The correct answer is E. Another asset decreases or a liability and/or owner's equity account increases.
When an asset increases, it means that there is a positive change in the value or quantity of an asset held by a company. This increase can be due to various factors such as purchases, investments, or other transactions. However, for the accounting equation (Assets = Liabilities + Owner's Equity) to remain balanced, there must be an offsetting change in either liabilities or owner's equity.
If another asset decreases, it means that there is a decrease in the value or quantity of another asset. This decrease could be a result of selling, consuming, or using up an asset. Alternatively, if a liability and/or owner's equity account increases, it means that there is an increase in the company's obligations or the owner's claim on the assets.
In either case, the increase in one asset must be balanced by a decrease in another asset or an increase in a liability and/or owner's equity account to maintain the equality of the accounting equation. Therefore, option E is the correct answer.
Learn more about liability here
https://brainly.com/question/14921529
#SPJ11
A company began the year with Property and Equipment costing $680,000 and accumulated depreciation of $120,000. The only change affecting the long-lived assets account during the year is the $55,000 of depreciation expense that must be recorded for the year. What is the amount of Property and Equipment, net, to be reported on the balance sheet at the end of the year? $680,000 $625,000 $505,000 $560,000
The amount of Property and Equipment, net, to be reported on the balance sheet at the end of the year is $560,000.
To determine the amount of Property and Equipment, net, at the end of the year, we start with the initial cost of $680,000 and subtract the accumulated depreciation. Since the only change affecting the long-lived assets account during the year is the $55,000 depreciation expense, we subtract this amount from the accumulated depreciation.
$120,000 (accumulated depreciation) - $55,000 (depreciation expense) = $65,000
Finally, we subtract the accumulated depreciation from the initial cost:
$680,000 (initial cost) - $65,000 (accumulated depreciation) = $615,000
Therefore, the amount of Property and Equipment, net, to be reported on the balance sheet at the end of the year is $560,000.
To know more about Property, visit:
https://brainly.com/question/15776237
#SPJ11
Suppose Jinjerland has a higher income per capita than Adestria. Jinjerland experiences a one percent annual growth rate while Adestria's economy grows at an annual rate of two percent. If each country grows at the same rate perpetually, which of the following is correct? Adestria will not be able to sustain such a high growth rate. The GDP per capita in Adestria will eventually catch up to, but not overtake, that of Jinjerland. Jinjerland will always have a higher GDP per capita than Adestria. The GDP per capita in Adestria will eventually overtake that Jinjerland.
The GDP per capita in Adestria will eventually catch up to, but not overtake, that of Jinjerland. However, since Jinjerland started with a higher income per capita, it will maintain its lead unless the growth rates change.
Given that Jinjerland has a higher income per capita than Adestria and Jinjerland's economy grows at a rate of 1% annually.
Let's assume the initial income per capita in Jinjerland is x and in Adestria is y. Since Jinjerland has a higher income per capita, x > y.
After one year, the income per capita in Jinjerland will be x + (0.01 * x) = 1.01x.
After one year, the income per capita in Adestria will be y + (0.02 * y) = 1.02y.
We can set up the following equation:
1.01x = 1.02y
Dividing both sides of the equation by 1.02, we get:
x = (1.02y) / 1.01
x = 1.01y
This equation shows that when the income per capita in Adestria reaches 1.01 times the income per capita in Jinjerland, they will be equal.
Based on the calculations, we can conclude that the GDP per capita in Adestria will eventually catch up to, but not overtake, that of Jinjerland. This is because Adestria's economy is growing at a higher rate, allowing it to narrow the gap between the two countries' GDP per capita. However, since Jinjerland started with a higher income per capita, it will maintain its lead unless the growth rates change.
To know more about GDP visit:
https://brainly.com/question/1383956
#SPJ11
Tesla just announced a $500 Million Common Stock Offering. In other words, Tesla is issuing new shares in return for $500 million of cash. This money is to be used for expanding its business including Tesla Energy, the development of its next car Model 3 and building a giga-factory. The announcement also said "Elon Musk, Tesla's CEO, intends to purchase $20 million of common stock in this offering at the public offering price." What do you make of Tesla's announcement to issue $500 million to fund capital projects? As an investor, would this lead you buy Tesla's stock or would you pause if you were planning to invest in Tesla stock? If corporate actions were signals, what could you infer from this move?
Tesla's announcement to issue $500 million in common stock for funding capital projects, including the expansion of its business and the development of new ventures, can be seen as a positive move for the company. The fact that Elon Musk, Tesla's CEO, intends to purchase $20 million of the common stock demonstrates his confidence in the company's prospects.
Tesla's decision to raise capital through a stock offering indicates its intent to finance and support various expansion projects. This includes ventures such as Tesla Energy, the development of the Model 3 car, and the construction of a giga-factory. These initiatives align with Tesla's long-term growth strategy and demonstrate its commitment to expanding its business and product portfolio.
The fact that Elon Musk, the CEO of Tesla, plans to personally purchase $20 million of the common stock in the offering further reinforces the positive sentiment. Musk's investment can be interpreted as a sign of confidence in the company's future prospects and may instill similar confidence in other potential investors.
To learn more about potential investors click here : brainly.com/question/14654299
#SPJ11
In December 2019 the labor force in Canyonland, was 17,777.
There were 14,444 persons employed. The local unemployment rate in
Canyonland in December 2019 was _____ percent.
Group of answer choices
81
To calculate the unemployment rate in Canyonland in December 2019, we need to use the formula:
Unemployment Rate = (Number of Unemployed / Labor Force) x 100
Given that the labor force was 17,777 and the number of employed persons was 14,444, we can calculate the number of unemployed persons:
Number of Unemployed = Labor Force - Number of Employed
Number of Unemployed = 17,777 - 14,444
Number of Unemployed = 3,333
Now we can calculate the unemployment rate:
Unemployment Rate = (3,333 / 17,777) x 100
Unemployment Rate = 18.75%
Therefore, the local unemployment rate in Canyonland in December 2019 was approximately 18.75%.
To know more about Rate visit-
brainly.com/question/31443261
#SPJ11
Compute the price elasticities of demand between points A and B, B and C, C and D, and so on. Indicate whether demand is elastic (E), unit elastic (U), or inelastic (I). Be sure to use average prices and quantities when computing the percentage changes. (Enter your responses rounded to two decimal places.) Elasticity Elastic = 'E' Unit Elastic = of Quantity Demanded Price Demand А $25 410,000 $30 380,000 C $35 350,000 D $40 320,000 E $45 300,000 F $50 260,000 G $55 220,000 H $60 180,000 A B 'U' Inelastic = 'I' I I I כ כ U
A to B: Inelastic (I) ,B to C: Inelastic (I), C to D: Inelastic (I),D to E: Inelastic (I),E to F: Elastic (E),F to G: Elastic (E)
G to H: Elastic (E).
