Hello please help me with this question

1. Draw the following organic compounds:
a. Propanone


b. Butanoic acid


c. Methyl Propanoate

The group number of a metal is proportional to the amount of charges on an ion that metal forms. The group number less eight determines how often charges are represented on a non-metal ion.

Protons are subtracted from electrons. The simplest method for calculating the charge of the ion is to deduct the quantity of electrons first from number of protons present in the atom.

The type of chemical that emerges from the formation of an ionic link between two ions with opposite charge is known as an ionic compound. When an ion comprises just one class of atom, it is known as an atomic ion or a monoatomic ion.

To know more about metal visit :-

https://brainly.com/question/29404080

#SPJ1

Molarity equals moles times volume.A 0.115M KBr solution needs 350 mL, or 4.79 grams, of KBr.

The following expression can be used to determine a solution's molarity:

Molarity equals moles times volume.

A 0.115M KBr solution in the volume of 350mL was sent in response to this inquiry.

Moles can be counted using the formula below:

mole number = 0.350 0.115

Number of Mole Units: 0.0403 Mol

KBr's molar mass is 39 + 80 = 119 g/mol.

KBr's mass is 119g/mol + 0.0403 mol.

KBr mass equals 4.79g

Therefore, to create 350 mL of a 0.115M KBr solution, 4.79 grams of KBr are needed.

A 0.115M KBr solution needs 350 mL, or 4.79 grams, of KBr.

To learn more about molarity refer

https://brainly.com/question/8596433

#SPJ1

Answer: A solid must undergo a change in temperature or pressure in order to become a liquid. Specifically, it must be heated to its melting point (or above) and/or the pressure on it must be decreased. This process is known as melting.

Explanation:

For the electrochemical cell shown, the necessary concentration of H+ ions for the reaction to be in equilibrium with no transfer of electrons through the external circuit is 1 M.

This is because the standard potential of the Pt/H electrode is 0 volts, and the standard potential of the Pb electrode is -0.13 volts. Since the two half-cells have the same concentration (1 M), the potential difference between them is 0 volts, and thus no net transfer of electrons through the external circuit occurs.

Learn more about electrochemical cell:

https://brainly.com/question/10470515

#SPJ4

The given peptide, amino acid residues likely to be on the solvent exposed surface once the peptide folds into its native conformation are: A, N, R, S, H, V, F, E, and A.

The solvent-exposed surface of a folded protein is composed of amino acid residues with polar or charged side chains. These side chains can interact with the aqueous solvent, whereas nonpolar, or hydrophobic, side chains remain in the interior of the protein. To calculate the relative solvent-exposed surface area of a particular amino acid residue, we use the formula:

SAS = [H-bond acceptor (A) + H-bond donor (D) + polar (P) + charged (C)] / Total number of residues

For example, for the given peptide (I L W A N R M S H V L F A V E A):

L – H-bond acceptor (A): 0 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 0 = 0 / 12 = 0

W – H-bond acceptor (A): 3 + H-bond donor (D): 1 + polar (P): 1 + charged (C): 0 = 5 / 12 = 0.417

A – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 2 / 12 = 0.167

N – H-bond acceptor (A): 2 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 0 = 2 / 12 = 0.167

R – H-bond acceptor (A): 3 + H-bond donor (D): 1 + polar (P): 0 + charged (C): 1 = 5 / 12 = 0.417

M – H-bond acceptor (A): 0 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 0 = 0 / 12 = 0

S – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 1 = 2 / 12 = 0.167

H – H-bond acceptor (A): 2 + H-bond donor (D): 1 + polar (P): 0 + charged (C): 0 = 3 / 12 = 0.25

V – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 2 / 12 = 0.167

L – H-bond acceptor (A): 0 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 0 = 0 / 12 = 0

F – H-bond acceptor (A): 0 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 1 / 12 = 0.083

A – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 2 / 12 = 0.167

V – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 2 / 12 = 0.167

E – H-bond acceptor (A): 2 + H-bond donor (D): 0 + polar (P): 0 + charged (C): 0 = 2 / 12 = 0.167

A – H-bond acceptor (A): 1 + H-bond donor (D): 0 + polar (P): 1 + charged (C): 0 = 2 / 12 = 0.167

Therefore, from the given peptide, amino acid residues likely to be on the solvent exposed surface once the peptide folds into its native conformation are: A, N, R, S, H, V, F, E, and A.

