The physical security sector differs significantly from the information security industry. It's unlikely that they don't already know everything you worked out. They may have even been aware of your method before going to market.
What is physical security?The physical security sector differs significantly from the information security industry. It's unlikely that they don't already know everything you worked out. They may have even been aware of your method before going to market.
Physical security is not without flaws. It's not even good. Not in contrast to what we have in information technology. Lockpicking, for example, has been widely studied for ages, but most locks on the market today are still very vulnerable.
Going public is sure to enrage people on both sides. However, the only way to change things is to provide not only the problem, but also a financially feasible remedy. Then, rather of pressing the issue, press the answer.
To know more about physical security,
https://brainly.com/question/29239432
#SPJ4
Select three interactivity measurements.
O Number of pages viewed
O Time spent viewing the ad
O Number of repeat visits to an ad
O Website login time stamp
Options a, b and c are complete. The shape of the interaction potential between the individual colloidal spheres either determines or modifies the majority of the physical features of dense colloidal suspensions.
Although the pair potential's current models have been used to achieve qualitative agreement between theoretical and observed phase diagrams and rheological properties, precise measurements are required to ensure quantitative agreement and answer interpretation issues relating to a number of unexplained experimental phenomena.
For instance, researchers are still looking at how temperature, volume fraction, and boundary conditions affect the paired interaction. Pairwise interaction measurements offer precise information about the charge state and local chemical environment of particles in suspension in real-world applications.
Know more about information here:
https://brainly.com/question/19658561
#SPJ4
explain the difference between b1 and b1 between the residual ui and the regression error ui and between ols predicted value yi and e(yi/xi)
The regression error term is ui, while the residual is ei. Most frequently, individuals confuse the two and mix them together. There is a line that can be used to separate the two. The primary distinction between ui and ei is that ei is observable because ei = Yi -Yi, whereas ui is not.
In a linear regression, what do Xi and Yi mean?Take into account the next straightforward linear regression model. Yi = + Xi + I where Yi is the dependent variable for each unit i. (response). The independent variable is Xi (predictor).
What distinguishes error from residual error?The divergence between the observed value and the true value of a quantity of interest constitutes an observation's error (for example, a population mean).
To know more about regression error visit:-
https://brainly.com/question/15875279
#SPJ4
A thermal dispersion sensor's detector monitors the difference in temperature between a heated probe tip and an unheated probe.True/False
True The detector of a thermal dispersion sensor measures the temperature differential between a heated probe tip and an unheated probe.
Difference between thermal dispersion and detector?
The difference between an unheated probe and one with a heated probe tip is tracked by a thermal dispersion sensors detector Capacitor. The thermometer then just uses a sensor to determine its own current temperature and show it together with yours.
A point level measuring device called a sensor consists of two probes that extend from a detector into a vessel, one of which has a HEATED tip. A ferrous alloy's ability to vary in size in response to magnetic stress is known as being magneto strictive. A capacitor is an electronic component made up of two electrical conductors and a dielectric substance.
To learn more about thermal dispersion from given link
brainly.com/question/14230078
#SPJ4
4. The LM317 is an example of an IC A. three-terminal negative voltage regulator B. variable positive voltage regulator C. fixed positive voltage regulator D. switching regulator
5. Analog multiplexer called time-division multiplexer because of: A. It required fixed time period to operate. B. The signals are time overlapped throughout the output. C. The MOSFETs turning on and off half of the time. D. The input signals are time variants. 6. The basic difference between a series regulator and a shunt regulator is: A. the amount of current that can be handled B. the position of the control element C. the type of sample circuit D. the type of error detector
The LM317 is an example of an IC variable positive voltage regulator.
What is regulator?A voltage regulator is a power supply unit component that maintains a consistent voltage supply under all operating situations. It controls voltage during power fluctuations and changes in load. It can control both AC and DC voltages. The cellphone charger is one of the most popular instances. An alternating current signal is fed into the adaptor. The output voltage signal, on the other hand, is a controlled DC signal. To produce the desired output voltage, every power supply in the world employs a voltage regulator.
