization (∆Hvap) of water, and the temperature (T) is 100°C.

The enthalpy of vaporization of water is approximately 40.7 kJ/mol. To calculate the heat transferred for 9.00 g of water, we need to convert the mass to moles using the molar mass of water (18.015 g/mol).

moles = mass / molar mass = 9.00 g / 18.015 g/mol = 0.499 mol

Now we can calculate the heat transferred:

q = ∆Hvap * moles = 40.7 kJ/mol * 0.499 mol = 20.30 kJ = 20,300 J

Finally, we substitute the values into the entropy formula:

∆S = q / T = 20,300 J / (100 + 273.15) K = 8.03 J/K

Therefore, the change in entropy of 9.00 g of water that completely evaporates on a hot plate at 100°C is 8.03 J/K. The correct option is b.

To know more about change in entropy, refer here:

https://brainly.com/question/28244712#

#SPJ11

Propane burns in excess oxygen according to the following reaction. C3H8 +502 - 3CO2 +4H2O
a. How many moles each of CO2 and H2O are formed from 3. 85 mol of propane?

Answers

From 3.85 moles of propane, 11.55 moles of carbon dioxide and 15.40 moles of water are formed.

From the balanced equation, we can see that for every 1 mole of propane (C3H8) that reacts, 3 moles of carbon dioxide (CO2) and 4 moles of water (H2O) are formed.

Given that we have 3.85 moles of propane, we can calculate the moles of carbon dioxide and water produced using the mole ratios:

Moles of CO2 = 3.85 mol propane × (3 mol CO2 / 1 mol propane) = 11.55 mol CO2

Moles of H2O = 3.85 mol propane × (4 mol H2O / 1 mol propane) = 15.40 mol H2O

Therefore, from 3.85 moles of propane, 11.55 moles of carbon dioxide and 15.40 moles of water are formed.

learn more about propane here

https://brainly.com/question/14519324

#SPJ11

We also derived the August equation for the saturation vapour pressure of water (in kPa)
sat R T 298
P =3.17e−Lvap(1− 1 ), (3)
where Lvap = 40.8 kJ/mol and R = 8.314J/mol/K. The air in this room has a relative humidity of about 30% and a temperature of 22◦C. What is vapour pressure of the water in the room?

Answers

The vapor pressure of water in the room can be calculated using the August equation and the given values for temperature and relative humidity.

The August equation provides a way to calculate the saturation vapor pressure of water at a given temperature. In this equation, the vapor pressure (P) is determined using the temperature (T), the latent heat of vaporization (Lvap), and the gas constant (R).

Given a relative humidity of 30% and a temperature of 22°C, we can use the August equation to find the vapor pressure of water in the room. First, we convert the temperature to Kelvin by adding 273.15 (22°C + 273.15 = 295.15 K).

Next, we substitute the values into the equation and solve for P. Using Lvap = 40.8 kJ/mol and R = 8.314 J/mol/K, we can plug in the values to calculate the vapor pressure.

The result will give us the vapor pressure of water in the room, indicating the partial pressure of water vapor in the air at the given temperature and relative humidity.

learn more about temperature here:

https://brainly.com/question/17088012

#SPJ11

Find the theoretical density of magnesium given that it has a HCP crystal structure, an atomic weight and atomic radius of 24.31 g/mol and 0.16 nm respectively, and c/a ratio of 1.624.

Answers

The theoretical density of magnesium in its HCP crystal structure is 1.738 g/cm³.

To calculate the theoretical density of magnesium, we need to consider its crystal structure, atomic weight, atomic radius, and the c/a ratio.

In the hexagonal close-packed (HCP) crystal structure, the unit cell consists of three layers of atoms stacked in a close-packed arrangement. The c/a ratio represents the ratio of the height (c-axis) to the basal plane edge length (a-axis) of the unit cell.

First, we calculate the volume of the unit cell. Since the HCP structure has a close-packed arrangement, we can approximate the unit cell as a hexagonal prism. The volume of a hexagonal prism can be calculated using the formula: Volume = (√3/2) * a² * c.

Next, we determine the number of atoms per unit cell. In an HCP structure, there are two atoms in the base plane and one atom on top or bottom. Therefore, the number of atoms per unit cell is 3.

To find the theoretical density, we divide the atomic weight by the volume of the unit cell multiplied by the number of atoms per unit cell.

