The statement "If an array index goes out of bounds, the program always terminates in an error" is generally true. It depends on the programming language and the error handling mechanism. Arrays are stored in contiguous memory locations and accessed by their index values.
If an index in array goes out of bounds, the program may attempt to access memory that is not allocated to the array, leading to unexpected results or even a program crash. In most languages, accessing an array index out of bounds will result in an error, typically called an "IndexOutOfRangeException" or "ArrayIndexOutOfBoundsException." This error will cause the program to terminate, unless it is caught and handled properly using exception handling techniques specific to the programming language.
To avoid array index out-of-bounds errors, it is important to properly initialize arrays and ensure that all index values fall within the valid range. Additionally, many programming languages provide bounds checking mechanisms or other safety features that can help prevent these types of errors.
To learn more about array : https://brainly.com/question/28061186
#SPJ11
which of the following is an ad hoc network made up of up to eight bluetooth devices?
An ad hoc network made up of up to eight Bluetooth devices is called a piconet. In a piconet, one device acts as the master and up to seven other devices act as slaves. The master device initiates and controls the connection, while the slave devices receive commands and data from the master.
Piconets are typically used for short-range wireless communication between devices such as smartphones, laptops, and wireless headsets. The name "piconet" comes from the combination of "pico" (meaning small) and "network." This type of network is designed for small groups of devices that need to communicate with each other without the need for a centralized infrastructure. Bluetooth technology enables these devices to communicate wirelessly using low-power radio waves in the 2.4 GHz frequency range.
In summary, a piconet is an ad hoc network made up of up to eight Bluetooth devices, with one device acting as the master and up to seven devices acting as slaves. Piconets are designed for short-range wireless communication between devices without the need for a centralized infrastructure.
To know more about Piconet visit:
https://brainly.com/question/10479017
#SPJ11
after performing a search, you can use the ____ key to return to a previously found match:
After performing a search, you can use the "F3" key to return to a previously found match.
The "F3" key is a shortcut that allows users to quickly navigate to the next occurrence of a previously found search term. This feature is especially useful when working with long documents or when trying to find specific pieces of information within a large data set. By using the "F3" key, users can save time and avoid having to redo their search from scratch. Additionally, many software applications also offer the option to customize keyboard shortcuts, allowing users to set their own preferred keys for certain functions.
Learn more about software applications here:
https://brainly.com/question/4560046
#SPJ11
The ____ operator allows you to search for a range of values in one field. a) AND b) OR c) NOT d) BETWEEN
Ad) BETWEEN. The BETWEEN operator is used to search for a range of values in one field. It allows you to specify a range of values that a field must fall within.
For example, if you want to find all customers who have purchased products between $100 and $500, you can use the BETWEEN operator to specify this range.
The BETWEEN operator is typically used in combination with the SELECT statement in SQL. Here's an example query that uses the BETWEEN operator:
sql
Copy code
SELECT * FROM customers
WHERE purchase_amount BETWEEN 100 AND 500;
This query will return all records from the "customers" table where the "purchase_amount" field falls within the range of $100 to $500.
In addition to the BETWEEN operator, SQL also provides other comparison operators that allow you to search for values in a field, such as the greater than (>), less than (<), and equal to (=) operators.
Learn more about operator here:
https://brainly.com/question/29949119
#SPJ11
you can use powerpoint to trim video clips without having to use a separate video-editing program. true or false
PowerPoint offers basic video editing features, including the ability to trim video clips. Trimming a video clip means cutting away parts of it that are not necessary or unwanted. PowerPoint allows users to trim the beginning, middle, or end of a video clip.
To trim a video clip in PowerPoint, users need to select the clip on the slide and then click on the "Playback" tab. From there, they can choose the "Trim Video" option, which opens a new window that shows the video timeline. Users can then drag the handles on the timeline to select the portion of the video that they want to keep, and click "OK" to apply the changes.
It is important to note that PowerPoint's video editing capabilities are limited compared to dedicated video editing software. While trimming video clips is a basic feature, users cannot do more complex edits such as adding effects, transitions, or overlays. If users need to do more advanced video editing, they should use a dedicated video editing program instead.
