If 2.18 g of sodium peroxide (Na2O2) react with water to produce sodium hydroxide abs oxygen, how many liters of oxygen will be produced at 17.7 Celsius abs 726 torr?

Answer:

The volume of the gas is fixed and will not change.

Explanation:

The volume of the gas will not change because there is no change in temperature. Temperature increases the volume of gases enclosed in a container.

Answer: There are 0.779 moles of gas were added to the bottle.

Explanation:

Given: [tex]n_{1}[/tex] = 0.650 mol,     [tex]P_{1}[/tex] = 730 mm Hg (1 mm Hg = 0.00131579 atm) = 0.96 atm

[tex]n_{2}[/tex] = ?,           [tex]P_{2}[/tex] = 1.15 atm

Formula used is as follows.

[tex]\frac{P_{1}}{n_{1}} = \frac{P_{2}}{n_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}}{n_{1}} = \frac{P_{2}}{n_{2}}\\\frac{0.96 atm}{0.650 mol} = \frac{1.15 atm}{n_{2}}\\n_{2} = 0.779 mol[/tex]

Thus, we can conclude that there are 0.779 moles of gas were added to the bottle.

Answer:

0.5024 g

Explanation:

Step 1: Calculate the concentration of H⁺

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -12.40 = 3.981 × 10⁻¹³ M

Step 2: Calculate the concentration of OH⁻

We will use the ionic product of water expression.

[H⁺] [OH⁻] = 10⁻¹⁴

[OH⁻] = 10⁻¹⁴/[H⁺] = 10⁻¹⁴/3.981 × 10⁻¹³ = 0.02512 M

Step 3: Calculate the initial concentration of NaOH

NaOH is a strong base and the molar ratio of NaOH to OH⁻is 1:1. Thus, the initial concentration of NaOH is 1/1 × 0.02512 M = 0.02512 M.

Step 4: Calculate the moles of NaOH

We will use the definition of molarity.

M = moles of NaOH/liters of solution

moles of NaOH = M × liters of solution

moles of NaOH = 0.02512 mol/L × 0.5000 L = 0.01256 mol

Step 5: Calculate the mass of 0.01256 moles of NaOH

The molar mass of NaOH is 40.00 g/mol.

0.01256 mol × 40.00 g/mol = 0.5024 g

Answer:

0.2762M Na+ in the solution

Explanation:

2.07g of sodium iodide Is Dissolved In 50.ML Of A 0.30M...

To solve this question we need to find the moles of sodium iodide, NaI, that are the same than the moles of sodium cation, Na+. The volume in liters of the solution is 0.050L. The molarity is:

Moles NaI = Moles Na+ -Molar mass NaI: 149.89g/mol-

2.07g NaI * (1mol / 149.89g) = 0.01381 moles NaI = Moles Na+

Molarity:

0.01381 moles Na+ / 0.0500L =

0.2762M Na+ in the solution

Answer: The molarity of an HCl solution is 0.218 M if 43.6 mL of a 0.125 M NaOH solution are needed to titrate a 25.0 mL sample of the acid.

Explanation:

Given: [tex]V_{1}[/tex] = 43.6 mL,      [tex]M_{1}[/tex] = 0.125 M

[tex]V_{2}[/tex] = 25.0 mL,        [tex]M_{2}[/tex] = ?

Formula used to calculate the concentration of acid is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula.

[tex]M_{1}V_{1} = M_{2}V_{2}\\0.125 M \times 43.6 mL = M_{2} \times 25.0 mL\\M_{2} = 0.218 M[/tex]

Thus, we can conclude that the molarity of an HCl solution is 0.218 M if 43.6 mL of a 0.125 M NaOH solution are needed to titrate a 25.0 mL sample of the acid.

The molarity of the HCl solution used in the neutralization reaction has been 0.218 M.

The reaction of NaOH with HCl has been a neutralization reaction. The resultant will be salt and water.

In the reaction the molarity can be calculated as:

Molarity of HCl [tex]\rm[/tex][tex]\times[/tex] Volume of HCl = Molarity of NaOH

Given,

The volume of HCl solution = 25 ml

Molarity of NaOH = 0.125 M

Volume of NaOH solution = 43.6 ml

Substitute the values in the equation:

Molarity of HCl [tex]\times[/tex] 25 = 0.125 [tex]\times[/tex] 43.6

Molarity of HCl [tex]\times[/tex] 25 = 5.45

Molarity of HCl solution = [tex]\rm \dfrac{5.45}{25}[/tex]

Molarity of HCl solution = 0.218 M

The molarity of the HCl solution used in the neutralization reaction has been 0.218 M.

For more information about the molarity, refer to the link:

https://brainly.com/question/12127540

Answer:

BF3

Explanation:

The octet rule describes atoms' preference and affinity for having eight (8) electrons in their valence shell. Whenever an atom is encircled by eight(8) electrons, it forms a stable configuration. This octet can be composed of its' own electrons as well as some shared electrons. In the periodic table, only the s-block and p-block electrons are considered for the octet rule.

