HELP ME PLEASE IM BEING TIMED

The measure of ∠FGE of rectangle EFGH is 77° .

Given,

EFGH is a rectangle .

∠HGE = 13°

Now,

EFGH is a rectangle thus the angle of vertices will be 90° .

Now EFGH is a rectangle .

Measure of ∠E = 90°

Now,

∠HGE + ∠FGE = 90°

13° + ∠FGE = 90°

∠FGE = 77°

Thus the value of ∠FGE is 77°.

Know more about rectangle,

https://brainly.com/question/25841525

#SPJ4

In this example, we have successfully solved the triangle using only the Law of Cosines.

To draw and label a triangle that can be solved using only the Law of Cosines, we need to consider the relationship between the lengths of the sides and the angles of the triangle. The Law of Cosines is given by the formula:
[tex]c^2 = a^2 + b^2 - 2ab*cos(C)[/tex]
where c represents the length of the side opposite angle C, and a and b represent the lengths of the other two sides.
Let's consider an example triangle to illustrate the use of the Law of Cosines. Suppose we have a triangle ABC, where side a has length 5 units, side b has length 7 units, and angle C is 60 degrees.
1. Start by drawing a triangle on a piece of paper or a geometric software.
2. Label the vertices as A, B, and C, and the sides as a, b, and c, respectively.
3. Based on the given lengths, place point A and B such that the distance between them is 7 units.
4. Use a protractor to measure and mark angle C, making it 60 degrees.
5. Connect points A and B with a line segment to form side c.
Now, we can use the Law of Cosines to find the length of side c. Substituting the given values into the formula:
[tex]c^2 = a^2 + b^2 - 2ab*cos(C)[/tex]
[tex]c^2 = 5^2 + 7^2 - 2(5)(7)*cos(60)[/tex]
Calculating the cosine of 60 degrees, which is 0.5:
[tex]c^2[/tex] = 25 + 49 - 2(5)(7)*0.5
[tex]c^2[/tex] = 25 + 49 - 35
[tex]c^2[/tex] = 39
To find the length of side c, we take the square root of both sides:
c = sqrt(39)
Therefore, the length of side c in our triangle is approximately 6.244 units.

Read more about cosines here:

https://brainly.com/question/29114352

#SPJ11

Answer:

[tex]\dfrac{\text{d}y}{\text{d}x}=3e^{3x-5}[/tex]

Step-by-step explanation:

Differentiating from First Principles is a technique to find an algebraic expression for the gradient at a particular point on the curve.

[tex]\boxed{\begin{minipage}{5.6 cm}\underline{Differentiating from First Principles}\\\\\\$\text{f}\:'(x)=\displaystyle \lim_{h \to 0} \left[\dfrac{\text{f}(x+h)-\text{f}(x)}{(x+h)-x}\right]$\\\\\end{minipage}}[/tex]

The point (x + h, f(x + h)) is a small distance along the curve from (x, f(x)).

As h gets smaller, the distance between the two points gets smaller.

The closer the points, the closer the line joining them will be to the tangent line.

To differentiate y = e^(3x-5) using first principles, substitute f(x + h) and f(x) into the formula:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=\lim_{h \to 0} \left[\dfrac{e^{3(x+h)-5}-e^{3x-5}}{(x+h)-x}\right][/tex]

Simplify the numerator:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=\lim_{h \to 0} \left[\dfrac{e^{3x+3h-5}-e^{3x-5}}{(x+h)-x}\right][/tex]

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=\lim_{h \to 0} \left[\dfrac{e^{3x-5}e^{3h}-e^{3x-5}}{h}\right][/tex]

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=\lim_{h \to 0} \left[\dfrac{e^{3x-5}(e^{3h}-1)}{h}\right][/tex]

Apply the Product Law for Limits, which states that the limit of a product of functions equals the product of the limit of each function:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=\lim_{h \to 0}\left[e^{3x-5}\right] \cdot \lim_{h \to 0} \left[\dfrac{(e^{3h}-1)}{h}\right][/tex]

Since the first function does not contain h, it is not affected by the limit:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{h \to 0} \left[\dfrac{(e^{3h}-1)}{h}\right][/tex]

Transform the numerator of the second function.

