how is vapor pressure related to temperature? what happens to the vapor pressure of a substance when the temperature is increased? select all that apply.

Answers

Answer 1

Vapor pressure is indeed related to temperature. The relationship between vapor pressure and temperature can be described by the following statements:

Vapor pressure generally increases with an increase in temperature.Vapor pressure decreases with a decrease in temperature.There is a direct proportionality between vapor pressure and temperature.As temperature rises, more molecules of a substance have enough energy to escape from the liquid phase and enter the vapor phase, leading to an increase in vapor pressure.Increasing the temperature causes an increase in the average kinetic energy of the molecules, which results in a higher fraction of molecules having sufficient energy to escape from the liquid phase, leading to an increase in vapor pressure.

To know more about pressure visit :

https://brainly.com/question/30673967

#SPJ11


Related Questions

Research about ECG:
1. Why it's done?
2. Person's contributed about ECG?
3. Study about P,Q,R,S and T five delfection

Answers

1 Electrocardiogram (ECG) is an essential and painless test to measure the electrical activity of a heart to reveal its functioning. 2 J. Arthur and Thomas Lewis  3 The P tell about heart's upper chamber and  QRS complex represents the electrical activity T wave represents the electrical recovery

It uses electrodes that are attached to the chest, arms, and legs to collect data, and the results are graphically displayed on a screen. ECG test can show the rhythm of the heart, the electrical activity of each beat, and the size and position of the heart chambers.

There are many reasons why someone would need to get an ECG test. The commonest reasons include but are not limited to: Chest pain, palpitations, shortness of breath, high blood pressure, and history of heart disease. An ECG test can help detect heart problems before more severe symptoms appear, and it's essential in monitoring the heart's response to medication and therapy.

Over the years, several people have contributed to the development of ECG technology. It was first introduced in 1902 by a Dutch physiologist named Willem Einthoven, who used it to classify cardiac arrhythmias and heart blockages. Other contributors to the ECG technology include J. Arthur and Thomas Lewis, who were English cardiologists and Norman Holter, who created a portable monitoring device for ECGs. The P, Q, R, S, and T waves are the five deflections of an ECG wave. They represent the electrical activity of the heart during one heartbeat.

The P wave represents the electrical activity that starts in the heart's upper chamber, the atria, and travels down to the lower chamber, the ventricles. The QRS complex represents the electrical activity of the ventricles contracting and pushing blood out of the heart. Finally, the T wave represents the electrical recovery of the ventricles, getting ready for the next heartbeat.

Know more about Electrocardiogram here:

https://brainly.com/question/28163596

#SPJ11

Monochromatic light with a wavelength of 177.5 nm, shines on a
metal plate and ejects electrons. The electrons are observed to
leave the metal with a kinetic energy of 3 eV.
(a) Calculate the energy o

Answers

When monochromatic light with a wavelength of 177.5 nm shines on a metal plate, electrons are ejected with a kinetic energy of 3 eV. The energy of each photon can be calculated as approximately -6.4 × 10^-19 J, indicating excess kinetic energy in the ejected electrons.

The energy of a photon can be calculated using the equation E = hc/λ, where E is the energy, h is Planck's constant (6.626 × 10^-34 J∙s), c is the speed of light (3.0 × 10^8 m/s), and λ is the wavelength of the light.

Given that the wavelength of the monochromatic light is 177.5 nm (or 177.5 × 10^-9 m), we can plug these values into the equation:

E = (6.626 × 10^-34 J∙s × 3.0 × 10^8 m/s) / (177.5 × 10^-9 m)

E = 1.12 × 10^-18 J

The energy of one electron volt (eV) is equal to 1.6 × 10^-19 J. So, we can convert the kinetic energy of the electrons, which is 3 eV, into joules:

Kinetic energy in joules = 3 eV × (1.6 × 10^-19 J/eV)

Kinetic energy in joules = 4.8 × 10^-19 J

Now, we can determine the energy of each photon by comparing the energy of the ejected electrons to the energy of a single photon:

Energy of each photon = Kinetic energy of electrons - Energy required to eject electrons

Energy of each photon = 4.8 × 10^-19 J - 1.12 × 10^-18 J

Energy of each photon = -6.4 × 10^-19 J

The negative sign indicates that the electrons have excess kinetic energy beyond what is needed for ejection.

To know more about wavelength refer here:

https://brainly.com/question/31321361#

#SPJ11

Martha is viewing a distant mountain with a telescope that has a 120-cm-focal-length objective lens and an eyepiece with a 2.0 cm focal length. She sees a bird that's 42 m distant and wants to observe it. To do so, she has to refocus the telescope.
Part A
By how far must she move the eyepiece in order to focus on the bird?

Answers

To determine how far Martha must move the eyepiece in order to focus on the bird, we can use the lens formula.

To focus on the bird, Martha needs to adjust the eyepiece by a distance that brings the final image distance (v) to 50 m. The exact calculation for the movement of the eyepiece will depend on the specific values of u and the corresponding value of v.To determine the distance by which Martha must move the eyepiece in order to focus on the bird, we need to calculate the change in the position of the eyepiece.The change in the position of the eyepiece can be found by subtracting the initial position of the eyepiece from the final position.

To know more about eyepiece visit :

https://brainly.com/question/24547418

#SPJ11

You need to put a 50kg box in the back of a truck. (5points) Calculate how much force you have to do if you lift it up vertically (10 points) How much force do you have to do if you push it up a 25 degree ramp? You have to show your calculations to find the answers to receive credit.

Answers

The force required to lift the 50kg box vertically is approximately 490 Newtons. The force required to push the 50kg box up a 25-degree ramp is approximately 202 Newtons.

To calculate the force required to lift the 50kg box vertically, we can use the formula:

Force = mass * acceleration due to gravity

Where:

mass = 50kg

acceleration due to gravity ≈ 9.8 m/s²

Using the given values, we can calculate the force required to lift the box vertically:

Force = 50kg * 9.8 m/s²

Force ≈ 490 Newtons

To calculate the force required to push the 50kg box up a 25-degree ramp, we need to consider the force required to overcome the weight component along the ramp.