To know more about PowerPoint visit:
https://brainly.com/question/31733564
#SPJ11
without adjusting the column widths, guarantee that all columns will print on one page. font size
To ensure that all columns of a table or spreadsheet will print on one page without adjusting the column widths, one solution is to adjust the font size. This can be done by decreasing the font size of the text in the cells. By decreasing the font size, more data can fit within a cell, allowing more columns to fit on a single page.
It's important to keep in mind that decreasing the font size too much can make the text difficult to read. Therefore, it's recommended to only decrease the font size by a few points. For example, if the font size is currently set at 12pt, decreasing it to 10pt or 9pt should be sufficient to fit all columns on one page. Another tip is to use a font that is easy to read at a smaller size. Fonts such as Arial, Calibri, and Times New Roman are good options for smaller font sizes. In addition to adjusting the font size, other formatting options can be considered to fit more data on a single page. These include adjusting margins, removing unnecessary columns or rows, and adjusting the orientation of the page (e.g. landscape instead of portrait). Overall, by adjusting the font size and considering other formatting options, it's possible to fit all columns on one page without adjusting the column widths.
Learn more about spreadsheet here-
https://brainly.com/question/10509036
#SPJ11
The instruction Myanswer = Mynumber*2 is an example of a(n) ____ operation.
a. processing
b. numerical
c. data
d. input
The instruction "Myanswer = Mynumber*2" is an example of a numerical operation.
Numerical operations involve mathematical calculations such as addition, subtraction, multiplication, and division. In this case, the instruction is multiplying the value of "Mynumber" by 2 and assigning the result to the variable "Myanswer". This is a common operation in programming and is often used to manipulate numerical data. Other types of operations include processing, which involves performing operations on data, input, which involves accepting data from a user, and data operations, which involve manipulating data in various ways. However, in this case, the instruction is specifically performing a mathematical calculation, making it a numerical operation.
To know more about numerical operation visit:
https://brainly.com/question/28311889
#SPJ11
ms-dos first used a(n) ________ interface.
MS-DOS, or Microsoft Disk Operating System, was first used in the early 1980s and was designed to be a command-line interface operating system. This means that the interface of MS-DOS was text-based, where users had to type in specific commands to execute tasks.
The initial versions of MS-DOS did not have any graphical user interface, or GUI, which is a more intuitive way of interacting with a computer using icons and images. Instead, MS-DOS relied on the use of keyboard commands to navigate the operating system and execute programs. MS-DOS was an important milestone in the history of personal computing, as it enabled early personal computers to become more accessible and usable. The command-line interface of MS-DOS allowed users to control the computer directly, giving them greater flexibility and control over their machines. However, it was also a somewhat intimidating and complex system to use, especially for those without prior computer experience.
Over time, MS-DOS evolved to include some graphical user interface elements, such as the use of menus and windows, but it was primarily a command-line interface operating system until the release of Windows 95 in 1995. Windows 95 marked a major shift in the way that users interacted with computers, as it introduced a much more user-friendly GUI that made it easier to navigate and use the operating system. Nevertheless, MS-DOS remains an important part of the history of computing, and its legacy can still be seen in many modern operating systems today.
Learn more about operating system here-
https://brainly.com/question/6689423
#SPJ11
which of the following applications is more likely to justify the investment in Category 6 cable? a) e-mail b) instant messaging c) printing d) streaming video
Streaming video is more likely to justify the investment in Category 6 cable.
Category 6 cable is designed to support higher bandwidths and faster data transfer rates than previous generations of twisted pair copper cable. It is capable of supporting data transfer rates of up to 10 Gigabits per second (Gbps) over distances of up to 55 meters, making it suitable for high-bandwidth applications such as streaming video. In contrast, applications such as e-mail, instant messaging, and printing typically do not require high bandwidths or fast data transfer rates, and can be adequately supported by lower-grade cable such as Category 5e (Cat5e) or even Category 5 (Cat5) in some cases. Overall, the choice of cable depends on the specific needs of the network and the applications that will be run on it. However, if the network will be used for high-bandwidth applications such as streaming video, then Category 6 cable may be a worthwhile investment.
