Help required. Struggling sm with flowcharts, shapes, etc., and I have a test on them tomorrow

Answer:

noun

1.

a surface of which one end or side is at a higher level than another; a rising or falling surface.

Step-by-step explanation:

steepness

The slope of a line is a measure of its steepness. Mathematically, slope is calculated as "rise over run" (change in y divided by change in x)

step one: identify two points on the line

step two: select one to be (x1,y1) and the other to be (x2,y2)

step three: use the slope equation calulate slope

2x-3=8+7(+3)

2y-3(+3)=8x+7(+3)

2y=8x+10

----- --------

2y=8x+10

y=4x+5

Answer:

m=4

Answer:

51, 53, 55, 58, 60

Step-by-step explanation:

The minimum is the lowest value in the data set, that is 51

The maximum is the largest value in the data set, that is 60

The median is the middle value of the data, arranged in ascending order. If there is no exact middle then it is the average of the 2 values either side of the middle.

51, 51, 53, 53, 54, 55, 55, 56, 58, 58, 58, 59, 60

                                     ↑ middle

median = 55

The lower quartile is the middle value to the left of the median

51, 51, 53, 53, 54, 55

               ↑

Q₁ = [tex]\frac{53+53}{2}[/tex] = [tex]\frac{106}{2}[/tex] = 53

The upper quartile is the middle value of the data to the right of the median

56, 58, 58, 58, 59, 60

                 ↑

Q₃ = [tex]\frac{58+58}{2}[/tex] = [tex]\frac{116}{2}[/tex] = 58

Answer:

9

Step-by-step explanation:

pemdas

9-3÷1/3+1

division

3 and 1/3 becomes 1

we have 9-1+1

which simplifies to 9

Answer:

12

Step-by-step explanation:

Answer:

12

Step-by-step explanation:

k12 test

Answer:

        => 4x - 2x + 15

        => 2x + 15

        => -8 - 36x + 108x²

        => 15 - 14 - 56x

        => 1 - 56x

Step-by-step explanation:

Hoped this helped.

Answer:

[tex]\sf 1)\: 4x-\left(2x-15\right)[/tex]

Apply Distributive property:

[tex]\sf 4x-2x+15[/tex]

Combine like terms:

[tex]\boxed{\sf 2x+15}[/tex]

_____________

[tex]\sf 2)\:-8 + 9x (-4 + 12x)[/tex]

Apply Distributive property:

[tex]\boxed{\sf -8-36x+108x^2d}[/tex]

_______________

[tex]\sf 3)\: 15 - 14 ( 1 + 4x )[/tex]

Apply Distributive property:

[tex]\sf 15-14-56x[/tex]

Subtract numbers:

[tex]\boxed{\sf 1-56x}[/tex]

_______________________________________

Answer:

8^5^7

Step-by-step explanation:

Multiply the numbers:

4X^2 y^3 x 2x^3 y^4

8^2 ^3 ^3 ^4

Combine Exponents:

8^2 ^3 ^3 ^4

8^5 ^3 ^4

8^5 ^3 ^4

8^5 ^7

Answer:

Gordon types 68 words per minute

Step-by-step explanation:

2584/38=68

Answer:

Sophia read 32 books and her brother read 8

Step-by-step explanation:

Represent Sophia as 4x and her brother as x

4x + x = 40

5x = 40

x = 8

Therefore, her brother read 8 books and Sophia read 32 books

Answer:

Step-by-step explanation:

The given rate, in words per minute, is ...

  (190 words)/(5 min) = 38 words/min

The offered ratios are ...

  38/1 = 38 . . . . proportional

  74/2 = 37 . . . . NOT proportional

  230/45 ≈ 5.11 . . . NOT proportional

  290/105 ≈ 2.76 . . . NOT proportional

  570/15 = 38 . . . . proportional

  950/25 = 38 . . . . proportional

Answer:

12, 63 and 21 sum to 96

.....

The statement that best describes the line segment drawn in relation to the y-axis is (c) the y-axis is a bisector of the segment drawn.