The weight component along the ramp can be calculated using the formula:

Weight component along the ramp = mass * acceleration due to gravity * sin(theta)

Where:

mass = 50kg

acceleration due to gravity ≈ 9.8 m/s²

theta = 25 degrees

Using the given values, we can calculate the weight component along the ramp:

Weight component along the ramp = 50kg * 9.8 m/s² * sin(25°)

Next, we need to calculate the force required to push the box up the ramp. This force can be calculated using the formula:

Force = Weight component along the ramp + force required to overcome friction (if any)

Assuming no friction, the force required to push the box up the ramp is equal to the weight component along the ramp:

Force = Weight component along the ramp

Substituting the calculated weight component along the ramp, we get:

Force ≈ 50kg * 9.8 m/s² * sin(25°)

Using a calculator, we can evaluate this expression:

Force ≈ 202 Newtons

To lift the 50kg box vertically, you would need to exert approximately 490 Newtons of force. If you push the box up a 25-degree ramp with no friction, you would need to exert approximately 202 Newtons of force.

To know more about force , visit:

https://brainly.com/question/12970081

#SPJ11

tortoise shells cats have variegated coats cause by x inactivation and are always what

Answers

Tortoise shell cats have variegated coats because of X inactivation and are always female.

Tortoiseshell cats are typically always female and have variegated coats that are the result of X-chromosome inactivation. The inactivation of one of the two X chromosomes in a female cat's cells is responsible for the mosaic coloring of its coat. Tortoiseshell cats' black and orange patches appear because of the coat's structure.

To put it another way, the genetic makeup of a tortoiseshell cat produces color differences in its coat. The cat's genes, which are inherited from its parents, determine the color and pattern of the cat's coat. Female cats have two X chromosomes, whereas male cats have one X and one Y chromosome. When a female cat is conceived, it inherits an X chromosome from each parent. When the cat's cells divide and reproduce, each cell randomly inactivates one of the X chromosomes. This inactivation of one of the chromosomes results in the expression of certain genes in certain cells. As a result, some cells produce orange fur, while others produce black fur. In tortoiseshell cats, this results in the characteristic variegated coat pattern.

To know more about Tortoise shell visit :-

https://brainly.com/question/14352999

#SPJ11

If you filled an airtight balloon at the top of a mountain, would the balloon expand or contract as you descended the mountain? Explain.

Answers

If you filled an airtight balloon at the top of a mountain, the balloon would contract as you descended the mountain. This is due to the decrease in air pressure with increasing altitude.

Air pressure decreases with increasing altitude. The atmosphere is composed of different layers of gases that create atmospheric pressure. When the altitude changes, the pressure exerted by the gases also changes. The pressure decreases as the altitude increases.

This implies that there is less air pressure at the top of a mountain than at the bottom. When you fill an airtight balloon at the top of a mountain, it will be filled with air at a lower pressure. As you descend the mountain, the air pressure rises, and the balloon will attempt to maintain equilibrium with its surroundings.

As a result, the air inside the balloon will become more compressed, and the balloon will shrink in size. This is the main answer to your question. Therefore, the balloon will contract as you descend the mountain.

To sum up, as the altitude decreases, the air pressure rises, and the air inside the balloon will compress as it attempts to reach equilibrium with the surrounding air. As a result, the balloon will contract in size as you descend the mountain.

For more information on air pressure kindly visit to

https://brainly.com/question/31755937

#SPJ11

1. What is the amount of steam needed at a temperature of (130°C) to raise the temperature of (200) g of water from (20°C) to (50) Cº inside insulating bowl?

Answers

Approximately 11.09 grams of steam (water vapor) would be needed at a temperature of 130°C to raise the

temperature

of 200 g of water from 20°C to 50°C inside the insulating bowl.

To calculate the amount of steam needed to raise the temperature of water, we can use the principle of heat transfer and the specific

heat

capacity of water. The formula for heat transfer is:

Q = m * c * ΔT

Where:

Q = heat transferred (in joules)

m = mass of the substance (in grams)

c = specific heat capacity of the substance (in joules per gram per degree Celsius)

ΔT = change in temperature (in degrees Celsius)

In this case, we want to find the amount of

steam (

water vapor) needed to raise the temperature of 200 g of water from 20°C to 50°C.

First, we need to calculate the heat transfer required:

Q = 200 g * c_ water * (50°C - 20°C)

The specific heat capacity of water is approximately 4.18 J/g °C.

Q = 200 g * 4.18 J/g °C. * 30°C

Q = 25080 J

Now, we need to consider the phase change of steam to water. When steam condenses, it releases a specific amount of heat known as the latent heat of

vaporization

. For water, the latent heat of vaporization is approximately 2260 J/g.

The amount of steam needed can be calculated using the formula:

Q = m_ steam * latent heat of vaporization

25080 J = m_ steam * 2260 J/g

Solving for m_ steam:

m _steam = 25080 J / 2260 J/g

m _steam ≈ 11.09 g

Therefore, approximately 11.09 grams of steam (water vapor) would be needed at a temperature of 130°C to raise the temperature of 200 g of water from 20°C to 50°C inside the

insulating

bowl.

To know more about

temperature

visit:

https://brainly.com/question/27944554

#SPJ11

A wheel rotates through an angle 250 rad in 4.50 s , at which
time its angular velocity reaches 115 rad/s.
a) Calculate the angular velocity at the start of this 250 rad
rotation assuming the angular

Answers

a) The angular velocity at the start of the 250 rad rotation, assuming constant angular acceleration, is approximately 11.11 rad/s.

b) The angular acceleration is approximately 25.56 rad/s².

a) To find the angular velocity at the start of the 250 rad rotation, assuming constant angular acceleration, we can use the equation:

ω² = ω₀² + 2αθ

where ω represents the final angular velocity, ω₀ represents the initial angular velocity, α represents the angular acceleration, and θ represents the angle of rotation.

Given that ω = 115 rad/s, θ = 250 rad, and ω₀ is the unknown, we can rearrange the equation to solve for ω₀:

ω₀² = ω² - 2αθ

Plugging in the values, we have:

ω₀² = (115)² - 2α(250)

Since the angular acceleration is constant, we can find it by dividing the change in angular velocity by the change in time:

α = (ω - ω₀) / t

Substituting this expression for α into the previous equation, we get:

ω₀² = (115)² - 2[(ω - ω₀) / t](250)

Simplifying the equation, we can solve for ω₀:

ω₀ = (115)² - 500ω / 4.5

Solving this equation numerically, we find ω₀ ≈ 11.11 rad/s.

b) To calculate the angular acceleration, we can use the equation:

α = (ω - ω₀) / t

Plugging in the known values, we have:

α = (115 - 11.11) / 4.5

Solving this equation numerically, we find α ≈ 25.56 rad/s².

Therefore, the angular velocity at the start of the 250 rad rotation, assuming constant angular acceleration, is approximately 11.11 rad/s, and the angular acceleration is approximately 25.56 rad/s².

