hi hello can i get help on this ASAP
its two questions just to let you know

please please help

When particles in one region of a fluid gain thermal energy, they spread out further, move faster, and experience more collisions. As a result, the particles have a lower density and rise through the fluid.

The boiling of liquid on a stove is an example of thermal energy. Thermal energy is produced when a product's molecules and atoms move more quickly due to a rise in temperature.

There are three methods that thermal energy can be transferred: conduction, convection, and radiation. Conduction is the process of thermal energy transmission between molecules that are close to one another and in touch.

To know more about Thermal energy visit:

https://brainly.com/question/11278589

#SPJ4

The star will look dimmer and redder than it would if it were outside the cloud.

What makes up an interstellar cloud?

Interstellar clouds mostly made of dust and gas can be found in the space between the stars. In interstellar molecular clouds, over 100 molecules (neutrals, ions, and radicals), predominantly carbon-containing compounds, have been discovered.

What do you name an interstellar cloud?

A molecular cloud is an interstellar clump or cloud that is opaque due to the presence of dust grains within it. The shape of such dark clouds is exceedingly irregular: they have no clearly defined outer boundaries and, due to turbulence, can take on convoluted serpentine patterns.

To learn more about interstellar cloud

https://brainly.com/question/2114825

#SPJ4

Given:

Height = 53 m

Given that the rock is dropped from the top of a bridge above the river, let's answer the following questions:

• (a). The acceleration of the rock as it falls.

Since the rock is in free fall, the acceleration of the rock as it falls will be the acceleration due to gravity.

a = 9.8 m/s²

Therefore, the acceleration of the rock as it falls is 9.8 m/s².

• (b). How long does it take to hit the water?

To find the time, apply the formula:

Where:

s = 53 m

t is the time

a is the acceleration

u is the initial velocity = 0 m/s

Let's solve for the time, t:

Therefore, the time is 3.29 seconds.

(c). If the rock is dropped horizontally instead, there will be no change in the vertical velocity.

The time will also not change.

The time will be 3.29 seconds

ANSWER:

(a). 9.8 m/s^2

(b). 3.29 seconds

(c). 3.29 seconds

You spend most of your time in warm, rarefied clouds of atomic hydrogen

What is milky way?

Our solar system is part of a galaxy called the Milky Way[b], which gets its name from how it appears to us on Earth: as a hazy strip of light in the night sky made up of stars that are too close together to be seen individually. The phrase Milky Way is a translation of the Latin route lactea from the Greek o (galaktikos kklos), meaning "milky circle"[18][19][20]. From Earth, the Milky Way appears as a band because its disk-shaped structure is seen from within. Using his telescope, Galileo Galilei first distinguished the band of light in 1610. Most astronomers believed that the Milky Way contained all of the stars in the Universe up until the early 1920s.

Back then, instead of being obscured by the glare of city lights, everyone in the world could look up at night and see a dark, starry sky. When people looked up at the starry sky in those prehistoric times, they noticed a ghostly strip of light arcing across the skies from horizon to horizon. With the changing of the seasons, this lovely arc of light travelled across the sky. Even the most casual observers of the sky may see that portions of the band are hidden by what we now know to be massive dust clouds.

Learn more about from milky way frim given link

https://brainly.com/question/13485795

#SPJ4

The particles in the ice cream as it freezes will come together.

Freezing is a phase change that occurs in liquid substances, where a liquid turns into a solid when its temperature is lowered below its freezing point.

When a liquid substance freezes, the particles of the substance comes together because the mean distance between the particles has been reduced due to decrease in temperature.

If we consider ice cream, when it freezes as a result decrease in temperature, it solidifies because the molecules are closer to each other.

Thus, when the temperature of an ice cream reduces, the ice cream will solidify.

Learn more about freezing here: https://brainly.com/question/24314907

#SPJ1

1. The free body diagram is shown below:

2.

Given:

F1 = 20N

F2 = 15N

Unknowns:

θ: direction of the net force = ?