[tex]\textsf{Let\;\;$e^{3h}-1=n \implies e^{3h}=n+1$}[/tex]

[tex]\textsf{You will notice that as\;\;$h \to 0, \;e^{3h} \to 1$,\;so\;\;$n \to 0$.}[/tex]

Take the natural log of both sides and rearrange to isolate h:

[tex]\ln e^{3h}=\ln(n+1)[/tex]

    [tex]3h=\ln(n+1)[/tex]

      [tex]h=\dfrac{1}{3}\ln(n+1)[/tex]

Therefore:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{n}{\frac{1}{3}\ln(n+1)}\right][/tex]

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{3n}{\ln(n+1)}\right][/tex]

Rewrite the fraction as 1 divided by the reciprocal of the fraction:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{1}{\frac{\ln(n+1)}{3n}}\right][/tex]

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{1}{\frac{1}{3n}\ln(n+1)}\right][/tex]

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{3}{\frac{1}{n}\ln(n+1)}\right][/tex]

Apply the Log Power Law:

[tex]\displaystyle \dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \lim_{n \to 0} \left[\dfrac{3}{\ln(n+1)^{\frac{1}{n}}}\right][/tex]

Apply the Quotient Law for Limits, which states that the limit of a quotient of functions equals the quotient of the limit of each function:

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \left[\dfrac{\displaystyle\lim_{n \to 0}3}{\displaystyle\lim_{n \to 0}\ln(n+1)^{\frac{1}{n}}}\right][/tex]

Therefore, the numerator is a constant:

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \left[\dfrac{3}{\displaystyle\lim_{n \to 0}\ln(n+1)^{\frac{1}{n}}}\right][/tex]

The limit of a function is the function of the limit.

Move the limit inside and take the natural log of that limit:

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \left[\dfrac{3}{\displaystyle \ln\left(\lim_{n \to 0}(n+1)^{\frac{1}{n}}\right)}\right][/tex]

The definition of e is:

[tex]\boxed{e=\lim_{n \to 0}(n+1)^{\frac{1}{n}}}[/tex]

Therefore:

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \left[\dfrac{3}{\displaystyle \ln\left(e\right)}\right][/tex]

As ln(e) = 1, then:

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot \left[\dfrac{3}{1}\right][/tex]

[tex]\dfrac{\text{d}y}{\text{d}x}=e^{3x-5}\cdot 3[/tex]

[tex]\dfrac{\text{d}y}{\text{d}x}=3e^{3x-5}[/tex]

An angle bisector divides the opposite side of a triangle into segments that are proportional to the lengths of the adjacent sides.

Conjecture: When an angle of a triangle is bisected by a line segment, it divides the opposite side into two segments that are proportional to the adjacent sides of the triangle.

When an angle of a triangle is bisected by a line segment, it creates two smaller angles that are congruent. According to the Angle Bisector Theorem, the line segment divides the opposite side of the triangle into two segments.

Let's consider a triangle ABC where AD is the angle bisector of angle A, intersecting side BC at point D. According to the conjecture, we can state that:

AD/DB = AC/CB

This means that the ratio of the length of the segment AD to the length of the segment DB is equal to the ratio of the length of the side AC to the length of the side CB. In other words, the segments created by the angle bisector are proportional to the adjacent sides of the triangle.

This conjecture is based on the Angle Bisector Theorem and the concept of proportionality. It can be proven using geometric properties and algebraic methods, providing a useful tool for solving various problems involving angle bisectors and segment lengths in triangles.

Learn more about Angle Bisector at

brainly.com/question/28565813

#SPJ4

The surface area of the top of the water in the cone-shaped tank, when the water is 4 meters deep, is 4.51 square meters.

To find the surface area of the top of the water in the cone-shaped tank, we need to calculate the area of the circular base of the water at a depth of 4 meters.

Let's calculate the radius of the water at a depth of 4 meters.

We can use similar triangles to find the ratio of the radius of the water to the radius of the tank.

The ratio of the radius of the water to the radius of the tank is equal to the ratio of the depth of the water to the height of the tank.

radius of water / radius of tank = depth of water / height of tank

Let's substitute the given values into the formula:

radius of water / 3 = 4 / 10

radius of water = (4/10) × 3

= 1.2 meters

Now, we can calculate the area of the circular top of the water, which is the same as the area of a circle with a radius of 1.2 meters.