To know more about regulator,
https://brainly.com/question/27355600
#SPJ4
one of the unresolved problems of flood forecasting is the precise determination of how often a flood (having a given discharge) can be expected to occur. because only a small percentage of all the streams in the united states have been gaged for more than a few decades. it is difficult to determine, for exampie, the loq-year or soo-year flood. consider the data below, which is the instantaneous peak discharge ior rapid creek in rapid city, south dakota, in each of forty-three years of record:
Water Year Discharge (m3/s)
1951 4.05
1952 73.6
1953 4.30
1954 3.90
1955 9.23
1956 3.68
1957 12.3
1958 2.29
1959 2.32
1960 2.32
1961 2.82
1962 37.1
1963 5.41
1964 7.59
1965 17.4
1966 3.96
1967 12.4
1968 5.61
1969 3.94
1970 6.94
1971 10.9
1972 885.0
1973 4.9
1974 14.6
1975 2.61
1976 18.0
1977 5.49
1978 12.3
1979 4.75
1980 3.37
1981 3.74
1982 7.48
1983 8.01
1984 7.05
1985 3.79
1986 2.52
1987 2.80
1988 3.57
1989 3.14
1990 3.51
1991 5.69
1992 2.97
1993 9.29
a. Included in the data is the exceptionally large flood of 1972, which killed 238 people in the Rapid City area, Based simply on the number of years of record and the fact that 1972 flood occurred one time during this interval, how often would a flood of this magnitude be expected?
b. The simplistic approach described above can be improved by a mathematical treatment such as shown in Table 8.2 and Figure 8.20. Using the graph paper below, plot a recurrence curve for the Rapid Creek flood data. [ Hint: Suggest that an eyeball, best fit, straight line plotted through the points, except ignore the 1972 flood. Assume that, because of its magnitude, the 1972 flood does not nicely conform to the rest of the data, and as such. Can be ignored.] What is the 100 year flood discharge?
c. What is the recurrence interval of the 1972 flood, using the curve thus drawn?
d. Given the range of values from a and c above, what can be stated relative to the frequency of floods as large as the one which occurred in 1972?y-three years of record:
Water Year Discharge (m3/s)
1951 4.05
1952 73.6
1953 4.30
1954 3.90
1955 9.23
1956 3.68
1957 12.3
1958 2.29
1959 2.32
1960 2.32
1961 2.82
1962 37.1
1963 5.41
1964 7.59
1965 17.4
1966 3.96
1967 12.4
1968 5.61
1969 3.94
1970 6.94
1971 10.9
1972 885.0
1973 4.9
1974 14.6
1975 2.61
1976 18.0
1977 5.49
1978 12.3
1979 4.75
1980 3.37
1981 3.74
1982 7.48
1983 8.01
1984 7.05
1985 3.79
1986 2.52
1987 2.80
1988 3.57
1989 3.14
1990 3.51
1991 5.69
1992 2.97
1993 9.29
a. Included in the data is the exceptionally large flood of 1972, which killed 238 people in the Rapid City area, Based simply on the number of years of record and the fact that 1972 flood occurred one time during this interval, how often would a flood of this magnitude be expected?
b. The simplistic approach described above can be improved by a mathematical treatment such as shown in Table 8.2 and Figure 8.20. Using the graph paper below, plot a recurrence curve for the Rapid Creek flood data. [ Hint: Suggest that an eyeball, best fit, straight line plotted through the points, except ignore the 1972 flood. Assume that, because of its magnitude, the 1972 flood does not nicely conform to the rest of the data, and as such. Can be ignored.] What is the 100 year flood discharge?
c. What is the recurrence interval of the 1972 flood, using the curve thus drawn?
d. Given the range of values from a and c above, what can be stated relative to the frequency of floods as large as the one which occurred in 1972?
a. Based on the 43 years of record and the fact that the 1972 flood occurred once during this interval, it can be estimated that a flood of this magnitude would be expected to occur once every 43 years, on average.
b. Using the graph paper, plot a recurrence curve for the Rapid Creek flood data. Ignoring the 1972 flood, an eyeball, best fit, and a straight line should be plotted through the points. The 100-year flood discharge can be determined by looking at the point on the graph which is at the 100-year recurrence interval.
c. The recurrence interval of the 1972 flood, using the curve drawn, can be determined by looking at the point on the graph which is nearest to the 1972 flood discharge.
d. Given the range of values from a and c above, it can be stated that floods as large as the one which occurred in 1972 are rare events and occur infrequently.