To know more about angular velocity refer here:

https://brainly.com/question/30237820#

#SPJ11

Complete Question:

A wheel rotates through an angle 250 rad in 4.50 s , at which time its angular velocity reaches 115 rad/s.

a) Calculate the angular velocity at the start of this 250 rad rotation assuming the angular acceleration is constant.

b) Calculate the angular acceleration.

Question 7 A short needle, length 5.5 cm, stands on its end on the axis of a spherical mirror. It is a distance 22 cm from the mirror. Part A What is the length of the image of the needle if the focal

Answers

When the focal length of the mirror is 10 cm, the length of the image of the 5.5 cm needle standing 22 cm away from the mirror is approximately 1.72 cm, and the image is inverted.

To determine the length of the image of the needle when the focal length of the mirror is 10 cm, we can apply the mirror formula and magnification formula.

The mirror formula is given by:

1/f = 1/v - 1/u

Where:

f = focal length of the mirror

v = image distance

u = object distance

In this case, the object distance (u) is 22 cm, and the focal length (f) is 10 cm.

Using the mirror formula, we can calculate the image distance (v):

1/10 = 1/v - 1/22

Simplifying the equation, we get:

1/v = 1/10 + 1/22

To find the value of v, we take the reciprocal of both sides:

v = 1 / (1/10 + 1/22)

v = 6.875 cm

Now, we can calculate the magnification (m) using the formula:

m = -v / u

Substituting the values, we get:

m = -(6.875 cm) / (22 cm)

m ≈ -0.3125

The negative sign indicates that the image is inverted.

Finally, to find the length of the image of the needle, we multiply the magnification by the length of the object:

Length of the image = |m| * Length of the object

Length of the image = 0.3125 * 5.5 cm

Length of the image ≈ 1.72 cm

Therefore, when the focal length of the mirror is 10 cm, the length of the image of the needle is approximately 1.72 cm.

To know more about mirror refer here:

https://brainly.com/question/9864798#

#SPJ11

Complete question:

A short needle, with a length of 5.5 cm, stands on its end on the axis of a spherical mirror. It is a distance of 22 cm from the mirror. Part A: What is the length of the image of the needle if the focal length of the mirror is 10 cm?

how fast must a plane fly along the earth's equator so that the sun stands still relative to the passengers? the earth's radius is 6400 km.

Answers

Answer: 465.1

To calculate the speed at which a plane must fly along the Earth's equator for the sun to appear stationary relative to the passengers, we need to consider the rotation of the Earth.

The Earth completes one full rotation in approximately 24 hours. Therefore, in 24 hours, a point on the equator travels the full circumference of a circle with a radius equal to the Earth's radius.

The formula for the circumference of a circle is given by:

Circumference = 2 * π * radius

Substituting the Earth's radius (6400 km) into the formula, we have:

Circumference = 2 * π * 6400 km

To find the speed required for the sun to appear stationary, we divide the circumference by the time it takes for one full rotation (24 hours or 86400 seconds):

Speed = Circumference / Time

Speed = (2 * π * 6400 km) / 86400 s

Simplifying the equation:

Speed ≈ 465.1 m/s

Therefore, the plane must fly at approximately 465.1 meters per second (m/s) along the Earth's equator for the sun to appear stationary relative to the passengers.

The earth rotates once every 24 hours, which means that its equator moves at a rate of 40,000 kilometers (24,855 miles) per day, or about 1670 kilometers per hour. Therefore, if an airplane flies at the same speed as the earth's rotation, the sun will appear to be stationary relative to the passengers.

To maintain a stationary position relative to the sun, an airplane would have to fly at a speed equal to the rotational velocity of the earth, which is around 1670 kilometers per hour. This is because the sun appears to be stationary relative to the earth because both the sun and the earth are moving in a circle at the same rate.

to know more about speed visit:

https://brainly.com/question/17661499

#SPJ11

moving mirror m2 of a michelson interferometer a distance of 70 μm causes 550 bright-dark-bright fringe shifts.

Answers

The number of fringe shifts can be determined using the formula:N = δm/λwhere N is the number of fringe shifts, δm is the distance the mirror was moved, and λ is the wavelength of light.In this case, we can calculate the wavelength of light as follows:λ = δm/N = 70 × 10^-6 m / (550 / 2) = 0.0002545 Therefore, the wavelength of light is 0.0002545 m or 254.5 nm.

A Michelson interferometer is an optical instrument that is used to measure the wavelength of light, small displacements, and refractive index changes of a medium. It was first created by Albert Abraham Michelson in the year 1881. The apparatus comprises a beam splitter, two mirrors, and a detector. A laser beam is split into two by a beam splitter, and each beam is reflected back to the beam splitter by a mirror. At the beam splitter, the two beams are recombined to produce an interference pattern, which is then detected by the detector. A change in the path length of one of the beams changes the interference pattern. If the mirror M2 of a Michelson interferometer is moved by a distance of 70 µm, it will cause 550 bright-dark-bright fringe shifts.Each fringe corresponds to half a wavelength, and so if the mirror is moved by a distance of λ/2, it will result in a bright-dark fringe shift. The number of fringe shifts can be determined using the formula:N = δm/λwhere N is the number of fringe shifts, δm is the distance the mirror was moved, and λ is the wavelength of light.In this case, we can calculate the wavelength of light as follows:λ = δm/N = 70 × 10^-6 m / (550 / 2) = 0.0002545 Therefore, the wavelength of light is 0.0002545 m or 254.5 nm.

To know more about wavelength visit :

brainly.com/question/31143857

#SPJ11

what is the net dc gain of a 4th-order butterworth non-unity-gain sallen-key filter? give your answer to 4 significant figures.

Answers

The net DC gain of a 4th-order Butterworth non-unity-gain Sallen-Key filter is 1.414.

The net DC gain of a 4th-order Butterworth non-unity-gain Sallen-Key filter is 1.414. Please note that the net DC gain of a Sallen-Key filter depends on the specific values of the resistors and capacitors used in the circuit design. The value of 1.414 represents the approximate gain of a Butterworth filter, which provides a flat response in the passband and a -3 dB cutoff frequency at the corner frequency. The net DC gain of a 4th-order Butterworth non-unity-gain Sallen-Key filter is 1.0000. Since it is a non-unity-gain filter, the net DC gain will be 1, meaning there is no amplification or attenuation of the input signal at DC (zero frequency).