The final calculation gives us the theoretical density of magnesium in its HCP crystal structure as 1.738 g/cm³.

Learn more about density .

brainly.com/question/29775886

#SPJ11

The electron stable state configuration in atoms is best seen in the _ configuration.

Answers

The electron stable state configuration in atoms is best seen in the ground state configuration. The ground state configuration represents the lowest energy level of an electron within an atom.

It is a state in which the electrons in the atom are arranged in their lowest possible energy levels. The electron stable state configuration in atoms can be visualized using electron configuration diagrams, also known as orbital diagrams. These diagrams depict the arrangement of electrons in their respective energy levels, shells, and subshells.In the ground state configuration, each electron occupies the lowest energy level available to it, with no two electrons having the same set of quantum numbers. The maximum number of electrons that can occupy a given energy level is determined by the formula

2n^2,

where n is the principal quantum number of the energy level. The ground state configuration of an atom can be determined using the Aufbau principle, which states that electrons fill the lowest energy levels first before moving to higher energy levels. It can also be determined using the Pauli exclusion principle, which states that no two electrons in an atom can have the same set of quantum numbers, and Hund's rule, which states that electrons will occupy an empty orbital before pairing up in an orbital. The ground state configuration of an atom is important in understanding the chemical and physical properties of elements, as it affects their reactivity, bonding behavior, and other properties.

For more question electron

https://brainly.com/question/28443862

#SPJ8

what element is responsible for the odor of rotten eggs

Answers

The element responsible for the odor of rotten eggs is sulfur (S),  specifically hydrogen sulfide gas, This gas is released during the breakdown of substances containing sulfur, which is what causes the rotten egg smell.

When organic matter decomposes, particularly those containing proteins or other sulfur-containing compounds, the breakdown process can release hydrogen sulfide gas (H2S). This gas is responsible for the characteristic smell associated with rotten eggs.

Hydrogen sulfide is a colorless gas with a strong, pungent odor resembling that of rotten eggs or sewage. Even at low concentrations, it is highly noticeable due to its distinctive smell, which is detectable by the human nose at very low levels.

The presence of hydrogen sulfide gas often indicates the presence of decaying organic matter, such as in rotten eggs, sewage, or certain natural environments like swamps or hot springs. It is also produced during some industrial processes and can be encountered in certain occupational settings.

While the odor of hydrogen sulfide can be unpleasant, it is important to note that the gas is toxic at high concentrations. Inhalation of high levels of hydrogen sulfide can be harmful to human health, leading to respiratory and neurological effects.

In conclusion, the element responsible for the odor of rotten eggs is sulfur, specifically in the form of hydrogen sulfide gas. This gas is released during the decomposition of sulfur-containing compounds, giving rise to the characteristic smell associated with rotten eggs.

To know more about hydrogen sulfide refer here:

https://brainly.com/question/28501628#

#SPJ11

the process of elimination of soluble metabolic wastes is called

Answers

The process of elimination of soluble metabolic wastes is called excretion.

Excretion plays a crucial role in maintaining homeostasis by removing harmful byproducts of metabolism. One of the key organs involved in excretion is the kidney, which filters the blood and produces urine to eliminate waste products such as urea, creatinine, and excess salts.

Other organs also contribute to excretion, including the lungs, which eliminate carbon dioxide, and the skin, which excretes small amounts of waste products through sweat. Together, these elimination processes help ensure the proper functioning and health of the body by removing waste materials that could otherwise accumulate and cause harm.

Learn more about excretion:

brainly.com/question/32274304

#SPJ4

If two gases are present in a container, the total pressure in the container is equal to
the sum of the pressures that are exerted by each of the two gases.
twice the sum of the pressures that are exerted by the individual gases.
the sum of the pressures that each gas would exert if they occupied twice the volume.
the sum of the pressures that each gas would exert if they occupied half the volume.

Answers

The total pressure in the container is equal to the sum of the pressures that are exerted by each of the two gases.

According to Dalton's law of partial pressures, the total pressure exerted by a mixture of non-reacting gases is equal to the sum of the pressures exerted by each individual gas in the mixture. This is because gases behave independently of each other and their individual pressures are additive.

The presence of one gas does not affect the pressure exerted by another gas in the same container. Therefore, the total pressure is simply the sum of the pressures exerted by each gas.

For example, if gas A exerts a pressure of 10 atm and gas B exerts a pressure of 5 atm, the total pressure in the container would be 10 atm + 5 atm = 15 atm.