Learn more about Category 6 cable here:
https://brainly.com/question/31767472
#SPJ11
contributions that originate with the poster are categorized as ________.
Contributions that originate with the poster are categorized as user-generated content.
User-generated content refers to any form of content, such as comments, posts, photos, videos, and more, that is created by users and posted on a website, forum, social media platform, or other digital channel. This type of content is often seen as more authentic and trustworthy than brand-generated content, as it comes from real people with personal experiences and perspectives. User-generated content can be an effective way to build engagement, foster community, and generate buzz around a brand or product.
User-generated content (UGC) has become increasingly popular in recent years, as more and more brands recognize its power to connect with consumers and drive engagement. UGC can take many different forms, from reviews and testimonials to social media posts and blog articles. Whatever form it takes, however, UGC is a valuable asset for brands looking to build their online presence and connect with their audience. One of the key benefits of UGC is that it is often seen as more authentic and trustworthy than other types of content. When users share their experiences and opinions about a product or service, they are providing valuable insights that can help other consumers make informed decisions. This can be particularly important in industries like travel, where people often rely on reviews and recommendations from others when planning their trips. Another advantage of UGC is that it can be a powerful tool for building engagement and fostering community. When users feel that their contributions are valued and appreciated, they are more likely to continue participating and sharing their thoughts and experiences. This can create a sense of loyalty and community around a brand or product, which can be incredibly valuable in the long run.
To know more about user-generated visit:
https://brainly.com/question/31354328
#SPJ11
In Agile Modeling, change is seen as the exception, not the norm.
False or true
False. In Agile Modeling, change is seen as the norm rather than the exception.
This is because Agile Modeling is an iterative and incremental approach to software development that emphasizes flexibility and adaptability. It recognizes that requirements and priorities can change frequently and that software development is an ongoing process of discovery and refinement.
Therefore, Agile Modeling encourages teams to be responsive to change, to embrace feedback, and to continuously improve their processes and practices. This helps teams to deliver software that meets the changing needs of their stakeholders in a timely and efficient manner.
Learn more about exception here:
https://brainly.com/question/31755607
#SPJ11
Which of the following is true about a company's InfoSec awareness Web site?a. It should contain large images to maintain interestb. Appearance doesn't matter if he information is therec. It should be placed on the Internet for public used. It should be tested with multiple browsers
The following statement is true about a company's InfoSec awareness website: "It should be tested with multiple browsers."
Testing a company's InfoSec awareness website with multiple browsers is important to ensure that the website is compatible with different web browsers and operating systems. This is especially important for companies that have employees using a variety of devices and browsers to access the website.
The other statements are false:
The website does not necessarily need to contain large images to maintain interest. The effectiveness of an InfoSec awareness website should be evaluated based on the quality and relevance of the information it provides, not the size of its images.
Appearance does matter, as it can affect the user's perception of the website and its credibility. The website should be visually appealing, easy to navigate, and provide a good user experience.
The website does not need to be placed on the Internet for public use. It can be placed on an internal network or company intranet for use by employees only.
Learn more about browsers here:
https://brainly.com/question/28504444
#SPJ11
as the length of a glass cable grows, the light signal attenuates due to reflection and ____.
As the length of a glass cable grows, the light signal attenuates due to reflection and absorption.
Absorption occurs when the light energy is converted to heat by the glass fibers. This process leads to a decrease in the intensity of the light signal over long distances. Reflection occurs when the light signal reflects off the sides of the glass fibers, causing some of the light energy to be lost and further contributing to the attenuation of the signal. To combat these effects, optical fibers are designed with special coatings that reduce the amount of absorption and reflection that occurs. Additionally, repeaters are used to regenerate the signal and boost the intensity of the light, enabling it to travel over longer distances with minimal attenuation.