To learn more about Sallen-Key, https://brainly.com/question/31984256

#SPJ11

The gravitational force between two spherical celestial bodies, one of mass 7x1012 kg and the other of mass 8x1020 kg, has a magnitude of 4×107 N. ▼ Part A How far apart are the two bodies? Express

Answers

The two celestial bodies are approximately 1.94 × 10^10 meters apart from each other.

To calculate the distance between two celestial bodies based on the gravitational force between them, we can use Newton's law of universal gravitation:

F = G * (m1 * m2) / r^2,

where F is the gravitational force, G is the gravitational constant (approximately 6.67430 × 10^-11 N m^2/kg^2), m1 and m2 are the masses of the bodies, and r is the distance between the bodies.

Given:

Mass of the first body (m1): 7 × 10^12 kg

Mass of the second body (m2): 8 × 10^20 kg

Magnitude of the gravitational force (F): 4 × 10^7 N

We can rearrange the formula to solve for the distance (r):

r = sqrt((G * (m1 * m2)) / F).

Substituting the given values:

r = sqrt((6.67430 × 10^-11 N m^2/kg^2 * (7 × 10^12 kg * 8 × 10^20 kg)) / (4 × 10^7 N)).

Evaluating the expression, we find:

r ≈ 1.94 × 10^10 meters.

Therefore, the two celestial bodies are approximately 1.94 × 10^10 meters apart.

To know more about bodies visit:

https://brainly.com/question/31189932

#SPJ11

the energy used for metabolic processes reduces the efficiency of secondary productivity. TRUE OR FALSE?

Answers

The energy used for metabolic processes reduces the efficiency of secondary productivity, the given statement is true because secondary productivity represents the energy that is transferred between different trophic levels.

Trophic levels are hierarchical levels in an ecosystem, comprising of producers, herbivores, primary carnivores, and secondary carnivores. These levels are dependent on the energy flow that passes from one level to another. The primary productivity is the rate of formation of organic matter by the producers and their conversion into chemical energy. The secondary productivity is defined as the energy stored in the herbivores' biomass that feeds on the primary producers.

The energy available for the organisms at higher trophic levels decreases due to loss of energy at each trophic level. The loss of energy occurs due to the heat generated in metabolic processes, which is not utilized. Hence, the energy used for metabolic processes reduces the efficiency of secondary productivity. So therefore, the energy used for metabolic processes reduces the efficiency of secondary productivity, the statement is correct.

Learn more about metabolic processes at :

https://brainly.com/question/28549453

#SPJ11

The given statement "the energy used for metabolic processes reduces the efficiency of secondary productivity" is True.

Secondary productivity is the energy stored by heterotrophs in the ecosystem. Secondary productivity represents the efficiency with which heterotrophs convert the food that they consume into new biomass. It is calculated as the difference between the gross production of organic matter by photosynthesis or chemosynthesis and the energy used by the primary producers during cellular respiration.

Secondary productivity is expressed in terms of energy or biomass. In order to carry out metabolic processes, heterotrophs consume a portion of the energy that they obtain from their food. As a result, secondary productivity is reduced in comparison to primary productivity, since a portion of the energy obtained is lost during metabolic processes.

Thus, the statement "the energy used for metabolic processes reduces the efficiency of secondary productivity" is true.

To know more about secondary productivity, refer

https://brainly.com/question/28163538

#SPJ11

The average distance between Earth and the Sun is 1.5 x 1011m.
(a) Calculate the average speed of Earth in its orbit (assumed to be circular) in meters per second. m/s
(b) What is this speed in miles per hour? mph

Answers

The average speed of the earth in its orbit is 2.98 x 104 m/s or 6.67 x 104 mph.

The average distance between the earth and the sun is 1.5 x 1011m.

This can be done using the formula for the speed of an object in circular motion:Speed = distance/time

For the earth's orbit around the sun, we know that the distance covered is the circumference of the circle with radius equal to the average distance between the earth and the sun.

Circumference = 2πr, where r is the radius of the circle.

So the distance covered by the earth in one orbit is:Distance covered = 2πrwhere r = 1.5 x 1011mTherefore, distance covered = 2π(1.5 x 1011)m = 9.42 x 1011m

We also know that the time taken for one complete orbit is one year or 365 days, or 3.154 x 107 seconds.

Therefore:Time taken for one orbit = 3.154 x 107 seconds

Now we can use the formula for speed to find the average speed of the earth in its orbit:

Speed = distance/timeSpeed = (9.42 x 1011m)/(3.154 x 107s)Speed = 2.98 x 104m/s

Therefore, the average speed of the earth in its orbit is 2.98 x 104m/s.

Convert m/s to miles/hour

We can convert m/s to miles/hour by using the conversion factor: 1 mile = 1609.34m and 1 hour = 3600s

Therefore, 1 mile/hour = 1609.34/3600 m/s = 0.44704 m/s

So to convert the speed of the earth from m/s to miles/hour, we need to divide by 0.44704:

Speed in miles/hour = (2.98 x 104 m/s)/0.44704Speed in miles/hour = 6.67 x 104 mph

Therefore, the average speed of the earth in its orbit is 2.98 x 104 m/s or 6.67 x 104 mph.

Learn more about average speed

brainly.com/question/6280317

#SPJ11

If you raise an object to a greater height, you are definitely increasing its a. kinetic energy b. thermal energy c. gravitational potential energy d. heat e. chemical energy

Answers

If you raise an object to a greater height, you are definitely increasing its gravitational potential energy (option c).

What is gravitational potential energy? Gravitational potential energy is the energy that an object has due to its position in a gravitational field. When an object is raised to a certain height, it gains potential energy, which is stored and can be converted into other forms of energy.

The formula for gravitational potential energy is:PEg = mgh

Where m is the object's mass, g is the acceleration due to gravity, and h is the height that the object is raised.

The other options mentioned in the question, such as kinetic energy, thermal energy, heat, and chemical energy, are not affected when an object is raised to a greater height.

Therefore, the correct answer is (c) gravitational potential energy.

Learn more about gravitational potential energy at https://brainly.com/question/3910603

#SPJ11

the block is subjected to a force v that produces a deflection of δ = 0.12 cm . what is the applied force?

Answers

Given that the block is subjected to a force v that produces a deflection of δ = 0.12 cm. We are to find the applied force.Let the force applied be F. Therefore, Hooke's law can be expressed as;F=kδ,where F is the force appliedk is the spring constantδ is the deflection.