However, out of the given option, only BF3 does not comply with the octet rule: This is because the Bromine contains 2 lone pairs of electrons and 3 other shared bonded pairs of electrons with Flourine making a total of 10 electrons in the valence shell and which does not conform with the octet rule.

Answer:

[tex]{ \boxed{ \bf{vapour \: density = 2 \times molecular \: mass}}} \\{ \tt{ PV= (\frac{m}{ m_{r}}) RT}} \\ { \tt{3 \times 5.6 = \frac{11}{m _{r}} \times 0.0831 \times 273}} \\ { \tt{m _{r} = 14.85 \: g}} \\ \\ { \bf{vapour \: density = 2 \times m _{r}}} \\ = 2 \times 14.85 \\ = 29.7 \: { \tt{g {dm}^{ - 3} }}[/tex]

Answer:

To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN

Explanation:

Dilution is the reduction of the concentration of a chemical in a solution and consists simply of adding more solvent.

In a dilution the amount of solute does not vary. But as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

In a solution it is fulfilled:

Ci* Vi = Cf* Vf

where:

In this case:

Replacing:

1.40 M* 20 mL= 0.088 M* Vf

Solving:

[tex]Vf=\frac{1.40 M* 20 mL}{0.088 M}[/tex]

Vf= 318.18 mL

To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN

Answer:

n = 3, l = 2, ml =-2

Explanation:

Quantum numbers are a set of values which can be used to describe the energy and position of an electron in space.

There are four sets of quantum numbers;

1) principal quantum number

2) orbital quantum number

3) spin quantum number

4) magnetic quantum number.

The values of orbital quantum number include; -l to +l;

The set of quantum numbers without error is ; n = 3, l = 2, ml =-2

Answer:

19.7 g.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to realize this problem can be solved by using a molecules-moles-mass relationship, starting with the given molecules, using the Avogadro's number and the molar mass of nitric acid (63.01 g/mol):

[tex]18.8x10^{22}molec*\frac{1mol}{6.022x10^{23}molec}* \frac{63.01g}{1mol} \\\\=19.7g[/tex]

Regards!

Answer:

[Na⁺] = 1.99 M

Explanation:

Na₂S is a ionic salt that can be dissociated.

Dissociation equation is:

Na₂S  →  2Na⁺  +  S⁻²

1 mol of sodium sulfide can give 2 moles of sodium cation.

We convert moles of salt: 78 g . 1mol / 78.06 g = 0.999 moles

As ratio is 1:2, after dissociation we have (0.999 . 2) = 1.998 moles of Na⁺

Molarity is a type of concentration.

It indicates moles of solute in 1 L of solution and in this case, we have 1 L as final voulme.

Moles of Na⁺ are 1.998 moles. Then molarity (mol/L) is:

M =1.99 mol/L  

Answer:

1.60 g of Fe₂O₃

Explanation:

We'll begin by calculating the number of mole water that reacted. This can be obtained as follow:

Volume (V) = 6.50 L

Temperature (T) = 50.2 °C = 50.2 + 273 = 323.2 K

Pressure (P) = 0.121 atm

Gas constant (R) = 0.0821 atm.L/Kmol

Number of mole (n) =?

PV = nRT

0.121 × 6.5 = n × 0.0821 × 323.2

0.7865 = n × 26.53472

Divide both side by 26.53472

n = 0.7865 / 26.53472

n = 0.03 mole

Thus, 0.03 mole of water reacted.

Next, we shall determine the number of mole of Fe₂O₃ produced from the reaction. This can be obtained as follow:

2Fe + 3H₂O —> Fe₂O₃ + 3H₂

From the balanced equation above,

3 moles of H₂O reacted to produce 1 mole Fe₂O₃.

Therefore, 0.03 mole of H₂O will react to produce = (0.03 × 1)/3 = 0.01 mole of Fe₂O₃.

Thus, 0.01 mole of Fe₂O₃ was produced from the reaction.

Finally, we shall determine the mass of 0.01 mole of Fe₂O₃. This can be obtained as follow:

Mole of Fe₂O₃ = 0.01 mole

Molar mass of Fe₂O₃ = (56×2) + (16×3)

= 112 + 48

= 160 g/mol

Mass of Fe₂O₃ =?

Mass = mole × molar mass

Mass of Fe₂O₃ = 0.01 × 160

Mass of Fe₂O₃ = 1.60 g

Therefore, 1.60 g of Fe₂O₃ were produced.

Answer:

0.465

Explanation:

To find the volume of a substance, divide the mass by the density.

M/D = V

10.0 / 21.5 = 0.4651163

Then round to 3 significant figures: and the density is 0.465

Answer:

Classify each of the following as either macroscopic, microscopic or particulate:

a. a red blood cell.

b. a sugar molecule.

c. baking powder.