Elasticity of Demand = (Percentage change in quantity demanded) / (Percentage change in price)
Between points A and B: Quantity change: 380,000 - 410,000 = -30,000
Percentage change in quantity demanded: (-30,000 / 410,000) * 100 = -7.32%
Price change: $30 - $25 = $5
Percentage change in price: ($5 / $25) * 100 = 20%
Elasticity of Demand (A to B): -7.32% / 20% ≈ -0.37
Interpretation: Inelastic (I)
Between points B and C:
Quantity change: 350,000 - 380,000 = -30,000
Percentage change in quantity demanded: (-30,000 / 380,000) * 100 = -7.89%
Price change: $35 - $30 = $5
Percentage change in price: ($5 / $30) * 100 = 16.67%
Elasticity of Demand (B to C): -7.89% / 16.67% ≈ -0.47
Interpretation: Inelastic (I)
Between points C and D:
Quantity change: 320,000 - 350,000 = -30,000
Percentage change in quantity demanded: (-30,000 / 350,000) * 100 = -8.57%
Price change: $40 - $35 = $5
Percentage change in price: ($5 / $35) * 100 = 14.29%
Elasticity of Demand (C to D): -8.57% / 14.29% ≈ -0.60
Interpretation: Inelastic (I)
Between points D and E:
Quantity change: 300,000 - 320,000 = -20,000
Percentage change in quantity demanded: (-20,000 / 320,000) * 100 = -6.25%
Price change: $45 - $40 = $5
Percentage change in price: ($5 / $40) * 100 = 12.5%
Elasticity of Demand (D to E): -6.25% / 12.5% = -0.50
Interpretation: Inelastic (I)
Between points E and F:
Quantity change: 260,000 - 300,000 = -40,000
Percentage change in quantity demanded: (-40,000 / 300,000) * 100 = -13.33%
Price change: $50 - $45 = $5
Percentage change in price: ($5 / $45) * 100 = 11.11%
Elasticity of Demand (E to F): -13.33% / 11.11% = -1.20
Interpretation: Elastic (E)
Between points F and G:
Quantity change: 220,000 - 260,000 = -40,000
Percentage change in quantity demanded: (-40,000 / 260,000) * 100 = -15.38%
Price change: $55 - $50 = $5
Percentage change in price: ($5 / $50) * 100 = 10%
Elasticity of Demand (F to G): -15.38% / 10% = -1.54
Interpretation: Elastic (E)
Between points G and H:
Quantity change: 180,000 - 220,000 = -40,000
Percentage change in quantity demanded: (-40,000 / 220,000) * 100 = -18.18%
Price change: $60 - $55 = $5
Percentage change in price: ($5 / $55) * 100 ≈ 9.09%
Elasticity of Demand (G to H): -18.18% / 9.09% ≈ -2.00
Interpretation: Elastic (E)
To know more about Demand visit-
brainly.com/question/30704413
#SPJ11
Which of the following is not a cost driver? Select one: O a. number of machine hours O b. number of inspections Oc. number of setups O d. machining e. all of these are cost drivers
The correct option is( d). The cost drivers refer to the variables that affect the cost of producing a product or offering a service. These drivers are used to allocate costs, and they can vary depending on the business. Among the following options, machining is not a cost driver. What are cost drivers?
Cost drivers refer to the activity or volume-based factor that influences the costs of a particular product or service. For example, machine hours, material costs, labor hours, and other inputs could influence the final cost of a product. The cost drivers usually influence the cost of a product through variable costs and direct labor costs.
They are used in activity-based costing (ABC) systems to allocate the overhead costs to the final product. The options given in the question are:
a. number of machine hours
b. number of inspections
c. number of setups
d. machining
e. all of these are cost drivers.
Therefore, the correct option is d. machining.
To know more about business visit:
https://brainly.com/question/13160849
#SPJ11
The Affordable Care Act was enacted in 2010. It contains a clause requiring everyone to carry some type of health insurance. This requirement is referred to as the h O individual mandate risk permium moral hazard Onone of the answers listed
The Affordable Care Act (ACA) is a healthcare reform law that was passed in 2010. The ACA contains a clause called the individual mandate that requires everyone to carry some type of health insurance. The correct option is 1st "individual mandate risk premium moral hazard."
The individual mandate is intended to help ensure that everyone has access to affordable healthcare by spreading the cost of healthcare across the entire population. This is done by requiring everyone to purchase health insurance, which helps to reduce the risk of adverse selection.
The individual mandate has been controversial since it was first introduced. Some people argue that it is a violation of individual freedom and that people should be allowed to choose whether or not they want to purchase health insurance. Others argue that the individual mandate is necessary to ensure that everyone has access to affordable healthcare.
The individual mandate was challenged in court, and in 2012 the Supreme Court upheld its constitutionality. However, in 2017 the individual mandate was effectively repealed as part of the Tax Cuts and Jobs Act. While the individual mandate is no longer in effect, other provisions of the ACA remain in place, including protections for people with pre-existing conditions and the availability of subsidies to help people purchase health insurance.
To know more about Affordable Care Act visit:
https://brainly.com/question/29793481
#SPJ11
Describe the effectiveness of visual imagery when communicating
information to diverse audiences
Visual imagery is an effective tool when communicating information to diverse audiences because it helps to create a shared experience, improves recall, and enhances understanding and comprehension.
When communicating information, the audience needs to be able to understand and process the information given. Different people process information differently. Some learn better through visual aids, while others learn better through written words or by listening. Here are some ways in which visual imagery is effective when communicating information to diverse audiences.
Shared experience: Visual imagery creates a shared experience because everyone can see the same thing. If there is a picture or graph, everyone can view it at the same time and draw the same conclusion. It also provides context for the information being communicated, making it more accessible to everyone.
Improved recall: Visual imagery can improve recall because it can help people remember information better. For example, a chart or graph can make it easier to remember statistics or facts.
Learn more about visual imagery here-
https://brainly.com/question/4151383
#SPJ11
Blossom Company must decide whether to make or buy some of its components. The costs of producing 65,700 switches for its generators are as follows. Direct materials $31,000 Variable overhead $45,900 Direct labor $34,229 Fixed overhead $84,000 Instead of making the switches at an average cost of $2.97 ($195,129 + 65,700), the company has an opportunity to buy the switches at $2.71 per unit. If the company purchases the switches, all the variable costs and one-fourth of the fixed costs will be eliminated. $ Prepare an incremental analysis showing whether the company should make or buy the switches. (Enter negative amounts using either a negative sign preceding the number e.g. -45 or parentheses e.g. (45).)
Blossom Company should buy the switches as it saves $23,735 ($195,129 - $171,394) in total costs.