The spring constant k, is the proportionality constant between the force applied and the elongation of the spring. Mathematically, we have;

k= F/δ

= (mg)/δ

Where m is the mass of the object, g is the acceleration due to gravity, and δ is the deflection.Substituting the value of k in the expression for Hooke's law, we have;

F=kδ

= ((mg)/δ) δ

= mgThus, the force applied is F = mg.However, the mass of the block is not given. Therefore, we cannot calculate the force applied, unless the mass is given.Basically, we have used Hooke's Law in solving the problem that was given. We found out that the force applied is F=mg where m is the mass of the object, g is the acceleration due to gravity. Also note that to find the force applied, we need to be given the value of mass.

For more information on Hooke's law visit:

brainly.com/question/30379950

#SPJ11

Evaluate the following: where a = 3.0 x 1012; O 90 O 100 O 60 O 200 O 140 (ac) z 6² c= 2.7 x 10-³; b = 30
Evaluate the following: where a = 3.0 x 1012; O 90 O 100 O 60 O 200 O 140 (ac) z 6² c= 2.7

Answers

Evaluating the expression with the given values, we find that the result is 60.

Let's evaluate the expression using the given values:

ac²z + bc = (3.0 × 10¹²)(2.7 × 10⁻³)²(6²) + (30)(6)

          = (3.0 × 10¹²)(7.29 × 10⁻⁶)(36) + (30*6)

          = 7.81 × 10⁵ + 180

          = 781,180

Therefore, the result of the expression is 781,180, which is equivalent to 60 when rounded to the nearest whole number.

In mathematics, an expression is a combination of symbols, variables, constants, and mathematical operations that represents a mathematical entity or relationship. It is a way to express a mathematical idea or computation using a concise and structured notation.

An expression can consist of the following components:

1. Variables: Symbols that represent unknown quantities or values that can vary. For example, in the expression "2x + 5," the variable "x" represents an unknown value.

2. Constants: Fixed numerical values that do not change. For example, in the expression "2x + 5," the constant "2" and "5" are fixed values.

To learn more about expression here:

https://brainly.com/question/28170201

#SPJ11

When an astronaut landed on Mars, he did a quick measurement to determine the weight of objects on Mars. He dropped an object with mass 3.6 kg from the point 2 m above the ground of Mars and found that it took the object 1.0 s to reach the ground. What is the weight of this object on Mars in the unit of N? Round your answer to the nearest tenths if necessary.

Answers

The weight of the object on Mars is approximately 13.4 N. The calculation was based on the mass of the object, 3.6 kg, and the acceleration due to gravity on Mars, which is about 3.71  m/s².

To determine the weight of the object on Mars, we need to use the formula:

Weight = Mass × Acceleration due to gravity

The acceleration due to gravity on Mars is about 3.71 m/s², which is approximately 0.38 times the acceleration due to gravity on Earth (9.8 m/s²).

Given that the mass of the object is 3.6 kg, we can calculate its weight on Mars:

Weight = 3.6 kg × 3.71 m/s² ≈ 13.356 N

Rounding the answer to the nearest tenth, we get approximately 13.4 N.

The weight of the object on Mars is approximately 13.4 N. The calculation was based on the mass of the object, 3.6 kg, and the acceleration due to gravity on Mars, which is about 3.71 m/s². The object took 1.0 s to reach the ground from a height of 2 m on Mars. This measurement allows us to determine the weight of objects on Mars, which is significantly less than on Earth due to the weaker gravitational force on Mars.

To know more about gravity visit:

https://brainly.com/question/23456248

#SPJ11

what is the power of the eye when viewing an object 50.0 cm away if the lens to retina distance is 2.00 cm?

Answers

In this case, the object distance (u) is given as 50.0 cm and the lens to retina distance is given as 2.00 cm. We need to find the focal length (f) to calculate the power.

Since the eye is a complex optical system, we can consider it as a single thin lens. The lens to retina By substituting the calculated focal length (f) into the equation, we can determine the power of the eye when viewing an object 50.0 cm away.In this case, the lens to retina distance is given as 2.00 cm. Since the lens to retina distance represents the image distance (v), we need to find the object distance (u) to calculate the focal length (f).

To know more about focal visits :

https://brainly.com/question/2194024

#SPJ11

A 20 g ball of clay traveling east at 2.0 m/s collides with a 30 g ball of clay traveling 30° south of west at 1.0 m/s. What are the speed and direction of the resulting 50 g blob of clay?

Answers

The speed of the resulting 50 g blob of clay is 1.016 m/s, and its direction is eastward. The resulting 50 g blob of clay is traveling eastward at a speed of 1.016 m/s.

When solving a problem involving momentum, it is necessary to take into account both the magnitude and direction of the velocity of each object involved. Given the masses and velocities of each ball of clay, we can calculate their momenta and then use the principle of conservation of momentum to find the velocity of the resulting 50 g blob of clay. Here's how we can do it:

First, we calculate the momenta of each ball of clay using the formula p = mv, where p is the momentum, m is the mass, and v is the velocity:

Momentum of 20 g ball of clay = (0.020 kg)(2.0 m/s) = 0.040 kg m/s, eastward
Momentum of 30 g ball of clay = (0.030 kg)(1.0 m/s)(cos 30°, westward) + (0.030 kg)(1.0 m/s)(sin 30°, southward)
= 0.0260 kg m/s, westward + 0.0150 kg m/s, southward
= 0.0260 kg m/s westward - 0.0150 kg m/s northward (since southward is negative)

Note that we resolved the momentum of the 30 g ball of clay into its x- and y-components using trigonometry.

Next, we add the momenta of the two balls of clay to get the total momentum of the system:

Total momentum = 0.040 kg m/s eastward + 0.0260 kg m/s westward - 0.0150 kg m/s northward
= 0.040 kg m/s + 0.0117 kg m/s eastward

Note that we resolved the total momentum into its x- and y-components, and that the y-component is very small compared to the x-component, so we can ignore it.

Finally, we divide the total momentum by the total mass of the system (50 g = 0.050 kg) to get the velocity of the resulting 50 g blob of clay:

Velocity of 50 g blob of clay = (0.040 kg m/s + 0.0117 kg m/s)/0.050 kg
= 1.016 m/s, eastward

So the speed of the resulting 50 g blob of clay is 1.016 m/s, and its direction is eastward. Therefore, the resulting 50 g blob of clay is traveling eastward at a speed of 1.016 m/s.

Learn more about momentum here:

https://brainly.com/question/32097662

#SPJ11

The answer should be 290 atm but I am not sure how to get to
that.
IS 45%? 35. (11) What is the approximate pressure inside a pressure cooker if the water is boiling at a of 130°C? Assume no air escaped during the heating process, which started at temperature 18°C.

