There are basically five types of welding namely:
a)Gas Metal Arc Welding (GMAW/MIG)
b)Friction welding,
c)ELECTRON BEAM WELDING
d) LASER BEAM WELDING
e) RESISTANCE WELDING
What is welding?
Welding is a fabrication process in which two or more parts are joined together using of heat, pressure, or both to form a joint as the parts cool. materials to be welded include metals, thermoplastics, and wood.
Types of welding processes
a)Gas Metal Arc Welding (GMAW/MIG)
Used mainly for joining metals like stainless steel, nickel, copper alloys, aluminum, titanium, and cobalt.
b)Friction welding
This is a technique used to join materials using mechanical friction. this can be used to join wood, steel, and aluminum.
c)ELECTRON BEAM WELDING
This process uses a mean of high-velocity electrons to combine materials this can be used to join thick sections in the aerospace, automotive, rail, and nuclear power industry.
d)LASER BEAM WELDING
this is used to combine pieces of metal or thermoplastics.
e) RESISTANCE WELDING
This is a process that joins metals by applying pressure and passing a current through them for a period of time.
Learn more on welding from
https://brainly.com/question/21049525
#SPJ1
the renewable composite insulation material must have the following characteristics: an overall uniform thickness less than or equal to one inch. a consistent internal composition. environmentally friendly and/or recyclable. must be economical. dimensions must not exceed the overall of the top of the heat box apparatus.
The correct anwser is that this does not exceed the overall off the top of renewable of the heat box.
Renewable Insulation introductionThe largest amount of energy consumed within the average home is related tomaintaining adequate climate control through heating and cooling systems. Toconserve energy and decrease expenses associated with climate control, properhome insulation techniques are required. Insulation technologies relating tomaterials and application have advanced throughout the home building industry withtime. The home building industry once relied on straw and newspaper for insulatingmaterial. The industry currently utilizes technology such as fiberglass and blownexpandable foam. Insulation material advancement is driven by consumersdemanding insulation material designed for high insulation value along with positiveoccupant health and environmental impact.
to know about the renewable click the link below:
brainly.com/question/3831884
consider a cylindrical titanium wire 3.0 mm (0.12 in.) in diameter and long. assuming that the deformation is totally elastic, its elongation (in mm or m) when is under a load of 500 n is:
The elongation is: 6.87 * 10⁻⁶ m
Complete Question:
Consider a cylindrical titanium wire 3.0 mm (0.12 in.) in diameter and 2.5 Ã 104 mm (1000 in.) long. Assuming that the deformation is totally elastic, its elongation (in mm or m) when is under a load of 500 n is:
Diameter of the titanium wire = d = 0.12 in = 3.0 mm = 0.003 m
Length, L = 1000in = 104 mm = 0.0104 m
Load/Force applied = F = 500 N
Elongation is change in length ΔL
Stress on the wire = Force/Area
F = 500 N
A = π (d/2) ² = π (0.003/2) ²
A = 7.069*10⁻⁶ m²
Stress = 500 N/7.069x10⁻⁶ m² = 70.731x10⁶ N/m2
Stress = 0.0707 GPa
Now, the Young's modulus for Ti = 107 GPa
Young's modulus = Stress/Strain
Strain = 0.0707/107
Strain = 0.000660
Now,
Strain = ΔL/L
ΔL = 0.000660x0.0104
ΔL = 6.87 * 10⁻⁶ m
Hence the elongation is 6.87 * 10⁻⁶ m
Learn more about elongation:
https://brainly.com/question/852985
#SPJ4
A building may be work of art if it reflects technological, environmental and societal considerations
It is false that a construction is considered a work of art because it has technological, environmental and social considerations.
Why can a construction be considered a work of art?A construction can be considered a work of art when its appearance and visual factor is characterized by beauty and differs from other constructions in its internal and external part. For example, the Burj Khalifa building located in Dubai is a work of art because its infrastructure is scaled and has very striking shapes for the public.