To know more about absorption visit:
https://brainly.com/question/30697449
#SPJ11
which type of document would you use to provide information updates and interim reponses to the command group
In order to provide information updates and interim responses to the command group, one could use a status report. A status report is a type of document that provides a snapshot of the current status of a project or task, including progress, accomplishments, issues, and next steps. Status reports are typically prepared on a regular basis, such as weekly or monthly, and are used to keep stakeholders informed and to identify any problems or risks that need to be addressed.
A status report can be a very effective way to communicate with the command group, as it provides a concise and organized summary of the key information that they need to know. The report can be tailored to the specific needs of the audience, including highlighting key achievements or challenges, and can be accompanied by supporting documents or data as needed.
Overall, a status report can be a valuable tool for keeping the command group informed and engaged in the project or task, and can help ensure that everyone is on the same page and working towards the same goals.
To know more about this project completion click this link-
https://brainly.com/question/3221895
#SPJ11
The BRANCH, PUBLISHER, and ____ tables are part of the Henry Books Database.a.SALESc.AUTHORb.LOCATIONd.PARTANS
The BRANCH, PUBLISHER, and AUTHOR tables are part of the Henry Books Database, while LOCATION and PARTISANS are not included.
The Henry Books Database is a sample database used to teach database design and SQL. It consists of various tables, including BRANCH, PUBLISHER, and AUTHOR, which are used to store information related to the books, their publishers, and the authors. The BRANCH table contains data about the branches of the Henry Books store, including their branch IDs, names, and addresses. The PUBLISHER table stores information about the publishers of the books, such as their names and addresses. The AUTHOR table contains data about the authors of the books, including their names and birth dates. These tables are interconnected using primary and foreign keys to enable efficient data retrieval and manipulation.
Learn more about Henry Books Database here:
https://brainly.com/question/31416396
#SPJ11
which pcmcia standard uses the 32-bit pci bus standards and has a bumpy strip on the edge
The PCMCIA standard that uses the 32-bit PCI bus and has a bumpy strip on the edge is called CardBus.
CardBus is a PCMCIA standard that extends the 16-bit PC Card standard to support 32-bit PCI bus operations. It uses a 68-pin connector that includes a bumpy strip on the edge to prevent insertion into incompatible slots. The CardBus standard provides improved performance over the earlier PC Card standard, with a maximum bus speed of 33 MHz and support for DMA (Direct Memory Access) transfers. CardBus cards can also support multiple functions on a single card, such as Ethernet networking and sound capabilities. CardBus was widely used in laptop computers in the late 1990s and early 2000s, but has since been largely replaced by the ExpressCard standard.
Learn more aboout PCMCIA standard here:
https://brainly.com/question/31927636
#SPJ11
the ipv4 mapped address space within ipv6 always starts with _______ zeroes.
The IPv4 mapped address space within IPv6 always starts with 80 zeroes (0:0:0:0:0:0:0:0), followed by 16 ones, and then the 32-bit IPv4 address.
The IPv4 mapped address space is used to represent IPv4 addresses within an IPv6 network. This allows IPv6-only hosts to communicate with IPv4-only hosts without the need for protocol translation or dual-stack networks.
IPv4 addresses are represented in the IPv6 network as an 128-bit address with the first 80 bits set to 0 and the next 16 bits set to 1, followed by the 32-bit IPv4 address. For example, an IPv4 address of 192.168.0.1 would be represented in IPv6 as 0:0:0:0:0:0:192.168.0.1.
The IPv4 mapped address space is used by IPv6 transition mechanisms, such as Dual-Stack Lite and IPv6 over IPv4 tunneling, to facilitate communication between IPv4 and IPv6 networks.
To know more about IPv4 mapped address, visit:
brainly.com/question/28432421
#SPJ11
An IPv4 mapped address space within IPv6 starts with 80 zeroes, represented as ::ffff:0:0/96. It helps in the transition from IPv4 to IPv6.