Answers

The approximate pressure inside the pressure cooker when the water is boiling at 130°C is 1.385 atm.

To calculate the approximate pressure inside a pressure cooker when the water is boiling at a temperature of 130°C, we can use the ideal gas law. The ideal gas law states that the pressure (P) of a gas is directly proportional to its temperature (T) when the volume (V) and the number of moles (n) are constant. The equation for the ideal gas law is:

PV = nRT

Where:

P = Pressure

V = Volume

n = Number of moles

R = Ideal gas constant

T = Temperature

In this case, we assume that the volume and the number of moles are constant. The ideal gas constant, R, is a constant value. Therefore, we can rearrange the ideal gas law equation to solve for pressure:

P = (nRT) / V

Since the volume and the number of moles are constant, we can simplify the equation to:

P = kT

Where k is a constant.

To find the approximate pressure inside the pressure cooker, we need to convert the given temperatures to Kelvin. The temperature in Kelvin is equal to the Celsius temperature plus 273.15.

Initial temperature (T1) = 18°C + 273.15 = 291.15 K

Boiling temperature (T2) = 130°C + 273.15 = 403.15 K

Now we can calculate the ratio of the pressures:

P2 / P1 = T2 / T1

Substituting the values:

P2 / P1 = 403.15 K / 291.15 K

Simplifying:

P2 = P1 * (403.15 K / 291.15 K)

Since the question states that no air escaped during the heating process, we can assume that the initial pressure (P1) is atmospheric pressure, which is approximately 1 atm.

P2 = 1 atm * (403.15 K / 291.15 K)

P2 ≈ 1.385 atm

For more such information on: pressure

https://brainly.com/question/28012687

#SPJ8

what is the speed of a wave whose frequency and wavelength are 500.0 hz and 0.500 m, respectively?

Answers

The formula that relates the speed of a wave, frequency, and wavelength is v = fλ. Where: v is the speed of the wave in meters per second (m/s)f is the frequency of the wave in hertz (Hz) λ is the wavelength of the wave in meters (m)

Therefore, the speed of a wave whose frequency and wavelength are 500.0 Hz and 0.500 m, respectively is given by: v = fλ = 500.0 Hz × 0.500 m = 250 m/s

We know that the frequency of the wave is 500.0 Hz, and the wavelength of the wave is 0.500 m. The formula that relates the speed of a wave, frequency, and wavelength is:v = fλ

Therefore, the speed of the wave is given by: v = fλ = 500.0 Hz × 0.500 m = 250 m/s

Therefore, the speed of a wave whose frequency and wavelength are 500.0 Hz and 0.500 m, respectively is 250 m/s.

To know more about wavelength, visit:

https://brainly.com/question/31143857

#SPJ11

Problem 1 A certain neutron star has five times the mass of our Sun packed into a sphere about 13 km in radius. Part A Estimate the surface gravity on this monster. Express your answer to two signific

Answers

A certain neutron star has five times the mass of our Sun packed into a sphere about 13 km in radius. The surface gravity on this monster is: g = (5 × mass of the Sun × gravitational constant) / (13,000)^2.

To estimate the surface gravity of the neutron star, we can use the formula for gravitational acceleration:

g = (GM)/r^2

where:

g is the surface gravity,

G is the gravitational constant (approximately 6.674 × 10^-11 m^3 kg^-1 s^-2),

M is the mass of the neutron star,

r is the radius of the neutron star.

Given that the neutron star has five times the mass of our Sun, we can approximate its mass as M = 5 × (mass of the Sun).

The radius of the neutron star is given as 13 km, which we convert to meters by multiplying by 1000: r = 13 × 1000 = 13,000 meters.

Substituting these values into the formula, we get:

g = (5 × mass of the Sun × gravitational constant) / (13,000)^2

To know more about "Gravitational constant" refer here:

https://brainly.com/question/21445156#

#SPJ11

need help part h,i, and j thank
you
A cylinder of volume 0.320 m³ contains 12.0 mol of neon gas at 22.8°C. Assume neon behaves as an ideal gas. (a) What is the pressure of the gas? 9.22e4 Pa (b) Find the internal energy of the gas. 4.

Answers

(h) The average kinetic energy per molecule of neon gas is 4.00 J.

(i) The root mean square speed of the neon gas molecules is 492 m/s.

(j) The average speed of the neon gas molecules is 431 m/s.

(h) The internal energy of an ideal gas is directly proportional to the temperature of the gas. The average kinetic energy per molecule can be calculated using the equation E_avg = (3/2)kT, where E_avg is the average kinetic energy, k is the Boltzmann constant (1.38 × 10⁻²³ J/K), and T is the temperature in Kelvin. Converting 22.8°C to Kelvin (22.8 + 273.15), we can calculate E_avg = (3/2)(1.38 × 10⁻²³ J/K)(295.95 K) = 4.00 J.

(i) The root mean square speed of gas molecules can be calculated using the equation v_rms = √(3kT/m), where v_rms is the root mean square speed, k is the Boltzmann constant, T is the temperature in Kelvin, and m is the molar mass of the gas. The molar mass of neon is 20.18 g/mol. Converting it to kg/mol (0.02018 kg/mol), we can calculate v_rms = √(3 × 1.38 × 10⁻²³ J/K × 295.95 K / 0.02018 kg/mol) = 492 m/s.

(j) The average speed of gas molecules can be calculated using the equation v_avg = √(8kT/πm), where v_avg is the average speed, k is the Boltzmann constant, T is the temperature in Kelvin, and m is the molar mass of the gas. Using the same values as in (i), we can calculate v_avg = √(8 × 1.38 × 10⁻²³ J/K × 295.95 K / (π × 0.02018 kg/mol)) = 431 m/s.

learn more about kinetic energy here:

https://brainly.com/question/11592500

#SPJ11

Which of the following will result in work? The force of friction acts upon a softball as she makes a headfirst dive into the third base. Earth revolving around the Sun. O All will result is zero work. O A force acts on an object 90-degree to the direction of motion. An upward force is applied to a bucket as it moves 10 m across a yard.

Answers

Out of the given scenarios, the only one that results in work is when an upward force is applied to a bucket as it moves 10 m across a yard.

Work is defined as the product of force and displacement in the direction of the force. In this case, the force applied to the bucket is in the same direction as its displacement. Therefore, work is done.

In the case of the force of friction acting upon a softball as she makes a headfirst dive into the third base, no work is done. This is because the force of friction acts in the opposite direction to the motion of the softball. As a result, the displacement and force are in different directions, leading to zero work.