For more questions like Flood click the link below:
https://brainly.com/question/29578479
#SPJ4
Which of the following are considered best practices for deřning firewall rules? (Choose all that apply)
O All traffic from the trusted network is allowed out.
O The firewall device is sometimes directly accessible from the public network for configuration or management purposes
O SMTP data is allowed to enter, but it is routed through a ICMP gateway.
O All ICMP data should be denied.
O Telnet access should be blocked to all internal servers from public networks.
O HTTP traffic should be allowed when web services are offered outside the firewall.
O All data that is not verifiably authentic should be denied.
Option 3, 5 and 7 are correct. Data from SMTP is accepted. All internal servers should have telnet access restricted on public networks. Any information that cannot be verified as authentic should be rejected.
To prevent problems in the future, it's crucial to take potential security threats into account while changing a firewall setup. Although security is a complicated subject that varies from situation to situation, this article discusses best practices for setting up perimeter firewall rules.
By default, block all traffic, and specifically permit just that which is necessary for known services. This tactic offers strong traffic control and lessens the chance of a breach brought on by a misconfigured service.
By setting the last rule in an access control list to deny all traffic, you can achieve this result. Depending on the platform, you can either expressly or implicitly accomplish this. It is best to be as exact as you can with the criteria you employ to determine network access. The least privilege principle informs this tactic.
Know more about firewall here:
https://brainly.com/question/13098598
#SPJ4
mechanical combustion results from all of the following, except:
Mechanical combustion results from all of the following, except: Electrical lighting.
What is Electrical lighting?Electric lighting has been a part of popular culture since Thomas Edison created a usable incandescent bulb in 1879. It was a major draw at the world's fairs in Chicago in 1894, Buffalo in 1901, and St. Louis in 1904, for instance.
Cities became more hospitable at night thanks to electric lighting; for instance, Broadway earned the nickname the Great White Way thanks to it. Moreover, it added brightness and life to homes.
Unsurprisingly, electric lighting was almost always referred to favorably in popular culture during the first half of the twentieth century. Take the 1931 film "City Lights" by Charlie Chaplin as an illustration. It celebrated indoor and outdoor electric lighting.
Learn more about Electrical lighting
https://brainly.com/question/12579961
#SPJ4
how many variables in structure of steel
Answer:
beginning with A and then two, three, or four numbers.
Explanation:
These steels have an alloy identification beginning with A and then two, three, or four numbers.
In our discussion of the divergence and the curl of vector fields, we indicated that the vector flux representation of these vectors may help us physically understand the divergence and circulation properties of these vectors. For each of the following vectors, draw the flux representation and use your sketch to describe its divergence and circulation properties. Confirm your answers by actually calculating the divergence and the curl of these vectors. (a) A = Kx a, (b) B = ky a (c) C = Kpas (d) D = K a
The divergence and the curl of these vectors is A.
A field of vectors where each vector is directed toward the origin. By dividing our by this quantity, we may determine the circulation density. By utilizing the flux property, expressions for a vector field's divergence in orthogonal curvilinear co-ordinates can be produced.
What is the curl of vector field?
The cross product and dot product may be used to define the divergence and curl in terms of the same odd vector.
The curl and divergence characteristics to assess the conservatism of a vector field.
The field's strength, the area of the surface it goes through, and their alignment all affect the total flux. We suggested that the vector flux description of these vectors could aid in our physical comprehension of their characteristics of divergence and circulation.
To learn more about divergence and circulation properties from given link
https://brainly.com/question/29556255
#SPJ4
with respect to iot security, what term is used to describe the digital and physical vulnerabilities of the iot hardware and software environment?
Attack Surface is the term is used to describe the digital and physical vulnerabilities of the iot hardware and software environment.