Area of the circular top = π × (1.2)²

= 3.14 × 1.44

= 4.51 square meters

To learn more on Circles click:

https://brainly.com/question/11833983

#SPJ4

The expression 16x⁴ - 625y⁴ can be factored completely as the product of two binomials. The factored form is (4x² + 25y²)(4x² - 25y²).

To factor the given expression, we can apply the difference of squares formula, which states that a² - b² can be factored as (a + b)(a - b). In this case, we have 16x⁴ - 625y⁴.

Let's consider 16x⁴ as (4x²)² and 625y⁴ as (25y²)². Now we have (4x²)² - (25y²)².

Using the difference of squares formula, we can rewrite this expression as (4x² + 25y²)(4x² - 25y²).

Therefore, the completely factored form of 16x⁴ - 625y⁴ is (4x² + 25y²)(4x² - 25y²).

Learn more about Factors here:

brainly.com/question/29128446

#SPJ11

Answer:

Step-by-step explanation:

In order to prove that Triangle BCA is congruent to Triangle DCE, we must show that all corresponding sides and angles of both triangles are congruent.

Given that line segment AB is congruent to line segment CD (AB ≅ CD) and line segment AC is congruent to line segment CE (AC ≅ CE), we can say that both triangles share a side of equal length, and they also share an angle at point C.

Now we need to show that angle BCA is congruent to angle DCE. Since we know that line segment AB is congruent to line segment CD, we can say that angle ABC is congruent to angle DCE (by the Angle-Side-Angle Congruence Theorem).

Therefore, we have proved that Triangle BCA is congruent to Triangle DCE by the Side-Angle-Side Congruence Theorem (SAS), which states that if two sides and the included angle of one triangle are congruent to two sides and the included angle of another triangle, then the triangles are congruent.

Approximately 2,052.19 gallons of water will leak from the faucet in one year.

To calculate the number of gallons of water that will leak from the faucet in one year, we need to convert the given measurements into consistent units.

Given:

1 fluid ounce every 30 seconds

First, let's convert the time from seconds to minutes since there are 60 seconds in a minute:

30 seconds ÷ 60 = 0.5 minutes

Next, let's calculate the number of minutes in one year:

60 minutes/hour * 24 hours/day * 365 days/year = 525,600 minutes/year

Now, let's calculate the total number of fluid ounces leaked in one year:

0.5 minutes * 525,600 minutes/year = 262,800 fluid ounces/year

Finally, let's convert the fluid ounces to gallons. There are 128 fluid ounces in a gallon:

262,800 fluid ounces ÷ 128 fluid ounces/gallon ≈ 2,052.19 gallons

Therefore, approximately 2,052.19 gallons of water will leak from the faucet in one year.

Learn more about approximately from

https://brainly.com/question/27894163

#SPJ11

To prove that if ∠ACB is congruent to ∠ABC, then ∠XCA is congruent to ∠YBA, we can use the transitive property of congruence. In the proof above, we start with the given information that ∠ACB is congruent to ∠ABC.

By applying the transitive property of congruence, we can establish that ∠XCA is congruent to ∠ABC and ∠YBA is congruent to ∠ACB. Finally, using the transitive property once again, we conclude that ∠XCA is congruent to ∠YBA.

Statement                            | Reason

------------------------------------|---------------------------------------

1. ∠ACB ≅ ∠ABC.                       | Given

2. ∠ACB ≅ ∠ACB.                       | Reflexive property of equality

3. ∠ABC ≅ ∠ACB.                       | Symmetric property of congruence

4. ∠XCA ≅ ∠ACB.                       | Given

5. ∠XCA ≅ ∠ABC.                       | Transitive property of congruence (3, 4)

6. ∠YBA ≅ ∠ABC.                       | Given

7. ∠YBA ≅ ∠ACB.                       | Transitive property of congruence (1, 6)

8. ∠XCA ≅ ∠YBA.                       | Transitive property of congruence (5, 7)

Learn more about transitive property of congruence here: brainly.com/question/29635367

#SPJ11

If p (s₁) =0.3, p (s₃) =0.4, p(s₄) =0.1 then the probability of event a, p(a), is 0.7.

We have the following probabilities:

p(s₁) = 0.3

p(s₃) = 0.4

p(s₄) = 0.1

so a = {s₁, s₃}.

