Identify the part of the information processing cycle described by each of the items below.

A student types text into a word processing program.

The computer checks and compares all words entered to find misspellings.

The computer shows possible misspellings on the screen.

You save the revised document to the hard disk.

CDs and DVDs are examples of

The line of code that assigns a char variable outputGames with the value the gamesPointer points to is known to be:

The instructions a programmer is known to often writes when making  a program is known to be the code line.

Note that the Lines of code are seen as the "source code" of any kind of a program, and one line is one that can be used to make or generate a single machine instruction or a lot of it based on the programming language.

Hence,  A line of code in assembly language is seen to be turned into a single machine instruction.

Therefore, The line of code that assigns a char variable outputGames with the value the gamesPointer points to is known to be:

Learn more about codes  line of code from

https://brainly.com/question/25875879

#SPJ1

Answer:

ddos

Explanation:

DDOS (Distributed Denial Of Service) is more effective becaause it utilizes many computer systems for the attack, mostly botnets.

Answer:

There is no cryptographic significance to the use of decryption for the second stage. Its only advantage is that it allows users of 3DES to decrypt data encrypted by users of the older single DES by repeating the key.

The data be impacted if you set a condition filter for sum of cars sold greater than 100 as the dashboard will only depict the cities that has more than 100 cars are sold.

Image or page filtering is known to be the act of altering or changing the form of an image and also reducing a page to the items that one wants.

Note that in filtering, it tends to bring about those areas that one has interest in and as such, in the case above, The data be impacted if you set a condition filter for sum of cars sold greater than 100 as the dashboard will only depict the cities that has more than 100 cars are sold.

Learn more about filter from

https://brainly.com/question/3198358

#SPJ1

CIDR stands for Classless Inter-Domain Routing.

CIDR is an acronym for Classless Inter-Domain Routing, and it is considered a method for allocating IP addresses and for routing.

It was in 1993 that CIDR was introduced by the Internet Engineering Task Force, and since then this method has been used to replace the previous architecture that addressed networks.

Its main function was to slow down the growth of the tables that contained the routings of the routers in the network. In this way, it was possible to help slow down how quickly IPv4 addresses were reaching.

See more about computing at: brainly.com/question/13805692

#SPJ1

When a client performs a stabilization workout on Monday, The kind of periodization that is being used for their mesocycle is Undulating periodization.

Undulating periodization is known to be a kind of training that entails a lot of volume and intensity that often go up and down, and it is one that is often done weekly or daily, in course of the training period.

Note that a Weekly undulating periodization (WUP) alters the volume and intensity from  week to week and this is also seen as a program that has a dynamic scheme that gives room for weekly and daily fluctuations.

Hence, When a client performs a stabilization workout on Monday, The kind of periodization that is being used for their mesocycle is Undulating periodization.

Learn more about periodization from

https://brainly.com/question/714921

#SPJ1

The system tray is usually on the right side of the taskbar and displays open services.

The official name for that which is found in the bottom of the screen is known to be called a “taskbar”.

Note that the taskbar is said to be made up of a number of elements, such as the “Start Button”, and others.

The system tray (or known to be "systray") is said to be an aspect of the taskbars in the Microsoft Windows operating system (OS) user interface that helps one to have a kind of easy access icons to the most commonly used apps.

Therefore, The system tray is usually on the right side of the taskbar and displays open services.

Learn more about system tray from

https://brainly.com/question/17667656

#SPJ1

A DNS control standard describes the requirements for obtaining a domain name for use by external parties.

A domain name is a name that is easy and easy to remember. The name is used for online websites for companies or vlogs that contain an IP address on the internet. It is like the street address.

The DNS control system is a system that is used by every domain name user. It controls how visitors would see the website and how they will receive emails.

Thus, the standard requirement for obtaining a domain name is the DNS control standard.

To learn more about the domain name, refer to the below link:

https://brainly.com/question/3044569

#SPJ1

A raptor program that will display the count from 100 to 0 in decrements of 5 is shown below.

This refers to a programming environment that works on a flowchart basis to help the user to present their algorithms in a visual manner.

Using a raptor program, you can display a count from 100 to 0 in decrements of 5 as shown:

#include <iostream>

#include <string>

using namespace std;

int main()

{

int count;

Count =100;

while (Count<=0)

{

cout << Count << endl;

Count =Count-5;

}

return 0;

}

The result would be a list showing numbers that go from 100 to 0 in decrements of 5.

Find out more on raptor programs at https://brainly.com/question/15082977

#SPJ1

Answer:

Storage.

Explanation:

I ran into this question before

Answer:

Storage

Explanation:

I've seen this question in a quiz before.

The sizing handles is known to be the small squares that appear in the corners and in the middle of the sides of a selected object's border.

The term sizing handles is known to be a tool that a person can use to be able to change a picture's size.

Note that if the mouse pointer is placed on a key that is of the sizing handles, the pointer alters to a double-headed arrow and a person can be able to then alter the size or shape of the image by dragging the sizing handle.

Note that it is often called handle, drag handle, sizing grip, resize corner, and therefore, The sizing handles is known to be the small squares that appear in the corners and in the middle of the sides of a selected object's border.