What is meant by attack surface?The total number of places (or "attack vectors") where an unauthorised user (the "attacker") might attempt to access or extract data from an environment is the attack surface of a software environment. A fundamental security measure is to minimise the attack surface.An organization's attack surface has grown in size, breadth, and composition as a result of global digital revolution. An attack surface's dimensions might change over time as resources and digital systems are added and removed (e.g. websites, hosts, cloud and mobile apps, etc). Additionally, attack surface sizes might vary quickly. The physical needs of conventional network hardware, servers, data centres, and on-premise networks are not necessary for digital assets.Learn more about attack surface refer to :
https://brainly.com/question/29739920
#SPJ4
The switch in Figure 1. has been in the position 1 for a long time. At t = 0. the switch moves instantaneously to position 2. Draw the circuit for t < 0. and compute , the initial current through the inductor. Indicate the current direction in your figure. Draw the circuit for t >= 0, find , the inductor current, indicate its direction in your figure. Find indicated in Figure 1, for t >= 0. Figure 1. Figure for problem 1.
Think about a Circuit that is supported by a rigid support and hanging from a spring. This is frequently referred to as a spring-mass system.
The circuit is being pulled upward by the restoring force of the spring while being pulled downward by gravity. The mass will fluctuate up and down if it is out of equilibrium. A second-order differential equation with constant coefficients can be used to model this phenomenon. However, because we have said that mg=ks is our equilibrium position, the differential equation becomes
mx″+kx=0.
This equation can be conveniently changed by adding a new variable called the angular frequency, abbreviated. Using k/m as a constant, we can formulate the equation as
x″+ω2x=0.The generic answer to this differential equation exists.
x(t)=c1cosωt+c2sinωt,
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
the results of a multiple regression can be summarized in an anova table. match the terms from anova to their meaning in regression analysis.
Explains the variation for the supplied data and observations by providing an analysis of the model's variance.
What connection exists between ANOVA and regression?Regression is a statistical technique for determining the relationship between groups of variables so that the dependent variable can be predicted using the independent variables. ANOVA, on the other hand, is a statistical technique used to analyse unrelated groups to see if they share a common meaning.
Why are ANOVA and regression similar?From a mathematical perspective, linear regression and ANOVA are equivalent because they both divide the total variance of the data into several "portions" and use the "F" Test to determine if these "sub-variances" are equal.
To know more about ANOVA visit:-
https://brainly.com/question/23638404
#SPJ4
the must be placed on timbers or cribbed so as to spread the weight of the crane
The outrigger needs to be mounted on timbers or cribs so that the weight of the cargo and the crane are distributed over a large enough area.
What is outrigger load?The outrigger load is the force applied to any one of the outriggers during the setup, use, and dismantling of the apparatus. According to b, in order to ensure safety, the rated capacity of the pads should always be more than the equipment's maximum outrigger response force.
A beam that extends from a crane's lowest section helps to increase the crane's stability. Whether they are extendable/retractable or of a fixed length, the beams often use a type of pad to transfer weights to the ground.
Stabilizers and outriggers can be arranged in a variety of ways, depending on the application, to lessen the risk of falling when the combined weight and vehicle's center of gravity is outside the support base of the vehicle. Outriggers lift the car's wheels off the ground; dampers do not.
To learn more about outrigger refer :
brainly.com/question/30071707
#SPJ4
Question-
The __________ must be placed on timbers or cribbed so as to spread the weight of the crane and the load over a large enough area.
