Answer:0.100
Explanation:
how did buddhism spread to china?
Answer:
It is widely believed that Buddhism entered China via the Silk Road under the Han Dynasty. After trade and travel was established with the Yuezhi, who by that time were forced southward toward India, Yuezhi monks began to travel with the merchant caravans; preaching their religion along the Silk Road.
Explanation:
i got this from google
Is it illegal for fracking companies to let water that has been used for fracking deep back into the ground ?
Answer:
It is illegal
Explanation:
Fracking involves drilling deep into the earth crust in which a water mixture with high pressure is directed at the rock with the purpose of releasing the gas inside. This process is common in the exploration of natural gas and other hydrocarbons.
It is however illegal because the water are mostly contaminated due to the hydrocarbons present and harmful to life. It is advisable and the best to remove the water and recycle them in treatment plants
When will the simping end
Answer:
Nvr XD
Explanation:
Answer:
the world may never know
Explanation:
help me name the molecule
Answer:
ether
Explanation:
ether is -OR
- Hope that helps! Please let me know if you need further explanation.
What mass of solute is needed to prepare each of the following solutions?
a. 1.00 L of 0.125 M K2SO4
b. 375 mL of 0.015 M NaF
c. 500 mL of 0.350 M C6H12O6
Answer:
a. 21.7824 g
b. 0.2362 g
c. 31.5273 g
Please see the answers in the picture attached below.
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
The mass of solute required in each case can be obtained form the stoichiometry of the reaction.
We know that the mass of each solution can be obtained from the relation;
mass/molar mass = concentration × volume
mass = concentration × volume × molar mass
a)
mass = 0.125 M × 1.00 L × 174 g/mol = 21.75 g
b) mass = 0.015 M × 375 /1000 × 42 g/mol = 0.24 g
c) mass = 0.350 M × 500/1000 × 180 g/mol =31.5 g
Learn more: https://brainly.com/question/9743981
Why does the addition of a solute lower the freezing point of a solution?
A The solute is colder than the solvent.
B The solute disrupts crystal formation by the solvent.
C The solute tends to sink to the bottom of the solution.
D The solute has bigger molecules than the solvent.
Answer:
B
Explanation:
Many grasses and few trees characterize ____________ (tundras/temperate grasslands).
What mass in grams of hydrogen is produced by the reaction of 2.0 g of magnesium? (Make sure to balance the reaction first)
Mg(s) + H2O(1) --> Mg(OH)2(s) + H2 (8)
Answer:
0.164541341 g H2
Explanation:
1) Convert grams to moles by dividing by RMM of Magnesium (24.31g).
2g Mg * (1 mol Mg / 24.31 g Mg) = 0.082270671 mol of Mg
2) Use the balanced equation's ratio of 1 mol Mg: 1 mol H2.
0.082270671 mol of Mg = 0.082270671 mol of H2
3) Convert the mol of H2 back into grams by multiplying by H2's RMM (2 g).
0.082270671 mol of H2 * 2 g H2 = 0.164541341 g H2
* Answer can be rounded to your liking *
* I’ll give you brainlist* The skeletal system has many functions. Which of the following body functions does the skeletal system NOT do?
Answer:
A) remove germs from the blood
Explanation:
cause the rest are the skeletal system function
Answer:
The skeletal system does not remove germs from the blood
Explanation:
I learned that from my teacher
In the following reaction 6.13g of water (H,O) is produced the theoretical
yield of water (H,O) is 8.17g, what is the percent yield of water?*
C3H8+ 5 O2 → 3 CO2 + 4 H2O
85.0%
72.0%
75.0%
0 67.0%
The pressure of a gas in a cylinder when it is heated to a temperature of 250k is 1.5 atm. What was the initial temperature of the gas if it’s initial pressure was 1 atm?
Answer:
[tex]T1=166.66K[/tex]
Explanation:
According to Gay-Lussac’s law simply states that the ratio of the initial pressure and temperature is equal to the ratio of the final pressure and temperature for a gas of a fixed provided that the mass is kept at a constant volume.
Given:
Initial pressure, P1 = 1 atm
Final pressure, P2 = 1.5 atm
Final temperature, T2 = 250 K
The law can be applied using the below formula
P1T2 = P2T1
Then,
T1 = (P1T2)/P1 = (1*250)/(1.5) = 166.66 Kelvin.
[tex]T1=166.66K[/tex]
:
Answer:
[tex]T_1=166.7K[/tex]
Explanation:
Hello,
In this case, by applying the Gay-Lussac's law which help us to understand the pressure-temperature gas behavior via a directly proportional relationship:
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
In such a way, as we are asked to compute the initial temperature knowing the initial pressure and final both temperature and pressure, so we solve for it:
[tex]T_1=\frac{T_2P_1}{P_2}=\frac{250K*1atm}{1.5atm} \\\\T_1=166.7K[/tex]
Best regards.
Analysis: The limiting reactant(s) appeared to be
because
there is nothing with which it can react
Explanation:
The limiting reactant(s) prevents a reaction from continuing because there is none left.