Learn more about amino acid here:

https://brainly.com/question/14583479

#SPJ4

Answer:HESNR

Explanation:

HESNR is the correct answer because they are polar and hydrophilic

The crate slides the distance d,  the new gain in kinetic energy compare to ∆k is that the new gain will be less than delta ∆k.

The force of magnitude = F

An angle = Ф

The surface will exerts the normal force of magnitude = F (N)

The crate slide at distance = d

The less horizontal force =  the less velocity, the less kinetic energy.

Δ K = Fd Cos Ф. If the ΔK decreases

Therefore the ,  new gain will be less than delta ∆k.

The Kinetic energy is the energy of an object  because of its motion. The main component of the kinetic energy are the movement and the moving objects. The Kinetic energy will never present in the object at rest, it present only in the objects that are moving.

This question is incomplete, the complete question is :

a crate is on a horizontal frictionless surface. a force of magnitude F is exerted on the crate at an angle (theta) to the horizontal,  causing the crate to slide to the right. The surface exerts a normal force of magnitude F(N) on the crate. as the crate slides a distance d, it gains an amount of kinetic energy delta K. while f is kept constant, the angle theta is now doubled but is still less than 90 degrees. assume the crate remains in contact with the surface.

as the crate slides a distance d, how does the new gain in kinetic energy compare to ∆k?

To learn more about kinetic energy here

https://brainly.com/question/13328588

#SPJ4

The volume can be achieved till the precision of 0.003 mm.

Precision is defined as the degree to which repeated measurements agree with each other. Significant figures indicate the precision of a measuring tool that was used to measure a value. The more precise the measuring tool, the more precise and accurate the measurements can be.

The length, width and thickness of the plate can be multiplied to get the volume of the plate.

Volume V = Length*Width*Thickness

And using the precision formula,

[tex]\triangle V = \triangle L+\triangle W +\triangle T[/tex]

The precision is for length, width and thickness is, 0.001 mm.

Therefore the precision in volume is, 0.001 + 0.001 + 0.001 = 0.003 mm.

To know more about the precision, here

brainly.com/question/1311561

#SPJ4

Yes, it is accurate to say that atoms are the fundamental units of all matter and the smallest chemical unit with identifiable features.

A particle called an atom has a nucleus made up of protons and neutrons that is encircled by an electron cloud. The smallest component of a substance that cannot be broken down chemically. The atom is the fundamental unit of the chemical elements, and the chemical elements are distinguishable from one another by the number of protons in their atoms. The center of every atom is called the nucleus, and it is made up of protons and neutrons (particles with no charge). The nucleus is filled with electrons, which are negative particles.

Learn more about Atoms

brainly.com/question/13518322

#SPJ4

True. The Balmer series of lines for the hydrogen atom are found only in the visible region of the spectrum.

The Balmer series of lines for the hydrogen atom are found in the visible region of the spectrum because of the specific energy levels that the electrons must be in to emit the visible light that makes up the series [1]. When an electron moves from a higher energy level to a lower energy level, it releases a photon of light with a specific wavelength that is determined by the energy difference between the two levels. This is known as an emission line and the Balmer series is composed of the emission lines that are seen in the visible spectrum.

The Balmer series of lines are the result of electrons transitioning from the n=3 to n=2 energy levels, n=4 to n=2, n=5 to n=2, and n=6 to n=2. Each of these transitions produces a photon of light with a specific wavelength. The exact wavelengths of the Balmer series lines are determined by the Rydberg formula, which uses the atomic mass and the Rydberg constant to calculate the energy levels of the hydrogen atom.

Learn more about The Balmer series of lines:

https://brainly.com/question/15700855

#SPJ4

The density (in g/ml) of the metal 268700 g/m³.

To find the density of the metal, we need to know the mass and volume of the coins. We can calculate the volume of one coin and then multiply by the number of coins to get the total volume.

The volume of one coin can be found using the formula for the volume of a cylinder:

V = π × r² × h

where r is the radius and h is the height (thickness) of the coin.

r = 1.57 inches / 2 = 0.785 inches

h = 0.0787 inches

V = π × 0.785² × 0.0787 = 0.0109 cubic inches

Since 1 cubic inch = 16.387064 cm³, the volume of one coin is 0.0109 × 16.387064 = 0.179 cm³.