Learn more about sizing handles from

https://brainly.com/question/8806816

#SPJ1

A process called traffic analysis examines the data packets that flow through a system and its associated devices to identify the most frequently used devices.

Network traffic analysis (NTA) is known to be a kind of a way or a method that is often used in the monitoring network availability and it is also seen as an activity that one is engaged in so as  to know or see anomalies, such as security and operational issues.

Note that the Common use are in regards to cases such as in the Collecting of what we call the real-time and historical record of the things that are happening on your network, and also in the Detecting malware such as ransomware issues or works..

Hence, A process called traffic analysis examines the data packets that flow through a system and its associated devices to identify the most frequently used devices.

Learn more about traffic analysis from

https://brainly.com/question/27227256

#SPJ1

The cross join is the type of join that is used to create the query.

This is the term that is used in database programming in order to refer to the select statement that helps in the combination of the records that are contained in two different tables.

The condition that this is used to make happen is what is called the Join statement. There are different types of this type of condition. They are:

A: Explicit inner join

B: Implicit inner join

C: Outer join

D: Cross join

Read more on database here:  https://brainly.com/question/518894

#SPJ1

The total possible load a stream can transport is its Capacity, whereas a stream's ability to move particles of specific size is its competence .

The bed load is known to be an aspect or a part of a stream's load that is known to be a lot larger in nature and it is to be carried in suspension.

Note that Capacity is said to be directly associated to a stream's discharge. and that of Deposition. But if  it slows down, the stream/river is one that will not be able to carry large particles anymore, so they lower to the ground.

Hence, based on the above, The total possible load a stream can transport is its Capacity, whereas a stream's ability to move particles of specific size is its competence .

Learn more about competence from

https://brainly.com/question/26437783

#SPJ1

The main difference between true experimental designs and quasi-experimental designs is that rue experimental designs use random assignments and quasi-designs do not.

An experimental design is any type of procedure during experimentation used to test a given explanation of a hypothesis by employing the scientific method.

Experimental designs are randomized in order to avoid any type of biases that may alter the collected data from the sampling method.

In conclusion, the main difference between true experimental designs and quasi-experimental designs is that rue experimental designs use random assignments and quasi-designs do not.

Learn more about experimental designs here:

https://brainly.com/question/17280313

#SPJ1

The assertion that PKI is a federal information processing standard that specified an algorithm to replace DES and 3DES is FALSE.

The Public Key Infrastructure (PKI) is a framework which is used to support encryption, and authentication of certificates so that businesses are secure.

There is a federal information processing standard which is used to specify a cryptographic algorithm and this standard. This then replaced DES and 3DES. It is called the Advanced Encryption Standard (AES).

Find out more on the Public Key Infrastructure at https://brainly.com/question/10651021

#SPJ1

Answer: a. Fire

Explanation:

The greatest threat to any computer installation would most likely be a fire. Setting up/installing your computer can be a complicated process where fires can be started if you have power running when it shouldn't.

Sabotage might be the greatest risk to any computer installation. The correct option is B.

Thus, Intentional harm or disruption of computer systems, networks, or data by people with malicious purpose is referred to as sabotage.

It may involve intentional alteration of data to harm or disrupt, the introduction of viruses or malware, unlawful access to private information, or hacking.

Sabotage poses a substantial risk to computer installations and the businesses that depend on them because it can result in lengthy downtime, the loss of crucial data, monetary losses, and weakened cybersecurity.

Thus, Sabotage might be the greatest risk to any computer installation. The correct option is B.

Learn more about Sabotage, refer to the link:

https://brainly.com/question/34707842

#SPJ7

Answer:

report header

Explanation:

,,,,,,,,,,,

The most common format used for data modeling is  C. entity-relationship diagramming.

Data modeling in software engineering  can be regarded as the  process involving the  creation of  a data model  that is been used in processing  information system by applying certain formal techniques.

It should be noted that there are different types of modelling but The most common format used for data modeling is  C. entity-relationship diagramming.

Learn more about Data modeling on:

https://brainly.com/question/27250492

#SPJ1

The major difference between on-premises identity services and those used in a cloud-hosted environment is to deliver account and/or identity management.

In computers, a cloud service can be defined as a type of help in which the company may deliver a service on the internet such as, data storage.

Important companies that provide cloud services over the Internet  (e.g., Amazon Web Services) may handle essential information such as account and/or identity management.

In conclusion, the major difference between on-premises identity services and those used in a cloud-hosted environment is that cloud services can deliver account and/or identity management.

Learn more about cloud computing services here:

https://brainly.com/question/19057393

#SPJ1

Answer:

Information processing model

Hope it helps!

Typically a personal computer uses a(n) internal disk to store the operating system and software applications.

This is known to be a kind of  tape, disk, optical that tends to drive or that is seen inside the case of any given desktop or laptop computer.

Note that An internal drive is one that gets its power from the central  power supply and the other types of storage devices are:

Therefore, Typically a personal computer uses a(n) internal disk to store the operating system and software applications.