3.

In order to find the unknown angle θ, use the tangent function, as follow:

where opposite is F1 and adjacent is F2. To obtain θ it is necessary to apply inverse tangent.

5. Then, you have:

Hence, the direction is 53.13 degrees to the north of the west

Answer:

type good your question

The horizontal velocity with which the Cannonball was launched is 14.28m/s .

What is velocity?

velocity is defined as the rate of change of displacement of the body.

mathematically,

v = s/t

where, v is velocity,

s = displacement

t = time

Given,

A cannonball is launched horizontally from the top of cliff which is 10.4 meters high.

and it lands 20.8 meter away from the base of the cliff.

Here, h = 10.4 m and x = 20.8 m

According to the formula of the projectile fired horizontally from a certain height,

x = u ×√(2h/g)

20.8 = u × √(2×10.4/9.8)

20.8 = u × 1.456

u = 20.8/1.456 = 14.28 m/s

Thus,the horizontal velocity with which the Cannonball was launched is 14.28m/s .

Learn more about displacement here :

brainly.com/question/4320329

#SPJ13

Answer:

a = (V2 - V1) / t     average acceleration between points 1 & 2

V2 = speed at bottom = -4.8 m/s

V1 = 4.8 m/s     speed when thrown, choosing upwards as positive

a = (-4.8 - 4.8) / .98       time upwards = time downwards

a = -9.6 m/s / .98 s

a = -9.8 m/s^2

Winds blow from 30° latitude in both hemispheres almost to the equator as trade winds. Option C.

This phenomenon is called the Coriolis effect and is the reason why trade winds blow westward in both the northern and southern hemispheres. Trade winds are found about 30 degrees north and south of the equator. Trade winds can be defined as winds blowing north from the northeast toward the equator.

From the southeast hemisphere or southern hemisphere. Also known as the tropical easterly wind it is known for its consistent strength and direction. The driving force of atmospheric circulation is the energy of the sun, which heats the atmosphere to varying degrees at the equator. All this motion is driven by sunlight which is absorbed and re-radiated by the Earth's surface and rotation.

Learn more about The equator here:-https://brainly.com/question/16876469

#SPJ1

Answer:

faster

Explanation:

With an increase in temperature, the particles gain kinetic energy and move faster. The actual average speed of the particles depends on their mass as well as the temperature – heavier particles move more slowly than lighter ones at the same temperature

educationvicgovau

In asexual reproduction, the number of chromosomes is constant between the parent and the children, and because all of the offspring share a similar morphology, they are referred to as clones.

To learn more about :  Asexual reproduction,

Ref : https://brainly.com/question/839307

#SPJ13

Answer:Using models, such as electronic simulations, physical models, or drawings, students will learn that genes are located in the chromosomes of cells and each chromosome pair contains two variants of each gene. Students will need to make distinctions between chromosomes and genes and understand the connections between them. DNA will be introduced in high school. Students will learn that chromosomes are the genetic material that is found in the nucleus of the cell and that chromosomes are made up of genes. They will also learn that each gene chiefly controls the production of specific proteins, which in turn affect the traits of the individual.

Students should be given opportunities to use student-developed conceptual models to visualize how a mutation of genetic material could have positive, negative, or neutral impact on the expression of traits in organisms. Emphasis in this unit is on conceptual understanding that mutations of the genetic material may result in making different proteins; therefore, models and activities that focus on the expression of genetic traits, rather than on the molecular-level mechanisms for protein synthesis or specific types of mutations, are important for this unit of study. For example, models that assign genetic information to specific segments of model chromosomes could be used. Students could add, remove, or exchange genes located on the chromosomes and see that changing or altering a gene can result in a change in gene expression (proteins and therefore traits).