Similarly, Earth revolving around the Sun does not involve any work because the force of gravity acts perpendicular to the displacement of the Earth. The force and displacement are at right angles to each other, resulting in zero work.

Only an upward force applied to a bucket as it moves 10 m across a yard will result in work, as the force and displacement are in the same direction. In the other cases, the force and displacement are either in opposite directions or at right angles, resulting in zero work.

To know more about work, visit

https://brainly.com/question/25573309

#SPJ11

The 300−μF capacitor in the figure on the right is initially charged to 100 V, the 1200−μF capacitor is uncharged, and the switches are both open. a. What is the maximum voltage to which you can charge the 1200−μF capacitor by the proper closing and opening of the two switches? b. How would you do it? Describe the sequence in which you would close and open switches and the times at which J switch is closed at t=0.

Answers

The maximum voltage to which you can charge the 1200-μF capacitor by the proper closing and opening of the two switches is 100 V.

What is the maximum voltage that can be reached by manipulating the switches?

The maximum voltage that can be reached by manipulating the switches is 100 V. Initially, the 300-μF capacitor is charged to 100 V, while the 1200-μF capacitor is uncharged. To charge the 1200-μF capacitor to its maximum voltage, we need to transfer the charge from the 300-μF capacitor to the 1200-μF capacitor.

The sequence of closing and opening switches would be as follows:

Close Switch A: This connects the charged 300-μF capacitor to the uncharged 1200-μF capacitor. The charge starts flowing from the 300-μF capacitor to the 1200-μF capacitor, equalizing the voltages on both capacitors.

Open Switch A: This isolates the 300-μF capacitor from the circuit.

Close Switch B: This connects the 1200-μF capacitor to the voltage source, allowing it to charge further.

Open Switch B: This isolates the 1200-μF capacitor from the voltage source.

By following this sequence, the maximum voltage attained by the 1200-μF capacitor will be the same as the initial voltage of the 300-μF capacitor, which is 100 V.

Learn more about capacitor charging and discharging

brainly.com/question/4049784

#SPJ11

At a certain gas station, 40% of the customers use regular gas (4₁), 35% use plus gas (4₂), and 25% use premium (43). Of those customers using regular gas, only 30% fill their tanks (event B). Of

Answers

The probability that a customer at the gas station uses regular gas and fills their tank (event A and B) is 0.12, or 12%.

At a certain gas station, 40% of the customers use regular gas, 35% use plus gas, and 25% use premium. Of those customers using regular gas, only 30% fill their tanks (event B). The probability that a customer at the gas station uses regular gas and fills their tank (event A and B) is 0.12, or 12%. The probability of event A given event B is calculated using Bayes’ theorem, which states that P(A|B) = P(A and B)/P(B). In this case, we are trying to find the probability of event A (using regular gas) given that event B (filling tank) has occurred. Therefore, P(A|B) = P(A and B)/P(B) = 0.12/0.3 = 0.4.

The theory of probability, like other theories, is a formal representation of its concepts, that is, in terms that can be considered independently of their meaning. Rules of mathematics and logic are used to manipulate these formal terms, and any results are interpreted or translated back into the problem domain.

Know more about probability, here:

https://brainly.com/question/31828911

#SPJ11

what is the power of the eye when viewing an object 25.0 cm away? assume the lens-to-retina distance is 2.00 cm , and express the answer in diopters.

Answers

The power of the eye when viewing an object 25.0 cm away and the lens-to-retina distance is 2.00 cm is 50 diopters.

A diopter is a unit of measurement of the optical power of a lens or curved mirror. The reciprocal of the focal length in meters is equal to the power of the lens or mirror in diopters. Here's the calculation:

Power of the eye = 1/focal length of the eye

Since the lens-to-retina distance is 2.00 cm, the focal length of the eye is the distance at which the eye can focus on an object. Therefore: focal length of the eye = lens-to-retina distance = 2.00 cm

To find the power of the eye, we need to use the formula:

Power of the eye = 1/focal length of the eye

Substituting the values:

focal length of the eye = 2.00 cm

Power of the eye = 1/0.02 m = 50 D

Therefore, 50 diopters is the power of the eye when viewing an object 25.0 cm away and the lens-to-retina distance is 2.00 cm.

More on optical power: https://brainly.com/question/31316146

#SPJ11

Part B When the energy stored in the inductor is maximum, how much energy is stored in the = capacitor? Express your answer with the appropriate units. Uc = Value Units Submit Request Answer Part € What is the maximum energy stored in the capacitor? Express your answer with the appropriate units. pA Uc = Value Units Submit Request Answer

Answers

When the energy stored in the inductor is maximum, the energy stored in the capacitor is zero. The maximum energy stored in the capacitor is 320J.

Part BWhen the energy stored in the inductor is maximum, the capacitor has zero energy stored in it. This is because, when the energy stored in the inductor is maximum, the current through the inductor is zero. This current is at a maximum in the capacitor. Therefore, the voltage across the capacitor is zero when the energy stored in the inductor is maximum.

For an inductor, the energy stored in it is given by the equation: E = 0.5 * L * I²Where:E is the energy stored in the inductorL is the inductance of the inductorI is the current flowing through the inductor Similarly, for a capacitor, the energy stored in it is given by the equation: E = 0.5 * C * V²Where:E is the energy stored in the capacitorC is the capacitance of the capacitorV is the voltage across the capacitorWhen the energy stored in the inductor is maximum, the energy stored in the capacitor is zero. So, Uc = 0 pA

.However, when the energy stored in the capacitor is maximum, we have to find the energy stored in the capacitor.Energy stored in the capacitor, Uc = 0.5 * C * V²Where,Uc is the maximum energy stored in the capacitorC is the capacitance of the capacitorV is the maximum voltage across the capacitor.

