If an equilibrium system contains gaseous reactants and/or products, a change in volume will cause a change in concentration and pressure. A decrease in volume will cause the system to shift in the direction that produces _____ moles of gas in total, whereas an increase in volume causes a shift in the direction that produces _____ moles of gas in total.

Answers

Answer 1

Answer:

Less

More

Explanation:

When a constraint is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.

When the volume of a reaction system in equilibrium is decreased, the equilibrium position will shift in the direction having less total number of moles.

Similarly, when the volume is increased, the equilibrium position shifts to the direction having a greater total number of moles.


Related Questions

explain about brownian movement in your own word ​

Answers

Answer:

Brownian moment means zig-Zag motion of particals Randomly anywhere in the free space or in fluids

why atoms of magnet differ from normal atoms?


Copied answers ❌❌❌​

Answers

Answer:

The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).

If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.

So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge

Question 1 of 10 What would be a good description of what activating prior knowledge means? O
A. Prior to reading, look at the end of the book or article.
O B. Before you read, recall knowledge you already have about the subject.
O C. Before you read, think about what you hope to learn.
O D. Before reading, find other material that is similar to what you are going to read ​

Answers

Answer:

B

Explanation:

Because activating prior knowledge means getting what you already know on the subject.

What is a precipitate?

1) A solid product of a chemical reaction that is in aqueous form.
2) A solid product of a chemical reaction that is not in aqueous form.

Answers

Answer: 1) A solid product of a chemical reaction that is in aqueous form.

True or false, The atomic number of an element is a whole number that decreases as you read across each row of
the periodic table from left to right.

Answers

Answer:

I believe it's false because the atomic number is the number of protons in the nucleus of an atom.

PLEASE HELP

Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma

Answers

Answer:

D. Microwave, Blue Visible Light, Ultraviolet, Gamma

Explanation:

colors longest to shortest are

red green blue violet

longest wavelength to shortest:

radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.

effect of air and water on iron and zinc

Answers

Answer:

Rust

Explanation:

it does cool chemical things

`Answer is subscribe to XoX Snead on YT Explanation: b is the answer!!

Which experiment led to the idea that atoms contain a nucleus?

Answers

Answer:

Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.

Explanation:

solve this question please!​

Answers

I don't know the answer ?

gujarati (language)

What is the percent by volume of alcohol, in a solution containing 24 mL of alcohol dissolved in 90 mL of water?

Answers

Answer:

use this formula it will help u .

Explanation:

If 60 ml of ethanol is diluted to a final volume of 400 ml, you create a 35 % ethanol solution.

First, realize that you creating a solution with that contains a polar solute (ethanol) with a polar solvent (water). Remember that "like dissolves like."

If you pour 60 ml of ethanol in a volumetric flask, you add 340 ml of water to dilute this solution to a final volume of 400 ml.

Volumetric flasks are designed to make or dilute solutions to specified final volume.

Since you have 60 ml of ethanol in a total solution of 400 ml, the percentage of ethanol is 35 %.

This result is obtained in the following manner.

ml/400. ml. = .35

.35 x 100% = 35 %

which hybridization is found in CO2?​

Answers

The answer is The type of hybridization in CO2 is sp hybridization, and each carbon atom forms two sp hybrid orbitals. Out of two hybrid orbitals, one will be used to produce a bond with one oxygen atom, and the other will be used to produce a bond with another oxygen atom.

Hope this helps :)

A typical scuba tank has a volume of 11 liters and can support a diver for one hour. An adult breathes about 3 liters of air with each breath.

How can an 11-liter tank give a diver enough oxygen for one hour?

Answers

Answer:

The correct answer is - at high pressure a huge amount of gases can be stored in less volume.

Explanation:

We already know that pressure is inversely proportional to the volume of gas which means if we increase the pressure the volume of gas becomes less.

P = 1/V

So in the scuba divers tank, the oxygen is filled at very high pressure so the high amount of the oxygen can be filled in less volume and which will last for longer than a normal pressure tank can last.

Which expression is equal to f(x) · g(x)?

Answers

Answer:

C. x⁴ + 6·x³ - 12·x  - 72

Explanation:

The given functions are;

[tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex]

g(x) = x³ -12

We have that [tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex] = [tex]f(x) =\sqrt{(x + 6)^2}[/tex] =  (x + 6)

Therefore;

f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = (x + 6) × (x³ - 12)

(x + 6) × (x³ - 12) = x⁴ - 12·x + 6·x³ - 72 = x⁴ + 6·x³ - 12·x  - 72

∴ f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = x⁴ + 6·x³ - 12·x  - 72

The biosphere is made of different kinds of matter. Which substance is an
example of inorganic matter?
O A. Iron
B. Fat
C. Glucose
D. Protein

Answers

A (iron) is inorganic
A. iron is an example of inorganic matter

a que llamamos niveles y subniveles de energia?