Explanation:An IPv4 mapped address space within IPv6 always starts with 80 zeroes followed by 16 ones, and the remaining 32 bits are used for the IPv4 address. It's represented in this format: ::ffff:0:0/96. This mapping allows the IPv6 software to function as though it natively understands IPv4. Such an approach simplifies the transition from IPv4 to IPv6 by allowing IPv6 systems to embed IPv4 addresses within IPv6 format.
Learn more about IPv4 mapped address here:https://brainly.com/question/35504849
if either ____ or sharing is enabled, excel enables the other by default.
In Microsoft Excel, if either the "Track Changes" or "Sharing" feature is enabled, Excel will enable the other feature by default.
This means that when you turn on one feature, the other will be automatically enabled, as well. For example, if you enable Track Changes to keep track of changes made to a shared workbook, Excel will automatically enable the Sharing feature.
Similarly, if you enable Sharing to allow multiple users to edit a workbook simultaneously, Excel will automatically turn on Track Changes to keep track of the changes made by each user. This default behavior can be convenient, as it helps ensure that your workbook is set up in a way that best suits your needs. However, it's important to be aware of this behavior so that you can adjust your settings accordingly and avoid any unintended consequences.
Learn more about Excel here:
https://brainly.com/question/3441128
#SPJ11
when defining a variable, the keyword ____ appears at the beginning of the statement.
When defining a variable, the keyword `var` appears at the beginning of the statement.
In computer programming, a variable is a named storage location that holds a value or a reference to a value. Variables are used to store and manipulate data within a program. When a variable is defined, it must be assigned a data type that determines the kind of data it can store, such as integer, string, or boolean.
The keyword used to define a variable depends on the programming language. For example, in Java, the keyword used to define a variable is "int" for integers, "double" for floating-point numbers, and "String" for text strings. In Python, there is no need to declare the data type of a variable, as the data type is inferred from the value assigned to it. In JavaScript, the keyword used to define a variable is "var", "let", or "const" depending on the scope and mutability of the variable.
Variables are a fundamental concept in programming and are used extensively in algorithms, loops, conditional statements, and functions. The value of a variable can be changed during the execution of a program, allowing for dynamic behavior and flexibility. However, improper use of variables can lead to errors, such as uninitialized variables or variables with conflicting data types.
To know more about boolean,
https://brainly.com/question/13265286
#SPJ11
The multi-step process used when creating a new system is referred to as ____.
the Systems Development Life Cycle
data mining
E-R Modeling
SQL
The multi-step process used when creating a new system is referred to as the "Systems Development Life Cycle (SDLC)".
The SDLC is a structured approach to developing a new system, consisting of several phases. These phases include planning, analysis, design, implementation, and maintenance. The planning phase involves identifying the need for a new system and determining its feasibility. In the analysis phase, the requirements of the system are gathered, and the system is designed in the design phase. The implementation phase involves actually building the system and putting it into operation, and in the maintenance phase, the system is evaluated and updated as needed to keep it running smoothly. The SDLC provides a framework for developing systems that are efficient, effective, and meet the needs of the organization.
Learn more about Systems Development Life Cycle (SDLC) here:
https://brainly.com/question/3661666
#SPJ11
what is one of the tools you can use to verify connectivity to a specific port on windows os?
One of the tools you can use to verify connectivity to a specific port on Windows OS is the Telnet command. Telnet is a command-line tool that enables you to establish a connection to a remote device or server using the Telnet protocol.
To verify connectivity to a specific port, you can use the Telnet command followed by the IP address or hostname of the target device and the port number you want to check. If the connection is successful, you will receive a message indicating that the connection was established. If the connection fails, you will receive an error message indicating that the connection could not be established.
The Telnet command can be useful for troubleshooting network connectivity issues and identifying problems with specific ports. However, it is important to note that Telnet is an unencrypted protocol and should not be used to transmit sensitive information over the network. As an alternative, you may want to consider using a more secure protocol, such as SSH, to establish connections to remote devices and servers.
To know more about Telnet command visit:
https://brainly.com/question/30960712
#SPJ11
Which of the following authentication protocols is based on a challenge/response mechanism? a. NTLM b. Kerberos c. TLS/SLS d. File Replication Service.