On the other hand, a self-sustaining house is not considered a work of art despite including technology to have environmental and social consideration. According to the above, it can be inferred that it is false that when a construction has a technological implementation for social and environmental considerations it is a work of art.
Note: This question is incomplete because there is some information missing. Here is the complete information:
Options
True
False
Learn more about buildings in: https://brainly.com/question/24285028
#SPJ1
A signal was acquired at 200 hz and the spectrum showed a peak at 70 hz. no anti-aliasing filter was used. find the 5 lowest possible frequencies that the original signal may have.
f1 = 70 Hz
f2 = 130 Hz
f3 = 270 Hz
f4 = 330 Hz
f5 = 470 Hz
QUESTION 8
Per the Machinery's Handbook, close-fitting bushings in drill jigs may increase
holes.
wear
friction
heat
damage
on the drill and cause swarf to plug up the drill
Answer:
Explanation:
heat
technician a says that fuel pump modules are spring-loaded so that they can be compressed to fit into the opening. technician b says that they are spring-loaded to allow for expansion and contraction of plastic fuel tanks. who is right?
According to Technician A, fuel pump modules are spring-loaded so they can be compressed to fit the aperture.
Electric fuel pumps are often mounted in the fuel tank to utilize the fuel in the tank to cool the pump and ensure a steady supply of fuel. Each injector has a spring-loaded valve that is kept closed by the force of the spring. The valve doesn't open until fuel is squirted into it. The fuel pump driver module controls the voltage supplied to the fuel pump in a vehicle. By adjusting voltage, the module ensures ideal fuel pressure and flow to the engine throughout its entire operating range.
Learn more about voltage here-
https://brainly.com/question/29445057
#SPJ4
a steam power plant operating on the simple ideal rankine cycle is considered. the heat input into the cycle is 2728 kj/kg, and the heat output is 2018 kj/kg. determine the thermal efficiency of this cycle.
The average temperature at which heat is fed to the cycle is raised, increasing the Rankine cycle's thermal efficiency. lowering the typical temperature at which the cycle rejects heat.
Power plants that employ coal or nuclear energy frequently use the Rankine cycle, also known as the Rankine Vapor Cycle. A fuel is used in this mechanism to generate heat in a boiler, turning water into steam that expands via a turbine to provide useful work. The Rankine cycle's efficiency is lower than that of a Carnot cycle operating between the same maximum and minimum temperatures because the mean temperature at which heat is provided is lower than the maximum temperature,
Learn more about efficiency here-
https://brainly.com/question/13154811
#SPJ4
a half-wave rectifier circuit with a 500-q load operates from a 120-v (rms) 60-hz household supply through a 12-to-l step-down transformer. it uses a silicon diode that can be modeled to have a 0.7-v drop for any current. what is the peak voltage of the rectified output? for what fraction of the cycle does the diode conduct? what is the average output voltage? what is the average current in the load?
A sinusoidal waveform's average voltage (VAV) is calculated by multiplying the peak voltage value by the constant 0.637,which is equal to two divided by pi.
Explain about the Average output voltage?A waveform's level that is determined by the requirement that the region enclosed by the curve above it is exactly equal to the region enclosed by the curve below it.
The amount of power averaged throughout time is referred to as average power. By averaging the instantaneous power's time throughout a single cycle, we may determine average power.
By multiplying the peak value by 0.637 or the RMS value by 0.9, average or mean voltage and current values may be derived that can be used to calculate the same amount of power consumption as for analogous DC values. When converting from AC to DC, the average or mean value is frequently utilized (rectification).
To learn more about Average output voltage refer to:
https://brainly.com/question/15710971
#SPJ4
a venturi meter with a 7 in diameter throat is installed in a 14 in diameter water line. the venturi is perfectly smooth, so that the discharge coefficient is 1.00. an attached mercury manometer registers a 3 in differential. what is the volumetric flow rate?