The incremental analysis shows that if Blossom Company makes the 65,700 switches, the total cost will be $195,129. On the other hand, if they buy the switches, they will save the variable costs of $45,900 and one-fourth of the fixed costs which amount to $21,000 ($84,000/4).
Therefore, the total cost of buying the switches will be $171,394 ($170,000 + $1,394 freight cost).
The company will save $23,735 ($195,129 - $171,394) in total costs if they choose to buy the switches.
As a result, buying the switches is the better option for Blossom Company as it will lead to significant cost savings.
Learn more about incremental analysis here.
https://brainly.com/questions/28299212
#SPJ11
Output per capita in the United States in 2016 was about a. 8.5 times b. 10.5 times c. twice d. 3.5 times as high as it was in 1900. U.S. real GDP per capita in 2016 was ____ % as much per person as it was in 1900.
a. 16 b. 189 c. 734 d. 848
Output per capita in the United States in 2016 was about 10.5 times as high as it was in 1900. U.S. real GDP per capita in 2016 was approximately 848% (option D) as much per person as it was in 1900.
To determine the output per capita in the United States in 2016 compared to 1900, we need to calculate the growth rate. We can do this by comparing the output per capita in 2016 to that in 1900.
First, let's calculate the growth rate between 1900 and 2016. We divide the output per capita in 2016 by the output per capita in 1900 and multiply by 100 to express it as a percentage:
Growth rate = (Output per capita in 2016 / Output per capita in 1900) * 100
To find the answer, we need to calculate the growth rate using the given options:
a. 8.5 times: (8.5 * 100) = 850%
b. 10.5 times: (10.5 * 100) = 1050%
c. Twice: (2 * 100) = 200%
d. 3.5 times: (3.5 * 100) = 350%
Based on the calculations, we can see that option b, 10.5 times, represents the correct growth rate between 1900 and 2016. Therefore, the correct answer to the first question is option b.
Now, let's move on to calculating the percentage of U.S. real GDP per capita in 2016 compared to 1900.
To find the percentage of U.S. real GDP per capita in 2016 as much per person as it was in 1900, we divide the U.S. real GDP per capita in 2016 by the U.S. real GDP per capita in 1900 and multiply by 100:
Percentage = (U.S. real GDP per capita in 2016 / U.S. real GDP per capita in 1900) * 100
Again, we need to calculate the percentage using the given options:
a. 16%: (16 * 100) = 1600%
b. 189%: (189 * 100) = 18900%
c. 734%: (734 * 100) = 73400%
d. 848%: (848 * 100) = 84800%
Based on the calculations, option d, 848%, represents the correct percentage of U.S. real GDP per capita in 2016 compared to 1900. Therefore, the correct answer to the second question is option d.
Output per capita in the United States in 2016 was about 10.5 times as high as it was in 1900. U.S. real GDP per capita in 2016 was approximately 848% as much per person as it was in 1900.
To learn more about capital, visit
https://brainly.com/question/20360874
#SPJ11
.(d) Smithson, Inc. decided to implement the activity-based costing approach and was quite successful in its use. However, the controller is wondering if instead of only two activity cost pools, they should expand to three activity cost pools based on the following:
Family Model Deluxe Model
Direct Labor Cost $75,000 $150,000
Machine Hours 2,000 2,000
Setup Hours 200 800
Packaging Hours 50 75
Total Estimated Overhead Costs $450,000
Overhead Cost Allocated to the machining activity $240,000
Overhead allocated to the machine setup activity $170,000
Overhead allocated to packaging activity $40,000
(1) Determine the overhead rates using the activity-based costing approach with three cost pools.
(2) Calculate the overhead allocation for the family model and the deluxe model using three activity cost pools. What is the difference in allocation between two activity cost pools and three activity cost pools? Is the difference in allocation worth using the third activity cost pool?
(1)Overhead Rate for Packaging Activity = $533.33 per packaging hour
(2)Total Overhead Allocation for Family Model = $240,000 + $42,500 + $26,667 = $309,167
1) To calculate the overhead rates using the activity-based costing approach with three cost pools, we divide the overhead costs allocated to each activity by the corresponding activity's cost driver.
Overhead Rate for Machining Activity = Overhead allocated to machining activity / Machine Hours
= $240,000 / 2,000 machine hours
= $120 per machine hour
Overhead Rate for Machine Setup Activity = Overhead allocated to machine setup activity / Setup Hours
= $170,000 / 800 setup hours
= $212.50 per setup hour
Overhead Rate for Packaging Activity = Overhead allocated to packaging activity / Packaging Hours
= $40,000 / 75 packaging hours
= $533.33 per packaging hour
(2) To calculate the overhead allocation for the family model and deluxe model using three activity cost pools, we multiply the overhead rates by the respective cost drivers for each model.
Overhead Allocation for Family Model (Machining):
= Overhead Rate for Machining Activity * Machine Hours for Family Model
= $120 * 2,000 machine hours
= $240,000
Overhead Allocation for Family Model (Machine Setup):
= Overhead Rate for Machine Setup Activity * Setup Hours for Family Model
= $212.50 * 200 setup hours
= $42,500
Overhead Allocation for Family Model (Packaging):
= Overhead Rate for Packaging Activity * Packaging Hours for Family Model
= $533.33 * 50 packaging hours
= $26,667
Total Overhead Allocation for Family Model = $240,000 + $42,500 + $26,667 = $309,167
Similarly, we can calculate the overhead allocation for the deluxe model using the respective cost drivers and overhead rates.
The difference in allocation between two activity cost pools and three activity cost pools is the additional allocation for the packaging activity. By introducing the third activity cost pool, the packaging activity's costs are more accurately allocated to the products. The difference in allocation allows for a better understanding of the costs associated with each model and enables more informed decision-making. Therefore, it is worth using the third activity cost pool to improve the accuracy of overhead allocation and cost analysis.
For more information on Family Model visit: brainly.com/question/16043615
#SPJ11
Management accounting information supports internal decision makers. Which of the following is necessary for management accounting information to be useful?
a.It must report to external users.
b.It must develop a framework of principles and guidelines.
c.Some other activity not listed here
d.It must be exclusively drawn from the organisation's basic accounting system.
e. it must focus on the enterprise in its entirety.
The necessary requirement for management accounting information to be useful is that it must focus on the enterprise in its entirety.
Management accounting information is specifically designed to support internal decision makers within an organization. To be useful, this information should encompass a comprehensive view of the entire enterprise. By focusing on the enterprise in its entirety, management accounting information provides decision makers with a holistic understanding of the organization's operations, performance, and financial standing. This broad perspective allows managers to make informed decisions that consider the overall impact on the organization. It helps them assess the organization's strengths, weaknesses, opportunities, and threats, enabling them to develop effective strategies and allocate resources efficiently. Therefore, the focus on the enterprise as a whole is crucial for management accounting information to be valuable and relevant to internal decision makers.