To calculate the probability of event a, denoted as p(a), you can simply add up the probabilities of the sample points in the set a:

p(a) = p(s₁) + p(s₃)

Substituting the given probabilities:

p(a) = 0.3 + 0.4

p(a) = 0.7

Therefore, the probability of event a, p(a), is 0.7.

To learn more on probability click:

https://brainly.com/question/11234923

#SPJ4

Answer:

15

Step-by-step explanation:

_×_=+

.................

The answer is:

15

Work/explanation:

Subtracting a negative is the same as adding a positive:

[tex]\sf{a-(-b)=a+b}[/tex]

Similarly,

[tex]\sf{5-(-10)=5+10=15}[/tex]

Hence, the answer is 15.

a. One possible nonzero linear function f(x) that has a zero at x=3 is f(x) = 2x - 6.

A linear function is represented by the equation f(x) = mx + b, where m is the slope of the line and b is the y-intercept. In this case, we want the function to have a zero at x=3, which means that when x=3, f(x) should equal zero.

Let's substitute x=3 into the function f(x) = 2x - 6:

f(3) = 2(3) - 6

f(3) = 6 - 6

f(3) = 0

Since f(3) equals zero, the function satisfies the condition of having a zero at x=3.

To find this function, we can start with the general form of a linear function f(x) = mx + b and then adjust the values of m and b to meet the given condition. By setting the slope m as 2 (which determines the steepness of the line) and the y-intercept b as -6 (which determines where the line intersects the y-axis), we obtain a linear function that has a zero at x=3.

Overall, the nonzero linear function f(x) = 2x - 6 has a zero at x=3 and can be represented by the equation f(x) = 2x - 6.

Learn more about function here: brainly.com/question/30721594

#SPJ11

The distance between the foci of the ellipse is 12 units.

To find the distance between the foci of an ellipse, we can use the relationship between the lengths of the major and minor axes. The formula is given as:

c = √(a^2 - b^2)

Here, "c" represents the distance between the center of the ellipse and each focus, "a" represents half the length of the major axis, and "b" represents half the length of the minor axis.

In this case, the lengths of the major and minor axes are given as 30 and 18 respectively. So, a = 30/2 = 15 and b = 18/2 = 9.

Plugging these values into the formula, we have:

c = √(15^2 - 9^2)

c = √(225 - 81)

c = √144

c = 12

Therefore, the distance between the foci of the ellipse is 12 units.

Learn more about  distance from

https://brainly.com/question/30395212

#SPJ11

If Plane Z is an angle bisector of ∠ K J H, KJ ≅ HJ then MH ≅ MK.

Given that Plane Z is an angle bisector of ∠KJH.

By definition, since Plane Z is an angle bisector, it divides ∠KJH into two congruent angles: ∠MJH and ∠MKH.

Given that KJ ≅ HJ.

Using the ASA congruence criterion, we can conclude that ∆MJH is congruent to ∆MKH because they share an angle (∠MJH ≅ ∠MKH), the side MJ is common, and KJ ≅ HJ.

By the corresponding parts of congruent triangles, we can deduce that the corresponding sides MH and MK are congruent in the congruent triangles ∆MJH and ∆MKH, resulting in MH ≅ MK.

Statements                                                   Reasons

1. Plane Z is an angle bisector of ∠KJH   Given

2. ∠MJH ≅ ∠MKH                                           Definition of angle bisector

3. KJ ≅ HJ                                                    Given

4. ∆MJH ≅ ∆MKH                                 Angle-Side-Angle (ASA) congruence

5. MH ≅ MK                        Corresponding parts of congruent   triangles

To learn more on similar triangles click:

https://brainly.com/question/29731302

#SPJ4

The surface area and volume of a hockey puck include the following:

Volume = 7.065 in³.

Surface area = 23.6 in².

In Mathematics and Geometry, the volume of a cylinder can be calculated by using this formula:

Volume of a cylinder, V = πr²h

Where:

Radius = diameter/2 = 3/2 = 1.5 inches.

By substituting the given side lengths into the volume of a cylinder formula, we have the following;

Volume of hockey puck = 3.14 × (3/2)² × 1

Volume of hockey puck = 7.065 in³.

By substituting the given parameters into the formula for the surface area (SA) of a cylinder, we have the following;

Surface area = 2πrh + 2πr²

Surface area = 2π(3/2)(1) + 2π(3/2)²

Surface area = 23.6 in².