wterspectives Excel 2019 Module 4: SAN Alanis Parks Department ANALYZE AND CHART FINANCIAL DATA GETTING STARTED Open the file NP_EX19_4a_FirstLastName_1.xlsx, available for download from the SAM website. Save the file as NP_EX19_4a_FirstLastName_2.xlsx by changing the "1" to a "2". X If you do not see the .xlsx file extension in the Save As dialog box, do not type it. The program will add the file extension for you automatically, with the file NP_EX19_4a_FirstLastName_2.xlsx still open, ensure that your first and last name is displayed in cell B6 of the Documentation sheet. If cell B6 does not display your name, delete the file and download a new copy from the SAM website. B PROJECT STEPS Gudrun Duplessis is a manager in the Alanis Parks Department. Gudrun is compiling spending data in preparation for a city bond offering for park funding. She wants to use Excel to create charts to illustrate some of her data and to apply a function to calculate the potential monthly and yearly costs to the city of different bond scenarios. Switch to the Spending worksheet. In the range E5:E10, add Conditional Formatting to show Solid Blue Data Bars. In the range F5:F10, add Line sparklines based on the data in the range B5:E10. Apply the Blue, Accent 1, Darker 25% (5th column, 5th row in the Theme Colors palette) sparkline color to the range F5:F10. Gudrun has created a pie chart representing the percentage of the parks' budget that went to each park in 2018. Modify the chart in the range G2:020 as follows: Х X Enter 2018 Park Spending as Percentage of Total as the chart title. Change the data labels to include the Category as well as the Percentage, and position the labels in the Outside End location. Remove the Legend from the chart. Gudrun would like a pie chart representing the percentage of the parks' budget that would go to each park in 2021. X Create a 2-D Pie chart based on the data in the range E5:E9 and using the category labels in the range AS:A9. b. Resize and reposition the chart so that the upper-left corner is located within cell G21 and the lower-right corner is located within cell 039, and then left-align the chart with the pie chart above it in the range G2:020. 5. CONC
Answer:
The instructions for this project involve creating conditional formatting and sparklines in a spreadsheet, as well as modifying and creating pie charts based on the data in the spreadsheet. The goal of the project is to illustrate the budget data for the Alanis Parks Department in preparation for a city bond offering for park funding.
Determine the state of stress at point A on the cross section of the post at section a-a. Indicate the results on a differential element at the point.
The state of stress at point A on the cross section of the post at section a-a is, σ = 6.672 MPa
What is stress?Stress is a real physical quantity in continuum mechanics. It is a measure of the strength of the forces that cause deformation. Force per unit area is the definition of stress.
Tensile stress is created when an object is pulled apart by a force, causing elongation, which is also referred to as deformation and is similar to how an elastic band stretches. Compressive stress, on the other hand, is what happens when forces cause an object to compress.
It happens when a body is subjected to forces like compression or tension. The stress increases as the force increases and as the body's cross-sectional area that it acts on decreases. As a result, stress is expressed as newton per square meter (N/m2) or pascal (Pa).
Learn more about stress
https://brainly.com/question/28581356
#SPJ4
Which one of the following is NOT a way to improve the P/Q rating of a company's brand of action-capture cameras? a. Increasing the number of photo modes b. Improving the image quality c. Adding one or two more extra perfunctory functions d. Spending additional money to improve the camera housing e. Spending additional money to improve editing/sharing capabilities
a)Increasing the number of models in the company's line of multi-featured cameras is NOT a way to improve the P/Q rating of a company's brand of action-capture cameras.
what is p/q rating?A URL and a grid to note your observations make up a Page Quality (PQ) rating work, which you can use to direct your investigation of the landing page and the website linked to the URL. Evaluation of the page's effectiveness in achieving its objectives is the ultimate goal of the Page Quality ranking. As you can see, changing some parts, components, or specifications has a greater impact on the P/Q rating than changing other parts, components, or specifications. This shows that some design-related elements have a greater impact on product performance and quality (P/Q ratings) than others. The corporation must allocate more dollars to the development of the cameras' software and controls that are best suited for the camera models in issue if it wants to raise the P/Q rating of the multi-featured cameras.
To know more about P/Q ratings, visit:
https://brainly.com/question/5164638
#SPJ1
4. why is the reactor coolant water kept contained within the primary loop instead of allowing it to mix with the feedwater and leave through the cooling tower?
Yes, it is radioactive and polluted at the same time. They continue to whirl the water for that reason.
Why does the reactor house the cooling water?Two methods are used by the most typical nuclear power stations to cool themselves with water: for the purpose of heating the steam turbines from the reactor core. to drain the extra heat from this steam circuit.
What distinguishes primary coolant from secondary coolant?The reactor core coolant in the primary coolant system is pressurized water. In steam generators, pressurized water's heat is transported to the secondary coolant system, where the secondary coolant system turns water into steam to power turbines.