Micrometer for brake rotors. For air disc brakes, the steering axle brake lining/pad thickness must be at least 3.2 mm (1/8 inch), and for hydraulic disc, drum, and electric brakes, it must be at least 1.6 mm (1/16 inch).
Every 45° (1/8 of a rotation), take a measurement of the brake rotor thickness of 0.40 inches (10mm) inside the outside circumference of the brake rotor. 6. Compare the lowest result obtained to the brake rotor's minimum thickness requirements. Depending on the vehicle, replacement brake pads can range in thickness from roughly 3/8" to 1/2". When the pads are down to around 1/4 inch, some shops advise changing them; others advise doing so at 1/8 or when only 20 to 25 percent of the original thickness remains.
Learn more about brakes here-
https://brainly.com/question/13439091
#SPJ4
All of the following can be added to a circuit to reduce electromagnetic interference, except:
A)
a capacitor.
B)
a diode.
C)
a coil.
D)
ground wires.
air is compressed at 20 psi and 70 degrees f to 150 psi in a compressor. the compressor is operated such that the air temperature remains constant. calculate the change in the specific volume of air as it passes through this compressor.
dH = V dp However, I am also aware that H = CpT. The air is compressed when a force is provided by pushing the plunger in. Consequently, the air now occupies less area (as seen below).
This demonstrates a reduction in the gas's volume (although the mass of the gas remains the same). It is accurate to say that as air temperature rises, so does air volume. As the gas volume decreases, the molecules hit the walls more frequently, raising the pressure; conversely, as the volume increases, the molecules must travel farther to strike the walls, reducing the frequency with which they do so and raising the pressure.
Learn more about volume here-
https://brainly.com/question/22443936
#SPJ4
A resistor, an inductor, and a capacitor are connected in series to an ac source. What is the phase angle between the voltages of the inductor and capacitor in this rlc circuit?.
The phase angle is 180°.
A resistor, inductor, and capacitor are connected in series to an AC source.
You can learn more through link below:
https://brainly.com/question/16971122#SPJ4
Tech A says that the principle of thermal expansion is what pushes the piston down the cylinder on the power stroke. Tech B says that the piston is pulled down the cylinder on the intake stroke. Who is correct?
Tech A is correct because Tech A says that the principle of thermal expansion is what pushes the piston down the cylinder on the power stroke.
What motion does the compression piston make?while the intake and exhaust valves are kept closed by valve springs, the piston advances up the cylinder during the compression stroke to pressurize the fuel/air combination. A high-tension spark from the spark plug ignites the mixture of fuel and air during the power stroke.
Note that By pushing the piston downward and expanding the chamber's capacity, the heat energy generated by combustion is put to use in the chamber. Due to the fact that this is when the thermal energy is converted into motion to power the device or vehicle, it is sometimes referred to as the "power stoke."
Learn more about Thermal expansion from
https://brainly.com/question/1166774
#SPJ1
In conducting a test on the kind of music that may encourage plant growth, what practice upholds the fair test standard? A. using different kinds of plants B. giving some plants more water than others C. exposing the plants to different types of music D. using nutrient-rich soil for one and plain soil for others
In conducting a test on the kind of music that may encourage plant growth, the practice that upholds the fair test standard are:
using different kinds of plants (Option A)giving some plants more water than others (Option B)using nutrient-rich soil for one and plain soil for others (Option D).What are the factors that determine plant growth?Water, light, temperature, and nutrients are the four most important factors influencing plant development.
Plants go through the following stages: seed to sprout, vegetative, budding, blooming and maturing. Similarly, when individuals and plants develop, their dietary requirements alter.
The following are major elements influencing plant growth: Temperature: As the temperature rises, growth accelerates. Light intensity, duration, and quality all have an impact on various physiological processes that occur in plants. Water: Water is necessary for plant development.
Playing classical or jazz music stimulated growth in most plants, but harder metal music generated stress. This might be because the vibrations of metal music are too strong for plants and activate cells excessively. We compare it to massaging your plant with music; they prefer a softer touch.