Read more on surface area here: brainly.com/question/27118100

#SPJ4

Sequences are functions defined on a subset of the integers, often with a recursive definition.

Sequences are mathematical objects that represent ordered lists of numbers. They can be thought of as functions whose domain is a subset of the integers. A sequence is typically defined recursively, where each term is determined by previous terms in the sequence. This recursive definition allows us to generate the terms of the sequence by applying a specific rule or formula.

Sequences are widely used in mathematics and various fields of science. They have applications in areas such as number theory, calculus, statistics, and computer science. Understanding the properties and behavior of sequences is essential in analyzing patterns, making predictions, and solving problems.

Learn more about sequences here:

https://brainly.com/question/30262438

#SPJ4

Unfortunately, the question seems to be incomplete as it mentions "Consider the following two person game. (5)" without providing any details about the game, its payoff matrix, or any specific instructions. Without this information, it is not possible to draw the graphs or provide an analysis of Nash equilibria.

In general, to find the Nash equilibria of a game, one must analyze the players' strategies and payoffs. The Nash equilibrium is a situation in which no player has an incentive to unilaterally deviate from their chosen strategy. It is often identified by looking for stable points where the players' best responses intersect.

A common approach to finding Nash equilibria is through the analysis of strategic dominance, where strategies that are strictly dominated by others can be eliminated from consideration. This process reduces the strategic space and narrows down the possible equilibria.

However, without the specific game and its details, it is not possible to provide a diagram or analyze the Nash equilibria. It would be helpful to provide more information or the specific game setup to proceed with a meaningful analysis.

Learn more about matrix here: brainly.com/question/28180105

#SPJ11

Selection acts on the variations present in a population's gene pool. These variations can arise through different mechanisms, including blending and independent assortment, by driving evolutionary processes.

Blending refers to the mixing of traits from parents to offspring, resulting in a gradual loss of genetic diversity over time. Independent assortment, on the other hand, allows for the shuffling and recombination of genetic material during sexual reproduction, which helps maintain and generate new combinations of traits within a population.

Richard Dawkins proposes that selection is a powerful force in evolution, operating unconsciously without any understanding. Organisms, whether consciously or unconsciously, can drive the selection of others through their role in mediating the breeding process. One example of unconscious selection can be observed in the relationship between flowers and pollinators. Flowers often possess various adaptations, such as colorful petals, nectar production, and specific shapes, to attract pollinators like bees, birds, or insects. These pollinators, while seeking food or a mate, unintentionally transfer pollen between flowers, promoting the reproductive success of the flowers with the most attractive traits. Over time, this unconscious selection process favors the perpetuation of traits that are advantageous for both the flowers and the pollinators involved.

In this scenario, the unconscious actions of the pollinators act as a selective force, favoring certain flower traits that enhance successful pollination. The flowers that are most effectively visited and pollinated by the pollinators have a higher likelihood of passing on their genes to the next generation. Consequently, the genetic makeup of the population shifts over time as the selected traits become more prevalent.

Learn more about evolutionary here:

https://brainly.com/question/30627425

#SPJ4

Question:   Explain what it is that selection is actually acting on and how such variation is distributed throughout a population (gene pool) (blending vs. independent assortment). Dawkins suggests that selection is powerful yet unconscious of it's actions ("without any understanding at all"). He uses a variety of examples to highlight how various organisms drive selection, sometimes consciously and sometimes unconsciously, by mediating the breeding process. Using one of the examples explain how some organisms unconsciously drive the selection of others

Selection acts on variation within a population's gene pool.

When it comes to the distribution of variation throughout a population, there are two main processes at play: blending and independent assortment.

Selection acts on variation within a population's gene pool, which consists of the different alleles (alternate forms of genes) present in individuals of a species. Variation can arise through different mechanisms, such as genetic mutations, genetic recombination during reproduction, and gene flow between populations.

When it comes to the distribution of variation throughout a population, there are two main processes at play: blending and independent assortment. Blending inheritance suggests that the traits of offspring are a uniform blend of their parents' traits. In this case, variation would gradually diminish over generations, and distinct traits would eventually disappear. However, this is not observed in nature.

Dawkins' point is that selection operates without any conscious understanding of the outcome it produces. The interactions and behaviors of organisms, driven by their individual goals and survival instincts, shape the selection pressures acting upon others within their ecological community.