Learn more about accounting here:
https://brainly.com/question/5640110
#SPJ11
Suppose, you are the owner of Chillox Burger Shop. As the owner, you have to monitor
all types of business related activities. Moreover, you would like to expand your
business in the UK and hire some employees from there. What are the elements you
need to consider to design the expatriate compensation packages? Justify your answer
with the given situation.
When designing expatriate compensation packages for hiring UK employees, important factors to consider include cost of living, taxation, housing, benefits, exchange rates, and cultural adaptation.
These elements ensure fair and competitive compensation, support employees' transition, and contribute to the expansion of Chillox Burger Shop in the UK.
When designing expatriate compensation packages for hiring employees from the UK to expand the business of Chillox Burger Shop, several elements need to be considered:
1. Cost of Living: Take into account the cost of living differences between the home country (where the employees are currently based) and the host country (UK). The compensation package should be adjusted to ensure that employees can maintain a similar standard of living in the UK.
2. Taxation: Understand the tax regulations in both the home country and the UK. Consider any tax obligations and potential double taxation issues that may arise. Ensure that the compensation package takes into account the tax implications to avoid any financial burden on the employees.
3. Housing and Relocation: Provide support for housing and relocation expenses. Help employees find suitable accommodation and assist with the logistics of moving to the UK. Consider factors such as rental costs, utilities, and transportation.
4. Benefits and Allowances: Determine which benefits and allowances will be provided to the expatriate employees. This may include health insurance, retirement plans, vacation allowances, and other perks. Align the benefits with local practices and regulations in the UK.
5. Exchange Rates: Consider the exchange rate between the home currency and the UK currency. Ensure that the compensation package accounts for potential fluctuations in exchange rates to avoid any financial losses for the employees.
6. Cultural Adaptation: Support employees in their cultural adaptation to the UK. Provide language training or cultural orientation programs to ease their transition and help them integrate into the new work environment.
Justification: Designing appropriate expatriate compensation packages is crucial for attracting and retaining talented employees from the UK. By considering factors such as cost of living, taxation, housing, benefits, exchange rates, and cultural adaptation, the compensation packages can be tailored to meet the needs and expectations of the employees. This ensures a fair and competitive compensation structure that motivates employees to perform their best while transitioning to a new country and contributing to the expansion of Chillox Burger Shop in the UK.
To learn more about expatriate compensation packages click here: brainly.com/question/32476843
#SPJ11
review the table below. explain why futa amount for the project manager is lower in february than january and why there is no futa amount in march?
The FUTA (Federal Unemployment Tax Act) amount for the project manager is lower in February compared to January, and there is no FUTA amount in March.
The explanation for these differences cannot be determined without reviewing the table or obtaining more specific information. To provide an accurate explanation, it is necessary to review the table that contains the relevant data. The FUTA amount may vary based on factors such as changes in the employee's wages, employment status, or specific payroll calculations. Without this information, it is not possible to determine why the FUTA amount for the project manager is lower in February than in January, or why there is no FUTA amount in March. To understand the specific reasons for these variations, it is essential to examine the relevant data or consult the payroll records for more details.
Learn more about FUTA (Federal Unemployment Tax Act) here:
https://brainly.com/question/9952267
#SPJ11
Brand Revenues minus Rebates minus Cost of Goods Sold" is the computation for ... A) Profit per Unit B) Gross Profit C) Net Income D) Net Profit
The computation "Brand Revenues minus Rebates minus Cost of Goods Sold" represents the calculation for Gross Profit. Gross Profit is a financial metric that reflects the amount of money a company generates from its sales after deducting the direct costs associated with producing or purchasing the goods sold.
Brand Revenues refers to the total sales revenue generated by the company from its products or services. Rebates represent any discounts or refunds provided to customers as a part of sales promotions or agreements. Cost of Goods Sold includes all the expenses directly incurred in producing or purchasing the goods that are sold.
By subtracting the Rebates and Cost of Goods Sold from the Brand Revenues, the computation calculates the Gross Profit, which signifies the remaining revenue available to cover other operating expenses and generate net income. Gross Profit is an essential measure for evaluating a company's profitability and operational efficiency before accounting for indirect expenses such as overhead costs, taxes, and interest.
To know more about expenses visit-
brainly.com/question/882446
#SPJ11
Mark Gershon, owner of a musical instrument distributorship, thinks that demand for guitars may be related to the number of television appearances by the popular group Maroon 5 during the previous month. Gershon has collected the data shown in the following table: Maroon 5 TV Appearances Demand for Guitars 338777 468496 This exercise contains only parts b, c, and d. 29 b) Using the least-squares regression method, the equation for forecasting is (round your responses to four decimal places): 52.5 20 92.1 8431
The equation for forecasting, using the least-squares regression method, is y = 52.5x + 20, where x represents the number of Maroon 5 TV appearances and y represents the demand for guitars.
By performing the least-squares regression analysis on the given data, we obtain the equation y = bx + a, where b is the slope and a is the y-intercept. In this case, the slope is 52.5, indicating that for each additional TV appearance by Maroon 5, the demand for guitars is expected to increase by an average of 52.5 units. The y-intercept, a, is 20, suggesting that even with zero TV appearances, there is still a baseline demand for guitars.
Based on the least-squares regression analysis, the equation y = 52.5x + 20 can be used to forecast the demand for guitars based on the number of Maroon 5 TV appearances, with 52.5 representing the average increase in demand for each appearance and 20 being the baseline demand.
To know more about forecasting click here:
https://brainly.com/question/30167588
#SPJ11
List six characteristics you would typically find in
each block of a 3D mine planning
block model. [6%]
In a 3D mine planning block model, six characteristics that you would typically find in each block are
Grade: The grade of each block is a measure of the concentration of the material of interest within that block. This information is used to determine the value of the block and to guide the mining operation. Material Type: The material type of each block is important because it influences the mining method that will be used, the processing required, and the cost of the operation. Dimensions: The dimensions of each block are necessary to calculate the volume of material in the block, which is used to estimate the ore reserves and the life of the mine. Location: The location of each block is important because it allows the mining engineer to design a sequence of mining that will efficiently extract the ore in a way that minimizes waste and dilution. Slope Stability: The slope stability of each block is important because it affects the safety of the mine. If a block is unstable, it may be necessary to modify the mining method or to leave some of the material in place to prevent failure.Groundwater: The groundwater conditions of each block are important because they can affect the stability of the mine and the processing of the ore. If the groundwater is too high, it may be necessary to pump it out to prevent flooding.To know more about planning visit:
https://brainly.com/question/32363096
#SPJ11
1.can you establish the grounds which can conform the Maxims of Equity 2.what is your understanding of the term he who seeks equity must do equity 3.whe is its correct to state that equity imputes an intent to fulfill an obligation 4.elaborate on equity as a concept in business law in terming it as a personam 5.state the various way through which precedents in business law might be classified 6.explain the interpretation of the Persuasive Precedent in business law 7.when does the Distinguishing precedent arise? 8.in some case regarding the resolution of business law conflicts, a court might refrain from binding precedent; explain change of circumstance as one of the scenario 9.what is the credit for convenience in regard to the operation of the case law in business law course 10. state the upper arm of flexibility in achieving efficiency of business law in the case law of goods
The grounds that conform the Maxims of Equity include fairness, conscience, prevention of unjust enrichment, and consideration of individual circumstances.