It is important to note that the volume occupied by the gases does not affect the total pressure in this scenario. The total pressure depends only on the sum of the individual pressures exerted by each gas.

for such more questions on  pressure

https://brainly.com/question/24719118

#SPJ8

The correct name for an aqueous solution of H2SO4 is Group of answer choices sulfurous acid hydrosulfuric acid none of these sulfuric acid hydrosulfurous acid

Answers

Option D: The correct name for an aqueous solution of H₂SO₄ is sulfuric acid.

One of the most important chemicals in terms of commerce is sulfuric acid, often known as oil of vitriol or hydrogen sulfate (H₂SO₄). It is a dense, colorless, oily liquid that is very caustic. Industrially, sulfuric acid is created when water reacts with sulfur trioxide (see sulfur oxide), which is created chemically by combining oxygen and sulfur dioxide, either through the contact process or the chamber process.

Being a very strong acid, sulfuric acid totally ionizes in aqueous solutions to produce hydrogen sulfate ions (HSO₄) and hydronium ions (H₃O⁺). Hydrogen sulfate ions also dissolve in diluted solutions, producing more hydronium ions and sulfate ions (SO₄²⁻).

To know more about sulfuric acid, refer:

https://brainly.com/question/10220770

#SPJ4

Correct question:

The correct name for an aqueous solution of H2SO4 is Group of answer choices

sulfurous acid

hydrosulfuric acid

none of these

sulfuric acid

hydrosulfurous acid

The quantity of heat from a chemical reaction comes from:
a. The breaking and formation of chemical bonds.
b. The presence of oxygen in the reaction.
c. The emission of radiation.
d. The composition of the fuel-air mix.

Answers

The quantity of heat from a chemical reaction primarily comes from

a. The breaking and formation of chemical bonds.

When a chemical reaction takes place, the bonds between atoms in the reactant molecules are broken, and new bonds are formed to create the products. Breaking bonds requires energy (endothermic process), while forming bonds releases energy (exothermic process). The net energy released or absorbed during these bond-breaking and bond-forming processes determines the heat change of the reaction.

In an exothermic reaction, the energy released from the formation of new bonds is greater than the energy required to break the existing bonds. As a result, heat is released into the surroundings, increasing the temperature of the system. Combustion reactions, such as burning fuel, are examples of exothermic reactions.

On the other hand, in an endothermic reaction, the energy required to break the existing bonds is greater than the energy released during bond formation. Consequently, heat is absorbed from the surroundings, causing a decrease in the system's temperature.

While the presence of oxygen (option b) can be crucial for combustion reactions, it is not the direct source of heat. Oxygen acts as an oxidizing agent and facilitates the combustion process by supporting the breaking and forming of bonds.

Option c, the emission of radiation, can occur during certain chemical reactions, but it is not the primary source of heat. Radiative heat transfer is a secondary mode of heat transfer that can happen alongside convective and conductive heat transfer.

Option d, the composition of the fuel-air mix, can influence the energy released during a reaction but does not directly provide the heat. The composition affects the reactants involved, their bond strengths, and the energy released or absorbed during the reaction.

Thus option a is the correct answer.

Learn more about chemical reaction https://brainly.com/question/11231920

#SPJ11

how many grams of h2 are needed to produce 12.51 g of nh3?

Answers

Total, 18.765 grams of hydrogen gas are needed to produce 12.51 grams of NH₃.

To determine the amount of H₂ needed to produce a given mass of NH₃, we need to use the balanced chemical equation for the reaction between H₂ and NH₃. The balanced equation is:

3H₂ + N₂ → 2NH₃

From the equation, we can see that 3 moles of H₂ react to form 2 moles of NH₃.

Now, we need to calculate the molar masses of H₂ and NH₃;

The molar mass of H₂ is 2 g/mol (1 g/mol for each hydrogen atom).

The molar mass of NH₃ is approximately 17 g/mol (1 g/mol for each hydrogen atom and 14 g/mol for nitrogen).

To find the amount of H₂ needed, we can set up a proportion using the molar ratios from the balanced equation:

(3 mol H₂ / 2 mol NH₃) = (x g H₂ / 12.51 g NH₃)

Cross-multiplying and solving for x (the mass of H₂), we get:

x = (3 mol H₂ / 2 mol NH₃) × (12.51 g NH₃)

x ≈ 18.765 g H₂

Therefore, approximately 18.765 grams of H₂ are needed to produce 12.51 grams of NH₃.