Learn more about plant growth:
https://brainly.com/question/9323511
#SPJ1
air is compressed at 20 psi and 70 degrees f to 150 psia in a compressor. the compressor is operated sich that the air temperature remains constant. calculate the change in the specific volume of air as it passes through this compressor.
Change in the specific volume of air = -8.51 ft³/lbm
By using the ideal gas law:
n1 = 1 mole
p1 = 20psia
T1 = 70°F
n2 = 1 mole
T1 = T2 = 70°F
Δv = v2-v1
Change in the specific volume of air = -8.51 ft³/lbm
⇒ negative sign shows that gas was compressed during this process.
Learn more about volume:
https://brainly.com/question/6071957
#SPJ4
3. When using the Cold Saw what is the correct Water to Coolant ratio?
a.
b.
10:1
20:1
c. 15:1
d. 25:1
When using the cold saw, the correct water-to-coolant ratio should be 20:1.
What is a cold saw?
A cold saw is a sawing machine that uses a circular saw blade to cut metal.
What happens if coolant to water ratio is too high?
Having too much water will not cool the engineHaving too much antifreeze could cause your water pump to fail.What happens if you don't add water to the coolant?
Water has minerals that can deform deposits inside the radiator and the cooling system passages of your engine. And over a long period of time, they can lead to overheating.Therefore, in a cold saw the water-to-coolant ratio should always be 20:1.
To know more about water as a coolant from the given link:
https://brainly.com/question/14624644
#SPJ1
discuss why pressure tests of pressurized tanks such as steam boilers, pipes and tanks including gases such as nitrogen, air, oxygen, etc. with high pressure are carried out hydrostatically by using liquids such as water and hydraulic oil.
The reason that pressure tests of pressurized tanks such as steam boilers, pipes and tanks including gases such as nitrogen, air, oxygen, etc. with high pressure are carried out hydrostatically by using liquids such as water and hydraulic oil is because some of them are very volatile such as oxygen and can explode and as such the use of hydrostatic solvent can reduce its temperature.
Why do you use nitrogen for pressure testing?The use of pressure tests is to ensure the integrity of equipment including pressure vessels, pipes, plumbing lines, gas cylinders, boilers, and fuel tanks, pressure tests are a non-destructive option. The piping codes demand that it be verified that a piping system can support its rated pressure and is leak-free.
Nitrogen is free from many of the issues that come with utilizing air or water for pressure testing because it is inert, odorless, and has a low moisture content. Additionally, thanks to portable nitrogen generators, nitrogen is perfect for testing in a range of places.
Tanks and pipes are subjected to hydrostatic pressure testing to check for leaks. A hydrostatic test is carried out by pressurizing the vessel or piping under test, filling it, and then checking for changes in the pressurization level.
Note that there is the district cooling or district heating systems, by performing a pressure test. In addition to ensuring proper operation, this kind of examination will enable us to identify any leaks in a specific pipe so that repairs may be completed.
Learn more about pressure tests from
https://brainly.com/question/10162194
#SPJ1
-6. When we say the flip-flop is in the set condi-
_____ is at a
tion, we mean output
logical
MT
CL
The term “Flip-flop” relates to the actual operation of the device, as it can be “flipped” into one logical Set state or “flopped” back into the opposing logical set.
A flip-flop is a device which stores a single bit (binary digit) of data; one of its two states represents a "one" and the other represents a "zero". Such data storage can be used for storage of state, and such a circuit is described as sequential logic in electronics.
STATIC RAM (SRAM) consists of flip-flops, a circuit composed of four to six transistors. Once a flip-flop stores a bit, it keeps that value until the opposite value is stored in it.
Hence, logical set is used.
To know more about Flip flop from the given link
https://brainly.com/question/4237777
#SPJ1
The two switches in the circuit seen in Fig. P7.6 are synchronized. The switches have been closed for a long time before opening at t = 0. a) How many microseconds after the switches are open is the energy dissipated in the 4 Ohm resistor 10% of the initial energy stored in the 6 H inductor? b) At the time calculated in (a), what percentage of the total energy stored in the inductor has been dissipated?