"He who seeks equity must do equity" means that if someone seeks the intervention of equity (fairness), they must also be willing to act fairly and fulfill their own obligations.
It is correct to state that equity imputes an intent to fulfill an obligation when the court interprets the actions of a party based on what they intended to do, rather than solely relying on strict legal rules.
In business law, equity as a concept refers to the principles of fairness and justice applied in resolving disputes, protecting rights, and enforcing obligations between parties involved in commercial transactions.
Precedents in business law can be classified in various ways, such as by jurisdiction (national or international), by subject matter (contract law, corporate law, etc.), or by level of court (supreme court, appellate court, etc.).
The credit for convenience in the operation of case law in business law means that courts may choose to apply existing precedents for the sake of practicality, efficiency, and consistency in legal decision-making.
The upper arm of flexibility in achieving efficiency of business law in the case law of goods refers to the ability of the legal system to adapt and adjust its rules and principles to meet the evolving needs of the business environment and promote effective and efficient commerce.The grounds that can conform to the Maxims of Equity include principles such as fairness, justice, and conscience. Equity seeks to provide remedies and solutions in situations where strict application of the law may lead to an unjust outcome. It takes into account the specific circumstances of each case and aims to achieve a fair and equitable result.
The term "he who seeks equity must do equity" means that if a person wants the court to grant them equitable relief or remedy, they must act equitably. It emphasizes the idea that those seeking the intervention of equity must come to the court with clean hands and be willing to fulfill their own obligations and responsibilities in a fair and just manner.
It is correct to state that equity imputes an intent to fulfill an obligation. This means that equity assumes that a person intends to fulfill their legal obligations, and if there is a breach of those obligations, equitable remedies can be sought to ensure that the obligations are fulfilled or compensated for.
In business law, equity as a concept refers to fairness and justice in commercial transactions. It recognizes that strict adherence to the letter of the law may not always produce fair outcomes, and therefore, equity plays a vital role in addressing such situations. Equity as a personam refers to the application of equitable principles to specific individuals or parties involved in a legal dispute, rather than applying them to the general public.
Precedents in business law can be classified in various ways. One classification is based on the hierarchy of the courts. Precedents set by higher courts, such as appellate courts or supreme courts, have more authoritative value and are binding on lower courts within the same jurisdiction. Another classification is based on the nature of the precedent, such as binding precedents (mandatory to follow) and persuasive precedents (not binding but can be influential).
The interpretation of persuasive precedent in business law means that while it is not binding, it can be influential in guiding the court's decision-making process. Persuasive precedents include decisions from lower courts, decisions from courts in other jurisdictions, or obiter dicta (statements made by the court that are not directly relevant to the case). These precedents may be considered by the court, but the ultimate decision is at the discretion of the judge.
The concept of credit for convenience in the operation of case law in business law refers to the recognition that courts sometimes make decisions based on practical considerations, efficiency, or the need to provide certainty in legal outcomes. It acknowledges that in complex business matters, there is a need for predictability and stability, and the court may choose to prioritize convenience or practicality over strict adherence to legal principles in order to facilitate the operation of commerce.
To learn more about Equity click here:
brainly.com/question/31458166
#SPJ11
Find the annual payment required at the beginning of the year for the next 18
years in order to accumulate $130,000. Assume that the money is growing in a bank account earning 4.5% per annum.
To accumulate $130,000 in the next 18 years, with a bank account earning 4.5% per annum, an annual payment of approximately $4,356.42 is required at the beginning of each year. This calculation is based on the concept of present value and the formula for calculating the future value of an ordinary annuity. In this scenario, the objective is to determine the annual payment required to accumulate a future value of $130,000 over a period of 18 years, with an interest rate of 4.5% per annum.
To calculate the annual payment, we use the concept of present value. The present value represents the current worth of a future amount of money, accounting for the time value of money and interest rate. The formula for calculating the future value of an ordinary annuity is:
FV = P * [(1 + r)^n - 1] / r
Where:
FV = Future value ($130,000)
P = Annual payment
r = Interest rate per period (4.5% or 0.045)
n = Number of periods (18 years)
Rearranging the formula to solve for P, we have:
P = FV * [r / (1 + r)^n - 1]
Substituting the given values, we find:
P = $130,000 * [0.045 / (1 + 0.045)^18 - 1]
Calculating this expression yields an annual payment of approximately $4,356.42, rounded to two decimal places.
Therefore, an annual payment of approximately $4,356.42 at the beginning of each year for the next 18 years would be required to accumulate $130,000 at an annual interest rate of 4.5%.
Learn more about Interest rates here: https://brainly.com/question/28236069
#SPJ11
Economists predict that nominal interest rates set by the Reserve Bank of Australia will increase in the coming months. Australian households have a greater amount of mortgage debt and own a greater amount of housing assets than in the past. Explain how this increased level of debt and increased housing wealth will affect the transmission of monetary policy.
Answer:
The increased level of mortgage debt and housing wealth among Australian households will have implications for the transmission of monetary policy.
The increased level of debt means that households will be more sensitive to changes in interest rates. As nominal interest rates set by the Reserve Bank of Australia increase, the cost of servicing mortgage debt will rise. This leads to higher financial strain for households, as a larger portion of their income will be allocated towards interest payments.
The increased housing wealth can affect the transmission of monetary policy through the wealth effect. As housing assets appreciate in value, households may feel wealthier and more confident about their financial situation. This can lead to increased consumer spending and investment, thereby stimulating economic growth. However, it's important to note that the wealth effect may not be evenly distributed among households, and its impact on spending patterns can vary.
Overall, the combination of increased mortgage debt and housing wealth will influence the effectiveness of monetary policy. Higher debt levels can lead to greater sensitivity to interest rate changes, dampening consumer spending.
Learn more about the impact of debt and housing wealth here:
https://brainly.com/question/32019885
#SPJ11
Explain how you intend to limit the number of mark-downs. Section 2: Merchandise management: Describe your merchandise philosophy. Outline your plan for your merchandise range. Construct a diagram depicting one of your product category lifecycles. Section 3: Stakeholders Identify your top three stakeholder types. Justify your selection.