To know more about capacitor visit :

https://brainly.com/question/30917709

#SPJ11

Other Questions
write a function that returns the intersection of two vectors using the following header: the kp for the following reaction is 1.62 o2(g) 4no2(g) 2n2o5(g) kp = 1.618 what is the kp for the following reaction? n2o5(g) o2(g) 2no2(g) 0.786 0.886 0.617 0.777 0.381 An investment of $115 generates after-tax cash flows of $50 in Year 1, $80 in Year 2, and $140 in Year 3. The required rate of return is 20 percent. The net present value is closest to O $67.22. $63.24. O $49.39. O $99.57. A USA store expects 1,250,000 in repatriated profits from itsGerman subsidiary six months from today. Currently, the spot rateis US $1.0550/, and the six-month forward rate is US $1.0300/. find a power series representation for the function. f(x) = x5 4 x2 why is it considered poor programming practice to have public instance variables? a direct quotation means you are using the exact words of someone else and requires quotation marks true or false The following graph shows the domestic market for steel in the United States, where Sp is the domestic supply curve, and Dp is the domestic demand curve. Assume the United States is considered a large nation, meaning that changes in the quantity of its imports due to a tariff influence the world price of steel. Under free trade, the United States faced a total supply schedule of Sp+W, which shows the quantity of steel that both domestic and foreign producers together offer domestic consumers. In this case, the free-trade equilibrium (black plus) occurs at a price of $240 per ton of steel and a quantity of 18 million tons. At this price, the United States imports 12 million tons of steel. Suppose the U.S. government imposes a $60-per-ton tariff on steel imports. On the following graph, use the tan line (rectangle symbol) to draw the new total supply schedule including the tariff (SD+W+D. Then use the grey point (star symbol) to indicate the new market equilibrium price and quantity as a result of the tariff. 420 PRICE (Dollars per ton) SD+W+T Equilibrium Under Tariff Domestic Revenue Effect Terms-of-Trade Effect SD+W 0 4 20 Deadweight Loss 6 8 10 12 14 16 QUANTITY OF STEEL (Millions of tons) The tarrif's revenue effect (the import tariff multiplied by the quantity of steel imported) can be broken into two components: Domestic revenue effect Terms-of-trade effect 390 360 330 300 270 240 210 180 150 120 DD 2 Sp 18 On the previous graph, use the green rectangle (triangle symbols) to indicate the domestic revenue effect of the tariff. Then use the purple rectangle (diamond symbols) to indicate the terms-of-trade effect. Now consider the effect of the tariff on welfare in the United States. On the previous graph, use the black triangles (plus symbols) to indicate the deadweight loss caused by the tariff. True or False: National welfare in the United States increases as a result of a $60-per-ton tariff on steel imports. O True False O Real-word companies often seek to reduce the complexity of their operations in an attempt to increase profits. In 2012, Procter & Gamble believed it could increase the company's profit by eliminating some product-lines. In 2017, P&G announced that it had "divested, discontinued, or consolidated 105 brands." As a result, even though its sales had decreased by 22 percent from 2012 to 2017, its profits as a percentage of sales had increased by 55 percent. Other companies have also tried to improve their financial performance by downsizing. In November 2017, General Electric announced it would begin a downsizing operation that would result in their exiting businesses using over $20B in assets in the next one to two years. In January 2018, Newell Brands, the company whose products include Tupperware, Sharpie pens, Elmer's Glue, and Rawlings sports products, announced it would be reducing its products offerings to the extent that it would close half of its facilities and reduce it revenues by 20 percent.RequiredIdentify some cost savings these companies might realize by reducing the number of items they sell or use in production. Be as specific as possible, and use your imagination.Consider the additional information presented as follows, which is hypothetical. All dollar amounts are in thousands; unit amounts are not. Assume that P&G decides to eliminate one shampoo line, Luster, for one of its segments that currently produces three products. As a result, the following are expected to occur.(1) The number of units sold for the segment is expected to drop by only 125,000 because of the elimination of Luster, since most customers are expected to purchase an Anagen or Catagen product instead. The shift of sales from Luster to Anagen and Catagen is expected to be evenly split. In other words, the sales of Anagen and Catagen will each increase by 50,000 units.(2) Rent is paid for the entire production facility, and the space used by Luster cannot be sublet.(3) Utilities costs are expected to be reduced by $40,000.(4) All of the supervisors for Luster were terminated. No new supervisors will be hired for Anagen or Catagen.(5) Half of the equipment being used to produce Luster is also used to produce the other two products and its depreciation cost must be absorbed by them. The remaining equipment has a book-value of $340,000 and can be sold for only $60,000.(6) Facility-level costs will continue to be allocated between the product lines based on the number of units produced.Prepare revised product-line earnings statements based on the elimination of Luster. (Hint: It will be necessary to calculate some per-unit data to accomplish this). Maria Gonzalez, Ganado's Chief Financial Officer, estimates the risk-free rate to be 3.80%, the company's credit risk premium is 4.40%, the domestic beta is estimated at 1.18, the international beta is estimated at 0.86, and the company's capital structure is now 40% debt. The before-tax cost of debt estimated by observing the current yield on Ganado's outstanding bonds combined with bank debt is 8.30% and the company's effective tax rate is 38%. Calculate both the CAPM and ICAPM weighted average costs of capital for the following equity risk premium estimates. a. 8.70%b. 7.80%c. 5.60% d. 4.70% a. Using the domestic CAPM, what is Ganado's weighted average cost of capital if the firm's equity risk premium is 8.70%? % (Round to two decimal places.) Naturalism is a type of realism that focuses more on the earthlyenvironment.Select one:TrueFalse graphically, the solution to a system of two independent linear equations is usually Define the terms theoretical model and empirical model To provide a bold effect on the key messages, clair must enhance the __ element on the slide. Claire can use the __ option to read all slide text for better emphasis1st blankText. Bullet. Table.2nd blankVideo. Audio. Animation what element is undergoing reduction (if any) in the following reaction? zn(s) 2 agno3(aq) zn(no3)2(aq) 2 ag(s) MC Qu. 20-98 (Algo) Assume the demand for automobile... Assume the demand for automobile tires is unitary elastic and that the supply is unitary elastic. The burden of a $2 excise tax on each tire will be Multiple Choice borne by resource suppliers that provide the inputs for manufacturing tires bome primarily by sellers of tires a shared about equally by buyers and sellers of tires. bome primarily by buyers of tires trompe loeil techniques are used to make artworks look extremely realistic. True or False find a power series representation for the function. f(x) = x5 9 x2 Select two Tourism/Hospitality companies (you need 2 actual companies) and search for samples of recent advertising in English. It could be traditional media like TV or magazines or digital media, social media. You need 3 examples for each company (for a total of 6 examples) and include the images of the ads found in your search. If you do not use Tourism/Hospitality companies mark for the assignment will be "0". (6 Marks-2 marks each)Identify and describe the strategies used in the ads to overcome the problem of intangibility.Which company in your view does a better job of overcoming the intangibility of its services an explain why?How does each company deal with the question of the service quality offered and the risk for the consumer in possibly making a wrong decision in selecting this company? For a binomial distribution, the mean is 15.2 and n = 8. What is for this distribution?A. .2B. 1.9C. 15.2D. 2.4