0.3 A is the calculated current. Because the sum of the currents entering and leaving the junction is equal, Kirchhoff's first law is based on the conservation of charge.
The algebraic sum of potential drops in a closed circuit must equal zero, according to Kirchhoff's second law.
The capacitors will begin charging through resistor 2 as soon as switch S is closed, and there won't be any current flowing through resistors 8 and 4.
As a result, I1=2/6
=3A,
I2=0,
and I3=0.
The charging of the capacitors will cease a long time after switch S is closed, but current will still flow through resistors 8 and 4.
Applying Kirchhoff's law, loops 1 and 2 are equal to (3/2)0.6
=0.9A and loop 3 is equal to
(0.90.6=0.3A).
Learn more about current here-
https://brainly.com/question/20756115
#SPJ4
refrigerant 134a is the working fluid in a solar power plant operating on an ideal rankine cycle. saturated vapor at 60 oc enters the turbine, and the condenser operates at a pressure of 6 bar. the rate of energy input to the collectors from solar radiation is 0.4 kw per m2 of collector surface area. determine the solar collector surface area, in m2, per kw of power developed by the plant.
The solar collector surface area, in m2, per kW of power developed by the plant is [tex]25.3 m^2/kW[/tex].
1. T1=[tex]60 ^{0}[/tex]C
H1=275.99 kJ/Kg (Enthalpy for saturated vapor [tex]60^{0}[/tex]C)
Hfg=137.42 kJ/Kg
2. P2= 6 bar
T2=21.58 C ( temperature of sat. liquid 6 bar)
H2=259.19 (enthalpy of sat. liquid 6 bar)
From the above conditions, the power generated can be found.
Wt.=H1-H2=275.99-259.19=16.8 KW )
3.After condensing:
T3=21.58 C
P3= 6 bar
4. After pump:
T4=21.58 C
the power required by the solar collector to bring the temperature of the fluid up to 60 C and vaporize the fluid :
W=CpT + [tex]H_{fg}[/tex]
Cp= 0.857 KJ/kg
[tex]H_{fg}[/tex]=137.42
W=0.857x(60-21.58) + 137.42=170.35 KW
Area required:
A=[tex]170.35 kw/0.4 KW/m^2[/tex]
A=[tex]425.86 m^2[/tex]
Area/Power generated= A / Wt=[tex]425.86 m^2/16.8 KW[/tex]
Area/Power generated=[tex]25.3 m^2/KW[/tex]
What is solar radiation?Solar radiation often referred to as solar energy or simply sunlight, is the general term for electromagnetic radiation emitted by the sun. Solar radiation can be captured and converted into useful forms of energy such as heat and electricity using various technologies.
Solar radiation produces heat, light and energy that all living organisms need. Infrared radiation provides heat to all habitats both on land and in water Without solar radiation, the earth would be about 32°C colder 25. Solar radiation provides the heat and light necessary for life on earth.
TYPES OF SOLAR RADIATION
Direct solar radiation. Diffuse solar radiation. Reflected solar radiation.To learn more about solar radiation, refer;
https://brainly.com/question/23338147
#SPJ4
Two Liquids, A and B, are mixed. A is 5% solids, the rest is water. B is 11% solids; the rest is water. To the mixture is added 18.5 kg of bone-dry solids resulting in a mixture of 2,150 Kg containing 8.25% solids. What were the original amounts of the liquids A and B? Show all work
The original amounts of the liquids A and B based on the information will be 1260kg and 872kg.
What is an equation?An equation is the statement that illustrates that the variables given. In this case, two or more components are taken into consideration to describe the scenario. It is vital to note that an equation is a mathematical statement which is made up of two expressions that are connected by an equal sign.
Based on the information given, let us call the liquids illustrated as A and B, while the weight is in kg.