Students will continue this unit of study by describing two of the most common sources of genetic variation, sexual and asexual reproduction. Students will be able to show that in sexual reproduction, each parent contributes half of the genes acquired by offspring, whereas in asexual reproduction, a single parent contributes the genetic makeup of offspring. Using models such as Punnett squares, diagrams, and simulations, students will describe the cause-and-effect relationship between gene transmission from parents(s) to offspring and the resulting genetic variation. Using symbols to represent the two alleles of a gene, one acquired from each parent, students can use Punnett squares to model how sexual reproduction results in offspring that may or may not have a genetic makeup that is different from either parent. Students can observe the same mixing of genetic information using colored counters or electronic simulations. Using other models, students can show that asexual reproduction results in offspring with the same combination of genetic information as the parents.

Students can summarize the numerical data they collect during these activities as part of their description of why asexual reproduction results in offspring with identical genetic combinations and sexual reproduction results in offspring with genetic variations. As a culmination of this unit of study, students could make multimedia presentations to demonstrate their understanding of the key concepts. Students could participate in a short research project and cite the specific textual evidence used to support the analysis of any scientific information they gather. They could integrate quantitative or technical information as part of their presentation. For example, students can take data collected during investigations of genetic mutations and provide a narrative description of their results. They could use data collected during their investigation of sexual and asexual reproduction. They could also include diagrams, graphs, or tables to clarify their data.

• Cite specific textual evidence to support analysis of science and technical texts about structural changes to genes (mutations) located on chromosomes that may affect proteins and may result in harmful, beneficial, or neutral effects to the structure and function of the organism.

• Determine the meaning of symbols, key terms, and other domain-specific phrases as they are used to describe why structural changes to genes (mutations) located on chromosomes may affect proteins and may result in harmful, beneficial, or neutral effects to the structure and function of the organism.

• Integrate quantitative or technical information about why structural changes to genes (mutations) located on chromosomes may affect proteins and may result in harmful, beneficial, or neutral effects to the structure and function of the organism that is expressed in words with a version of that information expressed visually in a flowchart, diagram, model, graph, or table.

• Include multimedia components and visual displays in presentations about structural changes to genes (mutations) located on

Explanation:

As a result, it stands to reason that the speed of sound in air and other gases should be proportional to the square root of temperature. While not insignificant, this is not a significant dependence. The speed of sound at 0°C is 331 m/s, while at 20.0 °C it is 340m/s, a 4% increase.

Time interval taken for x to hear the first  =  660-330/340

 =330/340 = .97 sec

time interval taken for x to hear second echo sounds = 660+330 / 340

          = 2.91 sec

interval taken for x to hear the first and second echo sounds = 2.91 -.97

 = 1.94 sec.

speed of sound = 340 m /s..

Time interval taken for x to hear the first  =  660-330/340

 =330/340 = .97 sec

time interval taken for x to hear second echo sounds = 660+330 / 340

          = 2.91 sec

interval taken for x to hear the first and second echo sounds = 2.91 -.97

 = 1.94 sec.

To learn more about :  Speed of sound

Ref : https://brainly.com/question/14534670

#SPJ13

Answer: Each time you switch to a higher power, the depth of focus is reduced. Therefore a smaller part of the specimen is in focus at higher power. The amount of light transmitted to your eye is greatest at the low power.

Explanation:

The final velocity of the man would be 2.11 m/s in the opposite direction of the motion.

Information provided,

Mass of the man [M] = 36 kg

Mass of the ball [m] = 0.548 kg

Speed of the ball [v] = 15.8 m/s

As of, the conservation of the momentum

MV + mv = 0

[36 × V] + [0.548 × 15.8] = 0

36V = -8.6584

V = -0.2405 m/s

The sign shows that the direction of the man is opposite to the direction of the ball.

After rebounded the direction of the ball would change

MV + m[-v] = [m+M] × [tex]V_{f}[/tex]

MV - mv = [m+M] × [tex]V_{f}[/tex]

[36 × -0.2405] - [0.548 × 15.8] = [36 + 0.548] × [tex]V_{f}[/tex]

-8.658 - 8.6584 = 36.548 × [tex]V_{f}[/tex]

-17.3164 = 36.548 × [tex]V_{f}[/tex]

[tex]V_{f}[/tex] = -2.1106 m/s

The final velocity of the man would be 2.11 m/s in the opposite direction of the motion.