The total volume of the 59 coins is 0.179 × 59 = 10.58 cm³.

The mass of the coins is 6.322 lbs = 2834.9 g.

So the density of the metal is:

density = mass / volume

density = 2834.9 g / 10.58 cm³

density = 268.7 g/cm³ = 268700 g/m³

Therefore, the density of the metal is 268700 g/m³

To learn more about density visit: https://brainly.com/question/1354972

#SPJ4

The two reasons the fossil found on vega island is of particular importance to understanding the climate and location of Antarctica millions of years ago are Isotopic composition and Paleoclimate proxies

Isotopic composition: The isotopic composition of rocks and residue in Antarctica can uncover significant hints about past climate and temperature conditions.

For instance, the proportion of isotopes, for example, oxygen and hydrogen can give data about the temperature of the climate when the stone or silt was framed.

This data can be utilized to decide if Antarctica was situated in a warm or cold climate a long period of time prior and how the climate has changed over the long run.

Paleoclimate proxies: Paleoclimate proxies are indirect indicators of past climate conditions and are many times found in silt and rock deposits.

For instance, dust grains can demonstrate the sorts of plants that existed in a specific region and the climate conditions they expected to develop. Essentially, the presence of specific minerals, like calcite or aragonite, can give data about the temperature and saltiness of the water in which they are framed.

By examining these proxies, researchers can recreate past climate conditions in Antarctica and gain a superior comprehension of how the climate has changed after some time.

To learn more about fossils found on vega island:

https://brainly.com/question/6451268

#SPJ4

The number of people (or adults) in the population, N, has an evolutionary equivalent called Ne. whereas N determines the ecological effects of population size simulation,

Evolutionary consequences (rates of genetic diversity loss and increase in inbreeding; relative effectiveness of selection) depend on Ne, and Emergency Medical Care Providers in Critical Access Hospitals and ambulance services across the entire state receive technologically advanced simulation training.Ne=(4*Nm*Nf)/(Nm+Nf) is the formula to get the effective population size. The formula Ne = 4NmNf/(Nm + Nf) can be used to calculate the effective population size in this circumstance, where Nm and Nf are the number of men and females, respectively. demonstrates the connection between Ne and Nf in a population of 1,000 reproducing people simulation.

To learn more about simulation  please click on below link

https://brainly.com/question/28099331

#SPJ4

The chemical symbol for calcium in the periodic table of elements is Ca.  The atomic number of calcium is 20.

Calcite belongs to group 2. The quantity of valence electrons in a group 2 element determines its valency. In this case, calcium has two valence electrons. Consequently, valency is 2.

For the treatment and prevention of low calcium levels, muscle cramps, osteoporosis, bone softening, and PMS, people frequently take calcium orally. Additionally, it is used to treat cancer, stroke, high blood pressure, and numerous other illnesses, but many of these other uses lack solid scientific backing.

Alkaline earth metal calcium, denoted by the symbol Ca, is located in the second column of the periodic table. It has a 20-atomic weight. The periodic table's fourth row, below the magnesium, contains it.

To know more about calcium visit:

https://brainly.com/question/18774218

#SPJ4

The energy stored atomic or molecular scale is in the form of chemical energy as it is arise due to the interaction of the subatomic particles.

In nature the energy that is formed between two molecules of two atom that keeps the two atom or molecule attracted with each other is called the chemical energy that give rise to the bond between the molecules and atoms.

This chemical energy arises due to the interaction of the subatomic particles an atom with another.

This is a very short range energy. Also, it is the result of the one of the most fundamental forces that are present in the nature. This forces cannot be experienced at the first sight but when we look around us we see that all the things that we are using are altogether just because of this chemical energy.

To know more about chemical energy, visit,

https://brainly.com/question/624339

#SPJ4

The mass of the iodine is formed when 50.0 mL of 0.020 M KIO₃ solution reacts with an excess of the KI and HCl is 0.76 g.