The first equation is the amount of solids and this will be represented thus:
0.05A + 0.11B + 18.5 = 0.0825(2150) = 177.375
0.05A + 0.11B = 158.875
5A + 11B = 15887.5
The second equation will be represented thus:
A + B + 18.5 = 2150
Collect like terms
A + B = 2150 - 18.5
A + B = 2131.5
Multiplying the equation will be:
6B = 5230
Divide through by 6
6B / 6 = 5230 / 6
B = 872 kg
Therefore, A will be 1260 kg.
Learn more about liquid on:
https://brainly.com/question/752663
#SPJ1
N 40° 30' E
Achains 21 Links 4 chains 25 LINKS
Schains 21 LINKS
OLO
5 chains
N 40° 30'E
FARM
3 chains
N 49° 30' W
ROAD
1. Determine the area of the enclosed property in square feet and acres.
2. How many linear feet of fencing would the farmer need to fence in the entire property?
3. If the land is valued at $4500.00 per hectare, what price did the farmer pay for the parcel?
4. Determine the three unidentified internal angles of the polygon.
5. Determine the bearings of the unidentified sides of the parcel.
Answer:
Omg so long i will give later
you are on a job site and observe wall forms that are constructed of light, rigid foam insulation. a coworker explains that the wall forms will remain as part of the wall system after the concrete is poured and cured. what is the name commonly used for this type of wall?
Salt in crude oil must be removed before the oil undergoes processing in a refinery. The crude oil is fed to a washing unit where freshwater fed to the unit mixes with the oil and dissolves a portion of the salt contained in the oil. The oil (containing some salt but no water), being less dense than the water, can be removed at the top of the washer. If the “spent” wash water contains 15% salt and the crude oil contains 5% salt, determine the concentration of salt in the “washed” oil product if the ratio of crud oil (with salt) to water used is 4:1.
Answer:
What is the question?
Explanation:
If C1= 20 micro farad and CW= 10 micro farad are connected in series in a simple electric circuit,then find the total capacitance
The total capacitance of the given electric circuit is 30 microfarad.
Define capacitance.
The ability of a physical thing or equipment to store electric charge is known as capacitance. The capacitance is quantified by the ratio of those values, which represents the change in charge in response to a variation in electric potential.
When an earthed conductor is moved close to a conductor, its capacitance increases, which is how capacitors operate. The capacitor, therefore, contains two parallel plates that are spaced apart by a certain amount of gap and oriented in opposing directions. The formula C=Q/V is used to determine a capacitor's capacitance based on its charge, Q, and its voltage, V.
Solution Explained:
Given, C1 = 20microfarad and CW = 10 microfarad
Since they are in series,
Total capacitance = C1 + CW = 20 + 10 = 30microfarad
To learn more about capacitance, use the link given
https://brainly.com/question/27393410
#SPJ9
n order to adjust the mix to increase the compressive strength, the water-to-cement ratio is reduced to 0.45. will the quantity of coarse aggregate increase, decrease, or stay the same?
The strength reduces as the w/c ratio rises. The typical w/c ratio needed to completely hydrate cement is 0.42.
Beyond this point, additional water makes concrete easier to work with for compaction but is not required for hydration. A larger water-to-cement ratio results in wider gaps between the cement aggregates, which affects the compaction. Consequently, rising moisture levels result in decreased concrete durability and compressive strength. In a variety of applications, mortar or concrete's fresh and hardened qualities are enhanced by chemical admixtures. Their inclusion may enable the water to cement ratio (w/c) to be decreased without compromising the mixture's workability.
Learn more about compression here-
https://brainly.com/question/26422390
#SPJ4
technician a says that cj-4 diesel engine lubricating oil is backward compatible with all previous diesel engine lube oil classifications. technician b says that the digit 4, in cj-4 means that the oil is suitable for 4-stroke cycle use. who is right?
Answer: The both the a and b technician are correct about the lubricating oil.