The authentication protocol based on a challenge/response mechanism is NTLM.
NTLM stands for NT LAN Manager and is a suite of Microsoft security protocols used for authentication. It works by sending a challenge to the client, which responds with a hashed version of the challenge using the user's password as the key. The server then verifies the response and grants access if the response is correct. Kerberos, on the other hand, is a ticket-based authentication protocol that uses a trusted third party to verify identities. TLS/SSL is a cryptographic protocol that provides secure communication over the internet. File Replication Service is a Microsoft technology that replicates files between servers.
learn more about NTLM here:
https://brainly.com/question/29434194
#SPJ11
web-based software must be installed on a computer before it is run.
Actually, web-based software does not need to be installed on a computer in order to run. Instead, it is accessed through a web browser and the necessary content is loaded directly from the internet.
This makes web-based software a convenient and easily accessible option for users. However, it's important to note that the content loaded web-based software may require a stable internet connection in order to function properly.
Web-based software, also referred to as "content loaded web-based" software, does not need to be installed on a computer before it is run. Instead, it operates through a web browser, allowing users to access and use the software without any installation process. This is in contrast to traditional software, which must be installed on a computer's hard drive before being utilized. Web-based software offers greater convenience and accessibility, as users can access the application from any device with an internet connection.
To know more about web-based visit:-
https://brainly.com/question/27733218
#SPJ11
the most common file types supported by digital cameras are raw uncompressed (raw) data and
The most common file types supported by digital cameras are raw uncompressed (RAW) data and JPEG (Joint Photographic Experts Group) formats. RAW files contain the unprocessed sensor data, while JPEG files are compressed and processed for better storage and compatibility.
Raw files are preferred by professional photographers as they contain all the information captured by the camera sensor and allow for more flexibility in editing. JPEG files are compressed and smaller in size, making them easier to share and use for everyday purposes. Some cameras also support TIFF and PNG file types. It is important to note that the file type can be set in the camera's settings and should be chosen based on the intended use of the photos.
RAW file format: RAW refers to an image file format that contains minimally processed data from a digital camera's image sensor. RAW files are considered to be the "digital negatives" of a photograph and contain more information than a JPEG or other compressed image format.
To learn more about RAW Here:
https://brainly.com/question/20066950
#SPJ11
in the 10gbase-lr standard, the l stands for ____.
In the 10GBASE-LR standard, the "L" stands for "Long".
10GBASE-LR is standard for 10 Gigabit Ethernet over optical fiber. The "LR" designation indicates that it is a long-range standard that can transmit data over distances of up to 10 kilometers (6.2 miles). The standard uses a single-mode fiber optic cable and operates at a wavelength of 1310 nanometers (nm). 10GBASE-LR is commonly used in metropolitan and wide-area networks where high-speed and long-distance transmission is required. Other related standards in this family include 10GBASE-SR (short-range) and 10GBASE-LX4 (long-wavelength, 4-channel).
Learn more about 10GBASE-LR here:
https://brainly.com/question/31115242
#SPJ11
many programs today use ______ on a webpage as their front end.
Many programs today use HTML as their front end on a webpage. HTML stands for Hypertext Markup Language and is a code used to create web pages. It provides the structure and content of a website, including headings, paragraphs, images, links, and more.
HTML is a popular choice for front-end development because it is widely supported by all web browsers and platforms. It is also relatively easy to learn, making it accessible to both experienced developers and beginners alike. In addition to HTML, other front-end technologies are often used in conjunction with it to enhance the user experience. CSS (Cascading Style Sheets) is used to control the layout and visual presentation of web pages, while JavaScript is used to add interactivity and dynamic functionality. Together, these technologies provide the foundation for modern web applications and allow developers to create dynamic, responsive, and visually appealing interfaces. As web development continues to evolve, HTML and its associated technologies will likely remain a vital part of the front-end development landscape.