The chemical reaction is as :

KlO₃  +  5KI +  6HCl ---->   3I₂  +  6KCl  +  3H₂O

The molarity of the KlO₃ = 0.020 M

The volume of the KlO₃ = 50 mL = 0.050 L

The molarity expression is as :

Molarity = moles / volume in L

Moles = molarity × volume

Moles = 0.020 × 0.050

Molarity = 0.001

1 mole of the KlO₃ = 3 moles of I₂

The moles of the I₂ = 3 × 0.001

                                 = 0.003 mol

The mass of the I₂ = moles × molar mass

                               = 0.003 × 253.8

                               = 0.76 g

To learn more about mass here

https://brainly.com/question/29312906

#SPJ4

The major organic product formed when the given alkyl halide is treated with potassium tert‑butoxide is cyclohexadiene.

Positions that are isolated from carbonyls or any other groups that pull electrons are likewise susceptible to elimination processes. Proton abstraction at the C atom occurs simultaneously with the cleavage of the C-X bond in one concentrated phase, or it can occur in two steps (the C-X bond is first broken to produce a carbocation intermediate, which is subsequently "quenched" by proton abstraction at the alpha atom).These mechanisms, termed E2 and E1, respectively, are important in laboratory organic chemistry

When the alkyl halide reacts with potassium tert-butoxide is cyclohexadiene.

Learn more about cyclohexadiene

brainly.com/question/29987619

#SPJ4

The type of charge does a hydrogen atom carry when it is bonded to another atom by a hydrogen bond will be partial positive charge

Partial positive charge, a hydrogen atom carries a partial positive charge  when it is bonded to another atom by a hydrogen bond

A hydrogen patch forms from two hydrogen titles, each with one electron in a 1 s orbital. The two hydrogen titles are attracted to the same brace of electrons in the covalent bond. The bond is either a brace of “ blotches ” or a solid line.

Two hydrogen atoms, each of which has one electron inside a 1 s orbital, combine to create a hydrogen molecule. The covalent bond's identical electron pair attracts the two hydrogen atoms. The bond is shown as a solid line or as an pair of "dots."

To know more about the covalent bond.

https://brainly.com/question/10777799

#SPJ4

The occurrence in the terms of the reversible process is given as :

A student notices that the grass was the damp when she arrived at the school at 7am and after that it was dry when she went out for the break between morning classes. The occurrence in the terms of the reversible process is given as :

When it was the cold at night, the below process occurred and the water condensed on  grass is as :

When it warmed up, the following process occurred and the water evaporated is as :

To learn more about reversible reaction here

https://brainly.com/question/22937109

#SPJ4

The true volume of the flask at 20°C is 10.00 mL.

The volume of a volumetric flask is determined by filling it to the mark with a liquid of known density and measuring the mass. The difference between the mass of the empty flask and the mass of the filled flask is equal to the mass of the liquid, which can then be used to calculate the volume of the liquid. In this case, the mass of the distilled water is

20.214 g - 10.2634 g = 9.9506 g.

The density of water at 20°C is approximately 0.9970 g/mL, so the volume of the water is given by:

This is the true volume of the flask at 20°C, which is equal to the volume indicated on the flask. The volumetric flask is designed to be used at a specific temperature (usually 20°C), and the volume indicated on the flask is calibrated to be the true volume at that temperature. It is important to measure the temperature of the liquid and the flask before using a volumetric flask to ensure accurate results.

Learn more about volume :

https://brainly.com/question/27100414

#SPJ4

The intensity of a peak in an IR spectra is related to the strength of the molecular vibration causing that peak. There are several factors that can influence the intensity of an IR peak, including the bond strength and bond polarity of the molecule.

In the case of vanillin, it is possible that the aldehyde peak is smaller compared to other peaks in the IR spectra due to the relative strength and polarity of the C=O bond. Aldehyde functional groups typically exhibit a strong C=O stretching vibration in the IR region, however, the intensity of this vibration can be affected by the specific chemical environment of the aldehyde group in the vanillin molecule. For example, if the aldehyde group is involved in hydrogen bonding or if it is part of a larger, more complex molecule, the intensity of the aldehyde peak may be reduced.

Learn more more vibration here:

https://brainly.com/question/20999521

#SPJ4

The total vapor pressure of the 2:1 mixture of component a and component b is equal to 3 times the vapor pressure of pure component a.

The total vapor pressure of a solution is given by the Raoult's law, which states that the vapor pressure of a component in a solution is proportional to its mole fraction.

Let the vapor pressure of pure component a be denoted as Pₐ and the vapor pressure of pure component b be denoted as 2Pₐ.

The mole fraction of component a in the solution is xₐ and the mole fraction of component b is xb = 1 - xₐ.

