How would you explain the key concepts for the CWA in less than two minutes?

Answers

Answer 1

Answer:

Explanation:

vPoint Source - a source of water discharged to surface water through a discrete point - generally through a pipe, ditch, or channel.

Nonpoint Source - Nonpoint sources, such as parking lots or athletic fields, discharge runoff water to groundwater or surface water; runoff does not come from  a pipe, ditch, or channel. These sources may contain pollutants such as pesticides, motor oil, and soaps.

Navigable Waters of the United States  For the purposes of the Clean Water Act, the term "navigable waters" includes:

all waters used in commerce, including groundwater;

all interstate waters including wetlands, mudflats, and sand-flats; and

all other waters such as lakes, rivers, streams, wetlands and sloughs.

EPA policy states, "The majority of facilities in the U.S. have the potential to discharge to navigable waters."  The Supreme Court decision in (2006) requires the Army Corps of Engineers and the EPA to determine whether there is a "significant nexus" between a navigable waterway and an area a spill might affect.  In June of 2007, EPA and the Army Corps of Engineers released provisional interpretive guidance regarding the "significant nexus” question. According to this guidance, the agencies will assert jurisdiction over traditional navigable waters, wetlands adjacent thereto, and relatively permanent tributaries thereof. The agencies will generally not assert jurisdiction over swales and ditches that lack routine water flow. Finally, the agencies will apply the "significant nexus" requirement and make a case-by-case, fact-specific analysis on impermanent tributaries and other wetlands.

Additional executive orders were issued 2015 in 2019.  Under the 2019 proposal, traditional navigable waters, tributaries to those waters, certain ditches, certain lakes and ponds, impoundments of jurisdictional waters, and wetlands adjacent to jurisdictional waters would be federally regulated. It also details what are not "waters of the United States," such as features that only contain water during or in response to rainfall (e.g., ephemeral features); groundwater; many ditches, including most roadside or farm ditches; prior converted cropland; stormwater control features; and waste treatment systems.

Could the requirement for one or more NPDES Discharge Permit apply to my campus?

If your campus discharges pollutants directly to navigable waters of the United States through a point source, you must obtain an NPDES permit or redirect the flow of the waste.

Stormwater releases from certain activities require an NPDES permit. The most common activities on college campuses requiring NPDES permits for stormwater are construction activities disturbing more than 1 acre, hazardous waste storage areas operating under the Resource Conservation and Recovery Act permit system, steam-generating power plants, and airports. See Stormwater section below.

Regulations issued by local water authorities, or Publicly Owned Treatment Works (POTWs), not NPDES permits, govern discharges into sanitary sewer systems. See Sewer Use (POTW) section below for more information about requirements for using POTWs for commercial or industrial waste disposal.

What do I have to do related to NPDES Discharge Permits?

Determine where wastewater flows from buildings and processes on your campus. Any industrial or commercial operation (e.g., ice rink melt pits, floor drains, and vehicle wash stations) that discharge into a water of the United States may require an NPDES permit. If required, you must obtain such a permit from the appropriate regulatory agency, probably your state environmental agency.

French drains, dry wells, and septic system leach fields are different from point source discharges because they do not immediately affect surface water. Some state and federal environmental agencies manage these systems under the Underground Injection Control program, part of the Safe Drinking Water Act. See Safe Drinking Water Act for more information.

Details of NPDES


Related Questions

The walls of the large intestine absorb (a) water (b) digested food (c) undigested food (d) cellulose​

Answers

Answer:

a) water

Explanation:

digested food is mostly absorbed in the small intestine.

The walls of the large intestine absorb a)water.

In the large intestine, the water from the undigested food is absorbed and the remaining undigested food is sent to the rectum.

From the rectum, the undigested food materials are egested from the anus as feces.

To learn more about the large intestine,

https://brainly.com/question/3476947

Use the data in the table to suggest why the doctor should NOT prescribe pencillin.

Answers

Answer: The doctors should not prescribe penicillin because bacteria become resistant to penicillin over time.

Explanation:

Penicillin is used as a therapy for bacterial infections. The synthesis of the enzyme penicillinase, which disintegrates the penicillin molecule and renders it useless, is what led to the development of the resistance in bacteria.

Penicillin was administered to patients with throat infections. It was observed that the patients developed immunity to the antibiotic and rendered it ineffective.

To know more about penicillin- https://brainly.com/question/11849121

Drag each tile to the correct box.

The diagrams represent different phases of the menstrual cycle. Arrange these diagrams of the female reproductive system in the correct order in which the menstrual cycle progresses, starting with day 1 of the menstrual cycle.

Answers

The correct order in which the menstrual cycle progresses, starting with day 1 of the menstrual cycle, is as follows:

MenstruationFollicular Phase:OvulationLuteal Phase

How do we explain?