The transformation rule is given as:

[tex](x,y) \to (-x,y)[/tex]

When the triangle is reflected to form triangle H'A'M', the vertices of triangle H'A'M' would be:

[tex]H'A'M' = (-x,y)[/tex]

So, the distance from point A to the y-axis is equidistant to the distance from point A' to the y-axis.

This, in other words means that the y-axis bisects the line segment AA'.

Hence, the relation between the segment and the y-axis is (c)

Read more about reflection at:

https://brainly.com/question/1600006

Answer:

C. The y-axis is a bisector of the segment drawn.

Step-by-step explanation:

Answer:

the image was not clear....hope the values are correct

Answer is in the attached file.

Answer:

Third quadrant

Step-by-step explanation:

The complex and real parts can be added separately:

(-3 - 5i) + (2 + 4i) = -1 -i

This shows that the sum would be in the third quadrant of the complex plane as there is negative real and negative imaginary parts.

Answer:

5. Angles FGE and CGE are supplementary

6. Angles FGE and BGC are vertical

7. Angles FGE and GED are adjacent

Step-by-step explanation:

Problem 5

Explanation:

The straight line EGB can be decomposed into the angle pieces of angle EGF and angle FGB. Another way we can break this straight angle down is to break it into angle EGA and angle AGB. Whichever route you go for, the smaller angles add back to 180 degrees. There are other possible answers you could go for. Check out the diagram below for a visual of these angles (shown in red)

========================================================

Problem 6

Answer: Angle AGB and angle EGD

Explanation:

Focus on lines AD and EB. They intersect at point G. The two lines form the opposite angles AGD and EGD which are considered vertical angles. Whenever we have an X shape like this, we'll have vertical angles in the opposite positions like this. Vertical angles are always congruent. There are other pairs of vertical angles shown in this diagram. Check out the diagram below for a visual of these angles (shown in blue)

========================================================

Problem 7

Explanation:

The angles BGC and CGD are right next to each other, so we consider them adjacent. They share the common ray GC. Think of it like two neighbors sharing a common wall in an apartment building. There are other possible answers you could go with as long as the two angles share a common ray or line, and also share a common vertex as well. Check out the diagram below for a visual of these angles (shown in green)

Answer:

1. 27

2. 48

3. 40

Step-by-step explanation:

3 to the power of 2 is 9 (3×3)

9×3=27. (8-5=3)

6 to the power of 2 is 36 (6×6)

36+12=48. (4×3=12)

42-2=40

I don't understand the question your asking

Answer:

Danny is incorrect.

Step-by-step explanation:

1 loaf of bread = 1.2

1 bottle of mil = 0.7

2 packets of cheese = 4.6

1.2+0.7+4.6 = 6.5

10-6.5 = 3.5

Danny is incorrect as he should be given £3.50 change instead of £3.30 change.

Answer: Yes

Step-by-step explanation:

Yes area should be right because you are finidng how much it covers which would be area. A way I used to remember it was you looking for the AREA it covers so that awnser is area! Hope that helped!

Answer:

110cm²

Step-by-step explanation:

*Diagram is ALSO not accurately drawn

18cm-6cm-5cm=7cm

11cm-9cm=2cm

Area:

11cm×6cm=66cm²

7cm×2cm=14cm²

6cm×5cm=30cm²

Area of the shape:

66cm²+14cm²+30cm²=110cm²

Answer:

263-5000=4737

Step-by-step explanation:

IF ITS -5000-263

if you subtract a negative to a negative it makes the negative increase. -5000-263 would end up being technically -5000+(-263). A number line would help you, because on a number line, when subtracting, you go to the left.

[-5000+(-263)=-5263]

IF ITS 263-(-5000)

do you see those two - signs? Those cross eachother out, turning it into a +, also making the -5000 not negative anymore. Making 263-(-5000) = 263+5000.

[263+5000=5263]

Answer:

B. (1.8)/(30) = (x)/(45)

Transformation involves changing the position of a shape

(a) The sequence that maps both triangles

From the figure the coordinates of both triangles are:

[tex]A = (-5,0)[/tex]

[tex]B = (-2,1)[/tex]

[tex]C = (-4,2)[/tex]

[tex]A' = (4,-2)[/tex]

[tex]B' = (1,-1)[/tex]

[tex]C = (3,0)[/tex]

Start by reflecting triangle ABC across the y-axis.