Then, the total vapor pressure is:

= P

= xₐPₐ + xb(2Pₐ)

= (xₐ)Pₐ + (1 - xₐ)(2Pₐ)

= Pₐ + 2Pₐ - 2xₐPₐ

= 3Pₐ.

Thus, the total vapor pressure of the 2:1 mixture of component a and component b is equal to 3 times the vapor pressure of pure component a.

To know more about vapor pressure please refer: https://brainly.com/question/11864750

#SPJ4

The rate of the reaction is 1.6 × 10⁻² M/s. When the concentration of A is 0.35 M. The rate constant if the (a) First order in A = 0.0457 s⁻¹ (b) Second order in A 0.130  M  s⁻¹.

The rate of the reaction = 1.6 × 10⁻² M/s

The concentration of A = 0.35 M

(a) First order in A

Rate = k[A]

where,

k = the rate constant

By solving the value , wet

k = r / [A]

k =  1.6 × 10⁻² M/s / 0.35 M

k = 0.0457 s⁻¹

The rate constant is 0.0457 s⁻¹.

(b) Second order in A

Rate = k [A]²

where,

Rate = 1.6 × 10⁻² M/s

k = r /  [A]²

k = 1.6 × 10⁻² M/s / ( 0.35 M)²

k = 0.130 M  s⁻¹

The rate constant is 0.130  M  s⁻¹.

To learn more about rate constant here

https://brainly.com/question/24125678

#SPJ4

The large tank is filled with the 125 mol O₂ to a pressure of 1145 torr at the 25.0 °C. The volume (in l) of the tank is the 2036.3 L .

The mole of the gas  O₂ = 125 mol

The pressure of the gas = 1145 torr = 1.50 atm

The temperature of the gas = 25.0 °C = 25 + 273 = 298 K

The ideal gas equation is as follows :

P V = n R T

V = n R T / P

V = (125 × 0.082 × 298 ) / 1.50

V = 2036.3 L

Thus the volume of the tank is 2036.3 L.

To learn more about volume here

https://brainly.com/question/15605399

#SPJ4

The units will constantly line up. A user can choose the units he wants the response to be displayed in, whether they be grams, kilograms, or pounds, and that unit will show in the answer just for the sake of clarity.

This determines an object's weight on the moon based on its weight on earth. The formula is Weight on the Moon= (Weight on Earth/9.81m/s2) * 1.622m/s2, which translates the weight of an object on Earth to lunar weight. The moon's radius and mass are both 1/4 times that of the earth. As a result, the gravitational attraction on the moon is roughly one-sixth that of the earth. As a result, an object weighs 1/6th as much on the moon as it does on Earth. Now, all you have to do to get an answer for the mass of the Earth in grams that is quite near to its true value is substitute pi = 3.14159, the period of the Moon, T, and its distance from the center of the Earth, R, before using G = 6.6 x 10-8. As a result, an object with a mass of 10 kg on the surface of the moon would weigh 98N.

Learn more about gravitational here-

https://brainly.com/question/3009841

#SPJ4

The mass of AgCl precipitated when 0.050 L of a 0.0500 M solution of AgNO3 reacts with 25.0 mL of 0.0330 M NaCl is 0.3582 g.

We can use the stoichiometry of the reaction to calculate the mass of AgCl precipitated. The reaction between AgNO3 and NaCl is as follows:

AgNO3 + NaCl -> AgCl + NaNO3

From the reaction, we can see that 1 mole of AgNO3 reacts with 1 mole of NaCl to form 1 mole of AgCl. Therefore, we can use the molar ratios to calculate the amount of AgCl precipitated.

First, we can calculate the moles of AgNO3 in the 0.050 L of a 0.0500 M solution:

moles = concentration x volume

= 0.0500 M x 0.050 L

= 0.00250 moles

Next, we can calculate the moles of NaCl in the 25.0 mL of a 0.0330 M solution:

moles = concentration x volume

= 0.0330 M x 25.0 mL x (1 L / 1000 mL)

= 0.00825 moles

Since 1 mole of AgNO3 reacts with 1 mole of NaCl, we know that the reaction will only proceed until all the AgNO3 is reacted. Therefore, the amount of AgCl precipitated is equal to the amount of AgNO3 used, or 0.00250 moles.