Learn more about HTML here-
https://brainly.com/question/17959015
#SPJ11
what must be done before a windows dhcp server with a scope defined can begin providing services
Before a Windows DHCP server with a defined scope can begin providing services, two key steps need to be taken: configuring the scope options and activating the scope.
Firstly, the scope options must be configured. This involves specifying essential parameters such as the range of IP addresses that will be leased to clients, the subnet mask, default gateway, DNS server addresses, and any other necessary DHCP options. Once the scope options are properly configured, the scope needs to be activated. Activation makes the DHCP server start listening for DHCP requests on the network and allows it to begin assigning IP addresses to clients based on the defined scope settings. By completing these two steps—configuring the scope options and activating the scope—a Windows DHCP server is ready to provide DHCP services to clients on the network, dynamically assigning IP addresses and relevant network configuration information.
learn more about DHCP server here:
https://brainly.com/question/31196329
#SPJ11
when a url contains a "?" followed by a key value pair, what is this called?
The "?" symbol followed by a key-value pair in a URL is known as a query string. It is used to pass information from the client-side to the server-side via HTTP GET requests. The query string consists of a series of key-value pairs separated by an ampersand (&) symbol.
Each key-value pair is separated by an equals (=) sign. The key represents the name of the parameter being passed, and the value represents the value of that parameter.
For example, consider the following URL: https://www.example.com/search?q=apple&category=fruits. In this URL, the "?" indicates the beginning of the query string, and the first key-value pair is "q=apple", where "q" is the key and "apple" is the value. The second key-value pair is "category=fruits", where "category" is the key and "fruits" is the value.
Query strings can be used to pass information such as search terms, filter criteria, user IDs, or session IDs to the server. The server-side code can then use this information to generate appropriate responses or perform specific actions.
To know more about URL ,
https://brainly.com/question/10065424
#SPJ11
What file type is least likely to be impacted by a file infector virus?
A. .exe
B. .docx
C. .com
D. .dll
.dll file type is least likely to be impacted by a file infector virus.
A file infector virus is a type of malware that infects executable files and spreads by modifying or replacing them with infected versions. It primarily targets executable files with extensions like .exe, .com, and some script files. These viruses can modify the code of the infected files, leading to the spread of the virus to other systems or causing damage to the infected files. While .exe, .com, and .docx files are commonly targeted by file infector viruses, .dll (Dynamic Link Library) files are less likely to be impacted. DLL files contain reusable code and data that multiple programs can use simultaneously. They are typically not executed directly by users and are loaded and utilized by other executable files. Due to their nature and usage, DLL files are less susceptible to direct infection by file infector viruses.
Learn more about file infector viruses here:
https://brainly.com/question/29386218
#SPJ11
a maintenance model such as iso 17799 deals with methods to manage and operate systems.true/false
False. ISO 17799 (now ISO/IEC 27001) is a standard for information security management systems, which includes controls and guidelines for implementing, maintaining, and improving information security.
While it may involve some operational aspects, it primarily deals with the management of security systems and the protection of sensitive information. ISO 17799/27001 provides a framework for organizations to identify, assess, and manage information security risks. It includes a set of controls and guidelines that can be customized to an organization's specific needs and requirements. These controls cover various aspects of information security, such as access control, cryptography, incident management, and business continuity. The standard also provides a structured approach to managing security, including risk assessment, security policies, procedures, and training.
learn more about security here:
https://brainly.com/question/14545949
#SPJ11
T/F: pressing the esc key at the prompt while using the more command displays a help screen
False. Pressing the "Esc" key while using the "more" command does not display a help screen. In fact, the "Esc" key does not have any specific function in the "more" command. Instead, pressing the "h" key displays a help screen that lists the available commands and their functions.
The help screen provides information on how to navigate and use the "more" command, including scrolling through text, searching for specific strings, and jumping to a specific line number. It also lists other available commands, such as "q" to quit the "more" command and return to the command prompt, or "b" to scroll back one page. By using these commands, you can efficiently read and navigate through large text files in the terminal
Learn more about display here:
https://brainly.com/question/31756872
#SPJ11