The rule of this transformation is:

[tex](x,y) \to (-x,y)[/tex]

So, we have:

[tex]A = (5,0)[/tex]

[tex]B = (2,1)[/tex]

[tex]C = (4,2)[/tex]

Next, translate the triangle 1 unit left and 2 units down

The rule of this transformation is:

[tex](x,y) \to (x,-1,y-2)[/tex]

So, we have:

[tex]A' = (4,-2)[/tex]

[tex]B' = (1,-1)[/tex]

[tex]C = (3,0)[/tex]

Hence, the sequence that maps ∆ABC to ∆A′B′C′ is reflection across the y-axis, followed by horizontal shift to the left by 1 unit, and vertical shift down by 2 units

(b) The ordered pair rule

In (a), we have:

[tex](x,y) \to (-x,y)[/tex] ---- reflection

[tex](x,y) \to (x,-1,y-2)[/tex] --- translation

Combine both transformations, so we have the following ordered pair:

[tex](x,y) \to (-x,-1,y-2)[/tex]

Hence, the ordered pair rule is: [tex](x,y) \to (-x,-1,y-2)[/tex]

Read more about transformation at:

https://brainly.com/question/22047495

Answer:

n=13

Step-by-step explanation:

39*5=15n

195=15n

13=n

Answer:

2.8 pounds

Step-by-step explanation: For this one, I rounded the answer, but what you need to do is divide 20 by 7.

20/7 = 2.85714285714

2.85714285714 ≈ 2.8 pounds

Answer:

30 degree

Step-by-step explanation:

sum of the interior angles of a hexagon=720degree

one angle of the hexagon=720/6=120degree

one angle of the rhombus=90 degree

therefore, x=120-90=30

Answer:

There are 200 centimetres in 2 metres. Therefore, 80 centimetres is equal to 80/200 x 100 = 40 percent of 2 metres

Based on the definition of a parallel line and the Midsegment Theorem the following are the right answers:

1. a.) BD║AE

b.) BF ║CE

c.) DF║CA

2. a.) YZ║RT

b.) RS ║XZ

c.) XY║TS

3. a.) FH = 24

b.) JL = 74

c.) KJ = 60

d.) FJ = 30

4. a.) AE = 26

b.) AN = 58

c.) CT = 21.5

d.) Perimeter of ΔAEN = 127

5. x = 15

6. x = 6

Parallel lines coplanar straight lines that do not meet each other and are equal distance from each other.

Applying the definition of a parallel line and the Midsegment Theorem the following can be solved as shown below:

1. The pairs of parallel lines in ΔAEC (i.e. the midsegment is parallel to the third side) are:

a.) BD║AE

b.) BF ║CE

c.) DF║CA

2. The segment parallel to the given segments are:

a.) YZ║RT

b.) RS ║XZ

c.) XY║TS

3. Given:

FG = 37; KL = 48; GH = 30

a.) FH = ½(KL)

FH = ½(48)

FH = 24

b.) JL = 2(FG)

JL = 2(37)

JL = 74

c.) KJ = 2(GH)

KJ = 2(30)

KJ = 60

d.) FJ = ½(KJ)

FJ = ½(60)

FJ = 30

4. Given:

PT = 13

EN = 43

CP = 29

a.) AE = 2(PT)

AE = 2(13)

AE = 26

b.) AN = 2(CP)

AN = 2(29)

AN = 58

c.) CT = ½(EN)

CT = ½(43)

CT = 21.5

d.) Perimeter of ΔAEN = EN + AN + AE

Perimeter of ΔAEN = 43 + 58 + 26

Perimeter of ΔAEN = 127

5. 10x + 44 = 2(8x - 23) (midsegment theorem)

10x + 44 = 16x - 46

10x - 16x = -44 - 46

-6x = -90

Divide both sides by -6

x = 15

6. 19x - 28 = 2(6x + 7) (midsegment theorem)

19x - 28 = 12x + 14

19x - 12x = 28 + 14

7x = 42

x = 6

Learn more about midsegment theorem on:

https://brainly.com/question/11482568