Finally, we can use the moles to calculate the mass of AgCl precipitated:

mass = moles x molar mass

= 0.00250 moles x (143.32 g/mol)

= 0.3582 g

You can learn more about AgCl at

https://brainly.com/question/25249351

#SPJ4

The amount of heat released when 17.5 g of Al reacts with excess Fe2O3 is -825.664 kJ.

To determine the amount of heat released when 17.5 g of Al reacts with excess Fe2O3, we need to first determine how many moles of Al are present. Then we can use the balanced chemical equation to determine the number of moles of Fe2O3 that react, and finally, we can use the enthalpy change of reaction to determine the amount of heat released.

Convert the mass of Al to moles:

moles Al = mass Al / molar mass Al

moles Al = 17.5 g / 26.98 g/mol

moles Al = 0.648 mol

Use the balanced chemical equation to determine the number of moles of Fe2O3 that react:

2 moles of Al react with 3 moles of Fe2O3

moles Fe2O3 = (3 moles) / (2 moles) * moles Al

moles Fe2O3 = 0.972 mol

Use the enthalpy change of reaction to determine the amount of heat released:

ΔH = -852 kJ/mol * moles Fe2O3

ΔH = -852 kJ/mol * 0.972 mol

ΔH = -825.664 kJ

Therefore, the amount of heat released when 17.5 g of Al reacts with excess Fe2O3 is -825.664 kJ.

To know more about Fe2O3 please refer:

brainly.com/question/4266384

#SPJ4

Before the advent of electrospray ionization (ESI) mass spectrometry, analysis of compounds was limited to molecules with a molecular weight of less than 1000 amu (atomic mass units).

This was due to the fact that many molecules with a higher molecular weight were not volatile enough to be analyzed using traditional mass spectrometry methods.

Additionally, the introduction of electrospray ionization allowed for the analysis of molecules in their native state, as opposed to traditional methods which often required the molecules to be fragmented first. This provided a much more accurate representation of the analyzed molecules, which was invaluable for the analysis of complex molecules such as proteins or nucleic acids.

Learn more about electrospray ionization:

https://brainly.com/question/28358172

#SPJ4

Molar mass of Ibuprofen is  206.29 g/mol.

A non-steroidal anti-inflammatory medicine called ibuprofen is used to treat inflammation, fever, and pain. This includes rheumatoid arthritis, migraines, and painful menstrual cycles. It can also be used to close a premature baby's patent ductus arteriosus. It can be administered intravenously or orally. Ibuprofen is a pain reliever that can be purchased without a prescription over-the-counter. It belongs to the class of medications known as non-steroidal anti-inflammatory medicines (NSAIDs) and is used to treat mild to severe pain, including toothache, migraine, and period pain. If you have ever experienced an allergic reaction or signs like wheezing, avoid taking ibuprofen by mouth or applying it to your skin. Ibuprofen is C13H18O2 so

Molar mass= 13*12+ 18*1 + 16*2 = 206

Learn more about Ibuprofen

brainly.com/question/29807990

#SPJ4

The given statement, production associates are not allowed to view the process safety management documents. They are only for supervisors and upper management is true.

Since they provide advice on how to manage the risks and hazards connected to certain operations or processes, these documents are often written with supervisors and top management in mind. This is done to make sure the management team has the knowledge it needs to decide on process safety in an informed manner and to make sure the right safety measures are in place to safeguard employees and the neighbourhood.

It is crucial to remember that a person's unique job responsibilities and the level of access required to carry out those duties should determine who has access to PSM documents. If it's necessary for them to carry out their duties, some production associates might have access to particular PSM documents.

To learn more about process safety management

https://brainly.com/question/16818668

#SPJ4

The situation in which two people stand on the same side of a large tire, both people pull the tire with equal force is creating an unbalanced force. The force from the opposite side too acts on the tire and make the displacement.

Force is an external agent acting on a body to change its motion or to deform it. The net force acting on the body depends on the direction and magnitude of all  the force acting on it.

If two equal forces acts on the body from the same side they add up together and the net force is their sum. If the forces are acting from the opposite sides, they will cancel each other and is said to be balanced.

Here, two forces from the side is not balanced by a force from the opposite side in case 3 and make a displacement.  Thus, the option 3 is correct.

Find more on unbalanced forces:

https://brainly.com/question/29769471

#SPJ1