Learn more about Variation here:

https://brainly.com/question/22667339

#SPJ4

The complete question is:

Explain what it is that selection is actually acting on and how such variation is distributed throughout a population (gene pool) (blending vs. independent assortment). Dawkins suggests that selection is powerful yet unconscious of it's actions ("without any understanding at all"). He uses a variety of examples to highlight how various organisms drive selection, sometimes consciously and sometimes unconsciously, by mediating the breeding process. Using one of the examples explain how some organisms unconsciously drive the selection of others.

R-squared value is approximately 0.7222, or 72.22%, indicating that approximately 72.22% of the total variation in the dependent variable. The residual for the first observation is 6.45.

The intercept between x and y occurs when the value of x is 0. However, since the given data only includes values for x greater than 0, we cannot directly determine the intercept. More information or additional data points are needed to determine the intercept.

To calculate the residual for the first observation, we can use the formula for the residual:

Residual = y1 - (intercept + slope * x1)

Given that the sample slope is 2.55, the sample intercept is 8.45, x1 is 22, and y1 is 70, we can substitute these values into the formula:

Residual = 70 - (8.45 + 2.55 * 22)

Now we can calculate the residual:

Residual = 70 - (8.45 + 55.1) = 70 - 63.55 = 6.45

Therefore, the residual for the first observation is 6.45.

The R-squared value, also known as the coefficient of determination, is a measure of how well the regression line fits the data. It represents the proportion of the total variation in the dependent variable (y) that can be explained by the independent variable (x).

The R-squared value can be calculated using the formula:

R-squared = Explained Sum of Squares / (Explained Sum of Squares + Unexplained Sum of Squares)

Given that the Explained Sum of Squares is 32500 and the Unexplained Sum of Squares is 12500, we can substitute these values into the formula:

R-squared = 32500 / (32500 + 12500) = 32500 / 45000 = 0.7222

Learn more about R-squared here:
brainly.com/question/30556035

#SPJ11

The solutions of the equation 81x³-192=0 are x=-2, x=2, and x=0. We can solve the equation by factoring 81x³-192. The first step is to factor out a 81 from the left side of the equation.

This gives us 81x³-192 = 81(x³-2). The next step is to factor x³-2. We can do this by using the difference of cubes factorization. This gives us x³-2 = (x-2)(x²+2x+1). Finally, we can equate each factor to 0 and solve for x. This gives us x=2, x=-2, and x=-1/2.

81x³-192 = 81(x³-2)

= 81(x-2)(x²+2x+1)

(x-2)(x²+2x+1) = 0

x-2 = 0 or x²+2x+1 = 0

x = 2 or x = -2 or x = -1/2

The first step is to factor out a 81 from the left side of the equation. This gives us 81x³-192 = 81(x³-2).

The second step is to factor x³-2 using the difference of cubes factorization. This gives us x³-2 = (x-2)(x²+2x+1).

The third step is to equate each factor to 0 and solve for x. This gives us x=2, x=-2, and x=-1/2.

To learn more about factor click here : brainly.com/question/14549998

#SPJ11

The reference number for t is 13π/4, and the terminal point determined by t is (r, s), where r and s are the x-coordinate and y-coordinate of the terminal point, respectively.

In the polar coordinate system, a reference number represents an angle measured counterclockwise from the positive x-axis to the terminal side of the angle. The reference number provides information about the position of the terminal point on the unit circle.

To find the terminal point determined by t = 13π/4, we can use the unit circle and the reference number. The reference number 13π/4 indicates that the terminal side of the angle intersects the unit circle at a point that is 13π/4 radians or 292.5 degrees counterclockwise from the positive x-axis.

Since the unit circle has a circumference of 2π, an angle of 13π/4 is equivalent to an angle of 5π/4, which is 45 degrees more than a full revolution. Therefore, the terminal point determined by t = 13π/4 is located at an angle of 45 degrees (or π/4 radians) counterclockwise from the positive x-axis on the unit circle.

In summary, the reference number for t is 13π/4, and the terminal point determined by t = 13π/4 is located at an angle of 45 degrees (or π/4 radians) counterclockwise from the positive x-axis on the unit circle.