Why do limiting reactants occur?Identification of the limiting reactant makes it possible to calculate the theoretical yield of a reaction. The reason there is a limiting reactant is that elements and compounds react according to the mole ratio between them in a balanced chemical equation.
How do you get the limiting reactant?The reactant that is consumed first and limits the amount of product(s) that can be obtained is the limiting reactant. To identify the limiting reactant, calculate the number of moles of each reactant present and compare this ratio to the mole ratio of the reactants in the balanced chemical equation.
Learn more about Limiting Reactant(s) here
https://brainly.com/question/14225536
#SPJ2
Help please! I don’t know what subject to pick this is science tho!!!!!!!!!!!!!!!
Answer:
C.
Explanation:
Because it decreases from October trough december
How do I solve this? Please help.
How much heat is required to raise the temperature of 179g of acetic acid, CH3COOH, from 250C to 82.70C?
Answer: The heat required to raise the temperature of 179 g of acetic acid, is 21000 Joules
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=m\times c\times \Delta T[/tex]
Q = Heat absorbed = ?
m = mass of acetic acid = 179 g
c = heat capacity of acetic acid = [tex]2.043J/g^0C[/tex]
Initial temperature = [tex]T_i[/tex] = [tex]25^0C[/tex]
Final temperature = [tex]T_f[/tex] = [tex]82.7^0C[/tex]
Change in temperature ,[tex]\Delta T=T_f-T_i=(82.7-25)^0C=57.7^0C[/tex]
Putting in the values, we get:
[tex]Q=179g\times 2.043J/g^0C\times 57.7^0C=21100J[/tex]
Thus heat required to raise the temperature of 179 g of acetic acid, is 21000 Joules
what is the diffrence between displacement ans double displacement reactions write equations for these reactions
Answer:
Single Displacement reaction
In a displacement reaction, a more reactive element replaces a less reactive element from a compound.
Change in colour takes place with no precipitate forms.
Metals react with the salt solution of another metal.
Examples:
2KI + Cl2 → 2KCl + I2
CuSO4 + Zn → ZnSO4 + Cu
Double displacement reaction
In a double displacement reaction, two atoms or a group of atoms switch places to form new compounds.
Precipitate is formed.
Salt solutions of two different metals react with each other.
Examples:
Na2SO4 + BaCl2 → BaSO4 + 2NaCl
2KBr + BaCl2 → 2KCl + BaBr2
Hope this helps...Please Mark as Brainliest!!
A 0.80 L sample of gas has a temperature of 27°C and a pressure of 0.925 atm. How many moles of gas are present?
Answer:
n= 0.03 moles
Explanation:
Using the ideal gas law:
PV=nRT
nRT=PV
n= PV/RT
n: moles
P: pressure in atm
V= volume in L
R= Avogadro's constant = 0.0821
T= Temperature in K => ºC+273.15
n= (0.925 atm)(0.80 L) / (0.0821)(300.15 K)
n= 0.03 moles
Which is not a reason that water is used to store spent fuel rods from nuclear power plants?
Water increases the speed of the chain reaction in the fuel rods.
Water protects nuclear power plant workers from the high temperature and radiation of the fuel rods.
Water acts as a radiation shield to reduce the radiation levels.
Water cools the spent rods.
Answer:
I believe the answer would be A
AgCl is..
A)an element
B)a compound
C.)a mixture
Answer:
(B)
Explanation:
Silver chloride is a simple ionic compound consisting of the silver cation (Ag+) and chloride anion (Cl-).
A 30.0 L container was filled by pumping into it 10.0 L of CO2 gas at 60.0 torr of pressure and 20.0 L of O2 gas at 50.0 torr of pressure. All volumes and pressures were measured at the same temperature. What is the final pressure of CO2 in this mixture?
The final volume of the Oxygen O2 would simply be equivalent to the overall volume of the final mixture. This is because gases would occupy every space of its container. So in this case, the volume of CO2 and O2 would be the same and it would be 30 L. What would be different is the partial pressures of each.
Answer:
30 L
Describe the benefits of using nanoparticles instead of other, larger technology.
Answer:
it has a huge surface-to-volume ratio, very high porosity and completely different physiochemical properties.
Explanation:
idk if the answer is good !
sorry
As SCUBA divers go deeper underwater, the pressure from the weight of all the water above them increases tremendously
which compresses the gases in their blood. What happens to the volume of gas in their blood as the diver rises quickly to
the surface?
A As a diver rises, the pressure on their body increases which allows the volume of the gas to decrease.
B. As a diver rises, the pressure on their body decreases which allows the volume of the gas to decrease.
c. As a diver rises, the pressure on their body increases which allows the volume of the gas to increase.
D. As a diver rises, the pressure on their body decreases which allows the volume of the gas to increase.
Answer:
b
Explanation:
What is similar about igneous rock and metamorphic rock formation?
Answer:
I think they both need heat.