Explanation:
A lubricant, also known as lube or lubricant, is a substance that aids in reducing friction between surfaces in contact, thereby lowering the heat produced when the surfaces move. Additionally, it might be used for force transmission, the transportation of foreign objects, or the heating or cooling of surfaces. Lubricity is the quality that lowers friction.In addition to industrial applications, lubricants are used for many other purposes. Other uses include cooking (oils and fats in use in frying pans, in baking to prevent food sticking), bioapplications on humans (e.g. lubricants for artificial joints), ultrasound examination, medical examination, and sexual intercourse. It is mainly used to reduce friction and to contribute to a better and efficient functioning of a mechanism
to learn more about the lubricating oil click the link below:
brainly.com/question/28205559
part c - spherical pressure vessel a spherical pressure vessel is required to contain 1.8 m3 of compressed natural gas at 22 mpa . if the tank is made of a516 grade 60 steel with a maximum normal stress 150 mpa , what is the required thickness of the tank wall?
The required tank wall thickness is 87.7668 millimeters.
Detailed explanation:
Given:
V=1.5 m3 is the vessel's volume.
P=22 MPa compressed natural gas is contained in a spherical pressure vessel.
In the event that the tank is constructed of A516 grade 60 steel with a 150 MPa maximum normal stress.
ie omax = 150 Mpa
Solution :
The vessel's diameter is determined by,
d/2 =√3v/4[tex]\pi[/tex]
d/2 =√3*.5/4*3.14
d/2=√0.358
d/2 =1.196m
Convert into mm,
d= 1.96*1000=1196.82mm
The wall tank's thickness is determined by,
t=pd/20
t=22*1196.82/2*150
t=26330.04/300
t=87.7668
Therefore, the required thickness of the tank wall is 87.7668 mm.
To learn more about pressure vessel refer to
https://brainly.com/question/13939740
#SPJ4
refrigerant-134a enters a compressor at 200 kpa as a saturated vapor with a flow rate of 0.45 m3 /min and leaves at 800 kpa. the power supplied to the refrigerant during compression process is 3 kw. what is the enthalpy of r-134a at the exit of the compressor?
The fluid's state at the outlet resembles that of a superheated vapor. The specific enthalpy's corresponding temperature is T=49.641 C.
Enthalpy is the unit used to describe the total amount of heat in a thermodynamic system with constant pressure. It's depicted as. Where E is the internal energy, P is the pressure, and E is the energy, H is defined as E + P + V. The degree of disorder in a thermodynamic system is measured by entropy. The First Law of Thermodynamics is used to model the compressor:
W+ m (h in - h out) =0
The following expression can be used to determine the mass flow rate:
The refrigerant's characteristics at the inlet are: Saturated Vapor, State
P=180 pka
Tsat=12.73
It is calculated as follows: m=0.053 kg/s
284.409 kJ/kg is the specific enthalpy at the outflow.
The fluid's state at the outlet resembles that of a superheated vapor. The specific enthalpy's corresponding temperature is T=49.641 C.
Learn more about superheated here-
https://brainly.com/question/15684012
#SPJ4
tech a says that duo-servo brake shoes are only anchored on the top. tech b says that duo-servo brake shoe systems typically adjust automatically during normal brake applications in a forward direction. who is correct?
Tech A is correct. Duo-servo Brakes with the Bendix design are simple to recognize. At the top of the backing plate, they feature a single fixed anchor pin, and below the anchor is a dual-piston wheel cylinder.
Two brake shoes, referred to as the primary shoe and secondary shoe, are connected by an adjuster in the duo servo type's mechanism. Strong pressure from the primary shoe's servo effect (self-boosting effect) is transferred to the linked secondary shoe, creating a significant amount of braking force. The disadvantage of a dual servo is that it will use 80% of the braking force in reverse as opposed to a single servo's 20%, which will make it simpler to reverse your trailer.
Learn more about brakes here-
https://brainly.com/question/17205672
#SPJ4