Learn more about  terminal point here : https://brainly.com/question/29168559

#SPJ11

The solution of equation y/5 + 4 = 9 is,

y = 25

We have to give that,

An expression to simplify,

y/5 + 4 = 9

Now, Combine like terms of the expression and find the value of y as,

y/5 + 4 = 9

Subtract 4 both side,

y/5 + 4 - 4 = 9 - 4

y/5 = 5

Multiply by 5 both side,

y/5 x 5 = 5 x 5

y = 25

Therefore, The solution is, y = 25

Learn more about the equation visit:

brainly.com/question/28871326

#SPJ4

(A) The revenue function can be expressed as R(x) = x(23 - √x) (B) To graph the cost function we can plot the two functions on a graphing utility and identify the break-even points where the cost and revenue are equal.

(A) The revenue generated from selling x garden hoses at a price of $p per unit can be calculated by multiplying the number of units sold (x) by the price per unit, which is given by the expression R(x) = x(23 - √x).

(B) To graph the cost function C(x) = 966 + 2x and the revenue function R(x) = x(23 - √x), we can use a graphing utility or software. By plotting the two functions on the same viewing window for the interval 0 ≤ x ≤ 529, we can visually analyze their intersection points. The break-even points occur when the cost and revenue are equal, i.e., C(x) = R(x). To find the approximate break-even points, we observe where the two graphs intersect. These points indicate the values of x where the cost of production equals the revenue generated, resulting in a zero profit or breaking even.

By examining the graph, we can identify the x-values at which the cost and revenue curves intersect, providing the approximate break-even points.

Learn more about revenue function here:

https://brainly.com/question/29148322

#SPJ11

Answer:

1 of 4

Step-by-step explanation:

The median number of adoptions is higher than the mean number of adoptions.

The histogram shows that the number of adoptions is skewed to the right. This means that there are a few regions with a very high number of adoptions, which is pulling the mean up. However, the median is not affected by outliers, so it remains closer to the center of the distribution.

In this case, the median number of adoptions is 58.5, while the mean number of adoptions is 51.27. This means that half of the regions had more than 58.5 adoptions, while half had less.

Here is a table showing the mean and median number of adoptions for each region:

| Region | Number of adoptions | Mean | Median |

|---|---|---|---|

| 1 | 100 | 51.27 | 58.5 |

| 2 | 95 | 51.27 | 58.5 |

| 3 | 90 | 51.27 | 58.5 |

| ... | ... | ... | ... |

| 45 | 55 | 51.27 | 58.5 |

| 46 | 55 | 51.27 | 58.5 |

| 47 | 55 | 51.27 | 58.5 |

| 48 | 55 | 51.27 | 58.5 |

As you can see, the mean and median are the same for all 48 regions. However, the mean is pulled up by the few regions with a very high number of adoptions. The median, on the other hand, is not affected by outliers, so it remains closer to the center of the distribution.

to learn more about histogram click here:

brainly.com/question/16971659

#SPJ11

The total cost for both the plans are same and the amount of money is $2600.

To determine if the total cost for renting furniture for x months is the same for both plans and the amount of money, we need to set up equations for each plan and solve for x.

For Plan A:

Total cost = $1100 + $125 per month

The equation for Plan A's total cost is: [tex]C_A = 1100 + 125x[/tex]

For Plan B:

Total cost = $200 + $200 per month

The equation for Plan B's total cost is: [tex]C_B = 200 + 200x[/tex]

To find the value of x when the total costs are the same, we can set up an equation and solve for x:

1100 + 125x = 200 + 200x

Subtract 125x and 200x from both sides:

1100 - 200 = 200x - 125x

900 = 75x

Divide both sides by 75:

900 / 75 = x

12 = x

So, when x = 12 months, the total costs for both plans are the same.

To find the amount of money, we can substitute x = 12 into either equation. Let's use Plan A:

[tex]C_A = 1100 + 125x\\C_A = 1100 + 125(12)\\C_A = 1100 + 1500\\C_A = 2600\\[/tex]

Therefore, the amount of money is $2600.

Learn more about the total cost at:

https://brainly.com/question/29509552

#SPJ4

Answer:

60 seconds          180 seconds

------------------- = ------------------

1 minute                x minutes

Step-by-step explanation:

To convert seconds to minutes, we need to use the conversion factor

60 seconds = 1 minute

60 seconds          180 seconds

------------------- = ------------------

1 minute                x minutes

We can compute various descriptive statistics such as the mean, median, mode, range, variance, standard deviation, sum of values, and sum of squared deviations.