Answers

Answer:

agua

Explanation:

por que estamos en la planeta

Can someone please do a True or false for these PLEASE

Answers

My boy this is to easy it’s true

Answer:

true

false

false

true

false

true

true

false

false

true

true

Why is it essential for a calorimetry to be an insulated (closed) system?


A. The heat exchange must originate from only the reaction (system).

B. Thermal insulation minimizes energy loses to the atmosphere.

C. A and B

D. None of the Above

Answers

Answer:

B.Thermal insulation minimizes energy loses to the atmosphere.

Explanation:

It is important because it helps to stop hit from transferring from the calorimeter to the environment. This would help to have an accurate measurement of the heat that was used in the chemical process. The greatest cause of error that happens in calorimetry is when heat is lost to the environment. To reduce this, you insulate the calorimeter and add a cover.

Locations Cost of land Cost of equipment Cost of mining and reclamation Time taken to mine the area 1 $100,000 $10,000 $5,000 per day 30 days 2 $35,000 $6,000 $4,500 per day 45 days 3 $30,000 $7,500 $3,500 per day 120 days 4 $40,500 $8,000 $7,000 per day 65 days Considering all costs, which location will cost the least to the company to mine?

Answers

Answer:

Location 2 will cost the least to the company to mine.

Explanation:

a) Data and Calculations:

Locations  Cost of land     Cost of       Cost of mining      Time taken to

                                        equipment   and reclamation    mine the area

1                 $100,000      $10,000         $5,000 per day        30 days

2                 $35,000       $6,000          $4,500 per day        45 days

3                 $30,000       $7,500          $3,500 per day       120 days

4                 $40,500       $8,000          $7,000 per day        65 days

Locations  Cost of land     Cost of       Cost of mining                      Total

                                        equipment   and reclamation                    Costs

1                 $100,000      $10,000         $150,000 ($5,000 * 30)  $260,000

2                 $35,000       $6,000         $202,500 ($4,500 * 45)   $243,500

3                 $30,000       $7,500         $420,000 ($3,500 * 120)  $457,500

4                 $40,500       $8,000         $445,000 ($7,000 * 65)   $503,500

chapter 3 reactivity of metals mcq question and question and answer and important notes? ​

Answers

Answer:

resend again that question dear

need help asap!!!

so i don’t necessarily need an answer just how to solve everything.

this is the first one:
calcium hydroxide + ammonium chloride

the instructions are attached to this question. i’m just not sure how to do everything. it doesn’t give me the products side only the reactants so how am i supposed to write and balance the equation?

Answers

Explanation:

とおふぉくぉをえおろとようおいおぽあおそ・

'」*とまっぉのもヴぉこぉぞぽ、こ、

Answer:

Ca(OH)2 + 2NH4Cl .................. CaCl2 + 2NH3 + 2H2O

How would an increased level of acetyl-CoA be expected to affect the pyruvate dehydrogenase reaction

Answers

Answer:

The pyruvate dehydrogenase kinase enzyme activity would increase, resulting in an inhibition of pyruvate dehydrogenase activity. ... An in vitro study shows that isocitrate dehydrogenase is activated in the citrate cycle.

Explanation:

How does fluorine (F)differ from iodine(I)

A. Fluorine (F) has 3 more energy shells than iodine (I).

B. Fluorine (F) has 1 less energy shell than iodine (I).

C. Fluorine (F) has 1 more energy shell than iodine (I).

D. Fluorine (F) has 3 less energy shells than iodine (I).

Answers

I believe your answer is D. Fluorine (F) had 3 less energy shells than iodine (I)
Fluorine has 2 energy shells while iodine has 5 energy shells.
Subtract 5-2=3

Fluorine (F) and iodine(I) are the halogen elements that belong to group 17. They differ from each other as fluorine has 3 fewer energy shells than iodine. Thus, option D is correct.

What are halogen groups?

Halogen is a nonmetallic element that belongs to group 17 and consists of six elements namely fluorine, bromine, tennessine, chlorine, astatine, and iodine.

They are diatomic and have 7 valence electrons in the outer shell, which makes them highly reactive and electronegative. The shielding effect is less in F than I due to the closer placement and attraction of the valence electron to the nucleus.

Fluorine differs from iodine as it has a smaller size with fewer energy shells than iodine. Iodine has five energy shells,  whereas fluorine has two energy shells that make the difference of three shells between them.

Therefore, F and I differ from each other.