Learn more about personal computer from

https://brainly.com/question/4945544

#SPJ1

TCP as an connection-oriented protocol ]uses a three-way handshake to establish a connection to a system port and the packet that does the above i and 2 are: SYN/ACK

Client requests connection is one that is often done by sending SYN kind of (synchronize) message to the server.

Note that the Server is one that acknowledges by transmitting SYN-ACK (synchronize-acknowledge) message back to its client.

Hence, the  Client often responds using an ACK ( which is an acknowledge) message, and the connection is  said to be set up or established.

Hence, TCP as an connection-oriented protocol ]uses a three-way handshake to establish a connection to a system port and the packet that does the above i and 2 are: SYN/ACK

Learn more about TCP  from

https://brainly.com/question/27742993

#SPJ1

Option 1. The tier one supplier is the one that is hired to provide products or services directly to a lead firm.

This is the term that is used to refer to the producers that have to make the goods and the services available before they send it to the retailers who then make it available for the people that are going to consume the product that is in question.

The tier one supplier can be referred to as those supplies that one would have to have a direct business dealing with to contracted firms and other production partners that help in the distribution of products.

Hence we can say that the  tier one supplier is the one that is hired to provide products or services directly to a lead firm.

Read more on supplier here: https://brainly.com/question/26500183

#SPJ1

Answer:

access to the World Wide Web, digital video, digital audio, shared use of application and storage servers

The information on Lenovo support which are considered restricted include the following:

A computer can be defined as an electronic device that is designed and developed by a tech company such as Lenovo, to receive data in its raw form as an input and it processes these data into an output (information), which can be used to perform a specific task through the use of the following computer parts:

A classified source material can be defined as an information source that comprises very important, restricted, and sensitive information that must only be shared and disseminated secretly with authorized persons.

In this context, we can infer and logically deduce that the information on Lenovo support which are considered restricted include the following:

Read more on classified source material here: https://brainly.com/question/15346759

#SPJ1

Answer:A

Explanation:just got it right

When you create a variable in a video game program you may hold a spot in the computer's memory for a piece of data that it will need later. Thus, the correct option for this question is A.

In programming, a variable is a value that can be modified or altered with respect to the conditions or the nature and type of information that have to be passed onto the program.

According to the context of this question, a variable has multiple functions in the sequence of programming. These variables are utilized in order to store information that has to be referenced and manipulated within a computer program. Another function of variable is that they also provide a way of labeling the components of programming.

Therefore, you may hold a spot in the computer's memory for a piece of data that it will need later is the action of a variable that you create in a video game program. Thus, the correct option for this question is A.

To learn more about Variable in programming, refer to the link:

https://brainly.com/question/9238988

#SPJ2

When a database stores view data, it uses a materialized view that depends on data in a corresponding view table. The correct option is 4.

A database is a collection of data in an organized and easy way. They store electronic data and manipulate it. An example is an online telephone directory that saves people's contact, name, and addresses.

The materialized view is an organized view of data in the system, and the view table is the table where all the data can be viewed.

Thus, the correct option is 4. Materialized view, view table.

To learn more about the database, refer to the below link:

https://brainly.com/question/25198459

#SPJ1

The question is incomplete. Your most probably complete question is given below:

1. base table, view table

2. materialized view, base table

3. view table, materialized view

4. materialized view, view table

Office automation systems focus on managing documents, communicating, and scheduling. The correct option is D.

An office automation system is a tool from which data can be transferred from one system to another system without using manpower, or without human interventions. Examples are slack, Zoom video calls, Microsoft video calls, etc.

They are used to analyze, collect, and share data. They manage tasks easily, they also manage business process management software.

Thus, the correct option is D. office automation systems.

To learn more about the Office automation system, refer to the below link:

https://brainly.com/question/15131330

#SPJ1

Answer:

This tefers to how nodes are connected to the network.

Types of topology.

In physical topology,nodes are connected physically using wires(cables).

Types of physical topology include:

Hope it helps you,any question so far...comment !!!

[tex]\huge\mathcal{♨ANSWER♥}[/tex]

Geometric representation of how the computers are connected to each other is known as topology. There are five types of topology.

They are,

Bus topology, also known as line topology, is a type of network topology in which all devices in the network are connected by one central RJ-45 network cable or coaxial cable. The single cable, where all data is transmitted between devices, is referred to as the bus, backbone, or trunk.

Ring topology is a type of network topology in which each device is connected to two other devices on either side via an RJ-45 cable or coaxial cable. This forms a circular ring of connected devices which gives it its name. Data is commonly transferred in one direction along the ring, known as a unidirectional ring.

Star topology is an implementation of a spoke–hub distribution paradigm in computer networks. In a star network, every host is connected to a central hub. In its simplest form, one central hub acts as a conduit to transmit messages. The star topology is one of the most common computer network topologies.

A mesh topology is a network setup where each computer and network device is interconnected with one another. This topology setup allows for most transmissions to be distributed even if one of the connections goes down. It is a topology commonly used for wireless networks.

A tree topology is a special type of structure where many connected elements are arranged like the branches of a tree. For example, tree topologies are frequently used to organize the computers in a corporate network, or the information in a database.

☆...hope this helps...☆

_♡_mashi_♡_