Let's check similar question on Velocity : https://brainly.com/question/7538238

If silicon-28 becomes silicon-29, we know that it gained a neutron and not a proton because all isotopes have same atomic number but different atomic mass.

Number of protons = Atomic number

So, even though the isotopes of silicon differ, the atomic number is same for all the isotopes. So number of protons is neither gained nor lost in different isotopes of the same element.  

Atomic mass = Number of Protons + Number of Neutrons

Number of Neutrons = Atomic mass - Number of  Protons

Since the atomic mass differs for different isotopes, the number of neutrons varies in different isotopes.

Therefore, if silicon-28 becomes silicon-29, we know that it gained a neutron and not a proton because all isotopes have same atomic number but different atomic mass.

To know more about isotopes of silicon

https://brainly.com/question/14505564

#SPJ1

Velocity is the speed as well as direction of motion of an object. In other words, one can say that the velocity is the rate of change of position of an object.

Velocity is the dimensional speed of a moving artifact as an inkling of its rate of change in position as observed from a specific frame of reference and measured by a specific time standard.

Speed is the rate at which an object moves along a path in time, whereas velocity is the rate and direction of movement. In other words, velocity is a vector, whereas speed is a scalar value.

The velocity of an object is its speed as well as its direction of motion. In other words, velocity is the rate at which an object's position changes.

Thus, this way, the velocity and position of object relates with each other.

For more details regarding velocity, visit:

https://brainly.com/question/18084516

#SPJ1

Minimum force human must exert to so that 14 kg mass do not accelerate downward and hit on head is 98 N. Tension in the string is 140 N.

What is acceleration?

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is acceleration.

Given in the question two masses each of mass 4 kg and 14 kg so net force due gravity on the masses is 98 N, because two mass is hanging one going up one down so resultant force is 98 N. So minimum force required so that 14 kg do not hit on head is 98 N.

Tension on the string is equal to 140 N    

Minimum force human must exert to so that 14 kg mass do not accelerate downward and hit on head is 98 N. Tension in the string is 140 N.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ1

3-6 seconds time interval is the object slowing down.

The correct option is C.

The time interval is the span of time among two specified times. To put it another way, it is the amount of time that has passed between the event's start and finish.

The time interval is the length of time that the aim uses to gather data and determine values. The critical overview can be one or more seconds, minutes, hours, days, weeks, or months. The period must be greater than zero and positive. When providing minutes, the amount of minutes must divide evenly by 60.

To know more about Time interval visit:

https://brainly.com/question/28238258

#SPJ13

The complete question is -

During which time interval is the object slowing down ?

a- 8-10 seconds

b- 6-8 seconds

c- 3-6 seconds

d- 0-3 seconds

carbon atomic mass Equals m2

neutron mass = M,

as mg 12m1 = the speed of the neutron following a collision

m1 - m2 / m1 + m2 * u1 = v1

= [(-12m1+m1) / 13m1] * u1

= [(-12+1) 13] * u1

v1 = -11/13*u1

Neutron speed equals 11/13 starting speed.

Response: 11/13

A nuclear reactor is a device used to start and regulate nuclear chain reactions involving fission or nuclear fusion. Nuclear reactors are used in nuclear power plants to produce electricity and in nuclear propulsion for ships.

The neutron, symbol n or n0, is a subatomic particle with a neutral charge and slightly more mass than a proton. Atomic nuclei consist of protons and neutrons.

The element with atomic number 6 carbon has small, straightforward atoms. Six positively charged protons make up the nucleus, and there are six electrons outside the nucleus that are split between two shells.

To know more about nuclear reactor, click on the link below:

https://brainly.com/question/23160065

#SPJ4

Centripetal force needed to keep  the 2 kg sack of flour (a) in a circle of radius 4 meters is 8 N and (b) in a circle of radius 8 meters is 4 N.