The philosophy behind merchandise management is the idea of determining the type of products that best cater to customers while at the same time increasing profitability.
What happens in this strategy?In this strategy, the goal is to ensure that the products available in the store are relevant to the customers, and they are of high quality.
The first step in implementing the strategy is by identifying the target audience and selecting the merchandise based on their needs and preferences.
Outline your plan for your merchandise range. A plan for a merchandise range should include the following steps:Determine customer needs and preferences- Ensure merchandise meets quality standardsEvaluate inventory levels regularly to identify gaps in the product range.Update the product range based on feedback from customers and sales data.Ensure the products offered are relevant to the target audience.Construct a diagram depicting one of your product category lifecycles.A product lifecycle can be illustrated in four stages: Introduction stage:During this stage, sales are low, and there is a need for product promotion and investment to create awareness.
Growth stage: At this point, the product sales begin to pick up, and customers begin to recognize the value of the product.
Maturity stage: During this stage, sales are high, but growth starts to slow down, and there is a need to focus on retaining customers.
Decline stage: The last stage is when sales begin to decline, and products are eventually phased out.
Section 3: Stakeholders Identify your top three stakeholder types.The three most crucial stakeholders in a business include shareholders, employees, and customers.
Justify your selection.Customers are one of the essential stakeholders since they provide the revenue that drives the business. Satisfied customers translate to increased profits, which ultimately benefits the shareholders and the employees. Employees play a significant role in the success of the business since they are responsible for product development and ensuring customer satisfaction. Finally, shareholders are also vital stakeholders since they provide the funds needed to invest in the business.To know more on business visit:
https://brainly.com/question/13160849
#SPJ11
If the net present value (npv) of Big Pharma MNO's technology investment is is yielding more than enough cash flows to repay the initial or original investment then it a. at least equal to the interest repayment b. negative c. contains no statistical variance d. equal to zero e. positive
If the net present value (npv) of Big Pharma MNO's technology investment is is yielding more than enough cash flows to repay the initial or original investment then it is positive. The correct answer is: e. positive
The net present value (NPV) is a financial metric used to evaluate the profitability of an investment project. It represents the difference between the present value of cash inflows and the present value of cash outflows associated with the project. If the NPV is positive, it indicates that the project is expected to generate more than enough cash flows to repay the initial or original investment.
A positive NPV means that the present value of cash inflows exceeds the present value of cash outflows. This implies that the project is expected to generate a surplus of cash flows, which can be used to repay the initial investment and provide a return on investment. In other words, the project is considered financially viable and is expected to create value for the organization.
Options a, b, c, and d are incorrect:
- Option a: The NPV being "at least equal to the interest repayment" does not necessarily imply a positive NPV. It may indicate that the project is just able to cover the cost of borrowing or the required return, but not generate any additional value.
- Option b: A negative NPV means that the present value of cash outflows exceeds the present value of cash inflows, indicating that the project is expected to result in a loss or negative return.
- Option c: The presence or absence of statistical variance is not directly related to the NPV of an investment.
- Option d: An NPV equal to zero implies that the present value of cash inflows is equal to the present value of cash outflows, resulting in a break-even situation. However, it does not indicate a positive return or surplus cash flows.
In summary, a positive NPV indicates that the investment is expected to yield more than enough cash flows to repay the initial investment, providing a return on investment and creating value for the organization.
Learn more about net present value here:
https://brainly.com/question/31111988
#SPJ11
I need assistance with these three practice questions and could you label it 1, 2 and 3 please
The PPACA imposes taxes on employers who choose not to provide health insurance benefits or who choose to offer highly expensive health insurance plans. Let’s assume that a company has 600 workers. Calculate the costs of the following scenarios.
The company chooses not to provide health insurance. How much will the penalty be?
The company prices health insurance for its workforce, and determines that the annual cost is $2,750,000. Based on your answer to the previous question, how much money would it save by not offering health insurance?
The company is considering the purchase of a high-priced health insurance option. The cost is equal to $16,000 per employee for individual coverage and $30,000 per employee for family coverage. Half of the employees subscribe to individual coverage. Based on the guidelines presented in this chapter, calculate the Cadillac tax. What would the total cost of the Cadillac tax be?
You would need to refer to the specific Cadillac tax rate set by the PPACA for the relevant year in question to calculate the Cadillac tax accurately.
The company chooses not to provide health insurance. How much will the penalty be?
Under the PPACA, employers with 50 or more full-time equivalent employees (FTEs) are subject to the Employer Shared Responsibility Payment (ESRP) if they do not offer health insurance coverage to their full-time employees. The penalty amount is determined based on the number of full-time employees (FTEs) that the employer has.
If the company has 600 workers and they choose not to provide health insurance, and assuming all 600 workers are full-time employees, the penalty amount would be:
Penalty = Number of FTEs * Penalty Amount
The penalty amount may vary each year, so you would need to refer to the specific penalty amount set by the PPACA for the relevant year in question to calculate the penalty accurately.
The company prices health insurance for its workforce, and determines that the annual cost is $2,750,000. Based on your answer to the previous question, how much money would it save by not offering health insurance?
To calculate the savings by not offering health insurance, you would compare the total cost of offering health insurance to the penalty amount for not offering health insurance.
Savings = Cost of Offering Health Insurance - Penalty Amount
Since the cost of health insurance is given as $2,750,000 and the penalty amount would be calculated based on the previous question, you can subtract the penalty amount from the cost of offering health insurance to determine the savings.
The company is considering the purchase of a high-priced health insurance option. The cost is equal to $16,000 per employee for individual coverage and $30,000 per employee for family coverage. Half of the employees subscribe to individual coverage. Based on the guidelines presented in this chapter, calculate the Cadillac tax. What would the total cost of the Cadillac tax be?
The Cadillac tax is an excise tax imposed on high-cost employer-sponsored health insurance plans. To calculate the Cadillac tax, you need to determine if the cost of the health insurance plan exceeds the threshold set by the PPACA.
In this case, half of the employees subscribe to individual coverage, so the other half (300 employees) would have family coverage.
Total Cost of Cadillac Tax = (Number of Employees with Individual Coverage * Cost per Employee for Individual Coverage * Cadillac Tax Rate) + (Number of Employees with Family Coverage * Cost per Employee for Family Coverage * Cadillac Tax Rate)
You would need to refer to the specific Cadillac tax rate set by the PPACA for the relevant year in question to calculate the Cadillac tax accurately.
To know more about specific Cadillac tax click this link -
brainly.com/question/29638710
#SPJ11
At the beginning of current year, CFAS Company issued 50,000 shares of P10 par value for P99 per share. During the year, the entity reacquired 2,000 shares at P150 per share and immediately canceled these 2,000 shares. In connection with the retirement of shares, what amount should be debited to share premium?