Explanation:
calculate the density of a solid that has a volume of 2cm3 and a mass of 3g
Answer:
The density is 6
Explanation:
p = m × v
p = 3 × 2
p = 6
Hope this helped! :)
The density of the substance depends on the mass and the volume of the substance or object. It is given by the ratio of mass and volume. The density of 3 gm solid is 1.5 g/cm³.
What is density?In chemistry and physics, density is a quantitative measurement that tells about the tightness of the substance packed in an area. It relates to two parameters that include mass and volume.
The density can be said to have a proportion of mass to the volume of the substance. The mass can be in grams or kilograms, while volume can be in a liter, cubic meter, and cubic centimeter.
Given,
Mass of solid (M) = 3 gm
The volume of solid (V) = 2 cm³
Density (ρ) is calculated as:
ρ = M ÷ V
= 3 ÷ 2
= 1.5 gm/cm³
Therefore, 1.5 gm/cm³ is the density of 3 gm solid.
Learn more about density here:
https://brainly.com/question/19642139
#SPJ2
Coal contains carbon and other elements. Carbon dioxide forms when coal burns in the presence of oxygen. Which of these is the best evidence that a chemical reaction occurs when coal burns? Select one: A new substance is produced. Coal is made up of more than one element The shape of the coal changes. Oxygen is present.
Answer:
a new substance is produced
Explanation:
i just took my test and got this question right
The best evidence that a chemical reaction occurs when coal burns is a new substance is produced. The correct option is A.
What is coal?Coal is a carbon containing fossil fuel, which is formed when the organic matter is decomposed inside the earth with heat and pressure by the earth crust. It is the most used fossil fuel.
Carbon dioxide is a gas produce when these fossils fuel burned. It is a green house gas and increase the warmth of the earth when produced. It is taken by plants to make their food.
When coal burns, it produces carbon dioxide which is a gas and coal is a solid, so here the chemical reaction is happening which is producing a new substance.
Thus, the correct option is A. A new substance is produced.
To learn more about coal, refer to the link:
https://brainly.com/question/26411066
#SPJ6
In the water cycle diagram above, which letter represents
groundwater?
Select One:
Q
S
T
R
Answer:t
Explanation:bc
A sample of air has a volume of 140.0 mL at 67C. To w
hat temperature must the gas
be lowered to reduce its volume to 50.0 mL at constant pressure?
Answer:
What that means is that when pressure and number of moles are kept constant, increasing the temperature will result in an increase in volume. Likewise, a decrease in temperature will result in a decrease in volume. In your case, the volume of the gas decreased by a factor of about 3, from "140.0 mL" to "50.0 mL".
what is whether? what is climate? Does todays weather impact climate?
Answer:
Weather is the state in which a certain part inside the atmosphere is hot or cold.Climate is the usual weather in a certain place in the world or atmosphere.One way weather can affect climate is global warming,which is when the world gets hotter and the ice in the world melts and water rises.
Explanation:
climate can be defined as the long-term weather.
Sulfuric acid (H2SO4) has a molar mass of 98.1 g/mol. How many oxygen atoms are found in 75.0 g of H2SO4? A. 1.15 × 10^23 B. 1.84 × 10^24 C. 4.61 × 10^23 D. 7.87 × 10^23
Answer:
B
Explanation:
first find the no. Of moles of H2SO4
= 75/98.1
= 0.7645
Next step
In on mole of H2SO4 the no.of oxygen atom is 4.
1 H2SO4 : 4 O
0.7645 : x x= 0.7645x4= 3.0581
next multiply avogadros constant
3.0581 x 6.022× 10^23 =1.84x10^24
Mass present in 1 gram of mole substance is called molar mass. Molar mass is calculated by: dividing the mass of the compound in grams by the number of moles present in the substances.
The correct answer is:
option B. 1.84 × 10²⁴
Given,
The mass of sulfuric acid =75.0 gThe molar mass of sulfuric acid = 98.1 g/mol
1.The moles of sulfuric acid can be calculated by
M = m ÷ n
where M is molar mass, m is mass and n moles.
moles of sulfuric acid = mass ÷ molar mass
= 75 g ÷ 98.1 g/mol
=0.7645 moles
Hence moles of sulfuric acid present is 0.7645 moles.
2. 1 mole of sulfuric acid = 4 oxygen atoms.
Then, 0.7645 moles of sulfuric will contain: 0.7645 × 4 = 3.0581 atoms of oxygen
3. Oxygen atoms present in 75.0 g of H₂SO₄ will be calculated by multiplying it with Avogadro's constant:
= 3.0581 x 6.022× 10²³
= 1.84x10²⁴
Therefore, 1.84 × 10²⁴ oxygen atoms will be found in 75.0 g of H₂SO₄.
To learn more about moles follow the given link:
https://brainly.com/question/20486415
Temperature and volume are
_____ related, which means as temperature______
the volume decreases.
Answer:
They are directly related.
Temp decrease then volume decrease
Temp increase then volume increase
1. Why is hot air hot?
Answer:
Explanation:
Radiation from the sun heats the ground, then the ground heats the air by process of conduction. When that happens air temp. and density start to change causing air convection currents. Hope I help.