Centripetal force can be defined as a necessary force acting of a body moving in circular or curved path in the direction of inwards towards a fixed point. Due to having both magnitude and direction, it is a vector quantity. SI unit of centripetal force is Newton (N).

We know that.

centripetal force = [tex]\frac{mv^{2} }{r}[/tex]

Where,

m = mass of the moving object.

v = speed of the moving object.

r = radius of the circular path.

Given,

Mass of the sack of flour = m= 2 kg.

Speed of the moving object = v = 4 m/s.

Now for condition (a),

When, radius of the circular path = r = 4 meter.

Required centripetal force =  [tex]\frac{mv^{2} }{r}[/tex] = [tex]\frac{2*4*4}{4}[/tex] N = 8 N.

And, for condition (b),

When, radius of the circular path = r = 8 meter.

Required centripetal force =  [tex]\frac{mv^{2} }{r}[/tex] = [tex]\frac{2*4*4}{8}[/tex] N =  4 N.

So, required centripetal force for conditions (a) and (b) respectively 8N and 4 N.

Learn more about centripetal fore here:

https://brainly.com/question/14249440

#SPJ1  

The Earth's rotation produces an outward centrifugal force that is greater at equatorial latitudes than at polar latitudes.

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is acceleration.

The net acceleration that objects get as a result of the combined action of gravity and centrifugal force is known as the Earth's gravity, or g. It is a vector quantity whose strength or magnitude is determined by the norm and whose direction correlates with a plumb bob.

The Earth's rotation produces an outward centrifugal force that is greater at equatorial latitudes than at polar latitudes. This lowers the apparent downward acceleration of falling objects by somewhat counteracting the Earth's gravity, up to a maximum of 0.3% at the Equator.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ1

the angle of the road such that the alleviation is 10.6 meters and the distance traveled is 31 meters is 20°.

what are trigonometric ratios?

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle. The ratios of sides of a right-angled triangle with respect to any of its acute angles are known as the trigonometric ratios of that particular angle.

given:

the total length you have driven is 31 m

elevation has increased by 10.6 m

if we will image the architecture of the structure that will be formed, we will see that the after joining the highest point perpendicularly downward we end up with a right-angled triangle.

if we wish to find the alleviation of the road, we can simply use trigonometric ratios.

using the sine trigonometric ratio we get,

sin (angle of alleviation) = perpendicular distance/distance travelled by the car

sin (angle of alleviation) = 10.6/31

sin (angle of alleviation) = 0.341

sin (angle of alleviation) = 19.93°

therefore, the angle of the road such that the alleviation is 10.6 meters and the distance traveled is 31 meters is 20°.

learn more about trigonometric ratio here:

https://brainly.com/question/17081568

#SPJ13

The force Jake feels from Angela must be equal to the force he applied which is 20 N.

Newton's third law of motion states that for every action, there is an equal and opposite reaction. In other words, action and reaction are equal and opposite.

Mathematically, this law is written as;

Fa = Fb

where;

If Jake pushes Angela with 20 N of force, then Angle must react with equal and opposite force of 20 N.

Learn more about Newton's third law of motion here: https://brainly.com/question/23772134

#SPJ1

If you start driving north for 16 miles, turn right, and drive east for another 30 miles. At the end of driving, then your straight line distance from your starting would be displacement, therefore the correct answer is option C.

Displacement is a vector quantity. This indicates that it has both a direction and a magnitude and that it is visually represented as an arrow that points from the starting position to the ending position.

As given in the problem statement if you start driving north for 16 miles, turn right, and drive east for another 30 miles.

Displacement is the shortest straight line distance between the initial and the final point.

Thus, the correct answer is option C.

Learn more about displacement here, refer to the link ;

https://brainly.com/question/10919017

#SPJ1

The acceleration of the ball when it is moving up, at the highest point and when moving down is always constant and in downward direction.