Learn more about fluorine and iodine here:

https://brainly.com/question/2005537

#SPJ5

Which of the compounds listed below would be considered ionic?

options:

NO2
­­P4S3
NiCl2
SO3
Nothing listed can be classified as an ionic substance.

Answers

Answer:

NICL2 are classified as an ionic substance

How are the boiling point and freezing point of a solvent affected when a solute is added?
Both the boiling point and the freezing point decrease.
Both the boiling point and the freezing point increase.
The boiling point increases, and the freezing point decreases.
The boiling point decreases, and the freezing point increases.

Answers

Answer:

this can helps you know the answer

Answer:

C.) The boiling point increases, and the freezing point decreases.

Explanation:

Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?

A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma

Answers

Answer:

For the wavelenth of light spectrum, I believe the order would be red visible light, infrared, microwaves and radio waves.

1. A) Calculate DO of water at 25 0 C, P 0 = 1.01x10 5 Pa; given: water vapor pressure (25 0 C) is 3.2x10 3 Pa and Henry constant of oxygen in water is 1.3x10 -8 mol/l.Pa b) How's DO content changed as increase or decrease water temperature? Explain.

Answers

Answer:

cfvgbhnjmk,

Explanation:

Can someone help me with this one :")

Answers

Answer:

i think is probably A

Explanation:

because at constant temperature, the product of the pressure and volume of a given mass of and ideal gass in a closed system is always constant

Answer:

I believe the answer is A or D

Explanation:

I hope this helps you out!

draw the flow chart of production of silk from silk moth

please help....
no links or get reported ​

Answers

Too lazy to draw sorry lol.

#CarryOnLearning

I actually just looked it up via image search.

just copy by hand either of the flow charts.

if you can, use colors to fill. makes it more interesting to look at

and define a circle (or rather a few points on it) to draw it neatly. the defined points can later be transformed into the arrows.

what is the atomic number of an atom that has 20 protons and 20 neutrons

Answers

Answer:

20

Explanation:

Hi there!

We need to find the atomic number of an atom that has 20 protons and 20 neutrons

the atomic number of an atom is equivalent to the amount of protons an atom has, as the number of protons determines what element an atom is.

Since the atom has 20 protons, the atomic number of the said atom is 20

Hope this helps!  

Because electrons are orbiting the nucleus, the nucleus is stationary

true or false​

Answers

Answer:

false, The nucleus of atoms still move around like crazy, it's just the electrons move more.

Other Questions
Last year Nancy weighted 37 5/8 pounds. This year she weighed 42.7 pounds. How much did she gain? Can someone help with questions 5 -9 What is the slope of the line whose equation is y-4=5/2(x-2)? Joe's Auto Insurance Company customers sometimes have to wait a long time to speak to acustomer service representative when they call regarding disputed claims. A random sampleof 25 such calls yielded a mean waiting time of 22 minutes with a standard deviation of 6minutes. Construct a 95% and 99% confidence interval for the population mean of suchwaiting times. Explain what these interval means. Georgia bought a pair of flip-flops that cost $3.46 and a pair of slip-on shoes that cost $9.87.She paid a total of $ for the two pairs of shoes. The word expensive means costing a lot Is ? what does LPG stand for? mention one important source of LPG give sort answer a bag contains 3 white balls and 4 red balls. A.second bag contains 4 white balls and 3 red balls. If a bag is picked at random from each bag. Find the probability that both are white In what city was the League ofNations located?A. SacramentoB. New YorkC. San FranciscoD. Atlanta lactase and carbonic annhydrase are examples of what type of substances What is the y-intercept of the line 10x - 5y = 40 solve for: 5 6 8 8 (show your work) answer pleaseee help Which of the following misguided theories led to the practice of forced sterilization, mostly of poor minorities, which continued in the U.S. until the 1960s?a. stereotype threat b. genetic engineering c. eogenes d. social revoce pleeeeaaasssseeeee help Find domain of (x^2+3)+[tex]\sqrt{x} 3x-1[/tex] Question 5 (Multiple Choice Worth 4 points)(02.07)Two similar triangles are shown below:562.594Which two sets of angles are corresponding angles?O O zp and Zs; zq and erO zp and Zt; 29 and usO zp and Zt; 29 and 2 give an short educational dtory that can be acted as a play which is very intellictual and easy to understand the passing message A 5,400 W motor is used to do work. If the motor is used for 640 s, about how much work could it do? 8.4 J 4,800 J 6,000 J 3,500,000 J A sample of 10.6 g of KNO3 was dissolved in 251.0 g of water at 25 oC in a calorimeter. The final temperature of the solution was 21.5 oC. What is the molar heat of solution of KNO3