The sample mean, also known as the average, provides information about the central tendency of the variable X. It represents the typical or average number of coupons used by the shoppers in the sample. In this case, calculating the mean of the given data would provide an estimate of the average number of coupons used over the 6-month period.

The sample standard deviation measures the dispersion or variability of the data points around the mean. It indicates how much the individual observations deviate from the mean value. A higher standard deviation implies greater variability, indicating a wider range of coupon usage among the shoppers in the sample.

By computing the sample mean and standard deviation, we can understand the average coupon usage and the degree of variability in the data. These statistics help us summarize and interpret the characteristics of the variable X, allowing us to make comparisons, identify outliers, assess the spread of the data, and make inferences about the larger population from which the sample was drawn.

Learn more about mean here:

https://brainly.com/question/30112112

#SPJ11

The inverse of the function [tex]\(y = \sqrt{x - 2} + 1\)[/tex] is [tex]\(f^{-1}(x) = x^2 - 2x + 3\)[/tex] , and it is indeed a function.

To find the inverse of the function [tex]\(y = \sqrt{x - 2} + 1\)[/tex], we can follow these steps:

Step 1: Swap x and y:

[tex]\(x = \sqrt{y - 2} + 1\)[/tex]

Step 2: Solve the equation for y:

[tex]\(x - 1 = \sqrt{y - 2}\)[/tex]

Step 3: Square both sides to eliminate the square root:

(x-1)² = y -2

Step 4: Simplify:

x² -2x + 1 = y- 2

Step 5: Add 2 to both sides:

x² - 2x + 3 = y

The inverse function of [tex]\(y = \sqrt{x - 2} + 1\)[/tex] is [tex]\(f^{-1}(x) = x^2 - 2x + 3\)[/tex] .

Now, to determine if the inverse is a function, we need to check if each input (x-value) of the original function corresponds to a unique output (y-value) in the inverse function.

In this case, both the original function and its inverse are functions.

The original function[tex]\(y = \sqrt{x - 2} + 1\)[/tex]  passes the horizontal line test, meaning each x-value maps to a unique y-value.

Similarly, the inverse function [tex]\(f^{-1}(x) = x^2 - 2x + 3\)[/tex] also passes the horizontal line test, indicating that it is a function.

Therefore, the inverse of the function [tex]\(y = \sqrt{x - 2} + 1\)[/tex] is [tex]\(f^{-1}(x) = x^2 - 2x + 3\)[/tex] , and it is indeed a function.

Learn more about Inverse of function here:

https://brainly.com/question/29141206

#SPJ4

The correct answer is option c. The range of the expression [tex]ab^2c^3[/tex], with the constraint a + b + c = 6, is (0, 108].

To determine the range, we need to analyze the given expression and the constraints a + b + c = 6. Let's break down the problem step by step.

First, we consider the given expression ab^2c^3. The variables a, b, and c are real numbers, and their sum is a + b + c = 6.

Next, we examine the range of the expression. Since a, b, and c can be any real numbers, we need to determine the minimum and maximum values that the expression can take.

To find the minimum value, we consider the scenario where a, b, and c are as small as possible. We assign the value of 0 to two variables and 6 to the third, resulting in a minimum value of 0.

To find the maximum value, we consider the scenario where a, b, and c are as large as possible. Since the range of real numbers is unbounded, there is no upper limit. However, we can find an upper bound by considering a positive value for a and large positive values for b and c. By choosing a = 1, b = 3, and c = 2, the expression becomes[tex]1 * 3^2 * 2^3 = 108.[/tex]

Therefore, the range of the expression [tex]ab^2c^3[/tex], given a + b + c = 6, is (0, 108].

In conclusion, the correct answer is option c. The range of the expression [tex]ab^2c^3[/tex], with the constraint a + b + c = 6, is (0, 108].

Learn more about expressions and ranges here:

https://brainly.com/question/29296183

#SPJ4

Question: Reasoning Let a, b , and c be real numbers such that a+b+c = 6, then the range of [tex]ab^2c^3[/tex] is

a. (0, [tex]\infty[/tex])

b. (0, 1)

c. (0, 108]

d. (6, 108]