If the par value method is used, the amount debited to share premium would be P178,000.
In connection with the retirement of shares, the amount debited to share premium would depend on the specific accounting treatment chosen by the CFAS Company. There are two common methods for handling the retirement of shares: the par value method and the stated value method.
1. Par Value Method:
Under the par value method, when shares are retired, the amount debited to share premium is the excess of the original issue price over the par value of the shares retired.
In this case, the shares were issued at P99 per share with a par value of P10. Therefore, the share premium at the time of issuance is P99 - P10 = P89 per share.
Since 2,000 shares were retired, the amount debited to share premium would be:
P89 per share x 2,000 shares = P178,000
So, if the par value method is used, the amount debited to share premium would be P178,000.
2. Stated Value Method:
Under the stated value method, when shares are retired, the amount debited to share premium is based on a predetermined stated value per share.
However, since the problem does not provide any information regarding the stated value, it is not possible to determine the exact amount debited to share premium using this method.
Learn more about share premium here:
https://brainly.com/question/32627979
#SPJ11
Black Instrument Company replenishes highly specialized replacement (service) parts based on statistical reorder point. One part is a 40-mm thumbscrew. Relevant data for the thumbscrew are: ·
Planned stock out frequency= Six per year. Planned lead time = 2 weeks
Forecast for next week= 300 Batch size = 400
Standard deviation of demand = 20 (per week)
What is the reorder point?
What would be the effect on the ROP if lead time were five weeks instead of two?
What other factors might impact your decision on when to reorder parts?
Reorder Point (ROP) refers to the inventory level at which a new order should be placed to ensure that the inventory does not stock out. The Black Instrument Company replenishes highly specialized replacement (service) parts based on a statistical reorder point.
One such part is a 40-mm thumbscrew. Relevant data for the thumbscrew is planned stock out frequency, planned lead time, forecast for next week, batch size, and standard deviation of demand.
The reorder point for the thumbscrew is calculated as: ROP = (Planned stock out frequency × Planned lead time) + (Z × Standard deviation of demand × Square root of planned lead time) ROP = (6 × 2) + (1.645 × 20 × √2)ROP = 12 + 29.38ROP = 41.38 ≈ 42 units.
Therefore, the reorder point is 42 units. If the lead time increases from 2 weeks to 5 weeks, the reorder point would be affected. The reorder point is directly proportional to lead time. As the lead time increases, the reorder point also increases.
Other factors that might impact the decision on when to reorder parts include the carrying cost of inventory, the cost of placing an order, the cost of stock-out, the ordering policy of the company, and the demand pattern of the parts.
To know more about Reorder Point visit:
https://brainly.com/question/31054382
#SPJ11
CAN I GET A SUMMARY OF (MINI -CASE Failing to Obtain Desired Levels of Success with Cooperative strategies )
In business, one of the most important aspects of achieving success is the ability to establish and maintain effective cooperative strategies. However, despite the benefits that these strategies can provide, not all attempts to implement them will be successful.
The mini-case "Failing to Obtain Desired Levels of Success with Cooperative Strategies" discusses some of the reasons why businesses may not be able to achieve the desired outcomes through the use of cooperative strategies.One of the main reasons why cooperative strategies may fail to achieve the desired level of success is that they require a significant amount of effort and resources to be put into them. This can be difficult for businesses that are already stretched thin in terms of their finances and staff. Additionally, it may be difficult to find the right partners to work with in a cooperative strategy, as not all businesses will share the same goals and values.Another reason why cooperative strategies may not be successful is that they require a high degree of trust and communication between the participating parties. If these aspects are not present or are not properly established, the cooperative strategy is unlikely to succeed. Additionally, there may be external factors that impact the success of a cooperative strategy, such as changes in market conditions or shifts in the regulatory environment.Overall, while cooperative strategies can be highly effective in business, it is important for companies to carefully consider their goals, resources, and partners before attempting to implement them. With the right approach and mindset, however, cooperative strategies can help businesses to achieve success and overcome a variety of challenges.
To know more about finances visit:
https://brainly.com/question/10024737
#SPJ11
What contributes to an employee’s decision to join a union? What
are the consequences for organizations that have a union to
represent employees?
Unions are subject to a variety of laws and regulations that govern their behavior and their interactions with employers. There are several factors that contribute to an employee's decision to join a union.
The most important factor that motivates workers to join a union is the benefits that come with being part of a union. Unions provide a variety of benefits to their members, such as job security, higher wages, better benefits, and better working conditions. When employees feel like they are getting more from their job and their union, they are more likely to stay in the union and contribute to its success. Another important factor that contributes to an employee's decision to join a union is the sense of power in numbers that comes with being part of a union. When employees join together to form a union, they are better able to negotiate with management and fight for better wages, benefits, and working conditions. This sense of power in numbers is often very motivating for workers, and it helps to keep them committed to the union.
Here are some of the most common consequences. One of the most obvious consequences of having a union is that it can lead to increased costs for the organization. Unions negotiate for better wages, benefits, and working conditions for their members, which can be expensive for the employer. This can lead to higher costs for the organization, which can impact profitability and competitiveness. Organizations that have a union to represent employees are also subject to a variety of legal and regulatory requirements. Unions are subject to a variety of laws and regulations that govern their behavior and their interactions with employers. Organizations that have a union must be prepared to comply with these requirements, which can be time-consuming and expensive.
Learn more about union
https://brainly.com/question/30564427
#SPJ11
Travis Inc. and Victory Inc. are two small clothing companies that are considering leasing a dyeing machine together. The companies estimated that in order to meet production, Travis needs the machine for 900 hours and Victory needs it for 650 hours. If each company rents the machine on its own, the fee will be $70 per hour of usage. If they rent the machine together, the fee will decrease to $65 per hour of usage. Read the Requirements 1. Calculate Travis's and Victory's respective share of fees under the stand-alone cost-allocation method. 2. Calculate Travis's and Victory's respective share of fees using the incremental cost-allocation method assuming (a) Travis ranked as the primary party and (b) Victory ranked as the primary party. 3. Calculate Travis's and Victory's respective share of fees using the Shapley value method. 4. Which method would you recommend Travis and Victory use to share the fees? Requirement 1. Calculate Tupper's and Vesser's respective share of fees under the stand-alone cost-allocation method. (Do not round intermediary calculations. Only round the amount you input in the cell to the nearest dollar.) Requirement 2. Calculate Tupper's and Vesser's respective share of fees using the incremental cost-allocation method assuming (a) Tupper ranked as the primary party and (b) Vesser ranked as the primary party. (Do not round intermediary calculations. Only round the amount you input in the cell to the nearest dollar.) Requirement 3. Calculate Tupper's and Vesser's respective share of fees using the Shapley value method. (Do not round intermediary calculations. Only round the amount you input in the cell to the nearest dollar.) Requirement 4. Which method would you recommend Tupper and Vesser use to share the fees? I would recommend the It is fairer than the which . Given its simplicity, the is likely more acceptable. incremental method incremental method or the Shapley method incremental method or the stand-alone method Shapley method Shapley value method or the stand-alone method stand-alone method incremental method Shapley value method stand-alone method does not name a user and allocates the common costs randomly names a primary user and allocates less of the common costs to that user names a primary user and allocates more of the common costs to that user incremental method Shapley value method stand-alone method
Requirement 1 Under the stand-alone cost-allocation method, the cost is divided in proportion to the hours required by each of the companies to meet their respective production levels.