To know more about cooling tower visit:-
https://brainly.com/question/13507664
#SPJ4
The order of the columns returned by an SQL SELECT statement is determined by the ________.
Select one:
a. order they are listed in following WHERE
b. SORT BY clause
c. order they are listed in following FROM
d. ORDER BY clause
e. order they are listed in following SELECT
The order of the columns returned by an SQL SELECT statement is determined by the order they are listed in following SELECT.
What is SELECT statement?SELECT statement is one of statemen in SQL database that been used to select data from a database. The data that has been select with SELECT statement can be returned and stored in a result table, called the result-set.
SELECT statement will returned the data as it was selected, so the order of the columns will be returned as it was selected.
The other option have the other statement which is SORT BY statement is to sorting the data, the WHERE statement is to filter data, the FROM statement is to specify which data to select or to delete.
Learn more about SQL here:
brainly.com/question/14312429
#SPJ4
In automation, _____ is the flow of information from the machine back to the sensor.
a. feedback
b. agrimation
c. input instruction
d. design
e. control mechanism
In automation, feedback is the information transfer from the machine to the sensor.
What is automation?
By predetermining evaluation method, subprocess relationships, as well as related actions as well as encoding those predeterminations in machines, automation refers to a broad range of technologies that minimise human intervention in processes. Automation has been accomplished using a variety of techniques, most frequently in combination, including mechanical, hydrological, pneumatic, electrical, digital equipment, and computers. Complex systems, including contemporary factories, aircraft, and ships, frequently combine all of these methods. Labor savings, waste reduction, electricity cost savings, material cost savings, and improvements to reliability, accuracy, and precision are all advantages of automation.
To learn more about automation
https://brainly.com/question/26102765
#SPJ4
which of the following troubleshooting methods is based on the troubleshooting experience and the ability of the technician?
Identifies, investigates, and fixes hardware, software, or application issues. Keeps track of and reports on particular technical issues, approaches taken to solving them, and tools employed. Fixes a range of connectivity, hardware, and software issues.
What abilities are necessary for troubleshooting?Technical expertise, patience, empathy, clearly defined processes and procedures, active listening skills, questioning skills, analytical abilities, and a growth mindset are all necessary for good troubleshooting.
What do soft skills troubleshooting entail?It takes quick thinking to pinpoint the root of the problem and put a fix in place. Instead of a hard skill acquired through school or training, problem-solving is regarded as a soft skill (a personal strength).
To know more about Troubleshooting visit:-
brainly.com/question/28157496
#SPJ4
with a digital system, if you have measured incorrectly and use too low of a kvp for adequate penetration, what do you need to do with the next exposure
The x-ray beam's penetrating power is regulated by kVp (beam quality). Every time an exposure is conducted, the x-rays need to be powerful (enough) to sufficiently penetrate through the target area.
How does kVp impact the exposure to digital receptors?The radiation's penetration power and exposure to the image receptor both increase as the kVp value is raised.
Exposure to the image receptor is enhanced with an increase in kVp, right?Due to an increase in photon quantity and penetrability, exposure at the image receptor rises by a factor of five of the change in kVp, doubling the intensity at the detector with a 15% change in kVp.
To know more about kVp visit:-
https://brainly.com/question/17095191
#SPJ4
which of the following is the proper method to access the length of the array arr in javascript? a. arr[subscript].length b. arr[].length c. arr.length d. arr(length)
The correct answer is Option C. arr.length
How to find Array length in JavaThe maximum number of elements that an array in Java can have is known as the array length. The way to determine an array's length is not standardised. The array attribute length in Java can be used to determine the length of an array. This attribute is used along with the array name. This section teaches us how to determine an array's length or size in Java.
The length property can be invoked by using the dot (.) operator followed by the array name. We can find the length of int[], double[], String[] for example,int[] arr=new int[5];
int arrayLength=arr.length
arr is an array of type int that can hold 5 elements. The arrayLength is a variable that stores the length of an array. To find the length of the array, we have used array name (arr) followed by the dot operator and length attribute, respectively. It determines the size of the array.To know more about Array Length in Java Refer to :
https://brainly.com/question/28061186
#SPJ4
How do I buy subscription
You may get a 30-day trial membership and then pay for it. The Business and Professional programmer are our two paid options. You may get a thorough comparison of them here.