When a ball is thrown upward, its acceleration is always constant.

When a ball is thrown, it is under the influence of gravity, the acceleration working on the ball is due to earth.

The acceleration given by the earth is called Acceleration due to gravity. When the ball is going upward. The acceleration is opposite to the motion of the ball. When the ball is moving downwards, the acceleration is in the direction of the motion of the ball.

When the ball is at highest point, the acceleration is still downwards.

Throughout the motion, the acceleration is constant in terms of direction as well as magnitude.

To know more about acceleration, visit,

https://brainly.com/question/605631

#SPJ4

The resultant vector for A + B is 13.5, for B + A is 13.5, for C + D is 6.1 and for A + B + C + D is 13.55

When 2 vectors are at an angle with each other,

R² = A² + B² + 2ABcosθ

A = 10

B = 4

C = 5

D = 5

1 ) For A + B,

θ = 35°

R² = 10² + 4² + ( 2 * 10 * 4 * cos 35° )

R² = 100 + 16 + 65.6

R² = 181.6

R = 13.5

2 ) For B + A,

The resultant vector will be the same as A + B,

R = 13.5

3 ) For C + D,

θ = 105°

R² = 5² + 5² + ( 2 * 5 * 5 * cos 105° )

R² = 25 + 25 - 13

R² = 37

R = 6.1

4 ) For A + B + C + D,

Resolving A into its X and Y components,

A[tex]_{x}[/tex] = A cos 35°

A[tex]_{x}[/tex] = 10 * 0.82

A[tex]_{x}[/tex] = 8.2

A[tex]_{y}[/tex] = A sin 35°

A[tex]_{y}[/tex] = 10 * 0.57

A[tex]_{y}[/tex] = 5.7

Resolving C into its X and Y components,

C[tex]_{x}[/tex] = C cos 75°

C[tex]_{x}[/tex] = 5 * 0.26

C[tex]_{x}[/tex] = 1.3

C[tex]_{y}[/tex] = A sin 75°

C[tex]_{y}[/tex] = 5 * 0.97

C[tex]_{y}[/tex] = 4.85

X = A[tex]_{x}[/tex] + B + C[tex]_{x}[/tex] - D

X = 8.2 + 4 + 1.3 - 5

X = 8.5

Y = A[tex]_{y}[/tex] + C[tex]_{y}[/tex]

Y = 5.7 + 4.85

Y = 10.55

R² = X² + Y²

R² = 8.5² + 10.55²

R² = 72.25 + 111.3

R = √ 183.55

R = 13.55

Therefore, the resultant vector for,

To know more about resultant vector

https://brainly.com/question/28188107

#SPJ1

The weight of the truck that cause the ferry sinks an additional 3.8 cm is equal to the weight of the displaced water, that is 9120 N

According to the Archimedes Principle, the buoyant force is equal to the weight of the water displaced by the boat.

Using the formula:

F = ρ . g. V

Where:

F = buoyant force

ρ  = mass density of the fluid

g = acceleration due to gravity

V = volume of the displaced water

Assume that the mass density of water is 1000 kg/m³. Hence,

F = 1000 . 10. (4 x 6 x 0.038)  = 9120 N

The truck's weight is equal to the weight of displaced water, hence it is 9120 N

Learn more about buoyant force here:

https://brainly.com/question/11884584

#SPJ4

The force of friction acted to lift the car is 1500N.

The push or pull on a mass-containing item changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

We are given that,

The mass of the car = m = 1500kg

The initial speed of the car = Vin = 20m/s

The final speed of the car  = Vf = 30m/s

The total time taken is = t = 10 second

Therefore , to calculate the force that acted on the car is by the equation i.e.

Force = (change in momentum)/(time)

net F = [m (Vf -Vin)]/t

net F = [1500kg(30m/s -20m/s)]/10sec

net F = 1500N

Since, the total force of friction to slow the car will be 1500N

To know more about force

https://brainly.com/question/263506

#SPJ1