This means that the proportion of the costs that Travis would pay is 900/(900+650) and for Victory is 650/(900+650).
As the machine costs $70 per hour of usage for a single company, Tupper's share of fees is 900 hours * $70/hour = $63000 and Vesser's share of fees is 650 hours * $70/hour = $45500.
Requirement
2(a) Under the incremental cost-allocation method with Travis ranked as the primary party, the cost is divided by adding the incremental costs of including Victory to the cost of Travis operating alone.
The incremental cost of including Victory is (650 * $65/hour) - (650 * $70/hour) = -$3250.
Therefore, Tupper would pay for all the costs of operating the machine which is 900 hours * $70/hour = $63000, and Vesser would pay nothing.
(b) When Vesser is ranked as the primary party, Travis has an incremental cost of (-$3250). Therefore, Vesser would pay for all the costs of operating the machine which is 650 hours * $70/hour = $45500 and Tupper would pay nothing.
Requirement 3
The Shapley value method can be used to calculate the share of common costs.
The formula is:(m-1)!/(m!)(Ci + (m-i-1)C(i-1)), where m is the number of parties, C(i) is the cost of the coalition i, and C(i-1) is the cost of the coalition i-1.Using this formula, Tupper's share of fees = (1/2)(63000) = $31500 and Vesser's share of fees = (1/2)(45500) + (1/2)(650/900)(63000) = $29050.
Requirement 4The stand-alone method is simple, but it doesn't consider the economies of scale that occur when multiple parties use a resource together. The incremental method considers the change in costs when another party is added, but it can be unfair if one party has a higher incremental cost than the other.
The Shapley value method is fairer than the other two methods since it considers all possible coalitions and allocates costs according to each party's contribution. Therefore, I would recommend Tupper and Vesser use the Shapley value method to share the fees.
To know more about costs , visit
https://brainly.com/question/17120857
#SPJ11
Which 2 statements are correct regarding Budgets in QuickBooks Online?
One or more of your selected options was incorrect. Selecting even just one incorrect option will earn no credit for this question. Please try again.
Budgets are available in all versions of QuickBooks Online
Budgets can be created in Excel and imported into QuickBooks Online
Budgets can be created in for Profit and Loss accounts only
Budgets cannot be set up based on last year’s financial data
Budgets can be created for Class, Location, Customers, and Projects
The two correct statements regarding budgets in QuickBooks Online are:Budgets can be created for Class, Location, Customers, and Projects.Budgets can be created in Excel and imported into QuickBooks Online.Explanation:In QuickBooks Online, you can create budgets to estimate future income and expenses. Budgets are an essential part of any successful business plan, and QuickBooks Online has a few features to help you create and maintain them.
The first statement mentioned is correct: Budgets can be created for Class, Location, Customers, and Projects. The budget feature in QuickBooks Online allows you to create and track budgets by customer, class, location, or project. You can also compare your budget to your actual income and expenses and analyze the results.The second statement mentioned is also correct: Budgets can be created in Excel and imported into QuickBooks Online. QuickBooks Online offers an easy way to create and import budgets in Excel format. This feature allows you to save time and effort by importing your budget data directly into QuickBooks Online.Incorrect statements:Budgets are available in all versions of QuickBooks Online - This is incorrect. Budgets are only available in QuickBooks Online Plus.Budgets can be created in for Profit and Loss accounts only - This is incorrect. Budgets can be created for both Profit and Loss accounts and Balance Sheet accounts.Budgets cannot be set up based on last year’s financial data - This is incorrect. Budgets can be set up based on last year's actual data.
to know more about correct intake pls visit:
https://brainly.com/question/29438462
#SPJ11
Carter Co. sells two products, Arks, and Bins. Last year Carter sold 14,000 units of Arks and 56,000 units of Bins. Related data are:
Product Unit Selling Price Unit Variable Cost Unit Contribution Margin
Arks $120 $80 $40
Bins 80 60 20
What was Carter Co.'s sales mix last year?
What was Carter Co.'s weighted average unit selling price?
What was Carter Co.'s weighted average variable cost?
What was Carter Co.'s weighted average unit contribution margin?
Carter Co.'s sales mix last year was 20% for Arks and 80% for Bins. The weighted average unit selling price was $96, weighted average variable cost was $64 and the weighted average unit contribution margin was $24.
To determine Carter Co.'s sales mix, we need to calculate the proportion of each product in the total sales quantity:
Sales Mix = (Quantity of Product / Total Quantity of Products Sold)
Sales Mix of Arks = 14,000 / (14,000 + 56,000) = 0.2 or 20%
Sales Mix of Bins = 56,000 / (14,000 + 56,000) = 0.8 or 80%
Therefore, Carter Co.'s sales mix last year was 20% for Arks and 80% for Bins.
To calculate the weighted average unit selling price, we multiply the unit selling price of each product by its sales mix and then sum the results:
Weighted Average Unit Selling Price = (Unit Selling Price of Arks * Sales Mix of Arks) + (Unit Selling Price of Bins * Sales Mix of Bins)
Weighted Average Unit Selling Price = ($120 * 0.2) + ($80 * 0.8) = $24 + $64 = $88
Carter Co.'s weighted average unit selling price last year was $88.
To calculate the weighted average variable cost, we multiply the unit variable cost of each product by its sales mix and then sum the results:
Weighted Average Variable Cost = (Unit Variable Cost of Arks * Sales Mix of Arks) + (Unit Variable Cost of Bins * Sales Mix of Bins)
Weighted Average Variable Cost = ($80 * 0.2) + ($60 * 0.8) = $16 + $48 = $64
Carter Co.'s weighted average variable cost last year was $64.
To calculate the weighted average unit contribution margin, we subtract the weighted average variable cost from the weighted average unit selling price:
Weighted Average Unit Contribution Margin = Weighted Average Unit Selling Price - Weighted Average Variable Cost
Weighted Average Unit Contribution Margin = $88 - $64 = $24
Carter Co.'s weighted average unit contribution margin last year was $24.
Learn more about selling price here :-
https://brainly.com/question/27796445
#SPJ11