Explanation:

a. A red blood cell is a microscopic particle.

It can be viewed under a microscope.

b. A sugar molecule is also a microscopic substance.

It can be viewed under a microscope.

c. Baking powder is macroscopic substance.

Answer:

To transfer leftover solids to the filtration funnel and wash out crystals after recrystallization, ice cold methanol should be used (the mother liquor used for recrystallization).

Explanation:

Hope this helped

Answer:

CaCO₃(s) => CaO(s) + CO₂(g) ... GpIIA Decomp

Explanation:

Metallic Carbonates decompose into a metallic oxide and carbon dioxide.

Examples:

Na₂CO₃(s) => Na₂O(s) + CO₂(g) ... GpIA Decomp

MgCO₃(s) => MgO(s) + CO₂(g) ... GpIIA Decomp

Answer:

Fill in the blanks with each titration term with its definition.

a. Solution of an unknown concentration that has another solution slowly added to it ________________

b. Process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them ______________

c. A reagent added to the analyte solution that changes color when the reaction is complete ______________

d. Glassware that allows a solution to be precisely and slowly added to another solution _____________

e. Solution of known concentration that is slowly added to a solution of unknown concentration ________________

f. When the required amount of one solution has been added to the second solution to complete the reaction ____________

Explanation:

a. Solution of an unknown concentration that has another solution slowly added to it is called analyte.

b. Process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them is called titration.

c. A reagent added to the analyte solution that changes color when the reaction is complete is called an indicator.

d. Glassware that allows a solution to be precisely and slowly added to another solution is called a pipette.

e. Solution of known concentration that is slowly added to a solution of unknown concentration is called titrant.

f. When the required amount of one solution has been added to the second solution to complete the reaction is called neutralization.

Answer:

a. the proportion of elements to compounds is constant.

Answer:

2700 kg/m³

Explanation:

First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:

Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:

The answer is 2700 kg/m³.

Answer:

B.9.710-11M

Explanation:

Answer:

Explanation:

1mol of [tex]O_2=2*16{gr\over{mol}}=32{gr\over{mol}}\\\\15.7gr->15.7gr*{1\over{32{gr\over{mol}}}}=0.491mol~of~O_2[/tex]

as 1mol of molecular oxigen reacts with 4 mol of aluminium

1 mol of O2         -----------------------------> 4 mol of Al

0.491 mol of O2  ------------------------------>     x

[tex]x={0.491*4\over{1}}~mol~of~Al=1.9625~mol~of~Al[/tex]

Answer:

The hot water dissolves the flavor and color components.

Explanation:

Caffeine can be extracted from the tea leaves into hot water because the hot water dissolves the flavor and color components away from the solid vegetable. This is an example of a solid-liquid extraction. We can extracted the aqueous solution and isolated the crude caffeine by converting the components of caffeine into their calcium salts which are insoluble in water. Then the caffeine can be extracted from the water by using methylene chloride.

Answer:

2.9 × 10²⁴ atoms Cu; 3.3 × 10²¹ atoms C; 1.44 × 10²⁵ atoms Hg; 9.63 × 10²² atoms Na

Explanation:

To convert moles to atoms, we need a conversion factor: Avogadro's number. There are 6.02 × 10²³ atoms in 1 mole of atoms.

4.9 mol Cu × 6.02 × 10²³ atoms Cu/1 mol Cu = 2.9 × 10²⁴ atoms Cu

5.4 × 10⁻³ mol C × 6.02 × 10²³ atoms C/1 mol C = 3.3 × 10²¹ atoms C

24.0 mol Hg × 6.02 × 10²³ atoms Hg/1 mol Hg = 1.44 × 10²⁵ atoms Hg

0.160 mol Na × 6.02 × 10²³ atoms Na/1 mol Na = 9.63 × 10²² atoms Na

Answer:

a. minus 10

Explanation:

An element in group 13 = Boron ,valence electrons = 3 , therefore, valence electrons in group 13 = group no. -10

An element in group 18 = Neon, valence electrons = 8 , therefore, valence electrons in group 18 = group no. - 10

For groups 13 through 18, the number of valence electrons in an atom is equal to the group number minus 10. Therefore, option (A) is correct.

Valence electrons in an atom can be described as the electrons occupying the outer most electron shell of an atom while the electrons in the inner shell are core electrons. Lewis structures can be helpful to calculate the number of valence electrons.

Valence electrons can be filled in several electron shells as they are caused interaction between atoms and responsible for the formation of chemical bonds. Only valence electrons can contribute to the formation of a chemical bond and decide the reactivity of the element.

The general electronic configuration of group 13 is ns²np¹ has three valence electrons. It can be determined as group number - 10 = 13 - 10 = 3.

The general electronic configuration of group 18 is ns²np⁶ has eight valence electrons. It can be determined as group number - 10 = 18 - 10 = 8.

Learn more about valence electrons, here:

brainly.com/question/18612412

#SPJ2