The first phase of the menstrual cycle is the follicular or proliferative phase. Occurs from day 1 to day 14 of the menstrual cycle, based on an average menstrual cycle of 28 days.

The follicular phase begins on the first day of menstruation and lasts 13-14 days, ending with ovulation.

During the Luteal phase, the empty follicle transforms into the corpus luteum, which produces progesterone to prepare the uterus for potential implantation.

Learn more about menstrual cycle at:

https://brainly.com/question/1483249

#SPJ1


A car starts from rest and gains a velocity of 20 m/s in 10 s. Calculate acceleration and average velocity. ​

Answers

The acceleration of the car is 2 m/s².

The average velocity of the car is 2 m/s.

How to calculate acceleration ?

The equation acceleration = (final velocity - beginning velocity) / time can be used.

Given:

Initial velocity (u) = 0 m/s (since the car starts from rest)

Final velocity (v) = 20 m/s

Time (t) = 10 s

Using the formula, we can substitute the values:

acceleration = (20 m/s - 0 m/s) / 10 s

acceleration = 20 m/s / 10 s

acceleration = 2 m/s²

Therefore, the acceleration of the car is 2 m/s².

You can use the following equation to determine the average velocity: average velocity = total displacement / total time.

The initial position and the final position are identical since the automobile begins at rest. As a result, the displacement and the ultimate position are equal.

Given:

Displacement = 20 m

Time (t) = 10 s

Using the formula, we can substitute the values:

average velocity = 20 m / 10 s

average velocity = 2 m/s

Therefore, the average velocity of the car is 2 m/s.

Learn more about substitute here : brainly.com/question/26094713

#SPJ1

The bar chart here shows the relative speed of light through different types of media, air, water, and oil. Using the representation shown here, predict the speed of light through different media. Select ALL that correctly predict the light’s speed. A. Light traveling through glass would have a speed slower than that of light in air. B. Light traveling through a vacuum would have a speed higher than that of light in air. C. Light traveling through quartz would be faster than all speeds shown through the selected media. D. Light traveling through translucent plastic would be faster than all shown speeds through the media listed. E. Light traveling through humid air would be slower than the light through air but faster than light through water shown here.

Answers

Based on the information in the chart, light traveling through glass would have a speed slower than that of light in the air (option A), and light traveling through a vacuum would have a speed higher than that of light in the air (option B).

How does the speed of light change depending on the medium?

Based on the graph, the denser the medium is the slower the light moves. For example, light is much faster when traveling in the air than when traveling in oil. Due to this, the true statements are:

Light travels slower through glass than in the airLight would travel faster through a vacuum.

Learn more about light in https://brainly.com/question/29994598

#SPJ1

DNA is formed using four kinds of base subunits. In a double-stranded segment of DNA, the percentage of the base C is 18%. What is the approximate percentage of base T?

Answers

Answer:

The correct option is C 32%

According to Chargaff’s rule in a DNA molecule A = T and G = C and A + G + C + T = 100%. Here cytosine (C) is 18% hence G = 18%

A + T = (100 – 36)%

A + T = 64%

A = 32%

Explanation:

Other Questions
acquisition is an attractive approach for companies seeking diversification into another industry because Identify signs of intimate partner abuse. Why is accurateidentification of this problem often difficult to determine? Find an equation of the tangent plane to the parameterized surface given byx = u vy = u3+ 1z = u21at the point (1,9,3). Determining the effect of water in foods or characterizing flavor compounds in foods is most likely the job for food scientists working in Quality control Food processing Food microbiology Food chemistry Question 34 2 pts Which of the following is a discipline LEAST related to the Food Science? Chemistry Regulation Microbiology Literature select all that apply recall the preparation of a bank reconciliation by selecting the correct items below. (check all that apply.) multiple select question. add the deposits in transit to the book balance. add any unrecorded bank fees to the bank balance. compute the adjusted book balance. subtract any outstanding checks from the bank balance. add deposits in transit to the bank balance. compute the adjusted bank balance. An inductor L, resistor R, of value 5 Q and resistor R of value 10 Q are connected in series with a voltage source of value V(t) = 50 cos cot. If the power consumed by the R resistor is 10 W, calculate the power factor of the circuit. Explain the roles of a voltage buffer and an inverting amplifier, each built with an OP AMP and peripherals, in constructing capacitance multiplier. Why is it impor- tant to make use of a floating capacitor nursingplease clear hand writing or pc writhingnursing careing Case Scenario for Skin Integrity A 69-year-old patient, was admitted at Male Medical Ward for more than a week with paralysis at right area of the body due to Stroke or Cerebrovascular Accident. He is slightly conscious and sometimes disoriented to time, place and person. He said very softly that he can feel sharp pain at the back of his sacral area.Upon observation, the nurse noticed that he has Stage 2 pressure or decubitus ulcers with intact skin exposing the epidermis and the dermis part of the skin at the end of his spine. It appears red and warm to the touch and there is slight hematoma around the skin that impedes the circulation but there is no bleeding. His temperature is slightly increasing from afebrile on the first day of admission with 38.2 on the 7" day. His white blood cell count is 15,000 per microliter of blood and the doctor already order wound dressing and topical antibiotic. For the JDBC call to connect to a database from a java application, match what the parameters p1, P2, P3 should contain Connection conn = DriverManager.getConnection( p1, P2, P3 ); p1 A. login p2 B. connect-string p3 C. password which creepy element is seen in the last judgment tympanum at st. lazare, autun? 14. Order: Infuse Aminophylline at 60 ml/hr Supply: Aminophylline 500 mg/250 ml D5W How many mg are infusing per hour? I What is disease process (pathophysiology) for the different types of migraine headaches? What are the risk factors?Any preventative measures?How does the disease progress?How is it diagnosed?What are the early symptoms?What are the late symptoms?What are the complications and the key symptoms of the complications?Treatments for disease (and important things to know about them such as side effects)Treatments for symptoms of the disease medications (medications and side effects/nursing actions)What nursing actions would you take? why are hydrocarbons insoluble in water? a) the majority of their bonds are polar covalent carbon-to-hydrogen linkages. b) the majority of their bonds are nonpolar covalent carbon-to-hydrogen linkages. c) they exhibit considerable molecular complexity and diversity. d) they are less dense than water. b)Protocol verification techniques fall into two categories, Non-Logical and Logical.Compare both techniques under the headings: (1) Speed of analysis and (2) Bestfor (as in best at detecting/proving what).c)Which key is used to provide authentication between two entities A B usingasymmetric cryptography? Provide an example using suitable notation. Consider a flight-control software that is one of representative com- ponents in avionics. Compare the differences between its traditional software, that is not portable, and a modern portable application and services of the corresponding flight-control software in the standard airborne architecture. IN PYTHONA simple log file tracks users activity and stores the following data in each line The name of the server accessed andThe username of the user who accessed the server andThe date and time (timestamp) when the user accessed the server The following is a line in a log file:file_storage:amaref:2021:12:25:14:45:55This means that on 25th December of the year 2021 at hour 14 and minute 45 and second 55, the user with username amaref accessed the server named file_storage If a user access a server more than once, the file keeps one line per access Write a function named user_analysis that takes as argument the name of the log file, and a username and returns the set of servers the user accessed at least once as shown in the log file. (If a user accesses a server more than once, the server name should be included once in the set).Write a function named server_analysis that takes as argument the name of the log file, a server name, and a date in the form yyyy:mm:dd and prints the number of times each user accessed the server on that particular date. (Note: If a user did not access the server on that date, no need to print this explicitly)Write a function called main that prompts the user to enter the name of the log file and prompts the user to enter a username then properly calls the function user_analysis to find the set of servers the user accessed, then print the returned result prompts the user to enter a server name and a date in the form yyyy:mm:dd to analyze server access who accessed the server then properly calls the function server_analysis to print the number of times each user accessed the server on that particular date what is the radiation (bremsstrahlung) energy loss rate of a2-MeV electron moving in Fe (in MeV/m)? Describe the Binary Tree ADT (definition, set of operations), and its implementations. Show how ordered lists can be implemented by means of binary trees. Explain the efficiency of this implementation and discussed how it can be improved by using 2-3 and 2-3-4 trees. How would you do a SQL query to find out How many reviews were created for each product category that the company had.These are the given datasets:Olist_order_reviews_dataset: review_id, order_id, review_score, review_comment_title, review_comment_message, review_creation_date, review_answer_timestampOlist_products_dataset: product_id, product_category_name, product_name_lenght, product_description_lenght, product_photos_qty, product_weight_g, product_length_cmOlist_customers_dataset: cust_id, zip_code_prefix, city, stateOlist_geolocation_dataset: cust_id, zip_code_prefix, city, stateOlist_order_items_dataset: order_id, order_item_id, product_idOlist_order_payments_dataset: order_id, payment_type, payment_valueOlist_orders_dataset: order_id, cust_id, order_status, order_purchase_timestampOlist_sellers_dataset: seller_id, zip_code_prefix, city, state Produce a plan for a cloud based collaboration solution to meet the client needs, including an explanation of the requirements and technical specifications for the suggested solutionClient requirment :You have recently joined the IT department of a medium size company. All of the company data and applications are currently stored on servers located at the head office, however the IT director is keen to investigate whether cloud technologies would be of benefit to the company. You have been asked to implementing a pilot cloud based collaboration solution for a small department in the company who write technical manuals for the company products. The collaboration system needs to allow the 5 people who work in the department to have cloud based storage areas where they can collaborate on word processed documents and spreadsheets. They also need to be able to share calendar appointments. Users should be able to access the system via at least two different browsers from desktop operating systems and at least one mobile operating system.