To be clear, only workspace owners are permitted to buy subscriptions.
Go to Workspace programmer and choose Subscription to purchase a subscription.
Click the Choose Your Plan button on the page that has appeared.
Pick the size of the team.
Choose the proper pay frequency (annually or monthly).
Select the Professional or Business Plan.
Enter the details for your payment and billing.
Place Order by clicking.
If by mistake you clicked Choose Free Plan, simply click Upgrade Now again and follow the steps above.
Typically, processing an order takes a few seconds. On sometimes, it could take 30 minutes (when the order is being checked). You will be enrolled in the Free Plan up till your order is not finalised.
Learn more about Programmer here:
https://brainly.com/question/17480362
#SPJ4
You can use artistic ________ to change the appearance of a picture so that it looks like it was created with a marker, as a pencil sketch or watercolor painting.
We can use artistic effects to change the appearance of a picture so that it looks like it was created with a marker, as a pencil sketch or water color painting
With the new video effect called "Artistic Effects," you may give your films looks that are based on well-known pieces of art or prominent artistic movements.
You may apply one of 24 artistic styles to your films or pictures.
Open the Adobe Premiere Elements Editor and choose either Quick or Expert. To choose the clip to which you wish to add the artistic effect, click Add Media.
On the right panel, click the icon for applying effects. Select a look from the video effects section's Artistic Effects category. Keep in mind that you can only apply one style to a video clip on the timeline; however, you may apply the effect to all clips by dragging and dropping the selected artistic style onto the display.
Learn more about Effects here:
https://brainly.com/question/18094575
#SPJ4
(1 Declare a reference variable of type File named myFile.
(2) Declare a variable named myMenu suitable for holding references to Menu objects.
(3) Suppose a reference variable of type String called myString has already been declared. Create an object of type String and assign it to the reference variable myString.
The program language we use to declare for those case is Java.
The code for case 1 is,
File myFile;
This code is declaring the new File data type with name myFile in Java.
The code for case 2 is,
Menu myMenu[];
This code is declaring the new Menu objects with name myMenu that can holding references to Menu object.
The code for case 3 is,
myString = new String("Word");
We create string object of "Word" to assigned to myString variable. The myString variable doesn't written in here since the myString variable has been declared in the case.
Learn more about Java here:
brainly.com/question/14610932
#SPJ4
maisie doesn’t limit her time watching enjoyable and relaxing shows on her laptop in the evenings after work and on the weekends because technology has an entirely wholesome effect without any risks. True or fals?
Note that it is FALSE to state that Maisie doesn’t limit her time watching enjoyable and relaxing shows on her laptop in the evenings after work and on the weekends because technology has an entirely wholesome effect without any risks.
What are some of the unwholesome effects of technology?Technology has an impact on practically every element of 21st-century living, from transportation efficiency and safety to food and healthcare availability, sociability, and productivity. The internet's power has made it easier to build worldwide communities and exchange ideas and resources.
Here's what you need to understand about the detrimental effects of the digital world on communication:
Your ability to make visual contact is deteriorating.You're Avoiding Face-to-Face Conversations.You are less at ease with nondigital conversations.You are protecting yourself against conflict as well as conflict resolution.Learn more about the effects of technology:
https://brainly.com/question/15192189
#SPJ1
stream channel size is determined by the combined interaction of sediment discharge, streamflow and what else?
The interaction between sediment discharge and streamflow determines the size of the stream channel. stream channel slope and sediment particle size.
Channel size and form are influenced by the quantity and size of bed sediment, the makeup of the bank material, the kind of channel vegetation (both riparian and in-stream), and the valley topography (slope and breadth). Where the stream velocity is at its peak, the channel's deepest point may be found. Because of the upstream increase in discharge, both breadth and depth rise. The cross sectional form will alter as discharge rises, making the stream deeper and broader. Water and silt move via a streamflow channel that is created by the stream banks. A stream's channel continually modifies itself in response to variations in streamflow, sediment load, stream slope, and vegetation. Because velocity affects competence and, in turn, the range of particle sizes that may be transported, it depends on both the discharge and the velocity.