To know more about hydrogen gas here

https://brainly.com/question/14355155

#SPJ4

How do you use the change of base formula and a calculator to evaluate the logarithm

Answers

Using a calculator, find the logarithm of "x" in base "b" can be done by entering logᵦ(x) into the calculator.

To use the change of base formula and a calculator to evaluate a logarithm, you can follow these steps:

Identify the logarithm you want to evaluate. Let's say you have a logarithm in base "a" and want to evaluate it.Determine the desired base for the logarithm. Let's say you want to evaluate the logarithm in base "b".Apply the change of base formula, which states that log base "a" of "x" can be expressed as log base "b" of "x" divided by log base "b" of "a".

Mathematically, it can be written as:

logₐ(x) = logᵦ(x) / logᵦ(a)

Using a calculator, find the logarithm of "x" in base "b". This can be done by entering logᵦ(x) into the calculator.

Find the logarithm of "a" in base "b". Enter logᵦ(a) into the calculator.

Divide the value obtained in step 4 (logᵦ(x)) by the value obtained in step 5 (logᵦ(a)) using the calculator.

Mathematically, it can be written as:

logₐ(x) ≈ logᵦ(x) / logᵦ(a)

The result you obtain from the division is the evaluation of the logarithm in base "a".

Therefore, the required procedure is mentioned above.

To learn more about logarithms :

https://brainly.com/question/30340014

#SPJ11

If the relative humidity is 68% and the vapor pressure is 16 mb, what is the vapor pressure at saturation?

Answer:  Answer in mb

What is the approximate saturation air temperature?

Answer:  Answer in °C

Answers

The vapor pressure at saturation can be calculated by dividing the given vapor pressure by the relative humidity (as a decimal). The approximate saturation air temperature can be determined by finding the corresponding temperature on the saturation vapor pressure curve.

To find the vapor pressure at saturation, divide the given vapor pressure (16 mb) by the relative humidity (68%) expressed as a decimal (0.68). This calculation will yield the vapor pressure at saturation in mb.

To determine the approximate saturation air temperature, refer to the saturation vapor pressure curve. Find the temperature that corresponds to the vapor pressure at saturation obtained in the previous step. This temperature value represents the approximate saturation air temperature in °C.

The vapor pressure at saturation indicates the maximum amount of water vapor that the air can hold at a specific temperature. The saturation air temperature represents the temperature at which the air is fully saturated with water vapor and further cooling could result in condensation or the formation of dew or fog.

learn more about vapor pressure here:

https://brainly.com/question/29640321

#SPJ11

Other Questions
19. Which statement is NOT true about a general partnership;a. all general partners are agents of the partnership;b. all general partners have an equal right to participate in management;c. a corporation can be a general partner;d. there must be a written partnership agreement.20. Tullis and Shivy are physicians who have formed a general partnership. In the event one of them commits malpractice,a. the other is vicariously liable;b. the other is liable to the extent of their contribution in the partnership;c. the other has no liability;d. the other is only liable if stipulated in the partnership agreement.37. A corporation is owned by its:a. directors;b. officers;c. members;d. shareholders;38. Furiya is both a director and an officer of ABC Corporation. She is therefore a(n)__________director.a. inside;b. outside;c. CEO;d. permanent. Explain the concept of compensation and discuss in detail thefactors that affect compensation of employees in industrialorganisations. Search the Internet for a product you want to buy. Are there differences in the prices, shipping charges, or return policies among the different retailers offering the product? From which retailer would you buy? Explain the criteria you would use to make the decisionwrite this question atleast 2 page Determine the number of solutions to acos3xb=0, on the interval 0x Shadee Corp. expects to sell 580 sun visors in May and 340 in June. Each visor sells for $13. Shadee's beginning and ending finished goods inventories for May are 90 and 60 units, respectively. Ending finished goods inventory for June will be 60 units. It expects the following unit sales for the third quarter: July 515August 480September 440Sixty percent of Shadee's sales are cash. Of the credit sales, 52 percent is collected in the month of the sale, 39 percent is collected during the following month, and 9 percent is never collected. Required: Calculate Shadee's total cash receipts for August and September. (Do not round your intermediate calculations. Round your answers to the nearest whole dollar.) The function represents the rate of flow of money in dollars per year. Assume a 10 -year period and find the present valuf(x)=500e0.04xat8%compounded continuously A.$4.121.00B.$20,879.00C.$18,647.81D.$6,147.81 Respond to the following prompt in a minimum of 175 words and at least two paragraphs: 1. What are 2 knowledge areas, process groups, or aspects of project management that stood out to you as opportunities to apply ethical principles to project activities? Identify which PMI standard of ethics you think applies and why. in the traditional approach, each new budget is based on the dollar amounts contained in the budget for the preceding year; however, in a(n) select every expense in every budget must be justified. The graph shows a distribution of data.272.583910What is the standard deviation cO 0.5O 1.5O2.0O 2.5 what is the resolving power with regard to a microscope a _ check is a validity check on data which determines which determines whether a number is within a specified group of numbers what is the relationship between object distance and image height Ms. Therese is working in an Advertising Firm and has been doing a portfolio designing job for the last 3 years. It can also be noted that she is doing well in the job. She is also having a very good relationship with the people in the designing group. However, she is informed by the Executive Manager that she is to be transferred to another area and will work with different group of people after 3 months. She is being transferred because the management sees that she is the only one who can handle the job. However, the transfer is lateral and not promotion. After being informed about it, she is frequently absent from the job and seldom participate the company activities when she is present.1. Evaluate the challenges faced by Ms. Therese in assigning the proper employees that would best fit the job behavior. 2. Give at least two recommendations to cope with her low level of commitments. 3. Adopt Kurt Lewin change model in the above situation and discuss in detail the reason for the change by the Executive Manager. An experimental design use observations of subjects in their natural environment. True False Changing a single amino acid in a protein consisting of 433 amino acids would a.always alter the primary structure of the protein but never alter its tertiary structure or function. b.always alter the primary structure of the protein and sometimes alter its tertiary structure or function c.always alter the primary and tertiary structure of the protein but never alter its function d.sometimes alter the primary and tertiary structure of the protein but always alter its function You purchased 100 shares of Amazon.com common stock on margin at $135 per share. Assume the initial margin is 0.65. You received a margin call when the share price dropped to $95. What is your maintenance margin requirement (MMR)?Suppose you are holding a stock and there are three possible outcomes. The good state happens with 20% probability and 18% return. The neutral state happens with 55% probability and 9% return. The bad state happens with 25% probability and -5% return. What is the standard deviation of return? The employee credit union at State University is planning the allocation of funds for the coming year. The credit union makes four types of loans to its members. In addition, the credit union invests in risk-free securities to stabilize income. The various revenue producing investments, together with annual rates of return, are as follows: The credit union will have $2 million available for investment during the coming year. State laws and credit union policies impose the following restrictions on the composition of the loans and investments: - Risk-free securities may not exceed 30 percent of the total funds available for investment. - Signature loans may not exceed 10 percent of the funds invested in all loans (automobile, furniture, other secured, and signature loans). - Furniture loans plus other secured loans may not exceed the automobile loans. - Other secured loans plus signature loans may not exceed the funds invested in risk-free securities. How should the $2 million be allocated to each of the loan/investment alternatives to maximize total annual return? What is the projected total annual return? An eagle is fying horizontally at a speed of 3.81 m/s when the fish in her talons wiggles loose and falls into the lake 8.4 m below. Calculate the velocity of the fish relative to the water when it hits the water. n/s degrees below the horizontal CASE: DOBBS V. JACKSON WOMENS HEALTH ORGANIZATION. Summary of the Case In one or two paragraphs, provide a general overview of the case that serves as a snapshot of what the case is about and how it ended up in your state high court. A summary is using your words to write a brief history of the case. Do not give your opinion or your interpretation but stick to the facts only. B: Case Outline Your court case outline should include: Title: Name of the case Facts of the case: Provide key facts involving the case. History of the case: What legal action was taken based on what your state laws say about this case? Legal questions: What were the legal issues the court had to decide? Decision or holdings: Did the court decide for the plaintiff or the defendant? Explain the reason behind the decision? Verdict and opinion (judgement): What were the concurring and dissenting opinions? How many judges decided for the defendant and how many justices decided against the defendant? What was the final verdict from the judge or the jury, if it was a jury trial? The average total cost of producing six bagels is:A. $0.10B. $0.15C. $0.20D. $0.80Quantity of Bagels per PeriodTotal Variable CostsTotal Fixed Costs0010120102301033510445105601068010710510813510