Learn more about streamflow here:
https://brainly.com/question/14610007
#SPJ4
which of the following is not true regarding the production of corn-based ethanol as an alternative to gasoline in the united states?
Gives us a long-term answer to our energy problems.
What kind of fuel is supposedly used in nuclear reactors of the fusion variety?The two heavy isotopes of hydrogen, deuterium and tritium, are the primary fuels used in nuclear fusion. Only 0,0153% of natural hydrogen is deuterium, which may be easily and cheaply production from seawater. Lithium, which is also widely distributed in nature, can be used to create tritium.
Which issue with the environment may be made worse by the usage of gas hydrates as a fuel?Methane is a powerful greenhouse gas in and of itself, and some researchers have hypothesised that methanen produced by gas hydrate breakdown during previous climate events may have made global warming worse.
To know more about production visit:-
https://brainly.com/question/29423646
#SPJ4
12 -01 亭 2 points Select each item applies to agile project plans O Gantt charts are required for a project. O Once a plan is made, it can no longer be changed O Long-term plans normally have less details than short-term plans O There are multiple plans 13 -100 2 points Select each item applies to frequent release O To reduce testing efforts, test are often automated O It lowers product quality O It allows quicker return on investment O It mitigates the well-known planning failure mode of discovering delays very late 14 & 2 points Select each unit used in agile estimation O function-points O user story points O Ideal days O person-month
The item that applied to agile project plans is first and third option, the item that applied to frequent release is first and third option, the unit that been used in agile estimation is the first and second option.
What is Agile project plans?Agile project plans is a plan in Agile software development to create project management in iterative approach and with incremental style.
Since, it use iterative approach and incremental style the Agile project plans can change the plan so it don't need multiple plans and for long-term project usually doesn't have detail because it can change over time. To visualization project task schedule it need Gantt charts.
Frequent release is to give product to hand of end user, listening their feedback, and anything that associated with that. It is can give business a reduced testing effort since the end user will testing it and also since it released into end user it can make ROI quickly.
The agile estimation use function point and story point. Function point is based on logical conception and story point based on perception.
Learn more about Agile here:
brainly.com/question/28123106
#SPJ4
A layer of saturated, normally consolidated clay is 30 feet thick. The water content of the Clay is 65% and the specific gravity of solids is 2.72. Consolidation tests on the clay indicate a compression index, Cc, of 0.58. Five feet of sand with a total unit weight of 122 lbs./cu.ft overlie the clay. Very dense sand underlies the clay. Development of the site will require that 10 feet of sand be placed on the surface of the deposit described above. The fill will have a water content of 8% and a dry unit weight of 108 lbs/cu.ft. The water table is currently at the top of the clay layer and is expected to remain there after the fill is built and settlement occurs. 1.
The approximate settlement of the deposit due to the fill is 13.7 ft.
What is deposit?
A deposit is the act of giving money (or money equivalents) to an organisation, most frequently a bank or other financial institution. The deposit is indeed a credit for the party that made it (individually or as a group), and it can be refunded (withdrawn) in accordance with the terms set forth at the time of deposit, transferred to another party, or applied to a future purchase. The primary funding source for banks is typically deposits.
The approximate settlement of the deposit due to the fill can be computed by using the Terzaghi Settlement formula:
S = (γ_d - γ_s)*H*Cc*e^(1+(m/Cc))
where S is the settlement (in feet), γ_d is the dry unit weight of the fill material (in lb/cu.ft), γ_s is the dry unit weight of the underlying soil (in lb/cu.ft), H is the height of the fill (in feet), Cc is the compression index of the underlying soil, and m is the coefficient of compressibility of the underlying soil.
For this problem, γ_d = 108 lb/cu.ft, γ_s = 122 lb/cu.ft, H = 10 ft, Cc = 0.58, and m = 0.
Therefore, the approximate settlement of the deposit due to the fill is:
S = (108 - 122)*10*0.58*e^(1+(0/0.58)) = -13.7 ft
To learn more about deposit
https://brainly.com/question/28737197
#SPJ4
